Carbonyl Carbon Research Articles

Controlled Ring‐Opening Polymerization of Methyl Glycolide with Bifunctional Organocatalyst

AbstractA bifunctional thiourea‐amine‐based organocatalyst (Takemoto's catalyst), employing a metal‐free approach, is presented for the regioselective ring‐opening polymerization (ROP) of optically active (D and L) methyl glycolide (MG). In this study, a chiral version of Takemoto's catalyst efficiently promotes the ROP of MG at room temperature, yielding poly(lactic‐co‐glycolic acids) (PLGAs) with predicted molecular weights and narrow polydispersity indices (PDI≤1.2). These PLGAs exhibit highly alternating structures without transesterification, as confirmed by 1H NMR, SEC, and MALDI‐TOF analyses. Additionally, various macromolecular architectures, including linear and star‐shaped PLGAs, were successfully synthesized using the corresponding multi‐functional alcohol initiators while maintaining the same alternating structures and regioselectivity with PLGA obtained from benzyl alcohol as initiator. Computational studies were conducted to elucidate the mechanism of alternating PLGA formation, revealing two key transition states (TSs): TS‐1, which implicates the nucleophilic attack of the hydroxyl group of the initiator or propagating chain on the carbonyl carbon of MG, and TS‐2, which involves the subsequent ring‐opening of the cyclic ester. The results indicate that ring‐opening occurs at both the glycolyl and lactyl sites, with a preference for the glycolyl site, as supported by experimental results. The resulting atactic PLGAs are amorphous, rendering them suitable for drug delivery applications.

Hydrogen Bonding Interaction Enabled Ru(III)‐Catalyzed Synthesis of (Multi)‐Substituted Pyridines

AbstractHerein, we report a cost‐effective synthesis of various multi‐substituted pyridine derivatives, especially 2‐aryl pyridines, using secondary alcohols and 1,3‐diol as the primary feedstock with ammonium acetate serving as nitrogen donor, catalyzed by a new well‐defined singlet mono‐radical Ru(III)‐catalyst featuring a cyclopentadienyl group, one PPh3, and a redox‐active scaffold −N1‐(2‐aminophenyl)benzene‐1,2‐diamine having a pendant ‐NH2 arm. The ‐NH2 arm of the catalyst facilitates the generation of the critical reactive intermediates by enhancing the electrophilicity of the carbonyl carbon center of the diols or diketones by forming hydrogen bonds, making it more catalytically effective over the similar other Ru‐catalysts having no pendant ‐NH2 arm. The Ru‐catalyst also functionalizes 2‐aryl pyridine moieties with different coupling partners, such as aryl iodides, terminal alkynes, and styrene derivatives at the o‐position of the phenyl ring.

Asymmetric Monoreduction of α,β-Dicarbonyls to α-Hydroxy Carbonyls by Ene Reductases.

Ene reductases (EREDs) catalyze asymmetric reduction with exquisite chemo-, stereo-, and regioselectivity. Recent discoveries led to unlocking other types of reactivities toward oxime reduction and reductive C-C bond formation. Exploring nontypical reactions can further expand the biocatalytic knowledgebase, and evidence alludes to yet another variant reaction where flavin mononucleotide (FMN)-bound ERs from the old yellow enzyme family (OYE) have unconventional activity with α,β-dicarbonyl substrates. In this study, we demonstrate the nonconventional stereoselective monoreduction of α,β-dicarbonyl to the corresponding chiral hydroxycarbonyl, which are valuable building blocks for asymmetric synthesis. We explored ten α,β-dicarbonyl aliphatic, cyclic, or aromatic compounds and tested their reduction with five OYEs and one nonflavin-dependent double bond reductase (DBR). Only GluER reduced aliphatic α,β-dicarbonyls, with up to 19% conversion of 2,3-hexanedione to 2-hydroxyhexan-3-one with an R-selectivity of 83% ee. The best substrate was the aromatic α,β-dicarbonyl 1-phenyl-1,2-propanedione, with 91% conversion to phenylacetylcarbinol using OYE3 with R-selectivity >99.9% ee. Michaelis-Menten kinetics for 1-phenyl-1,2-propanedione with OYE3 gave a turnover k cat of 0.71 ± 0.03 s-1 and a K m of 2.46 ± 0.25 mM. Twenty-four EREDs from multiple classes of OYEs and DBRs were further screened on 1-phenyl-1,2-propanedione, showing that class II OYEs (OYE3-like) have the best overall selectivity and conversion. EPR studies detected no radical signal, whereas NMR studies with deuterium labeling indicate proton incorporation at the benzylic carbonyl carbon from the solvent and not the FMN hydride. A crystal structure of OYE2 with 1.5 Å resolution was obtained, and docking studies showed a productive pose with the substrate.

