Configuration Of Cation Research Articles

Engineering novel alkalides with superalkali clusters: Ab initio insights into nonlinear optical responses

ABSTRACT We designed novel alkalides such as FLi2-M-OLi3 and FLi2-M-NLi4 (M = Li, Na, K), along with OLi3-M-NLi4 (M = Li, Na) by interacting alkali metal atoms with heterogeneous superalkali clusters in anionic, neutral and cationic configurations. The stability of these superalkali based alkalides are confirmed by its binding energy (Eb ). Utilising QTAIM method, the bond strength and nature of bond have been analysed. NPA charge analysis is conducted to forecast charge transfer and also to confirm the alkalide character of the complex along with the electron localisation function (ELF) analysis. The HOMO–LUMO gap analysis is performed to analyse electrical conductivity and chemical reactivity. The nonlinear optical (NLO) properties have been investigated by polarisability and first-order static hyperpolarizibilty (β0 ), which is found to be as high as 2.77 × 107 a. u. for (OLi3-Li-NLi4)+ complex. The UV-Vis spectra and electronic transitions are used to explain the enhanced NLO responses. The study not only identifies new alkalide candidates but also presents strategies to significantly improve their NLO properties, which may be useful in nonlinear optics and optoelectronics.

Cation Configuration and Structural Degradation of Layered Transition Metal Oxides in Sodium-Ion Batteries.

Given the pressing depletion of lithium resources, sodium-ion batteries (SIBs) stand out as a cost-effective alternative for energy storage solutions in the near future. Layered transition metal oxides (LTMOs) emerge as the leading cathode materials for SIBs due to their superior specific capacities and abundant raw materials. Nonetheless, achieving long-term stability in LTMOs for SIBs remains a challenge due to the inevitable structural degradation during charge-discharge cycles. The complexity and diversity of cation configurations/superstructures within the transition metal layers (TMO2) further complicate the understanding for newcomers. Therefore, it is critical to summarize and discuss the factors leading to structural degradation and the available strategies for enhancing LTMOs' stability. In this review, the cationic configurations of TMO2 layers are introduced from a crystallographic perspective. It then identifies and examines four key factors responsible for structural decay, alongside the impacts of various modification strategies. Finally, more effective and practical research approaches for investigating LTMOs have been proposed. The work aims to enhance the comprehension of the structural deterioration of LTMOs and facilitate a substantial improvement in their cycle life and energy density.

Simulation of microtextural evolution in omphacite: Ordering transformation kinetics as unexplored archives of slab eclogitization

Earth's subduction zone processes and surface environments are intricately governed by mass transfer phenomena at plate convergent boundaries. The determination of their rates and timings from high-pressure metamorphic rocks (e.g., eclogite), or remnants of ancient convergent boundaries, remains an ongoing challenge. Here, we proposed the potential and versatility of ordering transformation kinetics of omphacite, an essential mineral found in eclogite, as a dynamic recorder of the metamorphic history. Through macroscopic phase-field simulation, we explored the growth of antiphase domains (APDs) in metastable disordered omphacite, discussing the feasibility of constraining metamorphic reaction kinetics based on the size and morphology of omphacite APDs in eclogitized oceanic crust. Our simulation corroborated that omphacite nucleating later during the prograde metamorphism can exhibit an incompletely ordered state with sparsely distributed ordered domains, which suggests their usefulness in estimating the recrystallization timing of the omphacite. Additionally, we confirmed that the APD formation dynamics are significantly influenced by the initial cation configuration of the disordered matrix. This implies the APD morphology in natural omphacite under slab-surface conditions may reflect their precipitation kinetics. These findings provide valuable insights into the microtextural evolution of omphacite due to its ordering transformation, thereby enhancing our ability to interpret morphological features.

Advances and challenges in molecular engineering of 2D/3D perovskite heterostructures.

