Carbon Capture, Utilization, And Storage Research Articles

Carbon Capture and Utilization Technology Development Opportunities Based on Biomethanation

The paper provides an overview of Power-to-Gas (P2G) technology using biomethanation and a proprietary biocatalyst. It addresses the issue of carbon dioxide (CO2) emissions from fossil fuel combustion and proposes the integration of Carbon Capture Utilization and Storage (CCUS) technologies with P2G processes. Currently, the integration of CCUS and P2G is in conceptual stage. The paper emphasizes the sensitivity of biocatalysts to contamination in feed gases, particularly the negative impact of oxygen on methanation processes. Findings from measurements conducted in 2022 using a lab-scale prototype approve that post-combustion technologies can be successfully integrated into P2G technologies through the utilization of biomethanation processes. Various parameters, such as Carbon Dioxide Conversion (CDC), Volumetric Methane Production (VVD), and Higher Heating Value (HHV), were calculated based on the measured datasets. The high CDC value of 96.65%(V/V) and 68.03%(V/V) of methane content indicates successful integration of the two technologies, while increasing the CO2 source and applying higher pressure in the biomethanation reactor can further enhance VVD. In conclusion, the paper highlights the potential of P2G technology based on biomethanation and its integration with CCUS processes. The results obtained from the lab-scale prototype demonstrate promising conversion rates and suggest avenues for improving VVD.

Promotion of CO2 fracturing for CCUS—the technical gap between theory and practice

CO2, used as an environmentally friendly fracturing fluid, has encountered a bottleneck in development in recent years. Despite great efforts in research work, limited progress has been made in field applications. In this study, an extensive literature review of research work and field cases was performed to summarize the technical issues and challenges of CO2 fracturing. The key issues of CO2 fracturing were analyzed to reveal the gap between fundamental research and field operations. The effects of CO2 properties on fracture creation and proppant transport were synthetically analyzed to extract new common research orientations, with the aim of improving the efficiency of CO2 injection. The hydraulic parameters of CO2 fracturing were compared with those of water-based fracturing fluids, which revealed a theory-practice gap. By studying the developing trends and successful experiences of conventional fluids, new strategies for CO2 fracturing were proposed. We identified that the major theory-practice gap in CO2 fracturing exists in pump rate and operation scale. Consequently, the friction reducer, effects of flow loss (due to leak-off) and distribution (within fracture networks), and shear viscosity of thickened CO2 are key factors in improving both fracture propagation and proppant transport. By increasing the scale of injected CO2, the CO2 fracturing technique can be enhanced, making it an essential option for carbon capture, utilization, and storage (CCUS) to reduce carbon emissions and mitigate climate change.

The carbon-energy-water nexus of the carbon capture, utilization, and storage technology deployment schemes: A case study in China's cement industry

Carbon capture, utilization, and storage (CCUS) technology plays a crucial role in the transition towards low-carbon emissions in the cement industry. However, it also results in numerous energy and water consumption. To formulate proper CCUS deployment strategies, it is essential to optimize spatial CCUS layouts and examine the carbon-energy-water nexus of the technology. This study combines China's cement emission inventory, representing carbon sources, with carbon storage sites data, and develops a source-sink matching model to determine optimal CCUS deployment schemes under different mitigation target scenarios. In addition, the spatial distribution of energy and water consumption impacts, as well as the carbon-energy-water nexus, are evaluated. Results indicate that the deployment of CCUS in 229, 445, and 627 cement plants is necessary to mitigate 20%, 40%, and 60% of carbon emissions in China's cement industry, respectively. The estimated economic costs of these schemes are 79.4, 167.9, and 269.5 billion CNY, posing a significant financial challenge for the industry. Carbon capture technologies greatly influence the carbon-energy-water nexus of the CCUS deployment schemes, with net energy and water consumption ranging from 271.5 to 2410.9 PJ and − 28.5 to 872.4 million m3. Totally, 13–15 provinces achieve synergic carbon mitigation and water extraction effects by using the technologies with low water intensity. Nevertheless, trade-offs between carbon and energy exist regardless the technology. In conclusion, this study provides valuable insights for planning CCUS deployment schemes by revealing the multi-dimensional impacts on economic costs, energy consumption, and water consumption, which supports the decarbonization of China's cement industry.

