Carriers Of Bioactive Compounds Research Articles

Liposomes as Carriers of Bioactive Compounds in Human Nutrition.

This article provides an overview of the literature data on the role of liposomal structures and encapsulated substances in food technology and human nutrition. The paper briefly describes how liposomes are created and how they encapsulate food ingredients, which can either be individual compounds or plant extracts. Another very interesting application of liposomes is their use as antimicrobial carriers to protect food products from spoilage during storage. The encapsulation of food ingredients in liposomes can increase their bioavailability, which is particularly important for compounds with health-promoting properties but low bioavailability. Particular attention was paid to compounds such as phytosterols, which lower blood cholesterol levels but have very low absorption in the human body. In addition, consumer expectations and regulations for liposomes in food are discussed. To date, no in vivo human studies have been conducted to indicate which encapsulation methods give the best results for gastrointestinal effects and which food-added substances are most stable during food storage and processing. The paper identifies further lines of research that are needed before liposomes can be introduced into food.

Zein-Based Nanoparticles as Active Platforms for Sustainable Applications: Recent Advances and Perspectives.

Nanomaterials, due to their unique structural and functional features, are widely investigated for potential applications in a wide range of industrial sectors. In this context, protein-based nanoparticles, given proteins' abundance, non-toxicity, and stability, offer a promising and sustainable methodology for encapsulation and protection, and can be used in engineered nanocarriers that are capable of releasing active compounds on demand. Zein is a plant-based protein extracted from corn, and it is biocompatible, biodegradable, and amphiphilic. Several approaches and technologies are currently involved in zein-based nanoparticle preparation, such as antisolvent precipitation, spray drying, supercritical processes, coacervation, and emulsion procedures. Thanks to their peculiar characteristics, zein-based nanoparticles are widely used as nanocarriers of active compounds in targeted application fields such as drug delivery, bioimaging, or soft tissue engineering, as reported by others. The main goal of this review is to investigate the use of zein-based nanocarriers for different advanced applications including food/food packaging, cosmetics, and agriculture, which are attracting researchers' efforts, and to exploit the future potential development of zein NPs in the field of cultural heritage, which is still relatively unexplored. Moreover, the presented overview focuses on several preparation methods (i.e., antisolvent processes, spry drying), correlating the different analyzed methodologies to NPs' structural and functional properties and their capability to act as carriers of bioactive compounds, both to preserve their activity and to tune their release in specific working conditions.

Cytocompatibility, Antimicrobial and Antioxidant Activity of a Mucoadhesive Biopolymeric Hydrogel Embedding Selenium Nanoparticles Phytosynthesized by Sea Buckthorn Leaf Extract.

Phytosynthesized selenium nanoparticles (SeNPs) are less toxic than the inorganic salts of selenium and show high antioxidant and antibacterial activity. Chitosan prevents microbial biofilm formation and can also determine microbial biofilm dispersal. Never-dried bacterial nanocellulose (NDBNC) is an efficient carrier of bioactive compounds and a flexible nanofibrillar hydrophilic biopolymer. This study aimed to develop a selenium-enriched hydrogel nanoformulation (Se-HNF) based on NDBNC from kombucha fermentation and fungal chitosan with embedded biogenic SeNPs phytosynthesized by an aqueous extract of sea buckthorn leaves (SbLEx)-SeNPsSb-in order to both disperse gingival dysbiotic biofilm and prevent its development. We determined the total phenolic content and antioxidant activity of SbLEx. Liquid chromatography-mass spectrometry (LC-MS) and high-performance liquid chromatography (HPLC) were used for the identification of polyphenols from SbLEx. SeNPsSb were characterized by transmission electron microscopy-energy-dispersive X-ray spectroscopy (TEM-EDX), dynamic light scattering (DLS), zeta potential, Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) in small- and wide-angle X-ray scattering (SAXS and WAXS). The hydrogel nanoformulation with embedded SeNPsSb was characterized by SEM, FTIR, XRD, rheology, mucin binding efficiency, contact angle and interfacial tension measurements. We also assessed the in vitro biocompatibility, antioxidant activity and antimicrobial and antibiofilm potential of SeNPsSb and Se-HNF. TEM, DLS and SAXS evidenced polydisperse SeNPsSb, whereas FTIR highlighted a heterogeneous biocorona with various biocompounds. The contact angle on the polar surface was smaller (52.82 ± 1.23°) than that obtained on the non-polar surface (73.85 ± 0.39°). The interfacial tension was 97.6 ± 0.47 mN/m. The mucin binding efficiency of Se-HNF decreased as the amount of hydrogel decreased, and the SEM analysis showed a relatively compact structure upon mucin contact. FTIR and XRD analyses of Se-HNF evidenced an interaction between BNC and CS through characteristic peak shifting, and the rheological measurements highlighted a pseudoplastic behavior, 0.186 N adhesion force and 0.386 adhesion energy. The results showed a high degree of cytocompatibility and the significant antioxidant and antimicrobial efficiency of SeNPsSb and Se-HNF.