Organic-inorganic hybrid perovskites have been intensively studied in past decades due to their outstanding performance in solar cells and other optoelectronic devices. Recently, the emergence of two-dimensional/three-dimensional (2D/3D) heterojunctions have enabled many solar cell devices with >25% power conversion efficiency, driven by advances in our understanding of the structural and photophysical properties of the heterojunctions and our ability to control these properties through organic cation configuration in 2D perovskites. In this feature article, we discuss a fundamental understanding of structural characteristics and the carrier dynamics in the 2D/3D heterojunctions and their impact factors. We further elaborate the design strategies for the molecular configuration of organic cations to achieve thorough management of these properties. Finally, recent advances in 2D/3D heterostructures in solar cells, light-emitting devices and photodetectors are highlighted, which translate fundamental understandings to device applications and also reveal the remaining challenges in ligand design for the next generation of stable devices. Future development prospects and related challenges are also provided, with wide perspectives and insightful thoughts.

Bright insights: Examining fluorescence behavior using 5,7‐dibromo‐8‐hydroxyquinoline in organic–inorganic hybrid materials

Expanding on prior research with 8‐hydroxyquinoline (8hq) derivatives, this study investigates 5,7‐dibromo‐8‐hydroxyquinoline (8hqBr2) as a ligand in organic–inorganic hybrid materials (OIHMs). A series of 19 compounds and two of its salts were synthesized, employing d‐ and p‐block metal halides to explore the effect of solid‐state supramolecular structures on emission properties. Through the use of density functional theory (DFT), this work emphasizes the critical role of the bromine position within the ligand, contrasting with its effect when located exclusively in halogenometallate anions. The findings reveal that emission is profoundly influenced by π–π stacking, anion‐π interactions, and the configuration of metal cations and bromine substituents. This study not only provides insights into the specific impact of bromine positioning in 8hqBr2 on fluorescence but also contributes to the development of advanced emitters for optoelectronics and sensing, enhancing the understanding of fluorescence modulation in 8‐hydroxyquinoline‐based OIHMs.

BaCoO2 with Tetrahedral Cobalt Coordination: The Missing Element to Understand Energy Storage and Conversion Applications in BaCoO3-δ-Based Materials.

Barium-cobaltate-based perovskite (BaCoO3-δ) and barium-cobaltate-based nanocomposites have been intensively studied in energy storage and conversion devices mainly due to flexible oxygen stoichiometry and tunable nonprecious transition metal oxidation states. Although a rich and complex family of structural polymorphs has already been reported for these perovskites in the literature, the potential structural evolution that may occur during the oxygen reduction reaction and the oxygen evolution reaction has not been investigated so far. In this study, we synthesized and characterized the lowest Co-oxidation state possible in the compound, BaCoO2, which exhibits a quartz-derived, trigonal structure with a helicoidally corner-sharing, CoO4-tetrahedral-framework as already proposed by Spitsbergen et al. Oxygen can reversibly be inserted in such a crystal structure to form BaCoO3-δ, i.e., with 0 ≤ δ ≤ 1, based on the results of an in situ coupled thermogravimetric - neutron diffraction study and which presents therefore giant oxygen capacity storage due to the extreme tunability of the electronic configuration of the cobalt cations which defines the fundamental origins of the materials performance. The reversible conversion of BaCoO2 to BaCoO3-δ associated with a similar electronic conductivity above 900 K permits to clarify the high potential of BaCoO3-δ-based energy storage and conversion devices.

Disentangling the effects of structure and lone-pair electrons in the lattice dynamics of halide perovskites

Halide perovskites show great optoelectronic performance, but their favorable properties are paired with unusually strong anharmonicity. It was proposed that this combination derives from the ns2 electron configuration of octahedral cations and associated pseudo-Jahn–Teller effect. We show that such cations are not a prerequisite for the strong anharmonicity and low-energy lattice dynamics encountered in these materials. We combine X-ray diffraction, infrared and Raman spectroscopies, and molecular dynamics to contrast the lattice dynamics of CsSrBr3 with those of CsPbBr3, two compounds that are structurally similar but with the former lacking ns2 cations with the propensity to form electron lone pairs. We exploit low-frequency diffusive Raman scattering, nominally symmetry-forbidden in the cubic phase, as a fingerprint of anharmonicity and reveal that low-frequency tilting occurs irrespective of octahedral cation electron configuration. This highlights the role of structure in perovskite lattice dynamics, providing design rules for the emerging class of soft perovskite semiconductors.

Local Ordering, Distortion, and Redox Activity in (La0.75Sr0.25)(Mn0.25Fe0.25Co0.25Al0.25)O3 Investigated by a Computational Workflow for Compositionally Complex Perovskite Oxides.

