Carbon Footprint Research Articles

Who is sufficient, and why? A mixed-methods approach to the social determinants of sufficiency lifestyles in the pursuit of decarbonisation

Sufficiency consists of less materially intensive consumption patterns that focus on wellbeing rather than material wealth. Such consumption patterns are commonly referred to as sufficiency lifestyles and are increasingly seen as a key driver for achieving decarbonisation. However, while research finds that sustainable consumption and environmental behaviour are often associated with high social status, lower carbon footprints and lower consumption more broadly are associated in the literature with poverty and deprivation. This article aims to investigate whether a combination of low carbon footprint and high wellbeing exists, what socio-demographic characteristics are associated with it, and to explore the actual experiences of people engaged in sufficiency lifestyles through initiatives and their characteristics. We use a mixed-methods design with data from demographically representative surveys in Denmark, Germany, Italy and Latvia (N=5,080), and in-depth interviews with participants from sufficiency-oriented intentional communities (N=90). We find that sufficiency lifestyles are linked to a stronger inclination towards sufficiency orientation or a heightened stronger environmental identity, accompanied by a negative correlation with social deprivation aspects. Drawing on the interviews, we find that individuals engaged in sufficiency-oriented practices tend to benefit from economic, social and cultural resources that allow them to overcome energy dependency and constraints, and that their motivations are not limited to pro-environmental behaviour. Based on these empirical findings, we explore potential avenues for the diffusion of sufficiency-oriented lifestyles, including the establishment of binding rules through a democratic process that curb overconsumption while providing attractive low-carbon lifestyles for all.

Multidisciplinary Optimization of Gyroid Topologies for a Cold Plate Heat Exchanger Design

Abstract The strive to reduce the environmental impact of aviation has led to electrification and increasing demand for powerful on-board power electronic systems. These high-performance electrical components are bound to produce significant amounts of low-quality heat waste that, if not dissipated properly, will lead to malfunctioning and even permanent damage. For this reason, high-performance heat exchangers (HX) represent a key enabler for future advances in aircraft systems electrification and are vital to meet net zero goals and reduce the aviation's carbon footprint. For a given volume of the exchanger, the heat flow rate can be increased by adopting more sophisticated fluid domains. However, excessive geometrical complexity will lead to an increase in pressure losses, often resulting in inhomogeneous temperature distributions. In this paper, a novel optimization procedure is employed to maximize the efficiency of a high-performance heat exchanger, while minimizing overall pressure loss and temperature gradients. The optimization is performed with full three-dimensional high-fidelity computational flow simulations. The geometry of the fluid domain is constituted by triply periodic minimal surfaces (TPMS), with a parametrization based on thickness and aspect ratios, done by using the ntopology suite. To assess the performance gain, the topology-optimized design is compared against the datum case and a conventional serpentine design.

A Study on the Potential for the Application of Peanut Shells as a Reducer in the Process of Metal Recovery from Metallurgical Slags

Copper production technology is a complex process consisting of many stages. The combination of pyrometallurgical and hydrometallurgical stages, on the one hand, complicates production while, on the other hand, allowing for a relatively selective separation of intermediate or waste materials that can be subjected to the process of recovery of useful components. Materials of this type are characterised by a much higher copper content relative to the ore material. On the other hand, due to the oxide form, reduction processes are used in which coke is mainly applied. Reduction of the unfavourable phenomenon of CO2 emissions, in this case, can be performed through the use of bioreducers, which are characterised by an inert carbon footprint since the generation of carbon dioxides is the same as its absorption at the stage of vegetation and growth. In this paper, the topic of determining the feasibility of using selected bioreducers, such as peanut shells, to verify their suitability in the process of reducing copper oxides as well as the impact on the working components of the laboratory reactor in which the process is carried out are discussed. In this case, raw materials with a composition similar to the that of slags produced at the copper production stage in a flash furnace were tested for reduction. The results referring to reducing lead and copper contents above 88% Pb and 98% Cu indicate the great potential of this type of bioreducer. An additional advantage is the relatively wide availability of peanut resources. The effects of the copper reduction time on the degree of decopperisation performed with a constant reducer addition at 1300 °C were studied in this paper. Following 1 h of the process, the copper content in the slag was 0.78 wt%, while the longer process duration resulted in a copper fraction of 0.19 wt%. Considering lead, its content was 0.33 wt% after the reduction process.

Uncovering the Evidence for Sustainability in Urology: A Scoping Review.

