Cell Adhesion Strength Research Articles

QCM-D analysis of material–cell interactions targeting a single cell during initial cell attachment

Abstract Clarifying material–cell interactions after eliminating various effects including cell–cell interactions is a very important issue in tissue and cell engineering. We investigated several cellular behaviors dynamically after growing cells individually one by one to eliminate cell–cell contact by direct observation using the quartz crystal microbalance with dissipation (QCM-D) and microscopy. The initial cellular behaviors of several cells (adsorption, attachment and spreading of L929 mouse fibroblasts) on the gold electrode of the QCM-D were classified into three regions according to the slope of the Df plots: I, cell adsorption and desorption; II, attachment and spreading; and III, secretion of microexudates. When the number of cells increased which leads to increase of cell–cell distance, region III disappeared and the slope of the Df plots in region II became steeper. The behavior related to the variation in the number of attached cells was indicated by the adhesion strength between the cells and the gold electrode. Furthermore, the slope of the Df plots was not shown on the (poly(2-methacryloyloxyethyl phosphorylcholine)– co –2-(methacryloyloxy)ethylthiol)-modified gold electrode and almost all of the cells were not attached to the polymer surface. The initial cell attachment behavior, especially the strength of cell adhesion to the material surface, was evaluated quantitatively by determining the slope of the Df plots using the QCM-D system.

Effect of the Hydrophobic Basal Layer of Thermoresponsive Block Co-Polymer Brushes on Thermally-Induced Cell Sheet Harvest

Thermoresponsive poly(benzyl methacrylate)-b-poly(N-isopropylacrylamide) (PBzMA-b-PIPAAm) block co-polymer brush surfaces were prepared by surface-initiated two-step reversible addition-fragmentation chain transfer radical (RAFT) polymerization. PBzMA brushes were fabricated on azoinitiator-immobilized glass substrates in the presence of dithiobenzoate (DTB) compound as a RAFT agent. The amount of grafted polymer was regulated by initial monomer concentrations. The second thermoresponsive blocks were added to the RAFT-related DTB groups located at PBzMA termini through the propagation of PIPAAm chains, resulting in formation of PBzMA-b-PIPAAm brushes. Surface characteristics of the block co-polymer brushes and its influence on thermally regulated cellular behavior were investigated using bovine carotid artery endothelial cells (BAECs), compared with PIPAAm brush surfaces. Cell adhesion/detachment behavior on thermoresponsive polymer brush surfaces significantly depended on their individual polymer architectures and chemical compositions of grafted polymers. Low-temperature treatment at 20°C, below the phase-transition temperature of PIPAAm, induced the spontaneous detachment of adhering cells from the PBzMA-b-PIPAAm brush surfaces with a higher rate than that from PIPAAm brush surfaces. In addition, the cell-repellent effect of the hydrophobic basal layer successfully accelerated for harvesting BAEC sheets from the block co-polymer brush surfaces. Unique features of thermoresponsive block co-polymer brush architectures can be applied to control cell-adhesion strength for enhancing cell adhesion or accelerating cell detachment.

In Vitro Cell Adhesion and Hemocompatibility of Carbon Nanotubes with CNx Coating

Multi-walled carbon nanotubes (MWCNTs) prepared by chemical vapor deposition (CVD) were sprayed on C wafers. Then, an 8 nm-thick CNx coating was deposited on MWCNTs by ion beam deposition (IBAD). The cell adhesion and hemocompatibility of MWCNTs with and without CNx coating were investigated using contact-angle measurements, cell- and platelet-adhesion assays, and hemolytic-rate testing. The results showed that mouse fibroblast cells (L929) cultured on MWCNTs with CNx coating displayed a higher cell-adhesion strength, viability, proliferation, and spreading than those on MWCNTs without CNx coating, indicating that CNx coating induced MWCNTs showed an increase in cytocompatibility. Despite MWCNTs with CNx coating displayed higher hemolytic and platelet adsorption rates than those on MWCNTs without CNx coating, its hemolytic rate values below 5% were acceptable. And CNx coating inhibited red blood cell adhesion and deformation. Good cell growth and hemocompatibility on MWCNTs with CNx coating were probably related to the positive contribution of nitrogen functional groups to hydrophilicity and the three-dimensional network configuration.

