Carbene Moiety Research Articles

C-H Insertion from Isolable Copper Benzylidenes.

Despite the utility of copper catalysts for the insertion of carbene moieties into C-H bonds, the copper carbene intermediate often invoked in these transformations has not been isolated. Herein, we describe the synthesis and structural characterization of a series of copper benzylidenes utilizing the sterically encumbered dipyrrin ligand (EmL)H. These isolated copper carbenes demonstrate intramolecular insertion into the primary C(sp3)-H bond of the ligand (EmL)H and intermolecular insertion into ethereal and allylic C-H bonds. The copper carbenes isolated are best described as Cu(I) carbene adducts akin to canonical Fischer carbenes, given their diamagnetic ground state and electrophilic carbene reactivity. Furthermore, the insertion chemistry can be rendered catalytic utilizing a more sterically exposed dipyrrin ligand (ArFL)H. The ability to isolate and observe stoichiometric C-H insertion and olefin cyclopropanation from well-characterized copper benzylidenes illuminates their viability as catalytic intermediates and their participation in potential catalyst deactivation pathways.

Intramolecular Buchner Reaction: Experimental and Theoretical Comparison of the Effect of the Carbene Substituent on the Chemoselectivity

AbstractThe intramolecular Buchner reaction is a powerful transformation able to dearomatize benzenic rings. However, the competitive C−H insertion of the carbene moiety into benzylic positions still remains a limitation, and the reasons governing this uncomplete chemoselectivity are poorly understood. The carbene substitution, in particular, has been observed to influence the selectivity strongly, though the currently proposed explanation relying on the electrophilicity of the metallocarbene hardly describes some experimental results reported in the literature. In this article, we present our experimental observations of intramolecular rhodium‐catalyzed Buchner reactions, combined with DFT calculations on selected carbene substituents, to propose a complementary explanation for the observed chemoselectivity modification.

"Inverted" Cyclic(Alkyl)(Amino)Carbene (CAAC) Ruthenium Complex Catalyzed Isomerization Metathesis (ISOMET) of Long Chain Olefins to Propylene at Low Ethylene Pressure.

Isomerization Metathesis (ISOMET) reaction is an emerging tool for "open loop" chemical recycling of polyethylene to propylene. Novel, latent N-Alkyl substituted Cyclic(Alkyl)(Amino)Carbene (CAAC)-ruthenium catalysts (5a-Ru, 3b-Ru - 6c-Ru) are developed rendering "inverted" chemical structure while showing enhanced ISOMET activity in combination with (RuHCl)(CO)(PPh3)3(RuH) double bond isomerization co-catalyst. Systematic investigations reveal that the steric hindrance of the substituents on nitrogen and carbon atom adjacent to carbene moiety in the CAAC ligand have significantly improved the catalytic activity and robustness. In contrast to the NHC-Ru and CAAC-Ru catalyst systems known so far, these systems show higher isomerization metathesis (ISOMET) activity (TON: 7400) on the model compound 1-octadecene at as low as 3.0bar optimized pressure, using technical grade (3.0) ethylene. The propylene content formed in the gas phase can reach up to 20% by volume.

Investigations of the Influence of Two Pyridyl-Mesoionic Carbene Constitutional Isomers on the Electrochemical and Spectroelectrochemical Properties of Group 6 Metal Carbonyl Complexes

Metal complexes of mesoionic carbenes (MICs) of the triazolylidene type and their derivatives have gained increasing attention in the fields of electrocatalysis and photochemistry. The redox activity of these metal complexes is critical for their applications in both the aforementioned fields. Easy accessibility and modular synthesis open a wide field for the design of ligands, such as bidentate ligands. The combination of an MIC with a pyridyl unit in a bidentate ligand setup increases the π acceptor properties of the ligands while retaining their strong σ donor properties. The analogy with the well-established 2,2′-bipyridine ligand allows conclusions to be drawn about the influence of the mesoionic carbene (MIC) moiety in tetracarbonyl group 6 complexes in cyclic voltammetry and (spectro)electrochemistry (SEC). However, the effects of the different connectivity in pyridyl-MIC ligands remain underexplored. Based on our previous studies, we present a thorough investigation of the influence of the two different pyridyl-MIC constitutional isomers on the electrochemical and the UV-vis-NIR/IR/EPR spectroelectrochemical properties of group 6 carbonyl complexes. Moreover, the presented complexes were investigated for the electrochemical conversion of CO2 using two different working electrodes, providing a fundamental understanding of the influence of the electrode material in the precatalytic activation.

