Carbonyl Compounds Research Articles

Synthesis of N‐Difluoromethyl Carbonyl Compounds from N‐Difluoromethylcarbamoyl Fluorides

AbstractFluorinated small molecules are commonly used in functional small‐molecule chemistry, and N‐difluoromethyl (N‐CF2H) compounds are particularly intriguing due to their unique and unexplored physiochemical properties. However, despite limited progress, a general methodological approach to the synthesis of N‐CF2H compounds remains elusive. Here, guided by computation, we present a simple and practical protocol to access N‐CF2H amides and related carbonyl derivatives. The protocol involves a one‐pot conversion of thioformamides through desulfurization‐fluorination and acylation, providing N‐difluoromethylcarbamoyl fluoride building blocks that can be further diversified to a variety of unexplored N‐CF2H carbonyl compounds with rich functionality. Additionally, preliminary studies on their properties and stability showcased their potential application in pharmaceuticals and agrochemicals.

Synthesis of N-Difluoromethyl Carbonyl Compounds from N-Difluoromethylcarbamoyl Fluorides.

Fluorinated small molecules are commonly used in functional small-molecule chemistry, and N-difluoromethyl (N-CF2H) compounds are particularly intriguing due to their unique and unexplored physiochemical properties. However, despite limited progress, a general methodological approach to the synthesis of N-CF2H compounds remains elusive. Here, guided by computation, we present a simple and practical protocol to access N-CF2H amides and related carbonyl derivatives. The protocol involves a one-pot conversion of thioformamides through desulfurization-fluorination and acylation, providing N-difluoromethylcarbamoyl fluoride building blocks that can be further diversified to a variety of unexplored N-CF2H carbonyl compounds with rich functionality. Additionally, preliminary studies on their properties and stability showcased their potential application in pharmaceuticals and agrochemicals.

Enantioselective Zirconium-catalyzed Transformations

Abstract: The cheaper and less-toxic metals of group 4 compared with common metals used in catalysis are increasingly applied in catalysis, resulting in the development of many novel greener transformations. Zirconium is abundant, non-toxic, and exhibits a remarkably diversified chemical reactivity among these metals. Since the first asymmetric zirconium-catalyzed reaction disclosed by Nugent in 1992, a wide variety of chiral zirconium catalysts have been proven to be capable of promoting many types of highly enantioselective transformations, spanning from standard reactions, such as Friedel-Crafts reactions, cycloadditions, aldol reactions, Mannich reactions, epoxidations, nucleophilic additions to carbonyl compounds and derivatives, cyanations, ring-opening reactions, hydroxylations, hydroformylations, carboaluminations among others, to more modern and complex domino and tandem processes. This review aims to collect the major progress achieved in the field of enantioselective transformations of all types promoted by chiral zirconium catalysts, covering the literature since the beginning of 2003 and illustrating the power of these non-toxic catalysts to provide high enantioselectivity in almost all kinds of asymmetric organic reactions. It is divided into ten parts, focussing consecutively on enantioselective Friedel-Crafts reactions, cycloadditions, aldol reactions, Mannich reactions, epoxidations, additions of alkylzinc reagents to imines, cyanations, ring-opening reactions, hydroxylations, and domino/ tandem reactions. The diversity of these transformations well reflects that of the products synthesized. For example, chiral indole and pyrrole derivatives were prepared from Friedel-Crafts reactions; pyranones, pyridones and pyrazolidines from cycloadditions; β-hydroxy α-diazo carbonyl compounds, β- hydroxy (thio)esters and β-hydroxy-α-amino acid derivatives from aldol reactions; β-amino (thio)esters from Mannich reactions; functionalized epoxides from epoxidations; amines from additions of alkylzinc reagents to imines; amino nitriles from cyanations; 1,2-diamines and β-vinyloxy alcohols from ring-opening processes; 2- hydroxy 1-indanones from hydroxylations; various amines, 1,3-anti-diol monoesters, β-amino esters, α,β- dihydroxy acid derivatives, α-amino ketones, indoles, cyclopentane and aryl α-aminophosphonates from domino/ tandem reactions. Furthermore, the utility of these novel methodologies was demonstrated in the total synthesis of numerous essential bioactive products, such as (+)-prelactone C, (+)-9-deoxygoniopypyrone, (+)- coniine, vancomycin, (+)-fusarisetin A, mycolipenic acid, onchidin, indoxacarb, tachykinin receptor antagonists, cerebroprotecting agent MS-153, and L-erythro-sphingosine. : The advances achieved in the last three decades demonstrate that the non-toxicity, abundance, and efficiency of zirconium make its application in catalysis suiting the growing demand for more environmentally benign processes, offering the real opportunity to replace other toxic and expensive metals in the near future.

