Catalyst For Reaction Research Articles

Novel Insight into the Synergistic Mechanism for Pd and Rh Promoting the Hydro-Defluorination of 4-Fluorophenol over Bimetallic Rh-Pd/C Catalysts.

This study explores the synergistic effect between the Rh and Pd of bimetallic Rh-Pd/C catalysts for the catalytic hydro-defluorination (HDF) of 4-fluorophenol (4-FP). It was found that 4-FP could not be efficiently hydro-defluorinated over 6% Pd/C and 6% Rh/C due to the inherent properties of Pd and Rh species in the dissociation of H2 and the activation of C-F bonds. Compared with 6% Pd/C and 6% Rh/C, bimetallic Rh-Pd/C catalysts, especially 1% Rh-5% Pd/C, exhibited much higher catalytic activity in the HDF of 4-FP, suggesting that the synergistic effect between the Rh and Pd of the catalyst was much more positive. Catalyst characterizations (BET, XRD, TEM, and XPS) were introduced to clarify the mechanism for the synergistic effect between the Rh and Pd of the catalyst in the HDF reaction and revealed that it was mainly attributed to the bifunctional mechanism: Pd species were favorable for the dissociation of H2, and Rh species were beneficial to the activation of C-F bonds in the HDF reaction. Meanwhile, the interaction between Rh and Pd species enabled Rh and Pd to exhibit a more positive synergistic effect, which promoted the migration of atomic H* from Pd to Rh species and thus enhanced the HDF of 4-FP. Furthermore, 1% Rh-5% Pd/C prepared using 20-40 equiv NaBH4 exhibited the best performance in the catalytic HDF of 4-FP. Catalysis characterizations suggested that appropriate Rh3+/Rh0 and Pd2+/Pd0 ratios were beneficial to the dissociation of H2 and the activation of C-F bonds, which caused the more positive synergistic effect between the Rh and Pd of Rh-Pd/C in the HDF reaction. This work offers a valuable strategy for enhancing the performance of catalytic HDF catalysts via promoting synergistic effects.

Oxophilic gallium single atoms bridged ruthenium clusters for practical anion-exchange membrane electrolyzer

The development of highly efficient and durable alkaline hydrogen evolution reaction (HER) catalysts is crucial for achieving high-performance practical anion exchange membrane water electrolyzer (AEMWE) at ampere-level current density. Herein, we report a design concept by employing Ga single atoms as an electronic bridge to stabilize the Ru clusters for boosting alkaline HER performance in practical AEMWE. Experimental and theoretical results collectively reveal that the bridged Ga sites trigger strong metal-support interaction for the homogeneous distribution of Ru clusters with high density, as well as optimize the Ru–H bond strength due to the electron transfer between Ru and Ga for enhanced intrinsic HER activity. Moreover, the oxophilic Ga sites near the Ru clusters tend to adsorb the hydroxyl species and accelerate the water dissociation for sufficient proton supplement in an alkaline medium. The Ru–GaSA/N–C catalyst exhibits a low overpotential of 4 ± 1 mV (10 mA cm−2) and high mass activity of 9.3 ± 0.5 A mg−1Ru at −0.05 V vs RHE. In particular, the Ru–GaSA/N–C-based AEMWE in 1 M KOH delivers a voltage of only 1.74 V to reach an industrial current density of 1 A cm−2, and can steadily operate at 1 A cm−2 for more than 170 h.

Exploring Catalytic Intermediates in Pd-Catalyzed Aerobic Oxidative Amination of 1,3-Dienes: Multiple Metal Interactions of the Palladium Nanoclusters.