Conjugated 1,3-diketone calix[4]arenes: synthesis, complexation and structure-dependent sensitizing of Eu3+-luminescence

This work presents new type of bis-1,3-diketone calix[4]arene derivatives, in which the chelate groups are directly conjugated through the carbonyl carbon atom with aromatic fragments of calix[4]arene, and their lower rims bear four propoxy groups or pairs of hydroxy and propoxy groups. Tetrapropoxy-calix[4]arene is synthesized by acylation of magnesium acetophenone enolates with calix[4]arene-based 1-acylbenzotriazoles, and the dipropoxy analogue is obtained by bromination of bis(chalcone)-calix[4]arene, followed by methanolysis and hydrolysis. Significant conjugation of 1,3-diketo groups with the π-system of calix[4]arene is revealed for both calixarenes. Analysis of complexes formed by the ligands using the UV–Vis and NMR diffusion methods in combination with DFT calculations makes it possible to identify differences in the modes of complex formation of di- and tetrapropoxy subsituted ligands. It is demonstrated that a more enhanced sensibilization of Eu3+-luminescence in complexes with dipropoxy-calix[4]arene compared to that for complexes with tetrapropoxy-counterpart correlates with the formation of a tetrameric structure, in which the binding of Eu3+ ions does not disturb the conjugation of 1,3-diketonate moieties with aromatic calix[4]arene fragments. This is quite different from the significant disturbance of conjugation during intramolecular bis-chelation of Eu3+ ion by 1,3-diketo groups of tetraalkyl subsituted ligand.

Research on modeling the lignin waste molecular structure and pyrolytic reactions using ReaxFF MD method

The lack of clarity in characterizing the chemical structure model of lignin waste hinders the comprehensive understanding of its pyrolysis reaction mechanism. The characterization results revealed that the de–alkalized lignin sample contained larger amounts of aliphatic and aromatic carbons compared to carbonyl carbons. Additionally, the aliphatic carbon molecules exhibited a higher presence of oxygenated carbons. The degree of aromaticity (fa) was determined to be 63.93 %. The resulting single–molecule structural model exhibited a molecular formula of C33H26O11 and a molecular weight of 598.56. Furthermore, the evolutions patterns and formation pathways of primary volatile components (H2, CH4, CO, and CO2) in pyrolysis reactions were revealed. The number of H2 molecules exhibited a positive correlation with the rise in pyrolysis reaction temperature. CH4 molecules exhibited a pattern of initially increasing and subsequently decreasing. The number of CO molecules exhibited a positive correlation with the rise in pyrolysis temperature. Conversely, the number of CO2 molecules demonstrated an initial increase followed by a decrease as the pyrolysis temperature increased. Finally, the generation pathway analysis of pyrolysis products shows that the H2 molecule is composed of two hydrogen atoms bonded together that have been dissociated from the carboxyl group. Alternatively, it can be produced through hydrogenation reactions involving hydrogen atoms detached from the carboxyl group and methyl groups. CH4 is primarily generated through the reaction between –CH3 and free hydrogen ions. CO is primarily produced through the cleavage of the carbonyl group. CO2 is primarily produced through the cleavage of carboxyl and ester groups.

1.3 Å Crystal Structure of E. coli Peptidyl-Prolyl Isomerase B with Uniform Substitution of Valine by (2S,3S)-4-Fluorovaline Reveals Structure Conservation and Multiple Staggered Rotamers of CH2F Groups.

