Catalytic Site Research Articles

A Novel Cold-Adapted Nitronate Monooxygenase from Psychrobacter sp. ANT206: Identification, Characterization and Degradation of 2-Nitropropane at Low Temperature

Aliphatic nitro compounds cause environmental pollution by being discharged into water with industrial waste. Biodegradation needs to be further explored as a green and pollution-free method of environmental remediation. In this study, we successfully cloned a novel nitronate monooxygenase gene (psnmo) from the genomic DNA library of Psychrobacter sp. ANT206 and investigated its ability to degrade 2-nitropropane (2-NP). Homology modeling demonstrated that PsNMO had a typical I nitronate monooxygenase catalytic site and cold-adapted structural features, such as few hydrogen bonds. The specific activity of purified recombinant PsNMO (rPsNMO) was 97.34 U/mg, rPsNMO exhibited thermal instability and reached maximum catalytic activity at 30 °C. Moreover, rPsNMO was most active in 1.5 M NaCl and remained at 104% of its full activity in 4.0 M NaCl, demonstrating its significant salt tolerance. Based on this finding, a novel bacterial cold-adapted enzyme was obtained in this work. Furthermore, rPsNMO protected E. coli BL21 (DE3)/pET28a(+) from the toxic effects of 2-NP at 30 °C because the 2-NP degradation rate reached 96.1% at 3 h and the final product was acetone. These results provide a reliable theoretical basis for the low-temperature degradation of 2-NP by NMO.

Discovery of ZG-2305, an Orally Bioavailable Factor Inhibiting HIF Inhibitor for the Treatment of Obesity and Fatty Liver Disease.

Genetic loss of the 2-oxoglutarate oxygenase factor inhibiting hypoxia-inducible factor (FIH) enhances both glycolysis and aerobic metabolism. FIH is thus a potential target for adiposity control and improving hepatic steatosis. We describe development of a series of novel, potent, and selective FIH inhibitors that occupy both the FIH catalytic site and a recently defined tyrosine conformational-flip pocket. ZG-2305, with a Ki of 79.6 nM for FIH, manifests 38-fold selectivity over the hypoxia-inducible factor (HIF) prolyl hydroxylase PHD2. Oral administration of ZG-2305 in the western-diet induced obesity mouse model results in improved lipid accumulation and recovery from abnormal body weight/hepatic steatosis. Amelioration of nonalcoholic steatohepatitis (NASH) related pathological phenotypes in the HF-CDAA-diet induced NASH mouse model was observed. Preliminary preclinical studies indicate ZG-2305 has good pharmacokinetic properties and an acceptable safety profile. The results imply ZG-2305 is a promising candidate for treatment of obesity and fatty liver disease.

Role of Tyrosine Phosphorylation in PTP-PEST.

We study the influence of tyrosine phosphorylation on PTP-PEST, a cytosolic protein tyrosine phosphatase. Utilizing a combination of experimental data and computational modeling, specific tyrosine sites, notably, Y64 and Y88, are identified for potential phosphorylation. Phosphorylation at these sites affects loop dynamics near the catalytic site, altering interactions among key residues and modifying the size of the binding pocket. This, in turn, impacts substrate binding, as indicated by changes in the binding energy. Our findings provide insights into the structural and functional consequences of tyrosine phosphorylation on PTP-PEST, enhancing our understanding of its effects on substrate binding and catalytic conformation.

Morphology Regulation and Oxygen Vacancy Construction Synergistically Boosting the Piezocatalytic Degradation and Pure Water Splitting of SrTiO3.

