Carpel Wall Research Articles

Comparative analysis of floral transition and floral organ formation in two contrasting species: Disocactus speciosus and D. eichlamii (Cactaceae)

Key messageContrasting morphologies in Disocactus are the result of differential development of the vegetative and floral tissue where intercalary growth is involved, resulting in a complex structure, the floral axis.Species from the Cactaceae bear adaptations related with their growth in environments under hydric stress. These adaptations have translated into the reduction and modification of various structures such as leaves, stems, lateral branches, roots and the structuring of flowers in a so-called flower-shoot. While cacti flowers and fruits have a consistent structure with showy hermaphrodite or unisexual flowers that produce a fruit called cactidium, the developmental dynamics of vegetative and reproductive tissues comprising the reproductive unit have only been inferred through the analysis of pre-anthetic buds. Here we present a comparative analysis of two developmental series covering the early stages of flower formation and organ differentiation in Disocactus speciosus and Disocactus eichlamii, which have contrasting floral morphologies. We observe that within the areole, a shoot apical meristem commences to grow upward, producing lateral leaves with a spiral arrangement, rapidly transitioning to a floral meristem. The floral meristem produces tepal primordia and a staminal ring meristem from which numerous or few stamens develop in a centrifugal manner in D. speciosus and D. eichlamii, respectively. Also, the inferior ovary derives from the floral meristem flattening and an upward growth of the surrounding tissue of the underlying stem, producing the pericarpel. This structure is novel to cacti and lacks a clear anatomical delimitation with the carpel wall. Here, we present a first study that documents the early processes taking place during initial meristem determination related to pericarpel development and early floral organ formation in cacti until the establishment of mature floral organs.

Serial Section-Based Three-Dimensional Reconstruction of Anaxagorea (Annonaceae) Carpel Vasculature and Implications for the Morphological Relationship between the Carpel and the Ovule.

Elucidating the origin of flowers has been a challenge in botany for a long time. One of the central questions surrounding the origin of flowers is how to interpret the carpel, especially the relationship between the phyllome part (carpel wall) and the ovule. Recently, consensus favors the carpel originating from the fusion of an ovule-bearing part and the phyllome part that subtends it. Considering the carpel is a complex organ, the accurate presentation of the anatomical structure of the carpel is necessary for resolving this question. Anaxagorea is the most basal genus in a primitive angiosperm family, Annonaceae. The conspicuous stipe at the base of each carpel makes it an ideal material for exploring the histological relationships among the receptacle, the carpel, and the ovule. In the present study, floral organogenesis and vasculature were delineated in Anaxagorea luzonensis and Anaxagorea javanica, and a three-dimensional model of the carpel vasculature was reconstructed based on serial sections. The results show that in Anaxagorea, the vasculature in the carpel branches in the form of shoots. The radiosymmetrical vasculature pattern is repeatedly presented in the receptacle, the carpel, and the funiculus of the ovule. This provides anatomical evidence of the composite origin of the carpel.

A Peptide Pair Coordinates Regular Ovule Initiation Patterns with Seed Number and Fruit Size

Ovule development in Arabidopsis thaliana involves pattern formation, which ensures that ovules are regularly arranged in the pistils to reduce competition for nutrients and space. Mechanisms underlying pattern formation in plants, such as phyllotaxis, flower morphogenesis, or lateral root initiation, have been extensively studied, and genes controlling the initiation of ovules have been identified. However, the fundamental patterning mechanism that determines the spacing of ovule anlagen within the placenta remained unexplored. Using natural variation analysis combined with quantitative trait locus analysis, we found that the spacing of ovules in the developing gynoecium and fruits is controlled by two secreted peptides, EPFL2 and EPFL9 (also known as Stomagen), and their receptors from the ERECTA (ER) family that act from the carpel wall and the placental tissue. We found that a signaling pathway controlled by EPFL9 acting from the carpel wall through the LRR-receptor kinases ER, ERL1, and ERL2 promotes fruit growth. Regular spacing of ovules depends on EPFL2 expression in the carpel wall and in the inter-ovule spaces, where it acts through ERL1 and ERL2. Loss of EPFL2 signaling results in shorter gynoecia and fruits and irregular spacing of ovules or even ovule twinning. We propose that the EPFL2 signaling module evolved to control the initiation and regular, equidistant spacing of ovule primordia, which may serve to minimize competition between seeds or facilitate equal resource allocation. Together, EPFL2 and EPFL9 help to coordinate ovule patterning and thereby seed number with gynoecium and fruit growth through a set of shared receptors.

