Electrocatalyst For Oxidation Research Articles

2D petal-like PdAg nanosheets promote efficient electrocatalytic oxidation of ethanol and methanol.

The development of efficient alcohol electrooxidation catalysts is of vital importance for the commercialization of direct liquid fuel cells. As emerging advanced catalysts, two-dimensional (2D) noble metal nanomaterials have attracted much research attention due to their intrinsic structural advantages. Herein, we report the synthesis of petal-like PdAg nanosheets (NSs) with an ultrathin 2D structure and jagged edges via a facile wet-chemical approach, combining doping engineering and morphology tuning. Notably, the highly active sites and Pd-Ag composition endowed PdAg NSs with improved toxicity tolerance and substantially improved the durability toward the ethanol/methanol oxidation reaction (EOR/MOR). Moreover, the electronic effect and synergistic effect significantly enhanced the EOR and MOR activities in comparison with Pd NSs and commercial Pd/C. This work provides efficient catalysts for fuel electrooxidations and deep insight into the rational design and fabrication of novel 2D nanoarchitecture.

Nickel-modified poly(aniline-co-pyrrole) as electrocatalyst for electrochemical oxidation of methanol in direct methanol fuel cell application

Nickel-modified poly(aniline-co-pyrrole) as electrocatalyst for electrochemical oxidation of methanol in direct methanol fuel cell application

Nickel-modified poly(aniline-co-pyrrole) as electrocatalyst for electrochemical oxidation of methanol in direct methanol fuel cell application

Nickel-modified poly(aniline-co-pyrrole) as electrocatalyst for electrochemical oxidation of methanol in direct methanol fuel cell application

Rationally Designed L12-Pt2RhFe Intermetallic Catalyst with High CO-Tolerance for Alkaline Methanol Electrooxidation.

It is a grand challenge to deep understanding of and precise control over functional sites for the rational design of highly efficient catalysts for methanol electrooxidation. Here, an L12-Pt2RhFe intermetallic catalyst with integrated functional components is demonstrated, which exhibits exceptional CO tolerance. The Pt2RhFe/C achieves a superior mass activity of 6.43 A mgPt -1, which is 2.23-fold and 3.53-fold higher than those of PtRu/C and Pt/C. Impressively, the Pt2RhFe/C exhibits a significant enhancement in durability owing to its high CO-tolerance and stability. Density functional theory calculations reveal that high performance of Pt2RhFe intermetallic catalyst arises from the synergistic effect: the strong OH binding energy (OHBE) at Fe sites induce stably adsorbed OH species and thus facilitate the dehydrogenation step of methanol via rapid hydrogen transfer, while moderate OHBE at Rh sites promote the formation of the transition state (Pt-CO···OH-Rh) with a low activation barrier for CO removal. This work provides new insights into the role of OH binding strength in the removal of CO species, which is beneficial for the rational design of highly efficient catalysts.

Research on carbon black and cerium co-doped Ti4O7-CB-Ce electrocatalytic oxidation of tetracycline-based antibiotics.

Elemental doping is a promising way for enhancing the electrocatalytic activity of metal oxides. Herein, we fabricate Ti/ Ti4O7-CB-Ce anode materials by the modification means of carbon black and cerium co-doped Ti4O7, and this shift effectively improves the interfacial charge transfer rate of Ti4O7 and •OH yield in the electrocatalytic process. Remarkably, the Ti4O7-CB-Ce anode exhibits excellent efficiency of minocycline (MNC) wastewater treatment (100% removal within 20 min), and the removal rate reduces from 100 to 98.5% after five cycles, which is comparable to BDD electrode. •OH and 1O2 are identified as the active species in the reaction. Meanwhile, it is discovered that Ti/ Ti4O7-CB-Ce anodes can effectively improve the biochemical properties of the non-biodegradable pharmaceutical wastewater (B/C values from 0.25 to 0.44) and significantly reduce the toxicity of the wastewater (luminescent bacteria inhibition rate from 100 to 26.6%). This work paves an effective strategy for designing superior metal oxides electrocatalysts.

One-step hydrothermal preparation of CeMo-codoped Ni3S2 as robust bifunctional electrocatalyst for urea oxidation and methanol oxidation

The production of hydrogen via electrolytic water splitting is mainly limited by the high overpotential of the oxygen evolution reaction (OER). Thus, the replacement of OER with more thermodynamically favorable urea oxidation (UOR) and methanol oxidation (MOR) reactions shows good promise. In this paper, a CeMo-Ni3S2/NF bifunctional electrocatalyst for UOR and MOR electrolysis was prepared by a one-step hydrothermal method. The experiments reveal that the doped Ce and Mo cations significant modulate the morphology of Ni3S2, and thus significant boost the electrochemically active surface area and increase the UOR and MOR performance. At a current density of 100 mA cm−2, UOR requires a potential of 1.35 V (vs. RHE) and MOR requires 1.38 V (vs. RHE), which are both significantly lower than the potential of 1.59 V (vs. RHE) required for OER. The UOR reaction produces NO2- with a Faradaic efficiency of 69.0 %, while the MOR reaction produces formate with a Faradaic efficiency of 81.5 %. These results provide strategies for the development of advanced MOR and UOR electrode materials.

