Oxygen Evolution Reaction Catalysis Research Articles

Spectroscopic Investigations of Complex Electronic Interactions by Elemental Doping and Material Compositing of Cobalt Oxide for Enhanced Oxygen Evolution Reaction Activity

AbstractDoping and compositing are two universal design strategies used to engineer the electronic state of a material and mitigate its disadvantages. These two strategies are extensively applied to design efficient electrocatalysts for water splitting. Using cobalt oxide (CoO) as a model catalyst, it is proven that the oxygen evolution reaction (OER) performance can be progressively improved, first by Fe‐doping to form Fe‐CoO solid solution, and further by the addition of CeO2 to produce a Fe‐CoO/CeO2 composite. X‐ray absorption spectroscopy (XAS) reveals that distinct electronic interactions are induced by the processes of doping and compositing. Fe‐doping of CoO can break down the structural symmetry, changing the electronic structure of both Co and O species at the surface and decreasing the flat‐band potential (Vfb). In comparison, subsequent compositing of Fe‐CoO with CeO2 induces negligible electronic changes in the Fe‐CoO (as seen in ex situ characterizations), but significantly modifies the oxidative transformations of both Co and Fe under OER conditions. The spectroscopic investigations reveal that Fe‐doping and CeO2 compositing play different roles in modifying the electronic properties of CoO in its pristine state and during OER catalysis, in return, providing useful guidance for the design of more efficient electrocatalysts using these two strategies.

Facet-Dependent Surface Restructuring on Nickel (Oxy)hydroxides: A Self-Activation Process for Enhanced Oxygen Evolution Reaction.

Unraveling the catalyst surface structure and behavior during reactions is essential for both mechanistic understanding and performance optimization. Here we report a phenomenon of facet-dependent surface restructuring intrinsic to β-Ni(OH)2 catalysts during oxygen evolution reaction (OER), discovered by the correlative ex situ and operando characterization. The ex situ study after OER reveals β-Ni(OH)2 restructuring at the edge facets to form nanoporous Ni1-xO, which is Ni deficient containing Ni3+ species. Operando liquid transmission electron microscopy (TEM) and Raman spectroscopy further identify the active role of the intermediate β-NiOOH phase in both the OER catalysis and Ni1-xO formation, pinpointing the complete surface restructuring pathway. Such surface restructuring is shown to effectively increase the exposed active sites, accelerate Ni oxidation kinetics, and optimize *OH intermediate bonding energy toward fast OER kinetics, which leads to an extraordinary activity enhancement of ∼16-fold. Facilitated by such a self-activation process, the specially prepared β-Ni(OH)2 with larger edge facets exhibits a 470-fold current enhancement than that of the benchmark IrO2, demonstrating a promising way to optimize metal-(oxy)hydroxide-based catalysts.

Organic-inorganic hybrid interfaces with π-d electron coupling for preventing metal and sulfur leaching toward enhanced oxygen evolution reaction

Transition metal sulfides (TMSs) catalysts with high catalytic oxygen evolution reaction (OER) activity have been extensively studied, especially Fe and Co-based sulfides. Fe and Co active sites with a strong synergistic effect, which can adjust the electron density distribution and effectively improve the electrocatalytic OER activity. However, TMSs has poor stability in alkaline environment caused by metal ions and sulfur elements are facilitated to dissolve. In this work, TMSs was modified by polyaniline (PANI) to inhibit the precipitation of iron, cobalt, and sulfur elements and enhance its stability under alkaline conditions. Moreover, π-d structure can also be formed by the coating of polyaniline, which can further adjust its own electronic structure on the basis of stabilizing the TMSs structure, so as to improve the electrochemical performance, rendering them to stably operate at harsh environment for more than 90 h. These findings offer new guidance for improving the electrocatalytic stability of TMSs.

