Carbon Monoxide Research Articles

Highly bifunctional Rh2P on N,P-codoped carbon for hydrazine oxidation assisted energy-saving hydrogen production.

Highly pure Rh2P nanoparticles on N,P-codoped carbon were synthesized by a simple "mix-and-pyrolyze" method using one kind of low-cost nucleotide as the carbon, nitrogen and phosphorus source, which exhibits excellent bifunctional activity for the hydrogen reduction and hydrazine oxidation reactions, achieving energy-efficient hydrogen production.

Physiological basis for atmospheric methane oxidation and methanotrophic growth on air.

Atmospheric methane oxidizing bacteria (atmMOB) constitute the sole biological sink for atmospheric methane. Still, the physiological basis allowing atmMOB to grow on air is not well understood. Here we assess the ability and strategies of seven methanotrophic species to grow with air as sole energy, carbon, and nitrogen source. Four species, including three outside the canonical atmMOB group USCα, enduringly oxidized atmospheric methane, carbon monoxide, and hydrogen during 12 months of growth on air. These four species exhibited distinct substrate preferences implying the existence of multiple metabolic strategies to grow on air. The estimated energy yields of the atmMOB were substantially lower than previously assumed necessary for cellular maintenance in atmMOB and other aerobic microorganisms. Moreover, the atmMOB also covered their nitrogen requirements from air. During growth on air, the atmMOB decreased investments in biosynthesis while increasing investments in trace gas oxidation. Furthermore, we confirm that a high apparent specific affinity for methane is a key characteristic of atmMOB. Our work shows that atmMOB grow on the trace concentrations of methane, carbon monoxide, and hydrogen present in air and outlines the metabolic strategies that enable atmMOB to mitigate greenhouse gases.

Synthesis of Novel Polymers with Biodegradability by Main-Chain Editing of Chiral Polyketones.

Although the use of biodegradable plastics is suitable for unrecoverable, single-use plastic, their high production cost and much lower variety compared to commodity plastics limit their application. In this study, we developed a new polymer with potential biodegradability, poly(ketone/ester), synthesized from propylene and carbon monoxide. Propylene and carbon monoxide are easily available at low costs from fossil resources, and they can also be derived from biomass. Using an atom insertion reaction to the main chain of the polymer, the main-chain editing of the polymer molecule proceeded with up to 89% selectivity for atom insertion over main-chain cleavage.

Rate-Determining Step for Electrochemical Reduction of Carbon Dioxide into Carbon Monoxide at Silver Electrodes

Rate-Determining Step for Electrochemical Reduction of Carbon Dioxide into Carbon Monoxide at Silver Electrodes

Recent Developments On Activatable Turn-On Fluorogenic Donors of Hydrogen Sulfide (H2S).

Hydrogen sulfide (H2S) is considered the third member of the gasotransmitter family, along with nitric oxide (NO) and carbon monoxide (CO). Besides its role in physiological and pathophysiological conditions, the promising therapeutic potential of this small-molecule makes it advantageous for various pharmaceutical applications. The endogenous production of H2S at a lower concentration is crucial in maintaining redox balance and cellular homeostasis, and the dysregulation leads to various disease states. In the event of H2S deficiency, the exogenous donation of H2S could help maintain the optimal cellular concentration of H2S and cellular homeostasis. Over the last several years, researchers have developed numerous small-molecule non-fluorogenic organosulfur compounds as H2S donors and investigated their pharmacological potentials. However, reports on stimuli-responsive turn-on fluorogenic donors of H2S have appeared recently. Interestingly, the fluorogenic H2S donors offer additional advantages with the non-invasive real-time monitoring of the H2S release utilizing the simultaneous turn-on fluorogenic processes. The review summarizes the recent developments in turn-on fluorogenic donors of H2S and the potential biological applications that have developed over the years.

Stability of carboxy-hemoglobin during storage at different temperatures.

