Catalytic Support Research Articles

Graphene-based Nanomaterials As Catalysts for the Synthesis of Medicinally Privileged Heterocycles: Importance and Outlook

: Catalysis is an integral part of sustainable and green chemical processes. During the last two decades, the wonder 2D carbon material with honeycomb structure, graphene, and other functionalized graphenes have emerged as extremely versatile and robust nanomaterials in heterogeneous catalysis. The incredible catalytic efficacy of such carbon nanomaterials relies on their unique physicochemical properties, including large surface area, diverse catalytic active sites, multiple chemical functionalities, tunable electron density, synergistic effect, etc., making them noteworthy as metal-free catalysts and catalytic supports. : The article presents an overview of the catalytic applications of various graphene-based nanomaterials (GBNs), either metal-free or embedded with metal/metal oxide NPs, in synthesizing medicinally privileged heterocyclic compounds. It also summarizes the general methodologies for preparing graphene and various GBNs, their chemical structures, characterization techniques, and discussions on the potential active sites that are responsible for wider catalytic activity. Overall discussions unequivocally establish a promising paradigm for uncovering more innovative graphene-based materials and their subsequent applications in diverse fields, including heterogeneous catalysis.

A comprehensive investigation of the impact of carbon-supported metal complexes of triaminoguanidine on the characteristics of a double-base propellant

ABSTRACT In this study, triaminoguanidine complexes grafted onto activated carbon (AC-TAG-Fe and AC-TAG-Co) were designed and investigated for their catalytic effect on the thermolysis of a double base propellant consisting of nitrocellulose (NC) and diethylene glycol dinitrate (DEGDN). The successful synthesis of transition metal complexes with triaminoguanidine and their subsequent grafting onto activated carbon were confirmed using various analytical techniques, including Fourier Transform Infrared Spectroscopy, Raman Spectroscopy, X-ray Diffraction, and Scanning Electron Microscopy. Thermal characterization using Thermogravimetric Analysis and Differential Scanning Calorimetry provided valuable insights into the thermal properties and reactivity of the elaborated NC/DEGDN-based composites. Importantly, the addition of various additives resulted in notable improvements in both the enthalpy of reaction and density. Isoconversional kinetic studies revealed that the incorporation of TAG-Fe and TAG-Co complexes reduced the apparent activation energy of the NC/DEGDN composite from 137.4 kJ/mol to 135.4 kJ/mol and 114.8 kJ/mol, respectively, suggesting their catalytic effect. Furthermore, it is found that the addition of activated carbon (AC) resulted in an increase in activation energy to 154 kJ/mol, whereas grafting TAG-Fe and TAG-Co complexes onto AC as a catalytic support subsequently reduced activation energy to 119 kJ/mol and 112 kJ/mol, respectively. Overall, this research serves as a valuable reference for future studies focusing on investigating the catalytic combustion characteristics of double-base solid propellants.

Scalable Atomic‐Layer Tailoring of Abundant Oxide Supports Unlocks Superior Interfaces for Low‐Metal‐Loading Dehydrogenation

Liquid organic hydrogen carriers (LOHCs) offer a promising solution for global hydrogen infrastructure, but their practical application faces two key challenges: sluggish dehydrogenation processes and the reliance on catalysts with high noble metal loadings. This study presents a scalable approach to reduce noble metal usage while maintaining high catalytic activity. We synthesized an ultralow Pt content (0.1 wt%) catalyst using γ‐Al2O3‐based pellet support with atomic layer deposition (ALD) of TiO2. Advanced characterization techniques reveal that the thin ALD‐TiO2 shell provides a heterogeneous interface, confining electronically rich Pt‐nanoparticle ensembles. The catalyst outperforms both equivalent Pt‐content catalysts and a commercial 0.5 wt% Pt/γ‐Al2O3 catalyst in homocyclic LOHC dehydrogenation. This study provides insights into the beneficial role of ALD‐engineered interfaces for catalytic supports and offers an efficient approach for scalable production of low‐noble‐metal‐content catalysts, with implications for various catalytic processes.

Scalable Atomic-Layer Tailoring of Abundant Oxide Supports Unlocks Superior Interfaces for Low-Metal-Loading Dehydrogenation.