Multiwall carbon nanotubes supported rhenium doped Co3O4 as an efficient electrocatalyst for water oxidation in alkaline medium

The recent trends for the development of efficient and low cost transition metal (TMs) based anode catalysts for water splitting is crucial and important. Even though, research is continuously progressing in different directions to design catalyst; however, catalytic OER (oxygen evolution reaction) activity has remained insufficient. Till now, various transition metal oxides (TMOs) have been used as efficient and cost-effective electrocatalyst for the oxygen evolution reaction. The catalytic performance of TMOs could be enhanced by doping with the metal, which increases the catalyst's charge transfer and electronic conductivity. Decoration of TMOs with the multi-wall carbon nanotube (MWCNT) further improves catalytic activity by providing numerous active sites. Here, Co3O4/MWCNT and Rhenium (Re) doped Co3O4/MWCNT composite were prepared by simple hydrothermal process and used as electrocatalyst for OER in alkaline medium. Different concentrations of Re (0.05 mmol, 0.1 mmol, 0.2 mmol, 0.3 mmol) were doped and it was observed that the electrochemical results of the 0.2 mmol Re doped Co3O4/ MWCNT (R0.2CO) was most efficient electrocatalyst which offers the OER overpotential of 298 mV/dec to attain the 10 mA cm−2 current density, lower Tafel slope (70 mV/dec), higher value of turn over frequency (0.95), lower value of the charge transfer resistance (3.10Ω) and good stability, demonstrating the better OER catalytic activity as compared to un-doped Co3O4/MWCNT (R0.0CO) catalyst. The investigated catalyst R0.2CO is more efficient catalyst than most of the reported similar type of catalysts and offers comparable electrocatalytic activity with benchmark electrocatalyst RuO2.

Fe site regulation and activity deciphering by selective phase transformation in the confined FeNi nanoparticles for oxygen evolution reaction

Given its initially low activity and difficulty in active phase formation, Fe site regulation is rarely touched in FeNi-based oxygen evolution reaction (OER) catalysts. Herein, the Fe sites regulation and activity deciphering are demonstrated by selective phase transformation taking nitrogen-doped carbon confined FeNi nanoparticles derived from Fe2Ni-MIL-MOF pyrolysis as an example; driven by the reduction atmosphere and Kirkendall effect assisted by melamine pyrolysis, some Fe and Ni sites were separated to form metallic Fe and FeNi alloy and the subsequent fluorination process induced the ionic compound FeF2 formation rather than NiF2, offering a good platform to evaluate the influence of active Fe phase for OER catalysis. Theoretical calculations combined with ex-situ and in-situ spectral characterization techniques proved the complete convention of FeF2 into a high-valent and reactive intermediate state of FeOOH. Considering the stable metallic state of Ni, the largely improved catalytic performance could be attributed to the Fe site regulation and the subsequent synergistic catalysis effect. Compared to the traditional iron-based catalyst, theoretically, the electronic structure of FeF2 was more conducive to the active FeOOH phase formation and significantly lowered the reaction energy barrier for OER. By addressing the aforementioned problems, low overpotential and good stability for OER catalysts were realized. The current work showed valid proof of the FeNi-based catalysts regulation via Fe sites for energy-relevant catalysis reactions.

Electron-deficient Co7Fe3 induced by interfacial effect of molybdenum carbide boosting oxygen evolution reaction

Developing a high-activity and low-cost catalyst to reduce the anodic overpotential is essential for hydrogen production from water splitting. In this work, a hetero-structured Co7Fe3/Mo2C@C catalyst has been developed to efficiently catalyze oxygen evolution reaction (OER), the overpotential (ƞ10) of Co7Fe3/Mo2C@C-catalyzed OER with current density of 10 mA/cm2 is about 254 mV, substantially lower than the counterparts of Co7Fe3@C-catalyzed OER (ƞ10, 308 mV) and Mo2C@C-catalyzed OER (ƞ10, 439 mV), close to that of OER catalyzed by commercial RuO2. The mechanistic studies reveal that the distinct electron transfer across the Co7Fe3/Mo2C interface results in electron-deficient Co7Fe3, which has been identified as the highly active catalytic sites. Density functional theory (DFT) calculations manifest that Mo2C induces a distinct decrease in electron density on Co7Fe3 and upgrades the d-band centers of Co and Fe in Co7Fe3 towards Fermi energy level, thus substantially lowering the energy barrier of the rate-determining reaction step and conferring significantly improved OER activity on the Co7Fe3/Mo2C@C catalyst.