Mixing multiple cations can result in a significant configurational entropy, offer a new compositional space with vast tunability, and introduce new computational challenges. For applications such as the two-step solar thermochemical hydrogen (STCH) generation techniques, we demonstrate that using density functional theory (DFT) combined with Metropolis Monte Carlo method (DFT-MC) can efficiently sample the possible cation configurations in compositionally complex perovskite oxide (CCPO) materials, with (La0.75Sr0.25)(Mn0.25Fe0.25Co0.25Al0.25)O3 as an example. In the presence of oxygen vacancies (VO), DFT-MC simulations reveal a significant increase of the local site preference of the cations (short-range ordering), compared to a more random mixing without VO. Co is found to be the redox-active element and the VO is the preferentially generated next to Co due to the stretched Co-O bonds. A clear definition of the vacancy formation energy (Evf) is proposed for CCPO in an ensemble of structures evolved in parallel from independent DFT-MC paths. By combining the distribution of Evf with VO interactions into a statistical model, the oxygen nonstoichiometry (δ), under the STCH thermal reduction and oxidation conditions, is predicted and compared with the experiments. Similar to the experiments, the predicted δ can be used to extract the enthalpy and entropy of reduction using the van't Hoff method, providing direct comparisons with the experimental results. This procedure provides a full predictive workflow for using DFT-MC to obtain possible local ordering or fully random structures, understand the redox activity of each element, and predict the thermodynamic properties of CCPOs, for computational screening and design of these CCPO materials at STCH conditions.

Bulk Photovoltaic Effect Induced by Non-Covalent Interactions in Bilayered Hybrid Perovskite for Efficient Passive X-Ray Detection.

Hydrogen bonding as a multifunctional tool has always influenced the structure of hybrid perovskites. Compared with the research on hydrogen bonding, the study of halogen-halogen interactions on the structure and properties of hybrid perovskites is still in its early stages. Herein, a polar bilayered hybrid perovskite (IEA)2FAPb2I7 (IEA+ is 2-iodoethyl-1-ammonium, FA is formamidinium) with iodine-substituted spacer is successfully constructed by changing the configuration of interlayer cations and regulating non-covalent interactions at the organic-inorganic interface, which shows a shorter interlayer spacing and higher density (ρ = 3.862gcm-3). The generation of structure polarity in (IEA)2FAPb2I7 is caused by the synergistic effect of hydrogen bonding and halogen-halogen interactions. Especially, as the length of the carbon chain in organic cations decreases, the I---I interaction in the system gradually strengthens, which may be the main reason for the symmetry-breaking. Polarity-induced bulk photovoltaics (Voc = 1.0V) and higher density endow the device based on (I-EA)2FAPb2I7 exhibit a high sensitivity of 175.6µCGy-1cm-2 and an ultralow detection limit of 60.4nGys-1 at 0V bias under X-ray irradiation. The results present a facile approach for designing polar multifunctional hybrid perovskites, also providing useful assistance for future research on halogen-halogen interactions.

Variable Mechanical Properties in Layered Copper Bromide Hybrid Solids Based on Configuration of Organic Cations.

Organic-inorganic organohalide hybrid solids have garnered significant attention due to their unique structural diversity, desirable electronic structures, and excellent optoelectronic properties. Here, we investigate the mechanical properties of a homologous series of 2D copper bromide hybrids (A2CuBr4, ACuBr4) through nanoindentation to analyze the contribution of organic interlayer interactions to bulk mechanical response. We identify a direct correlation between the identity of the organic spacer and the bulk mechanical response, where stronger bonding interactions in the organic interlayer resulted in increased hardness and elasticity. Additionally, we uncover a unique conformational dependence within the series of arylammonium spacers which was found to periodically modulate pi-pi interactions between neighboring molecules, leading to an alternating even-odd bulk material response.

Understanding Alkene Interaction with Metal-Modified Zeolites: Thermodynamics and Mechanism of Bonding in the π-Complex.