Temperature-Dependent Kinetics of the Reactions of the Criegee Intermediate CH2OO with Hydroxyketones.

Though there is a growing body of literature on the kinetics of CIs with simple carbonyls, CI reactions with functionalized carbonyls such as hydroxyketones remain unexplored. In this work, the temperature-dependent kinetics of the reactions of CH2OO with two hydroxyketones, hydroxyacetone (AcOH) and 4-hydroxy-2-butanone (4H2B), have been studied using a laser flash photolysis transient absorption spectroscopy technique and complementary quantum chemistry calculations. Bimolecular rate constants were determined from CH2OO loss rates observed under pseudo-first-order conditions across the temperature range 275-335 K. Arrhenius plots were linear and yielded T-dependent bimolecular rate constants: kAcOH(T) = (4.3 ± 1.7) × 10-15 exp[(1630 ± 120)/T] and k4H2B(T) = (3.5 ± 2.6) × 10-15 exp[(1700 ± 200)/T]. Both reactions show negative temperature dependences and overall very similar rate constants. Stationary points on the reaction energy surfaces were characterized using the composite CBS-QB3 method. Transition states were identified for both 1,3-dipolar cycloaddition reactions across the carbonyl and 1,2-insertion/addition at the hydroxyl group. The free-energy barriers for the latter reaction pathways are higher by ∼4-5 kcal mol-1, and their contributions are presumed to be negligible for both AcOH and 4H2B. The cycloaddition reactions are highly exothermic and form cyclic secondary ozonides that are the typical primary products of Criegee intermediate reactions with carbonyl compounds. The reactivity of the hydroxyketones toward CH2OO appears to be similar to that of acetaldehyde, which can be rationalized by consideration of the energies of the frontier molecular orbitals involved in the cycloaddition. The CH2OO + hydroxyketone reactions are likely too slow to be of significance in the atmosphere, except at very low temperatures.

Role of Carbonyl Compounds for N-Nitrosamine Formation during Nitrosation: Kinetics and Mechanisms.

N-Nitrosamines are potential human carcinogens frequently detected in natural and engineered aquatic systems. This study sheds light on the role of carbonyl compounds in the formation of N-nitrosamines by nitrosation of five secondary amines via different pathways. The results showed that compared to a control system, the presence of formaldehyde enhances the formation of N-nitrosamines by a factor of 5-152 at pH 7, depending on the structure of the secondary amines. Acetaldehyde showed a slight enhancement effect on N-nitrosamine formation, while acetone and benzaldehyde did not promote nitrosation reactions. For neutral and basic conditions, the iminium ion was the dominant intermediate for N-nitrosamine formation, while carbinolamine became the major contributor under acidic conditions. Negative free energy changes (<-19 kcal mol-1) and relatively low activation energies (<18 kcal mol-1) of the reactions of secondary amines with N2O3, iminium ions with nitrite and carbinolamines with N2O3 from quantum chemical computations further support the proposed reaction pathways. This highlights the roles of the iminium ion and carbinolamine in the formation of N-nitrosamines during nitrosation in the presence of carbonyl compounds, especially in the context of industrial wastewater.