Engineered endothelial cell adhesion via VCAM1 and E-selectin antibody-presenting alginate hydrogels

Materials that adhere to the endothelial cell (EC) lining of blood vessels may be useful for treating vascular injury. Cell adhesion molecules (CAMs), such as endothelial leukocyte adhesion molecule-1 (E-selectin) and vascular cell adhesion molecule-1 (VCAM1), modulate EC–leukocyte interactions. In this study, we mimicked cell–cell interactions by seeding cells on alginate hydrogels modified with antibodies against E-selectin and VCAM1, which are upregulated during inflammation. ECs were activated with interleukin-1α to increase CAM expression and subsequently seeded onto hydrogels. The strength of cell adhesion onto gels was assessed via a centrifugation assay. Strong, cooperative EC adhesion was observed on hydrogels presenting a 1:1 ratio of anti-VCAM1:anti-E-selectin. Cell adhesion was stronger on dual functionalized gels than on gels modified with anti-VCAM1, anti-E-selectin or the arginine–glycine–aspartic acid (RGD) peptide alone. Anti-VCAM1:anti-E-selectin-modified hydrogels may be engineered to adhere the endothelium cooperatively.

Effect of Titanium Surface Calcium and Magnesium on Adhesive Activity of Epithelial-Like Cells and Fibroblasts

In the present study, we investigated the hydrothermal treatment of titanium with divalent cation solutions and its effect in promoting the adhesion of gingival epithelial cells and fibroblasts in vitro. Gingival keratinocyte-like Sa3 cells or fibroblastic NIH3T3 cells were cultured for 1 h on experimental titanium plates hydrothermally-treated with CaCl(2) (Ca) or MgCl(2) (Mg) solution, or distilled water (DW). The number and adhesive strengths of attached cells on the substrata were then analyzed. The number of Sa3 cells adhering to the Ca- and Mg-treated plates was significantly larger than in the DW group, but the strength of this adhesion did not differ significantly between groups. In contrast, NIH3T3 cell adhesion number and strength were increased in both the Ca and Mg groups compared to the DW group. Fluorescent microscopic observation indicated that, in all groups, Sa3 had identical expression levels of integrin β4 and development of actin filaments, whereas NIH3T3 cells in the Ca and Mg groups displayed much stronger punctate cytoplasmic signals for vinculin and more bundle-shaped actin filaments than cells in the DW group. As a result, it was indicated that the hydrothermal treatment of titanium with Ca or Mg solution improved the integration of soft tissue cells with the substrata, which may facilitate the development of a soft tissue barrier around the implant.

Low fibronectin concentration overcompensates for reduced initial fibroblasts adhesion to a nanoscale topography: Single-cell force spectroscopy

Using single-cell force spectroscopy, we compared the initial adhesion of L929 fibroblasts to planar and nanostructured silicon substrates as a function of fibronectin concentration. The nanostructures were periodically grooved with a symmetric groove-summit period of 180nm and a groove depth of 120nm. Cell adhesion strength to the bare nanostructure was lower (79%±13%) than to the planar substrate, which we attribute to reduced contact area. After pre-incubation with a low fibronectin concentration (5μg/ml) the adhesion strengths to both surfaces increased, with adhesion strength on the nanostructure outweighing that of the planar substrate by 133%±14%. At a high fibronectin concentration (25μg/ml) the adhesion strengths on both surfaces further increased and showed wide variations. In parallel, the nanostructure lost its clear advantage over the planar substrate. Our results demonstrate that cell adhesion is influenced by substrate topography and fibronectin, which mediate the interplay between specific interactions, non-specific interactions, and cell mechanics. Two parallel processes govern the initial adhesion strength: the detachment of the cell body from the substrate and the extraction of tethers from the cell membrane. The duration of the latter process is determined by tether lifetimes, and is a major contributor to the overall work required for cell–substrate detachment. Cell body detachment and tether lifetimes are affected by surface topography and may be strongly modulated by the presence of adsorbed proteins, whereas the tether extraction forces remained unchanged by these factors.