Mono(Lewis Base)-Stabilized Gallium Iodide: An Unexplored Class of Promising Ligands.

Quantum-chemical (DFT) calculations on hitherto unknown base(carbene)-stabilized gallium monoiodides (LB→GaI) suggest that these systems feature one lone pair of electrons and a formally vacant p-orbital - both centered at the central gallium atom - and exhibit metallomimetic behavior. The calculated reaction free energies as well as bond dissociation energies suggest that these LB→GaI systems are capable of forming stable donor-acceptor complexes with group 13 trichlorides. Examination of the ligand exchange reactions with iron and nickel complexes indicates their potential use as ligands in transition metal chemistry. In addition, it is found that the title compounds are also able to activate various enthalpically robust bonds. Further, a detailed mechanistic investigation of these small molecule activation processes reveals the non-innocent behavior of the carbene (base) moiety attached to the GaI fragment, thereby indicating the cooperative nature of these bond activation processes. The energy decomposition analysis (EDA) and activation strain model (ASM) of reactivity were also employed to quantitatively understand and rationalize the different activation processes.

Synthesis of P-bridged, planar bis(NHC) BCl3 adducts.

Planar PV- or PIII-bridged bis(NHCs), which have only been employed in transition metal complex chemistry so far, were subjected to BCl3-containing solutions targeting the corresponding bis(NHC) BCl3 adducts. While the P(O)NEt2-bridged bis(NHC) showed the expected adduct formation, the PNEt2-bridged bis(NHC) reacted not only at the carbene moiety but also at the P-NEt2 functional group. The latter enabled access to the first 1,4-diphosphinine bis(NHC) main group adduct; its formation and properties were investigated by DFT calculations. Through the same route, a 1,4-diphosphinine bis(imidazolium) scaffold was generated and explored theoretically and experimentally. The new 1,4-diphosphinines are shown to possess high global aromaticity and a unique P-centred reactivity, allowing the formation of hitherto inaccessible [4 + 2]-cycloaddition products, thus suggesting potential new applications compared to previously known 1,4-diphosphinine derivatives.

How to tune luminescent Cu(i) complexes with strong donor carbenes towards TADF?

Design principles of Cu(i) complexes to induce thermally activated delayed fluorescence (TADF) behaviour with an electron-rich carbene moiety are elucidated by means of time-resolved luminescence and high-quality quantum chemical calculations.

Design of Stereogenic‐at‐Iron Catalysts with a (3+2+1)‐Ligand Sphere

AbstractA stereogenic‐at‐iron(II) catalyst scaffold is introduced which contains one coordinated meridional tridentate imidazolidin‐2‐ylidene‐functionalized 2,2′‐bipyridine, one bidentate pyrazolylpyridine, and one monodentate acetonitrile ligand. This (3+2+1)‐coordination sphere implements a stereogenic iron center. A carbon stereocenter in the N‐heterocyclic carbene moiety controls the absolute metal‐centered configuration. The bench‐stable diamagnetic iron(II) complexes can be synthesized in a highly diastereoselective fashion from iron dibromide in an efficient one‐pot coordination reaction. The obtained enantiopure complexes were applied as chiral catalysts in the ring contraction of an isoxazole to a chiral 2H‐azirine (quantitative yields, up to 90 : 10 er).

Cooperative Activation of Small Molecules by Base-Stabilized Borylenes.