In recent years, the development of high-efficiency piezoelectric materials is an effective means to make full use of the mechanical energy widely existing in the environment. However, there are few reports on multi-strategies synergistically improving piezocatalytic activity, and the mechanism of synergistic enhancement of piezocatalytic activity also receives less attention. Herein, the SrTiO3 nanorods decorated with tunable surface oxygen vacancy concentrations are prepared. Oxygen vacancy-optimized SrTiO3 nanorods exhibit efficient and undifferentiated piezocatalytic degradation activities for both anionic and cationic dyes under ultrasonic vibration. More importantly, it can split water into H2 and H2O2 with high production rates of 540 and 332 µmol g-1 h-1 without adding any sacrificial agents and cocatalysts, respectively. Mechanism analyses demonstrate that the 1D structure is beneficial to mechanical energy harvesting, and the surface oxygen vacancy induces larger surface asymmetry and piezoelectric response, synergically enhancing the piezocatalytic activity of SrTiO3 nanorods. In addition, metal deposition experiments under different conditions show that SrTiO3 nanorods possess abundant reactive catalytic sites in the piezocatalytic reaction process. This work provides a further understanding of piezocatalysis in piezoelectric nanomaterials and is important for the development of efficient piezoelectric catalysts.

Vitis vinifera Lipoxygenase LoxA is an Allosteric Dimer Activated by Lipidic Surfaces

Lipoxygenases catalyze the peroxidation of poly-unsaturated fatty acid chains either free or esterified in membrane lipids. Vitis vinifera LoxA is transcriptionally induced at ripening onset and localizes at the inner chloroplastic membrane where it is responsible for galactolipid regiospecific mono- and di-peroxidation. Here we present a kinetic and structural characterization of LoxA. Our X-ray structures reveal a constitutive dimer with detergent induced conformational changes affecting substrate binding and catalysis. In a closed conformation, a LID domain prevents substrate access to the catalytic site by steric hindrance. Detergent addition above the CMC destabilizes the LID and opens the dimer with both catalytic sites accessible from the same surface framed by the PLAT domains. As a consequence, detergent molecules occupy allosteric sites in the PLAT/catalytic domain interfaces. These structural changes are mirrored by increased enzymatic activity and positive cooperativity when the substrate is provided in micelles. The ability to interact with micelles is lost upon dimer destabilization by site-directed mutagenesis as assessed by tryptophan fluorescence. Our data allow to propose a model for protein activation at the membrane, classifying LoxA as an interfacial enzyme acting on fatty acid chains directly from the membrane similar to mammalian 15-LOX and 5-LOX.

Multi‐Enzyme Mimetic MoCu Dual‐Atom Nanozyme Triggering Oxidative Stress Cascade Amplification for High‐Efficiency Synergistic Cancer Therapy

AbstractSingle‐atom nanozymes (SAzymes) with ultrahigh atom utilization efficiency have been extensively applied in reactive oxygen species (ROS)‐mediated cancer therapy. However, the high energy barriers of reaction intermediates on single‐atom sites and the overexpressed antioxidants in the tumor microenvironment restrict the amplification of tumor oxidative stress, resulting in unsatisfactory therapeutic efficacy. Herein, we report a multi‐enzyme mimetic MoCu dual‐atom nanozyme (MoCu DAzyme) with various catalytic active sites, which exhibits peroxidase, oxidase, glutathione (GSH) oxidase, and nicotinamide adenine dinucleotide phosphate (NADPH) oxidase mimicking activities. Compared with Mo SAzyme, the introduction of Cu atoms, formation of dual‐atom sites, and synergetic catalytic effects among various active sites enhance substrate adsorption and reduce the energy barrier, thereby endowing MoCu DAzyme with stronger catalytic activities. Benefiting from the above enzyme‐like activities, MoCu DAzyme can not only generate multiple ROS, but also deplete GSH and block its regeneration to trigger the cascade amplification of oxidative stress. Additionally, the strong optical absorption in the near‐infrared II bio‐window endows MoCu DAzyme with remarkable photothermal conversion performance. Consequently, MoCu DAzyme achieves high‐efficiency synergistic cancer treatment incorporating collaborative catalytic therapy and photothermal therapy. This work will advance the therapeutic applications of DAzymes and provide valuable insights for nanocatalytic cancer therapy.