The RhoA-ROCK-PTEN pathway as a molecular switch for anchorage dependent cell behavior

The proliferation of anchorage-dependent cells of mesenchymal origin requires the attachment of the cells to substrates. Thus, cells that are poorly attached to substrates exhibit retarded cell cycle progression or apoptotic death. A major disadvantage of most polymers used in tissue engineering is their hydrophobicity; hydrophobic surfaces do not allow cells to attach firmly and, therefore, do not allow normal proliferation rates. In this study, we investigated the molecular mechanism underlying the reduced proliferation rate of cells that are poorly attached to substrates. There was an inverse relationship between the activity of the small GTPase RhoA (RhoA) and the cell proliferation rate. RhoA activity correlated inversely with the strength of cell adhesion to the substrates. The high RhoA activity in the cells poorly attached to substrates caused an increase in the activity of Rho-associated kinase (ROCK), a well-known effector of RhoA that upregulated the activity of phosphatase and tensin homolog (PTEN). The resulting activated PTEN downregulated Akt activity, which is essential for cell proliferation. Thus, the cells that were poorly attached to substrates showed low levels of cell proliferation because the RhoA-ROCK-PTEN pathway was hyperactive. In addition, RhoA activity seemed to be related to focal adhesion kinase (FAK) activity. Weak FAK activity in these poorly attached cells failed to downregulate the high RhoA activity that restrained cell proliferation. Interestingly, reducing the expression of any component of the RhoA-ROCK-PTEN pathway rescued the proliferation rate without physico-chemical surface modifications. Based on these results, we suggest that the RhoA-ROCK-PTEN pathway acts as a molecular switch to control cell proliferation and determine anchorage dependence. In cells that are poorly attached to substrates, its inhibition is sufficient to restore cell proliferation without the need for physico-chemical modification of the material surface.

Terminally Functionalized Thermoresponsive Polymer Brushes for Simultaneously Promoting Cell Adhesion and Cell Sheet Harvest

For preparing cell sheets effectively for cell sheet-based regenerative medicine, cell-adhesion strength to thermoresponsive cell culture surfaces need to be controlled precisely. To design new thermoresponsive surfaces via a terminal modification method, thermoresponsive polymer brush surfaces were fabricated through the surface-initiated reversible addition-fragmentation chain transfer (RAFT) radical polymerization of N-isopropylacrylamide (IPAAm) on glass substrates. The RAFT-mediated grafting method gave dithiobenzoate (DTB) groups to grafted PIPAAm termini, which can be converted to various functional groups. In this study, the terminal carboxylation of PIPAAm chains provided high cell adhesive property to thermoresponsive surfaces. Although cell adhesion is generally promoted by a decrease in the grafted PIPAAm amount, the decrease also decelerated thermally-induced cell detachment, whereas the influence of terminal modification was negligible on the cell detachment. Consequently, the terminally modified PIPAAm brush surfaces allowed smooth muscle cells (SMCs) to simultaneously adhere strongly and detach themselves rapidly. In this study, SMCs were unable to reach a confluent monolayer on as-prepared PIPAAm brush surfaces (grafted amount: 0.41 μg/cm(2)) without terminal carboxylation due to their insufficient cell-adhesion strength. On the other hand, though a decrease in the PIPAAm amount allowed SMCs to form a confluent cell monolayer on the PIPAAm brush surface, the SMCs were unable to be harvested as a monolithic cell sheet by low-temperature culture at 20 °C. Because of their unique property, only terminal-carboxylated PIPAAm brush surfaces achieved rapid harvesting of complete cell sheets by low-temperature culturing.

Regulation of Cell Adhesion Strength by Peripheral Focal Adhesion Distribution

Cell adhesion to extracellular matrices is a tightly regulated process that involves the complex interplay between biochemical and mechanical events at the cell-adhesive interface. Previous work established the spatiotemporal contributions of adhesive components to adhesion strength and identified a nonlinear dependence on cell spreading. This study was designed to investigate the regulation of cell-adhesion strength by the size and position of focal adhesions (FA). The cell-adhesive interface was engineered to direct FA assembly to the periphery of the cell-spreading area to delineate the cell-adhesive area from the cell-spreading area. It was observed that redistributing the same adhesive area over a larger cell-spreading area significantly enhanced cell-adhesion strength, but only up to a threshold area. Moreover, the size of the peripheral FAs, which was interpreted as an adhesive patch, did not directly govern the adhesion strength. Interestingly, this is in contrast to the previously reported functional role of FAs in regulating cellular traction where sizes of the peripheral FAs play a critical role. These findings demonstrate, to our knowledge for the first time, that two spatial regimes in cell-spreading area exist that uniquely govern the structure-function role of FAs in regulating cell-adhesion strength.