Mung bean protein as an emerging source of plant protein: a review on production methods, functional properties, modifications and its potential applications.

Plant protein is rapidly becoming more of a prime interest to consumers for its nutritional and functional properties, as well as the potential to replace animal protein. In the frame of alternative protein new sources, mung bean is becoming another legume crop that could provide high quality plant protein after soybean and pea. In particular, the 8S globulins in mung bean protein have high structural similarity and homology with soybean β-conglycinin (7S globulin), with 68% sequence identity. Currently, mung bean protein has gained popularity in food industry because of its high nutritional value and peculiar functional properties. In that regard, various modification technologies have been applied to further broaden its application. Here, we provide a review of the composition, nutritional value, production methods, functional properties and modification technologies of mung bean protein. Furthermore, its potential applications in the new plant-based products, meat products, noodles, edible packaging films and bioactive compound carriers are highlighted to facilitate its utilization as an alternative plant protein, thus meeting consumer demands for high quality plant protein resources. © 2023 Society of Chemical Industry.

Biological Role of Extracellular Vesicles in Myeloid Neoplasms: A Systematic Review of the Current Literature

Background and aim: Extracellular vesicles (EVs) are lipid-bilayer membrane vesicles secreted by a variety of cells that carry bioactive molecules like proteins, lipids and nucleic acids. They are of increasing interest as they play an important biological role in cancer by a multitude of cell-extrinsic and cell-intrinsic mechanisms. However, the investigations of their biology in myeloid malignancies has not been systematically reviewed so far. Therefore, the aim of this review was to summarize the currently published literature in the field and provide an overview of their potential clinical applications. Method: We performed a systematic literature research with defined search strings in the Embase, Medline and PubMed Central databases and used a standardized data-extraction form to collect all relevant information. Results: 63 of 1529 studies met the inclusion/exclusion criteria and could be assigned to seven main investigational categories ( A). They comprised studies on their effect on i) prothrombotic activity (n=13), ii) tumor-microenvironment (n=14), iii) malignant transformation (n=5), iv) tumor progression (n=4), v) chemotherapy-resistance (n=5) as well as their use as vi) biomarkers (n=14) and vii) pharmacotherapeutic carriers (n=3) ( B). The most relevant biological mechanism is the transfer of microRNA (miRNA) by EVs from different clonal and non-clonal cells, which target the microenvironment, vascular system, as well as immune cells. All mechanisms identified in our review were assigned to one of the seven main categories and the most relevant are summarized in C: i) Prothrombotic activity: Leukaemic cells shed prothrombotic EVs containing tissue-factor (TF) and anionic phosphatidylserine (PS), which facilitate the recruitment of coagulation factors and a pro-coagulant state ( Zannoni, 2019). Reduction of EVs from platelets and leucocytes after chemotherapy attenuates this pro-coagulant state ( Van Aalderen, 2011). ii) Tumor microenvironment: EVs derived from MDS cells can disrupt the osteolineage differentiation of bone marrow mesenchymal stromal cells (BM-MSCs) and impair hematopoiesis ( Hayashi, 2022). iii) Malignant transformation: EVs containing BCR-ABL1 mRNA are integrated into BM-MSCs, which induce BCR-ABL1 expression and secretion of TGF-β1 leading to enhanced proliferation of BM-MSCs ( Fu, 2017). iv) Tumor progression: EVs derived from leukemic cells promote tumor progression by reducing apoptosis and tumor immune-surveillance. v) Chemotherapy resistance: AML-cells expel PEGylated liposomal doxorubicin (PLD) through EVs thus increasing their resistance ( Hekmatirad, 2021). vi) Disease biomarkers: AML patients at diagnosis have a higher number of EVs carrying the myeloblast markers CD34, CD117, CD33 and HLA-DR than AML patients in remission or healthy controls ( Tzoran, 2015). Based on differential abundancy and the content of proteins, lipids and nucleid acids EVs may be suitable as biomarkers for diagnosis, prognosis, and disease monitoring. vii) Pharmacotherapeutic role: Cytotoxic T-lymphocytes are more effective in killing the parental leukaemic cells after being exposed to their cell-derived EVs. The mechanism is related to leukemia antigen presentation on EVs to dendritic cells (DCs) using ICAM1 and Hsp70 ( Shen C, 2011). Finally, EVs can be used as carriers for bioactive compounds and may expand their potential use for cell-type specific delivery of drugs. Conclusions: EVs open the window for the future investigation of novel pathophysiological mechanisms that will improve our understanding of their role in the biology of myeloid malignancies, Moreover, they hold promise as potential biomarkers and drug carriers for cell-type specific treatment