Co-Ni co-sputter deposited bimetallic thin film catalysts for alkaline hydrogen and oxygen evolution reactions

Co-Ni bi-metallic thin films with different stoichiometries have been deposited by magnetron co-sputtering technique on Ni foam (NF), Si and carbon paper substrates. The structural and morphological characterisations of these films have been done by X-ray diffraction, X-ray absorption spectroscopy and Field Emission Scanning Electron Microscope measurements. The performances of these films for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) have been evaluated through electrochemical measurements like Linear Sweep Voltammetry, Cyclic Voltammetry and Electrochemical Impedance Spectroscopy measurements. Operando X ray absorption near edge spectroscopy measurements have also been carried out during HER and OER to decipher the redox reaction mechanisms. It has been observed that the HER and OER performance of all the Co Ni bi-metallic thin films on NF are found to be better than that of bare NF. The CoNi sample with composition of 58.7 % Co and 41.3 % Ni shows the best catalytic activity and stability towards HER and OER reactions. Though the HER activity is not the best but is comparable to many results reported in the literature, however the catalyst shows excellent OER activity with overpotential of 214 mV for 10 mA/cm2 current density. This is much better than that of the OER benchmark catalyst RuO2 and most of those reported in the literature. The OER is kinetically slower than HER and requires more overpotential, hence a significant improvement in the catalytic OER activity will definitely enhance the overall water splitting activity and hydrogen production efficiency. Thus the Co-Ni bi-metallic catalyst prepared by an easily scalable and highly reproducible magnetron co-sputtering technique has significant potential to emerge out as a technologically viable water splitting catalyst.

Prediction of Feasibility of Polaronic OER on (110) Surface of Rutile TiO2.

The polaronic effects at the atomic level hold paramount significance for advancing the efficacy of transition metal oxides in applications pertinent to renewable energy. The lattice-distortion mediated localization of photoexcited carriers in the form of polarons plays a pivotal role in the photocatalysis. This investigation focuses on rutile TiO2, an important material extensively explored for solar energy conversion in artificial photosynthesis, specifically targeting the generation of green H2 through photoelectrochemical (PEC) H2O splitting. By employing Hubbard-U corrected and hybrid density functional theory (DFT) methods, we systematically probe the polaronic effects in the catalysis of oxygen evolution reaction (OER) on the (110) surface of rutile TiO2. Theoretical understanding of polarons within the surface, coupled with simulations of OER at distinct titanium (Ti) and oxygen (O) active sites, reveals diverse polaron formation energies within the lattice sites with strong preference for bulk and surface bridge (Ob) oxygen sites. Moreover, we provide the evidence for the facilitative role of polarons in OER. We find that hole polarons situated at the equatorial oxygen sites near the Ti-active site, along with bridge site hole polarons distal from the Ob active site yield a small reduction in OER overpotential by ~0.06 eV and ~0.12 eV, respectively. However, subsurface, equatorial, and bridge site hole polarons significantly reduce the Ti-active site OER overpotential by ~0.4 eV through the peroxo-type oxygen pathway. We also observe that the presence of hole polarons stabilizes the *OH, *O, and *OOH intermediate species compared to the scenario without hole polarons. Overall, this study provides a detailed mechanistic insight into polaron-mediated OER, offering a promising avenue for improving the catalytic activity of transition metal oxide-based photocatalysts catering to renewable energy requisites.

Enhancing the Performance of 2D Ni-Fe Layered Double Hydroxides by Cabbage-Inspired Carbon Conjunction for Oxygen Evolution Reactions.