(2S,3S)-4-Fluorovaline (FVal) is an analogue of valine, where a single CH3 group is substituted by a CH2F group. In the absence of valine, E. coli valyl-tRNA synthetase uses FVal as a substitute, enabling the production of proteins uniformly labeled with FVal. Here, we describe the production and analysis of E. coli peptidyl-prolyl isomerase B where all 16 valine residues have been replaced by FVal synthesized with a 13C-labeled CH2F group. Although the melting temperature is lower by about 11 °C relative to the wild-type protein, the three-dimensional protein structure is almost completely conserved, as shown by X-ray crystallography. The CH2F groups invariably populate staggered rotamers. Most CH2F groups populate two different rotamers. The increased space requirement of fluorine versus hydrogen does not prohibit rotamers that position fluorine next to a backbone carbonyl carbon. 19F NMR spectra show a signal dispersion over 25 ppm. The most high-field shifted 19F resonances correlate with large 3JHF coupling constants, confirming the impact of the γ-gauche effect on the signal dispersion. The present work is the second experimental verification of the effect and extends its validity to fluorovaline. The abundance of valine in proteins and structural conservation with FVal renders this valine analogue attractive for probing proteins by 19F NMR spectroscopy.

Novel insights into photoaging mechanisms and environmental persistence risks of polylactic acid (PLA) microplastics: Direct and indirect photolysis

Polylactic acid (PLA), as a biodegradable plastic, exhibits high sensitivity to ultraviolet (UV) radiation, yet the mechanisms and environmental risks of its photoaging remain unclear. This study uses quantum chemical calculations (DFT and TD-DFT) and kinetic simulations to explore the direct and indirect photoaging of PLA. Direct photoaging indicates that the highest oscillator intensity absorption peaks occurred at 172 and 246 nm, corresponding to the 13th singlet (S13) and 48th triplet (T48) states, thereby initiating the Norrish I and Norrish II mechanisms. The innovative “electron-hole” technology effectively clarifies the variations in photoaging mechanisms under different wavelengths. Indirect photoaging involves multiple reactive oxygen species (ROS) like •OH, 1O2, •O2−, and •HO2. The study confirms the anhydride production hypothesis and proposes two novel •OH-induced mechanisms: carbonyl carbon addition and branched methyl hydrogen dehydrogenation. Both mechanisms are thermodynamically advantageous, but their products pose potential environmental risks. ROS species and concentrations impact both PLA's photoaging mechanisms and environmental persistence. Low •OH concentration in northeast China, especially in winter, suggests a significant photoaging risk. This study offers pioneering insights into photoaging mechanisms and emphasizes the pivotal role of ROS, offering recommendations for managing PLA environmental impacts and fates in China.

Comparison of the Efficiency of B-O and B-C Bond Formation Pathways in Borane-Catalyzed Carbene Transfer Reactions Using α-Diazocarbonyl Precursors: A Combined Density Functional Theory and Machine Learning Study.

Lewis acidic boranes, especially tris(pentafluorophenyl)borane [B(C6F5)3], have emerged as metal-free catalysts for carbene transfer reactions of α-diazocarbonyl compounds in a variety of functionalization reactions. The established mechanism for how borane facilitates carbene generation for these compounds in the scientific community is based on the formation of a B-O (C=O) intermediate (path O). Herein, we report an extensive DFT study that challenges the notion of a ubiquitous path O, revealing that B-C(=N=N) bond formation (path C) for certain diazocarbonyl substrates proves to be the preferred pathway. This study elucidates, through the introduction of 22 various substituents on each side of the α-diazocarbonyl backbone, how the electron-donating and -withdrawing properties of substituents influence the competition between these B-O and B-C pathways. To elucidate the impact of the electronic features of diazo substrates on the competition between the O and C pathways in the studied dataset, we employed a machine learning approach based on the Random Forest model. This analysis revealed that substrates with higher electron density on the diazo-attached carbon, lower electron density on the carbonyl carbon, and more stable HOMO orbitals tend to proceed via path C. Furthermore, this study not only demonstrates that borane efficiency in facilitating N2 release is greatly affected by the nature of substituents on both sides of the α-diazocarbonyl functionality but also shows that for some substrates, borane is incapable of catalyzing the release of molecular nitrogen.

Controlled Ring-Opening Polymerization of Methyl Glycolide with Bifunctional Organocatalyst.

