cDNA Synthesis Step Research Articles

Improvement in the sensitivity of viroid detection by adapting the reverse transcription step in one-step RT-qPCR assays

Over the course of developing and applying a new real-time PCR assay for the detection of the newly described apple chlorotic fruit spot viroid (ACFSVd), slight modifications of the reverse transcription (RT) step were found to improve significantly the detection limit of the assay. To prove this hypothesis, three different one-step RT-qPCR kits for the detection of three plant viroids and three plant viruses were compared. The results showed both extension of the RT reaction time from 10 or 15 min–30 min or the increase in reaction temperature from 49 to 52 °C for the cDNA synthesis step results in a 10 times higher sensitivity for potato spindle tuber viroid and apple scar skin viroid one-step RT-qPCR assay and 45 higher sensitivity for ACFSVd one-step RT-qPCR assay. No variation in the detection limit was observed when the modifications were tested on tomato brown rugose fruit virus, plum pox virus and tomato ringspot virus assays. This finding is highly valuable for the investigation of viroids in general and could contribute to enhance sensitivity in their detection and to benefit regulatory outcomes for national plant protection organisations.

Probing In Vivo Structure of Individual mRNA 3' Isoforms Using Dimethyl Sulfate.

The DMS region extraction and deep sequencing (DREADS) procedure was designed to probe RNA structure in vivo and to link this structural information to specific 3' isoforms. Growing cells are treated with the alkylating agent dimethyl sulfate (DMS), which enters easily into cells and modifies RNA molecules at solvent-exposed A and C residues. RNA is isolated, and sequencing libraries are constructed in a manner that preserves the identities of individual mRNA isoforms arising from alternative cleavage/polyadenylation sites. During the cDNA synthesis step of library construction, the progress of reverse transcriptase (RT) is blocked when it encounters a DMS modification on the RNA, leading to disproportionate cDNA termination adjacent to DMS-modified positions. After paired-end deep sequencing, the downstream end of each sequenced fragment is mapped to a specific cleavage/poly(A) site representing an individual mRNA 3' isoform. The upstream mapped end of the sequenced fragment defines where the RT reaction stopped. Over the population of all sequenced fragments derived from a particular isoform, A and C positions that are overrepresented next to the upstream endpoints in the DMS sample (relative to a parallel untreated control) are inferred to have been DMS modified, and hence solvent exposed. This method thus allows in vivo structural information obtained using DMS to be linked to individual mRNA 3' isoforms. © 2019 by John Wiley & Sons, Inc.

A multiplex RNA quantification method to determine the absolute amounts of mRNA without reverse transcription

We have developed a highly sensitive microarray-based method that determines the absolute amounts of mRNA in a total RNA sample in a multiplex manner without reverse transcription. This direct mRNA measurement promotes high-throughput testing and reduces bias in transcriptome analyses. Furthermore, quantification of the absolute amount of mRNA allows transcriptome analysis without common controls or additional, complicated normalization. The method, called Photo-DEAN, was validated using chemically synthesized RNAs of known quantities and mouse liver total RNA samples. We found that the absolute amounts of mRNA were successfully measured without the cDNA synthesis step, with a sensitivity of 15 zmol achieved in 7 h.

Simultaneous Analysis of Micro‐RNA and DNA for Determining the Body Fluid Origin of DNA Profiles,

Micro-RNAs (miRNAs) can be specifically expressed in forensically relevant body fluids such as blood or saliva. The aim of the study was to develop a simultaneous extraction and analysis protocol that allows for the acquisition of a DNA profile and the identity of the body fluid using a single process. DNA and micro-RNA were extracted from blood and saliva before undergoing a cDNA synthesis step by using stem-loop reverse transcription PCR. The resulting extracts containing DNA and cDNA synthesized from body fluid-specific miRNA markers then underwent standard STR analysis using a modified ABI AmpFℓSTR(®) NGM SElect™ kit. In all samples, a full DNA profile was obtained along with additional peaks corresponding to the miRNA marker targeted. In all cases, blood samples profiled exhibited a peak indicating the presence of the blood-specific miRNA marker and the saliva sample profiled exhibited a peak indicating the presence of the saliva-specific miRNA marker.

