Decanoate Research Articles

Irreversible temperature indicator based cellulose membranes conjugated with leuco‐dye pigment

AbstractThis research focuses on the development of thermochromic membranes made of cellulose acetate (CA) for temperature monitoring of sensitive food products. Two dual TC membranes developed for the control of different temperature ranges were formulated using a three‐component system: a leuco‐dye membrane (crystal violet lactone, CVL) integrated with an acidic membrane containing the color developer (salicylic acid) and the acidic solvent with different melting points (decanoic acid, DA, or methacrylic acid, MA). The CVL membrane, together with the DA membrane, showed an irreversible color change when exposed to 35°C, which was facilitated by the melting of DA. The CVL membrane also underwent an irreversible color change when exposed to 15°C together with the MA membrane. The membranes were characterized in detail using scanning electron microscopy. The evaluation of color changes, reproducibility, specificity, and stability ensured the practical suitability of these membranes. Overall, this innovative approach has proven to be a reproducible, sustainable, cost‐effective method to produce irreversible colorimetric temperature sensors. These sensors have significant potential for applications in the food and pharmaceutical industries and offer a promising way to improve product safety and quality.

Volatile compounds of Croatian cheese in a lamb skin sack prepared from a mixture of goat's and cow's milk

Volatile aroma compounds are one of the main parameters in consumer choice and acceptance of cheese. The traditional way of making cheese, still preserved in Croatia, is the anaerobic ripening of curds in a lamb or goat sack. Cheeses produced in such a way have a specific aroma. The objective of this study was to determine the volatile compounds of Croatian cheese in a lamb skin sack prepared from a mixture of goat's and cow's milk and relate them with the aroma of this traditional cheese. The cheese extracts were obtained by headspace solid-phase microextraction (HS-SPME) and ultrasonic solvent extraction (USE) and analysed by gas chromatography-mass spectrometry (GCMS). HS-SPME was performed at different temperatures (40, 50 and 60°C) using 2 fibres, divinylbenzene/carboxen/polydimethylsiloxane (DVB/CAR/PDMS) fibre and carboxen/ polydimethylsiloxane (CAR/PDMS) fibre. Increasing the extraction temperature resulted in higher sorption of fatty acids on both fibres. A total of 28 volatile compounds were identified in the cheese samples including 13 acids, 10 esters, 2 alcohols, 2 hydrocarbons and 1 ketone. Results revealed that fatty acids were the predominant group of volatile compounds in all samples. In samples obtained by HS-SPME, the most abundant were hexanoic, octanoic, butanoic, acetic and decanoic acid while (Z)-octadec-9-enoic, hexadecanoic, decanoic and tetradecanoic acid were the most abundant in the sample obtained by USE.

Preparation and characterization of expanded dickite/decanoic acid phase-change materials

The leakage of phase-change materials presents a significant challenge that impedes their application. Loading porous materials onto phase-change materials is an effective approach to addressing this issue. In this study, porous expanded dickite as a carrier was utilized to load decanoic acid and create a composite phase-change material. The loading content of decanoic acid was varied to obtain different composite phase-change materials. Fourier transform infrared spectroscopy analysis confirmed the formation of hydrogen bonds between the expanded dickite carrier and decanoic acid. Scanning electron microscopy images and energy-dispersive X-ray spectroscopy mapping results demonstrated that decanoic acid was evenly dispersed on the expanded dickite carrier without any agglomeration. The expanded dickite carrier effectively immobilized decanoic acid through hydrogen bonding, thereby preventing leakage, as long as the loading content of decanoic acid did not exceed 60%. The higher thermal conductivity of the expanded dickite carrier promoted the thermal conductivity of the expanded dickite/decanoic acid composite phase-change materials, enhancing the responsiveness of the composite phase-change materials to ambient temperature. The composite phase-change material containing 60 wt% decanoic acid exhibited excellent endothermic/exothermic cycle stability, and after six cycles, its latent heat remained stable.

Influence of supplemental choline on milk yield, fatty acid profile, and weight changes in postpartum ewes and their offspring.