Controlling the migration behaviors of vascular smooth muscle cells by methoxy poly(ethylene glycol) brushes of different molecular weight and density

Cell migration is an important biological activity. Regulating the migration of vascular smooth muscle cells (VSMCs) is critical in tissue engineering and therapy of cardiovascular disease. In this work, methoxy poly(ethylene glycol) (mPEG) brushes of different molecular weight (Mw 2 kDa, 5 kDa and 10 kDa) and grafting mass (0–859 ng/cm 2) were prepared on aldehyde-activated glass slides, and were characterized by X-ray photoelectron spectrometer (XPS) and quartz crystal microbalance with dissipation (QCM-d). Adhesion and migration processes of VSMCs were studied as a function of different mPEG Mw and grafting density. We found that these events were mainly regulated by the grafting mass of mPEG regardless of mPEG Mw and grafting density. The VSMCs migrated on the surfaces randomly without a preferential direction. Their migration rates increased initially and then decreased along with the increase of mPEG grafting mass. The fastest rates (∼24 μm/h) appeared on the mPEG brushes with grafting mass of 300–500 ng/cm 2 depending on the Mw. Cell adhesion strength, arrangement of cytoskeleton, and gene and protein expression levels of adhesion related proteins were studied to unveil the intrinsic mechanism. It was found that the cell–substrate interaction controlled the cell mobility, and the highest migration rate was achieved on the surfaces with appropriate adhesion force.

Contractile Forces Contribute to Increased Glycosylphosphatidylinositol-anchored Receptor CD24-facilitated Cancer Cell Invasion

The malignancy of a tumor depends on the capability of cancer cells to metastasize. The process of metastasis involves cell invasion through connective tissue and transmigration through endothelial monolayers. The expression of the glycosylphosphatidylinositol-anchored receptor CD24 is increased in several tumor types and is consistently associated with increased metastasis formation in patients. Furthermore, the localization of β1-integrins in lipid rafts depends on CD24. Cell invasion is a fundamental biomechanical process and usually requires cell adhesion to the extracellular matrix (ECM) mainly through β1 heterodimeric integrin receptors. Here, we studied the invasion of A125 human lung cancer cells with different CD24 expression levels in three-dimensional ECMs. We hypothesized that CD24 expression increases cancer cell invasion through increased contractile forces. To analyze this, A125 cells (CD24 negative) were stably transfected with CD24 and sorted for high and low CD24 expression. The invasiveness of the CD24(high) and CD24(low) transfectants was determined in three-dimensional ECMs. The percentage of invasive cells and their invasion depth was increased in CD24(high) cells compared with CD24(low) cells. Knockdown of CD24 and of the β1-integrin subunit in CD24(high) cells decreased their invasiveness, indicating that the increased invasiveness is CD24- and β1-integrin subunit-dependent. Fourier transform traction microscopy revealed that the CD24(high) cells generated 5-fold higher contractile forces compared with CD24(low) cells. To analyze whether contractile forces are essential for CD24-facilitated cell invasion, we performed invasion assays in the presence of myosin light chain kinase inhibitor ML-7 as well as Rho kinase inhibitor Y27632. Cell invasiveness was reduced after addition of ML-7 and Y27632 in CD24(high) cells but not in CD24(neg) cells. Moreover, after addition of lysophosphatidic acid or calyculin A, an increase in pre-stress in CD24(neg) cells was observed, which enhanced cellular invasiveness. In addition, inhibition of the Src kinase or STAT3 strongly reduced the invasiveness of CD24(high) cells, slightly reduced that of CD24(low) cells, and did not alter the invasiveness of CD24(neg) cells. Taken together, these results suggest that CD24 enhances cell invasion through increased generation or transmission of contractile forces.

