Capsid Pressure Research Articles

'SAXS-osmometer' method provides measurement of DNA pressure in viral capsids and delivers an empirical equation of state.

We present a novel method that provides a measurement of DNA pressure in viral capsids using small angle X-ray scattering (SAXS). This method, unlike our previous assay, does not require triggering genome release with a viral receptor. Thus, it can be used to determine the existence of a pressurized genome state in a wide range of virus systems, even if the receptor is not known, leading to a better understanding of the processes of viral genome uncoating and encapsidation in the course of infection. Furthermore, by measuring DNA pressure for a collection of bacteriophages with varying DNA packing densities, we derived an empirical equation of state (EOS) that accurately predicts the relation between the capsid pressure and the packaged DNA density and includes the contribution of both DNA-DNA interaction energy and DNA bending stress to the total DNA pressure. We believe that our SAXS-osmometer method and the EOS, combined, provide the necessary tools to investigate physico-chemical properties of confined DNA condensates and mechanisms of infection, and may also provide essential data for the design of viral vectors in gene therapy applications and development of antivirals that target the pressurized genome state.

Ring-stacked capsids of white spot syndrome virus and structural transitions with genome ejection.

White spot syndrome virus (WSSV) is one of the largest DNA viruses and the major pathogen responsible for white spot syndrome in crustaceans. The WSSV capsid is critical for genome encapsulation and ejection and exhibits the rod-shaped and oval-shaped structures during the viral life cycle. However, the detailed architecture of the capsid and the structural transition mechanism remain unclear. Here, using cryo-electron microscopy (cryo-EM), we obtained a cryo-EM model of the rod-shaped WSSV capsid and were able to characterize its ring-stacked assembly mechanism. Furthermore, we identified an oval-shaped WSSV capsid from intact WSSV virions and analyzed the structural transition mechanism from the oval-shaped to rod-shaped capsids induced by high salinity. These transitions, which decrease internal capsid pressure, always accompany DNA release and mostly eliminate the infection of the host cells. Our results demonstrate an unusual assembly mechanism of the WSSV capsid and offer structural insights into the pressure-driven genome release.

Structural basis for genome packaging, retention, and ejection in human cytomegalovirus

How the human cytomegalovirus (HCMV) genome—the largest among human herpesviruses—is packaged, retained, and ejected remains unclear. We present the in situ structures of the symmetry-mismatched portal and the capsid vertex-specific components (CVSCs) of HCMV. The 5-fold symmetric 10-helix anchor—uncommon among known portals—contacts the portal-encircling DNA, which is presumed to squeeze the portal as the genome packaging proceeds. We surmise that the 10-helix anchor dampens this action to delay the portal reaching a “head-full” packaging state, thus facilitating the large genome to be packaged. The 6-fold symmetric turret, latched via a coiled coil to a helix from a major capsid protein, supports the portal to retain the packaged genome. CVSCs at the penton vertices—presumed to increase inner capsid pressure—display a low stoichiometry, which would aid genome retention. We also demonstrate that the portal and capsid undergo conformational changes to facilitate genome ejection after viral cell entry.

Pressurized DNA state inside herpes capsids-A novel antiviral target.

Drug resistance in viruses represents one of the major challenges of healthcare. As part of an effort to provide a treatment that avoids the possibility of drug resistance, we discovered a novel mechanism of action (MOA) and specific compounds to treat all nine human herpesviruses and animal herpesviruses. The novel MOA targets the pressurized genome state in a viral capsid, “turns off” capsid pressure, and blocks viral genome ejection into a cell nucleus, preventing viral replication. This work serves as a proof-of-concept to demonstrate the feasibility of a new antiviral target—suppressing pressure-driven viral genome ejection—that is likely impervious to developing drug resistance. This pivotal finding presents a platform for discovery of a new class of broad-spectrum treatments for herpesviruses and other viral infections with genome-pressure-dependent replication. A biophysical approach to antiviral treatment such as this is also a vital strategy to prevent the spread of emerging viruses where vaccine development is challenged by high mutation rates or other evasion mechanisms.

CryoEM structure of the tegumented capsid of Epstein-Barr virus

Epstein-Barr virus (EBV) is the primary cause of infectious mononucleosis and has been shown to be closely associated with various malignancies. Here, we present a complete atomic model of EBV, including the icosahedral capsid, the dodecameric portal and the capsid-associated tegument complex (CATC). Our in situ portal from the tegumented capsid adopts a closed conformation with its channel valve holding the terminal viral DNA and with its crown region firmly engaged by three layers of ring-like dsDNA, which, together with the penton flexibility, effectively alleviates the capsid inner pressure placed on the portal cap. In contrast, the CATCs, through binding to the flexible penton vertices in a stoichiometric manner, accurately increase the inner capsid pressure to facilitate the pressure-driven genome delivery. Together, our results provide important insights into the mechanism by which the EBV capsid, portal, packaged genome and the CATCs coordinately achieve a pressure balance to simultaneously benefit both viral genome retention and ejection.