Accurate determination of carboxy-hemoglobin (COHb%) is essential for the assessment of hemoglobin mass (Hbmass) by CO-rebreathing. To analyze blood samples for a certain period of time after blood collection, it is necessary to know the stability of the COHb% during storage. The aim of the study was to determine the stability of COHb% at different storage temperatures over a period of up to 3months. Twenty-five milliliters of cubital venous blood was taken from five volunteers (three females and two males) before and after inhalation of 0.8/1.0mL/kg carbon monoxide and stored at +20°C and +4°C for 6days and at -70°C for 12 weeks. Within the first 6days, the blood was analyzed daily, then weekly for 12 weeks. Additionally, Hbmass was determined in 13 endurance athletes immediately after blood collection and after storage for 3days (eight cyclists) and 7days (five swimmers) at +20°C or +4°C. COHb% before and after CO inhalation was 1.56 ± 0.48 and 5.86 ± 1.12%, respectively, and remained unchanged over 6days, with no difference between storage at different temperatures. The standard deviation (STD) over time was between 0.07% and 0.12%. Similarly, storage at -70°C for 12 weeks did not change COHb%, whereas STD was 0.07%. Hbmass determined immediately and, after 3 or 7days of storage, differed by 10 ± 7 g and 15 ± 11 g corresponding to a typical error of 0.8% and 1.1%. Blood storage at +20°C and +4°C for 6days and at -70°C for 12 weeks does not affect COHb% and has, therefore, no influence on Hbmass assessment.

Carbon monoxide as a cellular protective agent in a swine model of cardiac arrest protocol.

Out-of-hospital cardiac arrest (OHCA) affects over 360,000 adults in the United States each year with a 50-80% mortality prior to reaching medical care. Despite aggressive supportive care and targeted temperature management (TTM), half of adults do not live to hospital discharge and nearly one-third of survivors have significant neurologic injury. The current treatment approach following cardiac arrest resuscitation consists primarily of supportive care and possible TTM. While these current treatments are commonly used, mortality remains high, and survivors often develop lasting neurologic and cardiac sequela well after resuscitation. Hence, there is a critical need for further therapeutic development of adjunctive therapies. While select therapeutics have been experimentally investigated, one promising agent that has shown benefit is CO. While CO has traditionally been thought of as a cellular poison, there is both experimental and clinical evidence that demonstrate benefit and safety in ischemia with lower doses related to improved cardiac/neurologic outcomes. While CO is well known for its poisonous effects, CO is a generated physiologically in cells through the breakdown of heme oxygenase (HO) enzymes and has potent antioxidant and anti-inflammatory activities. While CO has been studied in myocardial infarction itself, the role of CO in cardiac arrest and post-arrest care as a therapeutic is less defined. Currently, the standard of care for post-arrest patients consists primarily of supportive care and TTM. Despite current standard of care, the neurological prognosis following cardiac arrest and return of spontaneous circulation (ROSC) remains poor with patients often left with severe disability due to brain injury primarily affecting the cortex and hippocampus. Thus, investigations of novel therapies to mitigate post-arrest injury are clearly warranted. The primary objective of this proposed study is to combine our expertise in swine models of CO and cardiac arrest for future investigations on the cellular protective effects of low dose CO. We will combine our innovative multi-modal diagnostic platform to assess cerebral metabolism and changes in mitochondrial function in swine that undergo cardiac arrest with therapeutic application of CO.

Molecular cloud matching in CO and dust in M33. I. High-resolution hydrogen column density maps from Herschel

This study is aimed to contribute to a more comprehensive understanding of the molecular hydrogen distribution in the galaxy M33 by introducing novel methods for generating high angular resolution ($18.2''$, equivalent to $75\ pc $ for a distance of $847\ kpc $) column density maps of molecular hydrogen ($N_ H_2 $). M33 is a local group galaxy that has been observed with Herschel in the far-infrared (FIR) wavelength range from $70$ to $500\ Previous studies have presented total hydrogen column density maps ($N_ H $), using these FIR data (partly combined with mid-IR maps), employing various methods. We first performed a spectral energy distribution (SED) fit to the $160$, $250$, $350,$ and $500\ continuum data obtain $N_ H $, using a technique similar to one previously reported in the literature. We also use a second method which involves translating only the $250\ map into a $N_ H $ map at the same angular resolution of $18.2''$. An $N_ H_2 $ map via each method is then obtained by subtracting the component. Distinguishing our study from previous ones, we adopt a more versatile approach by considering a variable emissivity index, $ and dust absorption coefficient, $ This choice enables us to construct a $ map, thereby enhancing the depth and accuracy of our investigation of the hydrogen column density. We address the inherent biases and challenges within both methods (which give similar results) and compare them with existing maps available in the literature. Moreover, we calculate a map of the carbon monoxide $ CO(1-0) $-to-molecular hydrogen (htwo ) conversion factor ( factor), which shows a strong dispersion around an average value of $1.8 throughout the disk. We obtain column density probability distribution functions ($N$-PDFs) from the $N_ H $, $N_ H_2 $, and $N_ hi $ maps and discuss their shape, consisting of several log-normal and power-law tail components.

