Carbon-carbon Bond-forming Reactions Research Articles

ChemInform Abstract: Computational Catalysis Using the Artificial Force Induced Reaction Method

AbstractReview: 33 refs.

Computational Catalysis Using the Artificial Force Induced Reaction Method.

The artificial force induced reaction (AFIR) method in the global reaction route mapping (GRRM) strategy is an automatic approach to explore all important reaction paths of complex reactions. Most traditional methods in computational catalysis require guess reaction paths. On the other hand, the AFIR approach locates local minima (LMs) and transition states (TSs) of reaction paths without a guess, and therefore finds unanticipated as well as anticipated reaction paths. The AFIR method has been applied for multicomponent organic reactions, such as the aldol reaction, Passerini reaction, Biginelli reaction, and phase-transfer catalysis. In the presence of several reactants, many equilibrium structures are possible, leading to a number of reaction pathways. The AFIR method in the GRRM strategy determines all of the important equilibrium structures and subsequent reaction paths systematically. As the AFIR search is fully automatic, exhaustive trial-and-error and guess-and-check processes by the user can be eliminated. At the same time, the AFIR search is systematic, and therefore a more accurate and comprehensive description of the reaction mechanism can be determined. The AFIR method has been used for the study of full catalytic cycles and reaction steps in transition metal catalysis, such as cobalt-catalyzed hydroformylation and iron-catalyzed carbon-carbon bond formation reactions in aqueous media. Some AFIR applications have targeted the selectivity-determining step of transition-metal-catalyzed asymmetric reactions, including stereoselective water-tolerant lanthanide Lewis acid-catalyzed Mukaiyama aldol reactions. In terms of establishing the selectivity of a reaction, systematic sampling of the transition states is critical. In this direction, AFIR is very useful for performing a systematic and automatic determination of TSs. In the presence of a comprehensive description of the transition states, the selectivity of the reaction can be calculated more accurately. For relatively large molecular systems, the computational cost of AFIR searches can be reduced by using the ONIOM(QM:QM) or ONIOM(QM:MM) methods. In common practice, density functional theory (DFT) with a relatively small basis set is used for the high-level calculation, while a semiempirical approach or a force field description is used for the low-level calculation. After approximate LMs and TSs are determined, standard computational methods (e.g., DFT with a large basis set) are used for the full molecular system to determine the true LMs and TSs and to rationalize the reaction mechanism and selectivity of the catalytic reaction. The examples in this Account evidence that the AFIR method is a powerful approach for accurate prediction of the reaction mechanisms and selectivities of complex catalytic reactions. Therefore, the AFIR approach in the GRRM strategy is very useful for computational catalysis.

Positional Selectivity in C-H Functionalizations of 2-Benzylfurans with Bimetallic Catalysts.

Metal-catalyzed carbon-carbon bond-forming reactions are a mainstay in the synthesis of pharmaceutical agents. A long-standing problem plaguing the field of transition metal catalyzed C-H functionalization chemistry is control of selectivity among inequivalent C-H bonds in organic reactants. Herein we advance an approach to direct site selectivity in the arylation of 2-benzylfurans founded on the idea that modulation of cooperativity in bimetallic catalysts can enable navigation of selectivity. The bimetallic catalysts introduced herein exert a high degree of control, leading to divergent site-selective arylation reactions of both sp(2) and sp(3) C-H bonds of 2-benzylfurans. It is proposed that the selectivity is governed by cation-π interactions, which can be modulated by choice of base and accompanying additives [MN(SiMe3)2, M = K or Li·12-crown-4].

ChemInform Abstract: Contemporaneous Dual Catalysis: Aldol Products from Non‐Carbonyl Substrates.

AbstractVanadium‐catalyzed 1,3‐transposition of allenols is coupled with a lanthanum‐catalyzed Meinwald rearrangement of epoxides in situ to form aldol products chemo‐, regio‐, and stereoselectively.

Synthetic Transformations through Alkynoxy-Palladium Interactions and C-H Activation.