Liquid organic hydrogen carriers (LOHCs) offer a promising solution for global hydrogen infrastructure, but their practical application faces two key challenges: sluggish dehydrogenation processes and the reliance on catalysts with high noble metal loadings. This study presents a scalable approach to reduce noble metal usage while maintaining high catalytic activity. We synthesized an ultralow Pt content (0.1 wt%) catalyst using γ-Al2O3-based pellet support with atomic layer deposition (ALD) of TiO2. Advanced characterization techniques reveal that the thin ALD-TiO2 shell provides a heterogeneous interface, confining electronically rich Pt-nanoparticle ensembles. The catalyst outperforms both equivalent Pt-content catalysts and a commercial 0.5 wt% Pt/γ-Al2O3 catalyst in homocyclic LOHC dehydrogenation. This study provides insights into the beneficial role of ALD-engineered interfaces for catalytic supports and offers an efficient approach for scalable production of low-noble-metal-content catalysts, with implications for various catalytic processes.

Fractal Modelling of Heterogeneous Catalytic Materials and Processes.

This review considers the use of fractal concepts to improve the development, fabrication, and characterisation of catalytic materials and supports. First, the theory of fractals is discussed, as well as how it can be used to better describe often highly complex catalytic materials and enhance structural characterisation via a variety of different methods, including gas sorption, mercury porosimetry, NMR, and several imaging modalities. The review then surveys various synthesis and fabrication methods that can be used to create catalytic materials that are fractals or possess fractal character. It then goes on to consider how the fractal properties of catalysts affect their performance, especially their overall activity, selectivity for desired products, and resistance to deactivation. Finally, this review describes how the optimum fractal catalyst material for a given reaction system can be designed on a computer.

Efficient one-pot synthesis of ruthenium catalysts and their role in optimizing sugar alcohol production: investigating structural sensitivity

The study explores the feasibility of producing ruthenium catalysts supported on char through a one-pot synthesis, an original approach for the preparation of noble metal-based catalysts in this field. This method combines high-temperature stages, such as catalytic support carburization and catalyst activation, in a single step. The innovation represents a significant advancement in utilizing cellulose as a model of waste biomass, enhancing its value, and reducing catalyst production costs. The one-pot catalysts were successfully tested in the hydrogenation reaction of sugar mixtures (L-Arabinose and D-Galactose) under mild conditions, achieving full selectivities. The research also introduces for the first time in that reaction a structural sensitivity analysis of the reaction, comparing experimental results with a theoretical model. The findings reveal a direct correlation between catalytic activity and the {0001} exposed face of hcp ruthenium nanoclusters. This discovery opens new avenues for industrial-scale catalyst development, promising substantial reductions in energy and production costs, and emphasizing the economic appeal of the process.

Hexagonal boron nitride fibers as ideal catalytic support to experimentally measure the distinct activity of Pt nanoparticles in CO2 hydrogenation

Catalytic studies aim to design new catalysts to eliminate unwanted by-products and obtain 100 % selectivity for the preferred target product without losing activity. For this purpose, understanding the role of each component building up the catalyst is essential. However, determining the intrinsic catalytic activity of pure metals, especially precious metals in the CO2 hydrogenation reaction under ambient conditions is complex. This is because the catalyst supports used thus far always influence the catalytic process either directly or indirectly due to interface formation that modifies the electronic and morphological structure of the metals. Even SiO2, regarded as inert shows some activity owing to the hydroxyl groups on its surface. In this work, we propose chemically inert and defect-free hexagonal boron-nitride fibers (BNF) synthesized via a co-precipitation method with wide band gap and robust covalent bonds as an uncommon reference catalyst support to evaluate the catalytic activity of size-controlled Pt nanoparticles (4.7 ± 0.6 nm) in the hydrogenation of CO2. The fibers alone show no catalytic activity; however, Pt/BNF exhibited low but notable activity of 377 nmol/g at 400 °C and the catalyst can achieve nearly 100 % CO selectivity. X-ray photoelectron spectroscopy, transmission electron microscopy, and diffuse reflectance infrared Fourier transform spectroscopy measurements were used to indicate that hexagonal boron-nitride affects neither the metal nanoparticles nor the reaction itself; the measured catalytic activity stems from the activity of Pt deposites without the effect of the support, as they were alone. CO vibration spectroscopy studies suggest that due to the lack of substrate-metal interaction, Pt nanoparticles adopt an ideal spherical structure, resulting in several low coordination sites capable of CO2 conversion. Thus, BNF is proposed in the present article to be used as a reference catalyst support material. It can be efficiently used in investigations involving the proposed metal and reaction or under varying conditions with different metal nanoparticles and reaction systems.