Molecular composition of clouds: a comparison between samples collected at tropical (Réunion Island, France) and mid-north (Puy de Dôme, France) latitudes

Abstract. The composition of dissolved organic matter of cloud water has been investigated through non-targeted high-resolution mass spectrometry on only a few samples that were mostly collected in the Northern Hemisphere in the USA, Europe and China. There remains, therefore, a lack of measurements for clouds located in the Southern Hemisphere, under tropical conditions and influenced by forest emissions. As a matter of fact, the comparison of the composition of clouds collected in different locations is challenging since the methodology for the analysis and data treatment is not standardized. In this work, the chemical composition of three samples collected at Réunion Island (REU) during the BIO-MAÏDO field campaign, in the Indian Ocean, with influences from marine, anthropogenic and biogenic (tropical) emissions, is investigated and compared to the chemical composition of samples collected at the Puy de Dôme (PUY) observatory in France. The same methodology of analysis and data treatment was employed, producing a unique dataset for the investigation of the molecular composition of organic matter in cloud water. Besides the analysis of elemental composition, we investigated the carbon oxidation state (OSC) of dissolved organic matter, finding that overall samples collected at PUY are more oxidized than those collected at REU. Molecular formulas were also classified based on stoichiometric elemental ratios, showing the high frequency and abundance of reduced organic compounds, classified as lipids (LipidC), in this matrix, which led to a search for terpene oxidation products in cloud water samples. To better discriminate between samples collected at PUY and REU, statistical analysis (principal component analysis and agglomerative hierarchical clustering) was performed on the ensemble of molecular formulas and their intensities. Samples collected at REU have a different composition from samples collected at PUY, which is mainly linked to different primary sources, the processing of organic matter in cloud water and the influence of different primary emissions at the two locations.

Measurement of the vertical distributions of atmospheric pollutants using an uncrewed aerial vehicle platform in Xi'an, China.

Vertical observations of atmospheric pollutants play crucial roles in a comprehensive understanding of the distribution characteristics and transport of atmospheric pollutants. A hexacopter uncrewed aerial vehicle equipped with miniature monitors was employed to measure the vertical distribution of atmospheric pollutants within a height of 1000 m at a rural site in Xi'an, China, in 2021. The concentrations of carbon monoxide (CO) and particulate matter (PM) showed generally decreasing trends with increasing height. The ozone (O3) concentration showed a general increasing trend with height followed by a gradual decreasing trend. Vertical decrements of PM2.5 and CO from 0 to 1000 m were significantly (p < 0.05) lower on observation days during summer (14.0 ± 8.1 μg m-3 and 8.7 ± 6.6 ppb, respectively), compared with those in winter (78.3 ± 14.1 μg m-3 and 34.8 ± 17.3 ppb, respectively). The horizontal transport of PM and CO mostly occurred in the morning and at night during winter observations at an altitude of 400-500 m. During the winter haze, the PM and CO profile concentrations below 500 m increased substantially with the decrease in the height of the thermal inversion layer. Vertical O3 transportation was observed in the afternoon and evening during summer, and a ∼37.7% (11.6 ppb) increase in ground-level O3 was observed in relation to vertical transport from the upper atmosphere. The results provide insights into the vertical distribution and transport of atmospheric pollutants in rural areas near cities.