PIPKIγ Regulates Focal Adhesion Dynamics and Colon Cancer Cell Invasion

Focal adhesion assembly and disassembly are essential for cell migration and cancer invasion, but the detailed molecular mechanisms regulating these processes remain to be elucidated. Phosphatidylinositol phosphate kinase type Iγ (PIPKIγ) binds talin and is required for focal adhesion formation in EGF-stimulated cells, but its role in regulating focal adhesion dynamics and cancer invasion is poorly understood. We show here that overexpression of PIPKIγ promoted focal adhesion formation, whereas cells expressing either PIPKIγK188,200R or PIPKIγD316K, two kinase-dead mutants, had much fewer focal adhesions than those expressing WT PIPKIγ in CHO-K1 cells and HCT116 colon cancer cells. Furthermore, overexpression of PIPKIγ, but not PIPKIγK188,200R, resulted in an increase in both focal adhesion assembly and disassembly rates. Depletion of PIPKIγ by using shRNA strongly inhibited formation of focal adhesions in HCT116 cells. Overexpression of PIPKIγK188,200R or depletion of PIPKIγ reduced the strength of HCT116 cell adhesion to fibronection and inhibited the invasive capacities of HCT116 cells. PIPKIγ depletion reduced PIP2 levels to ∼40% of control and PIP3 to undetectable levels, and inhibited vinculin localizing to focal adhesions. Taken together, PIPKIγ positively regulates focal adhesion dynamics and cancer invasion, most probably through PIP2-mediated vinculin activation.

Effects of nanometric roughness on surface properties and fibroblast's initial cytocompatibilities of Ti6AI4V

Titanium alloy (Ti6Al4V) has widespread medical applications because of its excellent biocompatibility. Its biological responses can further be enhanced by polishing and passivation. Unfortunately, preparing titanium alloy samples of nanometric roughness is by far much more difficult than preparing those of micrometric roughness, and numerous investigations on roughness induced effects are all focused on micrometric scales. For the remedy, we investigate, at nanometric scale, the influence of roughness on surface properties and biological responses. Six groups of Ti6Al4V with average roughness (R(a)) values of 2.75-30.34 nm are prepared. The results indicated that nanometric roughness of samples change the wettability and amphoteric OH groups. The contact angles monotonically decrease from 2.75 to 30.34 nm and the rougher surfaces lead to higher wettability. The in vitro cell-culture studies, using Murine NIH-3T3 fibroblasts, showed the spindle-shaped morphology on rougher surface compared to round∕spherical morphology on smoother surface. A cytodetacher is employed to quantitatively measure the initial adhesion force of fibroblasts to specimen. The adhesion strength of fibroblasts, ranging from 55 to 193 nN, is significantly influenced by the nanometric roughness while the surface is within the range of 2.75-30.34 nm R(a) roughness, and the adhesion strength appeared stronger for rougher surface. The cell number on the smoother surface is higher than on the rougher surface at 5-day culture. The studies indicated that nanometric roughness would alter the surface properties and further influence cell morphology, adhesion strength, and proliferation.

Actin Fusion Proteins Alter the Dynamics of Mechanically Induced Cytoskeleton Rearrangement

Mechanical forces can regulate various functions in living cells. The cytoskeleton is a crucial element for the transduction of forces in cell-internal signals and subsequent biological responses. Accordingly, many studies in cellular biomechanics have been focused on the role of the contractile acto-myosin system in such processes. A widely used method to observe the dynamic actin network in living cells is the transgenic expression of fluorescent proteins fused to actin. However, adverse effects of GFP-actin fusion proteins on cell spreading, migration and cell adhesion strength have been reported. These shortcomings were shown to be partly overcome by fusions of actin binding peptides to fluorescent proteins. Nevertheless, it is not understood whether direct labeling by actin fusion proteins or indirect labeling via these chimaeras alters biomechanical responses of cells and the cytoskeleton to forces. We investigated the dynamic reorganization of actin stress fibers in cells under cyclic mechanical loading by transiently expressing either egfp-Lifeact or eyfp-actin in rat embryonic fibroblasts and observing them by means of live cell microscopy. Our results demonstrate that mechanically-induced actin stress fiber reorganization exhibits very different kinetics in EYFP-actin cells and EGFP-Lifeact cells, the latter showing a remarkable agreement with the reorganization kinetics of non-transfected cells under the same experimental conditions.

