Carbon Source Research Articles

Carbon substrates promotes stress resistance and drug tolerance in clinical isolates of Candida tropicalis.

Candida tropicalis is a human pathogen and one of the most prevalent non-Candida albicans Candida (NCAC) species causing invasive infections. Azole antifungal resistance in C. tropicalis is also gradually increasing with the increasing incidence of infections. The pathogenic success of C. tropicalis depends on its effective response in the host microenvironment. To become a successful pathogen, cellular metabolism, and physiological status determine the ability of the pathogen to counter diverse stresses inside the host. However, to date, limited knowledge is available on the impact of carbon substrate metabolism on stress adaptation and azole resistance in C. tropicalis. In this study, we determined the impact of glucose, fructose, and sucrose as the sole carbon source on the fluconazole resistance and osmotic (NaCl), oxidative (H2O2) stress adaptation in C. tropicalis clinical isolates. We confirmed that the abundance of carbon substrates influences or increases drug resistance and osmotic and oxidative stress tolerance in C. tropicalis. Additionally, both azole-resistant and susceptible isolates showed similar stress adaptation phenotypes, confirming the equal efficiency of becoming successful pathogens irrespective of drug susceptibility profile. To the best of our knowledge, our study is the first on C. tropicalis to demonstrate the direct relation between carbon substrate metabolism and stress tolerance or drug resistance.

Relating the carbon sources to denitrifying community in full-scale wastewater treatment plants.

Carbon source is a key factor determining the denitrifying effectiveness and efficiency in wastewater treatment plants (WWTPs). Whereas, the relationships between diverse and distinct denitrifying communities and their favorable carbon sources in full-scale WWTPs were not well-understood. This study performed a systematic analysis of the relationships between the denitrifying community and carbon sources by using 15 organic compounds from four categories and activated sludge from 8 full-scale WWTPs. Results showed that, diverse denitrifying bacteria were detected with distinct relative abundances in 8 WWTPs, such as Haliangium (1.98-4.08%), Dechloromonas (2.00-3.01%), Thauera (0.16-1.06%), Zoogloea (0.09-0.43%), and Rhodoferax (0.002-0.104%). Overall, acetate resulted in the highest denitrifying activities (1.21 to 4.62 mg/L/h/gMLSS), followed by other organic acids (propionate, butyrate and lactate, etc.). Detectable dissimilatory nitrate reduction to ammonium (DNRA) was observed for all 15 carbon sources. Methanol and glycerol resulted in the highest DRNA. Acetate, butyrate, and lactate resulted in the lowest DNRA. Redundancy analysis and 16S cDNA amplicon sequencing suggested that carbon sources within the same category tended to correlate to similar denitrifiers. Methanol and ethanol were primarily correlated to Haliangium. Glycerol and amino acids (glutamate and aspartate) were correlated to Inhella and Sphaerotilus. Acetate, propionate, and butyrate were positively correlated to a wide range of denitrifiers, explaining the high efficiency of these carbon sources. Additionally, even within the same genus, different amplicon sequence variants (ASVs) performed distinctly in terms of carbon source preference and denitrifying capabilities. These findings are expected to benefit carbon source formulation and selection in WWTPs.

Highly bifunctional Rh2P on N,P-codoped carbon for hydrazine oxidation assisted energy-saving hydrogen production.

Highly pure Rh2P nanoparticles on N,P-codoped carbon were synthesized by a simple "mix-and-pyrolyze" method using one kind of low-cost nucleotide as the carbon, nitrogen and phosphorus source, which exhibits excellent bifunctional activity for the hydrogen reduction and hydrazine oxidation reactions, achieving energy-efficient hydrogen production.

Comparative analysis of prokaryotic microbiomes in high-altitude active layer soils: insights from Ladakh and global analogues using In-Silico approaches.