Computational investigations were carried out using density functional theory (ωB97XD(toluene)/6-311+G*) on a series of base-stabilized borylenes to understand their ligand properties and potential toward the activation of enthalpically strong E-H bonds (E = H, NH2, SiH2Ph, and CH3) as well as binding with small molecules such as CO and CNMe. The calculated reaction free energies and activation barriers suggest the ability of hitherto unexplored carbene-stabilized borylenes to not only split such bonds but also bind with CO and CNMe. A detailed mechanistic study of these bond activation processes reveals the noninnocent behavior of the carbene moiety attached to the boron center, thereby leading to cooperative splitting of the bonds of interest. The binding of CO and CNMe to the base-stabilized borylenes was investigated by energy decomposition analysis (EDA) with natural orbitals for chemical valence (NOCV), which gave appreciable interaction energy (ΔEint) values, thereby indicating strong binding of CO and CNMe to these borylenes.

Isonimesulide and Its Carborane Analogues as Isoform‐Selective COX Inhibitors and Antitumor Agents

AbstractNonsteroidal anti‐inflammatory drugs (NSAIDs) are the most widely used therapeutics against pain, fever, and inflammation; additionally, antitumor properties are reported. NSAIDs reduce the synthesis of prostaglandins by inhibiting the cyclooxygenase (COX) isoforms COX‐1 and COX‐2. As nonselective inhibition is associated with off‐target effects, strategies to achieve selectivity for the clinically preferred isoform COX‐2 are of high interest. The modification of NSAIDs using carborane clusters as phenyl mimetics is reported to alter the selectivity profile through size exclusion. Inspired by these findings, isonimesulide and its carborane derivatives are prepared. The biological screening shows that the carborane containing compounds exhibit a stronger antitumor potential compared to nimesulide and isonimesulide. Furthermore, the replacement of the phenyl ring of isonimesulide with a carborane moiety resulted in a shift of the COX activity from nonactive to COX‐active compounds.

Mixed Matrix Membranes with Surface Functionalized Metal-Organic Framework Sieves for Efficient Propylene/Propane Separation.

Membrane technology, regarded as an environmentally friendly and sustainable approach, offers great potential to address the large energy penalty associated with the energy-intensive propylene/propane separation. Quest for molecular sieving membranes for this important separation is of tremendous interest. Here, a fluorinated metal-organic framework (MOF) material, known as KAUST-7 (KAUST: King Abdullah University of Science and Technology) with well-defined narrow 1D channels that can effectively discriminate propylene from propane based on a size-sieving mechanism, is successfully incorporated into a polyimide matrix to fabricate molecular sieving mixed matrix membranes (MMMs). Markedly, the surface functionalization of KAUST-7 nanoparticles with carbene moieties affords the requisite interfacial compatibility, with minimal nonselective defects at polymer-filler interfaces, for the fabrication of a molecular sieving MMM. The optimal membrane with a high MOF loading (up to 45wt.%) displays a propylene permeability of ≈95 barrer and a mixed propylene/propane selectivity of ≈20, far exceeding the state-of-the-art upper bound limits. Moreover, the resultant membrane exhibits robust structural stability under practical conditions, including high pressures (up to 8bar) and temperatures (up to 100°C). The observed outstanding performance attests to the importance of surface engineering for the preparation and plausible deployment of high-performance MMMs for industrial applications.

Development of the High-Affinity Carborane-Based Cannabinoid Receptor Type 2 PET Ligand [18F]LUZ5-d8.

The development of cannabinoid receptor type 2 (CB2R) radioligands for positron emission tomography (PET) imaging was intensively explored. To overcome the low metabolic stability and simultaneously increase the binding affinity of known CB2R radioligands, a carborane moiety was used as a bioisostere. Here we report the synthesis and characterization of carborane-based 1,8-naphthyridinones and thiazoles as novel CB2R ligands. All tested compounds showed low nanomolar CB2R affinity, with (Z)-N-[3-(4-fluorobutyl)-4,5-dimethylthiazole-2(3H)-ylidene]-(1,7-dicarba-closo-dodecaboranyl)-carboxamide (LUZ5) exhibiting the highest affinity (0.8 nM). Compound [18F]LUZ5-d8 was obtained with an automated radiosynthesizer in high radiochemical yield and purity. In vivo evaluation revealed the improved metabolic stability of [18F]LUZ5-d8 compared to that of [18F]JHU94620. PET experiments in rats revealed high uptake in spleen and low uptake in brain. Thus, the introduction of a carborane moiety is an appropriate tool for modifying literature-known CB2R ligands and gaining access to a new class of high-affinity CB2R ligands, while the in vivo pharmacology still needs to be addressed.