Migration responses of outer and inner meniscus cells to applied direct current electric fields

Injuries to the inner regions of the knee meniscus do not heal and can result in degenerative changes to the articular surface, ultimately leading to osteoarthritis. A possible stimulus to enhance meniscus healing is to use electric fields that induce galvanotaxis. In this study, a novel characterization of the effects of direct current electric fields on migration characteristics of meniscus cells was performed. Primary and passaged inner and outer meniscus cells were exposed to varying electric field strengths from 0 to 6 V/cm. Cell migration was tracked using time lapse digital photography, and cell displacement and cathodal direct velocity were quantified. Cytoskeletal staining was performed to examine actin distribution and nuclear content. Cell adhesion strength was quantified as a function of wall shear stress. Meniscus cells exhibited cathodal migration and cell elongation perpendicular to the applied electric field accompanied by actin reorganization. Outer meniscus cells migrated quicker and exhibited lower adhesion strengths when compared to inner meniscus cells. Passaged cells exhibited higher migration characteristics when compared to primary cells. Overall, this study demonstrated that electric fields can significantly enhance and direct meniscus cell migration and suggests the potential for their incorporation in strategies of meniscus repair and tissue engineering.

The difference of fibroblast behavior on titanium substrata with different surface characteristics

Connective tissue, one of the main components of peri-implant soft tissue, is key to the formation of the peri-implant mucosal seal and helping to prevent epithelial ingrowth. Rough surfaces (Rs), machined surfaces (Ms) or microgrooved surface (MG) are used in the neck area of commercially available titanium implants. In this paper, we aimed to evaluate the influence of surface topography of titanium substratum on connective tissue fibroblasts to gain a better understanding of this effect. Fibroblasts were cultured on titanium plates with Rs, Ms and MG. Adhesion cell number at day 3 was compared and protein distribution of both F-actin and vinculin was determined to observe cellular structure and adhesion. Cell adhesion strength was compared on each surface. At day 3, the number of fibroblasts attached on each substratum was in the order of MG ≈ Ms > Rs. Fibroblasts strongly expressed vinculin in the peripheral area on Ms and MG, and showed strong F-actin architecture. Decreased expression of vinculin and weaker continuity of F-actin were observed on Rs. Fibroblasts on MG were aligned along the grooves, with a significantly higher cell density, whereas cells on Ms and Rs had no clear orientation. The cell adhesion strength was significantly lower on Rs, and no significant difference was seen between MG and Ms. Both MG and Ms showed greater adhesion cell numbers and adhesion strength of fibroblasts when compared with Rs at day 3. The cell density on MG was greater than those on other substrata.

Nucleus pulposus cell-matrix interactions with laminins

The cells of the nucleus pulposus (NP) region of the intervertebral disc play a critical role in this tissue's generation and maintenance, and alterations in NP cell viability, metabolism, and phenotype with aging may be key contributors to progressive disc degeneration. Relatively little is understood about the phenotype of NP cells, including their cell-matrix interactions which may modulate phenotype and survival. Our previous work has identified strong and region-specific expression of laminins and laminin cell-surface receptors in immature NP tissues, suggesting laminin cell-matrix interactions are uniquely important to the biology of NP cells. Whether these observed tissue-level laminin expression patterns reflect functional adhesion behaviors for these cells is not known. In this study, we examined NP cell-matrix interactions with specific matrix ligands, including various laminin isoforms, using quantitative assays of cell attachment, spreading, and adhesion strength. NP cells were found to attach in higher numbers and exhibited rapid cell spreading and higher resistance to detachment force on two laminin isoforms (LM-511,LM-332) identified to be uniquely expressed in the NP region, as compared to another laminin isoform (LM-111) and several other matrix ligands (collagen, fibronectin). Additionally, NP cells were found to attach in higher numbers to laminins as compared to cells isolated from the disc's annulus fibrosus region. These findings confirm that laminin and laminin receptor expression documented in NP tissues translates into unique functional NP cell adhesion behaviors that may be useful tools for in vitro cell culture and biomaterials that support NP cells.

