Carboxylic Substituents Research Articles

Synthesis, crystal structure and Hirshfeld surface analysis of a new copper(II) complex based on diethyl 2,2'-(4H-1,2,4-triazole-3,5-di-yl)di-acetate.

The title compound, bis-[μ-2,2'-(4H-1,2,4-triazole-3,5-di-yl)di-acetato]-bis-[di-aqua-copper(II)] dihydrate, [Cu2(C6H5N3O4)2(H2O)4]·2H2O, is a dinuclear octa-hedral CuII triazole-based complex. The central copper atoms are hexa-coordinated by two nitro-gen atoms in the equatorial positions, two equatorial oxygen atoms of two carboxyl-ate substituents in position 3 and 5 of the 1,2,4-triazole ring, and two axial oxygen atoms of two water mol-ecules. Two additional solvent water mol-ecules are linked to the title mol-ecule by O-H⋯N and O⋯H-O hydrogen bonds. The crystal structure is built up from the parallel packing of discrete supra-molecular chains running along the a-axis direction. Hirshfeld surface analysis suggests that the most important contributions to the surface contacts are from H⋯O/O⋯H (53.5%), H⋯H (28.1%), O⋯O (6.3%) and H⋯C/C⋯H (6.2%) inter-actions. The crystal studied was twinned by a twofold rotation around [100].

Stress-Relieving Carboxylated Polythiophene/Single-Walled Carbon Nanotube Conductive Layer for Stable Silicon Microparticle Lithium-Ion Battery Anodes

Silicon is one of the most promising anode materials for next generation Lithium ion batteries (LIBs) on account of its ultrahigh specific capacity (4200 mAh g-1) and relatively low working potential of 0.3 V (vs. Li+/Li). However, practical commercial implementation of silicon poses a great challenge due to technical difficulties such as low conductivity (10-5-10-3 S cm-1), low initial Coulombic efficiency (50-80%) and stress-induced fracture, along with SEI accumulation due to severe volume changes (~400%) inherent in silicon-based anodes.To address these challenges and advance the next generation of LIBs, we present poly[3-(potassium-4-butanoate)thiophene] (PPBT) and single-walled carbon nanotube (SWNT) coated silicon microparticles (Si MPs) (PPBT/SWNT@Si MPs) as active materials for highly stable Si-based anodes for LIB systems. The water-soluble conjugated polymer, PPBT, was selected for its ability to serve as an ion and electron conducting physical/chemical linker (10-5 S cm-1 vs. PVDF; ~ 10-8 S cm-1) to the surface of various high capacity anode active materials systems. In consideration of current practical requirements for Si-based anode materials, Si MPs were selected as starting materials due to their lower surface area than the nanoscale analogs, a characteristic that can further improve LIB bulk capacity. In addition, Si MPs are known to have high initial Coulombic efficiency and industrial compatibility. With the help of PPBT, which facilitates unraveling of entangled single-walled carbon nanotubes, SWNTs were successfully attached to the surface of the active materials. PPBT carboxylate substituents were found to be chemically bound to the Si MP surface, providing an electrochemically conductive environment in intimate contact with the 1D SWNTs and Si MPs.Due to facilitated ion/electron transport kinetics, PPBT/SWNT@SiMP anodes exhibited superior capacity retention and higher reversible capacities, even at a high current density of 8 A g-1, compared to bare Si MP anodes. Improved initial Coulombic efficiency and stable cycling performance over 300 cycles were achieved. In situ Raman spectroscopy was employed to investigate the evolution of stress on the SWNTs during lithiation/delithiation, which elucidated the mechanism underlying the enhancement in PPBT/SWNT@Si MP anode cycling performance. The single-walled carbon nanotubes within the PPBT/SWNT@Si MP anodes consistently exhibited reversible stress recovery and 45 % less tensile stress variation after the 10th cycle than SWNT@Si MP control anodes fabricated by direct mixing of the microparticles with SWNTs to create SWNT@Si MPs.Combined, the results suggest that a well-developed conductive interface can enhance the rate performance, and improve electrode stability and Coulombic efficiency. Furthermore, the PPBT/SWNT coating directly bound to the Si MP surface provides for efficient stress relaxation of Si-based electrodes, resulting in reversible lithiation/delithiation, low electrode resistance, and reduced SEI layer formation.