A bifunctional thiourea-amine-based organocatalyst (Takemoto's catalyst), employing a metal-free approach, is presented for the regioselective ring-opening polymerization (ROP) of optically active (D and L) methyl glycolide (MG). In this study, a chiral version of Takemoto's catalyst efficiently promotes the ROP of MG at room temperature, yielding poly(lactic-co-glycolic acids) (PLGAs) with predicted molecular weights and narrow polydispersity indices (PDI≤1.2). These PLGAs exhibit highly alternating structures without transesterification, as confirmed by 1H NMR, SEC, and MALDI-TOF analyses. Additionally, various macromolecular architectures, including linear and star-shaped PLGAs, were successfully synthesized using corresponding multi-functional alcohol initiators while maintaining the same alternating structures and regioselectivity with PLGA obtained from benzyl alcohol as initiator. Computational studies were conducted to elucidate the mechanism of alternating PLGA formation, revealing two key transition states (TSs): TS-1, which implicates the nucleophilic attack of the hydroxyl group of the initiator or propagating chain on the carbonyl carbon of MG, and TS-2, which involves the subsequent ring-opening of the cyclic ester. The results indicate that ring-opening occurs at both the glycolyl and lactyl sites, with a preference for the glycolyl site, as supported by experimental results. The resulting atactic PLGAs are amorphous, rendering them suitable for drug delivery applications.

Determination of solid-state acidity of lyophilized trehalose containing citrate, phosphate, and histidine buffers using UV/VIS diffuse reflectance and solid-state NMR spectroscopy

Changes in the protonation state of lyophilized proteins can impact structural integrity, chemical stability, and propensity to aggregate upon reconstitution. When a buffer is chosen, the freezing/drying process may result in dramatic changes in the protonation state of the protein due to ionization shift of the buffer. In order to determine whether protonation shifts are occurring, ionizable probes can be added to the formulation. Optical probes (dyes) have shown dramatic ionization changes in lyophilized products, but it is unclear whether the pH indicator is uniform throughout the matrix and whether the change in the pH indicator actually mirrors drug ionization changes. In solid-state NMR (SSNMR) spectroscopy, the chemical shift of the carbonyl carbon in carboxylic acids is very sensitive to the ionization state of the acid. Therefore, SSNMR can be used to measure ionization changes in a lyophilized matrix by employing a small quantity of an isotopically-labeled carboxylic acid species in the formulation. This paper compares the apparent pH of six trehalose-containing lyophilized buffer systems using SSNMR and UV-Vis diffuse reflectance spectroscopy (UVDRS). Both SSNMR and UVDRS results using two different ionization probes (butyric acid and bromocresol purple, respectively) showed little change in apparent acidity compared to the pre-lyophilized solution in a sodium citrate buffer, but a greater change was observed in potassium phosphate, sodium phosphate, and histidine buffers. While the trends between the two methods were similar, there were differences in the numerical values of equivalent pH (pHeq) observed between the two methods. The potential causes contributing to the differences are discussed.

Understanding the Electronic Effects of Lewis Acid Catalysts in Accelerating Polar Diels-Alder Reactions.

The electronic effects of Lewis acid (LA) catalysts in reducing the activation energies of polar Diels-Alder (P-DA) reactions have been studied within Molecular Electron Density Theory. To this end, a quantum topological energy partitioning scheme, namely, the Relative Interacting Atomic Energy (RIAE) analysis, is applied to the transition state structures (TSs) and the ground state of the reagents of two different LA-catalyzed P-DA reactions. Analyses of the ξEtotalX total energies of the two interacting frameworks f(X) show that the electronic energy stabilization of the electrophilic frameworks, resulting from the global electron density transfer (GEDT), is the cause of an effective decrease of the activation energies. On the other hand, an in-depth analysis of the ξEintraA intra-atomic energies of the atoms belonging to the electrophilic ethylenic framework in the LA-catalyzed P-DA reactions of cyclopentadiene with acrolein indicates that the strong electronic stabilization of the carbonyl carbon, resulting from the GEDT taking place at the TSs, is the main factor responsible for the decrease of the activation energies in these LA-catalyzed P-DA reactions. Finally, the increase in GEDT at the TSs of these P-DA reactions causes an increase in the larger C-C distance, resulting from the stabilization of the electrophilic framework, thereby decreasing the suggested Pauli repulsion.

Characteristics and competitive mechanisms of polycondensation and cyclization induced by end‐groups in polyamide 6 melt

AbstractPolycondensation and ring‐formation reactions are the main factors that cause instability in the molecular structure of commercial polyamide 6 (PA6) during melting. In this study, the mechanisms and interactions of the ring‐formation and polycondensation reactions induced by various factors were thoroughly investigated. The findings suggest that the average molecular weight of PA6 increased by 20.4% during melting. The total monomer and oligomer content increased by 79.2%, and the ring‐forming reaction was promoted with an increase in temperature. Moreover, a high concentration of the end‐amino in PA6 promoted the ring‐forming reaction, whereas similar concentrations of the end‐amino and end‐carboxyl groups were more conducive to the polycondensation reaction. In short, the nitrogen atoms in the end‐amino group on the PA6 molecular chain attack the carbonyl carbon at different sites, including the carbonyl carbon in the amide bond and the carbonyl carbon in the end‐carboxyl group, which is the key to the strength of the ring‐formation and polycondensation reactions.