Layered double hydroxide (LDH) nanosheets as one type of two-dimensional materials have garnered increasing attention in the field of oxygen evolution reaction (OER) in recent decades. To address the challenges associated with poor conductivity and limited electron and charge transfer capability in LDH materials, we have developed a straightforward one-pot synthesis method to successfully fabricate a composite material with a microstructure resembling cabbage, which encompasses NiFe-LDH and nanocarbon (referred as NiFe-LDH@C). Atomic force microscopy (AFM) and high-resolution transmission electron microscopy (HRTEM) revealed that the monolayer NiFe-LDH with a height of ~ 0.5-0.8 nm is uniformly distributed and closely bonded to the carbon support, leading to a significant enhancement in conductivity and facilitating faster electron and charge transfer. Moreover, the NiFe-LDH@C exhibits a substantial number of surface defect sites, which enhances the interaction with oxygen species. This dual enhancement in charge transfer and oxygen species-mediated transfer greatly improves the catalytic OER performance, which is further corroborated by theoretical calculations. Notably, the Ni10Fe6-LDH@C with the highest concentration of surface oxygen vacancies demonstrated superior water oxidation performance, surpassing commercially available RuO2 catalysts; an OER overpotential of 231 mV@10 mA cm-2 with a Tafel slope of 71 mV dec-1 was achieved.

Surface oxidation/spin state determines oxygen evolution reaction activity of cobalt-based catalysts in acidic environment

Co-based catalysts are promising candidates to replace Ir/Ru-based oxides for oxygen evolution reaction (OER) catalysis in an acidic environment. However, both the reaction mechanism and the active species under acidic conditions remain unclear. In this study, by combining surface-sensitive soft X-ray absorption spectroscopy characterization with electrochemical analysis, we discover that the acidic OER activity of Co-based catalysts are determined by their surface oxidation/spin state. Surfaces composed of only high-spin CoII are found to be not active due to their unfavorable water dissociation to form CoIII-OH species. By contrast, the presence of low-spin CoIII is essential, as it promotes surface reconstruction of Co oxides and, hence, OER catalysis. The correlation between OER activity and Co oxidation/spin state signifies a breakthrough in defining the structure-activity relationship of Co-based catalysts for acidic OER, though, interestingly, such a relationship does not hold in alkaline and neutral environments. These findings not only help to design efficient acidic OER catalysts, but also deepen the understanding of the reaction mechanism.

Perovskite for Electrocatalytic Oxygen Evolution at Elevated Temperatures.

The development of advanced electrolysis technologies such as anion exchange membrane water electrolyzer (AEMWE) is central to the vision of a sustainable energy future. Key to the realization of such AEMWE technology lies in the exploration of low-cost and high-efficient catalysts for facilitating the anodic oxygen evolution reaction (OER). Despite tremendous efforts in the fundamental research, most of today's OER works are conducted under room temperature, which deviates significantly with AEMWE's operating temperature (50-80 °C). To bridge this gap, it is highly desirable to obtain insights into the OER catalytic behavior at elevated temperatures. Herein, using the well-known perovskite catalyst Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF) as a proof of concept, the effect of temperature on the variation in OER catalytic activity and stability is evaluated. It is found that the BSCF's activity increases with increasing temperature due to enhanced lattice oxygen participation promoting the lattice oxygen-mediated OER process. Further, surface amorphization and cation leaching of BSCF become more pronounced as temperature increases, causing a somewhat attenuated OER stability. These new understandings of the fundamental OER catalysis over perovskite materials at industrial-relevant temperature conditions are expected to have strong implications for the research of OER catalysts to be deployed in practical water electrolyzers.

Assembled RhRuFe Trimetallene for Water Electrolysis.