The More the Better-Investigation of Polymethoxylated N-Carboranyl Quinazolines as Novel Hybrid Breast Cancer Resistance Protein Inhibitors.

The ineffectiveness and failing of chemotherapeutic treatments are often associated with multidrug resistance (MDR). MDR is primarily linked to the overexpression of ATP-binding cassette (ABC) transporter proteins in cancer cells. ABCG2 (ATP-binding cassette subfamily G member 2, also known as the breast cancer resistance protein (BCRP)) mediates MDR by an increased drug efflux from the cancer cells. Therefore, the inhibition of ABCG2 activity during chemotherapy ought to improve the efficacy of the administered anti-cancer agents by reversing MDR or by enhancing the agents' pharmacokinetic properties. Significant efforts have been made to develop novel, powerful, selective, and non-toxic inhibitors of BCRP. However, thus far the clinical relevance of BCRP-selective MDR-reversal has been unsuccessful, due to either adverse drug reactions or significant toxicities in vivo. We here report a facile access towards carboranyl quinazoline-based inhibitors of ABCG2. We determined the influence of different methoxy-substitution patterns on the 2-phenylquinazoline scaffold in combination with the beneficial properties of an incorporated inorganic carborane moiety. A series of eight compounds was synthesized and their inhibitory effect on the ABCG2-mediated Hoechst transport was evaluated. Molecular docking studies were performed to better understand the structure-protein interactions of the novel inhibitors, exhibiting putative binding modes within the inner binding site. Further, the most potent, non-toxic compounds were investigated for their potential to reverse ABCG2-mediated mitoxantrone (MXN) resistance. Of these five evaluated compounds, N-(closo-1,7-dicarbadodecaboran(12)-9-yl)-6,7-dimethoxy-2-(3,4,5-trimethoxyphenyl)-quinazolin-4-amine (DMQCd) exhibited the strongest inhibitory effect towards ABCG2 in the lower nanomolar ranges. Additionally, DMQCd was able to reverse BCRP-mediated MDR, making it a promising candidate for further research on hybrid inorganic-organic compounds.

Studies on the effect of polyhedral carboranes on the physicochemical properties of polycarboranosiloxanes

In this work, polycarboranosiloxanes with well-defined structures and a varying content of the carborane moiety (2–15 wt%) were obtained. Data of rheological studies indicate that phase separation occurs in such hybrid carboranosiloxane systems.

Selective alkane hydroxylation and alkene epoxidation using H2O2 and Fe(II) catalysts electrostatically attached to a fluorinated surface.

Fe(II) complexes with pentadentate ligands, including N-heterocyclic carbene moieties, were prepared and electrostatically attached onto the perfluorinated surface of a mesoporous aluminosilicate. The heterogeneous catalysts were applied to the catalytic oxidation of cyclohexane and cyclohexene using H2O2 as an oxidant in CH3CN, demonstrating high performance and selectivity in alkane hydroxylation and cyclohexene epoxidation.

Improving the Configurational Stability of Chiral-at-Iron Catalysts Containing Two N-(2-Pyridyl)-Substituted N-Heterocyclic Carbene Ligands.

Recently, we introduced the first example of chiral-at-iron catalysts in which two achiral N-(2-pyridyl)-substituted N-heterocyclic carbene (NHC) ligands in addition to two labile acetonitriles are coordinated around a central iron, to generate a stereogenic metal center [Hong Y.Chiral-at-Iron Catalyst: Expanding the Chemical Space for Asymmetric Earth-Abundant Metal Catalysis. J. Am. Chem. Soc.2019, 141, 4569-4572]. A more facile synthesis of such chiral-at-iron catalysts was developed, which omits the use of expensive silver salts and an elaborate electrochemical setup. Configurational robustness was improved by replacing the imidazol-2-ylidene carbene moieties with benzimidazol-2-ylidenes. The π-acceptor properties of the altered NHCs were investigated by Ganter's 77Se NMR method. The obtained benzimidazol-2-ylidene chiral-at-iron complex is an excellent catalyst for an asymmetric hetero-Diels-Alder reaction under open-flask conditions.