Catalytic Atroposelective Synthesis of C-N Axially Chiral Aminophosphines via Dynamic Kinetic Resolution.

A ruthenium-catalyzed reductive amination via asymmetric transfer hydrogenation (ATH) has been used to perform an efficient dynamic kinetic resolution (DKR) of N-aryl 2-formyl pyrroles decorated with a phosphine moiety positioned at the ortho' position. The strategy relies on the labilization of the stereogenic axis in the substrate facilitated by a transient Lewis acid-base interaction (LABI) between the carbonyl carbon and the phosphorus center. The reaction features broad substrate scope of aliphatic amines and N-aryl pyrrole scaffolds, and proceeds under very mild conditions to afford P,N atropisomers in good to high yields and excellent enantioselectivities (up to 99 % ee) for both diphenyl and dicyclohexylphosphino derivatives.

Catalytic Atroposelective Synthesis of C−N Axially Chiral Aminophosphines via Dynamic Kinetic Resolution

AbstractA ruthenium‐catalyzed reductive amination via asymmetric transfer hydrogenation (ATH) has been used to perform an efficient dynamic kinetic resolution (DKR) of N‐aryl 2‐formyl pyrroles decorated with a phosphine moiety positioned at the ortho’ position. The strategy relies on the labilization of the stereogenic axis in the substrate facilitated by a transient Lewis acid‐base interaction (LABI) between the carbonyl carbon and the phosphorus center. The reaction features broad substrate scope of aliphatic amines and N‐aryl pyrrole scaffolds, and proceeds under very mild conditions to afford P,N atropisomers in good to high yields and excellent enantioselectivities (up to 99 % ee) for both diphenyl and dicyclohexylphosphino derivatives.

Rotating Disk Electrode Studies of Benzaldehyde Oxidation on Group Ib Metals

Water electrolysis is a green means of producing hydrogen gas to be used as a fuel or reactant in key industrial processes such as ammonia production. The conventional system of oxygen evolution (OER) and hydrogen evolution (HER) suffers from slow kinetics at the anode and a high cell voltage limited by thermodynamics. One solution is to replace OER with another reaction such as an organic oxidation reaction that has a lower equilibrium potential and produces a valuable organic byproduct at the anode. Recent work has demonstrated that biomass-derived aldehydes such as furfural and 5-hydroxymethylfurfural can be selectively oxidized to their corresponding carboxylates and H2 on Cu-based anodes at low potentials (~0.1 VRHE) in alkaline media. In alkaline media, a hydroxide ion adds to the carbonyl carbon of an aldehyde molecule forming a gem diolate in solution phase. It is argued that dehydrogenation becomes more facile due to the weaker C-H bond of the gem diolate compared to the aldehyde form of the molecule. This may enable oxidation without the need for coadsorbed-OH. Additionally, aldehyde oxidation is only active on Au, Ag, and Cu electrodes at higher pHs.The aim of this work is to identify the conditions under which low potential oxidation of aldehydes and high anodic Faradaic efficiency to H2 occurs, namely, electrode material and applied potential. To avoid polymerization side reactions of furans in alkaline media, we studied benzaldehyde as a model compound which has also been shown to exhibit low potential oxidation and anodic H2. The activity (rate of aldehyde consumption) and selectivity (to anodic H2 versus H2O) were compared for the group Ib metals (Au, Ag, Cu), each of which demonstrates a relatively early onset potential (<0.4 VRHE) and generates anodic H2 at certain potentials. Rotating disk electrode studies with Koutecky-Levich analysis were conducted to separate mass transfer effects from kinetic current to compare the intrinsic activity of each electrode. Additionally, the average number electrons transferred per aldehyde molecule consumed was estimated from Koutecky-Levich analysis; the one-electron pathway combines the aldehyde hydrogens to H2 while the two-electron pathway requires an additional electron per aldehyde molecule to oxidize the hydrogen from the surface to form H2O. Rotating ring disk electrode studies were used to further validate the anodic H2 generation as a Pt ring was still able to oxidize H2 despite the presence of benzaldehyde. This was used as an additional means of estimating the selectivity to H2 as a function of potential.CVs for benzaldehyde oxidation on each metal are shown in Figure a. Peak current followed the order of Au > Ag >> Cu. Au reached a mass transfer limiting current, and Ag also showed an RPM dependence but did not reach full mass transfer limitations. Cu was the least active and did not show any mass transfer dependence. On the other hand, Cu has the earliest onset potential followed by Ag then Au. The average number of electrons transferred per aldehyde molecule according to RRDE measurements is shown in Figure b, where one electron represents H2 and two electrons represents H-oxidation to H2O. Cu had 100% selectivity to H2 over its entire potential window of activity (up to 0.45 VRHE). Au and Ag have high selectivity to H2 at low potentials but decreases to near zero H2 production in the range of 0.6-0.8 VRHE; the decrease in selectivity to H2 on Ag occurs slightly earlier than Au (~0.1 V). H2 selectivity is related to the inability of each metal to oxidize H to H2O at low potentials. Figure 1