Gynoecium structure and development in core Caryophyllales: a matter of proportions

AbstractThis review based on a morphological and developmental perspective reveals a striking diversity in shapes and evolutionary trends in the gynoecium of core Caryophyllales that have affected the number of carpels, the formation of septa and the number of ovules. Two major developmental shifts are responsible for the diversity in gynoecial forms and are linked to the proportional development of carpellary tissue (ovary wall) and the floral apex. (1) Meristic change is caused by an expansion or reduction of the diameter of the floral apex. An expansion leads to polygyny linked with the development of more numerous small carpels; a reduction of space leads to lower carpel numbers, eventually resulting in a single carpel. (2) Different ovary shapes can be recognized at a mid-developmental stage predicting the further development of ovaries. With an equal growth of the ovary wall and floral apex, young ovaries take the shape of a salt-shaker; with more extensive development of the floral apex and delay of the ovary wall, a club-shaped ovary is formed; with faster growth of the ovary wall linked with intercalary expansion and a delayed growth of the floral apex, a (half-) inferior cup-shaped ovary develops. The different growth forms are the results of heterochronic shifts and affect the development of septa and ovule numbers. A common trend in the order implies a weakening and break-up of septa during development, leading to residual apical and basal septa and the shift to free-central and basal placentation. The club-shaped ovary is linked with an almost complete loss of septa and a reduction of the ovule number to one. The salt-shaker shape leads to ovaries with a massive placental column and several ovules. The cup-shaped ovary leads to a shift of ovules away from the floral apex. Developmental flexibility is responsible for a disconnection of carpel wall growth from ovular tissue. Subtle shifts in proportional growth lead to a high diversification of ovaries in core Caryophyllales and the establishment of predictable developmental trends. These trends clearly represent apomorphic tendencies, affecting different families of core Caryophyllales in different degrees. The ancestral gynoecium was probably pentamerous and isomerous with the other floral whorls, with ovules clearly separated from the carpellary wall and inserted on axile placentas corresponding to the central axis of the flower.

Anatomy and development of gynoecium in Tapiscia sinensis Oliv. and its implications for the origin of carpels

Tapiscia sinensis Oliv. (Tapisciaceae) is a rare tree endemic in China. Characteristic of its androdioecy is the coexistence of male and hermaphroditic flowers. Its bisexual flower bears five stamens surrounding the gynoecium, which is composed of a terminal style and an ovary at the base. The style has a bifid stigmata, which is hollow and longer than stamens. The ovary is syncarpous, unilocular, formed by two fused carpels, with a basal or subbasal placenta. Ovule is bitegmic, anatropous, borne on the placenta and supplied by an amphicribral vascular bundle arising directly from receptacle. The carpel wall is supplied by a collateral vascular bundle. The ovule’s position changes from initially inserted on the ovary base to later attached to the middle of the ovary wall due to unequal growth of the embryo sac. Based on the present observation and others, the implications of vascular system in Tapiscia for the evolution of carpel are discussed.