Modeling hydration of graphene oxide (GO) – Does size matter?

The biomedical applications of graphene-based materials become one of hot scientific and technological topics in the last few years. Flake graphene oxide (GO) is considered as one of the promising materials for biomedical use due to a number of specific properties, in particular in design of advanced drug delivery systems (DDS). The key factor in the formation of non-covalently bonded complexes for drug transport is the strength of non-covalent interactions of the carrier with both the drug and the environment. In the current work, we have focused on molecular modeling of solvation of zigzag-edged graphene oxide, functionalized with hydroxyl and carboxyl substituents. The hydration was determined from the magnitude of weak intermolecular interactions of GO with one or two water molecules. Our goal was to establish the dependence of the degree and type of functionalization, as well as the size of graphene flakes and the position of hydrophilic substituents on the number and strength of H-bonds. All calculations were performed using density functional theory (DFT) at the B3LYPD3BJ/6-311++G** level. The effect of water solvent was established using an explicit (discrete) model of solvent.

Anthranilic Acid: A Versatile Monomer for the Design of Functional Conducting Polymer Composites

Polyaniline has been utilized in various applications, yet its widespread adoption has often been impeded by challenges. Composite systems have been proposed as a means of mitigating some of these limitations, and anthranilic acid (2-aminobenzoic acid) has emerged as a possible moderator for use in co-polymer systems. It offers improved solubility and retention of electroactivity in neutral and alkaline media, and, significantly, it can also bestow chemical functionality through its carboxylic acid substituent, which can greatly ease post-polymer modification. The benefits of using anthranilic acid (as a homopolymer or copolymer) have been demonstrated in applications including corrosion protection, memory devices, photovoltaics, and biosensors. Moreover, this polymer has been used as a versatile framework for the sequestration of metal ions for water treatment, and, critically, these same mechanisms serve as a facile route for the production of catalytic metallic nanoparticles. However, the widespread adoption of polyanthranilic acid has been limited, and the aim of the present narrative review is to revisit the early promise of anthranilic acid and assess its potential future use within modern smart materials. A critical evaluation of its properties is presented, and its versatility as both a monomer and a polymer across a spectrum of applications is highlighted.

Manipulation of the Self‐Assembly Morphology by Side‐Chain Engineering of Quinoxaline‐Substituted Organic Photothermal Molecules for Highly Efficient Solar‐Thermal Conversion and Applications

AbstractOrganic photothermal materials have attracted increasing attention because of their structural diversity, flexibility, and compatibility. However, their energy conversion efficiency is limited owing to the narrow absorption spectrum, strong reflection/transmittance, and insufficient nonradiative decay. In this study, two quinoxaline‐based D–A‐D–A‐D‐type molecules with ethyl (BQE) or carboxylate (BQC) substituents were synthesized. Strong intramolecular charge transfer provided both molecules with a broad absorption range of 350–1000 nm. In addition, the high reorganization energy and weak molecular packing of BQE resulted in efficient nonradiative decay. More importantly, the self‐assembly of BQE leads to a textured surface and enhances the light‐trapping efficiency with significantly reduced light reflection/transmittance. Consequently, BQE achieved an impressive solar‐thermal conversion efficiency of 18.16 % under 1.0 kW m−2 irradiation with good photobleaching resistance. Based on this knowledge, the water evaporation rate of 1.2 kg m−2 h−1 was attained for the BQE‐based interfacial evaporation device with an efficiency of 83 % under 1.0 kW m−2 simulated sunlight. Finally, the synergetic integration of solar‐steam and thermoelectric co‐generation devices based on BQE was realized without significantly sacrificing solar‐steam efficiency. This underscores the practical applications of BQE‐based technology in effectively harnessing photothermal energy. This study provides new insights into the molecular design for enhancing light‐trapping management by molecular self‐assembly, paving the way for photothermal‐driven applications of organic photothermal materials.