Bimetal anchoring porous MXene nanosheets for driving tandem catalytic high‐efficiency electrochemical nitrate reduction

AbstractElectrochemical nitrate reduction reaction (NO3RR) is considered a promising strategy for ammonia synthesis and nitrate removal, in which catalyst development is crucial. Herein, a series of bimetal (Co and Cu) anchoring porous MXene nanosheets (CoxCuy@PM) catalysts were prepared by combining etching and reduction strategy. On the one hand, Cu and Co bimetals provided tandem catalytic active sites for NO3RR. On the other hand, the in‐plane PM exhibited good electrical conductivity and multiple transport pathways. Consequently, the optimized Co7Cu3@PM catalyst achieved a high ammonia yield of 7.43 mg h−1 mg cat.−1 and an excellent Faraday efficiency (FE) of 95.9%. The mechanism of NO3RR was investigated by analyzing electrolysis products and in situ Fourier transform infrared spectroscopy. Furthermore, the Co7Cu3@PM based ZnNO3− battery exhibited the superior power density of 5.59 mW cm−2 and an NH3 FE of 92.3%. This work presents an effective strategy to design MXene‐based high‐performance NO3RR electrocatalysts.

Probing the performance of DFT in the structural characterization of [FeFe] hydrogenase models.

In this work, a series of DFT and DFT-D methods is combined with double-ζ basis sets to benchmark their performance in predicting the structures of five newly synthesized hexacarbonyl diiron complexes with a bridging ligand featuring a μ-S2C3 motif in a ring-containing unit functionalized with aromatic groups. Such complexes have been considered as [FeFe] hydrogenase catalytic site models with potential for eco-friendly energetic applications. According to this assessment, r2SCAN is identified as the density functional recommended for the reliable description of the molecular and crystal structures of the herein studied models. However, the butterfly (μ-S)2Fe2 core of the models demonstrates a minor deformation of its optimized geometry obtained from both molecular and periodic calculations. The FeFe bond length is slightly underestimated while the FeS bonds tend to be too long. Adding the D3(BJ) correction to r2SCAN does not lead to any improvement in the calculated structures.

CuFe Cooperativity at the Membrane-Electrode Interface Elicits a Tandem 2e-+2e- Mechanism for Exclusive O2-To-H2O Electroreduction.

High O2 reduction reaction (ORR) kinetics and exclusive 4e- pathway selectivity are keys to realizing a sustainable society. However, nonprecious electrocatalysts at present cannot enhance the ORR turnover frequency and H2O Faradaic efficiency (FE) concurrently. To address these two challenges, hybrid bilayer membrane (HBM) electrodes with earth-abundant metal centers are developed to control proton-coupled electron transfer (PCET) in ORR. Here, an oxidase-inspired CuFe active site is supported on a tris(2-pyridylmethyl)amine HBM and explored as a unique interface for efficient ORR. This bimetallic HBM displayed an ORR activity 1.4 times higher than the monometallic systems and exhibited the highest FE for H2O (∼94%) among Cu-, Fe-, Ni-, and Co-based HBMs. Contrary to previous studies where the ORR current decreases upon embedding the metal center in a hydrophobic lipid environment, here, the incorporation of a nitrile-terminated proton carrier at the HBM interface boosts the ORR current by 1.7 folds relative to the case where the catalytic site is directly exposed to protons in solution. This intriguing dual improvement is supported by density function theory calculations where an additional 2e-+2e- mechanism occurs in parallel to the direct 4e- pathway, highlighting the synergistic effect of the CuFe HBM for facilitating high-performance ORR. A Zn-air battery is constructed using this CuFe HBM for the first time, further demonstrating that the knowledge gained from this HBM technology holds practical values in real-life applications. These findings on interfacial PCET are envisioned to spark new design principles for future catalysts with optimal electrochemical properties for advanced energy conversion schemes.

Triggering Asymmetric Layer Displacement Polarization and Redox Dual-Sites Activation by Inside-Out Anion Substitution for Efficient CO2 Photoreduction.