The active layer is the portion of soil overlaying the permafrost that freezes and thaws seasonally. It is a harsh habitat in which a varied and vigorous microbial population thrives. The high-altitude active layer soil in northern India is a unique and important cryo-ecosystem. However, its microbiology remains largely unexplored. It represents a unique reservoir for microbial communities with adaptability to harsh environmental conditions. In the Changthang region of Ladakh, the Tsokar area is a high-altitude permafrost-affected area situated in the southern part of Ladakh, at a height of 4530m above sea level. Results of the comparison study with the QTP, Himalayan, Alaskan, Russian, Canadian and Polar active layers showed that the alpha diversity was significantly higher in the Ladakh and QTP active layers as the environmental condition of both the sites were similar. Moreover, the sampling site in the Ladakh region was in a thawing condition at the time of sampling which possibly provided nutrients and access to alternative nitrogen and carbon sources to the microorganisms thriving in it. Analysis of the samples suggested that the geochemical parameters and environmental conditions shape the microbial alpha diversity and community composition. Further analysis revealed that the cold-adapted methanogens were present in the Ladakh, Himalayan, Polar and Alaskan samples and absent in QTP, Russian and Canadian active layer samples. These methanogens could produce methane at slow rates in the active layer soils that could increase the atmospheric temperature owing to climate change.

Effects of spruce budworm defoliation on in-stream algal production and carbon use by food webs

Insect defoliation is a widespread cause of forest disturbance in Canada, and it has the potential to alter terrestrial carbon contributions to stream consumers and thus affect stream ecosystems. Although defoliation by spruce budworms ( Choristoneura fumiferana) is considered a natural disturbance with importance to forest succession, the magnitude and duration of outbreaks are increasing, and there is a growing need to understand their downstream consequences. To examine this, algal productivity and autochthonous (in-stream) energy supporting macroinvertebrate and fish consumers (using δ13C, δ15N) were examined in 12 streams in the Gaspé Peninsula, Québec, Canada, that ranged in watershed defoliation from spruce budworm. Hierarchical partitioning models were used to assess the contributions of watershed and stream variables to these endpoints. Total seasonal algal production ranged fourfold among sites, and cumulative defoliation was the strongest predictor. Consumers from streams with greater defoliation (cumulative or annual) had lower reliance on autochthonous carbon, despite increased algal production, and this effect was greater for brook trout than macroinvertebrates. These findings demonstrate for the first time that insect outbreaks—which alter forest structure and function—also similarly affect downstream aquatic ecosystems by causing changes in the production and contributions of carbon sources. This suggests that insect control strategies and forest management decisions should also consider implications for downstream aquatic ecosystems.

Physiological basis for atmospheric methane oxidation and methanotrophic growth on air.

Atmospheric methane oxidizing bacteria (atmMOB) constitute the sole biological sink for atmospheric methane. Still, the physiological basis allowing atmMOB to grow on air is not well understood. Here we assess the ability and strategies of seven methanotrophic species to grow with air as sole energy, carbon, and nitrogen source. Four species, including three outside the canonical atmMOB group USCα, enduringly oxidized atmospheric methane, carbon monoxide, and hydrogen during 12 months of growth on air. These four species exhibited distinct substrate preferences implying the existence of multiple metabolic strategies to grow on air. The estimated energy yields of the atmMOB were substantially lower than previously assumed necessary for cellular maintenance in atmMOB and other aerobic microorganisms. Moreover, the atmMOB also covered their nitrogen requirements from air. During growth on air, the atmMOB decreased investments in biosynthesis while increasing investments in trace gas oxidation. Furthermore, we confirm that a high apparent specific affinity for methane is a key characteristic of atmMOB. Our work shows that atmMOB grow on the trace concentrations of methane, carbon monoxide, and hydrogen present in air and outlines the metabolic strategies that enable atmMOB to mitigate greenhouse gases.

Microplastic coupled with soil dissolved organic matter mediated changes in the soil chemical and microbial characteristics.

The abundance of microplastics (MPs) in soil environments has attracted significant attentions, due to their impact on soil physico-chemical properties. However, limited information is available on the influences of MPs on soil carbon composition and microbial utilization characteristics. Therefore, a two-month incubation experiment was conducted to add polyethylene microplastics (PE-MPs) with different levels (1%, 10%) and sizes (150-300 μm and 75-150 μm) into different soils. After that, soil chemical properties including the dissolved organic carbon (DOC), spectral characteristics of dissolved organic matter (DOM) and soil microbial characteristics were analyzed. Results revealed that PE-MPs addition caused significant differences in soil chemical properties between farmland and woodland soils, particularly in soil pH, DOM composition, and soil phosphatase activity. Woodland soil always exhibited higher levels of DOC content, microbial diversity, and soil carbon source utilization compared to farmland soil, leading to increased humification in the DOM of woodland soil. PE-MPs with a larger particle size significantly increased both the soil DOC content and enzyme activity. Addition of PE-MPs altered the soil DOM composition, and the fluorescence parameters like the biological index (BIX) and humification degree. Moreover, the carbon source utilization intensity of microorganisms on PE MPs-contaminated soils is higher in woodland soils. Various analyses confirmed that compared to other soil properties, characteristics of soil DOM had a more significant impact on soil microbial community composition. Thus, PE-MPs in conjunction with soil DOM spectral characteristics regulated soil microbial diversity, which is crucial for understanding soil carbon sequestration.