Stratospheric influence on surface ozone pollution in China

Events of stratospheric intrusions to the surface (SITS) can lead to severe ozone (O3) pollution. Still, to what extent SITS events impact surface O3 on a national scale over years remains a long-lasting question, mainly due to difficulty of resolving three key SITS metrics: frequency, duration and intensity. Here, we identify 27,616 SITS events over China during 2015-2022 based on spatiotemporally dense surface measurements of O3 and carbon monoxide, two effective indicators of SITS. An overview of the three metrics is presented, illustrating large influences of SITS on surface O3 in China. We find that SITS events occur preferentially in high-elevation regions, while those in plain regions are more intense. SITS enhances surface O3 by 20 ppbv on average, contributing to 30-45% of O3 during SITS periods. Nationally, SITS-induced O3 peaks in spring and autumn, while over 70% of SITS events during the warm months exacerbate O3 pollution. Over 2015-2022, SITS-induced O3 shows a declining trend. Our observation-based results can have implications for O3 mitigation policies in short and long terms.

Assessing Tunisia's urban air quality using combined lichens and Sentinel-5 satellite integration.

In Tunisia, urban air pollution is becoming a bigger problem. This study used a combined strategy of biomonitoring with lichens and satellite mapping with Sentinel-5 satellite data processed in Google Earth Engine (GEE) to assess the air quality over metropolitan Tunis. Lichen diversity was surveyed across the green spaces of the Faculty of Science of Tunisia sites, revealing 15 species with a predominance of pollution-tolerant genera. The Index of Atmospheric Purity (IAP) calculated from the lichen data indicated poor air quality. Spatial patterns of pollutants sulfur dioxide (SO2), ozone (O3), nitrogen dioxide (NO2), carbon monoxide (CO), and aerosol index across Greater Tunis were analyzed from Sentinel-5 datasets on the GEE platform. The higher values of these indices in the research area indicate that it may be impacted by industrial activity and highlight the considerable role that vehicle traffic plays in air pollution. The results of the IAP, IBL, and the combined ground-based biomonitoring and satellite mapping techniques confirm poor air quality and an environment affected by atmospheric pollutants which will enable proactive air quality management strategies to be put in place in Tunisia's rapidly expanding cities.

Variability in the properties of the distribution of the relative humidity with respect to ice: implications for contrail formation

Abstract. Relative humidity with respect to ice (RHi) is a key variable in the formation of cirrus clouds and contrails. We document its probability density function (PDF) using long-term Measurements of Ozone, Water Vapour, Carbon Monoxide and Nitrogen Oxides by In-Service Airbus Aircraft (MOZAIC) and the In-service Aircraft for a Global Observing System (IAGOS) observations over the period 1995–2022 in the upper troposphere (UT) and the lower stratosphere (LS) between 325 and 175 hPa. The characteristics of the RHi PDF differ in the UT and in the LS of the high-latitude regions (HLs) and mid-latitude regions (MLs) of the Northern Hemisphere. In the LS, this PDF decreases exponentially with increasing RHi. In the UT, it first increases exponentially in subsaturated conditions and then decreases exponentially in supersaturated conditions. Because of these different behaviors, the PDF for the combined UT and LS is bimodal. In contrast to the HLs and the MLs, the RHi PDF in the tropical troposphere decreases exponentially with increasing RHi. The different forms of PDF, in the tropics and in the higher-latitude regions, lead to a global PDF of RHi in subsaturated tropospheric conditions that is almost uniform. These findings invite caution when using MOZAIC and IAGOS measurements to calibrate large-scale simulations of RHi. The variability in RHi properties associated with that of temperature also has implications for the formation of contrails. We examined the impact of switching fuel (from kerosene to bioethanol or liquid hydrogen) on the frequency of contrail formation using the Schmidt–Appleman criterion. We show that bioethanol and, to a larger extent, liquid hydrogen would produce more contrails. The impact of a potential change from kerosene to these alternative fuels decreases with decreasing pressure but increases when moving from the higher latitudes of the Northern Hemisphere to the tropics. Finally, we emphasize that investigations of the impact on contrail occurrence frequency as a result of switching from fossil kerosene to more sustainable fuels must be carried out in various meteorological conditions.

Fluorescent small molecule donors.