Zeolites modified with metal cations are perspective catalysts for converting light alkenes to valuable chemicals. A crucial step of the transformation is an alkene interaction with zeolite to afford π-complex with metal cations. The mechanism of alkene bonding with cations is still unclear. To address this problem, propene adsorption on H+ (Bro̷nsted acid site), Na+, Ca2+, Zn2+, Co2+, Cu2+, Cu+, and Ag+ cationic sites in ZSM-5 zeolite has been studied by quantum chemical calculations in terms of adsorption enthalpy, νC═C frequency, and natural bond orbital (NBO) analysis together with natural energy decomposition analysis (NEDA). It is revealed that the conventional concept of σ- and π-bonding is only partially applicable to alkene interaction with metal cations in zeolites. The orbital interaction between an alkene molecule and a metal site is more complex. Several different bonding mechanisms have been identified depending on the nature and electron configuration of the metal cation. This finding explains the complex correlations observed for propene π-complex stability and νC═C frequency shift or charge transfer from the alkene molecule. The results provide the basis for further understanding the interactions between alkenes and inorganic solid Bro̷nsted and Lewis acids.

Interlayer Magnetic Exchange Mechanism of Bilayer Transition‐Metal Trihalides

AbstractLayer‐ and stacking‐dependent interlayer magnetism observed in bilayer has attracted a lot of attention recently. Although considerable efforts have been made, the interlayer exchange mechanism still lacks a clear physical picture. In this paper, orbital overlap‐dependent super‐super‐exchange (SSE) interactions are proposed to understand the interlayer magnetism of bilayer (M = Cr, Fe, and Mo; X = Cl, Br, and I) with different stacking orders. The detailed atom‐ and orbital‐resolved magnetic exchange couplings are evaluated to reveal the underlying mechanism. The results suggest that the interlayer magnetic ground state of all bilayers are antiferromagnetism (AFM) due to the electronic configuration of cation. While and are found to possess stacking‐dependent interlayer magnetism due to the competition between AFM and ferromagnetism (FM), the dominant interlayer AFM exchange couplings are the and for and , respectively, indicating different underlying mechanisms. These distinct interlayer magnetism can be consistently understood by the number and strength of SSE paths, which can be determined by the rule based on the orbital overlap of mediating anions. Moreover, the atom‐ and orbital‐resolved magnetic exchange couplings are also evaluated in detail, which are in good agreement with the above qualitative mechanism. This work provides detailed information and insight for understanding the stacking‐dependent interlayer magnetism, which is beneficial for the application of 2D magnetic materials.

Dynamic Lone Pairs and Fluoride-Ion Disorder in Cubic-BaSnF4.

Introducing compositional or structural disorder within crystalline solid electrolytes is a common strategy for increasing their ionic conductivity. (M,Sn)F2 fluorites have previously been proposed to exhibit two forms of disorder within their cationic host frameworks: occupational disorder from randomly distributed M and Sn cations and orientational disorder from Sn(II) stereoactive lone pairs. Here, we characterize the structure and fluoride-ion dynamics of cubic BaSnF4, using a combination of experimental and computational techniques. Rietveld refinement of the X-ray diffraction (XRD) data confirms an average fluorite structure with {Ba,Sn} cation disorder, and the 119Sn Mössbauer spectrum demonstrates the presence of stereoactive Sn(II) lone pairs. X-ray total-scattering PDF analysis and ab initio molecular dynamics simulations reveal a complex local structure with a high degree of intrinsic fluoride-ion disorder, where 1/3 of fluoride ions occupy octahedral "interstitial" sites: this fluoride-ion disorder is a consequence of repulsion between Sn lone pairs and fluoride ions that destabilizes Sn-coordinated tetrahedral fluoride-ion sites. Variable-temperature 19F NMR experiments and analysis of our molecular dynamics simulations reveal highly inhomogeneous fluoride-ion dynamics, with fluoride ions in Sn-rich local environments significantly more mobile than those in Ba-rich environments. Our simulations also reveal dynamical reorientation of the Sn lone pairs that is biased by the local cation configuration and coupled to the local fluoride-ion dynamics. We end by discussing the effect of host-framework disorder on long-range diffusion pathways in cubic BaSnF4.

A-Site Cation Disorder in SrxBa1-xNb2O6 (x = 0.25, 0.33, 0.50, 0.61) Studied by High-Resolution Resonant X-ray Powder Diffraction.