Exogenous Hormones Affect Bt Protein Content of Two Bt Cotton Cultivars

Bacillus thuringiensis (Bt) transgenic cotton (Gossypium hirsutum L.) has been widely planted in Asia. However, efficacy of the Bt protein to kill pests has been inconsistent. Effects of gibberellic acid (GA3) and dimethylpiperidinium chloride (DPC) on boll Bt protein content were investigated on ‘Sikang1’ and ‘Siza3.’ Treatment of DPC increased the Bt protein contents in carpel wall and cotton seed at 10 d after flowering (DAF) and 30 DAF in 2014 and 2015. However, Bt protein contents of the GA3 treatment only at 30 DAF were higher for both cultivars in comparison to the control. To further investigate the mechanism, we found the ability of protein synthesis (indicated by enzyme activities of nitrate reductase [NR], glutamic‐pyruvic transaminase [GPT], and glutamic oxaloacetate transaminase [GOT], as well as contents of total nitrogen, free amino acid, and soluble protein) in bolls increased markedly with the application of DPC for both cultivars. Further analysis showed that there were positive linear correlations between Bt protein content and NR, GPT, and GOT activities and total nitrogen and soluble protein contents (r = 0.925∗∗, r = 0.691∗∗, r = 0.703∗∗, r = 0.682∗, r = 0.693∗∗, respectively) in carpel wall of bolls. Thus, DPC is potentially an effective chemical application to increase boll Bt protein content.Core Ideas Dimethylpiperidinium chloride (DPC) application can bolster boll insect resistance. Significant linear positive correlation between Bt protein content and ability of synthesis the protein was found in boll shell. DPC increases Bt protein content through increasing ability of synthesis the protein.

<p><strong>Floral ontogeny of <em>Illicium Lanceolatum</em> (Schisandraceae) and its implications on carpel homology</strong></p>

There are two competing hypotheses for the origin of carpels. The traditional hypothesis favors a phyllosporous origin and regards a conduplicate carpel as an ancestral form that is the result of longitudinal folding of a leaf bearing ovules along its margins. Alternatively, the carpel formation is interpreted as the result of a fusion between an ovule-bearing branch and its subtending leaf-like structure. Illicium is a member of the Austrobaileyales, which are one of the three ANA lines that diverged before all other extant angiosperms. This genus with apocarpous gynoecium has various ancestral morphological characteristics in terms of carpel, ovule, and floral apex. Although various aspects of Illicium morphology have been previously investigated, many evolutionary characteristics remain poorly understood. In this study, the development of carpel, ovule, and floral apex of I. lanceolatum was studied using LM and SEM. The results showed that the ovule primordium originates in the axillary position between the flower axis and carpel wall. So the carpel of Illicium is a leaf-like structure that encircles the ovule. This kind of carpel favors the carpel as a result of fusion between two parts, ovule-bearing branch and its subtending leaf-like structure.

The morphological relationship between carpels and ovules in angiosperms: pitfalls of morphological interpretation

Carpels and ovules have been differently interpreted over the past two centuries. In this review, some of these interpretations are highlighted, with particular emphasis on the current situation. Ovules are part of and are enclosed in carpels in all living angiosperms. Living angiosperms are monophyletic, and the evolutionary association between ovules and the leaf-like part, the carpel wall, had taken place at or before the time the clade of extant angiosperms was established. From what we know at present, there are no ‘cauline’ ovules in extant angiosperms. Developmentally, carpel walls and ovules are not always synchronous across all extant angiosperms. In early development ovules may be relatively precocious or relatively late compared with carpel walls. They are late in early-diverging angiosperms (ANITA grade, magnoliids, some early-diverging eudicots) but precocious in some more derived groups (e.g. some Caryophyllales and Primulaceae). Carpel primordia have a certain depth in the floral apex, and the entire activated area of a carpel primordium may be several cell layers thick. Thus, the carpel is ‘embedded’ or ‘rooted’ within the remaining floral apex. The parts of a carpel develop at different times in carpel ontogeny and probably evolved at different times on the line leading to the angiosperms, which needs to be considered in interpretations. Carpel development depends on a complex genetic network, which increased stepwise over evolutionary time and contains hundreds of genes revealed in molecular developmental biology. The evolutionary history of such networks in carpel walls and ovules is unlikely to be easily disentangled, as most of these genes are not transcription factors.