This article focuses on the environmental impact of urology devices and procedures in hospitals and identifies practices that can reduce greenhouse gas emissions associated with urology services. A scoping review following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines was conducted using MEDLINE, EMBASE, and Google Scholar to find studies on the carbon footprint of urologic procedures and sustainable practices. We identified 14 studies, 6 of which used life cycle assessments to compare the environmental impact of single-use and reusable urology devices. Three studies favored single-use devices, 2 favored reusable ones, and 1 found no significant difference, with the sterilization of reusable devices being a major carbon contributor. To enhance sustainability in urology, 8 articles suggested measures including day-case procedures, minimizing low-value care, drapeless cystoscopy, fluid management systems, using quick response (QR) codes in documentation, telehealth initiatives, and low-emission anesthetics. Promoting sustainability in healthcare requires more than just using reusable equipment; it necessitates a comprehensive approach from manufacturing to disposal, including the carbon footprint of sterilization. Encouraging low-emission anesthetics, QR codes, and telemedicine can significantly reduce emissions in urology.

Experimental Study of the Mechanical Properties of Mortar with Biobío Region Clam Shells Used as a Partial Replacement for Cement

The use of seashells as a partial substitute for cement in construction not only offers an innovative solution for marine waste management but also contributes to reducing the carbon footprint of the cement industry, decreasing the CO2 emissions associated with cement production and promoting more sustainable construction practices. This study addresses the mechanical behavior of mortar specimens with partial cement replacement using crushed Biobío region clam shells, both calcined and uncalcined, at substitution rates of 5% and 10%. This approach allows the analysis of their effect on the mechanical strength and properties of the mortar, which has not been widely investigated in the Chilean context or with this particular species of shell. For the mechanical characterization of the specimens, tensile flexural tests and compressive tests were were conducted at ages of 3, 7, 14, and 28 days. The compressive strengths of the samples that incorporated calcined residue with partial cement replacements of 5% and 10% were 83.69% and 78.27%, respectively, of the average strength of 20.97 MPa reached by the standard sample. In terms of their tensile flexural strength, these samples reached average strengths of 104.31% and 104.04% of the strength of 12.12 MPa obtained by the standard sample. In the case of the uncalcined samples, the 5% and 10% replacements reached 103.55% and 102.64% of the tensile strength of 15.54 MPa obtained by the standard sample, while they reached 92.32% and 80.07% of the compressive strength of 27.81 MPa achieved by the standard sample. From these results, it is determined that the calcined shells did not improve the mechanical resistance of the mortar, suggesting that the calcination process must be studied in depth.

Improving efficiency and sustainability via supply chain optimization through CNNs and BiLSTM

Supply chain management is changing rapidly due to increasing complexity, uncertain demand, and the requirement for sustainable methods. Advanced technologies like Bidirectional Long Short-Term Memory networks (BiLSTM) and Convolutional Neural Networks (CNNs) can enhance supply chain processes. This paper proposes integrating CNNs and BiLSTM models to improve supply chain efficiency and sustainability. The proposed model employs CNNs to optimize resource allocation, uncover trends, and evaluate supply chain spatial linkages. Using BiLSTM models to capture temporal correlations allows accurate demand forecasting and proactive decision-making. Combining these models explains supply chain dynamics. CNNs and BiLSTM models' adaptive learning and real-time monitoring boost efficiency by responding quickly to changing situations. Predictive analytics optimizes inventory, lowers stock outs, and cuts lead times. Sustainability factors include transportation route optimization, carbon footprint minimization, and intelligent green-sourcing decision assistance. The proposed Hybrid Model achieved 94.65 % Specificity, 96.57 % Accuracy, 95.67 % Sensitivity and 0.85 % MCC. The result analysis demonstrates that the proposed model significantly improved the accuracy level. This research sheds light on supply chain difficulties from all sides. CNNs and BiLSTM models can boost operational efficiency and link supply chain practices with sustainability goals to produce a more sustainable global supply network.

Trace Ru Incorporation Boosted Co2P Nanorods for Superior Water Electrolysis and Substrate-Paired Electrolysis Toward Value-Added Chemicals in Alkaline Medium.