Bigels as novel carriers of bioactive compounds: Applications and research trends

Bigels have drawn more attention recently than other carriers because of their improved storage stability and potential for longer intestinal release. Due to their poor solubility, quick oxidation, and high degradation during physiological transit, bioactive compounds (bioactives) like flavors, essential oils, vitamins, and antioxidants are challenging to supply in food systems. Bigels are a new family of soft solid gels with intriguing release qualities, which can deliver drugs/nutritional supplement components. In order to design functional foods with bioactive-loaded bigels, this paper attempts to obtain a deeper understanding of the structures and functionalities of bigels as carriers by improving their stability and bioavailability. By manipulating the physical properties of bigels, such as how they behave during digestion in the digestive tract, it is possible to create bigels that behave differently in various environments. By adjusting bigels’ stability and release properties, the bioavailability of the incorporated bioactives would be enhanced. Also, bigels are appropriate for the production of foods with lower fat content.

Synthesis and Characterization of Alginate Gel Beads with Embedded Zeolite Structures as Carriers of Hydrophobic Curcumin.

Alginate-based beads containing a porous zeolite filler were developed as carriers of bioactive compounds with a hydrophobic nature, such as curcumin (Cur). Curcumin, a natural pigment extracted from the turmeric (Curcuma longa) plant, exhibits antioxidant, anti-inflammatory, anticarcinogenic, and antiviral properties. To enhance the bioavailability of the drug, curcumin needs to be encapsulated in a suitable carrier that improves its dispersibility and solubility. Commercial A-type zeolites (Z5A) were used as curcumin-binding agents and they were immobilized within the alginate gel beads by cross-linking in calcium chloride solution during an extrusion dripping process. The process parameters (alginate and CaCl2 concentrations, needle gauge, collecting distance) were optimized to fabricate beads with good sphericity factor and 1.5-1.7 mm diameter in their hydrated state. The chemical structure of the gel beads was assessed using FTIR spectroscopy, while their thermal stability was evaluated through differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Due to the alginate matrix, the composite Alg/ZA5-Cur beads possess pH-responsive properties. In addition, the gel beads were modified by chitosan (CS) to enhance the stability and control the degradation behavior of the gel matrix. The swelling behavior and the degradation of the beads were analyzed in physiological solutions with different pH values. Results demonstrate the stabilizing and protective effect of the chitosan coating, as well as the reinforcing effect of the zeolite filler. This makes the pH-responsive alginate gel beads good candidates for the delivery of lipophilic drugs to specific inflammatory sites.

LP-30: In vitro cytotoxicity assessment of phytosomes as carriers for bioactive compounds obtained from Hippophae rhamnoides berries

LP-30: In vitro cytotoxicity assessment of phytosomes as carriers for bioactive compounds obtained from Hippophae rhamnoides berries

The effects of biliverdin on pressure-induced unfolding of apomyoglobin: The specific role of Zn2+ ions