Investigating the impact of the future carbon market on the profitability of carbon capture, utilization, and storage (CCUS) projects; the case of oil fields in southern Iraq

Carbon capture utilization and storage for enhanced oil recovery (CCUS-EOR) is considered a promising solution to meet future global energy needs while significantly reducing carbon dioxide emissions. However, the future growth of CCUS-EOR is uncertain due to the global economic recession and low oil prices. This research analyzes the impact of uncertain oil and carbon market prices on the economic value of a CCUS-EOR project which contributes to appropriate investment and future policy decisions. To explore the potential trade-offs between available carbon dioxide (CO2) quantities for trading or injection for enhanced oil recovery, the market's trading mechanism is analyzed by predicting future oil and carbon prices. The forecasted market prices are then used in an optimization model to estimate the optimal cumulative cash flow from implementing a proposed CCUS-EOR project to capture CO2 from the Hartha power plant located in the southern Basra Province of Iraq, considering three different oil fields of Rumaila, Nassriya, and Noor. The results revealed that the profitability of the proposed CCUS-EOR project is affected by both oil and carbon market prices, and a higher carbon price is needed to compensate for the financial setbacks, resulting from reduced oil prices. The research also features the strategic decision-making of oil fields across different sizes in response to various price scenarios. The medium-sized fields consistently prioritize carbon injection for enhanced oil recovery (EOR) over market trading. In contrast, small and giant fields adapt their approach based on the prevailing market price dynamics.

Diagenetic Products, Settings and Evolution of the Presalt Succession in the Northern Campos Basin, Brazil

Abstract Despite all the effort made towards an understanding of the sedimentary, tectonic, and diagenetic evolution of the presalt sequence and the Pre-Salt reservoirs of the North Campos Basin (East Brazil), two knowledge gaps have yet to be filled: 1) a detailed study of diagenesis in the crystalline basement and rift phases, and 2) the timing of diagenetic events that affected the presalt succession. In this study, samples from these geologic units were analysed for mineral composition and paragenetic evolution, fluid temperature and salinity, stable isotope compositions, and LA-ICP-MS derived U-Pb ages of carbonate phases. The U-Pb ages of replacive and vein-filling cements reveal three tectono-diagenetic events, named Barremian-Aptian (BADE, 125-117 Ma), Albo-Cenomanian (ACDE, 103-98 Ma), and Campanian-Maastrichtian (CMDE, 83-70 Ma). Each phase is characterised by distinct minerals, precipitation temperatures, and burial conditions. The hydrothermal qualifier, identified by the temperature contrast between fluid and host rock, was initially high during BADE, then diminished over time (through ACDE) until it achieved equilibrium with the host rocks during CMDE. Diagenetic events are not coeval with magmatism but do coincide with known regional tectonic events described in the literature and are interpreted to be the result of increasing intraplate stresses. Multidisciplinary studies that include diagenetic events constrained by geochronological data will certainly lead to more robust conceptual geologic models, and therefore, to a more reliable management of resources and strategies such as Enhance Oil Recovery (EOR), Carbon Capture, Utilisation and Storage (CCUS), and drinking water. Supplementary material at https://doi.org/10.6084/m9.figshare.c.7103900

An Investigation of Gas-Fingering Behavior during CO2 Flooding in Acid Stimulation Formations