Electro-valorization of biomass-derived chemicals has ensured sustainable production of value-added products, an effective approach for reducing carbon footprint, through renewable energy. Electrochemical oxidation and reduction reactions in aqueous media using H2O as a potential source for active hydrogenated and oxygenated species fulfill the purpose. In this study, Ru─Co2P nanorods are explored as a bifunctional electrocatalyst toward valorization of Organics at basic media. The in-situ electrogenerated Co3+ and Co4+ species act as active oxidants toward product selectivity. An overpotential of 68mV is found for hydrogen evolution reaction (1m NaOH) with Ru─Co2P. Further, used as cathode, Ru─Co2P effectively reduces furfuraldehyde to furfuryl alcohol and p-nitrophenol to p-aminophenol. Ru doping enables ease of formation of active species both for reduction and oxidation, faster charge transfer between catalyst to absorbates. Density Functional Theory calculation establishes Ru incorporation in Co2P surface results in enhanced adsorption of substrates. Ru doping modulates the electronic structure of Co2P which changes the density of states resulting in faster water dissociation and water splitting. To reach 10mAcm-2 current density only 1.6V is required for water electrolysis, whereas 1.4V is enough for substrate-paired electrolysis with simultaneous oxidation of benzyl alcohol and reduction of p-nitro phenol.

Carbon footprints of centralized and decentralized food waste utilization pathways

Food waste is usually utilized in centralized treatment facilities and is sometimes treated in decentralized facilities; however, the latter has not been evaluated systematically regarding carbon emissions. This study surveyed fifty-nine centralized and decentralized food waste treatment projects in Shenzhen, and incineration, anaerobic digestion, composting, and emerging technologies such as insect bioconversion and organic acid production were applied. Their carbon footprints were analyzed based on real data covering collection and transport, energy and material consumption, secondary pollutant control, and impurity disposal. The results showed that centralized facilities had a lower overall carbon footprint, although carbon emissions from their collection and transportation were higher. Anaerobic digestion performed best with an average carbon emission of −136.63 kg CO2-eq/t, followed by black soldier fly larvae cultivation (−12.86 kg CO2-eq/t), incineration (−11.02 kg CO2-eq/t), and organic acid production (−6.86 kg CO2-eq/t). All decentralized facilities were operated with net carbon emissions because they consumed a large amount of electricity or thermal heat without the full use of organic matter in the food waste. An optimal route was recommended by combining centralized anaerobic digestion and decentralized squeezing dewatering with adequate oil recovery, and this can make the overall carbon emission decrease from −6.72 kg CO2-eq/t to −17.75 kg CO2-eq/t. These results can provide decision-makers with guidance on food waste management to support net zero and sustainable development goal 12 and 13.

Eco-innovation minimizes the carbon footprint of wine production

Wine industry faces significant sustainability challenges in the wake of climate change. Life cycle assessments for carbon footprint in wineries suggest that the conventional farming exhibits higher values of 0.06–3.0 kg CO2-eq bottle–1 of 750 mL wine as compared to mixed and organic farming. Life cycle assessment findings highlight that most studies often overlooked the resources in farming practices, biogenic emissions, and wastewaters in the overall reduction of winery carbon footprint. We demonstrate that the adoption of eco-innovations such as constructed wetlands and Phycosol utilize the overlooked resource loop and significantly reduce the winery carbon footprint. Empirical data analysis suggests that the use of these eco-innovative models results in 25‒30% reduction of CO2 emissions bottle–1 of 750 mL wine besides embracing Sustainable Development Goal 9, and effectively synergizing with Sustainable Development Goals 6 and 12, thus emphasizing their critical role in ensuring the sustainability of wine production.

The potential of virtual reality meetings in international research projects for greenhouse gas emission mitigation

PurposeEuropean Union (EU) research projects generally involve international teams based in different countries. This means that researchers need to travel internationally to participate for in-person meetings, which are crucial for facilitating collaboration among research teams and provide a platform for teams to share their progress. Unfortunately, much of the international traveling in EU projects is done by air and therefore it has a significant carbon footprint. One potential solution that has gained attention in recent years is virtual reality (VR) and the metaverse. The aim of this work is to investigate to what degree VR meetings provide a viable alternative to physical meetings in the context of EU research projects and can thus contribute to climate change mitigation.Design/methodology/approachA three-stepped approach was chosen. First, the requirements for VR meetings were determined by collecting all relevant aspects of physical meetings through a questionnaire. Second, a set of VR meeting experiments were designed and executed. Third, carbon footprints for both physical traveling and VR meetings (lifecycle) were calculated.FindingsWe conclude that VR can be a powerful tool which can supplement international projects and mitigate carbon emissions associated with traveling for in-person meetings by an estimated 7–19 times.Originality/valueThis paper explores the suitability of the current generation of VR technology and quantitatively evaluates its effectiveness for greenhouse gas emissions mitigation in the context of a European research project.