Apomyoglobin (apoMb), a model protein in biochemistry, exhibits a strong propensity to bind various ligands, which makes it a good candidate as a carrier of bioactive hydrophobic drugs. The stability of its hydrophobic pocket determines its potential as a carrier of bioactive compounds. High pressure (HP) is a potent tool for studying protein stability, revealing the specific role of hydrophobic cavities in unfolding. We probed the effects of biliverdin (BV) binding and its complex with Zn2+ ions on the structure and HP stability of apoMb. CD spectroscopy and SAXS measurements revealed that BV and BV-Zn2+ complexes make the apoMb structure more compact with higher α-helical content. We performed in situ HP measurements of apoMb intrinsic fluorescence to demonstrate the ability of BV to stabilise apoMb structure at HP conditions. Furthermore, the presence of Zn2+ within the apoMb-BV complex significantly enhances the BV stabilisation effect. In situ visible absorption study of BV chromophore confirmed the ability of Zn2+ to increase the stability of apoMb-BV complex under HP: the onset of complex dissociation is shifted by ∼100 MPa in presence of Zn2+. By combining HP-fluorescence and HP-visible absorption spectroscopy, our strategy highlights the crucial role of tetrapyrrole-metal complexes in stabilising apoMb hydrophobic pocket.

Stability and bioaccessibility of α-tocopherol-enriched nanoemulsions containing different edible oils as carriers

Nanoemulsions have been described as carriers of bioactive compounds since they can protect them during digestion and improve their bioaccessibility. However, their stability and bioaccessibility can be influenced by nanoemulsion composition, mainly by the lipid phase characteristics. Consequently, this study aimed to evaluate three different carrier oils (avocado-AVO, flaxseed-FLA, and chia-CHI) on the stability and bioaccessibility of α-tocopherol carried in nanoemulsions. Particle characteristics (particle size-PS and polydispersity index-PdI) and oxidative stability of nanoemulsions, and α-tocopherol degradation during storage were determined. In addition, free fatty acids (FFAs) release kinetics and α-tocopherol bioaccessibility during in vitro digestion were analyzed. Results showed that all nanoemulsions were colloidally stable due to their droplet characteristics (PS < 200 nm and PdI<0.2), where no phase separation was observed. AVO nanoemulsion was the most stable against oxidation due to its high monounsaturated and saturated fatty acids, while CHI nanoemulsion showed the highest chemical stability of α-tocopherol during storage. Besides, AVO nanoemulsion showed the most significant release of FFA (94%) and the highest α-tocopherol bioaccessibility (81%). In conclusion, the oil type affects the chemical stability and bioaccessibility of α-tocopherol carried in nanoemulsions. Thus, AVO oil can be used as a carrier of fat-soluble vitamins to increase its bioaccessibility during digestion.

Physicochemical, Thermal, and Morphological Properties of Chitosan Nanoparticles Produced by Ionic Gelation

Chitosan nanoparticles (CSNPs) can be widely used in the food, pharmaceutical, and cosmetic sectors due to their high performance, unique properties, and high surface area. In this research, CSNPs were produced by the ionic gelation method and using sodium tripolyphosphate (STPP) as an appropriate technique compared to the conventional methods. To evaluate the effects of various factors on the size, zeta potential (ZP), and optimal synthesis conditions, different concentrations of CS (1, 3, and 5 mg/mL), STPP (0.5, 0.75, and 1 mg/mL), and CS to STPP ratio (1:1, 3:1, and 5:1) were applied and optimized using the response surface methodology. The size of CSNPs was increased by using higher concentrations of CS, STPP, and CS/STPP ratios. The value of ZP was determined positive and it increased with increasing CS concentrations and CS/STPP ratios. ATR-FTIR spectra revealed interactions between CS and STPP. The DSC thermogram of CSNPs showed a double sharp endothermic peak at about 74.5 °C (ΔH = 122.00 J/g); further, the TGA thermograms indicated the total weight loss of STPP, CS, and CSNPs as nearly 3.30%, 63.60%, and 52.00%, respectively. The XRD data also revealed a greater chain alignment in the CSNPs. Optimized, the CSNPs can be used as promising carriers for bioactive compounds where they also act as efficient stabilizers in Pickering emulsions.

Low Release Study of Cefotaxime by Functionalized Mesoporous Silica Nanomaterials