Coordination Chemistry of Ir with Chelating Ligands Containing a Xanthine‐Derived, Protic N‐Heterocyclic Carbene (NHC) Moiety

AbstractA series of protic N‐heterocyclic carbene ligand precursors based on theophylline or adenine has been prepared, and the reactivity and coordination chemistry of these proligands towards iridium(III) centers has been investigated. Complex formation appears to be highly dependent on the proligand structure. In one case, a particularly stable complex is formed that enables fully reversible protonation/deprotonation of the coordinated NHC moiety. The acidity constant of the protonated complex was consequently determined.

Cobalt(II)-tetraphenylporphyrin-catalysed carbene transfer from acceptor-acceptor iodonium ylides via N-enolate-carbene radicals.

Square-planar cobalt(II) systems have emerged as powerful carbene transfer catalysts for the synthesis of numerous (hetero)cyclic compounds via cobalt(III)-carbene radical intermediates. Spectroscopic detection and characterization of reactive carbene radical intermediates is limited to a few scattered experiments, centered around monosubstituted carbenes. Here, we reveal the formation of disubstituted cobalt(III)-carbene radicals derived from a cobalt(II)-tetraphenylporphyrin complex and acceptor-acceptor λ3-iodaneylidenes (iodonium ylides) as carbene precursors and their catalytic application. Iodonium ylides generate biscarbenoid species via reversible ligand modification of the paramagnetic cobalt(II)-tetraphenylporphyrin complex catalyst. Two interconnected catalytic cycles are involved in the overall mechanism, with a monocarbene radical and an N-enolate-carbene radical intermediate at the heart of each respective cycle. Notably, N-enolate formation is not a deactivation pathway but a reversible process, enabling transfer of two carbene moieties from a single N-enolate-carbene radical intermediate. The findings are supported by extensive experimental and computational studies.

Localized π Surface States on 2D Molybdenum Disulfide from Carbene-Functionalization as a Qubit Design Strategy.

Surface chemistry is increasingly important for a number of applications, from catalysis to molecular qubits. For the qubit application, it is imperative that the energy levels of surface species involved in the process of interest are energetically distinct-that is addressable and not buried below or coincident with the substrate energy levels. One way to afford this is through chemical functionalization with derivatives that impart the property of choice to the interface. In this Letter, we report on the nature of the bond between a carbene moiety and an MoS2 surface. With density functional theory (DFT) and spin-polarized calculations, we first observe states in the band structure that pertain to the carbene group and then prove their origin. Importantly, we find localized π-states in the band gap that are due to π-electrons that are part of a diene attached to the carbene carbon and are not available in bonding configurations without the π conjugation. These lead to open-shell monocationic structures involving midgap HOMOs with densities on the carbene moiety. Both neutral and cationic forms of the carbenes are energetically separate from the MoS2 substrate, thus useful for optical manipulation. We explore several different choices of the carbene moieties, and show that those based on fused thiophene and bithiophene structures are the most favorable for localization, while purely carbon-based aromatic structures lead to states that are delocalized onto the MoS2 and thus less useful. These findings are potentially of interest to the design and synthesis of future molecular qubit candidates for device fabrication.

Electronic structure and bonding in N-hetero cyclic carbene stabilized naked group 16 atoms – In-plane hyperconjugation and bond polarity

Bonding analysis of the exocyclic NHCCE (E = O, S and Se) bond in lesser explored five-membered N-heterocyclic carbene (NHC) stabilized naked Group 16 atoms, known as imidazolin-2-chalcogenones, using different theoretical methods reveal that imidazolin-2-one and imidazolin-2-thione can be best represented as 1,2-dipolar species with NHCC+↔O¯/S¯ electron sharing σ- and NHCC+←O¯/S¯ donor–acceptor π⊥ and π‖ hyperconjugative interactions, whereas the bonding situation in imidazolin-2-selone can be depicted as NHCC → Se σ- and NHCC ← Se π⊥-type donor–acceptor and NHCC ← Se π‖ hyperconjugative interactions between Se and carbene moiety. The in-plane hyperconjugation is stronger for polar CE bonds and lighter Group 16 elements.