Sluggish bulk charge transfer and barren catalytic sites severely hinder the CO2 photoreduction process. Seeking strategies for accelerating charge dynamics and activating reduction and oxidation sites synchronously presents a huge challenge. Herein, an inside-out chlorine (Cl) ions substitution strategy on the layered polar Bi4O5Br2 is proposed for achieving layer structure-dependent polarization effect and redox dual-sites activation. Cl ions in the bulk phase shrink the halogen layer interspace by 8‰, triggering asymmetric [Bi4O5]2+ layer displacement polarization, prolonging the average photocharge lifetime to 201.8ps. Meanwhile, surface substituted Cl ions enhance the electron-donating capability of neighboring Bi atoms, activating the intrinsic Bi reduction sites, and increasing H2O molecule adsorption on nearby intrinsic O oxidation site (cal. by 0.105eV), also self-donating as an alien oxidation site. Besides, Cl upshifts the p-band center closer to the Fermi level, facilitating the reactant adsorption. Therefore, the energy barrier for CO2 activation and rate-limiting *COOH intermediate formation steps are significantly decreased. Without cocatalysts and sacrificial reagents, inside-out Cl-substituted Bi4O5Br2 delivers a remarkable CO2-to-CO photoreduction rate of 50.18µmol g-1 h-1, being one of the state-of-the-art catalysts. This finding offers insights into exploiting polarization at the molecular-level and enhances understanding of catalytic site activation.

Metal-decorated opal-like silica catalysts: High-temperature reconstructions in cobalt-ceria active layer during simultaneous oxidation of CO and hydrocarbons

Opal-like silica, which represents a new class of SiO2-based nanomaterials, was used as a support for the deposition of cobalt and cerium oxides as active components. A series of samples was prepared and tested in the oxidation of CO and hydrocarbons in a prompt thermal aging regime. As revealed by a set of physicochemical methods, the initial catalytic performance of the samples is high (T50 = 214 °С) due to the emergence of new catalytic sites, which appeared as a result of interaction between Co and Ce oxides located between silica nanospheres in a close proximity to each other. At 800 °C, these particles undergo agglomeration, which is expressed in a slight deactivation of the catalysts (T50 ≥ 260 °С). The bulk silicate phase is formed at 900 °C, thus leading to further deactivation. Recovering of the catalytic activity (T50 = 252 °С) takes place at 1000 °С.

In Situ Oxidative Ring-Opening of Calix[8]arene to Construct Stable Bismuth-Oxo Clusters with Exposed Catalytic Sites for Specific Electroreduction of CO2 to HCOOH.

Nanocluster catalysts typically face challenges in balancing stability with catalytic efficiency. This study introduces a unique bismuth-oxo cluster, solely protected by two ring-opened calixarenes, which demonstrates not only enhanced structural stability but also superior catalytic performance in the sustained conversion of CO2 to HCOOH via electrocatalysis. For the first time, we reveal that under specific solvothermal conditions, tert-butylcalix[8]arene (TBC[8]) can undergo in situ oxidative cleavage of its C-C bond, leading to ring-opened polyphenolic molecules. These molecules serve as protective ligands for the bismuth-oxo cluster, bestowing exceptional structural stability and offering a more flexible and diverse configuration compared to intact TBC[8]. This adaptability promotes the exposure of active bismuth sites on the cluster surface, enhancing catalytic efficiency. Notably, the Bi10 cluster, featuring a monobismuth active site, achieves an exceptional formate production efficiency of 98.79% at -1.25 V vs RHE while maintaining superb durability over 8 h. The stability and catalytic processes of Bi10 surpass those of the Bi13 cluster, which is structurally reinforced by two intact TBC[8] molecules and stabilized by four benzoic ligands. Through in situ infrared spectroscopy and density functional theory calculations, we demonstrate that the monobismuth active site in Bi10 more effectively stabilizes the *OCHO intermediate, thereby promoting the electrocatalytic reduction of CO2 to HCOOH compared to Bi13. This comparative performance underscores the potential of ring-opened calixarene ligands in enhancing the functionality of nanocluster catalysts.