Advancing quinoxaline chemistry: Sustainable and green synthesis using L-arabinose as a catalyst

In the present study, an innovative and eco-friendly methodology for synthesizing quinoxaline derivatives has been introduced, leveraging L-arabinose as a novel catalyst. This approach not only underscores the feasibility of green chemistry in synthesizing high-purity quinoxaline derivatives but also highlights the enhanced sustainability of the process. Detailed mechanistic investigations revealed the synergistic interactions between L-arabinose and the reactants, providing a deeper understanding of the catalytic process. The synthesized compounds, due to their unique structural and electronic properties, may find promising applications in life and material sciences such as optoelectronics. Furthermore, our environmental impact assessment demonstrated significant reduction in generated waste, solvent use, and overall carbon footprint, aligning with the global agenda for sustainable development. This research marks a significant step forward in quinoxaline chemistry, promoting the adoption of green synthesis pathways while reinforcing the principles of sustainable and environment-friendly chemical practices.

Developing a Community-Based Carbon Footprint Questionnaire: Towards a Dynamic Understanding of How Personal Behaviour Interacts with Policy and Economic Change

Developing a Community-Based Carbon Footprint Questionnaire: Towards a Dynamic Understanding of How Personal Behaviour Interacts with Policy and Economic Change

Eco-Sustainability in Hospital Pharmacy: A Pilot Survey on 'Going Green'.

Purpose: Between 2009 and 2015, the Canadian health care system was estimated to be responsible for 4.6% of national carbon emissions. Determine awareness of and describe eco-initiatives that the department of pharmacy can implement to aim to reduce the carbon footprint in hospital pharmacy in an effort to 'go green'. Methods: In a quality improvement initiative, pharmacy employees (i.e. pharmacists and pharmacy technicians) completed a cross-sectional survey designed to gauge willingness to 'go green' at work, to identify actionable areas of waste, and to assess commuting practices. Results: A total of 15 respondents completed the survey conducted March 14th -April 7th, 2022. Most respondents (73%) were willing to engage in more sustainable practices at work. The main barriers to implementing green practices at work were 'too time consuming' (20%), 'adds too much complexity' (20%), and 'cost' (16%). For commuting, 60% indicated the primary mode of transportation as 'personal vehicle', where 'subsidized transit' and was listed as the greatest incentive that could encourage a greener commute. The three largest areas of waste cited were 'single use plastic' (36%), 'limited of awareness of green practices' (15%), and 'lights left on in empty rooms' (12%). Conclusions: Pharmacy staff shared willingness to engage in more sustainable 'go green' practices but raised challenges to do so. With the knowledge that Canada has the second most climate intensive health system, there is a need for future research to describe how hospital pharmacies can contribute strategically to 'go green', advancing with implementing low carbon sustainable pharmacy practices.

Enhancing food sustainability in the acute hospital setting - a nurse-led study of patient food.

Intensive global food production causes soil, water and air pollution, which has a negative impact on our health and future ability to produce sufficient nutritious food. Plant-based diets have the potential to reduce the environmental damage associated with the global food chain. The project sought to understand drivers of food waste and to improve food sustainability in a busy, tertiary referral hospital in England. Ward-level food waste was quantified. Qualitative data were collected using informal interviews with staff and additional data utilised the patient feedback survey. Ward-level food packaging waste and patient food choices were quantified using data on patient menu choices. The carbon footprint of patient food choices was calculated. Beef was the most popular menu choice, and was the main contributing factor to the high environmental impact of the hospital food chain. Increasing the visibility of vegetarian options on the menu led to a four-fold rise in these meals being chosen, which reduced the carbon footprint of the patient meal service. Recycling food packaging was also started, but there are challenges to widespread implementation. The project was successful, but it remains a starting point from which to increase food sustainability across the NHS and care sector catering provision.