Lithium cation-doped tungsten oxide as a bidirectional nanocatalyst for lithium-sulfur batteries with high areal capacity

Lithium-sulfur (Li-S) batteries are promising for high energy-storage applications but suffer from sluggish conversion reaction kinetics and substantial lithium sulfide (Li2S) oxidation barrier, especially under high sulfur loadings. Here, we report a Li cation-doped tungsten oxide (LixWOx) electrocatalyst that efficiently accelerates the S↔Li2S interconversion kinetics. The incorporation of Li dopants into WOx cationic vacancies enables bidirectional electrocatalytic activity for both polysulfide reduction and Li2S oxidation, along with enhanced Li+ diffusion. In conjunction with theoretical calculations, it is discovered that the improved electrocatalytic activity originates from the Li dopant-induced geometric and electronic structural optimization of the LixWOx, which promotes the anchoring of sulfur species at favourable adsorption sites while facilitating the charge transfer kinetics. Consequently, Li-S cells with the LixWOx bidirectional electrocatalyst show stable cycling performance and high sulfur utilization under high sulfur loadings. Our approach provides insights into cation engineering as an effective electrocatalyst design strategy for advancing high-performance Li-S batteries.

Dynamic in situ reconstruction of NiSe2 promoted by interfacial Ce2(CO3)2O for enhanced water oxidation

Understanding and manipulating the structural evolution of water oxidation electrocatalysts lays the foundation to finetune their catalytic activity. Herein, we present a synthesis of NiSe2-Ce2(CO3)2O heterostructure and demonstrate the efficacy of interfacial Ce2(CO3)2O in promoting the formation of catalytically active centers to improve oxygen evolution activity. In-situ Raman spectroscopy shows that incorporation of Ce2(CO3)2O into NiSe2 causes a cathodic shift of the Ni2+→Ni3+ transition potential. Operando electrochemical impedance spectroscopy reveals that strong electronic coupling at heterogeneous interface accelerates charge transfer process. Furthermore, density functional theory calculations suggest that actual catalytic active species of NiOOH transformed from NiSe2, which is coupled with Ce2(CO3)2O, can optimize electronic structure and decrease the free energy barriers toward fast oxygen evolution reaction (OER) kinetics. Consequently, the resultant NiSe2-Ce2(CO3)2O electrode exhibits remarkable electrocatalytic performance with low overpotentials (268/304 mV @ 50/100 mA cm−2) and excellent stability (50 mA cm−2 for 120 h) in the alkaline electrolyte. This work emphasizes the significance of modulating the dynamic changes in developing efficient electrocatalyst.

Unveiling the kinetics of oxygen evolution reaction in defect-engineered B/P-incorporated cobalt-oxide electrocatalysts

Defect-rich transition-metal oxide electrocatalysts hold great promise for alkaline water electrolysis due to their enhanced activity and stability. This study presents a new strategy that significantly improve the OER activity of Co-oxide nanosheets through incorporation of B and P (B/P-CoOx NS), eventually leading to abundant surface defects and oxygen vacancies. The B/P-CoOx NS demonstrates low overpotential of 220 mV to achieve 10 mA/cm2. The electrochemical and kinetic studies coupled with conventional morphological and structural characterizations, reveal that various crystalline defects like vacancies, dislocations, twin planes, and grain boundaries play crucial roles in promoting the OH− ion adsorption, the formation of intermediates, and the desorption of oxygen molecules. The industrial viability of the developed electrocatalyst is substantiated through assessments under harsh industrial conditions of 6 M KOH at 60 °C in a zero-gap single-cell alkaline electrolyzer which achieves 1 A/cm2 at 1.95 V. Chronoamperometry tests (100 h) highlight remarkable robustness of the electrocatalyst. This work establishes a new strategy to fabricate defect-rich OER electrocatalysts, setting a precedent to achieve better OER rates with non-noble materials.

Open Active Sites in Ni-Based MOF with High Oxidation States for Electrooxidation of Benzyl Alcohol.