Untargeted metabolomics coupled with genomics in the study of sucrose and xylose metabolism in Pectobacterium betavasculorum

IntroductionPectobacterium betavasculorum is a member of the Pectobacerium genus that inhabits a variety of niches and is found in all climates. Bacteria from the Pectobacterium genus can cause soft rot disease on various plants due to the secretion of plant cell wall degrading enzymes (PCWDEs). The species P. betavasculorum is responsible for the vascular necrosis of sugar beet and soft rot of many vegetables. It also infects sunflowers and artichokes. The main sugar present in sugar beet is sucrose while xylose is one of the main sugars in artichoke and sunflower.MethodsIn our work, we applied metabolomic studies coupled with genomics to investigate the metabolism of P. betavasculorum in the presence of xylose and sucrose as the only carbon source. The ability of the strains to use various sugars as the only carbon source were confirmed by the polypyridyl complex of Ru(II) method in 96-well plates.ResultsOur studies provided information on the metabolic pathways active during the degradation of those substrates. It was observed that different metabolic pathways are upregulated in the presence of xylose in comparison to sucrose.DiscussionThe presence of xylose enhances extracellular metabolism of sugars and glycerol as well as stimulates EPS and IPS synthesis. In contrast, in the presence of sucrose the intensive extracellular metabolism of amines and amino acids is promoted.

Citrate-buffered Yamanaka medium allows to produce high-yield bacterial nanocellulose in static culture using Komagataeibacter strains isolated from apple cider vinegar

Bacterial nanocellulose (BNC) is a sustainable, renewable, and eco-friendly nanomaterial, which has gained great attentions in both academic and industrial fields. Two bacterial nanocellulose-producing strains (CVV and CVN) were isolated from apple vinegar sources, presenting high 16S rRNA gene sequence similarities (96%–98%) with Komagataeibacter species. The biofilm was characterized by scanning electron microscopy (SEM), revealing the presence of rod-shaped bacteria intricately embedded in the polymeric matrix composed of nanofibers of bacterial nanocellulose. FTIR spectrum and XRD pattern additionally confirmed the characteristic chemical structure associated with this material. The yields and productivities achieved during 10 days of fermentation were compared with Komagataeibacter xylinus ATCC 53524, resulting in low levels of BNC production. However, a remarkable increase in the BNC yield was achieved for CVV (690% increase) and CVN (750% increase) strains at day 6 of the fermentation upon adding 22 mM citrate buffer into the medium. This effect is mainly attributed to the buffering capacity of the modified Yakamana medium, which allowed to maintain pH close to 4.0 until day 6, though in combination with additional factors including stimulation of the gluconeogenesis pathway and citrate assimilation as a carbon source. In addition, the productivities determined for both isolated strains (0.850 and 0.917 g L−1 d−1) compare favorably to previous works, supporting current efforts to improve fermentation performance in static cultures and the feasibility of scaling-up BNC production in these systems.

The Role of Ocean Mesoscale Variability in Air‐Sea CO2 Exchange: A Global Perspective

AbstractOcean mesoscale flows significantly influence nutrient distribution and biological productivity, yet the scarcity of eddy‐permitting observational data sets and climate modeling hinders understanding their role in carbon sequestration. Using an eddy‐resolving global simulation, this study investigates the significance of ocean mesoscales in air‐sea carbon dioxide (CO2) exchange. Results show over 30% of CO2 flux variance in energetic regions attributed to flows with horizontal scales smaller than 2°. Mesoscale flows can drive a cumulative CO2 flux that is either a net carbon sink or source depending on region, with magnitudes on the order of 105 tonnes of carbon per year. Variations in this mesoscale‐related CO2 flux are correlated with local relative vorticity and the background gradient of ocean partial pressure of CO2. This analysis underscores the importance of considering ocean mesoscales in monitoring carbon flux, highlighting the need to explore the influence of increasing eddy activity on carbon uptake in a changing climate.