A sustainable and expedited ‘One‐Stop’ prostate cancer diagnostic pathway to reduce environmental impact and enhance accessibility

AbstractObjectiveTo assess the carbon footprint, accessibility, and diagnostic performance of an expedited ‘One‐Stop’ prostate cancer (PCa) diagnostic pathway.Materials and methodsA total of 1083 consecutive patients undergoing magnetic resonance imaging (MRI) followed by transrectal ultrasound fusion‐guided prostate biopsy (PBx) were identified from a prospective database. The patients were divided according to the diagnostic pathway: One‐Stop, with MRI and same‐day PBx (3 hours apart), or Standard, with MRI followed by a second visit for PBx. Socioeconomic status was evaluated by the Distressed Communities Index (DCI) and the carbon footprint by the United States (U.S.) Environmental Protection Agency Greenhouse Gases Equivalencies Calculator.ResultsOverall, 260 patients underwent the One‐Stop and 823 the Standard pathway. The One‐Stop patients lived farther from the hospital (163 vs. 23 km; p < 0.001), had lower socioeconomic status with DCI scores of 49 versus 30 (p < 0.001), and were more likely to be Latinos (21% vs. 13%, p < 0.001) compared to the Standard patients, respectively. The One‐Stop saved 69 575 km in round trips, over 16 tons of travel‐related CO2 emissions, and $8214 U.S. dollars. For patients with Prostate Imaging Reporting & Data System (PIRADS) 3–5, the clinically significant PCa detection (53% vs. 50%, p = 0.55) was similar for the One‐Stop and Standard pathways, respectively.ConclusionsThe One‐Stop PCa diagnostic pathway reduces carbon footprint, distance travelled, and patient‐level cost while maintaining clinical outcomes comparable to the Standard pathway. It facilitates access to tertiary‐level care for minorities and underserved populations.

Energy, environmental footprints and economic benefit of substituting inorganic fertilizer with organic manure for winter wheat in Huanghuaihai Plain

Manure substitution shows promise for nitrogen (N) management, food security, energy balance and environmental costs reduction. However, there is limited research on this practice in the Huanghuaihai Plain. This study aimed to investigate the energy use efficiency, economic benefits, carbon and nitrogen footprint under two types of N fertilizer (U, urea and M, organic manure), two application rates of N (180 kg N ha−1, U1 for 100 % urea and M1 for 100 % organic manure; 90 kg N ha−1, U2 for 50 % urea and M2 for 50 % organic manure) and no fertilizer application treatment (CK) for winter wheat from 2017 to 2019. Results showed that grain yield and agricultural input cost under N application rate of 90 kg N ha−1 was 15.5 % and 7.8 % lower than that of 180 kg N ha−1, respectively, leading to a significant decrease in economic benefit. Under the same N rate, M1 obtained higher grain yield than U1, grain yield of M2 did no differ in that of U2. Total energy inputs and agricultural input costs of M were 9.5 % and 3.6 % lower than U, resulting in higher energy use efficiency and economic benefit. The reduced agricultural input for M was primarily due to a decrease in the application of inorganic fertilizer. Compared with other treatments, U2+M2 obtained higher grain yield, energy use efficiency, and economic benefit. The carbon and nitrogen footprint on unit grain yield of U1 was increased by 13.7 %-24.1 % and 3.9 %-19.6 %, which was attributed to the increase in direct N2O emissions, indirect carbon emission and losses of reactive N from agricultural inputs. Overall, U2+M2 sustained high productivity and reduced the environmental impact. Substituting inorganic fertilizer with organic manure was a promising strategy to improve agricultural production with less agricultural inputs and environmental footprints in the Huanghuaihai Plain.

The effect of failure on energy efficiency in maritime vessels autopilot systems

The increasing demands for energy efficiency and environmental sustainability in the maritime industry have underscored the critical importance of optimizing autopilot systems, which, despite their significance, are often overlooked in ship energy efficiency management. The objective of this study is to enhance the energy efficiency of ships by focusing on the efficiency of autopilot systems, which play a significant role in the management of energy efficiency. The research emphasizes the need for effective decision support systems for ship operators, not only for optimizing ship speeds but also for making informed operational decisions. By utilizing Fuzzy Fault Tree Analysis (FFTA), the study identifies and prioritizes the causes of efficiency losses in autopilot systems and examines their frequency. Based on expert opinions, the research delves into the complexity of autopilot systems and the interactions among various components. Notably, the study highlights the impact of multiple factors on the efficiency of complex autopilot systems, elucidating their relationships through Minimum Cut Sets (MCS) analysis. Furthermore, attention was drawn to the “Improper Alarm Input” event caused by insufficient knowledge and awareness among ship operators, which hinders the effective use of autopilot systems. The findings demonstrate that decision support systems can increase energy efficiency and contribute to the reduction of operational errors by reducing the human factor, which is 99% effective on the “Inefficient Heading Control System”. Additionally, proper utilization of autopilot systems can lead to a decrease in a ship's carbon footprint and operating costs. Overall, the results can affect strategic decisions in ship energy efficiency management and encourage significant steps toward achieving International Maritime Organization's (IMO) sustainability objectives.