Synthesis Characterization and Biological Activity of 4-Methyl-benzene Sulfonohydrazide Derivatives

Background: A schiff base is generally a bi- or tri-dentate ligand capable of forming stable complexes with transition metals. Schiff base complexes have synthetic flexibilities and biological activity against various diseases. Objective: In the current study, Schiff bases compounds (PV1 - PV5) were synthesized from 4-methyl-1- benzene sulfonyl chloride. Subsequently, the synthesized products were analyzed for their antibacterial activity. Methods: Schiff base is a nitrogen analog with a carbonyl group. The reaction that results in the formation of new complexes involves the condensation of carbonyl compounds with an amine group. Furthermore, thin layer chromatography, FT-IR spectroscopy, and 1H-NMR were performed for product characterization. Results: All five complexes were successfully synthesized and some of the compounds demonstrated antibacterial, antifungal, anti-inflammatory and analgesic properties. Conclusion: The results confirmed the structure and presence of functional groups as per the scheme of synthesis. These synthesized compounds have the potential to treat the studied diseases and could be used as therapeutic candidates if further research is done.

Importance and Green Synthesis of Amines: A Review

Abstract: Amines are “derivatives of ammonia” and important key intermediates for applications in the industrial, pharmaceutical, electronics, etc. They have been used to synthesize industrially important azo dyes, which are used to color various materials. Moreover, amine functionality is present in several important biological molecules. Biogenic amines are found in living organisms and play essential physiological functions in the body. They are prepared from the amination and transamination reaction of carbonyl compounds such as aldehydes and ketones and the decarboxylation reaction of amino acids. Thus, the various applications and requirements of essential amine scaffolds paid attention to researchers to develop novel synthetic protocols to synthesize these compounds. In organic chemistry, various methods synthesize amines; however, green synthetic methods have recently become a trend. By writing this review, our main focus was to provide a brief on the importance of some biogenic amines and the synthesis of both amines via green synthetic methods.

Synthesis of Pyrazoline Derivatives and Their Pharmacological Activities: A Review of the Last Decade

AbstractPyrazolines are nitrogen–containing heterocyclic compounds that find widespread use as herbicides and are active pharmaceuticals in the agrochemical and pharmaceutical industries. Pyrazolines possess a five–membered ring with two nitrogen atoms and one endocyclic double bond. They are synthesized by conventional methods. However, Claisen–Schmidt condensation, a reaction of α, β‐unsaturated carbonyl (chalcones) compounds with hydrazine in the presence of acetic acid under refluxing conditions, is a popular conventional method. They have antibacterial, anti‐inflammatory, antifungal, antipyretic, anticancer, antidepressant, and analgesic properties. The present study summarizes the chemistry of various chalcone–based pyrazolines and their pharmacological activities with the available data till 2023.

Organic Photoredox Carbonylation of Arenediazonium under Mild Conditions

AbstractThe modular synthesis of diverse carbonyl compounds is at the heart of organic synthesis. An optimized protocol for photoredox carbonylation was developed that operates under milder conditions with mesitylacridinium as a photocatalyst. Arenediazonium salts were converted into benzoates (with alcohols), benzoic acids (with water), benzamides (with amines), and chlorides (with 1-butyl-3-methylimidazolium chloride) at 20 bar CO and 20 °C.

Facile Access of Olefins from Ketones and Arylboroxines Enabled by Rhodium Catalysis

AbstractOlefination of carbonyl compounds is a typical strategy for the synthesis of olefins. Herein, we reported a rhodium‐catalyzed cross‐coupling reaction of ketones with arylboroxines for straightforward access of olefins. The reaction displays a good functional group tolerance and affords the corresponding products in good to excellent yields. Addition and elimination are suggested as the indispensable steps in catalytic cycle by preliminary mechanistic experiments. This reaction provided a complementary method in catalytic construction of olefins from ketones and organoboron compounds.

Access to All-Carbon Quaternary Centers by Photocatalytic Fluoroalkylation of α-Halo Carbonyl Compounds.

Perfluoroalkyl groups have become significantly important in pharmaceutical and agrochemical applications. In this study, we present a visible light-mediated photoredox neutral strategy for the fluoroalkylation of tertiary alkyl chlorides under transition-metal-free conditions. This method allows for the facile synthesis of fluoroalkylated all-carbon quaternary centers, exhibiting excellent functional group compatibility. Mechanistic studies reveal the involvement of two reactive radical intermediates and the in situ formation of metal enolates in a radical-polar crossover manner. The versatility of this methodology is demonstrated through synthetic transformations based on the carbonyl group, showcasing its potential for the rapid assembly of diverse organic molecules bearing fluoroalkyl all-carbon quaternary centers.