Pressure-driven release of viral genome into a host nucleus is a mechanism leading to herpes infection.

Many viruses previously have been shown to have pressurized genomes inside their viral protein shell, termed the capsid. This pressure results from the tight confinement of negatively charged viral nucleic acids inside the capsid. However, the relevance of capsid pressure to viral infection has not been demonstrated. In this work, we show that the internal DNA pressure of tens of atmospheres inside a herpesvirus capsid powers ejection of the viral genome into a host cell nucleus. To our knowledge, this provides the first demonstration of a pressure-dependent mechanism of viral genome penetration into a host nucleus, leading to infection of eukaryotic cells.

Exploring the Balance between DNA Pressure and Capsid Stability in Herpesviruses and Phages.

We have recently shown in both herpesviruses and phages that packaged viral DNA creates a pressure of tens of atmospheres pushing against the interior capsid wall. For the first time, using differential scanning microcalorimetry, we directly measured the energy powering the release of pressurized DNA from the capsid. Furthermore, using a new calorimetric assay to accurately determine the temperature inducing DNA release, we found a direct influence of internal DNA pressure on the stability of the viral particle. We show that the balance of forces between the DNA pressure and capsid strength, required for DNA retention between rounds of infection, is conserved between evolutionarily diverse bacterial viruses (phages λ and P22), as well as a eukaryotic virus, human herpes simplex 1 (HSV-1). Our data also suggest that the portal vertex in these viruses is the weakest point in the overall capsid structure and presents the Achilles heel of the virus's stability. Comparison between these viral systems shows that viruses with higher DNA packing density (resulting in higher capsid pressure) have inherently stronger capsid structures, preventing spontaneous genome release prior to infection. This force balance is of key importance for viral survival and replication. Investigating the ways to disrupt this balance can lead to development of new mutation-resistant antivirals. A virus can generally be described as a nucleic acid genome contained within a protective protein shell, called the capsid. For many double-stranded DNA viruses, confinement of the large DNA molecule within the small protein capsid results in an energetically stressed DNA state exerting tens of atmospheres of pressures on the inner capsid wall. We show that stability of viral particles (which directly relates to infectivity) is strongly influenced by the state of the packaged genome. Using scanning calorimetry on a bacterial virus (phage λ) as an experimental model system, we investigated the thermodynamics of genome release associated with destabilizing the viral particle. Furthermore, we compare the influence of tight genome confinement on the relative stability for diverse bacterial and eukaryotic viruses. These comparisons reveal an evolutionarily conserved force balance between the capsid stability and the density of the packaged genome.

Physical Evolution of Pressure-Driven Viral Infection

Physical Evolution of Pressure-Driven Viral Infection

Influence of Internal Capsid Pressure on Viral Infection by Phage λ

Ejection of the genome from the virus, phage λ, is the initial step in the infection of its host bacterium. In vitro, the ejection depends sensitively on internal pressure within the virus capsid; however, the in vivo effect of internal pressure on infection of bacteria is unknown. Here, we use microfluidics to monitor individual cells and determine the temporal distribution of lysis due to infection as the capsid pressure is varied. The lysis probability decreases markedly with decreased capsid pressure. Of interest, the average lysis times remain the same but the distribution is broadened as the pressure is lowered.

Shepherd model for knot-limited polymer ejection from a capsid

We construct a tractable model to describe the rate at which a knotted polymer is ejected from a spherical capsid via a small pore. Knots are too large to fit through the pore and must reptate to the end of the polymer for ejection to occur. The reptation of knots is described by symmetric exclusion on the line, with the internal capsid pressure represented by an additional biased particle that drives knots to the end of the chain. We compute the exact ejection speed for a finite number of knots L and find that it scales as 1 / L . We establish a mapping to the solvable zero-range process. We also construct a continuum theory for many knots that matches the exact discrete theory for large L.

A virus DNA gate: Zipping and unzipping the packed viral genome

Tailed bacterial viruses (bacteriophages) are ubiquitously distributed in nature and are likely the most abundant organisms on the biosphere (1). Spending most of their time outside of the host, a bacterial cell, in often hostile external environments, they come to “life” upon encountering the receptor molecules on the host cell surface. The virus consists of a head (capsid) into which the DNA (genome) is packaged and a tail that delivers the genome into the bacterium. The capsid is pressurized because of packing of highly negatively-charged, relatively rigid dsDNA to near-crystalline density (≈500 μg/mL). The internal capsid pressure, ≈6 MPa or >10 times that of bottled champagne (2), provides a driving force for delivery of viral genome into host cell. One of the longstanding questions in phage biology has been how these viruses contain the DNA pressure and trigger release only upon recognition of a specific host cell. In this issue of PNAS, a study by Lhuillier et al. (3) describes the pseudoatomic structure of a DNA gate from the Bacillus subtilis bacteriophage SPP1, which “zips” the capsid after the genome is packaged and unzips it when the virus is ready to infect the host. It is a compelling story, which began with the first in vitro virus assembly experiments described by Edgar and Wood >40 years ago (4) and is applicable not only to phages but also to large eukaryotic viruses such as herpes viruses.

