Cathode Material For Sodium-ion Batteries Research Articles

Anchored VN Quantum Dots Boosting High Capacity and Cycle Durability of Na3V2(PO4)3@NC Cathode for Aqueous Zinc-Ion Battery and Organic Sodium-Ion Battery.

Na3V2(PO4)3 is a promising high-voltage cathode for aqueous zinc-ion batteries (ZIBs) and organic sodium-ion batteries (SIBs). However, the poor rate capability, specific capacity, and cycling stability severely hamper it from further development. In this work, Na3V2(PO4)3 (NVP) with vanadium nitride (VN) quantum dots encapsulated by nitrogen-doped carbon (NC) nanoflowers (NVP/VN@NC) are manufactured as cathode using in situ nitridation, carbon coating, and structural adjustment. The outer NC layer increases the higher electronic conductivity of NVP. Furthermore, VN quantum dots with high theoretical capacity not only improve the specific capacity of pristine NVP, but also serve as abundant "pins" between NVP and NC to strengthen the stability of NVP/VN@NC heterostructure. For Zn-ion storage, these essential characteristics allow NVP/VN@NC to attain a high reversible capacity of 135.4mAhg-1 at 0.1Ag-1, and a capacity retention of 91% after 2000 cycles at 5Ag-1. Meanwhile, NVP/VN@NC also demonstrates to be a stable cathode material for SIBs, which can reach a high reversible capacity of 124.5mAhg-1 at 0.1Ag-1, and maintain 92% of initial capacity after 11000 cycles at 5Ag-1. This work presents a feasible path to create innovative high-voltage cathodes with excellent reaction kinetics and structural stability.

First-principles study of high-entropy sulfides and their alkali metal-doped modification as cathode material for sodium-ion batteries.

High-entropy materials (HEMs) have been explored as high-capacity cathode materials for sodium-ion batteries (SIBs) due to their excellent structural stability and abundant metal redox sites. Among them, high-entropy sulfides (HESs) have greater potential and more extensive research than high-entropy oxides, as they exhibit higher charging voltage and theoretical capacity as cathodes. Furthermore, alkali metal doping of HESs can further enhance their performance and broaden their application fields. Inspired by the cocktail effect of HEMs, we performed the first theoretical calculation of the properties of Na(MnFeCoNi)1/2S and its Li-doped derivative, Na7/8Li1/8(MnFeCoNi)1/2S, to understand their potential as SIB cathode materials. Using density functional theory based on first principles, we investigated the structure and electronic characteristics of Na(MnFeCoNi)1/2S and Na7/8Li1/8(MnFeCoNi)1/2S, and calculated their theoretical voltage and capacity, respectively. Compared with Na(MnFeCoNi)1/2S, Na7/8Li1/8(MnFeCoNi)1/2S showed better electronic performance in reducing the band gap and increasing the density of states, ultimately providing a specific capacity of 160.3 mAh·g-1 and a charging voltage of 4.85 V in sodium-ion storage. Moreover, Na7/8Li1/8(MnFeCoNi)1/2S exhibited remarkable structural stability throughout the sodium-ion deintercalation process, thus it can be reasonably concluded that Na7/8Li1/8(MnFeCoNi)1/2S can serve as an excellent cathode material for future SIB applications.

Revealing the Nature of Binary-Phase on Structural Stability of Sodium Layered Oxide Cathodes.

The emergence of layered sodium transition metal oxides featuring a multiphase structure presents a promising approach for cathode materials in sodium-ion batteries (SIBs), showcasing notably improved energy storage capacity. However, the advancement of cathodes with multiphase structures faces obstacles due to the limited understanding of the integrated structural effects. Herein, we comprehend the integrated structural effects by an in-depth structure-chemistry analysis in the developed layered cathode system NaxCu0.1Co0.1Ni0.25Mn0.4Ti0.15O2 with purposely designed P2/O3 phase integration. Our results affirmed that integrated phase ratio plays a pivotal role in electrochemical/structural stability, particularly at high voltage and with the incorporation of anionic redox. In contrast to previous reports advocating solely for the enhanced electrochemical performance in biphasic structures, we demonstrated an inappropriate composite structure is more destructive than a single-phase design. The in situ X-ray diffraction (XRD) results, coupled with density functional theory (DFT) computations further confirm the biphasic structure with P2:O3 = 4:6 shows suppressed irreversible phase transition at high desodiated states and thus exhibits optimized electrochemical performance. These fundamental discoveries provide clues to the design of high-performance layered oxide cathodes for next-generation SIBs. This article is protected by copyright. All rights reserved.