Manipulation of the Self-Assembly Morphology by Side-Chain Engineering of Quinoxaline-Substituted Organic Photothermal Molecules for Highly Efficient Solar-Thermal Conversion and Applications.

Organic photothermal materials have attracted increasing attention because of their structural diversity, flexibility, and compatibility. However, their energy conversion efficiency is limited owing to the narrow absorption spectrum, strong reflection/transmittance, and insufficient nonradiative decay. In this study, two quinoxaline-based D-A-D-A-D-type molecules with ethyl (BQE) or carboxylate (BQC) substituents were synthesized. Strong intramolecular charge transfer provided both molecules with a broad absorption range of 350-1000 nm. In addition, the high reorganization energy and weak molecular packing of BQE resulted in efficient nonradiative decay. More importantly, the self-assembly of BQE leads to a textured surface and enhances the light-trapping efficiency with significantly reduced light reflection/transmittance. Consequently, BQE achieved an impressive solar-thermal conversion efficiency of 18.16 % under 1.0 kW m-2 irradiation with good photobleaching resistance. Based on this knowledge, the water evaporation rate of 1.2 kg m-2 h-1 was attained for the BQE-based interfacial evaporation device with an efficiency of 83 % under 1.0 kW m-2 simulated sunlight. Finally, the synergetic integration of solar-steam and thermoelectric co-generation devices based on BQE was realized without significantly sacrificing solar-steam efficiency. This underscores the practical applications of BQE-based technology in effectively harnessing photothermal energy. This study provides new insights into the molecular design for enhancing light-trapping management by molecular self-assembly, paving the way for photothermal-driven applications of organic photothermal materials.

Characteristics of Microplastic-derived Dissolved Organic Matter(MPDOM) and the Complexation Between MPDOM and Sulfadiazine/Cu2

Microplastic-derived dissolved organic matter(MPDOM) during the aging process could be complexed with organic pollutants, heavy metals, and other contaminants and thus affect their migration and transformation. In this study, two types of microplastics, polyethylene terephthalate(PET) and polystyrene(PS), were selected to investigate the spectral properties of MPDOM and their effect on the complexation between MPDOM and sulfadiazine(SDZ)/copper ion(Cu2+) using the fluorescence quenching method, various spectroscopic analysis techniques, and the Ryan-Weber quenching model. The results of UV-vis absorption spectroscopy analysis showed that the molecular weight of the two MPDOMs decreased; the aromaticity and humification increased; and the carboxyl, carbonyl, hydroxyl, and ester substituents on aromatic rings increased after aging. The fluorescence quenching process between MPDOM and SDZ/Cu2+ was static quenching. After quenching, the aromaticity and humification of the two MPDOMs were similar, and the molecular weights were comparable. Combined with three-dimensional fluorescence spectra and parallel factor analysis, two humic-like components and one protein-like component were identified. In addition, the protein-like components of MPDOM reacted preferentially with SDZ and were more sensitive to Cu2+. The results of the Ryan-Weber quenching model revealed that the binding ability of humic-like components to PET-DOM was higher in both SDZ and Cu2+ quenching systems, but the binding ability of MPDOM in the SDZ quenching system was generally stronger than that in the Cu2+ system.