Development and Application of Reverse Transcription Loop‐Mediated Isothermal Amplification for Detecting Live Shewanella putrefaciens in Preserved Fish Sample

Given that live Shewanella putrefaciens is one of the major causes of spoilage for aquatic products even in chill storage, the rapid and accurate detection process is the first priority. In the present study, a novel reverse transcription loop-mediated isothermal amplification (RT-LAMP) detecting assay was developed by targeting internal transcribed spacer (ITS) sequence between 16S and 23S rRNA. At the same time, a new procaryotic mRNA isolation strategy was also established by introducing a polyA tail to RNA during cDNA synthesis step. Under the optimal reaction time (60 min) and temperature (64.1 °C), S. putrefaciens could be specially identified from a variety of other tested bacteria by RT-LAMP. The sensitivity analysis showed that RT-LAMP could be identified as lower as 5.4 copies per reaction, which is over 200-fold higher than that of standard PCR (1.08 × 10³ copies per reaction). The method could be effectively identified S. putrefaciens in artificially contaminated or spoilaged fish samples with dose-dependent manners. To our knowledge, this is the first report using RT-LAMP assay to detect live S. putrefaciens in fish. The study provided a rapid and accurate detection method for live bacteria in aquatic food and established a new procaryotic mRNA isolation strategy at the same time, which will be useful for food preservation.

Identification of a Replication-independent Replacement Histone H3 in the Basidiomycete Ustilago maydis

Ustilago maydis is a haploid basidiomycete with single genes for two distinct histone H3 variants. The solitary U1 gene codes for H3.1, predicted to be a replication-independent replacement histone. The U2 gene is paired with histone H4 and produces a putative replication-coupled H3.2 variant. These predictions were evaluated experimentally. U2 was confirmed to be highly expressed in the S phase and had reduced expression in hydroxyurea, and H3.2 protein was not incorporated into transcribed chromatin of stationary phase cells. Constitutive expression of U1 during growth produced ~25% of H3 as H3.1 protein, more highly acetylated than H3.2. The level of H3.1 increased when cell proliferation slowed, a hallmark of replacement histones. Half of new H3.1 incorporated into highly acetylated chromatin was lost with a half-life of 2.5 h, the fastest rate of replacement H3 turnover reported to date. This response reflects the characteristic incorporation of replacement H3 into transcribed chromatin, subject to continued nucleosome displacement and a loss of H3 as in animals and plants. Although the two H3 variants are functionally distinct, neither appears to be essential for vegetative growth. KO gene disruption transformants of the U1 and U2 loci produced viable cell lines. The structural and functional similarities of the Ustilago replication-coupled and replication-independent H3 variants with those in animals, in plants, and in ciliates are remarkable because these distinct histone H3 pairs of variants arose independently in each of these clades and in basidiomycetes.

Direct RNA sequencing

Our understanding of human biology and disease is ultimately dependent on a complete understanding of the genome and its functions. The recent application of microarray and sequencing technologies to transcriptomics has changed the simplistic view of transcriptomes to a more complicated view of genome-wide transcription where a large fraction of transcripts emanates from unannotated parts of genomes, and underlined our limited knowledge of the dynamic state of transcription. Most of this broad body of knowledge was obtained indirectly because current transcriptome analysis methods typically require RNA to be converted to complementary DNA (cDNA) before measurements, even though the cDNA synthesis step introduces multiple biases and artefacts that interfere with both the proper characterization and quantification of transcripts. Furthermore, cDNA synthesis is not particularly suitable for the analysis of short, degraded and/or small quantity RNA samples. Here we report direct single molecule RNA sequencing without prior conversion of RNA to cDNA. We applied this technology to sequence femtomole quantities of poly(A)(+) Saccharomyces cerevisiae RNA using a surface coated with poly(dT) oligonucleotides to capture the RNAs at their natural poly(A) tails and initiate sequencing by synthesis. We observed transcript 3' end heterogeneity and polyadenylated small nucleolar RNAs. This study provides a path to high-throughput and low-cost direct RNA sequencing and achieving the ultimate goal of a comprehensive and bias-free understanding of transcriptomes.