Metal nanoclusters (NCs) have unique properties because of their small size, which makes them useful as catalysts in reactions like cross-coupling. Pd-catalyzed oxidative amination, which involves dehydrogenative C-N bond formation, uses Pd complexes as the active species. It is known that the catalytic conditions involve the formation of Pd(0) species from Pd NCs, but the precise role of Pd NCs in the transformations has not been established. In this study, we investigated the characteristic properties of Pd NCs in oxidative amination of 1,3-dienes. The reaction achieved direct amination of commercially accessible 1,3-dienes with secondary aromatic amines, providing a variety of nitrogen containing 1,3-dienes. The compound was applicable to radical polymerization to provide the nitrogen-fabricated 1,3-diene-based polymer, which exhibited a different thermal stability compared to aliphatic nitrogen-fabricated diene polymers. In addition to the synthetic utility, by combining X-ray absorption fine structure and small-angle X-ray scattering analysis, we revealed amines and 1,3-dienes affected metal leaching from the Pd nanoparticles and stabilization of Pd NCs in the catalytic reaction. Additionally, DFT calculation suggested that the catalytic intermediate contained multiple adjacent Pd atoms and was responsible for formation of an σ-allylic intermediate that is difficult to form with the use of Pd complexes. These results could be used to understand the underlying phenomenon in the oxidative coupling reaction and develop Pd NCs-based dehydrogenation.

Regulating Fe-spin state by doping P heteroatom in Fe-N-C catalyst derived from colloidal nanoparticles encapsulated ZIF-8 to boost oxygen reduction activity

Over the past decades, Fe-N-C carbon materials have been considered as one of the most ideal alternatives to the noble metal catalysts (e.g. Pt/C) for the sluggish oxygen reduction reaction (ORR) in zinc-air batteries and fuel cells. In this research, ZIF-8 cage encapsulation confinement strategy coupled with post P-doping has been employed to design porous P, N and Fe co-doped carbon (FeNC-P) for efficient oxygen reduction reaction (ORR). The zero-field cooling (ZFC) temperature-dependent magnetic susceptibility measurement revealed that incorporation of P in the Fe-N-C catalysts can induce the transition of spin polarization configuration, which promotes the desorption of *OH in the crucial step of the ORR reaction process. The best-performing FeNC-P catalyst displays a 1.00 V (vs RHE) of Eonset (onset potential) and a 0.90 V (vs RHE) of E1/2 (half-wave potential) in an alkaline solution, which exceeds the benchmark Pt/C catalyst. Moreover, it also delivers a high power density of 130 mW·cm−2 in the self-made zinc-air battery, surpassing the benchmark Pt/C catalyst (90 mW·cm−2).

Revealing the Role of Mo Leaching in the Structural Transformation of NiMo Thin Film Catalysts upon Hydrogen Evolution Reaction.

NiMo alloys are considered highly promising non-noble Hydrogen Evolution Reaction (HER) catalysts. Besides the synergistic effect of alloying elements, recent attention is drawn to the Mo leaching from the catalyst. This work investigates the role of Mo in NiMo alloys during HER, aiming to understand the interplay between compositional, structural, and electronic factors on the activity, and their effects on the electrode material and catalyst properties. For this purpose, sputter-deposited low roughness NixMo100-x thin films are produced. The investigation of catalyst performance depending on their chemical composition shows a volcano-shaped plot, peaking for the Ni65Mo35 alloy with the highest intrinsic activity in alkaline HER. A comprehensive electrode surface analysis combining transmission electron microscopy, X-ray photoelectron spectroscopy and atomic force microscopy identifies the leaching of Mo on a structural level and indicates the formation of a Ni(OH)2-rich surface area. The ultimate surface characteristics of the NiMo catalysts depend on the initial composition and the electrochemical procedure. Based on the findings, it conclude that the observed catalytic properties of NiMo alloys in HER are determined by a complex interplay of increasing roughness, available surface species and their synergies. The leaching of Mo has a proven structural effect and is considered one of several factors contributing to the enhanced catalyst activity.