Newly synthesised diglycolamide functionalised silica gel with terminal 2-ethylhexyl alkyl chain, Silica-DGA (2EH) having high ligand density for adsorption of trivalent actinide and lanthanide from acidic medium

A novel diglycolamide resin with 2-ethylhexyl terminal alkyl chain functionalised to silica gel was synthesised and characterised by ATR-FTIR, SEM, TG/DSC, &13C (CP/MAS) solid state NMR techniques. Effective functionalization of the organic ligand upon silica gel was confirmed from the two carbonyl stretching frequencies at 1735 cm−1 and 1619 cm−1 in the FTIR spectrum and carbonyl carbon atom signal at 170 ppm in 13C (CP/MAS) solid state NMR spectrum. Thermo gravimetric measurement showed 17.3 ± 0.2 % (W/W) weight loss corresponding to the ligand loading value of 425 µmol/g. The resin showed very high uptake of trivalent lanthanide and actinide ions from 4.0 M HNO3 medium and very low distribution of Cs & Sr; Kd ∼ 1.1×103 mL/g for Am(III), ∼ 1.41×103 mL/g for Eu(III), ∼2.5 mL/g for Sr and 1.53 mL/g for Cs. FTIR spectroscopic study of the Eu3+ adsorbed resin showed single carbonyl stretching frequency at 1654 cm−1, instead of the two carbonyl stretching frequencies in fresh silica-DGA(2EH) resin indicating complexation through carbonyl oxygen. Very low Kd of ∼1.2–5.1 mL/g for lanthanides/actinides from 4.0 M HNO3 containing water soluble DGA namely N, N, N, N, Tetraethyldiglycolamide (TEDGA) in the concentration range 0.3–0.1 M indicates 99 % back adsorption feasibility.

Flexible porous non-woven silk fabric based conductive composite for efficient multimodal sensing

Silk-based conductive composites have attracted much attention for applications in flexible smart electronics. However, silk-based conductive composites that combine high air permeability, Joule heat management, electromagnetic interference (EMI) shielding and multimodal responsiveness are still challenging. In this paper, flexible porous non-woven silk fabric (nSF)-based conductive composites with the aforementioned properties are designed and developed by a freeze-induced assembly and surface micro-dissolution adhesion (FASMA) process to introduce carbonyl carbon nanotubes (C-CNTs), MXene and thermoplastic polyurethanes (TPU) into the inter-fiber network structure of nSF, with the aim of constructing a high-performance multimodal sensing platform. Functioning as a flexible strain sensor, the nSF-based composite can detect strains as low as 0.05 % with rapid response and recovery time of 125 ms and 146 ms, respectively, and can be used to detect full-size human motion signals. The nSF-based composite has a good humidity response at 0–85 % relative humidity (RH) and a sensitive and reliable thermal response. In additionally, the nSF-based composites also have Joule heat management and EMI shielding functions. All these multi-functional applications demonstrate the advantages of the prepared flexible porous nSF-based composites in the field of flexible smart electronics.