Structure and biochemical characterization of an extradiol 3,4-dihydroxyphenylacetate 2,3-dioxygenase from Acinetobacter baumannii

3,4-Dihydroxyphenylacetate (DHPA) 2,3-dioxygenase (EC 1.13.11.15) from Acinetobacter baumannii (AbDHPAO) is an enzyme that catalyzes the 2,3-extradiol ring-cleavage of DHPA in the p-hydroxyphenylacetate (HPA) degradation pathway. While the biochemical reactions of various DHPAOs have been reported, only structures of DHPAO from Brevibacterium fuscum and their homologs are available. Here, we report the X-ray structure and biochemical characterization of an Fe2+-specific AbDHPAO that shares 12% sequence identity to the enzyme from B. fuscum. The 1.8 Å X-ray structure of apo-AbDHPAO was determined with four subunits per asymmetric unit, consistent with a homotetrameric structure. Interestingly, the αβ-sandwiched fold of the AbDHPAO subunit is different from the dual β-barrel-like motif of the well-characterized B. fuscum DHPAO structures; instead, it is similar to the structures of non-DHPA extradiol dioxygenases from Comamonas sp. and Sphingomonas paucimobilis. Similarly, these extradiol dioxygenases share the same chemistry owing to a conserved 2-His-1-carboxylate catalytic motif. Structure analysis and molecular docking suggested that the Fe2+ cofactor and substrate binding sites consist of the conserved residues His12, His57, and Glu238 forming a 2-His-1-carboxylate motif ligating to Fe2+ and DHPA bound with Fe2+ in an octahedral coordination. In addition to DHPA, AbDHPAO can also use other 3,4-dihydroxyphenylacetate derivatives with different aliphatic carboxylic acid substituents as substrates, albeit with low reactivity. Altogether, this report provides a better understanding of the structure and biochemical properties of AbDHPAO and its homologs, which is advancing further modification of DHPAO in future applications.

Unusual short intramolecular N–H⋅⋅⋅H–C contact and weak intermolecular interactions in two N-(adamantan-1-yl)piperazine carbothioamides: Crystallography, quantum chemical study and in vitro urease inhibitory activity

Crystal structures of two closely related N-(adamantan-1-yl)piperazine carbothioamides have been examined in detail using the Hirshfeld surface, fingerprint analysis, PIXEL energy for molecular dimers and noncovalent interaction (NCI) plots for intermolecular interactions. Both compounds namely, ethyl 4-[(adamantan-1-yl)carbamothioyl]piperazine-1-carboxylate (1) and N-(adamantan-1-yl)-4-(2-methoxyphenyl)piperazine-1-carbothioamide (2) crystallized in the triclinic system with two crystallographically independent molecules in each case. X-ray analysis indicates that the piperazine ring in one of the molecules of 1 exhibits a boat and chair conformation in the other crystallographically independent molecule, while the corresponding ring in 2 adopts a chair conformation. An analysis of the fingerprint plots of the Hirshfeld surface provides a qualitative picture of how carboxylate and methoxyphenyl substituents contribute to stabilizing the crystal packing. Both structures show unusually short intramolecular N–H⋅⋅⋅H–C contact with some geometrical constraints in addition to intramolecular C–H⋅⋅⋅S interactions. The role of intramolecular N–H⋅⋅⋅H–C contact was established with potential energy surface scan and structural optimization. The CLP-PIXEL calculation gives the intermolecular interaction energies for the molecular dimers in these structures. Many dimers in 1 are stabilized by C–H⋅⋅⋅O/S/π interactions, while others are stabilized by short H⋅⋅⋅H contacts. Intermolecular C–H⋅⋅⋅O interactions do not occur in 2. There are, however, intermolecular C–H⋅⋅⋅S/π interactions and short H⋅⋅⋅H contacts in some dimers. We used NCI plots to identify the nature of the observed noncovalent interactions. Compared to the control inhibitor (thiourea), the title compounds have good inhibitory activity against urease in vitro. Molecular docking analysis identifies the key active site residues involved in intermolecular interactions between a small molecule and an enzyme.