Summary CO2 flooding is emerging as a pivotal technique used extensively for carbon capture, utilization, and storage (CCUS) strategies. Acid stimulation is one common technique widely used to improve well-formation connectivity by creating wormholes. This work is motivated to investigate the gas-fingering behavior induced by acid stimulation during CO2 flooding. We present an integrated simulation framework to couple the acid stimulation and CO2 flooding processes, in which the two-scale continuum model is used to model the development of wormhole dissolution patterns. Then, sensitivity case simulations are conducted through the equation of state (EOS)–based compositional model to further analyze the CO2 fingering behavior in acid stimulation formations separately under immiscible and miscible conditions. Results demonstrate that for acid stimulation, the typical dissolution patterns and the optimal acid injection rate corresponding to the minimum acid breakthrough volume observed in the laboratory are prevalent in field-scale simulations. For CO2 flooding simulation, the dissolution patterns trigger CO2 fingering (bypassing due to the high conductivity of wormholes) in the stimulated region, and a lateral boundary effect eliminating fingers exerts its influence over the system through transverse mixing. The optimal acid injection rate varies when the focus of interest changes from the minimum acid breakthrough volume to CO2 flooding performance. The best CO2 flooding performance is always observed in uniform dissolution, and the dissolution patterns have a greater influence on the performance under miscible conditions. This work provides technical and theoretical support for the practical application of acid stimulation and CO2 flooding.

Novel material to enhance the integrity of CCUS cement sheath: Exploration and application of calcium aluminate cement

Carbon dioxide (CO2) emissions are being reduced using the technique known as CCUS (Carbon Capture, Utilization, and Storage). At present, cementing cement paste based on ordinary silicate cement (OPC) and compounded with CO2 corrosion-resistant materials are often used in CCUS wells. CAC cement is characterised by low alkaline hydration content and its study in CCUS wells has rarely been reported. Therefore, CAC cement will be a new cement material for CCUS wells. In this study, we have developed an experimental device to simulate the working conditions of CCUS based on the actual well conditions of CCUS and investigated the effects of stress-coupled CO2 corrosion environment on the performance of CAC cement. According to the experimental findings, CAC cement's compressive strength degraded at a rate of 30.6% after 60 days of CO2 corrosion, which was lower than that of OPC cement (38.3%). When compared to OPC cement, the peak strain and stress of CAC cement increased by 57.2% and 7.85%, respectively. Furthermore, compared to OPC cement sheath, the CAC cement sheath's bearing capacity increased by 8 MPa after stress corrosion, and the crack area of the CAC cement sheath after failure was considerably smaller at 275 mm3 than at 735 mm3. Additionally, after being subjected to stress-coupled CO2 corrosion, the integrity of the CAC cement sheath was much superior to that of the OPC cement sheath, offering a fresh viewpoint for building CCUS cement slurry systems.

Time Lapse Measurement of Reservoir’s Parameters Change due to CO2 Injection in Parigi Carbonate West Java

CO2 injection is a process that involves injecting carbon dioxide gas into various substances or environments for different purposes. This technique, also called Carbon Capture and Storage (CCS) or Carbon Capture, Utilization, and Storage (CCUS), aims to prevent or reduce carbon dioxide emissions from reaching the atmosphere as they would affect climate change and also global warming. CCUS can also use the captured carbon dioxide for various purposes, such as enhancing oil recovery, producing fuels, chemicals, or building materials, or storing it underground or underwater. In this study, we investigated the phenomena of CO2 injection in Parigi carbonate rock from West Java. Our study involved various laboratory measurements of Parigi carbonate rock, focusing on changes in porosity due to CO2 injection. The porosity changes were observed using micro images analysis from microscope time-lapse analysis, CT-Scan, and laboratory helium porosity meter. The laboratory measurements of CO2 injection in brine water showed that the pH of the water can decrease to below 5, creating an acidic environment that induces dissolution of the pore structure. We measure the effect of CO2 injection to the Parigi carbonate samples by time lapse measurement strategy. Results of the laboratory measurements showed that the porosity increased during CO2 injection and the mass of the samples decreased during the CO2 injection process. These phenomena suggest that CO2 may induce dissolution of carbonate rock. Furthermore, the changes in porosity confirm that there is a chemical reaction during CO2 injection processes in Parigi carbonate.