Liquidambar (Altingiaceae) and associated insect herbivory from the Miocene of southeastern China

The infructescences and associated leaves of Liquidambar from the middle Miocene Fotan Group, southeastern China, were assigned to a new species, Liquidambar fujianensis sp. nov., based on their long persistent styles, fruit morphological and anatomical characters. The comprehensive anatomical information on the infructescences, including the seeds, inner carpel wall cells and outer fruit tissue cells, were discussed and compared in detail. The infructescences and leaves are considered to belong the same plant and have a close relationship with the modern species Liquidambar formosana. Insect-mediated damage was investigated on the leaves of L. fujianensis sp. nov., and five principal types of damage, hole feeding, margin feeding, surface feeding, skeletonization, and galling, were categorized. The damage richness indicates that our fossils were distributed in a region with a warm and wet climate, and we inferred that the possible phytophagous insect as herbivore culprits against L. fujianensis sp. nov. of the middle Miocene Fotan flora belong to the insect orders Coleoptera, Lepidoptera and Hemiptera.

Arabidopsis thaliana MLO genes are expressed in discrete domains during reproductive development.

MLOs in Plant Reproduction. The MILDEW RESISTANCE LOCUS-O (MLO) protein family, comprised of 15 members, plays roles in diverse cell-cell communication processes such as powdery mildew susceptibility, root thigmomorphogenesis, and pollen tube reception. The NORTIA (NTA, AtMLO7) gene is expressed in the synergid cells of the female gametophyte where it functions in intercellular communication with the pollen tube. Discrepancies between previously published promoter::GUS and promoter::gene-GUS constructs expression patterns led us to explore the regulation of NTA expression. Here we found via NTApro::gNTA-GUS truncations that sequences within the NTA gene negatively regulate its expression in the stomata and carpel walls. This led to the hypothesis that other MLO family members may also have additional regulatory sequences within the gene. MLOpro::gMLO-GUS constructs were examined for each family member focusing specifically on flowers in order to determine whether other MLOs could play a role in reproductive cell-cell communication. Notably, several MLOs were expressed in the pollen, in the stigma, in the pollinated style, and in the synergids and central cell. These findings indicate that other MLOs in addition to NTA could play a role in reproduction. Previous studies on the MLO family showed that phylogenetically related MLOs had redundant functions in powdery mildew infection and root thigmomorphogenesis; however, MLO expression in reproductive tissues did not strictly follow phylogenetic relationships, indicating that MLOs from different evolutionary origins may have been recruited for function in sexual reproduction.

Impact of Dysdercus koenigii Fabricius (Hemiptera: Pyrrhcoridae) density-dependent population on agronomic and qualitative characteristics of different transgenic cotton varieties

The cotton stainer, Dysdercus koenigii Fabricius (Hemiptera: Pyrrhcoridae), has become a major threat to transgenic cotton as it causes warts on the internal carpel wall of cotton boll, severe lint staining, lint locks, and lint lesions. Thus, keeping in view the importance of this pest on cotton, in the present study, screening of 13 transgenic cotton genotypes was performed and the population of D. koenigii was determined on these genotypes during 2012–13. Furthermore, among these genotypes, a high yielding advanced cultivar (FH-114) was selected for further experiments. A number of five different densities of D. koenigii (5, 10, 15, 20, and 25) at adult stage with well-developed proboscis were released in the cages along with a control treatment. Cotton genotypes FH-312, FH-2073, FH-Lalazar, FH-142, and MNH-886 possessed minimum population (1.33 D. koenigii per plant) compared to FH-324 and FH-444 (6.0 D. koenigii per plant). The number of bolls per plant and boll weight decreased as a result of increased densities. The increased density of D. koenigii resulted in fewer bolls per plant (12.1 bolls), reduced boll weight (2.1 g), germination (39.1%), ginning out turn (38.3%), staple length (27.8 mm), and staple fineness (4.0 μg/in.) when compared with un-infested plants (30.6, 3.2 g, 77.3%, 41.5%, 28.8 mm, and 4.4 μg/in.), respectively. Correlation analysis revealed that bolls per plant, boll weight, germination, ginning out turn, and staple fineness resulted in negative and significant correlation with density of D. koenigii with r-values of −0.95, −0.98, −0.98, −0.8, and −0.85, respectively. Coefficient of determination (R2) demonstrated that bolls per plant, boll weight, germination, ginning out turn, staple length, and staple fineness contributed with 91, 96, 96, 79, 43 and 73%, respectively, to the total variability at different densities of D. koenigii. Our findings demonstrated that D. koenigii has become potential major pest and causes quantitative and qualitative losses to transgenic cotton, hence, there is a need to develop appropriate control measures for controlling its population to avoid further losses.