The most intensive nutritional requirements occur during milk production's peak. Ewe milk contains more protein and fat than cow milk. The nutritional factors significantly determine the composition. The liver undergoes high stress during lactation but is relieved by essential nutrients. Choline acts metabolically as a lipotrope. This compound functions in cell structure construction, maintenance, and acetylcholine synthesis. The animal nutrition industry provides choline from various sources, such as synthetic and natural kinds. This study evaluated the influence of two distinct choline sources on dairy ewes' peripartum and postpartum milk production, composition, and offspring growth. Twenty-four Rambouillet ewes, each weighing around 63.7 ± 1.7 kg, aged three with two previous births, spent 30-day pre-partum and post-partum in individual pens (2 × 2 m). They were given different experimental treatments 30 days before and after birth according to a randomized design; no choline (a), 4 g/day rumen-protected choline (RPC) (b), or 4 g/day thiocholine (c). Milk samples for milk composition and long-chain fatty acid (FA) analysis were taken every 30 days during milk collection. Significant differences (p < 0.05) in ewe body weight, lamb birth weight, and 30-day-old lamb body weight were observed at lambing and on day 30 of lactation due to choline treatment. Milk yield was significantly higher (1.57 kg/day) compared to the control (1.02 kg/day) and RPC (1.39 kg/day), due to the herbal choline source. There was no significant difference in the milk's protein, lactose, fat, non-fat solids, and total milk solids content between the treatments. Herbal choline lowers (p < 0.05) the concentrations of caproic, caprylic, capric, lauric, and myristic acids while boosting (p < 0.05) those of oleic and cis-11-eicosenoic acid, the changes influencing long-chain FA levels (p < 0.05). Providing choline from both sources to ewes enhanced milk production and body weight at lambing and on 30-day post-lambing. The herbal choline supplement altered short-chain milk FAs, while representative concentration pathways affected medium-chain ones.

Towards natural care products: Structural and deposition studies of bio-based polymer and surfactant mixtures

Oppositely charged polymer-surfactant systems are expected to interact with formation of coacervate complexes near composition of charge-neutrality. Such behaviour is widely used in formulated products (e.g. household and personal care), where the co-deposition of coacervates and active ingredients on various surfaces is triggered by dilution. A transition towards the use of more sustainable ingredients is currently ongoing as a response to the need of more environmentally conscious choices in production, albeit slowed down by the often more complex and not fully understood bulk and interfacial behaviour of new ingredients. In this work, mixtures of a medium-chain fatty acid (sodium decanoate) and two grades of bio-based cationic modified inulin were studied. The phase behaviour was determined in a wide composition matrix. The formation of coacervate complexes was observed for the mixture with the higher charge density polymer at a surfactant concentration of 1–3 wt%, close to the surfactant critical micellar concentration in pure water. Such behaviour was confirmed by DLS and SAXS data, suggesting surfactant-polymer complexation in a concentrated phase of packed micelles with a micelle-to-micelle distance of ∼4.5 nm. In situ ellipsometry and neutron reflectometry experiments were conducted to study the effect on surface deposition when diluting. The ellipsometry showed an adsorbed mass of ∼1.3–1.9 mg/m2, consistent with the deposition of a coacervate layer, and considerably higher than the neat, adsorbed polymer layer of ∼0.3 mg/m2. In the case of the neutron reflectometry experiments, dilution was performed before contact with the surface (pre-mixing), and no adsorption of coacervates was observed, but rather the adsorption of a polymer layer (0.49–0.85 mg/m2). The different results obtained with the different techniques highlight the kinetic nature of bulk coacervate formation and deposition, and the competition between these two phenomena. Maximal deposition can be achieved if one can control this time window either by tuning the composition of the system or the experimental set-up, to mimic the conditions of a specific application.