Towards the prospect of carbon-neutral power system 2060: A Power-Meteorology-Society systematic view

With the target of achieving carbon peaking and neutrality in the power sector in China, both State Grid and China Southern Power Grid have made plans of a rapid increase of renewables in future years towards 2060. However, considering the interactions between the power system and meteorological, society factors, whether those plans would lead to CO2 emission peak in 2030 and carbon neutrality in 2060 is still questionable and needs further analysis. Therefore, a Power-Meteorology-Society System is formulated and interactions between these factors will impact the CO2 emission of the power system is studied. Case study shows that these environmental, social factors as well as their interactions will have significant negative impact to the CO2 emission reduction in China's power grid; With current trend of generation and transmission development and higher-than-expected CO2 emission, while the grid could still reach its target of carbon peak in 2030, there will be some challenge for the grid to reach carbon neutrality in the year 2060. Based on that, the authors analyze some potential solutions such as transmission construction, energy storage and the Carbon Capture, Utilization and Storage (CCUS), and try to find a relatively cost-benefit path to reach carbon-neutrality for the grid in 2060.

Characterization of the Macroscopic Impact of Diverse Microscale Transport Mechanisms of Gas in Micro-Nano Pores and Fractures

The objective of this study is to construct a refined microscopic transport model that elucidates the transport mechanisms of gas flow within micro-nano pores and fractures. The collective impact of various microscopic transport mechanisms was explained through the apparent permeability model, specifically related to gases such as methane and carbon dioxide, within the shale matrix. The apparent permeability models, taking into account microscopic transport mechanisms such as slippage flow, Knudsen diffusion, transition flow, and surface diffusion, were established individually. Subsequently, the influencing factors on apparent permeability were analyzed. The results demonstrate that the apparent permeability of the shale reservoir matrix is significantly influenced by pore pressure, temperature, pore size, and total organic carbon (TOC). As pressure decreases, the apparent permeability of Knudsen diffusion and surface diffusion increases, while the apparent permeability of slippage flow decreases. In addition, the apparent permeability of the reservoir matrix initially decreases and then increases. With increasing temperature, the apparent permeability of slippage flow, Knudsen diffusion, and surface diffusion all increase, as does the apparent permeability of the reservoir matrix. As pore size increases, the apparent permeability of surface diffusion and Knudsen diffusion decreases, while the apparent permeability of slippage flow and the reservoir matrix increases. Furthermore, an increase in TOC leads to no change in the apparent permeability of slippage flow and Knudsen diffusion, but an increase in the apparent permeability of surface diffusion and the reservoir matrix. The model presented in this paper enhances the multi-scale characterization of gas microflow mechanisms in shale and establishes the macroscopic application of these micro-mechanisms. Moreover, this study provides a theoretical foundation for the implementation of carbon capture, utilization, and storage (CCUS) in shale gas production.

Denitrification induced calcium carbonate precipitation by indigenous microorganisms in coal seam and its application potential in CO2 geological storage

Carbon capture, utilization and storage (CCUS) is an effective means to achieve dual carbon goals. However, the leakage of CO2 is a considerable risk. In this work, a new method was proposed to reduce the leakage of CO2 in coal seam by denitrification induced carbonate precipitation (DICP) using indigenous microorganisms (IM). After enrichment and optimization, the mineralization efficiency of IM reached 90.47% and Pseudomonas was dominated. The degradation of negatively charged groups in extracellular polymeric substances (EPS), especially carboxyl, was essential to the formation of CaCO3. The mineralization efficiency even increased under the presence of coal while the pore development was significantly reduced by the formed bio-minerals. The microflora was proven to resist the negative effects of CO2 on bacterial growth and metabolism. Then, a conceptual model of industrial application was proposed. Our results demonstrated the good application potential of DICP technology in coal seam CO2 geological storage.