Synthesis, C-N/N-N bond conformational analysis and evaluation of naphtho[2,3-d][1,2,3]triazole-4,9-dione tethered N-acyl hydrazones as α-amylase inhibitors: Insights from molecular modeling and ADMET analysis

In an effort to expand the repertoire of potent α-amylase inhibitors, we sought to develop novel inhibitors by combining 1,4-naphthoquinone, 1,2,3-triazole, and N-acyl hydrazone scaffolds in a single matrix. To achieve this, twelve novel naphtho[2,3-d][1,2,3]triazole-4,9‑dione tethered N-acyl hydrazones were synthesized through condensation reaction of 2-(4,9-dioxo-4,9-dihydro-1H-naphtho[2,3-d][1,2,3]triazol-1-yl)acetohydrazide with various substituted aryl aldehydes. Structural elucidation for all the compounds was performed using 1D, 2D-NMR, FTIR, and mass spectral analyses. The synthesized molecules were evaluated for their ability to inhibit α-amylase activity using acarbose as the standard drug. All the derivatives exhibited potent inhibition of α-amylase, with IC50 values ranging between 17.26 ± 0.07 to 25.62 ± 0.03 μg/mL. Notably, compound 9c possessing –meta substituted –NO2 group displayed the highest activity (IC50 = 17.26 ± 0.07 μg/mL) among the series. Structure-activity relationship (SAR) revealed the pivotal role of aryl ring substitutions in determining inhibitory efficacy. To validate these findings and to assess the binding stability of 9c within the catalytic site α-amylase dervied for A. oryzae (PDB ID:7TAA), in silico studies were performed. The compound 9c effectively occupies the enzyme's active pocket, with minimal RMSD fluctuations observed over 100 ns simulation, indicating stable protein-ligand complex. ADMET predictions suggested favorable drug-like properties, underscoring the potential of these compounds as novel α-amylase inhibitors for managing type 2 diabetes mellitus

Atomic Level Understanding of the Structural Stability and Catalytic Activity of Nanoporous Gold/Titania Cluster Inverse Catalysts at Ambient and High Temperatures.

Nanoporous gold (NPG) exhibits exceptional catalytic performance at low temperatures, but its activity declines at elevated temperatures due to structural coarsening. Loading metal oxide nanoparticles onto NPG can enhance its catalytic activity at high temperatures. In this work, we used NPG-supported titania nanoparticles as a model system (denoted as Ti2O4/NPG) to study their catalytic activity at ambient and high temperatures with CO oxidation as a probe reaction by density functional theory (DFT) calculation and ab initio molecular dynamics (AIMD) simulations. The possible factors that may affect the CO oxidation reaction pathways and energy profiles on the Ti2O4/NPG, such as oxygen vacancies; silver impurities; Mars-van Krevelen (MvK), Eley-Rideal (ER), or trimolecular Eley-Rideal (TER) mechanisms; and catalytic active sites, were comprehensively investigated. The results showed that reaction energy barriers on Ti2O4/NPG were not significantly decreased compared to the pristine NPG, indicating that their catalytic activities at ambient temperature were comparable. At the evaluated temperature (400 °C), the Ti2O4/NPG exhibited superior thermal stability and maintained its active sites, while the NPG reduced active sites due to surface coarsening. The strong oxide-metal interaction (SOMI) effect between the NPG and Ti2O4 nanoparticles is found to be a main factor for the high structural stability and catalytic activity at high temperatures.

3'-Dehydroxypurpurogallin-4-carboxamides as Influenza A Endonuclease Inhibitors: Synthesis, SARAnalysis, and Structural Characterization of Protein Complex.