As a third-generation β-lactam antibiotic, cefotaxime shows a broad-spectrum with Gram-positive and Gram-negative bacteria activity and is included in WHO's essential drug list. In order to obtain new materials with sustained release properties, the present research focuses on the study of cefotaxime absorption and desorption from different functionalized mesoporous silica supports. The MCM-41-type nanostructured mesoporous silica support was synthesized by sol-gel technique using a tetraethyl orthosilicate (TEOS) route and cetyltrimethylammonium bromide (CTAB) as a surfactant, at room temperature and normal pressure. The obtained mesoporous material (MCM-41 class) was characterized through nuclear magnetic resonance (NMR), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), N2 absorption-desorption (BET) and Fourier transform infrared spectroscopy (FT-IR), proving a good micro-structured homogeneity (SEM images), a high surface area (BET, 1029 m2/g) correlated with high silanolic activity (Q3/Q4 peak ratio from 29Si MAS-NMR), and an expected uniform hexagonal structure (2-3 nm, HRTEM). In order to non-destructively link the antibiotic compound on the solid phase, MCM-41 was further functionalized in two steps: with aminopropyl trimethoxysilane (APTMS) and glutaraldehyde (GA). Three cefotaxime-loaded materials were comparatively studied for low release capacity: the reference material with adsorbed cefotaxime on MCM-41, MCM-41/APS (aminopropyl silyl surface functionalization) adsorbed cefotaxime material, and APTMS-GA bounded MCM-41-cefotaxime material. The slow-release profiles were obtained by using an on-flow modified HPLC system. A significant improved release capacity was identified in the case of MCM-41/APS/GA-cefotaxime due to the covalent surface grafting of the biological active compound, recommending this class of materials as an effective carrier of bioactive compounds in wound dressing, anti-biofilm coatings, advanced drugs, and other related applications.

Antioxidant Effect of Ocimum basilicum Essential Oil and Its Effect on Cooking Qualities of Supplemented Chicken Nuggets.

A commonly observed chicken meat issue is its lipid oxidation that leads to deterioration of its organoleptic and nutritional properties and its further-processed products. Basil (Ocimum basilicum L.) is one of the traditional culinary herbs exhibiting food preservation properties. The current study investigated the essential oil composition, antioxidant activity and in vitro cytotoxic capacity of the essential oil of basil indigenous to Pakistan. GC–MS analysis of the essential oil revealed the presence of 59 compounds that constituted 98.6% of the essential oil. O. basilicum essential oil (OB-EO) exhibited excellent antioxidant activity, i.e., IC50 5.92 ± 0.15 µg/mL as assayed by the DPPH assay, 23.4 ± 0.02 µmoL Fe/g by FRAP, and 14.6 ± 0.59% inhibition by H2O2. The brine shrimp lethality assay identified an average mortality of ~18% with OB-EO at 10–1000 µg/mL, while that of the same concentration range of the standard drug (etoposide) was 72%. OB-EO was found to be non-toxic to HeLa and PC-3 cell lines. TBARS contents were significantly decreased with increase of OB-EO in chicken nuggets. The lowest TBARS contents were recorded in nuggets supplemented with 0.3% OB-EO, whereas the highest overall acceptability score was marked to the treatments carrying 0.2% OB-EO. The results suggest OB-EO as a promising carrier of bioactive compounds with a broad range of food preservation properties, and which has a sensory acceptability threshold level for chicken nuggets falling between 0.2-0.3% supplementation. Future research must investigate the antibacterial impact of OB-EO on meat products preserved with natural rather than synthetic preservatives.

Polysaccharide-Based Edible Gels as Functional Ingredients: Characterization, Applicability, and Human Health Benefits.

Nowadays, edible materials such as polysaccharides have gained attention due to their valuable attributes, especially gelling property. Polysaccharide-based edible gels (PEGs) can be classified as (i) hydrogels, (ii) oleogels and bigels, (iii) and aerogels, cryogels and xerogels, respectively. PEGs have different characteristics and benefits depending on the functional groups of polysaccharide chains (e.g., carboxylic, sulphonic, amino, methoxyl) and on the preparation method. However, PEGs are found in the incipient phase of research and most studies are related to their preparation, characterization, sustainable raw materials, and applicability. Furthermore, all these aspects are treated separately for each class of PEG, without offering an overview of those already obtained PEGs. The novelty of this manuscript is to offer an overview of the classification, definition, formulation, and characterization of PEGs. Furthermore, the applicability of PEGs in the food sector (e.g., food packaging, improving food profile agent, delivery systems) and in the medical/pharmaceutical sector is also critically discussed. Ultimately, the correlation between PEG consumption and polysaccharides properties for human health (e.g., intestinal microecology, “bridge effect” in obesity, gut microbiota) are critically discussed for the first time. Bigels may be valuable for use as ink for 3D food printing in personalized diets for human health treatment. PEGs have a significant role in developing smart materials as both ingredients and coatings and methods, and techniques for exploring PEGs are essential. PEGs as carriers of bioactive compounds have a demonstrated effect on obesity. All the physical, chemical, and biological interactions among PEGs and other organic and inorganic structures should be investigated.