Rational integration of MoSe2 and BN with TiO2 to design nanoengineered ternary heterojunctions for sustainable hydrogen energy: Experimental evidences and theoretical anticipations

Ternary MoSe2-BN/TiO2 and binary MoSe2–TiO2 heterostructures are epitomized as Tortoise and Hare nanocatalysts to outline the synergism between bilayered MoSe2-BN over pristine MoSe2 for their applicability in the photochemical and photo/-electrochemical water splitting operations. We report here the fabrication of MoSe2-BN integrated TiO2 catalytic systems and ascertained experimental and theoretical investigations of MoSe2-BN/TiO2 and MoSe2–TiO2 heterostructures that are directly proportional to their long-term applicability as the hydrogen evolution reaction (HER) catalysts. Optimized 5 wt% MoSe2-BN/TiO2 and 7.5 wt% MoSe2–TiO2 exhibited nearly 32-fold and 18-fold higher photochemical hydrogen evolution efficiency than bare TiO2 with 43.1% and 25.08% apparent quantum yield, respectively. Photo/-electrochemical studies verified the diversity of MoSe2-BN/TiO2 and MoSe2–TiO2 catalysts as applied potential values diminished drastically to attain benchmark 10 mA/cm2 current density for 5 wt % MoSe2-BN/TiO2 (0.31 V) and 7.5 wt% MoSe2–TiO2 (0.61 V). This work showcases the augmented HER activity of MoSe2-BN/TiO2 due to the shielding of MoSe2 grain boundaries via BN-encapsulation that impeded the degradation of MoSe2 in aqueous condition ascribed to its wide band energy in UV region making it the advanced tunnel barrier.

Development of Dual Cooperative Multi‐Urea Catalysts for Henry Reaction

AbstractA dual cooperative multi‐urea catalyst for Henry reaction was developed in which four urea groups were introduced into a rigid and rotatable framework. The tetraurea catalyst 1 showed higher activity for Henry reaction than its analogues, close‐bisurea 2 or distal‐bisurea 3 with two urea units, demonstrating additional cooperativity between the two substrate‐pinching catalytic sites of tetraurea 1. Addition of the reaction product to the reaction system resulted in a small amount of further activation. This work would provide a basis for new cooperative molecular catalysts, leading to a high degree of regulation based on allosteric cooperativity, e.g. with a distinct ON/OFF threshold for reactivity, or feedback activation by using the product as a reaction template.

Theoretical Insights of Curvature Effects of FeN4-Doped Carbon Nanotubes on ORR Activity.

The advancement of metal-air batteries is critically contingent on the progression of efficient catalysts for the oxygen reduction reaction (ORR). The potential applications of a series of FeN4-doped carbon nanotubes (Fe-N4CNTs) of varying diameters as ORR catalysts were examined using density functional theory. We explored the stability and electronic properties of Fe-N4CNTs by analyzing the energy and examining the density of states. A marked dependence of the catalytic performance on the nanotube diameter was observed: as the transition from (5, 5) to (10, 10) Fe-N4CNTs occurred, the catalytic activity on the outer surface of the carbon tubes enhanced progressively, with the overpotential reducing from 0.94 to 0.86 V. Conversely, the catalytic activity on the inner surface of the carbon tubes decreased progressively with the overpotential also increasing from 0.62 to 1.04 V. In addition, we found that curvature significantly affected the electronic structure and charge transfer at the FeN4 site, regulating the adsorption and desorption of reactants, intermediates, and products during electrocatalysis and thus influencing the catalytic activity of the Fe-N4CNTs. This investigation offers valuable guidance for the design of Fe-based single-atom catalysts and the practical application of Fe-N-C materials.

Facet-Dependent Evolution of Active Components on Spinel Co3O4 for Electrochemical Ammonia Synthesis.