Regulating Interfacial Compositions to Build a Stable Superlattice Structure of Layered Oxide Cathode Materials for Sodium-Ion Batteries

Regulating Interfacial Compositions to Build a Stable Superlattice Structure of Layered Oxide Cathode Materials for Sodium-Ion Batteries

Four-Electron Redox Reaction in Prussian Blue Analogue Cathode Material for High-Performance Sodium-Ion Batteries

Four-Electron Redox Reaction in Prussian Blue Analogue Cathode Material for High-Performance Sodium-Ion Batteries

Exploration of Mixed Polyanionic Compound for Potential High-Voltage Cathode Materials in Sodium-Ion Batteries

Exploration of Mixed Polyanionic Compound for Potential High-Voltage Cathode Materials in Sodium-Ion Batteries

High-Entropy Configuration Strategy to Build High Performance Na-Ion Layered Oxide Cathodes Derived from Simple Techniques.

Layered transition metal oxides are commonly used as the cathode materials in sodium-ion batteries due to their low cost and easy manufacturing. However, the application is hindered by poor rate performance and complex phase transitions. To address these challenges, a new seven-component high-entropy layered oxide cathode material, O3-NaNi0.25Fe0.15Mn0.3Ti0.1Sn0.05Co0.05Li0.1O2 (HEO) has been developed. The entropy stabilization effect plays a crucial role in improving the performance of electrochemical systems and the stability of structures. The HEO exhibits a specific discharge capacity of 154.1 mA h g-1 at 0.1 C and 94.5 mA h g-1 at 7 C. In-situ and ex-situ XRD results demonstrate that the HEO effectively retards complex phase transitions. This work provides a high-entropy design for the storage materials with a high energy density. Meanwhile, it eliminates industry doubts about the performance of sodium ion layered oxide cathode materials.

Mesoporous hollow Fe4[Fe(CN)6)]3 hierarchical nanocrystal architecture for advanced sodium-ion batteries

Prussian blue (PB) has been broadly recognized as promising cathode materials for sodium-ion batteries (SIBs) due to its large interstitial space and robust frame structure, whereas their applications are impeded by unsatisfied long-term cyclability and poor rate capability due to its inherent lattice defects. Herein, we report to fabricate the mesoporous hollow Fe4(Fe(CN)6)3 (one kind of PB) hierarchical nanocrystal architecture by the hydrothermal crystallization and HCl etching of the mesoporous precursor Fe4[Fe(CN)6]3 cubic particles, leading to high crystallinity and large specific surface area. The resultant Fe4[Fe(CN)6]3 cathode for SIBs exhibits a good reversibility and cycling stability with a capacity retention of 75.6 % at 0.5 C after 200 cycles as well as superb rate capability featuring a stable discharge specific capacity of 30.2 mAh g−1 at as high as 10 C, demonstrating the fast kinetics and low polarization of electrochemical reaction, which might be ascribed to the unique architecture and high crystallinity. This offers a new route to designing PB cathode of for SIBs with high rate capabilities.

Manipulating Local Chemistry and Coherent Structures for High-Rate and Long-Life Sodium-Ion Battery Cathodes.

Layered sodium transition-metal (TM) oxides generally suffer from severe capacity decay and poor rate performance during cycling, especially at a high state of charge (SoC). Herein, an insight into failure mechanisms within high-voltage layered cathodes is unveiled, while a two-in-one tactic of charge localization and coherent structures is devised to improve structural integrity and Na+ transport kinetics, elucidated by density functional theory calculations. Elevated Jahn-Teller [Mn3+O6] concentration on the particle surface during sodiation, coupled with intense interlayer repulsion and adverse oxygen instability, leads to irreversible damage to the near-surface structure, as demonstrated by X-ray absorption spectroscopy and in situ characterization techniques. It is further validated that the structural skeleton is substantially strengthened through the electronic structure modulation surrounding oxygen. Furthermore, optimized Na+ diffusion is effectively attainable via regulating intergrown structures, successfully achieved by the Zn2+ inducer. Greatly, good redox reversibility with an initial Coulombic efficiency of 92.6%, impressive rate capability (86.5 mAh g-1 with 70.4% retention at 10C), and enhanced cycling stability (71.6% retention after 300 cycles at 5C) are exhibited in the P2/O3 biphasic cathode. It is believed that a profound comprehension of layered oxides will herald fresh perspectives to develop high-voltage cathode materials for sodium-ion batteries.

Constructing a Size-Controllable Spherical P2-Type Layered Oxides Cathode That Achieves Practicable Sodium-Ion Batteries.