Construction of an enzyme-constrained metabolic network model for Myceliophthora thermophila using machine learning-based kcat data

BackgroundGenome-scale metabolic models (GEMs) serve as effective tools for understanding cellular phenotypes and predicting engineering targets in the development of industrial strain. Enzyme-constrained genome-scale metabolic models (ecGEMs) have emerged as a valuable advancement, providing more accurate predictions and unveiling new engineering targets compared to models lacking enzyme constraints. In 2022, a stoichiometric GEM, iDL1450, was reconstructed for the industrially significant fungus Myceliophthora thermophila. To enhance the GEM’s performance, an ecGEM was developed for M. thermophila in this study.ResultsInitially, the model iDL1450 underwent refinement and updates, resulting in a new version named iYW1475. These updates included adjustments to biomass components, correction of gene-protein-reaction (GPR) rules, and a consensus on metabolites. Subsequently, the first ecGEM for M. thermophila was constructed using machine learning-based kcat data predicted by TurNuP within the ECMpy framework. During the construction, three versions of ecGEMs were developed based on three distinct kcat collection methods, namely AutoPACMEN, DLKcat and TurNuP. After comparison, the ecGEM constructed using TurNuP-predicted kcat values performed better in several aspects and was selected as the definitive version of ecGEM for M. thermophila (ecMTM). Comparing ecMTM to iYW1475, the solution space was reduced and the growth simulation results more closely resembled realistic cellular phenotypes. Metabolic adjustment simulated by ecMTM revealed a trade-off between biomass yield and enzyme usage efficiency at varying glucose uptake rates. Notably, hierarchical utilization of five carbon sources derived from plant biomass hydrolysis was accurately captured and explained by ecMTM. Furthermore, based on enzyme cost considerations, ecMTM successfully predicted reported targets for metabolic engineering modification and introduced some new potential targets for chemicals produced in M. thermophila.ConclusionsIn this study, the incorporation of enzyme constraint to iYW1475 not only improved prediction accuracy but also broadened the model’s applicability. This research demonstrates the effectiveness of integrating of machine learning-based kcat data in the construction of ecGEMs especially in situations where there is limited measured enzyme kinetic parameters for a specific organism.

Optimized Feeding Strategies for Biosurfactant Production from Acetate by Alcanivorax borkumensis SK2

Biosurfactants are much-discussed alternatives to petro- and oleochemical surfactants. Alcanivorax borkumensis, a marine, Gram-negative γ-proteobacterium, produces a glycine-glucolipid biosurfactant from hydrocarbons, pyruvate, and acetate as carbon sources. Sustainable acetate production from lignocellulose or syngas adds to its relevance for the bioeconomy. This study investigated nitrogen sources and carbon-to-nitrogen ratios (C/N) to optimize fed-batch fermentation for biosurfactant production using A. borkumensis with acetate as the carbon source. Urea enabled high biosurfactant production, which was confirmed in DO-based fed-batch fermentation. Varying C/N ratios led to increased glycine-glucolipid production and decreased biomass production, with improvement plateauing at a C/N ratio of 26.7 Cmol Nmol−1. pH-stat fed-batch fermentation using glacial acetic acid as the carbon source and a pH-adjusting agent doubled the biosurfactant production. Finally, bubble-free membrane aeration was used to prevent extensive foam formation observed during conventional bubble aeration. The efficient production made it possible to investigate the bioactivity of glycine-glucolipid in combination with antibiotics against various microorganisms. Our findings allow for the leverage of glycine-glucolipid biosurfactant production using acetate as a carbon source.

Alpha-glucans from bacterial necromass indicate an intra-population loop within the marine carbon cycle

Phytoplankton blooms provoke bacterioplankton blooms, from which bacterial biomass (necromass) is released via increased zooplankton grazing and viral lysis. While bacterial consumption of algal biomass during blooms is well-studied, little is known about the concurrent recycling of these substantial amounts of bacterial necromass. We demonstrate that bacterial biomass, such as bacterial alpha-glucan storage polysaccharides, generated from the consumption of algal organic matter, is reused and thus itself a major bacterial carbon source in vitro and during a diatom-dominated bloom. We highlight conserved enzymes and binding proteins of dominant bloom-responder clades that are presumably involved in the recycling of bacterial alpha-glucan by members of the bacterial community. We furthermore demonstrate that the corresponding protein machineries can be specifically induced by extracted alpha-glucan-rich bacterial polysaccharide extracts. This recycling of bacterial necromass likely constitutes a large-scale intra-population energy conservation mechanism that keeps substantial amounts of carbon in a dedicated part of the microbial loop.