Industrializing water electrolyzers demands better electrocatalysts, especially for the anodic oxygen evolution reaction (OER). The prevailing OER catalysts are Ir or Ru-based nanomaterials, however, they still suffer from insufficient stability. An alternative yet considerably less explored approach is to upgrade Rh, a known stable but moderately active element for OER electrocatalysis, via rational structural engineering. Herein, a precise synthesis of assembled RhRuFe trimetallenes (RhRuFe TMs) with an average thickness of 1nm for boosting overall water splitting catalysis is reported. Favorable mass transport and optimized electronic structure collectively render RhRuFe TMs with an improved OER activity of an overpotential of 330mV to deliver 10mAcm-2, which is significantly lower than the Rh/C control (by 601mV) and reported Rh-based OER electrocatalysts. In particular, the RhRuFe TMs-based water splitting devices can achieve the current density of 10mAcm-2 at a low voltage of 1.63V, which is among the best in the Rh-based bifunctional catalysts for electrolyzers. The addition of Fe in RhRuFe TMs can modulate the strain/electron distribution of the multi-alloy, which regulates the binding energies of H* and OH* in hydrogen and oxygen evolution reactions for achieving the enhanced bifunctional OER and HER catalysis is further demonstrated.

Ni and Co Active Site Transition and Competition in Fluorine-Doped NiCo(OH)2 LDH Electrocatalysts for Oxygen Evolution Reaction.

The oxygen evolution reaction (OER) performance of NiCo LDH electrocatalysts can be improved through fluorine doping. The roles of Ni and Co active sites in such catalysts remain ambiguous and controversial. In addressing the issue, this study draws upon the molecular orbital theory and proposes the active center competitive mechanism between Ni and Co. The doped F-atoms can directly impact the valence state of metal atoms or exert an indirect influence through the dehydrogenation, thereby modulating the active center. As the F-atoms are progressively aggregate, the eg orbitals of Ni and Co transition from e2 g to e1 g , and subsequently to e0 g . The corresponding valence state elevates from +2 to +3, and then to +4, signifying an initial increase followed by a subsequent decrease in the electrocatalytic performance. Furthermore, a series of F-NiCo LDH catalysts are synthesized to verify the eg orbital occupancy analysis, and the catalytic OER overpotentials are 303, 243, 240, and 246mV at the current density of 10mA cm-2 , respectively, which coincides well with the theoretical prediction. This investigation not only provides novel mechanistic insights into the transition and competition of Ni and Co in F-NiCo LDH catalysts but also establishes a foundation for the design of high-performancecatalysts.

Heterostructural NiFeW disulfide and hydroxide dual‐trimetallic core‐shell nanosheets for synergistically effective water oxidation

AbstractA stable and highly active core‐shell heterostructure electrocatalyst is essential for catalyzing oxygen evolution reaction (OER). Here, a dual‐trimetallic core‐shell heterostructure OER electrocatalyst that consists of a NiFeWS2 inner core and an amorphous NiFeW(OH)z outer shell is designed and synthesized using in situ electrochemical tuning. The electrochemical measurements of different as‐synthesized catalysts with a similar mass loading suggest that the core‐shell Ni0.66Fe0.17W0.17S2@amorphous NiFeW(OH)z nanosheets exhibit the highest overall performance compared with that of other bimetallic reference catalysts for the OER. Additionally, the nanosheet arrays were in situ grown on hydrophilic‐treated carbon paper to fabricate an integrated three‐dimensional electrode that affords a current density of 10 mA cm−2 at a small overpotential of 182 mV and a low Tafel slope of 35 mV decade−1 in basic media. The Faradaic efficiency of core‐shell Ni0.66Fe0.17W0.17S2@amorphous NiFeW(OH)z is as high as 99.5% for OER. The scanning electron microscope, transmission electron microscope, and X‐ray photoelectron spectroscopy analyses confirm that this electrode has excellent stability in morphology and elementary composition after long‐term electrochemical measurements. Importantly, density functional theory calculations further indicate that the core‐shell heterojunction increased the conductivity of the catalyst, optimized the adsorption energy of the OER intermediates, and improved the OER activity. This study provides a universal strategy for designing more active core‐shell structure electrocatalysts based on the rule of coordinated regulation between electronic transport and active sites.