The kinetics of electrocatalytic reactions are closely related to the number and intrinsic activity of the active sites. Open active sites offer easy access to the substrate and allow for efficient desorption and diffusion of reaction products without significant hindrance. Metal-organic frameworks (MOFs) with open active sites show great potential in this context. To increase the density of active sites, trimesic acid was utilized as a ligand to anchor more Ni sites and in situ construct the nickel foam-loaded Ni-based trimesic MOF electrocatalyst (Ni-TMA-MOF/NF). When tested as an electrocatalyst for benzyl alcohol oxidation, Ni-TMA-MOF/NF exhibited lower overpotential and superior durability compared to Ni foam-loaded Ni-based terephthalic MOF electrocatalyst (Ni-PTA-MOF/NF) and Ni(OH)2 nanosheet array (Ni(OH)2/NF). Ni-TMA-MOF/NF required only a low potential of 1.65 V to achieve a high current density of 400 mA cm-2. Even after 40000 s of electrocatalytic oxidation at 1.5 V, Ni-TMA-MOF/NF maintained a current density of 175 mA cm-2 with ∼68% retention, showing its potential for benzyl alcohol oxidation. Through a combination of experimental and theoretical investigations, it was found that Ni-TMA-MOF/NF displayed superior electrocatalytic activity due to an optimized electron structure with high-valence Ni species and a high density of active sites, enabling long-term stable operation at high current densities. This study provides a new perspective on the design of electrocatalysts for benzyl alcohol oxidation.

A Perspective on Protective Carbon Shells for Improved Stability of Alkaline Water Oxidation Electrocatalysts

A Perspective on Protective Carbon Shells for Improved Stability of Alkaline Water Oxidation Electrocatalysts

High-Throughput Screening Strategy for Electrocatalysts for Selective Catalytic Oxidation of Formaldehyde to Formic Acid.

Electrocatalytic oxidation of formaldehyde (FOR) is an effective way to prevent the damage caused by formaldehyde and produce high-value products. A screening strategy of a single-layer MnO2-supported transition metal catalyst for the selective oxidation of formaldehyde to formic acid was designed by high-throughput density functional calculation. N-MnO2@Cu and MnO2@Cu are predicted to be potential FOR electrocatalysts with potential-limiting steps (PDS) of 0.008 and -0.009 eV, respectively. Electronic structure analysis of single-atom catalysts (SACs) shows that single-layer MnO2 can regulate the spin density of loaded transition metal and thus regulate the adsorption of HCHO (Ead), and Ead is volcanically distributed with the magnetic moment descriptor -|mM - mH|. In addition, the formula quantifies Ead and |mM - mH| to construct a volcano-type descriptor α describing the PDS [ΔG(*CHO)]. Other electronic and structural properties of SACs and α are used as input features for the GBR method to construct machine learning models predicting the PDS (R2 = 0.97). This study hopes to provide some insights into FOR electrocatalysts.

PdSnW Ternary Alloy Nanoparticle with Excellent CO Anti‐Poisoning Activity for Boosting Alkaline Ethanol Oxidation Reaction

AbstractEfficient ethanol oxidation reaction (EOR) catalysts with anti‐poisoning ability and high selectivity are in high demand for the widespread application of direct ethanol fuel cells (DEFCs). Here, the PdSnW ternary alloy nanoparticles are synthesized by a facile solvothermal method and exhibit an enhanced EOR catalytic performance. CO stripping experiment, X‐ray photoelectron spectroscopy and in situ Fourier transform infrared are employed to study the correlation between catalyst structure and EOR catalytic performance. The oxyphilic Sn and W not only provide dangling O−H bond, accelerating the subsequent oxidation of adsorbed intermediate CO species, but also moderate the electron state of Pd, enhancing the adsorption of CH3CH2OH, thus resulting in the promotion of C−C bond cleavage and an increased C1 selectivity. As a consequence, PdSnW alloy nanoparticle catalyst exhibit a better stability and a higher mass activity than those of Pd/C, PdSn and PdW, respectively. This work not only offers novel insights to strategically design highly efficient electrocatalysts for ethanol oxidation, but also further clarifies the inherent structure‐activity relationship.

CLARIFYING GLYCEROL ELECTROOXIDATION STUDIES ON Pd-BASED CATALYSTS: INSIGHTS INTO CATALYTIC PERFORMANCE AND PRACTICAL CHALLENGES.