The Calcium-Sensing Receptor-Dependent Regulation of Cell–Cell Adhesion and Keratinocyte Differentiation Requires Rho and Filamin A

Extracellular Ca(2+) (Ca(2+)(o)) functioning through the calcium-sensing receptor (CaR) induces E-cadherin-mediated cell-cell adhesion and cellular signals mediating cell differentiation in epidermal keratinocytes. Previous studies indicate that CaR regulates cell-cell adhesion through Fyn/Src tyrosine kinases. In this study, we investigate whether Rho GTPase is a part of the CaR-mediated signaling cascade regulating cell adhesion and differentiation. Suppressing endogenous Rho A expression by small interfering RNA (siRNA)-mediated gene silencing blocked the Ca(2+)(o)-induced association of Fyn with E-cadherin and suppressed the Ca(2+)(o)-induced tyrosine phosphorylation of β-, γ-, and p120-catenin and formation of intercellular adherens junctions. Rho A silencing also decreased the Ca(2+)(o)-stimulated expression of terminal differentiation markers. Elevating the Ca(2+)(o) level induced interactions among CaR, Rho A, E-cadherin, and the scaffolding protein filamin A at the cell membrane. Inactivation of CaR expression by adenoviral expression of a CaR antisense complementary DNA inhibited Ca(2+)(o)-induced activation of endogenous Rho. Ca(2+)(o) activation of Rho required a direct interaction between CaR and filamin A. Interference of CaR-filamin interaction inhibited Ca(2+)(o)-induced Rho activation and the formation of cell-cell junctions. These results indicate that Rho is a downstream mediator of CaR in the regulation of Ca(2+)(o)-induced E-cadherin-mediated cell-cell adhesion and keratinocyte differentiation.

Differences in cytocompatibility and hemocompatibility between carbon nanotubes and nitrogen-doped carbon nanotubes

The cytocompatibility and hemocompatibility of multiwalled carbon nanotubes and N-doped multiwalled carbon nanotubes grown on carbon papers by chemical vapor deposition were investigated. These materials were characterized using contact-angle measurements, cell- and platelet-adhesion assays, and hemolytic-rate testing, revealing significant effects of nitrogen doping in carbon nanotubes. The results showed that mouse fibroblast cells and mouse adipose-derived stem cells cultured on N-doped multiwalled carbon nanotubes displayed the higher cell-adhesion strength, viability, proliferation, and stretching than those on multiwalled carbon nanotubes without N doping and carbon paper, indicating that N-doped multiwalled carbon nanotubes possessed good cytocompatibility. No toxicity reactions were observed during the culturing period. It also displayed the lowest hemolytic rate.

The effect of matrix stiffness on the differentiation of mesenchymal stem cells in response to TGF-β

Bone marrow mesenchymal stem cells (MSCs) are a valuable cell source for tissue engineering and regenerative medicine. Transforming growth factor β (TGF-β) can promote MSC differentiation into either smooth muscle cells (SMCs) or chondrogenic cells. Here we showed that the stiffness of cell adhesion substrates modulated these differential effects. MSCs on soft substrates had less spreading, fewer stress fibers and lower proliferation rate than MSCs on stiff substrates. MSCs on stiff substrates had higher expression of SMC markers α-actin and calponin-1; in contrast, MSCs on soft substrates had a higher expression of chondrogenic marker collagen-II and adipogenic marker lipoprotein lipase (LPL). TGF-β increased SMC marker expression on stiff substrates. However, TGF-β increased chondrogenic marker expression and suppressed adipogenic marker expression on soft substrates, while adipogenic medium and soft substrates induced adipogenic differentiation effectively. Rho GTPase was involved in the expression of all aforementioned lineage markers, but did not account for the differential effects of substrate stiffness. In addition, soft substrates did not significantly affect Rho activity, but inhibited Rho-induced stress fiber formation and α-actin assembly. Further analysis showed that MSCs on soft substrates had weaker cell adhesion, and that the suppression of cell adhesion strength mimicked the effects of soft substrates on the lineage marker expression. These results provide insights of how substrate stiffness differentially regulates stem cell differentiation, and have significant implications for the design of biomaterials with appropriate mechanical property for tissue regeneration.