Spinel cobalt oxides (Co3O4) have emerged as a promising class of catalysts for the electrochemical nitrate reduction reaction (eNO3RR) to ammonia, offering advantages such as low cost, high activity, and selectivity. However, the specific role of crystallographic facets in determining the catalysts' performance remains elusive, impeding the development of efficient catalysts. In this study, we have synthesized various Co3O4 nanostructures with exposed facets of {100}, {111}, {110}, and {112}, aiming to investigate the dependence of the eNO3RR activity on the crystallographic facets. Among the catalysts tested, Co3O4 {111} shows the best performance, achieving an ammonia Faradaic efficiency of 99.1 ± 1.8% with a yield rate of 35.2 ± 0.6 mg h-1 cm-2 at -0.6 V vs RHE. Experimental and theoretical results reveal a transformation process in which the active phases evolve from Co3O4 to Co3O4-x with oxygen vacancy (Ov), followed by a Co3O4-x-Ov/Co(OH)2 hybrid, and finally Co(OH)2. This process is observed for all facets, but the formation of Ov and Co(OH)2 is the most rapid on the (111) surface. The presence of Ov significantly reduces the free energy of the *NH2 intermediate formation from 1.81 to -0.53 eV, and plentiful active sites on the densely reconstructed Co(OH)2 make Co3O4 {111} an ideal catalyst for ammonia synthesis via eNO3RR. This work provides insights into the understanding of the realistic active components, offers a strategy for developing highly efficient Co-based spinel catalysts for ammonia synthesis through tuning the exposed facets, and helps further advance the design and optimization of catalysts in the field of eNO3RR.

High performance bagasse based iron–nitrogen-carbon catalyst for oxygen reduction reaction

The design and synthesis of highly stable and low-cost for the oxygen reduction reactions (ORR) catalysts to replace non-noble metal catalysts is crucial for their applications in fuel cells. In this work, bagasse activated carbon (BAC) was used as the carbon source to prepare the high specific area and multi-porous carbon. The BAC@FeN catalysts derived from BAC, FeCl2 and melamine were prepared by pre-activation treatment and high-temperature pyrolysis. The BAC@FeN-900–30 catalyst encapsulated with Fe3C and Fe3O4 exhibited an outstanding catalytic activity (Eonset = 1.01 V and E1/2 = 0.87 V) and superior operational stability of 90.50 % compared to Pt/C (20 wt%) catalyst. The results demonstrated that iron, carbon and nitrogen piggybacked BAC could generate abundant Fe-Nx active sites, which greatly improved the catalytic activity of ORR and had a broad application prospect in energy conversion.

Platinum-Ruthenium Bimetallic Nanoparticle Catalysts Synthesized Via Direct Joule Heating for Methanol Fuel Cells.

Platinum-Ruthenium (PtRu) bimetallic nanoparticles are promising catalysts for methanol oxidation reaction (MOR) required by direct methanol fuel cells. However, existing catalyst synthesis methods have difficulty controlling their composition and structures. Here, a direct Joule heating method to yield highly active and stable PtRu catalysts for MOR is shown. The optimized Joule heating condition at 1000°C over 50 microseconds produces uniform PtRu nanoparticles (6.32wt.% Pt and 2.97 wt% Ru) with an average size of 2.0 ± 0.5 nanometers supported on carbon black substrates. They have a large electrochemically active surface area (ECSA) of 239 m2 g-1 and a high ECSA normalized specific activity of 0.295mA cm-2. They demonstrate a peak mass activity of 705.9mA mgPt -1 for MOR, 2.8 times that of commercial 20 wt.% platinum/carbon catalysts, and much superior to PtRu catalysts obtained by standard hydrothermal synthesis. Theoretical calculation results indicate that the superior catalytic activity can be attributed to modified Pt sites in PtRu nanoparticles, enabling strong methanol adsorption and weak carbon monoxide binding. Further, the PtRu catalyst demonstrates excellent stability in two-electrode methanol fuel cell tests with 85.3% current density retention and minimum Pt surface oxidation after 24 h.

Synergizing ruthenium oxide with bimetallic Co2CrO4 for highly efficient oxygen evolution reaction

Designing efficient and stable oxygen evolution reaction (OER) catalyst is the basis for the development of sustainable electrolytic water energy techniques. In this work, we presented a heterogeneous-structured electrocatalyst composed of bimetallic oxides-modified RuO2 nanosheets supported on nikel foam (Co2CrO4/RuO2) using a hybrid hydrothermal, ion-exchange and calcination method. The unique synergy and interfacial coupling between Co2CrO4/RuO2 heterostructures are favorable for optimizing the electronic configuration at this interface and strengthening the charge transport capacity, thus strengthening the catalytic activity of the Co2CrO4/RuO2 catalyst. The experimental data demonstrate that Cr leaching facilitates the rapid reconstruction of the catalyst into oxyhydroxides (CoOOH), which are acknowledged to be the real active species of OER. Theoretical calculations show that the Co2CrO4/RuO2 heterostructure increases the density state at the Fermi energy level and lowers the d-band center, thereby strengthening the catalytic activity. The synthesized Co2CrO4/RuO2 catalyst exhibited OER performance with an overpotential of 209 mV at 10 mA cm−2 and displayed a low Tafel slope of 78.2 mV dec-1, which outperforms most reported advanced alkaline OER catalysts. This work contributes to a new tactic for the design and development of ruthenium oxide/bimetallic oxides electrocatalysts.