Targeting Monoamine Oxidase B for the Treatment of Alzheimer’s and Parkinson’s Diseases Using Novel Inhibitors Identified Using an Integrated Approach of Machine Learning and Computer-Aided Drug Design

Neurological disorders are disorders characterized by progressive loss of neurons leading to disability. Neurotransmitters such as nor-adrenaline, dopamine, and serotonin are partially regulated by the enzyme monoamine oxidase (MAO). Treatments for conditions like Alzheimer’s, Parkinson’s, anxiety, and depression involve the use of MAOIs. To target MAO enzyme inhibition, various scaffolds are prepared and evaluated, including modified coumarins, chromone carboxylic acid substituents, pyridazine derivatives, and indolylmethylamine. The research presented here focuses on combining different computational tools to find new inhibitors of the MAO-B protein. We discovered 5 possible chemical inhibitors using the above computational techniques. We found five molecular inhibitors with high binding affinity using computational methods. These five molecules showed a high binding affinity; they are −10.917, −10.154, −10.223, −10.858, and −9.629 Kcal/mol, respectively. Additionally, the selected inhibitors were further examined by in vitro activity, and their binding affinity was confirmed using an enzyme-based assay. In summary, the computational studies performed here using molecular dynamics and free energy calculations can also be used to design and predict highly potent derivatives as MAO-B inhibitors, and these top inhibitors help in the development of novel drugs for neurological diseases such as Alzheimer’s and Parkinson’s.

Minimization of Acid-Catalyzed Degradation in KinetiSol Processing through HPMCAS Neutralization.

Hypromellose acetate succinate (HPMCAS) is an enteric polymer that has been successfully employed as a carrier in amorphous solid dispersions (ASDs). Deprotonation of succinic acid substituents at intestinal pH levels results in solubilization of the polymer. However, the acidic moieties responsible for favorable pH-dependent solubility can also result in incompatibilities between acid-sensitive drugs and HPMCAS. Solution-state conversion of the carboxylic acid substituents of enteric polymers into carboxylate salts to reduce acid-mediated drug degradation is a demonstrated effective strategy for generating ASDs in enteric polymers. This work aimed to extend the use of a pre-ionized enteric polymer to KinetiSol solvent-free processing to reduce acid- or base-mediated drug degradation during processing. Pre-ionization of HPMCAS was accomplished by reaction with a stoichiometric quantity of sodium carbonate (Na2CO3) delivered as a saturated aqueous solution. The resulting ionized polymer, HPMCAS-Na, was dried thoroughly before processing. Tetrabenazine (TBZ) was chosen as a model drug for its susceptibility to degradation via both acid- and base-catalyzed reaction mechanisms and for its tendency to form a single impurity by these mechanisms. The use of HPMCAS-Na in KinetiSol solid dispersions (KSDs) of TBZ resulted in a 6- to 8-fold reduction of the acid- and base-generated TBZ impurity compared with KSDs formulated with untreated HPMCAS.

Vibrational frequency Analysis, DFT and in Vitro Fungicidal Activity Studies of Biphenyl-4-Carboxylic Acid, 2,4-Difluorobiphenyl and 4-Acetylbiphenyl- A Comparative Study

Comparative spectroscopic investigation of Biphenyl-4-carboxylic acid (BCA), 4-Acetylbiphenyl (ACB) and 2,4-difluorobiphenyl (DFB) are obtained by using Density Functional Theory (DFT) with B3LYP functional at 6-311++G(d, p) basis set. The vibrational assignments have been proposed with aid of the results of Normal Coordinate Analysis (NCA). The effects of carboxyl, acetyl and fluoro substituents on the vibrational frequencies of biphenyl have been investigated and compared. The molecular stability and bond strength was investigated by applying the Natural Bond Orbital (NBO) analysis. The other molecular properties like Mulliken charge analysis, HOMO-LUMO analysis and Molecular Electrostatic Potential (MESP) of the title compounds have been reported. In vitro analysis have been performed with two fungal pathogens Aspergillus niger and Candida albicans using well diffusion method. BCA compound exhibited excellent activity against the Aspergillus niger with zone of inhibition values in the range of 22 and 25 mm in 40 and 80 µl with 10 mg/ml. Molecular docking studies of the most active compound are carried out, and results showed reasonable binding modes in the fungicide active site of phytase protein Fophys and Succinate dehydrogenase (SDH) proteins. A preliminary Structure-Activity Relationship study of the biphenyl derivatives has led to the recognition of some important structural requirements for antifungal activity. Furthermore the fungicide-likeness analysis of BCA, DFB and ACB compounds have been developed to predict its fungicide activity by using fungiPAD webtool.