Using mining waste for CO2 sequestration: exploring opportunities through mineral carbonation, nature-based solutions, and CCUS

ABSTRACT Using mining waste for CO2 sequestration presents a promising solution for managing waste and reducing greenhouse gas emissions. This article provides a comprehensive overview of established CO2 sequestration methods that can be applied to mining waste eligible for such application. Three techniques were considered: 1) passive mineral carbonation; 2) a nature-based solution (NBS); and 3) carbon capture, utilisation, and storage (CCUS). Passive mineral carbonation involves exposing mining waste rich in Ca and Mg silicates to atmospheric CO2. NBS explores the reclamation of disposal areas, estimating the carbon sequestration by topsoil, organic amendments, and revegetation. CCUS presents some storage possibilities with CO2 injection into waste piles and utilisation by incorporating waste and CO2 into cement products. Furthermore, an innovative proposal for injecting CO2 into surface and underground coal mining waste disposal areas was described as a potential action. The strategies presented in this article can be considered to offset CO2 emissions from mining projects while also contributing to waste management and more sustainable production.

Carbon Capture, Utilization and Storage (CCUS) Technology Development

Carbon capture, utilization and storage technology is one of the hot topics in the world in recent years. In the context of global climate change and energy security, reducing carbon dioxide emissions and improving energy efficiency have become the common focus of governments and scientists. Carbon capture utilization and storage technology is a technology that captures carbon dioxide and uses or stores it through various ways. This paper will discuss the development process, application scenarios and future prospects of this technology.

A review on geological storage of marine carbon dioxide: Challenges and prospects

Carbon capture, utilization, and storage (CCUS) is believed to be the most promising technology to mitigate climate change and global temperature rise. As an effective method for reducing carbon emissions, carbon dioxide (CO2) storage on the seabed can be achieved by injecting captured CO2 from offshore platforms into subsea storage sites, such as the sediment layers, depleted oil and gas reservoirs and deep saline aquifers, thereby permanently removing it from the atmosphere. Additionally, hundreds to thousands of meters of seawater above seabed storage layers provide naturally high seawater pressure and abundant barrier settings that can reduce leakage risk. Consequently, this has become an ideal storage location for long-term CO2 storage. In order to thoroughly investigate the mechanism and potential of marine CO2 storage and promote further development of CCUS, this paper provides a comprehensive description of theoretical research of marine CO2 geological storage, including storage mechanisms, storage capacity, wellbore flow, CO2 migration, cap rocks integrity and CO2 leakage monitoring. The implementation status of global engineering projects is summarized. Currently, there are relatively few successful marine storage projects globally, with the majority of others still in the research and testing stages. Finally, the challenges and prospects of marine CO2 storage are also discussed. This review demonstrates the enormous potential and promising future of marine CO2 storage, but there are also leakage risks. It can be avoided through in-depth theoretical research to clarify the entire process of storage mechanisms and take corresponding technological measures. Ultimately, a new technology for large-scale efficient injection and enhanced storage of marine CO2 storage will be formed.

Smart predictive viscosity mixing of CO2–N2 using optimized dendritic neural networks to implicate for carbon capture utilization and storage

Crucial for carbon capture, utilization, and storage (CCUS) initiatives and diverse industries, heat transfer underscores the need for a precise assessment of carbon dioxide (CO2) and nitrogen (N2) viscosities in gaseous blends across various temperatures. This research pioneers an intelligent model by enhancing the dendritic neural regression (DNR) framework, employing the Seagull Optimization Algorithm with Marine Predator Algorithm (SOAMPA) for optimal predictions. Leveraging recent advancements in metaheuristic optimization techniques, the study reveals the superior performance of the novel SOAMPA approach in predictive accuracy, marking a significant breakthrough in predicting CO2-N2 mixture viscosities with implications for advancing CCUS projects and diverse industries. The optimized DNR model, empowered by the modified SOAMPA optimization technique, contributes to estimating the viscosity of N2-CO2 mixture gases. Utilizing inputs like pressure, temperature, mole fraction of N2, and model fraction of CO2, the models are trained and tested on a dataset comprising over 3030 data samples from public literature. Key contributions encompass proposing an optimized DNR approach, introducing the modified SOAMPA technique, and demonstrating its superiority over established optimization methods in conjunction with the traditional DNR model for predicting viscosity based on real experimental datasets.