Small molecule donors (SMDs) play subtle roles in the signaling mechanism and disease treatments. While many excellent SMDs have been developed, dosage control, targeted delivery, spatiotemporal feedback, as well as the efficiency evaluation of small molecules are still key challenges. Accordingly, fluorescent small molecule donors (FSMDs) have emerged to meet these challenges. FSMDs enable controllable release and non-invasive real-time monitoring, providing significant advantages for drug development and clinical diagnosis. Integration of FSMDs with chemotherapeutic, photodynamic or photothermal properties can take full advantage of each mode to enhance therapeutic efficacy. Given the remarkable properties and the thriving development of FSMDs, we believe a review is needed to summarize the design, triggering strategies and tracking mechanisms of FSMDs. With this review, we compiled FSMDs for most small molecules (nitric oxide, carbon monoxide, hydrogen sulfide, sulfur dioxide, reactive oxygen species and formaldehyde), and discuss recent progress concerning their molecular design, structural classification, mechanisms of generation, triggered release, structure-activity relationships, and the fluorescence response mechanism. Firstly, from the large number of fluorescent small molecular donors available, we have organized the common structures for producing different types of small molecules, providing a general strategy for the development of FSMDs. Secondly, we have classified FSMDs in terms of the respective donor types and fluorophore structures. Thirdly, we discuss the mechanisms and factors associated with the controlled release of small molecules and the regulation of the fluorescence responses, from which universal guidelines for optical properties and structure rearrangement were established, mainly involving light-controlled, enzyme-activated, reactive oxygen species-triggered, biothiol-triggered, single-electron reduction, click chemistry, and other triggering mechanisms. Fourthly, representative applications of FSMDs for trackable release, and evaluation monitoring, as well as for visible in vivo treatment are outlined, to illustrate the potential of FSMDs in drug screening and precision medicine. Finally, we discuss the opportunities and remaining challenges for the development of FSMDs for practical and clinical applications, which we anticipate will stimulate the attention of researchers in the diverse fields of chemistry, pharmacology, chemical biology and clinical chemistry. With this review, we hope to impart new understanding thereby enabling the rapid development of the next generation of FSMDs.

Evaluating the Performance and Practicality of a Multi-Parameter Assessment System with Design, Comparative Analysis, and Future Directions

This study introduces a developed environmental quality assessment system, detailing its hardware, software, and comparative analysis against a publicly available system. While showing larger deviations in particulate matter and air humidity parameters, the proposed system demonstrates sufficient accuracy in other environmental characteristics. It establishes a standardized operating procedure and evaluates uncertainty and quality assurance measures, ensuring reliability in environmental measurements. The system offers comprehensive capabilities, measuring parameters like total volatile organic compounds, carbon dioxide, temperature, humidity, particulate matter, noise, nitrogen oxides, sulfur oxides, ozone, and carbon monoxide, with real-time monitoring functions for detecting environmental changes. Its user-friendly interfaces, scalability, and potential integration with existing systems enhance its versatility and cost-effectiveness across diverse settings. This study underscores the need for future research to enhance accuracy, reliability, and real-time operability and explore integration with smart city initiatives and environmental management systems. Overall, the proposed system represents a promising advancement in environmental monitoring technology, facilitating comprehensive environmental quality assessment and management.

Characteristics of Carbon Monoxide and Ethylene Generation in Mine’s Closed Fire Zone and Their Influence on Methane Explosion Limits

Methane explosions often occur during the closure process of mine fire zones, during which the concentration of combustible gases such as monoxide and ethylene produced by coal combustion dynamically changes, which changes the risk of methane explosion. Therefore, studying the gas concentration distribution and methane explosion limits during the process of mine closure is of great significance for disaster prevention and control. In this paper, a three-dimensional physical model of gob was built, and the distribution of monoxide and ethylene in the process of fire zone closure was investigated. Further, the explosion limits of methane enriched with CO and C2H4 in the closed fire zone of gob were analyzed. The results indicate that CO and C2H4 would form a small-scale accumulation phenomenon near the fire zone after the closure of the fire zone, and when the fire zone is closed for more than 15 min, the mixed combustible gases in the environment lose their explosiveness.

Instantaneous Thermal Energy for Swift Synthesis of Single-Atom Catalysts for Unparalleled Performance in Metal-Air Batteries and Fuel Cells.