An amine decorated MOF for direct capture of CO2 from ambient air.

A Zn(II)-based metal-organic framework (MOF) was synthesized by the self-assembly of the dicarboxylate ligand terephthalic acid (TPA), 2-aminoterephthalic acid (NH2-TPA) and N-donor auxiliary ligand 1,4-bis(4-pyridinylmethyl)piperazine (bpmp) using Zn(NO3)2·6H2O under hydrothermal conditions. {[Zn(TPA)0.5(NH2TPA)0.5(bpmp)]·DMF·7H2O}n (framework 1) has an sra topology with a BET surface area of 756 m2 g-1. The microporous nature of the framework is apparent from the significant CO2 adsorption capacities observed at various temperatures: 57 cc g-1 at 283 K, 46 cc g-1 at 293 K, 37 cc g-1 at 303 K, and 30 cc g-1 at 313 K. The considerable CO2 adsorption may be caused by the existence of free carboxylate and amine substituents that interact with the gas molecules and micropores. At room temperature, the activated MOF readily converts CO2 into cyclic carbonates when a suspension of the MOF is bubbled with ambient air and different epoxides under solvent-free conditions. The amine groups located within the pores of the MOF interact with CO2 molecules, enhancing their sorption and conversion to cyclic carbonates. However, due to interpenetration within framework 1, only smaller size epoxides can be accommodated and converted to cyclic carbonates in good yields. Additionally, the effectiveness of the catalyst is further confirmed by the positive outcomes obtained from the hot filtration control test. Grand canonical Monte Carlo (GCMC) molecular simulations were utilized to gain a better understanding of molecular interactions. GCMC results are in line with the experiments. The substantial adsorption of CO2 can be ascribed to the strong intermolecular interactions that occur between the amine groups within the framework and the CO2 molecules.

Mechanochemical preparation of strongly emissive monosubstituted triarylphosphane gold(i) compounds activated by hydrogen bonding driven aggregations.

Gold(i) triarylphosphane compounds are a well-known class of coordination compounds displaying from mild to strong emissive properties. Mechanochemical approaches to the preparation, spectroscopic characterization, X-ray diffraction structural determination, and photophysical studies of green emissive neutral linear monophosphane or neutral pseudo-T-shaped or cationic bis-phosphane gold(i) compounds, are herein discussed. The mechanochemical approach to the preparation of gold(i) derivatives was particularly successful for ligands bearing the carboxylic group, while the preparation with esterified ligands yields better results with solvent-mediated methods. The introduction of carboxyl or ester substituents in one aryl group favors the ligand-centered emissions. The analysis of the origin of the emissions was elucidated on the basis of DFT calculations, addressing the emissive behavior to ligand-centered excited states, strongly affected by supramolecular reversible hydrogen bonding aggregation. The study indicates that the ligand with the carboxylic group is particularly suitable for the mechanochemical preparation of emissive gold(i) complexes for material science applications.

Flavonol dioxygenation catalysed by cobalt(II) complexes supported with 3N(COO) and 4N donor ligands: a comparative study to assess the carboxylate effects on quercetin 2,4-dioxygenase-like reactivity.