Escalating biodiesel production led to a surplus of glycerol, prompting its exploration as a valuable resource in industrial applications. Electrochemical systems have been studied, specifically employing noble metal catalysts like palladium for glycerol electrooxidation. Despite numerous studies on Pd-based catalysts for glycerol electrooxidation, a comprehensive analysis addressing critical questions related to the economic feasibility, global sourcing of Pd, and the thematic cohesion of publications in this field is lacking. Moreover, a standardized framework for comparing the results of various studies is absent, hindering progress on glycerol technologies. This critical overview navigates the evolution of Pd-based catalysts for glycerol electrooxidation, examining catalytic activity, stability, and potential applications. It critically addresses the geographical sources of Pd, the motivation behind glycerol technology exploration, thematic coherence in existing publications, and the meaningful comparison of results. It correlates the use of Pd-based catalysts with the natural source of Pd and the origin of glycerol derived from biodiesel. The proposed standardized approach for comparing electrochemical parameters and establishing experimental protocols provides a foundation for meaningful study comparisons. This critical overview underscores the need to address fundamental questions to accelerate the transition of glycerol technologies from laboratories to practical applications.

PtPd @CeO2 nanoparticles highly dispersed on carbon nanotubes as efficient electrocatalysts for methanol oxidation

Pt-based alloys have garnered significant attention due to its high electro-catalytic activity and stability. In this study, CeO2 nanoparticles were uniformly loaded onto carbon nanotube. Pt-Pd alloy particles were electrodeposited onto CeO2 nanoparticles to form Pt-Pd@CeO2/carbon nanotubes composites (Pt-Pd@CeO2/CNTs). Performance characterization results showed that Pt1Pd1.8@CeO2/CNTs electrocatalyst exhibited outstanding mass activity (2521 mA·mg Pt+Pd−1) for MOR, which was 7.9 times higher than that of Pt/C catalyst. The synergistic effect of Pt-Pd substantially enhanced the activity and the active oxygen-containing substances of CeO2 effectively improved the anti-CO poisoning ability. This work has provided a new pathway for developing high-performance catalytic catalysts for MOR.

Enhanced methanol electrooxidation catalysis via dual modulation of PtCu alloy and oxygen vacancies

Achieved by introducing defect sites, enhances both the catalytic activity and stability of catalysts. This is crucial for advancing key applications in energy conversion and environmental protection. Here, we introduce a novel Pt-Cu@CeO2/MWCNTs electrocatalyst prepared by dual modulation of the oxygen vacancy anchoring point and the center of the alloying d-band. This catalyst significantly boosts the rate of methanol oxidation. The Pt-Cu@CeO2/MWCNTs catalyst demonstrates a mass activity 3.7 times higher than that of commercial Pt/C, along with exceptional durability. The electron transfer between the PtCu alloy and the oxygen vacancies effectively modulates the d-band center of Pt, leading to a “volcano” relationship between the catalyst’s mass activity and the d-band center. This study advances the development of methanol electrooxidation catalysts by introducing a novel “double enhancement effect” model.

Integrated Iron Phosphides and Cobalt Oxide Electrocatalyst For Enhanced Hydrogen and Oxygen Evolution Reactions: A Study on Activity and Stability Factors.

Integrated Iron Phosphides and Cobalt Oxide Electrocatalyst For Enhanced Hydrogen and Oxygen Evolution Reactions: A Study on Activity and Stability Factors.

Copper-Nickel Bimetallic Coordination Polymers as Precursors for New Cu-Ni Oxide Electrocatalyst for OER

Copper-Nickel Bimetallic Coordination Polymers as Precursors for New Cu-Ni Oxide Electrocatalyst for OER

N-doped hollow carbon nanospheres embedded in N-doped graphene loaded with palladium nanoparticles as an efficient electrocatalyst for formic acid oxidation

N-doped hollow carbon nanospheres embedded in N-doped graphene loaded with palladium nanoparticles as an efficient electrocatalyst for formic acid oxidation

Controllable Synthesis of Fe2O3/Nickel Cobaltite Electrocatalyst to Enhance Oxidation of Small Molecules

Nickel-based catalysts have been widely recognized as highly promising electrocatalysts for oxidation. Herein, we designed a catalyst surface based on iron oxide electrodeposited on NiCo2O4 spinel oxide. Nickel foam was used as a support for the prepared catalysts. The modified surface was characterized by different techniques like electron microscopy and X-ray photon spectroscopy. The activity of the modified surface was investigated through the electrochemical oxidation of different organic molecules such as urea, ethanol, and ethylene glycol. Therefore, the modified Fe@ NiCo2O4/NF current in 1.0 M NaOH and 1.0 M fuel concentrations reached 31.4, 27.1, and 17.8 mA cm−2 for urea, ethanol, and ethylene glycol, respectively. Moreover, a range of kinetic characteristics parameters were computed, such as the diffusion coefficient, Tafel slope, and transfer coefficient. Chronoamperometry was employed to assess the electrode’s resistance to long-term oxidation. Consequently, the electrode’s activity exhibited a reduction ranging from 17% to 30% over a continuous oxidation period of 300 min.