Gold Nanoparticle Mesoporous Carbon Composite as Catalyst for Hydrogen Evolution Reaction

Increased environmental pollution and the shortage of the current fossil fuel energy supply has increased the demand for eco-friendly energy sources. Hydrogen energy has become a potential solution due to its availability and green combustion byproduct. Hydrogen feedstock materials like sodium borohydride (NaBH4) are promising sources of hydrogen; however, the rate at which the hydrogen is released during its reaction with water is slow and requires a stable catalyst. In this study, gold nanoparticles were deposited onto mesoporous carbon to form a nano-composite catalyst (AuNP-MCM), which was then characterized via transmission electron microscopy (TEM), powder X-ray diffraction (P-XRD), and scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS). The composite’s catalytic ability in a hydrogen evolution reaction was tested under varying conditions, including NaBH4 concentration, pH, and temperature, and it showed an activation of energy of 30.0 kJ mol−1. It was determined that the optimal reaction conditions include high NaBH4 concentrations, lower pH, and higher temperatures. This catalyst, with its stability and competitively low activation energy, makes it a promising material for hydrogen generation.

Metal–Organic Framework-Derived Rare Earth Metal (Ce-N-C)-Based Catalyst for Oxygen Reduction Reactions in Dual-Chamber Microbial Fuel Cells

Pt supported on carbon (Pt/C) is deemed as the state-of-the-art catalyst towards oxygen reduction reactions (ORRs) in chemical and biological fuel cells. However, due to the high cost and scarcity of Pt, researchers have focused on the development of Earth-abundant non-precious metal catalysts, hoping to replace the traditional Pt/C catalyst and successfully commercialize the chemical and biological fuel cells. In this regard, electrocatalysts made of transition metals emerged as excellent candidates for ORRs, especially the electrocatalysts made of Fe and Co in combination with N-doped carbons, which produce potentially active M-N4-C (M=Co, Fe) ORR sites. At present, however, the transition metal-based catalysts are popular; recently, electrocatalysts made of rare earth metals are emerging as efficient catalysts, due to the fact that rare earth metals also have the potential to form rare earth metal-N4-C active sites, just like transition metal Fe-N4-C/Co-N4-C. In addition, mixed valance states and uniqueness of f-orbitals of the rare earth metals are believed to improve the redox properties of the catalyst that helps in enhancing ORR activity. Among the rare earth metals, Ce is the most interesting element that can be explored as an ORR electrocatalyst in combination with the N-doped carbon. Unique f-orbitals of Ce can induce distinctive electronic behavior to the catalyst that helps to form stable coordination structures with N-doped carbons, in addition to its excellent ability to scavenge the OH● produced during ORRs, therefore helping in catalyst stability. In this study, we have synthesized Ce/N-C catalysts by a metal–organic framework and pyrolysis strategy. The ORR activity of Ce/N-C catalysts has been optimized by systematically increasing the Ce content and performing RDE studies in 0.1 M HClO4 electrolyte. The Ce/N-C catalyst has been characterized systematically by both physicochemical and electrochemical characterizations. The optimized Ce/N-C-3 catalyst exhibited a half-wave potential of 0.68 V vs. RHE. In addition, the Ce/N-C-3 catalyst also delivered acceptable stability with a loss of 70 mV in its half-wave potential when compared to 110 mV loss for Pt/C (10 wt.%) catalyst, after 5000 potential cycles. When Ce/N-C-3 is used as a cathode catalyst in dual-chamber microbial fuel cells, it delivered a volumetric power density of ⁓ 300 mW m−3, along with an organic matter degradation of 74% after continuous operation of DCMFCs for 30 days.