Two new cobalt(II)-acetato complexes, [CoII(L3NCOO)(OAc)]·0.5H2O (1OAc·0.5H2O) and [CoII(L4N)(OAc)](PF6) (2OAc(PF6)), were synthesised using ligands L3NCOO- (Li+L3NCOO- = lithium 2-(benzyl((6'-methyl-[2,2'-bipyridin]-6-yl)methyl)amino)acetate) and L4N (N-benzyl-1-(6'-methyl-[2,2'-bipyridin]-6-yl)-N-(pyridin-2-ylmethyl)methanamine), respectively, to mimic the functional activity of cobalt(II)-quercetin-2,4-dioxygenase (CoII-2,4-QD). Additionally, Co(II)-flavonolato ternary complexes, [CoII(L3NCOO)(fla)]·H2O (1fla·H2O) and [CoII(L4N)(fla)](PF6) (2fla(PF6)), were synthesised as enzyme-substrate models. All four complexes were thoroughly characterised by elemental analyses and spectroscopic methods. Structural characterisation was performed for 1OAc·0.5H2O, 2OAc(PF6)·CH2Cl2 and 2fla+ with a perchlorate counter anion, 2fla(ClO4)·1.5H2O. Furthermore, density functional theory (DFT) calculations, time-dependent DFT (TD-DFT) and molecular orbital (MO) analysis were performed for the flavonolato adducts 1fla and 2fla+. The catalytic activities of complexes 1OAc·0.5H2O and 2OAc(PF6) in the oxygenative degradation of flavonol (multiple-turnover reactions) were investigated at 70 °C in DMF to determine the effect of the carboxylate substituent over a pyridyl donor residue on reactivity. Complex 1OAc·0.5H2O showed a higher catalytic rate than complex 2OAc(PF6). The same reactivity order was observed for single-turnover dioxygenation reactions with ternary complexes (1fla > 2fla+). The formation constants (Kf) of 1fla and 2fla+ species are comparable, implying that catalyst-substrate adduct formation occurs in similar amounts for both catalytic reactions. Therefore, the Kf values have a similar impact on reactivities. However, the oxidation potential of the bound fla-/fla˙ couple in 1fla is considerably lower than that in 2fla+. DFT calculations predicted that the negatively charged carboxylate group of ligand L3NCOO- determines the higher reactivity of 1fla with dioxygen by decreasing the oxidation potential of the bound fla-/fla˙ couple. During the dioxygenation process, the reactive Co(II)-bound flavonoxy radical was generated via single-electron transfer from the coordinated fla- to dioxygen, simultaneously forming a superoxide ion. The anionic carboxylate group improves the stability of the bound flavonoxy radical by providing substantial electron density to the electron-deficient fla˙ through the Co(II) centre, allowing the reactive fla˙ species to accumulate at an optimal concentration for effective catalysis. EPR spectroscopy successfully detected the cobalt-bound fla˙ species formed through the dioxygenation of 1fla. NBT2+ and EPR spin-trapping experiments confirmed superoxide formation during the dioxygenation process. So, the present work describes CoII-2,4-QD model studies and clarifies the function of carboxylate in quercetinase-like reactivity.

Catalytic and Chemodivergent Synthesis of 1-Substituted 9H-Pyrrolo[1,2-a]indoles via Annulation of β-CF3 Enones with 3-Substituted Indoles.

Chemodivergent reactions are more advantageous in organic synthesis that yield diversely functionalized scaffolds from common starting materials. Herein, we report an efficient metal-free chemodivergent protocol for the synthesis of 1-substituted 9H-pyrrolo[1,2-a]indole derivatives in the presence of catalytic amounts of Lewis acid/Brønsted acid conditions using 3-substituted indoles and β-trifluoromethyl-α,β-unsaturated ketones. Fine-tuning of the catalyst and solvent system in the reaction conditions deliver the trifluoromethyl, trifluoroethylcarboxylate, or carboxylic acid substituents on the C1-position of 9H-pyrrolo[1,2-a]indole derivatives in situ. It is postulated that the solvent and LA/BA catalyst interaction was found to be crucial for the catalytic C-F activation in these transformations.