Synthesis and preclinical evaluation of 68Ga-labeled PSMA tracers with improved pharmacological properties

Prostate cancer (PCa) is one of the most common tumors in men, with the overexpression of prostate-specific membrane. In this study, we developed four new 68Ga-labeled PSMA-targeting tracers by introducing quinoline, phenylalanine and decanoic acid groups to enhance their lipophilicity, strategically limiting their metabolic pathway through the urinary system. Four radiotracers were synthesized with radiochemical purity >95 %, and exhibited high stability in vivo and in vitro. The inhibition constants (Ki) of SDTWS01-04 to PSMA were in the nanomolar range (<10 nM). Micro PET/CT imaging and biodistribution analysis revealed that 68Ga-SDTWS01 enabled clear tumor visualization in PET images at 1.5 h post-injection, with excellent pharmacokinetic properties. Notably, the kidney uptake of 68Ga-SDTWS01 significantly reduced, with higher tumor-to-kidney ratio (0.36 ± 0.02), tumor-to-muscle ratio (24.31 ± 2.10), compared with 68Ga-PSMA-11 (T/K: 0.15 ± 0.01; T/M: 14.97 ± 1.40), suggesting that 68Ga-SDTWS01 is a promising radiotracer for the diagnosis of PCa. Moreover, SDTWS01 with a chelator DOTA could also label 177Lu and 225Ac, which could be used for the treatment of PCa.

Insights into Effects of Combined Capric and Lauric Acid on Rumen Bacterial Composition.

This study used next-generation sequencing to assess the impact of combined capric acid (C10) and lauric acid (C12) on the ruminal bacterial composition. Eight Holstein cows were randomly assigned to two groups using a cross-over design. The cows were fed two silage-based diets with the addition of either 100 g of stearic acid per cow per day (control), or 50 g of capric acid and 50 g of lauric acid per cow per day (C10 + C12). On day 18, 250 mL of rumen fluid was collected from each cow, and DNA was isolated, amplified, and sequenced. Treatment did not alter bacterial diversity indices, the relative abundance of archaea, nor the fiber-degrading microorganisms, except for a decrease in Fibrobacter (from 2.9% to 0.7%; p = 0.04). The relative abundance of Prevotellaceae decreased (from 39.9% to 29.6%; p = 0.009), which is notable because some members help to efficiently utilize ammonia by releasing it slowly into the rumen. Furthermore, the relative abundance of Clostridia increased (from 28.4% to 41.5%; p = 0.008), which may have aided the increased ammonia-nitrogen levels in the rumen, as this class contains hyperammonia-producing members. Our study reveals alterations in bacterial abundances with implications for rumen ammonia levels, offering insights into potential strategies for modulating rumen fermentation processes and methane production in ruminant livestock.

Removal of cresol contaminants from aqueous media using hydrophobic deep eutectic solvents

Cresols have distinct effects on the environment and human health. For example, o-cresol is considered a toxic isomer and can cause serious health problems. Cresol isomers generally have a negative impact on the environment as they can be hazardous to aquatic life and can accumulate in the food chain. The introduction of these chemicals has the potential to disrupt the balance of ecological systems by reducing oxygen concentrations in aqueous environments, thus affecting the viability and reproductive capacity of aquatic organisms. This work involves the use of six hydrophobic deep eutectic solvents (HDESs) for the extraction of m-cresol and o-cresol from wastewater. The HDESs include menthol:thymol, menthol:decanoic acid, thymol:decanoic acid, hydrocinnamic acid:decanoic acid, thymol:coumarin and thymol:camphor. All HDESs were prepared in a molar ratio of 1:1. The effects of various parameters such as contact time, mass ratio of HDESs to water, molar ratio of HDESs and initial concentration were investigated. The experimental results indicate excellent efficiency in the removal of cresols from wastewater using all HDESs. The extraction efficiency of > 94 % was achieved for the removal of cresol isomers from wastewater using all prepared HDESs. In addition, COSMO-RS was used to understand the extraction process.

Engineering the Integration of Titanium and Nickel into Zinc Oxide Nanocomposites through Nanolayered Structures and Nanohybrids to Design Effective Photocatalysts for Purifying Water from Industrial Pollutants