Organic synthesis based on straightforward transformations is essential for environmentally benign manufacturing for the invention of novel pharmaceuticals, agrochemicals, and organoelectronic materials in order to ultimately realize a sustainable society. Metal-catalyzed C-H bond-cleaving functionalization has become a promising method for achieving the above goal. For site-selective C-H bond cleavage, so-called directing groups, i.e., ligands attached to substrates, are employed. Commonly utilized directing groups are carbonyls, imines, carboxyls, amides, and pyridyls, which σ-donate electron pairs to metals. On the other hand, unsaturated substrates such as alkenes and alkynes, which participate largely as reactants in organic synthesis, are prepared readily by a wide variety of synthetic transformations and are also employed as reactants in organometallic chemistry. Moreover, such unsaturated groups form complexes with some metals by ligation of their p orbitals via donation and back-donation. However, the use of unsaturated bonds as directing groups has not been studied extensively. We have been involved in the development of methods for the cleavage of C-H bonds by means of transition-metal catalysts to achieve new carbon-carbon bond-forming reactions and incidentally came to focus on the alkynoxy group (-OC≡C-), which shows a ketene-like resonance structure. We expected the alkynoxy group to interact electrophilically with a low-valent transition-metal complex in order to cleave adjacent C-H bonds. In this Account, we summarize our recent achievements on C-H activation based on interactions of palladium with the alkynoxy group in alkynyl aryl ethers. The alkynoxy group plays two roles in the transformation: as a directing group for adjacent C-H bond activation and as an acceptor for the carbon and hydrogen fragments. A typical example is palladium-catalyzed ortho-C-H bond activation in alkynoxyarenes followed by sequential insertion/annulation with internal alkynes and the alkynoxy group to produce 2-methylidene-2H-1-benzopyrans. Mechanistic studies have shown that the presence of both oxygen and alkynyl moieties is essential for selective ortho-C-H bond activation and subsequent annulation. In addition to internal alkynes, norbornene, allenes, isocyanates, and ketenes produce the corresponding oxacycles. It is worthy of note that benzoxadinones formed by the reaction with isocyanates exhibit solid-state luminescence. In addition, 2-methylphenyl alkynyl ethers and 2-alkynoxybiaryls undergo intramolecular annulation at the benzylic γ-position and aryl δ-position via C-H bond activation to give benzofurans and dibenzopyrans, respectively. The disclosed methods allow us to construct useful π-conjugated systems in a straightforward manner.

Palladium Deposited on Naturally Occurring Supports as a Powerful Catalyst for Carbon-Carbon Bond Formation Reactions

Palladium Deposited on Naturally Occurring Supports as a Powerful Catalyst for Carbon-Carbon Bond Formation Reactions

ChemInform Abstract: Cyanoalkylation: Alkylnitriles in Catalytic C—C Bond‐Forming Reactions

AbstractReview: [68 refs.

α-Difluoromethylation on sp(3) Carbon of Nitriles Using Fluoroform and Ruppert-Prakash Reagent.

Difluoromethylation on sp(3) carbon of various nitrile compounds with lithium base and fluoroform (CF3H), which is an ideal difluoromethylating reagent, is shown to provide the α-difluoromethylated nitrile products with an all-carbon quaternary center in moderate to high yields. The Ruppert-Prakash reagent (CF3TMS) is also applicable to the reaction, affording the α-siladifluoromethylated nitrile products, which can be utilized for sequential carbon-carbon bond-forming reactions. These reactions using 1.1 equiv of lithium base, 1.5-2.0 equiv of CF3H or CF3TMS, and easily accessible nitrile derivatives are completed in only a few minutes, resulting in the formation of valuable difluoromethylated compounds.

Cyanoalkylation: Alkylnitriles in Catalytic C-C Bond-Forming Reactions.

Alkylnitriles are one of the most ubiquitous nitrogen-containing chemicals and are widely employed in reactions which result in nitrile-group conversion into other functionalities. Nevertheless, their use as carbon pronucleophiles in carbon-carbon bond-forming reactions has been hampered by difficulties associated mainly with the catalytic generation of active species, that is, α-cyano carbanions or metalated nitriles. Recent investigations have addressed this challenge and have resulted in different modes of alkylnitrile activation. This review illustrates these findings, which have set the foundation for the development of practical and conceptually new catalytic, direct cyanoalkylation methodologies.

Contemporaneous Dual Catalysis: Aldol Products from Non-Carbonyl Substrates.

The aldol reaction represents an important class of atom-economic carbon-carbon bond-forming reactions vital to modern organic synthesis. Despite the attention this reaction has received, issues related to chemo- and regioselectivity as well as reactivity of readily enolizable electrophiles remain. To help overcome these limitations, a new direct approach toward aldol products that does not rely upon carbonyl substrates is described. This approach employs room-temperature contemporaneous lanthanum/vanadium dual catalysis, whereby a vanadium-catalyzed 1,3-transposition of allenols is coupled with a lanthanum-catalyzed Meinwald rearrangement of epoxides in situ to directly form aldol products.

Dosage delivery of sensitive reagents enables glove-box-free synthesis.