The dielectric and ferroelectric properties of SrxBa1-xNb2O6 (SBN, 0.2 < x < 0.8) are known to be affected by the Sr fraction and can be further controlled by various quenching schemes. Changes in A-site cation configuration are believed to be linked to these changes in properties. In this work, we study the A-site cation disorder in SBN by the use of high-resolution resonant X-ray powder diffraction. The experimental results show that the larger Ba2+ is found exclusively on the larger A2 site, while Sr2+ is found on both the A1 and A2 sites, with an increasing amount on A2 with an increasing Sr fraction. At elevated temperatures, a small migration of Sr2+ from A1 to A2 is observed for SBN50 and SBN61. Linking this change in occupancies to changes in the average cation size on the A1 and A2 sites allows for rationalization of the property changes observed for quenched samples. Furthermore, SBN25 is shown to deviate from the tetragonal P4bm structure and is found to be orthorhombic with a Cmm2 structure.

High-Field Nonresonant Response of Zundel Cations to Intense Terahertz Radiation

The fundamental unit for comprehending the physicochemical properties of water, the Zundel cation configuration H5O2+, has yet to be exhaustively evaluated in terms of its interaction with terahertz (THz) electromagnetic waves, characterized by sub-picosecond oscillation periods or pulse widths. In this study, we embark on an investigation of the broad resonance and high-field nonresonant effects of intense THz radiation (ITR) on Zundel cations, utilizing a multifaceted methodological approach that includes density functional theory (DFT) calculations, finite difference time domain (FDTD) algorithm of the Schrödinger equation, and ab initio molecular dynamics (AIMD) simulations. Our analysis reveals that the proton potential energy surface (PES) varies in response to the external electric (E) field, suggesting that the interaction frequency of the central proton with the electromagnetic wave encompasses the THz band. This resonance effect is associated with proton behavior that may oscillate or demonstrate periodic tunneling. Moreover, our work uncovers the high-field nonresonant effects of ITR on Zundel cations, manifesting in proton transfer and vibrational excitation of the system. Our findings contribute to the understanding of the interaction between Zundel species and electromagnetic waves by presenting a microscopic view of proton transfer as informed by wavefunction evolution.

Identifying the Role of the Cationic Geometric Configuration in Spinel Catalysts for Polysulfide Conversion in Sodium-Sulfur Batteries.

An AB2X4 spinel structure, with tetrahedral A and octahedral B sites, is a paradigmatic class of catalysts with several possible geometric configurations and numerous applications, including polysulfide conversion in metal-sulfur batteries. Nonetheless, the influence of the geometric configuration and composition on the mechanisms of catalysis and the precise manner in which spinel catalysts facilitate the conversion of polysulfides remain unknown. To enable controlled exposure of single active configurations, herein, Cotd2+ and Cooh3+ in Co3O4 catalysts for sodium polysulfide conversion are in large part replaced by Fetd2+ and Feoh3+, respectively, generating FeCo2O4 and CoFe2O4. Through an examination of electrochemical activation energies, the characterization of symmetric cells, and theoretical calculations, we determine that Cooh3+ serves as the active site for the breaking of S-S bonds, while Cotd2+ functions as the active site for the formation of S-Na bonds. The current study underlines the subtle relationship between activity and geometric configurations of spinel catalysts, providing unique insights for the rational development of improved catalysts by optimizing their atomic geometric configuration.

Role of water structural properties in interaction of amino acids with metal ions of varying size and electrons in d-block or main group elements: Quantitative thermodynamic analysis

Interactions of a homologous series of amino acids (glycine, l-alanine, DL-α-amino-n-butyric acid, l-valine and l-leucine) with salts (LiCl, NaCl, KCl, CaCl2, MnCl2, CoCl2) having common anion, but cation having varying d-electronic configuration and alkaline earth metals have been studied in aqueous solutions employing ultrasensitive isothermal titration calorimetry. Standard molar enthalpies of amino acid-salt interactions have been interpreted in terms of predominant ionic association between charged centres and the corresponding desolvation penalty. Extra crystal field stabilization experienced by Mn2+(aq) and Ca2+(aq) due to d5 and d10 electronic configuration has been addressed based on results of standard molar enthalpies of interaction. The results indicate significant desolvation cost predominantly from hydration of the cations of the salts rather than from hydration of zwitter-ionic ends of the amino acids irrespective of their chain length. This is also indicated by stronger endothermic interaction of the amino acids with the bivalent cations than that with the monovalent ones. The results obtained in this work provide essential mechanistic insights into nature of amino acid interactions modulated by variation in cationic d-electronic configuration in terms of enthalpies of interaction.