Performance Evaluation of Carbon-Neutral Cities Based on Fuzzy AHP and HFS-VIKOR

Climate change threatens human survival and development. Cities, as the main gathering places for human production and life, serve as the focal points for the implementation of the policies related to energy efficiency, energy transition, and environmental protection. This study constructs an index system for the evaluation of carbon-neutral cities from the perspectives of carbon sources and carbon sinks. The system includes thirteen indicators under six dimensions. It combines objective and subjective data (i.e., statistical data and expert evaluations) by integrating two approaches: the fuzzy analytic hierarchy process (fuzzy AHP) and vise kriterijumska optimizacija i kompromisno resenje with hesitant fuzzy sets (HFS-VIKOR). We verify the efficacy of the proposed approach through a case study of thirteen low-carbon pilot cities in China. The results indicate that among these cities, Shenzhen performs the best, followed by Guangzhou and Hangzhou, while Kunming, Baoding, and Tianjin show poor performance in terms of carbon neutrality. Kunming and Baoding exhibit shortcomings mainly in carbon sources, while Tianjin faces deficiencies in both carbon sources and carbon sinks. Sensitivity analysis and comparative analysis show the availability and effectiveness of the proposed method. The proposed radar chart further highlights the improvement directions for each city to achieve carbon neutrality.

Natural Polyhydroxyalkanoates—An Overview of Bacterial Production Methods

Polyhydroxyalkanoates (PHAs) are intracellular biopolymers that microorganisms use for energy and carbon storage. They are mechanically similar to petrochemical plastics when chemically extracted, but are completely biodegradable. While they have potential as a replacement for petrochemical plastics, their high production cost using traditional carbon sources remains a significant challenge. One potential solution is to modify heterotrophic PHA-producing strains to utilize alternative carbon sources. An alternative approach is to utilize methylotrophic or autotrophic strains. This article provides an overview of bacterial strains employed for PHA production, with a particular focus on those exhibiting the highest PHA content in dry cell mass. The strains are organized according to their carbon source utilization, encompassing autotrophy (utilizing CO2, CO) and methylotrophy (utilizing reduced single-carbon substrates) to heterotrophy (utilizing more traditional and alternative substrates).

Production and characterization of bacterial cellulose by Rhizobium sp. isolated from bean root

Bacterial cellulose (BC) is a natural polymer renowned for its unique physicochemical and mechanical attributes, including notable water-holding capacity, crystallinity, and a pristine fiber network structure. While BC has broad applications spanning agriculture, industry, and medicine, its industrial utilization is hindered by production costs and yield limitations. In this study, Rhizobium sp. was isolated from bean roots and systematically assessed for BC synthesis under optimal conditions, with a comparative analysis against BC produced by Komagataeibacter hansenii. The study revealed that Rhizobium sp. exhibited optimal BC synthesis when supplied with a 1.5% glucose carbon source and a 0.15% yeast extract nitrogen source. Under static conditions at 30 °C and pH 6.5, the most favorable conditions for growth and BC production (2.5 g/L) were identified. Modifications were introduced using nisin to enhance BC properties, and the resulting BC-nisin composites were comprehensively characterized through various techniques, including FE-SEM, FTIR, porosity, swelling, filtration, and antibacterial activity assessments. The results demonstrated that BC produced by Rhizobium sp. displayed properties comparable to K. hansenii-produced BC. Furthermore, the BC-nisin composites exhibited remarkable inhibitory activity against Escherichia coli and Pseudomonas aeruginosa. This study contributes valuable insights into BC’s production, modification, and characterization utilizing Rhizobium sp., highlighting the exceptional properties that render it efficacious across diverse applications.

Decreased mRNA expression of NR1H3 and ABCA1 in pulmonary tuberculosis patients from population of Punjab, India.