Heterogeneous photochemical uptake of SO2 on typical brown carbon species: A significant sulfate source

The heterogeneous reactions of SO2 on organic aerosols (OA) have been proposed as a significant source of sulfates. The photochemical conversion of SO2 to sulfates on the surface of light-absorbing OA, i.e., brown carbon (BrC), remained slight understanding. Herein, the photochemical uptake of SO2 on typical BrC species, including aromatic carbonyl compounds (ACs), polycyclic aromatic hydrocarbons (PAHs) and phenols (PHs), was systematically investigated by a flow tube reactor. Light can significantly promote the uptake of SO2 on all BrC species used here, especially for ACs. The initial and steady-state uptake coefficients (γi and γss) of SO2 exhibited positive relationships with the light intensity, whereas they negatively correlated with the initial SO2 concentration. Significant sulfate formation was clearly observed with in situ attenuated total internal reflection infrared (ATR-IR) spectrometer, and H2O and O2 had obvious enhancement effects on the sulfate production. Photoinduced •OH, which primarily originated from •O2− that was generated through an electron transfer process on BrC under irradiation, was determined to be a key driver for the oxidation of SO2 to sulfates. Finally, SO2 lifetime and sulfate formation rate were evaluated on the basis of experimental results, highlighting potential contributions of BrC photochemistry to atmospheric SO2 loss and sulfate sources.

Nicotine, Humectants, and Tobacco-Specific Nitrosamines (TSNAs) in IQOS Heated Tobacco Products (HTPs): A Cross-Country Study.

Heated Tobacco Products (HTPs) purport to reduce exposure to tobacco-related toxicants compared to combustible cigarettes. This cross-sectional study examined the content of nicotine, two humectants (propylene glycol (PG) and vegetable glycerin (VG)), and four tobacco-specific nitrosamines (TSNAs: NNN, NNK, NAT, and NAB) in the tobacco filler of a popular HTP brand (IQOS). Non-menthol and menthol IQOS sticks were purchased from nine countries between 2017 and 2020 and were classified into two versions ("Bold" and "Light") using Philip Morris's flavor descriptors. The average nicotine concentration was 4.7 ± 0.5 mg/stick, and the highest nicotine concentration was found in products from Japan (5.1 ± 0.2 mg/stick). VG was the dominant humectant found in all sticks, with an average concentration of (31.5 ± 2.3 mg/stick). NNN, NNK, and NAT were substantially higher in the "Bold" sticks than the "Light" sticks. Significant differences between countries for TSNAs were also observed: the NAT and NAB contents were the highest in the "Light" products from Canada (192.5 ± 24.1 and 22.9 ± 1.0 ng/stick, respectively); the NNK concentration was the highest in the "Bold" products from Poland (64.8 ± 7.9 ng/stick); and the highest NNN concentrations were observed in the "Bold" products from South Africa (488.9 ± 26.7 ng/stick). As NNN and NNK are known human carcinogens, and as humectants like PG and VG can degrade into toxic carbonyl compounds upon heating, monitoring the concentration of these chemicals in HTPs is important for protecting users' health and ensuring compliance with regulations.

Isomorphic Insertion of Ce(III)/Ce(IV) Centers into Layered Double Hydroxide as a Heterogeneous Multifunctional Catalyst for Efficient Meerwein-Ponndorf-Verley Reduction.