Efficient NiFeCr0.1/NF by incorporating chromium to boost OER catalysis

This study developed ternary NiFeCr hydroxide microsphere composites for efficient oxygen evolution reaction (OER) in alkaline water. Compared to binary NiFe composites, the ternary composites exhibited superior electrocatalytic activity. In a 1 M KOH solution, the ternary composite demonstrated a low initial potential of 1.46 V (RHE), and the overpotential is only 268 mV @ 100 mA cm−2. Charge rearrangement due to chromium oxidation helped maintain iron's low oxidation state, preserving OER activity. The redistribution of chromium particles stabilized iron and prevented its dissolution in an alkaline solution. Consequently, the optimized NiFeCr catalyst exhibits excellent stability, with a stability of 200 h at 100 mA cm−2. This study offers a novel approach to designing efficient and stable catalysts for water decomposition.

Insights into the Origins of Solar‐Assisted Electrochemical Water Oxidation in Allotropic Co5.47N/CoN Heterojunctions

Solar irradiation can efficiently promote the kinetics of the oxygen evolution reaction (OER) during water splitting, where heterojunction catalysts exhibit excellent photoresponsive properties. However, insights into the origins of photoassisted OER catalysis remain unclear, especially the interfaced promotion under convergent solar irradiation (CSI). Herein, novel allotropic Co5.47N/CoN heterojunctions were synthesized, and corresponding OER mechanisms under CSI were comprehensively uncovered from physical and chemical aspects using the in situ Raman technique and electrochemical cyclic voltammetry method. Our results provide a unique mechanism where high‐energy UV light promotes the Co3+/4+ conversion process in addition to the ordinary photoelectric effect excitation of the Co2+ material. Importantly, visible light under CSI can produce a photothermal effect for Co2+ excitation and Co3+/4+ conversion, which promotes the OER significantly more than the usual photoelectric effect. As a result, Co5.47N/CoN (containing 28% CoN) obtained 317.9% OER enhancement, which provides a pathway for constructing excellent OER catalysts.

Dual‐Type Ru Atomic Sites for Efficient Alkaline Overall Water Splitting

AbstractMonotypic catalytic site for bifunctional hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) at low overpotential is a grand challenge in alkaline water splitting. Herein, a new strategy of dual‐type atomic site‐support interaction is reported, in which ruthenium heteroatoms are in situ implanted into both the N‐C nanosheet matrix (Ru1‐N‐C) and supported Co2P nanoparticle lattice (Ru2‐P‐Co) for boosting alkaline water splitting. It is found that the Ru1‐N‐C and Ru2‐P‐Co can give rise to a synergistic effect for boosting HER and OER catalysis. Density functional theory calculations disclose that for HER, the Ru‐functionalized Co sites in Co2P assume the task of expediting H2O adsorption‐dissociation, and the adjacent coordination unsaturated Ru1‐N‐C sites can facilitate the following H2 desorption kinetic. The study found that the hydrogen spillover mechanism contributes to an ultralow HER polarization of 69 mV at 10 mA cm−2. While for OER, due to electronegativity discrepancies, the doped Ru within Co2P triggers electronic coupling, thereby efficiently tuning Ru d‐band center. This grants its electronic characteristic preferred for modulating rate‐determining step of OER to reduce the corresponding energy barrier, leading to superior OER catalytic activity . This work offers new understandings into catalyzing different reactions with multiple intermediate adsorptions by different atomic site‐support interplays.

Multivalence-State Tungsten Species Facilitated Iridium Loading for Robust Acidic Water Oxidation.