Water pollution is one of the main challenges currently facing scientists around the world because of the rapid growth in industrial activities. On this basis, 2D nanolayered and nanohybrid structures, which are based on a ternary system of nickel–titanium–zinc, are considered favorable sources for designing effective nanocomposites for the photocatalytic degradation of industrial pollutants in a short period of time. These nanocomposites were designed by modifying two-dimensional nanolayers to produce a three-dimensional porous structure of multi-doped Ni/Ti-ZnO nanocomposites. Additionally, another additive was produced by constructing nanohybrids of nickel–titanium–zinc combined with a series of hydrocarbons (n-capric acid, myristic acid, stearic acid, suberic acid, and sebacic acid). Energy-dispersive X-ray spectrometry, X-ray diffraction, scanning electron microscopy, infrared spectroscopy, and thermal analyses confirmed the growth of the nanolayered and nanohybrid materials in addition to the production of nanocomposites. The positive role of the dopants (nickel and titanium) in producing an effective photocatalyst was observed through a significant narrowing of the band gap of zinc oxide to 3.05–3.10 eV. Additionally, the high photocatalytic activity of this nanocomposite enabled the complete removal of colored dye from water after 25 min of UV radiation. In conclusion, this study proposes an unconventional approach for designing new optical nanocomposites for purifying water. Additionally, it suggests a novel supporting method for designing new kinds of nanohybrids based on multi-metals and organic acids.

Performance enhancing of saturated fatty acids with various carbon chain lengths on the structures and properties of zein films in alkaline solvents

Zein, a storage protein rich in hydrophobic amino acids found in maize endosperm, offers significant potential for applications in food packaging. Previous studies on zein films primarily focused on the dissolution of zein in organic solvents. In this study, zein was dissolved in an alkaline solution instead of organic solvents. The effects of fatty acids with varying carbon chain lengths, namely decanoic acid, lauric acid, and palmitic acid, on the structure and properties of zein films were investigated. Alkali-solubilized zein exhibited a various degree of deamidation related to fatty acids after film formation in which decanoic acid significantly reduced the deamidation of zein, while palmitic acid had the opposite effect. Various characterizations confirmed that fatty acids were evenly distributed within the film matrix, disrupting the intermolecular interactions of zein and preventing zein molecules from aggregation; this eventually led to a tightly structured film. The addition of fatty acids, specifically decanoic acid and lauric acid, significantly enhanced the performance of the zein films. After loading decanoic acid or lauric acid, the almost opaque zein films had a visible light transmittance of over 50% while maintaining an excellent UV light blocking property. The tensile strength and elongation at break of the films were improved, and their water vapor permeability was reduced by an order of magnitude. This study provides insights into zein plasticization and paves the way for developing organic solvent-free food packaging.

Sustainable one-pot solvent-free enzymatic synthesis of capric acid-rich structured lipids to enhance the nutritional value of grape seed oil

Grape seed oil (GSO) is a valuable resource for the pharmaceutical, cosmetic, and food industries due to its fatty acid composition, which provides anti-inflammatory, cardioprotective, antimicrobial, and anticancer properties. GSO is also recognized for its sensory attributes and serves as an essential component in our dietary intake, providing vital fatty acids for metabolic reactions. The enzymatic synthesis of structured lipids (SL) using GSO was investigated in this study. The SL was created by incorporating medium chain fatty acids (capric acid – C10) at the sn-1 and sn-3 positions and long chain fatty acids in the internal position of the triacylglycerols (TAG). GSO was selected based on its composition rich in unsaturated fatty acids, mainly linoleic acid. The acidolysis reactions were catalyzed by an immobilized commercial lipase Lipozyme TLIM®. The incorporation degree of C10 into GSO reached 36%. Health lipid indices were calculated to determine the C10 incorporation effect on the improvement of nutritional quality of oil. The SL showed lower oxidative stability index (OSI) values than the original oil and higher degree of fatty acid (DFA) values. The simpler, solvent-free method not only enhances the health benefits of oils but also gives valuable properties to GSO, making it an even more attractive option for food industries.

Case for supporting astrocyte energetics in glucose transporter 1 deficiency syndrome.