Based on experimental and computational evidence, phthalocyanine (Pc) compounds in the form of quaternary bound metal-nitrogen (N) atoms are the most effective catalysts for oxygen reduction reaction (ORR). However, the heat treatment process used in their synthesis may compromise the ideal structure, causing the agglomeration of transition metals. To overcome this issue, we developed a novel method for synthesizing iron (Fe) single-atom catalysts with ideal structures supported by thermally exfoliated graphene oxide (GO). This was achieved through a short heat-treatment of only 2.5min involving FePc and N,N-dimethylformamide in the presence of GO. According to the synthesis mechanism revealed by this study, carbon monoxide acts as a strong linker between the single Fe atoms and graphene. It facilitates the formation of a structure containing oxygen species between FeN4 and graphene, which provides high activity and stability for the ORR. These catalysts possess an enormous number of active sites and exhibit enhanced activity towards the alkaline ORR. They have demonstrated excellent performance when applied to real electrochemical devices, such as zinc-air batteries and anion exchange membrane fuel cells. We expect that the instantaneous heat treatment method developed in our study will aid in the development of high-performing single-atom catalysts. This article is protected by copyright. All rights reserved.

Relationship Between Air Pollutants and the Incidence of Epistaxis in Yangzhou.

Objectives: This project aims to explore the relationship between the air quality index (AQI), the concentration of 6 air pollutants, and the incidence of epistaxis in Yangzhou. Also, to provide reference information for the prevention and treatment of epistaxis. Methods: Data of patients with epistaxis admitted to the Northern Jiangsu People's Hospital Affiliated to Yangzhou University from January 2017 to December 2021 were collected. In addition, the local AQI and the concentrations of 6 air pollutants, namely particulate matter (PM2.5, PM10), sulfur dioxide (SO2), nitrogen dioxide (NO2), carbon monoxide (CO), and ozone (O3), were analyzed at the time of onset. Furthermore, the correlation with the incidence of epistaxis has been analyzed. Results: From 2017 to 2021, there were 24,721 patients with epistaxis aged from 0 to 17 years old while male patients were more than females. The incidence was higher in April, May, and June. There was a statistically significant difference in the number of daily epistaxis in different months and under AQI conditions (P < .05). Spearman's correlation analysis showed that there was a positive correlation between the number of daily epistaxis and the concentrations of AQI, CO, NO2, O3, PM2.5, PM10, and SO2 in Yangzhou, in which O3, PM10, and SO2 were highly correlated with the average number of daily epistaxis, and there was no obvious time lag effect of air pollutants on epistaxis. Conclusion: Epistaxis in the Yangzhou area is more common in males, mostly occurs in 0 to 17 years old, with seasonal. There was also a positive correlation between the incidence of epistaxis and air pollutants in Yangzhou. Therefore, by reducing the AQI index in daily life, and reducing the concentration of environmental pollutants in the air, the occurrence of epistaxis could be prevented and reduced to a certain extent.

Plasma Processing of Rubber Powder from End-of-Life Tires: Numerical Analysis and Experiment

Tire recycling is becoming an increasingly important problem due to the growing number of end-of-life tires (ELTs). World-wide, ELTs account for more than 80 million tons. ELTs contribute to environmental pollution in the long term. They are flammable, toxic and non-biodegradable. At the same time, ELTs contain rubber, metal and textile cord, which are valuable raw materials. ELTs are buried in landfills, burned, crushed and restored. Most of these methods have a negative impact on the environment. From an environmental point of view, the most preferred ways to recycle tires are retreading and shredding. Rubber powder (RP) or crumb is mainly used for rubber pavers production, waterproofing, curbs, road slabs and various surfaces. An alternative method for RP processing, eliminating the disadvantages of the above approaches, is plasma gasification and pyrolysis. The paper presents a thermodynamic and kinetic analysis and an experiment on plasma processing of RP from worn tires to produce flammable gas. At a mass-average temperature of 1750 K, the yield of synthesis gas from plasma-air gasification of RP was 44.6% (hydrogen—19.1, carbon monoxide—25.5), and 95.6% of carbon was gasified. The experimental and calculated results satisfactorily agreed. It was found that plasma products from RP did not contain harmful impurities, either in calculations or experiments. Plasma gasification allows for recycling ELTs in an environmentally friendly way while also generating flammable gases that are valuable commodities. In this research, plasma technology was demonstrated to be effective for gasifying RP to produce flammable gas.

Curcumin as a Potential Therapeutic Agent for Mitigating Carbon Monoxide Poisoning: Evidence from an Experimental Rat Study

Curcumin as a Potential Therapeutic Agent for Mitigating Carbon Monoxide Poisoning: Evidence from an Experimental Rat Study