The development of the proton exchange membrane water electrolyzer (PEMWE) is still limited by the prohibitive cost and scarcity of iridium (Ir)-based oxygen evolution reaction (OER) catalyst. This work presents a novel catalyst synthesized by precursor-atomization and rapid joule-heating method, successfully doping iridium atoms into polyvalent tungsten blends (W0 , W5+ , W6+ ) based on titanium substrate. The vacancy engineering of unsaturated tungsten oxide (W5+ , W6+ ) reconstructs the electronic structure of the catalyst surface, which resulting in the low-valence state iridium species, avoiding excessive oxidation of iridium and accelerating the catalytic kinetics. Meanwhile, metallic tungsten (W0 ) improves the conductivity of catalyst and guarantees the stable existence of oxygen vacancy. The TiIrWOx possesses excellent performance in acidic OER catalysis, requiring overpotential of only 181mV to drive 10.0mAcm-2 , and exhibiting a high mass activity of 753AgIr -1 at an overpotential of 300mV. The membrane electrode assembly (MEA) with TiIrWOx as anode electrocatalyst can reduce the Ir consumption amount by >60% compared to commercial IrO2 , and it can operated over 120h at a current density of 1.0Acm-2 .

Strategically Designed Pd-Induced Changes in Alkaline Hydrogen Evolution Reaction and Oxygen Evolution Reaction Performances of Electrochemical Water Oxidation by the Galvanically Synthesized MoO2/MoO3 Composite Thin Film.

Electrochemical water oxidation is believed to be an effective pathway to produce clean, carbon-free, and environmentally sustainable green energy. In this work, we report a simple, easy-to-construct, facile, low-cost, and single-step galvanic technique to synthesize a Pd-supported temperature-assisted MoOx thin film nanocomposite for effective water oxidation. The most suitable nanocomposite exhibits very low overpotential at 10 mA/cm2 with smaller Tafel slope values for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) processes in an alkaline medium. The formation of a metal oxide-metal junction accelerates the growth of more active sites, promoting induced electronic synergism at the MoOx-Pd interface. This endows higher electrical conductivity and faster electron transfer kinetics, thus accelerating the faster water dissociation reaction following the Tafel-Volmer mechanism to boost the HER process in an alkaline medium. The excellent electrochemical HER and OER performances of our electrocatalyst even supersede the accomplishments of the benchmark catalysts Pt/C and RuO2. Moreover, neither of these two catalysts demonstrates both catalytic reactions, i.e., HER and OER at the same time, which have been observed for our synthesized catalyst. Our findings illustrate the potential of a thin-film MoOx-Pd nanocomposite to be an exceedingly effective electrocatalyst developed by interface engineering strategies. This also provides insight into designing several other semiconductor composite catalysts using simple synthesis techniques for highly efficient HER/OER processes that could be alternatives to benchmark electrocatalysts for water electrolysis.

Construction of Ni2P@NiCo-BLDH nanocomposite with hierarchical porous structure on nickel foam as advanced oxygen evolution electrocatalyst

The fabrication of two-dimensional layered double hydroxides (LDHs) materials still faces great challenges, particularly in achieving precise modulation of lamellar metals and interlayer anions for electrocatalytic oxygen evolution reaction (OER). Herein, a hierarchical porous nanocomposite assembled by foam nickel (NF) supported borate anions incorporated bimetallic NiCo hydrotalcite (NiCo-BLDH) on the surface of nickel phosphide sheets (NF/Ni2P @ NiCo-BLDH) is prepared through the NF in-situ phosphating and electrodeposition approach as an electrocatalyst for achieving superior OER catalysis. In this design, introducing multi-phase and incorporated borate anions into LDHs can regulate their structure and properties, creating unique active sites and enhancing the adsorption efficiency of OH- to effectively improve the OER activity. Remarkably, the NF/Ni2P @ NiCo-BLDH electrode shows a low overpotential of 293 mV at 100 mA cm−2 for OER and a Tafel slope of 108.3 mV dec−1 in a 1.0 M KOH medium, surpassing most previously reported NiCo-based catalysts. Nevertheless, the NF/Ni2P electrode exhibits a lower overpotential for the hydrogen evolution reaction (HER) in a 1.0 M KOH medium compared to the NF/Ni2P @ NiCo-BLDH electrode. This work not only advances the catalytic activity of the NiCo-LDH-based materials in OER but also provides a new idea for large-scale electrocatalytic water splitting applications.