An INDEHISCENT-Controlled Auxin Response Specifies the Separation Layer in Early Arabidopsis Fruit

Seed dispersal is an important moment in the life cycle of a plant species. In Arabidopsis thaliana, it is dependent on transcription factor INDEHISCENT (IND)-mediated specification of a separation layer in the dehiscence zone found in the margin between the valves (carpel walls) and the central replum of the developing fruit. It was proposed that IND specifies the separation layer by inducing a local auxin minimum at late stages of fruit development. Here we show that morphological differences between the ind mutant and wild-type fruit already arise at early stages of fruit development, coinciding with strong IND expression in the valve margin. We show that IND-reduced PIN-FORMED3 (PIN3) auxin efflux carrier abundance leads to an increased auxin response in the valve margin during early fruit development, and that the concomitant cell divisions that form the dehiscence zone are lacking in ind mutant fruit. Moreover, IND promoter-driven ectopic expression of the AGC kinases PINOID (PID) and WAG2 induced indehiscence by expelling auxin from the valve margin at stages 14–16 of fruit development through increased PIN3 abundance. Our results show that IND, besides its role at late stages of Arabidopsis fruit development, functions at early stages to facilitate the auxin-triggered cell divisions that form the dehiscence zone.

Behavioural and chemical mechanisms of plant‐mediated deterrence and attraction among frugivorous insects

1. Herbivory often induces systemic plant responses that affect the host choice of subsequent herbivores, either deterring or attracting them, with implications for the performance of both herbivore and host plant. Combining measures of herbivore movement and consumption can efficiently provide insights into the induced plant responses that are most important for determining choice behaviour.2. The preferences of two frugivorous stink bug species, Nezara viridula and Euschistus servus between cotton plants left undamaged or damaged by Helicoverpa zea and Heliothis virescens larvae were investigated. A novel consumer movement model was used to investigate if attraction rates or leaving rates determined preferences. Stink bug consumption rates were measured using salivary sheath flanges. Finally, the systemic induction of selected phenolic‐based and terpenoid secondary metabolites were measured from heliothine herbivory on developing cotton bolls, to investigate if they explained stink bug feeding responses.3. Heliothine herbivory did not affect the N. viridula feeding preference. However, we found opposing effects of H. zea and H. virescens herbivory on the behaviour of E. servus. Avoidance of H. zea‐damaged plants is not obviously related to phenolic or terpenoid induction in cotton bolls; whereas a preference for H. virescens‐damaged plants may be related to reductions in chlorogenic acid in boll carpel walls.4. The present results highlight the inferential power of measuring both consumer movement and consumption in preference experiments and combining behavioural responses with phytochemical responses. Furthermore, while plant‐mediated interactions among herbivorous insects are well studied, interactions among frugivorous species specifically have been poorly documented.

Stylet Penetration Estimates for a Suite of Phytophagous Hemipteran Pests of Row Crops.

Members of the Miridae (Lygus lineolaris Palisot de Beauvois and Pseudatomoscelis seriatus Reuter) and Pentatomidae (Acrosternum hilare Say, Euschistus servus (Say), Euschistus tristigmus (Say), Euschistus quadrator Rolston, Oebalus pugnax (F.), Piezodorus guildinii (Westwood), and Thyanta custator accerra McAtee) comprise a piercing-sucking insect complex that continues to plague multiple crops, including cotton. All these species have been associated with pathogen transmission. Breaching of boll carpel walls facilitates introduction of pathogens, and it is unknown whether stylets of these pests can fully penetrate carpel walls. Thus, stylet penetration estimates are needed and have been the focus of the present work. Stylet penetration estimates for L. lineolaris were significantly deeper than P. seriatus. Among the Pentatomidae, highest mean penetration was estimated for E. servus followed by A. hilare, yet A. hilare possessed a longer rostrum. Similarly, O. pugnax showed deeper penetration estimates than P. guildinii yet P. guildinii possessed a longer rostrum. Thus, rostrum length should not be equated to penetration potential. Pseudatomoscelis seriatus and L. lineolaris both infest early-season cotton, and the ranges of observed penetration indicate these insects, as well as the Pentatomidae, can breach the walls of critical pinhead squares and smaller bolls. The insects addressed herein affect a myriad of crops globally, and penetration estimates allow identification of growth stages susceptible to feeding and disease transmission.