Ultrafine PtFeMo intermetallic compound nanowires for efficient oxygen reduction reaction in proton exchange membrane fuel cells

To advance the application of proton exchange membrane fuel cells (PEMFCs), it is crucial to develop high-performance oxygen reduction reaction (ORR) catalyst. Pt-based alloy nanowires exhibit excellent ORR activity due to their unique one-dimensional structure, but transition metals undergo spontaneous leaching under the harsh operating condition, often leading to decreased activity. Herein, ultrafine PtFeMo intermetallic compound nanowires were successfully synthesized as a high-performance ORR catalyst for PEMFC. The average diameter of the nanowires was 2.1 nm and the incorporation of inexpensive and high melting point metal Mo improved both catalytic performance and structural stability. The as-prepared ultrafine PtFeMo intermetallic compound nanowires exhibited mass activity of 2.56 A mgPt−1 for ORR, which is higher than that of disordered PtFeMo alloy nanowires (1.36 A mgPt−1) and commercial Pt/C (0.24 A mgPt−1) in rotating disk electrode test. And it exhibited peak power density of 2716 mW cm−2 under 250 kPa H2-O2 single-cell and mass activity of 0.62 A mgPt−1 under 100 kPa H2-O2 single-cell test in PEMFC. After long-time durability test, the intermetallic compound nanowires maintained their original structure, composition and electrocatalytic performance well, highlighting the importance of Mo incorporation and ordered phase structure generation.

A novel tetra(4-pyridyl)porphyrin-palladium(0) functionalized polyacrylonitrile fiber as highly efficient and recyclable heterogeneous catalyst for the Heck reaction

A novel tetra(4-pyridyl)porphyrin-chelated palladium(0) nanoparticles functionalized polyacrylonitrile fiber (PANTPPF-Pd(0)) was prepared for the first time. Some necessary methods including Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), etc. were used to verify the micro structure and properties of PANTPPF-Pd(0). Furthermore, with the Heck reaction chosen as a model reaction to determine the catalytic activity of PANTPPF-Pd(0), the experiment results shows that PANTPPF-Pd(0) can efficiently catalyze the Heck reaction with high yields (47–99%) in extensive substrate scope (46 examples) under non-solvent condition. Noteworthily, the average size of Pd(0) nanoparticles observed by transmission electron microscopy (TEM) slightly increased from 2.32 nm to 2.59 nm after recycled 8 times achieving an 99% isolated yield of Heck reaction catalyzed by PANTPPF-Pd(0), which proves that the PANTPPF-Pd(0) can maintain satisfactory recyclability. Finally, based on the π-π stacking interactions and dipolar-dipolar interaction between tetra(4-pyridyl)porphyrin moieties in PANTPPF-Pd(0) and substrates, a novel heterogeneous “capture-catalyze” mechanisms was proposed.

Machine Learning Big Data Set Analysis Reveals C-C Electro-Coupling Mechanism.

Carbon-carbon (C-C) coupling is essential in the electrocatalytic reduction of CO2 for the production of green chemicals. However, due to the complexity of the reaction network, there remains controversy regarding the underlying reaction mechanisms and the optimal direction for catalyst material design. Here, we present a global perspective to establish a comprehensive data set encompassing all C-C coupling precursors and catalytic active site compositions to explore the reaction mechanisms and screen catalysts via big data set analysis. The 2D-3D ensemble machine learning strategy, developed to target a variety of adsorption configurations, can quickly and accurately expand quantum chemical calculation data, enabling the rapid acquisition of this extensive big data set. Analyses of the big data set establish that (1) asymmetric coupling mechanisms exhibit greater potential efficiency compared to symmetric coupling, with the optimal path involving the coupling CHO with CH or CH2, and (2) C-C coupling selectivity of Cu-based catalysts can be enhanced through bimetallic doping including CuAgNb sites. Importantly, we experimentally substantiate the CuAgNb catalyst to demonstrate actual boosted performance in C-C coupling. Our finding evidence the practicality of our big data set generated from machine learning-accelerated quantum chemical computations. We conclude that combining big data with complex catalytic reaction mechanisms and catalyst compositions will set a new paradigm for accelerating optimal catalyst design.