Mycobacterium tuberculosis (MTB) is the causative organism of tuberculosis. Cholesterol is a crucial carbon source required for the survival of MTB in host cells. Transcription factor NR1H3 along with its important target genes ABCA1 and ApoE play important role in removal of extra cholesterol from cells. Changes in the gene expression of NR1H3, ABCA1 and ApoE can affect cholesterol homeostasis and thus the survival of MTB in host cells.Therefore, the present study was designed to analyze the mRNA expression of NR1H3, ABCA1 and ApoE in pulmonary TB (PTB) patients from the population of Punjab, India. In this study, mRNA expression of the transcription factor NR1H3 and its target genes ABCA1 and ApoE was analyzed in 89 subjects, including 41 PTB patients and 48 healthy controls (HCs) by real-time quantitative PCR. It was found that the mRNA expression of both NR1H3 and ABCA1 genes was significantly lower in TB patients than in HCs (p < 0.001). Even after sex-wise stratification of the subjects, mRNA expression of NR1H3 and ABCA1 was found to be down-regulated in both male and female TB patients. No significant difference was observed in expression of ApoE (p = 0.98). The present study found that the mRNA expression of NR1H3 and ABCA1 is down-regulated in TB patients from Punjab state of India.

Optimization Studies of Anticancer Enzyme -asparaginase from Actinomycetes

Optimization Studies of Anticancer Enzyme -asparaginase from Actinomycetes

High-Level Bio-Based Production of Coproporphyrin in Escherichia coli

This study reports on the development of effective strain engineering strategies for the high-level bio-based production of coproporphyrin (CP), a porphyrin pigment compound with various applications, using Escherichia coli as a production host. Our approach involves heterologous implementation of the Shemin/C4 pathway in an E. coli host strain with an enlarged intracellular pool of succinyl-CoA. To regulate the expression of the key pathway genes, including hemA/B/D/E/Y, we employed a plasmid system comprising two operons regulated by strong trc and gracmax promoters, respectively. Using the engineered E. coli strains for bioreactor cultivation under aerobic conditions with glycerol as the carbon source, we produced up to 353 mg/L CP with minimal byproduct formation. The overproduced CP was secreted extracellularly, posing minimal physiological toxicity and impact on the producing cells. To date, targeted bio-based production of CP by E. coli has yet to be reported. In addition to the demonstration of high-level bio-based production of CP, our study underscores the importance of identifying key enzymatic reactions limiting the overall metabolite production for developing differential expression strategies for pathway modulation and even optimization. This investigation paves the way for the development of effective metabolic engineering strategies based on targeted manipulation of key enzymes to customize engineered strains for effective large-scale bio-based production.

Purification, Characterization and Antifungal Activity of the Aspergillus niveus Chitinase Produced Using Shrimp Shells

Chitinases are biotechnologically relevant enzymes that can be applied in such different sectors as pharmaceutical, food, environmental management, the biocontrol of pests and in the paper and cellulose industry. Microorganisms as filamentous fungi are the most important source of these biomolecules. The fungus Aspergillus niveus produces extracellular chitinase when cultured under submerged fermentation using shrimp shells, a residue generated by the fish industry, as a carbon source, for 96 h at 30 °C and 100 rpm. The particle size and concentration of the shrimp shells affected enzyme production. The chitinase was purified until electrophoretic homogeneity through the use of a Sephadex G-100 chromatographic column. It is a monomeric glycoprotein with a molecular mass of 47 kDa estimated using SDS-PAGE and 49.3 kDa determined using gel filtration. The carbohydrate content was 22.8%. The best temperature and pH for enzyme activity were 65 °C and 6.0, respectively. Approximately 80% of the enzymatic activity was preserved at pH 4.0 and 5.0 for 48 h, and the half-life (t50) was maintained for 48 h at 40 °C. Salts, EDTA and β-mercaptoethanol did not affect chitinase activity significantly, but organic solvents reduced it. The kinetic parameters determined using p-NPGlycNac were Km of 2.67 mmol L−1, Vmax of 12.58 U mg of protein−1, Kcat of 2.47 s−1 and K cat/Km of 0.93 s−1 mmol L−1. The A. niveus chitinase inhibited the growth of all fungal strains used, especially Trichoderma harzianum (MIC = 22.4 μg mL−1) and Penicillium purpurogenum (MIC = 11.2 μg mL−1). The chitinase produced by A. niveus presented interesting characteristics that indicate its potential of application in different areas.