Formation mechanism of binary complex based on β-lactoglobulin and propylene glycol alginate with different molecular weights: Structural characterization and delivery of curcumin.

The complexation of protein and polysaccharide has shown considerable potential for the encapsulation of functional food components. In this work, propylene glycol alginate (PGA) molecules with different molecular weights (100, 500, and 2,000 kDa) were prepared through H2O2 oxidation, which were further combined with β-lactoglobulin nanoparticles (β-lgNPs) to form PGA-β-lgNPs complexes for the delivery of curcumin (Cur). Results showed that the depolymerization of PGA molecule was resulted from the breakage of glycosidic bonds in the main chain, and the depolymerization rate of PGA molecule depended on the reaction time, temperature, solution pH and H2O2 concentration. As the increasing molecular weight of PGA, the particle size, zeta-potential and turbidity of the complexes were obviously increased. The formation of PGA/β-lgNPs complexes was mainly driven by non-covalent interaction, including electrostatic gravitational interaction, hydrogen bonding and hydrophobic effect. Interestingly, the difference in the molecular weight of PGA also led to significantly differences in the micro-morphology of the complexes, as PGA with a high molecular weight (2,000 kDa) generated the formation of a “fruit-tree” shaped structure, whereas PGA with relatively low molecular weight (100 and 500 kDa) led to spherical particles with a “core-shell” structure. In addition, the incorporation of PGA molecules into β-lgNPs dispersion also contributed to the improvement in the encapsulation efficiency of Cur as well as physicochemical stability of β-lgNPs, and PGA with a higher molecular weight was confirmed with a better effect. Findings in the current work may help to further understand the effect of molecular weight of polysaccharide on the physical and structural properties as well as effectiveness as delivery systems of polysaccharide-protein complexes, providing for the possibility for the design and development of more efficient carriers for bioactive compounds in food system.

Electrosprayed Agar Nanocapsules as Edible Carriers of Bioactive Compounds.

Electrosprayed agar nanocapsules were developed using an acetic acid solution as solvent. The role of solution properties (viscosity, surface tension, and conductivity) in the formation of agar particles was assessed, together with the effect of both agar and acetic acid concentrations on the size and morphology of the resulting particles. Agar solutions with a concentration below 10% w/v were not suitable for electrospraying. Furthermore, the agar–acetic acid ratio was also critical for the formation of agar nanostructures (with an optimum ratio of 1:2). A decrease in particle size was also observed when decreasing agar concentration, with particle diameter values ranging between 50 and 400 nm. Moreover, the suitability of the electrosprayed agar nanocapsules as carriers for a model bioactive compound, chlorophyllin sodium copper salt (CHL), was also evaluated. The release profile of encapsulated CHL, with an estimated encapsulation efficiency of around 40%, was carried out in food simulants with different hydrophilicity (10% v/v and 50% v/v ethanol). While the release of the bioactive was negligible in the hydrophilic food simulant, an initial burst release followed by a slower sustained release was observed when the capsules were immersed in 50% ethanol solution. The results open up a broad range of possibilities that deserve further exploration related to the use of these edible polysaccharide-based nanocapsules.

Micro and nanoencapsulation of bioactive compounds for agri-food applications: A review

Bioactive compounds (BCs) extracted from plants have been under study since ancient times due to their outstanding features such as antioxidant, anticancer, anti-inflammatory, and antimicrobial properties. This has led to the development of various extraction techniques, which are classified as conventional (e.g., Soxhlet extraction, maceration, and hydrodistillation) and non-conventional (e.g., ultrasound-assisted extraction, ohmic extraction, supercritical fluid extraction), both seeking high yields and recovery effectiveness. However, these compounds have an important disadvantage, as they are very susceptible to degradation when exposed to heat, light, and humidity, among other factors. Micro and nanoencapsulation can protect the BCs from these factors allowing their controlled release, favoring their application in this manner. To build these systems several techniques and materials are used, and they must be properly selected as they directly influence their functionality and structural characteristics. Recently, micro and nanostructures have also been explored as carriers for BCs with the aim of combating microbial attacks on crops and extending the food products shelf life. This review covers relevant and updated information on BCs from plants, describing and discussing different extraction techniques and encapsulation processes. It also presents an updated summary about the most frequently used wall materials for encapsulating BCs. There is a review of the advantages that micro and nano encapsulation of BCs from plants can provide, showing that their design can improve their properties, which represents an excellent alternative to potentiate future applications that cover needs in several areas, mainly in the agri-food industry.