Increased Thermostability and Fidelity of DNA Synthesis of Wild-Type and Mutant HIV-1 Group O Reverse Transcriptases

Reverse transcription coupled with DNA amplification has become a well-established and powerful molecular technique for studying ribonucleic acids. However, the efficiency of those reactions is largely dependent on the molecular properties of currently used reverse transcriptases (RTs). Engineered and natural RT variants with improved thermostability and fidelity of DNA synthesis should be of great utility in the amplification of RNA targets. In this study, we demonstrate that the wild-type (WT) HIV-1 group O (O_WT) RT shows increased thermostability in comparison with Moloney murine leukemia virus RT and a prototypic HIV-1 group M:subtype B (BH10_WT) RT, while rendering higher yields in reverse transcription PCRs that included a cDNA synthesis step performed at a high temperature range (57–69 °C). In addition, the O_WT RT showed 2.5-fold increased accuracy in M13 lacZα forward mutation assays in comparison with the BH10_WT RT. Unlike the BH10_WT enzyme, O_WT RT showed a very low error rate for frameshifts. Mutational hot spots induced by O_WT RT occurred at nucleotide runs, suggesting a dislocation-mediated mechanism for the generation of base substitutions. In HIV-1 group O RT, substituting Ile75 for Val rendered an enzyme that was 1.9 and 4.7 times more faithful than O_WT RT and BH10_WT RTs, respectively, in forward mutation assays. The mutant RT also showed increased misinsertion and mispair extension fidelity in kinetic assays. However, its mutational spectrum was similar to that obtained with the WT group O polymerase. V75I caused a loss of efficiency of reverse transcription PCR amplifications at 65 and 68 °C in comparison with O_WT RT. However, a double mutant devoid of RNase H activity (V75I/E478Q) was found to reverse-transcribe at temperatures as high as 68 °C, while maintaining the increased accuracy of the V75I mutant.

Detection and quantitation of Solenopsis invicta virus in fire ants by real-time PCR

A quantitative real-time PCR (QPCR) method was developed to detect and quantify the amount of Solenopsis invicta virus (SINV) infecting individual ants of S. invicta. The two-step method utilized a gene-specific oligonucleotide primer targeting the SINV RNA-dependent RNA polymerase (RdRp) for cDNA synthesis. Dithiothreitol used in the cDNA synthesis step was found to significantly decrease the detection sensitivity for SINV RdRp and was therefore omitted. SINV RdRp cDNA was then quantified by QPCR using SYBR Green dye and a standard curve generated from SINV RdRp plasmid clones. A standard curve was successfully constructed from clones of the SINV RdRp region. A strong linear relationship [ r 2 = 0.998; y = (−3.63 ± 0.37) x + (39.19 ± 1.33)] between C T and starting SINV RdRp copy number was observed within a dynamic range of 5–5 × 10 6 copies. SINV RdRp copy number was determined with the optimized QPCR method in individual S. invicta ants taken from an infected field colony. Worker ants exhibited the highest RdRp copy number (2.1 × 10 9 copies/worker ant) and pupae exhibited the lowest (4.2 × 10 2 copies/pupa). Mean RdRp copy number was lowest in early larvae and pupae. Overall, SINV RdRp copy number increased through larval development, sharply declined during pupation, then sharply increased in adults.

Selective amplification of RNA utilizing the nucleotide analog dITP and Thermus thermophilus DNA polymerase.