Public perception and acceptance of CCUS: preliminary findings of a qualitative case study in Greece

The development and implementation of carbon capture, utilisation and storage (CCUS) technologies plays an increasingly important part in European Union (EU) and global decarbonisation policies and strategies that seek to address climate change to achieve the Paris Agreement goals. Several studies have shown the important role social acceptance plays in determining the outcomes of CCUS projects and how social acceptance is shaped by the national and local contexts. Yet most studies on CCUS and social acceptance have focused on countries in northern Europe and North America despite the increasing numbers of CCUS projects in other regions of the world. This study seeks to help address this gap by conducting a case study on how local dynamics shaped people's acceptance and awareness of CCUS in a Greek community. Based on semi-structured interviews with six community members near a CCUS pilot plant, this single case study explores the factors and dynamics that shaped the interviewees' perceptions of CCUS technologies. Our findings indicate that, despite the low level of awareness of CCUS technologies, participants could draw on their situated knowledge to identify potential drawbacks with their application. We identified scepticism regarding the adoption of new technologies and the organisations involved based on past experiences, and a notable lack provision of technology and location-specific information as well public engagement by the project consortium. Our recommendations for future projects and community engagement include the early involvement of the public in project development, location-based transparent information, appropriate channels to facilitate knowledge exchange, and educational initiatives to build communities' capability to influence projects.

A multi-mechanism numerical simulation model for CO2-EOR and storage in fractured shale oil reservoirs

Under the policy background and advocacy of carbon capture, utilization, and storage (CCUS), CO2-EOR has become a promising direction in the shale oil reservoir industry. The multi-scale pore structure distribution and fracture structure lead to complex multiphase flow, comprehensively considering multiple mechanisms is crucial for development and CO2 storage in fractured shale reservoirs. In this paper, a multi-mechanism coupled model is developed by MATLAB. Compared to the traditional Eclipse 300 and MATLAB Reservoir Simulation Toolbox (MRST), this model considers the impact of pore structure on fluid phase behavior by the modified Peng–Robinson equation of state (PR-EOS), and the effect simultaneously radiate to Maxwell–Stefan (M–S) diffusion, stress sensitivity, the nano-confinement (N-C) effect. Moreover, a modified embedded discrete fracture model (EDFM) is used to model the complex fractures, which optimizes connection types and half-transmissibility calculation approaches between non-neighboring connections (NNCs). The full implicit equation adopts the finite volume method (FVM) and Newton–Raphson iteration for discretization and solution. The model verification with the Eclipse 300 and MRST is satisfactory. The results show that the interaction between the mechanisms significantly affects the production performance and storage characteristics. The effect of molecular diffusion may be overestimated in oil-dominated (liquid-dominated) shale reservoirs. The well spacing and injection gas rate are the most crucial factors affecting the production by sensitivity analysis. Moreover, the potential gas invasion risk is mentioned. This model provides a reliable theoretical basis for CO2-EOR and sequestration in shale oil reservoirs.