The influenza RNA-dependent RNA polymerase harbours an endonuclease subunit characterized by a catalytic site housing two divalent metal ions. By effectively chelating both Mg2+ and Mn2+ ions, a low-molecular-weight inhibitor with a metal-binding pharmacophore can halt endonuclease activity. Herein, two 3'-dehydroxypurpurogallin-4-carboxamide series, namely twelve C-4' unsubstituted and twelve C-4' phenyl substituted congeners were designed and prepared to be tested as inhibitors of the metal-dependent viral enzyme. These inhibitors were accessed through the chemoenzymatic reaction of gallic acid with either pyrocatechol or phenylpyrocatechol moderated by laccase, followed by amidation. Experimental IC50 values were determined using AlphaScreen technology, with the most potent inhibitors exhibiting IC50 values around 0.35 μM. Using X-ray crystallography, we analyzed structure of the endonuclease in complex with one potent 3'-dehydroxypurpurogallin-carboxamide at 2.0 Å resolution, revealing the coordination of the compound's triad of oxygen atoms with the two metal ions in the influenza A endonuclease active site.

Catalytic benzylation of arenes using metal-ion modified HY zeolites for sustainable synthesis

Microporous zeolites are commonly employed as catalysts for the benzylation of arenes and benzyl alcohol. However, their catalytic efficiency is often compromised by diffusion limitations, particularly in reactions involving larger arenes. In this study, we developed metal-ion modified HY zeolites using Zn, Mg, and Ni as dopants and investigated their catalytic performance in the benzylation of a range of arenes, including toluene, benzene, mesitylene, p-xylene and with benzyl alcohol (BzOH). The structural and acidic properties of the modified HY zeolites were characterized using a combination of techniques including scanning electron microscopy (SEM), X-ray diffraction (XRD), N₂ adsorption–desorption isotherms, Fourier-transform infrared (FTIR) spectroscopy, ammonia temperature-programmed desorption (NH₃-TPD), and proton magic angle spinning nuclear magnetic resonance (1H MAS NMR) spectroscopy. The presence of catalytically active Brønsted acid sites (BAS) was detected by 1H MAS NMR spectroscopy and it was demonstrated that the HY zeolite's acidity is considerably modulated by the addition of metal ions. The catalytic evaluations indicated that the metal-ion modified HY zeolites exhibited superior activity compared to unmodified HY zeolite, with the catalytic performance following the order Zn/HY > Ni/HY > Mg/HY > HY for the benzylation of benzyl alcohol with mesitylene. Further investigation into the mechanism revealed that the synergistic effect of metal ions and acidity plays a crucial role in enhancing the accessibility of arenes to the surface catalytic sites and thereby improving catalytic performance. These findings underscore the importance of the metal-acidity synergy in optimizing the catalytic efficacy of modified HY zeolites for selective benzylation reactions.

Synergistic Coordination Effect and Metal-Support Interaction Engineering of Single-Atom Mn-N2 Sites for Boosting Sensitive and Selective Dopamine Biosensing in Human Serum.

Coordination environment of metal atoms is core for designing high-performance single-atom catalysts (SACs), while metal-support interaction also has an important effect on structure-function relationship. Nevertheless, the interaction effect of metal-support is mostly ignored. Through synergistic regulation of coordination environment and metal-support interaction, Mn SAC with atom-dispersed Mn-N2 sites on dopamine (DA) support is synthesized for sensitive and selective DA oxidation based on theoretical calculations and experimental explorations. MnN2 presents the more optimal catalytic site for DA oxidation than other coordination conditions, enhancing sensitivity including a wide range, a low limit of detection, and particularly a very low catalytic potential. The construction of Mn-N2 active sites on DA carbon promotes the coupling between Mn metal atoms and DA support, decreasing work function, facilitating electron exchange, shortening response time, and boosting selectivity. Both the catalytic mechanism of Mn SAC toward DA and the relation construction of catalyst's structure and catalytic function are established.