First record of bacteriomorphic organisms in platanoid infructescences from the Campanian Kundur locality, Amur region

Bacteriomorphic organisms found in fruits of capitate infructescences in Kunduricarpus Kodrul, N. Maslova, Tekleva et Golovneva, Platanaceae, are described. Three types of carpel damage have been detected: (1) evidence of penetration of microorganisms in the walls of the carpel, (2) three-dimensional structures (isolated and in chains) rounded in section, which fill the inner space of the carpel, and (3) imprints of these structures on the inner surface of the carpel wall cuticle. The possible nature of the microorganisms is discussed.

Megasporocyte formation in Pisum sativum L. against the back ground of bud development

Megasporocyte formation in <em>Pisum sativum</em> L. takes place at the stages of bud development, when the vexillum surpasses the lower androecium whorl slightly at the beginning, and markedly in further stages. Under the epidermis of an ovule, a multicellular archesporium is formed. Mitotic division of these cells gives rise to a two-layered parietal tissue and to a group of megaspore mother cells (MMCs). The tetrad is formed from one megasporocyte. In the bud development of <em>Pisum sativum</em> the carpel walls accrete to each other relatively early.

The phytomelanin layer in traditional members of Bidens and Coreopsis and phylogeny of the Coreopsideae (Compositae)

The phytomelanin layer on the pericarp of cypselae (achenes) of many members of traditional Bidens and Coreopsis, both considered polyphyletic, was studied with the help of scanning electron (SEM) and light (LM) microscopes. It is found to be more prominent in taxa kept within Bidens than in Coreopsis. The black ‘peg‐like’ phytomelanin found in traditional members of Bidens is also found in some members of Coreopsis. Some traditional members of Coreopsis display distinctive pericarp morphology but lack phytomelanin. The pericarp in Bidens is striated, i.e. it is interrupted by longitudinal bands of parenchyma through which the embryo emerges during seed germination. No striation was found in cypselae of traditional Coreopsis. Emergence of the seed in taxa with this type of pericarp morphology is observed to be by rupturing the carpel wall along the sutures. Characteristic morphology of the phytomelanin layer and other cellular secretions on the pericarp in representative species of these genera and segregates as well as the probable adaptive value of this layer and that of the parenchyma is discussed. Coreopsis sect. Tuckermannia (Nutt.) Blake, C. sect. Pugiopappus (A. Gray) Blake, and C. sect. Euleptosyne (A. Gray) Blake, are elevated to the genus Leptosyne DC., while Coreopsis sect. Electra (DC.) Blake is returned to Electra DC. A key to the segregate genera and the remaining sections of Coreopsis as well as new combinations and synonyms are provided.

Single and Multiple In-Season Measurements as Indicators of At-Harvest Cotton Boll Damage Caused by Verde Plant Bug (Hemiptera: Miridae)