Internal Capsid-Pressure Dependence of Viral Infection by Phage Lambda

Ejection of the genome from the virus, phage λ, is the initial step in the infection of its host bacterium. In vitro, the ejection depends sensitively on internal pressure within the virus capsid; however, the effect of internal pressure on infection of bacteria is unknown. Here, we use microfluidics to monitor individual cells and determine the temporal distribution of lysis due to infection as the capsid pressure is varied. The lysis probability decreases markedly with decreased capsid pressure. Interestingly, the average lysis times remain the same, but the distribution is broadened, as the pressure is lowered.

Charting the Structure and Energetics of Packaged DNA in Bacteriophages

Many bacterial viruses resort to pressure in order to infect bacteria, e.g., lambda phage stores its dsDNA genome at surprisingly high pressure and then uses this pressure to drive delivery of the genome. We report on a biophysical interrogation of the DNA configuration and pressure in lambda phage by combining structural and thermodynamic measurements with theoretical modeling. Changes in DNA organization in the capsid are monitored using solution small angle x-ray scattering (SAXS). We vary the DNA-DNA repulsion and DNA bending contributions to the capsid pressure by changing salt concentrations and packaged length, and augment SAXS data with osmotic stress measurements to elicit the evolving structure and energetics of the packaged DNA.

Packaging of a Unit-Length Viral Genome: The Role of Nucleotides and the gpD Decoration Protein in Stable Nucleocapsid Assembly in Bacteriophage λ

The developmental pathways for a variety of eukaryotic and prokaryotic double-stranded DNA viruses include packaging of viral DNA into a preformed procapsid structure, catalyzed by terminase enzymes and fueled by ATP hydrolysis. In most instances, a capsid expansion process accompanies DNA packaging, which significantly increases the volume of the capsid to accommodate the full-length viral genome. “Decoration” proteins add to the surface of the expanded capsid lattice, and the terminase motors tightly package DNA, generating up to ∼ 20 atm of internal capsid pressure. Herein we describe biochemical studies on genome packaging using bacteriophage λ as a model system. Kinetic analysis suggests that the packaging motor possesses at least four ATPase catalytic sites that act cooperatively to effect DNA translocation, and that the motor is highly processive. While not required for DNA translocation into the capsid, the phage λ capsid decoration protein gpD is essential for the packaging of the penultimate 8–10 kb (15–20%) of the viral genome; virtually no DNA is packaged in the absence of gpD when large DNA substrates are used, most likely due to a loss of capsid structural integrity. Finally, we show that ATP hydrolysis is required to retain the genome in a packaged state subsequent to condensation within the capsid. Presumably, the packaging motor continues to “idle” at the genome end and to maintain a positive pressure towards the packaged state. Surprisingly, ADP, guanosine triphosphate, and the nonhydrolyzable ATP analog 5'-adenylyl-beta,gamma-imidodiphosphate (AMP–PNP) similarly stabilize the packaged viral genome despite the fact that they fail to support genome packaging. In contrast, the poorly hydrolyzed ATP analog ATP-γS only partially stabilizes the nucleocapsid, and a DNA is released in “quantized” steps. We interpret the ensemble of data to indicate that (i) the viral procapsid possesses a degree of plasticity that is required to accommodate the packaging of large DNA substrates; (ii) the gpD decoration protein is required to stabilize the fully expanded capsid; and (iii) nucleotides regulate high-affinity DNA binding interactions that are required to maintain DNA in the packaged state.

Statics and dynamics of condensed DNA within phages and globules.

Several controversial issues concerning the packing of linear DNA in bacteriophages and globules are discussed. Exact relations for the osmotic pressure, capsid pressure and loading force are derived in terms of the hole size inside phages under the assumption that the DNA globule has a uniform density. A new electrostatic model is introduced for computing the osmotic pressure of rod-like polyelectrolytes at very high concentrations. At intermediate packing, a reptation model is considered for DNA diffusing within a toroidal globule. Under tight-packing conditions a model of Coulomb sliding friction is proposed. A general discussion is given of our current understanding of the statics and dynamics of confined DNA in the context of the following experiments: characterization of the liquid crystalline phases, X-ray scattering by phages, osmotic-stress measurements, cyclization within globules and single-molecule determination of the loading forces.