Contemporary organic chemists employ a broad range of catalytic and stoichiometric methods to construct molecules for applications in many fields, including material sciences1, pharmaceuticals2–5, agrochemicals, and sensors6. The potential utility of a synthetic method can be greatly reduced if it relies on the use of air- and/or moisture-sensitive reagents or catalysts. Furthermore, many synthetic chemistry laboratories have numerous containers of partially used reagents that have been spoiled by exposure to the ambient atmosphere. This is exceptionally wasteful from both an environmental and a cost perspective. In this manuscript, we report an encapsulation method through which air- and moisture-sensitive sensitive compounds can be rendered stable and stored on a laboratory bench top. We demonstrate this approach in three contexts, by describing single use capsules that contain all of the reagents (i.e., catalysts, ligands, and bases) necessary for palladium-catalyzed carbon–fluorine7–9, carbon–nitrogen10,11, and carbon–carbon12 bond forming reactions. The strategy described in this paper should be broadly applicable to a wide range of reagents and catalysts and should have the power to be transformative in preparative organic chemistry, particularly for inexperienced chemists. In addition, this approach will reduce the amount of tedious and time-consuming weighing procedures for the synthetic chemist performing these techniques on a large number of substrate combinations.

Effects of Molecular Oxygen, Solvent, and Light on Iridium-Photoredox/Nickel Dual-Catalyzed Cross-Coupling Reactions

In order to achieve reproducibility during iridium-photoredox and nickel dual-catalyzed sp(3)-sp(2) carbon-carbon bond-forming reactions, we investigated the role that molecular oxygen (O2), solvent and light-source (CF lamp or blue LED) play in a variety of Ir-photoredox mediated transformations. The presence of O2 was discovered to be important for catalyst activation when air-stable Ni(II) precatalysts were used in DMF under CF lamp irradiation; however, O2 was not required for catalysis when conducted with Ni(COD)2 in the same reaction system. O2 is believed to promote rapid reduction of the Ni(II) precatalyst by Ir(II) to Ni(0). In addition to O2, the effects that solvent and light-source have on the dual-catalyzed decarboxylative cross-coupling reactions will be discussed. These findings have enabled us to develop a more robust dual-catalyzed decarboxylative cross-coupling protocol.

Catalytic asymmetric umpolung reactions of imines.

Imines, carbon-nitrogen double bonds, are fundamentally important functional groups in organic chemistry. This is largely due to the fact that imines act as electrophiles in C–C bond forming reactions towards carbon nucleophiles, thereby serving one of the most widely used precursors for the formation of amines in both synthetic and biosynthetic settings.1–5 If the carbon atom of the imine could be rendered electron-rich, the imine could react as a nucleophile instead of as an electrophile. Such a reversal in the electronic characteristics of the imine functionality would facilitate the development of new chemical transformations that convert imines into amines via C–C bond forming reactions with carbon electrophiles, thereby creating new opportunities for the efficient synthesis of amines. The development of asymmetric ‘umpolung’ reactions of imines remains an uncharted ground, in spite of the far-reaching impact of such reactions in organic synthesis. Here we report the discovery and development of new chiral phase transfer catalysts that promote the highly efficient asymmetric umpolung reactions of imines and enals. These catalysts mediate the deprotonation of imines and direct the 2-azaallylanions thus formed to react in a highly chemoselective, regioselective, diastereoselective and enantioselective fashion with enals. The reaction tolerates a broad range of imines and enals, and can be carried out in high yield with as little as 0.01 mol % catalyst with a moisture and air-tolerant operational protocol. These umpolung reactions provide a conceptually new and practical approach towards chiral amino compounds.

Catalytic Asymmetric 1,4-Addition Reactions of Simple Alkylnitriles.

The development of catalytic asymmetric carbon-carbon bond-forming reactions of alkylnitriles that do not have an activating group at the α-position, under proton-transfer conditions, is a challenging research topic. Here, we report catalytic asymmetric direct-type 1,4-addition reactions of alkylnitriles with α,β-unsaturated amides by using a catalytic amount of potassium hexamethyldisilazide (KHMDS) with a chiral macro crown ether. The desired reactions proceeded in high yields with good diastereo- and enantioselectivities. To our knowledge, this is the first example of catalytic asymmetric direct-type 1,4-addition reaction of alkylnitriles without any activating group at the α-position.

ChemInform Abstract: Chitosan as a Sustainable Organocatalyst: A Concise Overview

AbstractReview: 165 refs.

Evidence for the formation of an enamine species during aldol and Michael-type addition reactions promiscuously catalyzed by 4-oxalocrotonate tautomerase.

The enzyme 4-oxalocrotonate tautomerase (4-OT), which has a catalytic N-terminal proline residue (Pro1), can promiscuously catalyze various carbon-carbon bond-forming reactions, including aldol condensation of acetaldehyde with benzaldehyde to yield cinnamaldehyde, and Michael-type addition of acetaldehyde to a wide variety of nitroalkenes to yield valuable γ-nitroaldehydes. To gain insight into how 4-OT catalyzes these unnatural reactions, we carried out exchange studies in D2 O, and X-ray crystallography studies. The former established that H-D exchange within acetaldehyde is catalyzed by 4-OT and that the Pro1 residue is crucial for this activity. The latter showed that Pro1 of 4-OT had reacted with acetaldehyde to give an enamine species. These results provide evidence of the mechanism of the 4-OT-catalyzed aldol and Michael-type addition reactions in which acetaldehyde is activated for nucleophilic addition by Pro1-dependent formation of an enamine intermediate.