Atomic Electrostatic Potential as a Descriptor of Aminolysis of Phenyl and Thiophenyl Acetates and Hydrolysis of Acetanilides

Abstract: Hydrolysis of acetanilides and aminolysis of phenyl and thiophenyl acetates are related reactions since these are processes of nucleophilic substitution on the carbonyl carbon. Current views of chemical reactivity based on the DFT theory rely upon reactivity indices that are descriptors of both the reaction center and the molecule as a whole, and have not been applied to the given processes before. One of such descriptors is an atomic electrostatic potential. The given parameter was calculated by the DFT theory M06/6-311+G (non-specific solvation, MeCN, SMD, and full optimization) for the structures of substituted phenyl acetates XPhO-C(O)Me, acetanilides XPhNHC(O)Me, thiophenyl acetates ZPhSC(=O)Me, and benzyl amines XPhСH2NH2 (X, Z substituents). It has been found that all relationships between the atomic electrostatic potential, the charge on the reaction center in the Hirshfeld scheme, and logK are symbatic. Consequently, in all of the cases, the rate is determined by the nucleophilic attack on the reaction center, with the activity/selectivity relationship being observed. The fact that the reaction rate is limited by the nucleophilic attack of the reagent is not inconsistent with the views of the reaction being concerted, since it is known that such reactions may be quite concerted though not quite synchronous.

Characteristics of biodepolymerized coal and insights into depolymerization pathway catalyzed by fungal extracellular enzymes

ABSTRACT The bio-depolymerization of coal is a promising technology for converting coal into low-molecular-weight industrial chemicals. In this study, we investigated the characteristics of biodepolymerized coal (BDC) and the associated depolymerization pathway. We analyzed the extracellular enzyme activities of Hypocrea lixii AH in the biodepolymerization system, performed Fourier transform infrared spectroscopy (FTIR) and 13C nuclear magnetic resonance spectroscopy (NMR) of BDC, and performed gas chromatography and mass spectrometry (GC/MS) of the BDC methanol extract. Results showed that the activities of peroxidase (POD), polyphenol oxidase (PPO), laccase (Lac), and lignin peroxidase (LiP) were 1377, 162, 10, and 1.919 U, respectively. Following biodepolymerization by Hypocrea lixii AH, 20 organic compounds were identified. Benzaldehyde 4-hydroxy-3,5-dimethoxy was the most dominant at 33.16%, followed by (Z)-9-octadecenamide, accounting for 14.73%. The aromaticity (f a) decreased from 54.3% to 23.7%, suggesting ring-opening reactions catalyzed by LiP and Lac. The ratio of carbonyl carbon (f a C) increased from 8.3% to 16.2%, suggesting oxidation reactions catalyzed by POD. By comparing the structure of the Fushun oxidized coal model and BDC, a biodepolymerization pathway was elucidated. Biodepolymerization of Fushun oxidized coal is an oxidation–depolymerization process catalyzed by a series of enzymes, which breaks the aromatic rings and oxidizes side chains. Altogether, our findings provide a theoretical support for the chemical application of BDC.

Unveiling the transformation of organics in leachate during the composite anode-supported electro-hybrid ozonation-coagulation (CA-E-HOC) treatment: Significance of synergy among chlorine, coagulant, and ozone

Ozone and its advanced oxidation processes are commonly used to remove organics from leachate because of their high efficiency in eliminating toxic and resistant compounds. However, the mechanisms underlying the transformations of these organic compounds remain unclear. This study aimed to investigate the organic transformation during the composite anode (CA)-supported electro-hybrid ozonation-coagulation (CA-E-HOC) treatment of leachate, where chlorine and coagulants were coproduced on CA for ozone activation, to gain a deeper understanding of the synergistic effects when chlorine, coagulant, and ozone are simultaneously present within a single unit for leachate treatment. Reactive oxygen species and reactive chlorine species in the CA-E-HOC facilitated the degradation of unsaturated and aromatic compounds into hydrophilic organic chains or mineralisation to CO2/H2O. The aromatic carbon (C=C) and long-chain aliphatic carbon (C-C) are converted to carbonyl carbon (O-C=O), which is easily degraded by microorganisms during the subsequent treatment process. The reactive chlorine species and ozone molecules transform CHOS into CHO through −S and −SH2, whereas •OH converts CHNOS into CHNO. The enriched CHO substances were further converted into saturated fatty acids and carbohydrates through oxidation reactions (+O), making them more susceptible to conversion into CO2 and H2O by interacting with •OH and Cl•/ClO•, ultimately resulting in organic mineralisation. This study contributes to a better understanding of molecular changes in organics during leachate treatment using the CA-E-HOC process, with potential implications for practical applications.