Valorization of carbonaceous co-product obtained from iron ore-catalyzed methane cracking as support for Pd catalysts in toluene hydrogenation reaction

Iron ore has been proven as an abundant and sustainable catalyst in the production of hydrogen by catalytic cracking of methane. One of the main challenges is the identification of suitable market niches for the utilization of the resulting iron-carbon hybrid in order to make this process economically viable. This study examines the feasibility of using the iron-carbon hybrid obtained from methane cracking as support of Pd catalysts for the hydrogenation of toluene (350 ºC, 35 bar of H2 at room temperature and 90 min). Before supporting Pd, Fe-C hybrid was subjected to different acid functionalization treatments (nitric and/or phosphoric acids). The results indicate that sequential oxidation with nitric acid, followed by phosphoric acid, is the most effective strategy for achieving the highest catalytic activity (1294 mmolToluene gPd⁻¹) and conversion (27 %). Toluene conversion was 1.8 and 14.2 times higher than with the catalysts treated with nitric and phosphoric acid separately. Therefore, this work proves the possibility of employing carbon/Fe hybrid materials obtained in iron ore catalyzed methane cracking as catalytic supports in industrial relevant reactions.

Niobium Metal–Organic Framework Is an Efficient Catalytic Support for the Green Hydrogen Evolution Process from Metal Hydride

Herein, the development of a niobium-based metal–organic framework (Nb-MOF) designed to serve as a catalytic support for the production of hydrogen (H2) from sodium borohydride (NaBH4) is reported. The Nb-MOF was synthesized via a solvothermal method using niobium ammoniacal oxalate (AmOxaNb) as the metal source and 1,4-benzenedicarboxylic acid (BDC) as the ligand. The resulting MOF was characterized by Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS). The characterization study confirmed the successful synthesis of Nb-MOF. The catalytic activity was optimized by examining five key factors: (i) platinum (Pt) and cobalt (Co) bimetallic compositions (ranging from 1:0 to 0:1 mmol), (ii) NaBH4 concentration (0.2, 0.3, 0.4, and 0.5 mol L−1), (iii) the Nb-MOF/Pt–Co catalyst dose (0.05, 0.10, 0.20, and 0.40 mmol), (iv) sodium hydroxide (NaOH) concentration (0.01, 0.05, 0.1, and 0.2 mol L−1), and (v) system temperature (293.15, 298.15, 303.15, 313.15, and 323.15 K). The optimal catalyst was identified as Nb-MOF supporting a Pt-Co bimetallic composition in a 0.4:0.6 mmol ratio, achieving a hydrogen generation rate (HGR) of 1473 mL min−1 gcat−1 and an activation energy of 19.2 kJ mol−1. Furthermore, this catalyst maintained its efficiency over 20 cycles, demonstrating significant potential as a sustainable solution for H2 evolution from NaBH4.

Graphene-Based Catalysts: Emerging Applications and Potential Impact.

Carbon nanofillers in general and graphene in particular are considered as promising potential candidates in catalysis due to their two-dimensional (2D) nature, zero bandwidth, single atom thickness with a promising high surface area: volume ratio. Additionally, graphene oxide via result of tunable electrical properties has also been developed as a catalytic support for metal and metal oxide nanofillers. Moreover, the possession of higher chemical stability followed by ultrahigh thermal conductivity plays a prominent role in promoting higher reinforcement of catalytically active sites. In this review we have started with an overview of carbon nanofillers as catalyst support, their main characteristics and applications for their use in heterogeneous catalysis. The review article also critically focusses on the catalytic properties originating from both functional groups as well as doping. An in-depth literature on the various reaction catalysed by metal oxide based nanoparticles supported on GO/rGO has also been incorporated with a special focus on the overall catalytic efficiency with respect to graphene contribution. The future research prospective in the aforementioned field has also been discussed.

Pure copper extrusion additive manufacturing of lattice structures for enabling enhanced thermal efficiency in hydrogen production

The high geometrical complexity allowed by Additive Manufacturing (AM) of pure copper can support the development of more efficient catalytic supports that can enable the design of efficient reactors for key processes for energy transition, i.e., hydrogen production with methane steam reforming or CO2 conversion to synthetic methane, thanks to the enhanced thermal conductivity of the catalytic support. Low relative density lattice geometries with open cell copper geometries can be adopted as catalyst supports in the new generation chemical reactors to improve the heat transfer. This work presents a manufacturability study about pure copper lattice filters produced via metal Extrusion AM i.e., via feedstock 3D printing and sintering. The results show that feasible parts design can be reached and produced and that heat-exchange performances can be increased with respect to conventional supports, as confirmed by lab-scale heat transfer tests. A specific metrological assessment based on CTscan data is implemented on the printed parts to qualify them and to ensure a good thermal coupling between the printed filters and the heat exchanger main tube elements.