Pd-mediated rapid cross-couplings using [(11) C]methyl iodide: groundbreaking labeling methods in (11) C radiochemistry.

Prof. Bengt Långström is a pioneer in the field of chemistry-driven positron emission tomography (PET) imaging. He has developed a variety of excellent radiolabeling methodologies using the methods of organic chemistry, with the aim of widening the potential of PET in the study of life. Among his groundbreaking achievements in (11) C radiochemistry, there is the discovery of the Pd-mediated rapid cross-coupling reaction using [(11) C]methyl iodide. It was first reported by his Uppsala group in 1994-1995 and was further investigated by his and other groups with a view of enhancing its generality and practicability. This reaction is currently considered one of the basic methods for (11) C-labeling of low-weight organic compounds. This paper presents a short summary of the background and the development of Pd-mediated rapid cross-couplings of [(11) C]methyl iodide, with a focus not only on organostannanes, but also on organoboranes, organozincs, and terminal acetylene compounds. All these reactions have proven to be dependable (11) C-labeling methodologies that use chemically reliable carbon-carbon bond formation reactions.

ChemInform Abstract: Advances in Metal‐catalyzed Cross‐coupling Reactions of Halogenated Quinazolinones and Their Quinazoline Derivatives

AbstractReview: 57 refs.

Syntheses of the smallest carbon nanohoops and the emergence of unique physical phenomena.

The design and construction of non-natural products have fascinated and perplexed organic chemists for years. Their assembly, akin to what has been accomplished for the total synthesis of natural products, has stretched the limits of what can be prepared in the laboratory. Unlike many natural products, however, carbon-rich structures often lack heteroatoms, further complicating their construction. Consider some of the classical molecules in this genre: cubane and dodecahedrane. While highly symmetric, their assembly is far from trivial. These fascinating hydrocarbon targets have fueled the development of carbon-carbon bond-forming reactions, as new methods are needed to access these types of compounds. Among these carbon-rich structures, polycyclic aromatics such as helicenes, fullerenes, and some fullerenes share common ground due to the distortion of one or more aromatic rings out of planarity. Recently added to this group are the [n]cycloparaphenylenes ([n]CPPs), "carbon nanohoops". Here, a linear string of benzene rings connected at the para positions is wrapped back upon itself to form a cyclic structure. Clearly a simple linear p-oligophenylene cannot be cyclized in this manner without extremely harsh reaction conditions. In order to access these structures using solution-phase organic chemistry, clever synthetic strategies that can compensate for this severe distortion are required. Although cycloparaphenylenes can be considered the smallest possible fragment of an armchair carbon nanotube (CNT), they were envisioned as synthetic targets long before CNTs were discovered in 1991. CPP synthesis was first attempted in 1934, almost 70 years before Iijima's first report on CNTs. The long-forgotten targets reemerged in 1993 with a report from Vögtle, though he ultimately was unsuccessful in achieving their synthesis. More than a decade later, in 2008, CPPs succumbed to total synthesis by Jasti and Bertozzi, allowing access to three different-sized carbon nanohoops in milligram quantities. Since then, the Jasti group has embraced the smallest CPPs as inspiring synthetic targets, challenging us to develop new methodology to construct increasingly strained macrocycles. Having recently synthesized [5]-, [6]- and [7]CPP, the three smallest nanohoops synthesized to date, we have been able to realize a variety of new physical phenomena unique to these structures. Perhaps most significantly, unlike linear p-phenylenes and inorganic quantum dots, the HOMO-LUMO gaps of the CPPs narrow with decreasing CPP size. The smallest CPPs discussed in this Account illustrate this feature exceptionally well, as their HOMO-LUMO gaps become narrower than those of even the longest p-polyphenylenes. The smaller CPPs are fascinating from a structural standpoint as well because of the high amount of distortion in each benzene ring. From the synthesis of [7]CPP (84 kcal/mol of strain energy) to that of [5]CPP (119 kcal/mol of strain energy), our laboratory has been able to test the boundaries of synthetic and physical organic chemistry. In this Account, we detail how these challenging macrocycles were synthesized and the unique properties these structures possess.

Functionalized α,α-dibromo esters through Claisen rearrangements of dibromoketene acetals.

Allylic alcohols can be transformed into γ,δ-unsaturated α,α-dibromo esters through a two-step process: formation of a bromal-derived mixed acetal, followed by tandem dehydrobromination/Claisen rearrangement. The scope and selectivity of both steps have been investigated. The product α,α-dibromo esters were subjected to various carbon-carbon bond-forming reactions, oxidations, and lactonizations.