In glucose transporter 1 deficiency syndrome (Glut1DS), glucose transport into brain is reduced due to impaired Glut1 function in endothelial cells at the blood-brain barrier. This can lead to shortages of glucose in brain and is thought to contribute to seizures. Ketogenic diets are the first-line treatment and, among many beneficial effects, provide auxiliary fuel in the form of ketone bodies that are largely metabolized by neurons. However, Glut1 is also the main glucose transporter in astrocytes. Here, we review data indicating that glucose shortage may also impact astrocytes in addition to neurons and discuss the expected negative biochemical consequences of compromised astrocytic glucose transport for neurons. Based on these effects, auxiliary fuels are needed for both cell types and adding medium chain triglycerides (MCTs) to ketogenic diets is a biochemically superior treatment for Glut1DS compared to classical ketogenic diets. MCTs provide medium chain fatty acids (MCFAs), which are largely metabolized by astrocytes and not neurons. MCFAs supply energy and contribute carbons for glutamine and γ-aminobutyric acid synthesis, and decanoic acid can also block α-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid glutamate receptors. MCTs do not compete with metabolism of ketone bodies mostly occurring in neurons. Triheptanoin, an anaplerotic but also gluconeogenic uneven MCT, may be another potential addition to ketogenic diets, although maintenance of "ketosis" can be difficult. Gene therapy has also targeted both endothelial cells and astrocytes. Other approaches to increase fuel delivery to the brain currently investigated include exchange of Glut1DS erythrocytes with healthy cells, infusion of lactate, and pharmacological improvement of glucose transport. In conclusion, although it remains difficult to assess impaired astrocytic energy metabolism invivo, astrocytic energy needs are most likely not met by ketogenic diets in Glut1DS. Thus, we propose prospective studies including monitoring of blood MCFA levels to find optimal doses for add-on MCT to ketogenic diets and assessing of short- and long-term outcomes.

Performance and Phase Change Kinetic Investigations on Capric-Myristic Acid Eutectic Mixtures for Energy-Saving Construction

In the present study, capric acid and myrisic acid were first selected to prepare a capric acid-myrisic acid eutectic mixture using a compounding method. Then, the thermal properties, structural stability and weight loss of capric acid-myrisic acid eutectic mixtures were analyzed using differential scanning calorimetry, Fourier transform infrared and thermogravimetry. Finally, the activation energy and reaction order of the capric acid-myrisic acid eutectic mixture during solid-liquid transformation were calculated using the phase change kinetic methods of Kissinger and Ozawa. The results indicate that capric acid-myrisic acid eutectic mixtures have good thermal cycle stability and stable energy storage in practical applications. The activation energies of capric acid-myrisic acid eutectic mixtures were calculated using the phase change kinetic methods of Kissinger and Ozawa, with values of 345.6 KJ/mol and 333.3 KJ/mol, respectively, indicating that both phase change kinetic methods have good accuracy.

Description of Ewiss cheese, a new ewe milk cheese processed by Swiss cheese manufacturing techniques: Microbiological, physicochemical, and sensory aspects

Typically, Swiss-type cheese is made from cow milk. However, in the present work an attempt to expand the sheep supply chain and product offering in this field was made by developing a new type of cheese using Swiss-type cheese technology. The cheese was manufactured under industrial conditions, and fermentations were carried out using freeze-dried commercial starters that are traditionally used in the production of Swiss cheese. Two experimental "Ewiss cheese" (EC) products were produced using raw milk (RM) and pasteurized milk (PM), respectively. Fourteen microbial groups were investigated by plate counts from curd until ripened cheeses. According to microbiological analyses, no statistically significant differences were found between the 2 productions with respect to the group of lactic acid bacteria (LAB). The curds were mainly characterized by mesophilic LAB cocci (7.45 log10 cfu/g in RM-EC and 7.33 log10 cfu/g in PM-EC). However, at the end of the ripening period (9 mo), the cheeses exhibited a higher presence of mesophilic LAB rods. Undesired microbiological groups were found only in the curd of raw milk cheese in the range of 104 to 105 cfu/g, but they were reaching undetectable levels by plate count in the cheese at the end of ripening. The RM-EC and PM-EC were characterized by 76% and 68% of DM, respectively. These cheeses contained 29.30% and 34.36% of protein, and 51.31% and 50.38% of fat, respectively. Textural analysis showed differences in terms of hardness, chewiness, and gumminess between the experimental cheeses and Swiss cheese sold on the market. These differences could be attributed to the higher protein content of ewe milk. The main fatty acids in the cheeses were palmitic acid, myristic acid, oleic acid, and capric acid. Among the organic acids, RM-EC had higher concentrations of lactic acid, whereas PM-EC was higher in propionic acid. The ewe cheeses emitted 46 volatile compounds, including acids, aldehydes, ketones, esters, alcohols, and other compounds. The PM-EC was characterized by the main compounds of Swiss-type cheese: acetic acid, butyric acid, ethyl butyrate, ethyl caproate, propanoic acid, and tetramethylpyrazine. Sensory evaluation showed that the new dairy products were generally appreciated, and PM-EC was the most preferred by the judges. This research has enabled the development of new ewe milk products, which could stimulate the valorization of a sector that has been long neglected and still has a large margin of improvement.