Superior Singlet Oxygen Electrosynthesis via Neighboring Dual Molecular Oxygen Coactivation for Selective Tetracycline Detoxification

AbstractOxygen (O2) electroreduction offers a green approach for singlet oxygen (1O2) synthesis in wastewater contaminants detoxification. However, traditional single O2 activation on single‐metal catalytic sites seriously suffers from the kinetically‐unfavorable desorption of adsorbed superoxide species (•O2−*/•OOH*). Here, we demonstrate a novel dual O2 coactivation pathway on shortened Fe1−OV−Ti sites for superior 1O2 electrosynthesis through a rapid disproportionate process between surface‐confined •O2−*/•OOH*. Theoretical calculations combined with in situ electrochemical spectroscopies demonstrated that the shortened distance between Fe single atom and adjacent unsaturated Ti atom facilitates the direct recombination of surface‐confined Fe−•OOH and Ti−•OO− to yield 1O2, bypassing the formidable •O2−*/•OOH* desorption process. Impressively, Fe1−OV−Ti could realize an excellent 1O2 electrosynthesis rate of 54.5 μmol L−1 min−1 with an outstanding 1O2 selectivity of 97.6 % under neutral condition, surpassing that of Fe1−O−Ti (27.1 μmol L−1 min−1, 91.7 %). Using tetracycline (TC) as a model pollutant, the resulting Fe1−OV−Ti electrode achieved nearly 100 % degradation in 120 min at −0.6 V, meanwhile preventing the generation of toxic intermediates. This study provides a new 1O2 electrosynthesis strategy by controlling the distance of adjacent catalytic sites for the coactivation of dual molecular oxygen.

Delocalized Orbitals over Metal Clusters and Organic Linkers Enable Boosted Charge Transfer in Metal–Organic Framework for Overall CO2 Photoreduction

AbstractThe conversion of CO2 to C2 through photocatalysis poses significant challenges, and one of the biggest hurdles stems from the sluggishness of the multi‐electron transfer process. Herein, taking metal–organic framework (MOF, PFC‐98) as a model photocatalyst, we report a new strategy to facilitate charge separation. This strategy involves matching the energy levels of the lowest unoccupied node and linker orbitals of the MOF, thereby creating the lowest unoccupied crystal orbital (LUCO) delocalized over both the node and linker. This feature enables the direct excitation of electrons from photosensitive linker to the catalytic centers, achieving a direct charge transfer (DCT) pathway. For comparison, an isoreticular MOF (PFC‐6) based on analogue components but with far apart frontier energy level was synthesized. The delocalized LUCO caused the presence of an internal charge‐separated (ICS) state, prolonging the excited state lifetime and further inhibiting the electron‐hole recombination. The presence of ICS state prolongs the excited state lifetime and further inhibits the electron‐hole recombination. Moreover, it also induced abundant electrons accumulating at the catalytic sites, enabling the multi‐electron transfer process. As a result, the material featuring delocalized LUCO exhibits superior overall CO2 photocatalytic performance with high C2 production yield and selectivity.

Elaborate construction of a MOF-derived novel morphology Z-scheme ZnO/ZnCdS heterojunction for enhancing photocatalytic H2 evolution and tetracycline degradation

Elaborate construction of novel Z-scheme heterojunction with exceptional morphology derived from metal-organic framework (MOF) have been attracted greatly interest for improving the photocatalytic ability. Herein, a Z-scheme ZnO/ZnCdS heterojunction of rare morphology with ultrathin-nanosheet assembled hierarchical morphology ZnCdS supporting on rich gap ZnO nanospheres were constructed from Zn-based MOF (namely PZH-139) for the first time. This unique feature increased specific surface area, offered abundant mass transport channels and accessible catalytic active sites, accelerated electron migration, which highly elevated photocatalytic property. Furthermore, electron paramagnetic resonance (EPR) measurements and density functional theory (DFT) calculations confirmed the reservation of strong redox capability owing to Z-scheme electron transfer path and the ΔGH* closer to zero of Z-scheme ZnO/ZnCdS system were another two key factors for boosting the photocatalytic activity. As a result, 3-ZnO-700/ZnCdS-160 with optimal morphology showed the best H2 generation performance of 15.43 mmol h−1 g−1 and degradation tetracycline (TC) efficiency of 98.14 %. This work offered a novel and feasible idea for elaborate synthesis of the high-efficiency Z-scheme ZnO/ZnCdS heterojunction with special morphology derived from Zn-MOF.