Biomass to biofuel: Palm kernel shells as catalyst supports for enhanced biodiesel production

AbstractThe use of agricultural biomass fibers, specifically palm kernel shell (PKS), has significant potential to enhance biodiesel production. This approach overcomes economic barriers and contributes to sustainability by repurposing agricultural biomass. This study explores the effectiveness of PKS as a cost‐effective and sustainable catalyst support. Palm kernel shell was chosen due to its high carbon content, low ash presence, and abundance as a byproduct in the palm oil industry, making it an economically viable and environmentally friendly option. In this study, an optimized activated carbon from PKS biomass was fabricated as catalyst support to enhance biodiesel production efficiency. Using response surface methodology (RSM), the PKS was impregnated with phosphoric acid and synthesized at various acid concentrations, impregnation times, and activation times to enhance porosity for catalytic support capabilities. The experimental design included a central composite design (CCD) to vary these factors systematically and determine their optimal levels. Scanning electron microscopy (SEM) and Brunauer–Emmett–Teller (BET) analysis revealed significant development of porosity, affirming the efficient activation process. Energy dispersive X‐ray (EDX) analysis confirmed phosphorus incorporation during activation, indicating the formation of an intricate pore structure. Fourier transform infrared (FTIR) spectroscopy highlighted the presence of functional groups pertinent to the biodiesel reaction process. The transesterification process employing PKS as a catalyst with different biobased feedstocks, such as waste frying oils from corn, palm, and sunflower, led to biodiesel yields of varying efficiencies. Notably, corn oil had the highest yield at 94.92%. This study highlights the potential of PKS as a biobased catalyst support and contributes to the broader biorefinery concept by integrating biomass utilization into renewable fuel production.

Effect of Acid Properties of Fluorinated Beta and ZSM-5 Zeolites Used as Supports of Ni Catalysts for the Catalytic Hydrodeoxygenation of Guaiacol

Commercial NH4-Beta and Na-ZSM-5 zeolites were fluorinated with different amounts of NH4F and using different procedures (room temperature, conventional refluxing, microwave refluxing). Samples were characterized by XRD, N2 physisorption, FTIR, 1H NMR, SEM-EDS, and TGA of adsorbed cyclohexylamine. An increase in the concentration of NH4F led to fluorinated zeolites with higher surface areas and slightly lower amounts of Brønsted acid sites due to some dealumination. Fluorination by conventional or microwave refluxing at shorter times did not dealuminate ZSM-5, resulting in the formation of higher particle sizes. Ni/fluorinated beta catalysts were more active than Ni/fluorinated ZSM-5 catalysts for the hydrodeoxygenation of guaiacol at 180 °C and 15 bar of H2 for 1 h due to their higher amount of acid sites. The appropriate proportion of metallic and Brønsted acid centers allowed for the selective obtention of cyclohexane (58%) for the Ni supported on beta fluorinated with NH4F 0.1 M catalyst. The combination of this fluorinated beta to a Ni/ordered mesoporous carbon catalyst significantly boosted its selectivity to cyclohexane from 0 to 65%. Fluorinated ZSM-5 samples, although having stronger Brønsted acid sites, as observed by 1H NMR, they had lower amounts, leading to higher selectivity to cyclohexanol when used as catalytic supports.

CO2 methanation on Ni/Y2O3 Catalysts: The effects of preparation procedure and cerium oxide promotion

Present paper reports on the CO2 methanation (CME) performance of novel Ni catalysts supported on yttria, ceria, and ceria-doped yttria carriers. Catalysts were synthesized using incipient wetness impregnation and precursor nitrate co-decomposition. These systems outperformed on a mass-specific basis an industrial Ni/alumina benchmark catalyst. In addition, this work examines in details the impact of both the preparation procedure and the Ni-content on the CME activity both in terms of the reaction rate and the apparent activation energy. Our research demonstrates that Y2O3 is an effective catalytic support promoting stability and activity of the catalysts. CeO2–doping further improves activity, remarkably with little to no penalty to the thermal stability of the catalysts. Comparison of the performance of a conventional IWI-synthesized Ni-catalyst with a counterpart obtained via a co-decomposition route, demonstrated an advantage of the latter. Our findings suggest Ni-CeO2/Y2O3 prepared via co-decomposition may be advised as the active and stable catalysts for CME applications.