Towards the co-benefits of carbon capture, utilization and sequestration: A life cycle assessment study for steel slag disposal

Achieving decarbonization in the steel industry is of paramount importance for global carbon neutrality. Given the unavoidable generation of calcium-containing steel slag and carbon-rich flue gas emissions in the steelmaking process, steel slag carbonation is considered a CCUS technology capable of achieving pollution and carbon reduction in the steel industry. This study conducts a life cycle assessment (LCA) of the environmental impacts generated within the system boundaries of mainstream hot braising steel slag treatment and a novel carbonation steel slag approach. Results of the research demonstrate that the carbonation route based on carbon capture, utilization, and storage (CCUS) technology reduces the global warming potential (GWP) by 480% compared to the mainstream hot braising route, yielding −76.78 kg CO2 eq./t steel slag. The carbonation route also mitigates the environmental impact of pollutant emissions; however, it introduces a burden shifting associated with energy and resource consumption. Furthermore, to tackle the challenges of industrial application of steel slag carbonation, this study has explored upgrading schemes and proposed a future carbonation steel slag route that achieves process upgrades. By enabling carbonation of flue gas and improving carbonation efficiency, this route is forecasted to elevate the potential of carbon footprint reduction from 5% to 15% throughout the entire life cycle of steelmaking process. The study confirms that steel slag carbonation is a viable carbon-negative technology, delivering a substantiated CCUS solution for achieving co-benefits of pollution and carbon reduction in the steel industry.

Medium and Long-term Carbon Emission Projections and Emission Reduction Potential Analysis of the Lingang Special Area Based on the LEAP Model

Based on the existing statistical data of the Lingang Special Area in Shanghai and considering its future socio-economic development， industrial structure， and technological development， a LEAP-Lingang model was developed to analyze the evolution trends of energy demand and carbon emissions under the baseline scenario， low-carbon scenario， and enhanced low-carbon scenario. To enhance the prediction accuracy of the model， the Logistic population growth model was used to predict future population data， and the learning curve model was used to simulate the cost evolution trend of related carbon reduction technologies. In addition， an economic evaluation model for carbon reduction technologies was developed， and the economic costs and emission reduction potential of typical carbon reduction technologies were evaluated by drawing a marginal emission reduction cost curve. The results showed that under the enhanced low-carbon scenario， the renewable energy accounted for 69% of the primary energy consumption， and the electric energy accounted for 91% of the terminal energy demand in 2060. The Lingang Special Area could achieve carbon peak by 2030， and the carbon emissions in 2060 were predicted to decrease by 94% compared to that in the baseline scenario. In terms of contribution to emission reduction， clean energy substitution， industrial structure optimization， and terminal energy efficiency improvement played a key role in reducing carbon emissions near the port. In the medium term （until 2035）， they were predicted to contribute 35.1%， 27.3%， and 16.2% of carbon emissions， respectively， and in the long term （until 2060）， they should contribute 50.6%， 8.75%， and 7.7% of carbon emissions， respectively. Regarding specific carbon reduction technologies， hydrogen power generation； water electrolysis for hydrogen； and carbon capture， utilization， and storage （CCUS） technology were of great significance for achieving net-zero emissions， but the costs of emission reduction were relatively high. The research results can provide ideas and references for the low-carbon and green development of the Lingang Special Area and related areas.

Advancing PetroChina’s Development Strategies for Low-Permeability Oil Reservoirs

Based on PetroChina’s status and situation of low-permeability oil reservoir development, this paper analyzes the key common issues in the production capacity construction of new oilfields, the stable production of old oilfields, and enhanced oil recovery, and, in connection with the progress made in major development technologies and the results of major development tests for low-permeability oil reservoirs in recent years, puts forward the technical countermeasures and development directions. For optimizing the development of low-grade reserves, a comprehensive life-cycle development plan is essential, alongside experimenting with gas injection and energy supplementation in new fields. Addressing challenges in reservoir classification, multidisciplinary sweet spot prediction, and displacement–imbibition processes can significantly boost well productivity. In fine water flooding reservoirs, the focus should shift to resolving key technological challenges like dynamic heterogeneity characterization, and functional and nano-intelligent water flooding. For EOR, accelerating the application of carbon capture, utilization, and storage (CCUS) advancements, along with air injection thermal miscible flooding, and middle-phase microemulsion flooding, is crucial. This approach aims to substantially enhance recovery and establish a new model of integrated secondary and tertiary recovery methods.