Electrochemical molecular intercalation and exfoliation of solution-processable two-dimensional crystals.

Electrochemical molecular intercalation of layered semiconducting crystals with organic cations followed by ultrasonic exfoliation has proven to be an effective approach to producing a rich family of organic/inorganic hybrid superlattices and high-quality, solution-processable 2D semiconductors. A traditional method for exfoliating 2D crystals relies on the intercalation of inorganic alkali metal cations. The organic cations (e.g., alkyl chain-substituted quaternary ammonium cations) are much larger than their inorganic counterparts, and the bulky molecular structure endows distinct intercalation and exfoliation chemistry, as well as molecular tunability. By using this protocol, many layered 2D crystals (including graphene, black phosphorus and versatile metal chalcogenides) can be electrochemically intercalated with organic quaternary alkylammonium cations. Subsequent solution-phase exfoliation of the intercalated compounds is realized by regular bath sonication for a short period (5-30 min) to produce free-standing, thin 2D nanosheets. It is also possible to graft additional ligands on the nanosheet surface. The thickness of the exfoliated nanosheets can be measured by using atomic force microscopy and Raman spectroscopy. Modifying the chemical structure and geometrical configuration of alkylammonium cations results in different exfoliation behavior and a family of versatile organic/inorganic hybrid superlattices with tunable physical/chemical properties. The whole protocol takes ~6 h for the successful production of stable, ultrathin 2D nanosheet dispersion in solution and another 11 h for depositing thin films and transferring them onto an arbitrary surface. This protocol does not require expertise beyond basic electrochemistry knowledge and conventional colloidal nanocrystal synthesis and processing.

Tuning Phase Purity in Chiral 2D Perovskites

AbstractThe introduction of chiral organic spacers in low‐dimensional metal‐halide perovskites triggers chiroptical activity, which is appealing for spintronic applications. However, a comprehensive understanding of structure formation and the ability to control phase purity in such materials have yet to be developed. Herein, the impact of processing conditions on the phase purity, microstructure, and chiroptical properties of chiral 2D perovskites is explored. The anisotropic emergence of a 1D perovskite inside the 2D matrix and its dependence on the organic cation chirality, solvent, and thermal annealing conditions are shown. By controlling these parameters, the in‐plane conductivity of the films is nearly doubled. Furthermore, it is demonstrated, for the first time, that solvent choice and the spatial configuration of the organic cation can have an impact on the residual lattice strain and the energetic disorder of the system. The fundamentals presented here can help to improve the film deposition methods for low‐dimensional chiral perovskites, offering strategies to control phase purity.

Two Novel Two-Dimensional Organic-Inorganic Hybrid Lead Halides with Broadband Emission for White-Light-Emitting Diodes.

Low-dimensional organic-inorganic metal halides (LOMHs) recently have attracted much attention due to their tunable crystal structures and excellent photoelectric properties. The configuration and arrangement of organic cations in LOMHs have significant effect on the structure of inorganic frameworks and luminescence properties. In this work, we systematically explored the "spatial effect" and "hydrogen bonding effect" of organic cations on the structure and properties of LOMHs, by synthesizing three LOMHs including (N-AD)PbCl4, (N-AD)2Pb2Br7, and (N-AD)4Pb3I12 (N-AD: N-acetylethylenediamine, C4H10N2O). Specifically, (110)-oriented two-dimensional (N-AD)PbCl4 and (N-AD)2Pb2Br7 with manifest blue-white emissions, originating from the free excitons (FEs) and self-trapped excitons (STEs), respectively. The UV-pumped light-emitting diode (LED)-based on (N-AD)2Pb2Br7 was prepared, and the highest color rendering index (CRI) and correlated color temperature (CCT) were up to 80 and 4484 K, respectively. This proves its potential application in solid-state lighting.