Application of Functional and Edible Coatings and Films as Promising Strategies for Developing Dairy Functional Products—A Review on Yoghurt Case

Edible coatings and films appear to be a very promising strategy for delivering bioactive compounds and probiotics in food systems when direct incorporation/inoculation is not an option. The production of dairy products has undergone radical modifications thanks to nanotechnology. Despite being a relatively new occurrence in the dairy sector, nanotechnology has quickly become a popular means of increasing the bioavailability and favorable health effects of a variety of bioactive components. The present review describes, in detail, the various processes being practiced worldwide for yoghurt preparation, microencapsulation, and nanotechnology-based approaches for preserving and/or enriching yoghurt with biologically, and its effect on health and in treating various diseases. In the case of yoghurt, as a perfect medium for functional ingredients supplementation, different gums (e.g., alginate, xanthan gum, and gum arabic), alone or in combination with maltodextrin, seem to be excellent coatings materials to encapsulate functional ingredients. Edible coatings and films are ideal carriers of bioactive compounds, such as antioxidants, antimicrobials, flavors, and probiotics, to improve the quality of dairy food products. Yoghurt is regarded as a functional superfood with a variety of health benefits, especially with a high importance for women’s health, as a probiotic. Consumption of yoghurt with certain types of probiotic strains which contain γ-linolenic acid or PUFA can help solve healthy problems or alleviate different symptoms, and this review will be shed light on the latest studies that have focused on the impact of functional yoghurt on women’s health. Recently, it has been discovered that fermented milk products effectively prevent influenza and COVID-19 viruses. Bioactive molecules from yoghurt are quite effective in treating various inflammations, including so-called “cytokine storms” (hypercytokinaemia) caused by COVID-19.

Recent advances on food‐based applications of monoglyceride oleogels

AbstractMonoglyceride (MG) oleogels are soft matter structures designed to mimic the functionality of fats while maintaining a lipid profile comparable to that of edible oils. These novel fat materials have been mainly investigated as ingredients to reduce saturated fats and eliminate trans fats in the production of several foods, such as spreadables, bakeries, confectioneries, and meat products among others. Due to the versatility that oleogels offer, other relevant technological functionalities as well as the development of health‐promoting systems have been the subject of extensive research. MG oleogels have been explored as oil migration inhibitors, emulsion stabilizers, lipid oxidation stability enhancers, and even as 3D printing materials. Among the most recent applications are the use of MG oleogels as carriers of bioactive compounds as well as the development of systems able to modulate lipid digestion. This review exclusively focuses on the advances over the last decade in technological and nutritional applications of MG oleogels and MG oleogel‐based systems, outlining the most significant findings and conclusions from the literature, as well as challenges and trends for future studies.

Bioactive zein/chitosan systems loaded with essential oils for food-packaging applications.

There has recently been increased interest in biodegradable and sustainable packaging within the food industry. Biopolymer materials based on renewable biomass can be used as alternatives to conventional plastic packaging. A corn protein, zein, possesses excellent film-forming properties because of its hydrophobic nature. It can be used for making edible films and for producing nanofibrous layers. Combination with polysaccharides like chitosan offers promising prospects for the production of delivery systems for the controlled release of active substances. The current trend is to minimize the content of chemical additives; thus essential oils are suitable alternatives to synthetic antimicrobials. This study aimed to develop various zein/chitosan-based film-forming solutions, films, and coatings with antimicrobial substances to prepare active food packaging. Thymol and three essential oils (thyme, cinnamon, oregano) were applied as bioactive ingredients against bacteria, yeasts, and fungi. The incorporation of these natural active compounds led to a decrease in particle size in most film-forming solutions and a reduction of zeta potential compared to controls. Release of the bioactive compound into an aqueous environment was proved by antimicrobial test. A zein/chitosan-based coating with thymol was applied on fresh strawberries. Microbiological analysis over 10 days confirmed the efficient control of bacterial and fungal growth. Zein/chitosan (7:1) systems are suitable as bioactive compound carriers to make barriers and to prevent moisture loss, ensuring microbial food quality and prolonging the shelf life of fruits. These systems can serve as sustainable active food packaging. © 2022 Society of Chemical Industry.