The ability to selectively amplify RNA in the presence of genomic DNA of analogous sequence is cumbersome and requires implementation of critical controls for genes lacking introns. The convenient approaches of either designing oligonucleotide primers at the splice junction or differentiating the target sequence based on the size difference obtained by the presence of the intron are not possible. Our strategy for the selective amplification of RNA targets is based on the enzymology of a single thermostable DNA polymerase and the ability to modulate the strand separation temperature requirements for PCR amplification. Following reverse transcription of the RNA by recombinant Thermus thermophilus DNA polymerase (rTth pol), the resulting RNAxDNA hybrid is digested by the RNase H activity of rTth pol, allowing the PCR primer to hybridize and initiate second-strand cDNA synthesis. Substitution of one or more conventional nucleotides with nucleotide analogs that decrease base stacking interactions and/or hydrogen bonding (e.g. hydroxymethyldUTP or dITP) during the first- and second-strand cDNA synthesis step reduces the strand separation temperature of the resultant DNAxDNA duplex. Alteration of the thermal cycling parameters of the subsequent PCR amplification, such that the strand separation temperature is below that required for denaturation of genomic duplex DNA composed of standard nucleotides, prevents the genomic DNA from being denatured and therefore amplified.

Detection of HCV RNA by the asymmetric gap ligase chain reaction.

The ligase chain reaction (LCR) and the gap ligase chain reaction (gLCR) are exponential amplification techniques for the detection of DNA sequences in a sample. Both techniques depend on the enzyme, DNA ligase, to join adjacent probes annealed to a DNA molecule. However, DNA ligase joins DNA inefficiency on an RNA target. Consequently, LCR and gLCR cannot amplify RNA efficiency. RNA detection methods using LCR or gLCR require a cDNA synthesis step. The carryover of four dNTPs from the cDNA reaction inhibits gLCR. Although LCR can use cDNA reaction products directly, background generated by blunt-end ligation does not allow the high sensitivity typically needed for HIV or HCV detection. The asymmetric gap ligase chain reaction (AGLCR) is a modification of gLCR that allows for the detection of RNA by using < or = 3 of the 4 nucleotides in the cDNA step and the gLCR step. Fewer than 50 copies of synthetic RNA transcript can be reproducibly detected. HCV, an RNA virus with no DNA intermediate, was chosen as the initial RNA model system. HCV antibody-positive and normal samples were analyzed, and the results were found to correlate with the results obtained using nested RNA-PCR. AGLCR provides a new nucleic acid amplification technique that can aid in the diagnosis of disease when the detection of RNA is critical.

Transcription-based amplification system and detection of amplified human immunodeficiency virus type 1 with a bead-based sandwich hybridization format.

The in vitro amplification of biologically important nucleic acids has proceeded principally by a strategy of DNA replication. Polymerase chain reaction was the first such protocol to achieve this goal. In this report, a transcription-based amplification system (TAS) is described. Each cycle of the TAS is composed of two steps. The first is a cDNA synthesis step that produces one copy of a double-stranded DNA template for each copy of RNA or DNA target nucleic acid. During the course of this cDNA synthesis step, a sequence recognized by a DNA-dependent RNA polymerase is inserted into the cDNA copy of the target sequence to be amplified. The second step is the amplification of the target sequence by the transcription of the cDNA template into multiple copies of RNA. This procedure has been applied to the detection of human immunodeficiency virus type 1 (HIV-1)-infected cells. After four cycles of TAS, the amplification of the vif region of the HIV-1 RNA genome was measured to be, on the average, 38- to 47-fold per cycle, resulting in a 2-5 x 10(6)-fold increase in the copy number of the original target sequence. This amplification by the TAS protocol allows the detection of fewer than one HIV-1-infected CEM cell in a population of 10(6) uninfected CEM cells. Detection of the TAS-generated RNA from HIV-1-infected cells can easily be accomplished by means of a bead-based sandwich hybridization protocol, which provides additional specificity for the identification of the amplified HIV-1-specific sequence.