The development of highly active acid-base catalysts for transfer hydrogenations of biomass derived carbonyl compounds is a pressing challenge. Solid frustrated Lewis pairs (FLP) catalysis is possibly a solution, but the development of this concept is still at a very early stage. Herein, stable, phase-pure, crystalline hydrotalcite-like compounds were synthesized by incorporating cerium cations into layered double hydroxide (MgAlCe-LDH). Besides the insertion of well-isolated cerium centers surrounded by hydroxyl groups, the formation of hydroxyl vacancies near the aluminum centers, which were formed by the insertion of cerium centers into the layered double hydroxides (LDH) lattice, was also identified. Depending on the initial cerium concentration, LDHs with different Ce(III)/Ce(IV) ratios were produced, which had Lewis acidic and basic characters, respectively. However, the acid-base character of these LDHs was related to the actual Ce(III)/Ce(IV) molar ratios, resulting in significant differences in their catalytic performance. The as-prepared structures enabled varying degrees of transfer hydrogenation (Meerwein-Ponndorf-Verley MPV reduction) of biomass-derived carbonyl compounds to the corresponding alcohols without the collapse of the original lamellar structure of the LDH. The catalytic markers through the test reactions were changed as a function of the amount of Ce(III) centers, indicating the active role of Ce(III)-OH units. However, the cooperative interplay between the active sites of Ce(III)-containing specimens and the hydroxyl vacancies was necessary to maximize catalytic efficiency, pointing out that Ce-containing LDH is a potentially commercial solid FLP catalysts. Furthermore, the crucial role of the surface hydroxyl groups in the MPV reactions and the negative impact of the interlamellar water molecules on the catalytic activity of MgAlCe-LDH were demonstrated. These solid FLP-like catalysts exhibited excellent catalytic performance (cyclohexanol yield of 45%; furfuryl alcohol yield of 51%), which is competitive to the benchmark Sn- and Zr-containing zeolite catalysts, under mild reaction conditions, especially at low temperature (T = 65 °C).

Features and Advantages of the Recurrent Approximation of Retention Times in Reversed-Phase High-Performance Liquid Chromatography

Background: Recurrent approximation of retention parameters in reversed-phase HPLC is effective for revealing anomalies that are otherwise difficult to detect, namely, the reversible hydration of analytes. This was demonstrated previously for restricted sets of analytes with acetonitrile–water eluents. Expanding the number of analytes and eluents seems to be a topical problem. Two kinds of derivatives of aromatic carbonyl compounds were characterized: unsubstituted hydrazones and oximes. Methods: If analyte demonstrates no anomalies in dependences of retention times vs. concentration of organic modifier, the recurrent approximations of these dependences are linear. To explain the features of recurrent approximations, the numerical experiments were proposed and considered. The artificial shifting of one, two, or more points allows for the modeling the different kinds of deviations of approximations from linearity. Results: It was shown that hydrazones are the class of analytes having no anomalies of retention parameters. On the contrary, several anomalies were detected for oximes. Downward deviations of points in the plots of recurrent approximations of retention times are the signs of reversible hydration. This effect for methanol–water eluents was detected for the first time. Some of oximes underwent hydrolysis. Conclusions: Recurrent approximation of retention times allows detecting chemical transformations of analytes during RP HPLC analysis.

Chitosan-sulfonic acid-catalyzed green synthesis of naphthalene-based azines as potential anticancer agents.

Aim: This study focuses on advancing green chemistry in anticancer drug discovery, particularly through the synthesis of azine derivatives with a naphthalene core using CS-SO3H as a catalyst. Methods: Novel benzaldazine and ketazine derivatives were synthesized using (E)-(naphthalen-1-ylmethylene)hydrazine and various carbonyl compounds. The methods employed included thermal and grinding techniques, utilizing CS-SO3H as an eco-friendly and cost-effective catalyst. Results: The approach resulted in high yields, short reaction times and demonstrated catalyst reusability. Cytotoxicity tests highlighted compounds 3b, 11 and 13 as potent against the HEPG2-1. Conclusion: This study successfully aligns with the objectives of eco-conscious drug development in organic chemistry. Molecular docking and in silico studies further indicate the potential of these ligands as antitumor medicines, with favorable oral bioavailability properties.

A molecular electron density theory study of hydrogen bond catalysed polar Diels–Alder reactions of α,β-unsaturated carbonyl compounds

The hydrogen bond (HB) catalysed Diels-Alder (DA) reactions of acrolein with cyclopentadiene have been investigated within the Molecular Electron Density Theory (MEDT) at the ωB97X-D/6-311G(d,p) computational level. The formation of HBs increases the electrophilicity of these species, suggesting an acceleration of these polar Diels-Alder (P-DA) reactions with forward electron density flux. Formation of one or two HBs with acrolein decreases the activation energies of the HB-catalysed P-DA reactions by 1.7 (methanol) and 4.0 (squaramide) kcal·mol−1, with the corresponding DA reactions exhibiting low endo stereoselectivity. These HB-catalysed DA reactions proceed through non-concerted one-step mechanisms via asynchronous transition state structures (TSs). An Interacting Quantum Atoms (IQA) energy partitioning analysis of the TSs indicates that the intra-atomic stabilization of the acrolein framework, coupled with the increase of the global electron density transfer, plays a crucial role in reducing the activation energies of these HB-catalysed DA reactions.