Conservation tillage (CT) for climate-smart sustainable intensification: Benchmarking CT to improve soil properties, water footprint and bulb yield productivity in onion cultivation

Environmental sustainability indicators for conservation tillage (CT) in agricultural systems primarily focus on assessing the impacts on soil organic carbon (SOC) and water footprint (WF). One way to improve these indicators is by boosting crop production while minimizing environmental impact through the implementation of sustainable intensification (SI) and climate-smart agriculture (CSA) to ensure food security. Conservation agriculture (CA) based CT practice with crop residue retention has potential for benchmarking the conserving of water in agriculture, improving soil health, crop productivity and ensuring agricultural sustainability. The CT-based water-saving potential in onion cultivation nonetheless remains understudied in Bangladesh. For this, a field experiment was undertaken to assess soil properties and water footprint in onion cultivation in the Charland agroecosystem in Jamalpur, Bangladesh. Three different tillage practices, such as minimum tillage (MT), tractor tillage (TT) and conventional power tillage (PT), and flatbed flood irrigation were introduced with four replications. Tillage practices showed significant positive effects on yield characteristics and bulb yields. The findings indicate that the MT practice in onion (BARI Piaz-4) cultivation resulted in the highest fresh bulb yield of 22.79 t ha−1, followed by TT (20.48 t ha−1) and PT (16.25 t ha−1) practices. The MT practice achieved the highest water footprint (WF) savings of 40% water, where crop biomass, including above and below-ground parts, bulb size, yield characteristics, and yield productivity were significantly increased. The findings also indicate a direct correlation between the water productivity index (WPI), WF and the bulb yield under MT practice. The study's findings favor CT practice and, therefore, suggest a methodology of employing MT practice as a benchmark to increase agricultural water-saving potential. It can also be used as a reference for promoting water conservation practices achieving sustainable development and improving resource efficiency in agriculture.

Fertilizer Industry Innovations Supporting Climate Mitigation

AbstractFertilizers, particularly nitrogen, comprise a large part of the carbon footprint of crop production. The industry is exploring and applying innovations toward reducing emissions of greenhouse gases arising from the manufacture and use of fertilizers. Earn 1 CEU in Nutrient Management by reading this article and taking the quiz at https://web.sciencesocieties.org/Learning‐Center/Courses.

A Review of the Technological Aspects and Process Optimization of Bioethanol Production From Corn Stover Biomass: Pretreatment Process, Hydrolysis, Fermentation, Purification Process, and Future Perspective

ABSTRACTBioethanol, a sustainable energy solution derived from renewable biomass, has gained prominence, with corn stover emerging as a substantial biomass resource in Indonesia. Corn stover, a corn residue, is one of the top three agricultural wastes worldwide and is abundantly available. However, a significant portion of corn stover is burned in fields rather than utilized for bioethanol production, whereas it has potential as a bioethanol feedstock. As the world strives to realize sustainable and environmentally friendly energy security, bioethanol production from corn stover can be one of the solutions to be developed. Nonetheless, the current immaturity of bioethanol production technology is one of the causes of large‐scale production failure. The present paper comprehensively reviews the technological aspects and process optimization of bioethanol production using corn stover as a feedstock comprising pretreatment, hydrolysis, fermentation, and bioethanol purification processes. According to our critical review, ammonia fiber expansion (AFEX) pretreatment is the most effective conventional pretreatment, with glucose yield up to 90%. Moreover, ultrasound appears to be the most viable option for nonconventional pretreatment of corn stover for producing bioethanol. However, combining ultrasound pretreatment and dilute aqueous ammonia produced 80.6% sugar output. Furthermore, enzymatic hydrolysis emerges as the most effective saccharification, yielding up to 81.39%. Moreover, the fermentation process of corn stover with the saccharification and co‐fermentation (SScF) method and the process optimization with response surface methodology (RSM) could produce bioethanol with a concentration of up to 59.8 g/L and 92.07% ethanol yield, respectively. This review also reveals that pervaporation for the purification process is the best choice for producing bioethanol with high purity up to > 99%. In addition, this method could reduce the energy used by 6.6% lower, 24.2% lower carbon footprint, and have the lowest total capital and production costs compared to conventional molecular sieves and extractive distillation. We believe this review article can provide a reference for selecting the best bioethanol production process from corn stover for further research.