Eco-friendly Strategy for Producing Bio-based Silver Nanoparticles (AgNPs) Employing Sepioteuthis lessoniana ink, in Addition to Biological and Degradation of Dye Applications.

The squid, Sepioteuthis lessoniana, is a remarkable fishery product which is exported by many nations for use in industrial production or human consumption. This study focused on the synthesis of silver nanoparticles (AgNPs) from squid ink (SI) and its wide range of applications. The formation of the nanoparticles was confirmed through UV-Visible spectroscopy, FTIR, XRD, SEM with EDX, DLS, and zeta potential analysis. The results showed a strong absorbance peak at 407nm, the presence of various functional groups, a nanocrystalline structure with a crystalline size of 17.56nm, spherical-shaped particles with an average size of 76nm, and the presence of the highest % mass of Ag and uniformly dispersed particles, respectively. The bioactivity of the synthesized squid ink silver nanoparticles was analyzed through antibacterial, antioxidant, anticancer, and toxicity studies. The dye degradation assay was also analyzed as a means of wastewater treatment for different industrial dyes. The antibacterial activity showed the highest zone of inhibition of 24mm at a concentration of 100μg/ml against Escherichia coli, followed by other tested strains. The nitric oxide radical scavenging assay showed the highest antioxidant activity (92%) at a concentration of 100μg/ml. The cytotoxic ability of SI-AgNPs against the MDA-MB-231 breast cancer cell line revealed an IC50 value of 4.52μg/ml. The toxicity study revealed a dose and time-dependent activity with the LC50 value of 5.090 and 3.303mg/ml for 24 and 48h, respectively. The successful degradation of dyes by SI-AgNPs is attributed to the cooperative action of the electron relay system with Ag as a catalyst and SI as a catalytic support. These findings indicate that SI-AgNPs are a novel potential product that should be further studied to improve its pharmacological, biomedical, and environmental applications.

Nanostructured Carbon Materials Derived from Biomass Waste for Electrocatalytic Hydrogen Production

Nanostructured carbons derived from biomass can be thought of as adaptable materials due to their several fascinating features, such as internal pores and a huge surface area. These qualities make them ideal for use as electrocatalysts in hydrogen evolution reaction (HER), a key process of clean energy close loop of water electrolyzers and fuel cells, or as catalytic supports. In addition, the physicochemical properties of biomass-derived carbon-based materials, such as easy tailorability, chemical inertness, hydrophobicity, and low cost, make them much more desirable than other catalytic materials for the HER process. Furthermore, nanostructured carbon materials derived from biomass are suitable for a variety of processes, including electrocatalytic reactions, organic conversions, and photocatalytic reactions. The aim of this review article is to provide a comprehensive examination of the many methods used to prepare biomass-derived carbon-based materials and their specific uses in heterogeneous catalysis. Moreover, relevant studies carried out in recent years involving materials derived from biomass as electrocatalysts for HER are discussed. Finally, we also explore the challenges and future possibilities of biomass-derived carbon materials, as well as their potential for the HER process.

Imine–linked covalent organic framework synthesis

Imine-linked covalent organic frameworks (COFs) are highly ordered polymer networks that are more chemically stable compared to their boron-linked counterparts making them more attractive for a variety of applications, including as energy storage devices, proton-conductive membranes, and catalytic supports. Furthermore, these imines linked COFs may be synthesized using a diverse spectrum of monomers, providing tremendous design freedom and versatility. We report a general method for synthesizing Imine linked COFs based on the Schiff-base condensation reaction of anilines. The synthesis of 4,4′,4′′-(benzene-1,3,5-triyltris(ethyne-2,1-diyl) trianiline, 4,4′-dicarbaldehyde, 4,4′-(ethyne-1,2-diyl) dibenzaldehyde (BPDA), and terephthalaldehyde (PDA) monomers produced by multistep coupling processes.