The ability to monitor verde plant bug, Creontiades signatus Distant (Hemiptera: Miridae), and the progression of cotton, Gossypium hirsutum L., boll responses to feeding and associated cotton boll rot provided opportunity to assess if single in-season measurements had value in evaluating at-harvest damage to bolls and if multiple in-season measurements enhanced their combined use. One in-season verde plant bug density measurement, three in-season plant injury measurements, and two at-harvest damage measurements were taken in 15 cotton fields in South Texas, 2010. Linear regression selected two measurements as potentially useful indicators of at-harvest damage: verde plant bug density (adjusted r2 = 0.68; P = 0.0004) and internal boll injury of the carpel wall (adjusted r2 = 0.72; P = 0.004). Considering use of multiple measurements, a stepwise multiple regression of the four in-season measurements selected a univariate model (verde plant bug density) using a 0.15 selection criterion (adjusted r2 = 0.74; P = 0.0002) and a bivariate model (verde plant bug density-internal boll injury) using a 0.25 selection criterion (adjusted r2 = 0.76; P = 0.0007) as indicators of at-harvest damage. In a validation using cultivar and water regime treatments experiencing low verde plant bug pressure in 2011 and 2012, the bivariate model performed better than models using verde plant bug density or internal boll injury separately. Overall, verde plant bug damaging cotton bolls exemplified the benefits of using multiple in-season measurements in pest monitoring programs, under the challenging situation when at-harvest damage results from a sequence of plant responses initiated by in-season insect feeding.

Flowers and inflorescences of the seagrass Posidonia (Posidoniaceae, Alismatales)

The predominantly aquatic order Alismatales displays a highly variable flower groundplan associated with a diverse range of developmental patterns. We present the first detailed description of flower anatomy and development in Posidonia, the sole genus of the seagrass family Posidoniaceae. Existing accounts provide conflicting interpretations of floral and inflorescence structure, so this investigation is important in clarifying morphological evolution within this early-divergent monocot order. • We investigated two species of Posidonia using light microscopy and scanning electron microscopy. Our observations are interpreted in the framework of a recent molecular phylogeny. • Partial inflorescences are bracteate spikes, which are arranged into a botryoid or a panicle. The flowers are perianthless. The gynoecium is monomerous with the ventral carpel side oriented abaxially. The carpel contains a single pendent bitegmic ovule with a nucellus and long chalaza, both extending along the carpel wall. The ovule develops an integumentary outgrowth. Each flower is supplied by a vascular bundle, whereas the flower-subtending bracts are nonvascularized. • Our data support a racemose interpretation for the partial inflorescence of Posidonia and the presence of flower-subtending bracts. In common with some other Alismatales, Posidonia has simultaneous development of the flower and its subtending bract and loss of the bract vascular supply accompanied by innervation of the flower by a single vascular strand. The unusual carpel orientation could be an evolutionary reduction of a formerly tricarpellate gynoecium. The ovule of Posidonia is campylotropous and unusual within Alismatales in possessing an integumentary outgrowth.

The feeding preferences of Spodoptera frugiperda (J. E. SMITH) (Lepidoptera: Noctuidae) on cotton plant varieties

This work evaluated the attractiveness and the non-preference for feeding of newly hatched fall armyworm larvae on the cotton plant parts and different varieties used in the study. The trials were performed at 27 ± 1oC, a 70% ± 10% relative humidity and a 14h photoperiod. Leaves, bracts, squares and carpel walls of the BRS Itamarati-90 variety and leaves of Fibermax-966, Fibermax-977, DeltaOpal, DeltaPenta, BRS Acala-90, Coodetec-408, Coodetec-409, Coodetec-410, BRS-Cedro, BRS-Ipe, BRS- Aroeira, IPR-96, IPR-120, BRS-Araca, IAC-24 and BRS Itamarati-90 varieties were used in attractiveness, multiple-choice and confinement (no-choice) non-preference feeding trials. Twenty larvae were released per petri dish test (arena system) with 10 repetitions. Attractiveness trials were evaluated by counting feeding caterpillars over 60 min. and by measuring non-preference at 24h. Leaves were the most attractive item and were preferred for feeding. In the multiple-choice arena trials, Coodetec-410 was the most attractive variety, and BRS Acala-90, Fibermax-966 and DeltaPenta were the least attractive to fall armyworm larvae. In the non-preference trial, BRS-Araca was the variety favored for feeding. BRS-Cedro, BRS Itamarati-90, DeltaPenta, Coodetec-408 and BRS-Aroeira were the least-favored varieties. In the 60 min. attractiveness trials, 46 min. proved to be the most suitable time for evaluating the attractiveness of cotton plants to newly hatched fall armyworm larvae.