Facile hydrothermal synthesis of ZnIn2S4/TiO2 nanosheets for promoted hydrogen evolution reaction

The current study was conducted by introducing a narrow bandgap semiconductor, ZnIn2S4, with the goal of addressing the inefficiency of hydrolysis dissociation and the limited visible light absorption capacity faced by TiO2 as a hydrogen evolution reaction (HER) catalyst due to its low conduction band position and wide bandgap. Using a one-step hydrothermal process, ZnIn2S4 nanosheet/TiO2 nanorod heterostructures were built on nickel foam substrates. The nanosheet structure of ZnIn2S4 is shaped like a flower, which greatly increased the roughness of the TiO2 surface and revealed additional active sites. The ZnIn2S4/TiO2 heterostructure demonstrates quick reaction kinetics and effective electron transport capability, as demonstrated by the electrochemical test results. An overpotential of just 195 mV is required to obtain a current density of 10 mA cm−2. In addition, the overpotential is further decreased to 160 mV under simulated solar radiation. Furthermore, ZnIn2S4 addition minimizes the free energy of hydrogen adsorption on the TiO2 surface and optimizes the position of its Fermi energy level, improving the usage of photogenerated carriers, according to density functional theory (DFT) calculations. This work validates the prospective use of ZnIn2S4/TiO2 heterostructures in photoelectrocatalysis and offers a fresh viewpoint for developing high-performance HER catalysts.

"Bowling Collision Effect" of CoMo6 Polyoxometalate Units Enables Wide Temperature Range from -20 to 60°C and Dendrite Mitigation Li-S Batteries.

To improve the performance of Lithium-Sulfur (Li-S) batteries, the reaction catalysts of lithium polysulfides (LiPSs) reactions should have the characteristics of large surface area, efficient atomic utilization, high conductivity, small size, good stability, and strong adjustability. Herein, Anderson-type polyoxometalate ([TMMo6O24]n-, TM = Co, Ni, Fe, represented by TMMo6 POMs) are used as the modified materials for Li-S battery separator. By customizing the central metal atoms, this work gains insights into the layer-by-layer electron transfer mechanism between TMMo6 units and LiPSs, similar to the collision effect of a bowling ball. Theoretical analysis and in situ experimental characterization show that the changes of CoMo6 units with moderate binding energy and lowest Gibbs free energy result in the formation of robust polar bonds and prolonged S─S bonds after adsorption. Hence, the representative Li-S battery with CoMo6 and graphene composite modified separator has a high initial capacity of 1588.6mA h g-1 at 0.2 C, excellent cycle performance of more than 3000 cycles at 5 C, and uniform Li+ transport over 1900h. More importantly, this work has revealed the inherent contradiction between the kinetics and thermodynamics, achieving a stable cycle in the temperature range of -20 to 60°C.

Role of Fe and Cr doped ZnO nanoparticles for electrocatalytic oxygen evolution reaction

Developing highly efficient catalysts for oxygen evolution reactions using abundant earth-rich and non-precious metals poses a critical and indispensable challenge. In this study, Fe: 1, 3, and 5% and Cr: 2% doped ZnO nanoparticles (NPs) were synthesized by employing a simple solution combustion method (SCM) for oxygen evaluation reaction (OER). Using a variety of methods, the synthesized transition metal-doped metal oxides were thoroughly examined. The electrochemical behavior of the Fe and Cr-doped ZnO electrodes in an alkaline solution was investigated through LSV, EIS, CV, and CA. The electrochemical studies showed that ZnO/Cr/Fe:5 (η = 305 mV and Tafel slop = 46 mV/dec) demonstrates significant oxygen evolution reaction (OER) activity under alkaline conditions. All prepared samples exhibit good stabilities for up to 10 h.