P2-type layered metal oxides are regarded as promising cathode materials for sodium-ion batteries due to their high voltage platform and rapid Na+ diffusion kinetics. However, limited capacity and unfavorable cycling stability resulting from inevitable phase transformation and detrimental structure collapse hinder their future application. Herein, based on P2-type Na0.67Ni0.18Mn0.67Cu0.1Zn0.05O2, we synthesized a series of secondary spherical morphology cathodes with different radii derived from controlling precursors prepared by a coprecipitation method, which can be promoted to large-scale production. Consequently, the synthesized materials possessed a high tap density of 1.52 g cm-3 and a compacted density of 3.2 g cm-3. The half cells exhibited a specific capacity of 111.8 mAh g-1 at a current density of 0.1 C as well as an 82.64% capacity retention with a high initial capacity of 85.80 mAh g-1 after 1000 cycles under a rate of 5 C. Notably, in situ X-ray diffraction revealed a reversible P2-OP4 phase transition and displayed a tiny volume change of 6.96% during the charge/discharge process, indicating an outstanding cycling stability of the modified cathode. Commendably, the cylindrical cell achieved a capacity of 4.7 Ah with almost no change during 1000 cycles at 2 C, suggesting excellent potential for future applications.

Air Corrosion of Layered Cathode Materials for Sodium-Ion Batteries: Cation Mixing and a Practical Suppression Strategy.

Layered oxide cathodes of sodium-ion batteries (SIBs) are considered promising candidates due to their fascinating high capacity, good cyclability, and environmental friendliness. However, the air sensitivity of layered SIB cathodes causes high electrode manufacturing costs and performance deterioration, hampering their practical application. Herein, a commercial O3-type layered Na(Ni1/3Fe1/3Mn1/3)O2 (NNFM) material is adopted to investigate the air corrosive problem and the suppression strategy. We reveal that once the layered material comes in contact with ambient air, cations migrate from transition metal (TM) layers to sodium layers at the near surface, although Na+ and TM ions show quite different ion radii. Experimental results and theoretical calculations show that more Ni/Na disorder occurs in the air-exposed O3-NNFM materials, owing to a lower Ni migration energy barrier. The cation mixing results in detrimental structural distortion, along with the formation of residual alkali species on the surface, leading to high impedance for Na+ diffusion during charge/discharge. To tackle this problem, an ultrathin and uniform hydrophobic molecular layer of perfluorodecyl trimethoxysilane is assembled on the O3-NNFM surface, which significantly suppresses unfavorable chemistry and structure degradation during air storage. The in-depth understanding of the structural degradation mechanism and suppression strategy presented in this work can facilitate high-energy cathode manufacturing from the perspective of future practical implementation and commercialization.

High stability of Cu-doped O3-type NaNi1/3Fe1/3Mn1/3O2 cathode material for sodium-ion battery

High stability of Cu-doped O3-type NaNi1/3Fe1/3Mn1/3O2 cathode material for sodium-ion battery

Interfacial Spinel Local Interlocking Strategy Toward Structural Integrity in P3 Oxide Cathodes.

P3-layered transition oxide cathodes have garnered considerable attention owing to their high initial capacity, rapid Na+ kinetics, and less energy consumption during the synthesis process. Despite these merits, their practical application is hindered by the substantial capacity degradation resulting from unfavorable structural transformations, Mn dissolution and migration. In this study, we systematically investigated the failure mechanisms of P3 cathodes, encompassing Mn dissolution, migration, and the irreversible P3-O3' phase transition, culminating in severe structural collapse. To address these challenges, we proposed an interfacial spinel local interlocking strategy utilizing P3/spinel intergrowth oxide as a proof-of-concept material. As a result, P3/spinel intergrowth oxide cathodes demonstrated enhanced cycling performance. The effectiveness of suppressing Mn migration and maintaining local structure of interfacial spinel local interlocking strategy was validated through depth-etching X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, and in situ synchrotron-based X-ray diffraction. This interfacial spinel local interlocking engineering strategy presents a promising avenue for the development of advanced cathode materials for sodium-ion batteries.

Achieving a Deeply Desodiated Stabilized Cathode Material by the High Entropy Strategy for Sodium-ion Batteries.