Carboxylated Pillar[6]arene Emulates Pillar[5]arene in the Host–Guest Crystal Complexes and Shows Conformational Flexibility in the Solution/Gas Phase

Despite the thriving interest in the aqueous complexation properties of carboxylated pillar[6]arene, its solid state supramolecular chemistry has remained a mystery. Here, overcoming challenging crystallogenesis, we report the first crystallographic authentication of carboxylated pillar[6]arene in the form of two host–guest inclusion complexes with methyl viologen and pentamidine. The key to the successful crystallization of carboxylated pillar[6]arene is the mixed ionization state of its 12 carboxylic substituents. The deprotonation of several but not all substituents enables intermolecular hydrogen bonding and, as a result, “gluing” and crystallization of pillar[6]arene complexes with the aid of carboxylic-carboxylate, carboxylic-carboxylic, and amidinium-carboxylate supramolecular synthons. Single crystal X-ray diffraction analysis revealed that upon guest inclusion pillar[6]arene adopts a quasi-pentagonal shape rather than the expected hexagonal shape. The squeezed quasi-pentagonal conformation of the six-membered macrocycle is stabilized by two intramolecular hydrogen bonds between pillar[6]arene substituents. Moreover, the distinctive deviation of the macrocycle from hexagonal shape stays operative in the solution/gas phase as concluded from ion mobility mass spectrometry (IM-MS) studies and theoretical calculations. These results provide the first insight into how to gain control over the conformation of flexible pillar[6]arene with a view of solid state design of more advanced supramolecular host–guest structures.

Effects of different carboxylic acid substituents on the electrochemical performance of polythiophene anode materials for lithium-ion batteries

The effect of different carboxylic acid substituents on the electrochemical performance of polythiophene anode materials was discussed. In terms of cycle and rate performance, isophthalic acid substituted polythiophene (P3-TBDCOOH) outperforms formic and parabenzoic acid substituted polythiophenes (P3-TCOOH and P3-TBCOOH). P3-TBDCOOH has a specific capacity of 681.1 mAh g−1 after 100 cycles at 50 mA g−1 and a capacity of 340.8 mAh g−1 after 1000 cycles at 1000 mA g−1. According to density functional theory calculations, P3-TBDCOOH and P3-TBCOOH with a benzene ring between the thiophene ring and the carboxyl group have higher conductivity than P3-TCOOH without a benzene ring, and P3-TBDCOOH shows stronger conductivity than P3-TBCOOH and P3-TCOOH. The results imply that the pendant isophthalic acid can enhance the electrochemical activity of polythiophene, increasing the reversible capacity.

Designing High-Performance Wide Bandgap Polymer Donors by the Synergistic Effect of Introducing Carboxylate and Fluoro Substituents

Designing High-Performance Wide Bandgap Polymer Donors by the Synergistic Effect of Introducing Carboxylate and Fluoro Substituents

Efficient Photocatalytic Hydrogen and Oxygen Evolution by Side-Group Engineered Benzodiimidazole Oligomers with Strong Built-in Electric Fields and Short-Range Crystallinity.

The insufficient charge separation and sluggish exciton transport severely limit the utilization of polymeric photocatalysts. To resolve the above issues, we incorporate bountiful carboxyl substituents within a novel benzodiimidazole oligomer and assemble it into a crystalline semiconductor. The photocatalyst is polar, hydrophilic, short-range crystalline, and capable of both hydrogen and oxygen evolution. The introduction of carboxyl side-groups adds asymmetry to the local structure and increases the built-in electric field. Further, accelerated carrier transfer is enabled via the short-range crystallinity. The superior hydrogen and oxygen production rates of 18.63 and 2.87 mmol g-1 h-1 represent one of the best performances ever reported among dual-functional polymeric photocatalysts. Our work initiates studies on high-performance oligomer photocatalysts, opening a new frontier to produce solar fuel.