Feasibility of Different Methods for Separating n-Hexane and Ethanol

Conventional distillation methods cannot effectively separate the components of an azeotropic mixture since both phases have the same composition, thereby preventing further separation. Additional techniques such as pressure swing distillation or distillation with entrainers are often employed to overcome this limitation and achieve separation. The aim of this investigation was to select the most effective method for separating n-hexane and ethanol. The feasibility of three methods was analyzed: reduced pressure distillation, extractive distillation, and liquid–liquid extraction. The mutual solubility of n-hexane and prepared deep eutectic solvents (DESs) (nine hydrophilic: choline chloride with glycerol, ethylene glycol, or carboxylic acid (malic, citric, glycolic); tetramethylammonium chloride with glycolic acid; lactic acid with glycerol; K2CO3 with glycerol or ethylene glycol; two hydrophobic: menthol with decanoic or dodecanoic acid) was experimentally determined. Extraction experiments were conducted to test the solubility of DESs in the feed mixture. The effect of changing DES-to-feed mass ratio was further investigated with choline chloride–glycerol (1:2). The same DES and both hydrophobic DESs were able to increase the relative volatility and enhance the separation of ethanol and n-hexane. Based on the obtained results, extraction was selected as the most effective method for the separation of n-hexane and ethanol.

Exploring the potential of fly ash cenosphere—capric acid composite phase change material in concrete incorporating supplementary cementitious material

AbstractIncreasing demand for energy globally, with the building sector being a significant contributor to energy consumption, is a major issue. To address this, efforts are being made to make buildings more energy efficient, including lowering the demand for heating, ventilation, and air conditioning to decrease energy demand. Phase change material (PCM) functions as a latent heat energy storage material that absorbs heat energy while transforming its phase from solid to liquid and then releases the heat energy when it transforms from liquid to solid state. Integrating PCM into building materials can considerably enhance their energy storage density. In this study, the potential of using fly ash cenosphere—capric acid (CeCA) composite PCM in concrete is evaluated. The mechanical, durability and thermal properties of the CeCA blended concrete were investigated. Furthermore, the CeCA‐concrete is enhanced with auxiliary cementitious substance, namely ground granulated blast furnace slag (GGBS). The optimal proportion of CeCA was determined to ensure a balance of compressive strength and thermal conductivity. The results indicated that the compressive strength of the CeCA blended concrete lowered with an increase in the percentage of CeCA. The thermal conductivity of the concrete specimen was lowered by 33.14% at a 25% incorporation of CeCA, resulting in improved thermal performance. The incorporation of GGBS has enhanced the mechanical and durability performance of CeCA‐Concrete. The optimal concrete specimen was found to be 25% CeCA +40% GGBS, which had greater thermal efficiency than the control specimen with similar strength performance. The findings were validated by field emission scanning electron microscopy analysis of the concrete specimen.

Extraction of ofloxacin from water using hydrophobic eutectic solvents

Wastewater treatment plants do not cope well with emerging micropollutants, such as pharmaceuticals, because they are not effective to remove them. Therefore, this work aims to develop a process for the extraction of ofloxacin (OFX) based on a liquid-liquid extraction using hydrophobic eutectic solvents (HES), coupled with the Conductor-like Screening Model for Real Solvent (COSMO-RS) for solvent screening. First, COSMO-RS was used to predict the partition coefficient of OFX for four HES families: L-menthol: fatty acid, L-menthol: fatty alcohol, fatty acid: fatty acid and fatty acid: fatty alcohols, at three different molar ratios (2:1, 1:1, and 1:2). These results showed that HES formed by fatty acids, especially those with a longer alkyl chain and a higher fatty acid molar ratio, were the most suitable solvents for OFX extraction. Then, the most promising HES to extract OFX was evaluated experimentally. The HES decanoic acid: dodecanoic acid (C10 acid: C12 acid) in a molar ratio of 2:1 being the system with best extraction results of OFX was selected to optimize the extraction conditions of OFX, namely pH, HES: water ratio (v/v), and OFX concentration, using a response surface methodology (RSM). The results obtained showed that at a pH of 5.2, HES-water ratio (v/v) of 1.3, and 2.5 mg/ml of OFX that an extraction efficiency of OFX of (98.8 ± 0.9)% could be achieved. The results show that one-step OFX extraction is possible, but is significantly influenced by both the extraction parameters and the hydrophobic properties of the HES.