3D-printed triply periodic minimal surface (TPMS) structures as catalyst carriers

The flow and forced convection heat transfer properties of triply periodic minimal surface (TPMS) lattices were investigated both experimentally and numerically. The TPMS structures consist of periodically arranged Gyroid (G) unit cells of 81 % porosity and different unit cell sizes (2–4 mm). This is the first study to evaluate the effect of cell diameter on pressure drop and heat transfer characteristics of solid-gyroid structures prepared by selective laser melting (SLM) technique. Moreover, the range of pore-based Reynolds number covered the laminar and turbulent regimes (Rep=11–1700). The results shown that larger cell diameter provides higher heat transfer coefficients and unit pressure drop. An increase of cell diameter from 2 mm to 4 mm can enhance heat transfer coefficient and unit pressure drop of 39 % and 85 %, respectively. New correlations for flow resistance and heat transfer of solid-gyroid structures were developed. It was confirmed that TPMS lattices can be an alternative to conventional catalytic supports, because they provide comparable thermal efficiency index as foam and packed bed.

On the Selection of Catalysts’ Support with High Oxygen Delivery Capacity for DRM Application: Interest of Praseodymium as Dopant of Ceria

AbstractIn the present work, a series of supports with varying compositions (ranging from pure CeO2 to pure PrO2-y) was designed to investigate their ability to release oxygen (with the concomitant formation of oxygen vacancies) under diverse reducing atmospheres: hydrogen (H2), helium (He), and in the presence of a carbonaceous substance that mimics eventual carbon deposits formed under practical reaction conditions (DRM). Oxygen vacancies were generated effectively in all three atmospheres (following the order He < H2 < carbon material). With regard to the influence of the composition, the capability to generate oxygen vacancies clearly increased with the Pr content, for whatever the conditions tested. Notably, the non-stoichiometry obtained with the support of pure praseodymia in both inert and reducing atmospheres is very remarkable, as it approaches the maximum non-stoichiometry value of the well-established theoretical Bevan cluster. This leads to consider this formulation as a very promising support for applications in catalysis and other fields where oxygen vacancies play a crucial role. Dry Reforming of Methane requires catalytic supports that possess highly mobile oxygen, enabling it to actively participate in the reactions step involved or potentially gasify undesirable carbon deposits generated during parallel reactions. Consequently, designing and elucidating the behavior of ceria-praseodymium-based supports with high reducibility and generation of oxygen vacancies (oxygen storage and release capacity) holds particular relevance in this context. Actually, the very preliminary results comparing two counterpart formulations (5%Ni/PrO2-y versus 5%Ni/Al2O3) already confirm the suitability of the choice of pure praseodymia in terms of activity, stability and very high selectivity towards H2 and CO, reaching a very close value to the ideal H2/CO ratio of 1.

Enhanced oxidoreductase activity of diatom frustule supported Fe3O4 for sensitive colorimetric detection of Cr(VI)

Given Cr(VI) is a ubiquitous water pollutant posing significant public health risks, there is a need for an inexpensive and easy-to-use detection tool. Herein, a diatom frustule-supported Fe3O4 (DF-Fe3O4) with enhanced oxidoreductase mimetic activity is reported for direct colorimetric detection of Cr(VI). Unlike the peroxidase nanozymes which are often reported for colorimetric detection, DF-Fe3O4 triggered a chromogenic redox reaction between TMB and Cr(VI) without requiring H2O2. This enables direct redox reactions while circumventing potential interferences associated with the use of H2O2. DF-Fe3O4 was synthesized with a coprecipitation method and subsequently characterized by SEM, XRD, and XPS techniques, revealing the distribution of Fe3O4 NPs on the frustule matrix. The frustule obtained from Nitzschia sp. of a sediment sample rendered a robust catalytic support enhancing the oxidoreductase activity of pristine Fe3O4 NPs by 20.8 %. Further, the nanozyme maintains 73 % of its activity even at 95 °C while losing only 33 % of its activity after one month of storage. The oxidoreductase mimetic activity was evaluated using the chromogenic redox reaction between TMB and Cr(VI) which rapidly forms a blue color (λmax= 654 nm), where its intensity forms the basis of the colorimetric detection. With a Km value of 0.058 mM, the nanozyme was able to selectively detect Cr(VI) down to 0.21 µM with a linear range between 0.1–500 µM. Recoveries from spiked wastewater samples were between 91.14–102.20 %. The obtained analytical figures of merits demonstrated the applicability of the developed sensor for Cr (VI) analysis devoid of complex instrumentation in the established analytical methods.