Manganese-based layered oxides are currently of significant interest as cathode materials for sodium-ion batteries due to their low toxicity and high specific capacity. However, the practical applications are impeded by sluggish intrinsic Na+ migration and poor structure stability as a result of Jahn-Teller distortion and complicated phase transition. In this study, a high-entropy strategy is proposed to enhance the high-voltage capacity and cycling stability. The designed P2-Na0.67Mn0.6Cu0.08Ni0.09Fe0.18Ti0.05O2 achieves a deeply desodiation and delivers charging capacity of 158.1 mA h g-1 corresponding to 0.61 Na with a high initial Coulombic efficiency of 98.2%. The charge compensation is attributed to the cationic and anionic redox reactions conjunctively. Moreover, the crystal structure is effectively stabilized, leading to a slight variation of lattice parameters. This research carries implications for the expedited development of low-cost, high-energy-density cathode materials for sodium-ion batteries.

Zinc-substituted Fe-based Prussian blue analogues induce a weak Jahn-Teller effect to enhance stability of sodium ion batteries

Prussian blue analogues (PBAs) have attracted wide attention as cathode materials for sodium-ion batteries. Nevertheless, the poor cycle performance caused by the [Fe(CN)6]4− defects and Jahn-Teller (J-T) effect hinders its practical application. Here, Zn-substituted PBAs were synthesized through co-precipitation method and studied as cathodes for Na-ion batteries. The synthesized Na1.14Zn0.39Fe0.61[Fe(CN)₆]·4.14H2O (NZFC) and Na1.18Zn0.42Fe0.58[Fe(CN)₆]·4.96H2O (NZFE) showed outstanding exceptional electrochemical properties, including high capacity (first capacity of 114.56 and 97.76 mAh·g−1 at 10 mA·g−1, respectively), excellent rate property (71.81 and 68.69 mAh·g−1 at 500 mA·g−1, respectively), and cycling stability (64.72 % and 80.27 %, respectively) after 350 cycles at 200 mA g−1, which is attribute to introduction of Zn element induced a weak Jahn-Teller effect and a low-spins and a high-spins FeII/FeIII redox sites coordinated by C and N atoms prompt reversible diffusion of sodium ions and without structural transformation in the Na-ion storage. Using combined experiment and theory via ex situ X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations, it is confirmed that the weak J-T distortion contributes significantly to fast-overall kinetics, structural stability, and high electronic conductivity of the electrode. These findings provide new insights into comprehending for the future development of high-performance and stable sodium ion batteries.

On the structural evolution of pristine P2-type Na0.67Ni0.33Mn0.67O2 for symmetric full cell application

P2 type Na0.67Ni0.33Mn0.67O2 (NNMO) is a widely studied layered oxide cathode material for sodium-ion batteries (SIBs) because of its high capacity (160 mAhg-1 practically achieved) and broad voltage window (2–4.5 V). The redox activity in NNMO is shown by both Ni2+ and Mn4+ ions, making it a prospective symmetric SIB electrode material. The average working potential of the symmetric full cell is less due to the limited average working voltages of both the redoxes in a half cell between 2 V and 4.5 V, resulting in poor energy density. Herein, we report the feasibility of the NNMO symmetric full cell by widening the operational voltage window of NNMO. The electrochemical performance of NNMO half cells between 0.01 V and 4 V and the structural evolution during cycling are mapped by ex-situ XRD. Na0.44MnO2-like tunnel-type structure (Pbam) with high Na+ content (>0.90) exists at potentials close to the Mn3+/4+ redox reaction during cycling. The phase change was relatively reversible, implying that the NNMO anode works at such low voltages without the hazard of severe capacity losses. The symmetric full cell made using NNMO cycled between 0.01 V and 3 V and, at C/10 rate, delivered a capacity of ∼68 mAhg−1.

Ion Dynamics at the Intermediate Charging State of the Sodium Vanadium Fluorophosphate Cathode.

Na super ionic conductor (NASICON)-type polyanionic vanadium fluorophosphate Na3V2O2(PO4)2F (NVOPF) is a promising cathode material for high-energy sodium-ion batteries. The dynamic diffusion and exchange of sodium ions in the lattice of NVOPF are crucial for its electrochemical performance. However, standard characterizations are mostly focused on the as-synthesized material without cycling, which is different from the actual battery operation conditions. In this work, we investigated the hopping processes of sodium in NVOPF at the intermediate charging state with 23Na solid-state nuclear magnetic resonance (ssNMR) and density functional theory (DFT) calculations. Our experimental characterizations revealed six distinct sodium coordination sites in the intermediate structure and determined the exchange rates among these sites at variable temperatures. The theoretical calculations showed that these dynamic processes correspond to different ion transport pathways in the crystalline lattice. Our combined experimental and theoretical study uncovered the underlying mechanisms of the ion transport in cycled NVOPF and these understandings may help the optimization of cathode materials for sodium-ion batteries.