Non-additive effect: Variation in the effects of the interaction between primitive components in anaerobic digestion

Inherent characteristics of complex organic components and their interactive coupling with environmental factors limit the comprehensive understanding of biotransformation in anaerobic digestion. In this study, we elucidated the mechanism underlying an interesting phenomenon, where a non-additive effect for methane production was recorded when primitive components, i.e., alpha-cellulose (α-CE), xylan (XY), and alkali lignin (AL), were used. The interaction of α-CE and XY produced a supra-additive effect due to the reduction of the energy barrier of carbonyl compound degradation. The degradation of non-conjugated CO, with lower kinetic stability, was preferred to the degradation of conjugated CO. The introduction of AL produced a sub-additive effect, and AL exerted a stronger inhibitory effect on the methanogenesis of XY than α-CE. The preferential change in the relevant structural units occurred due to the deposition of AL on the surface of XY or the wrapping of XY by AL. In this study, we described a multiphase integrated influence mechanism, which can be used to more effectively design anaerobic co-digestion strategies and achieve the controlled enhancement of methane yield of perishable organic solid waste.

Gas-diffusion microextraction combined with HPLC-DAD for the comprehensive analysis of volatile carbonyl compounds in wood-based panels

This work presents a novel application of gas-diffusion microextraction (GDME) combined with high-performance liquid chromatography with diode-array detection (HPLC-DAD) for the comprehensive analysis of volatile carbonyl compounds released from wood-based panels. GDME is a simple, fast, and environmentally friendly technique that allows the simultaneous extraction and derivatization of volatile carbonyls directly from solid samples. Commercial particleboards were analysed together with particleboard panels specifically produced using controlled conditions, materials, and reagents, to evaluate the differences in the emission profile of volatile carbonyl compounds. The effect of different production parameters, such as the type of wood particle, resin, and moisture content, on the emission profile of volatile carbonyls from particleboards was investigated using principal component analysis (PCA). The results showed that GDME-HPLC-DAD could successfully differentiate particleboards according to their emission of carbonyl compounds, such as formaldehyde, furfural, benzaldehyde, and other aliphatic carbonyls. Besides the differences on the emission of formaldehyde caused by the type of resin used, UF (urea-formaldehyde) and mUF (UF fortified with melamine), it was found that pine (Pinus pinaster Ait.) particleboards exhibit higher emissions of compounds such as acetaldehyde or hexanal when compared to the higher emissions of compounds such as furfural or benzaldehyde on the recycled particleboards.

The Catalytic Asymmetric Allylic Alkylation of Acyclic Enolates for the Construction of Quaternary and Tetrasubstituted Stereogenic Centres.

To facilitate the discovery and development of new pharmaceuticals, the demand for novel stereofunctionalised building blocks has never been greater. Whilst molecules bearing quaternary and tetrasubstituted stereogenic centres are ideally suited to explore untapped areas of chemical space, the asymmetric construction ofsterically congested carbon centres remains a longstanding challenge in organic synthesis. The enantioselective assembly of acyclic stereogenic centres is even more demanding due to the need to restrict a much wider range of geometries and conformations of the intermediates involved. In this context, the catalytic asymmetric allylicalkylation (AAA) of acyclic prochiral nucleophiles, namely enolates, has become an indispensable tool to access a range of linearα-quaternary andα-tetrasubstituted carbonyl compounds. However, unlike the AAA of cyclic enolates with a fixed enolate geometry, to achieve high levels of stereocontrol in the AAA of acyclic enolates, the stereoselectivity of enolisation must be considered. The aim of this review is to offer acomprehensivediscussion of catalytic AAA reactions of acyclic prochiral enolates and their analogues to generate congested quaternary and tetrasubstituted chiral centres using metal, non-metal and dual catalysis, with particular focus given to the control of enolate geometry and its impact on the stereochemical outcome of the reaction.