Unveiling the potential of Na2FePO4F@PEG composite as cathode material for sodium-ion batteries

The economic and environmental advantages of Na2FePO4F fluorophosphate have positioned it as a highly promising cathode material for sodium-ion batteries (SIBs). This recognition stems from its demonstrated potential to address key challenges in energy storage systems, making it a subject of extensive research and studies.In this paper, the preparation of Na2FePO4F powder through a simplified, upscaling, and cost-effective approach that involves the direct use of phosphoric acid is described, aiming to evaluate its electrochemical performance. The obtained orthorhombic structure (S.G. Pbcn) is mixed with varying percentages of polyethylene glycol as a carbon source (15% and 20%) to generate large specific surfaces, improve electronic conductivity, and achieve an optimized carbon content for these materials. The 15% and 20% PEG-coated Na2FePO4F are evaluated at a 2 - 4 V voltage range at C/15 in Na-half cells using two electrolyte formulations: 5% FEC 1 M NaClO4:PC and 1 M NaPF6:PC. The NaPF6/FEC electrolyte exhibits better electrochemical characteristics and high cycling stability, especially in the case of the 15% PEG-coated material. These findings are also supported by the data from differential plots and rate capabilities, highlighting the potential of the coated material for applications in high-performance energy storage applications.

Mechanism and enhanced performance of low-dose low-valence molybdenum-doped Na3V2(PO4)2F2O cathodes for sodium batteries

Sodium vanadium oxyfluorophosphate Na3V2(PO4)2F2O is an attractive cathode material for sodium ion batteries due to its high crystalline stability, high specific capacity and high discharge potential. Currently, the poor electronic conductivity and low diffusion rate of Na+ severely impede its development and application. In this work, low-dose Mo2+ doping is proposed through first-principle computation to enhance the structure and performance of Na3V2(PO4)2F2O. It is found that low-dose of Mo2+ doping can reduce the band gap and energy barrier for Na + diffusion in Na3V2(PO4)2F2O. However, heavy doping leads to serious Jahn-Teller distortion of the crystal structure. Therefore, low-dose Mo2+ doping, ranging from x = 0 to x = 0.06 in Na3V2-xMox(PO4)2F2O, is designed and experimentally carried out. The best performance with 118.5 mA h g−1 at 0.1C and 60.6 mA h g−1 at 20C is obtained in Na3V1.96Mo0.04(PO4)2F2O when x = 0.04 in comparison with other doping amounts. The specific discharge capacity at 0.5C decreases gradually from 105.4 to 77.9 mA h g−1 after 400 cycles, indicating a capacity retention of 73.9 %. These results demonstrate that low-dose Mo2+ doping is an effective strategy to enhance the electrochemical performance of Na3V2(PO4)2F2O, making it a promising cathode material for sodium batteries.

A novel bimetallic-polyanion Na4Fe2.82Ni0.18(PO4)2P2O7 cathode with superior rate performance and long cycle-life for sodium-ion batteries

Na4Fe3(PO4)2P2O7, with the advantages of strong structural stability, suitable voltage window, low cost and green pollution-free, is considered as a highly researchable cathode material for sodium-ion batteries. However, the low conductivity of Na4Fe3(PO4)2P2O7 and the inevitable electrochemical inertia from maricite-NaFePO4 impurity during the preparation process lead to the low reversible capacity and poor cycling stability. In this work, a new bimetallic-polyanion cathode material Na4Fe2.82Ni0.18(PO4)2P2O7 capped with an in-situ nitrogen-doped carbon layer is proposed. Ni-substituting inhibits the generation of electrochemical inert maricite-NaFePO4 impurity and enhances the Na+ ion conductivity. Meanwhile, a lower volume-change during the charging/discharging process can be achieved in Na4Fe2.82Ni0.18(PO4)2P2O7 electrode compared with conventional Na4Fe3(PO4)2P2O7 electrode. With the synergistic effect of in-situ N-doping and Ni-substituting, an ultra-high initial discharge capacity (128.4 mAh g−1 at 0.2C), superior rate performance (62.5 mAh g−1 at 50C) and significant long-term cycle life (capacity retention rate of about 83 % after 3000 cycles at 10C) can be achieved in the optimal Na4Fe2.82Ni0.18(PO4)2P2O7@C-N (Ni6-NFPP@C-N) cathode. This study suggests a practical strategy to produce Na4Fe3(PO4)2P2O7-based electrode material with no impurities and superior electrochemical properties for sodium-ion batteries.