Evaluation of the protective effect of capric acid on behavioral and biochemical alterations in valproic acid-induced model of autism

Aim and objectiveThe purpose of the study is to determine the neuroprotective effect of capric acid on sodium valproate-induced model of autism. MethodsIn this study, the effect of CA was observed in animals with single dose of valproic acid (600 mg/kg, i. p.) where the disease condition was confirmed by developmental impairment in pups. Behavioral tests that assess anxiety, depression, stereotypical and repetitive behavior, social interaction, learning and memory, and other confounding variables were performed. Subsequently, oxidative stress parameters, pro-inflammatory cytokine levels and mitochondrial complex activities in the selected brain regions were analyzed. ResultsValproic acid successfully produced autism-like symptoms from post-natal day 7 and also demonstrated impairment in social behavior, learning and memory, and anxiety and depression. Valproic acid was found to produce oxidative stress and neuro-inflammation in the hippocampus, prefrontal cortex, and cerebellum. Treatment with capric acid produced a positive effect on the alterations with maximum effects evident at 400 mg/kg, p. o. through amelioration of behavioral as well as biochemical changes. ConclusionThe current study concluded that capric acid could act as a likely candidate for the treatment and management of autism via significant modulation of neurobehavioral parameters, oxidative stress, mitochondrial dysfunction and inflammatory markers.

Antifungal activity of Carica papaya fruit extract against Microsporum canis: in vitro and in vivo study.

Tinea capitis (T. capitis), commonly known as scalp ringworm, is a fungal infection affecting the scalp and hair. Among the causative agents, Microsporum canis (M. canis) stands out, often transmitted from cats to humans (zoonotic disease). In this study, we investigated the efficacy of Carica papaya (C. papaya), fruit extract against dermatophytes, particularly M. canis, both in vitro and in vivo. Additionally, we aimed to identify the active compounds responsible for suppressing fungal growth and assess the toxicity of C. papaya on human cells. It conducted in two parts. First, In Vitro Study include the preparation of C. papaya fruit extract using methanol as the solvent, Phytochemical analysis of the plant extract including Gas chromatography-mass spectrometry (GC-MS) and Fourier-transform infrared spectroscopy (FTIR) was conducted, Cytotoxicity assays were performed using HUH-7 cells, employing the MTT assay (1-(3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide), Antimicrobial activity against M. canis was evaluated, including: Zone of inhibition (ZI), Minimum inhibitory concentration (MIC), Minimum fungicidal concentration (MFC), M. canis cell alterations were observed using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Second, In Vivo, Albino Wistar male rats were included. The phytochemical analysis of the methanolic extract from papaya revealed several functional groups, including hydroxyl, ammonia, alkane, carbonate, and alcohol. Additionally, the GC-MS analysis identified 15 compounds, with xanthosine and decanoic acid being the predominant components. The methanolic extract of papaya fruits demonstrated potent antifungal activity: ZI = 37 mm, MIC = 1,000 μg/mL, MFC = 1900 μg/mL, MTT results indicated lower cytotoxicity of the fruit extract at concentrations of 20 μg/mL, 50 μg/mL, 100 μg/mL, 150 μg/mL, and 200 μg/mL, The IC50 revealed a significant decrease in cell viability with increasing extract concentration. Notably, papaya extract induced considerable alterations in the morphology of M. canis hyphae and spores. In animal tissue, improvements were observed among the group of rats which treated with Papaya extract. This study highlights the potential of C. papaya fruits as a natural antifungal agent, warranting further exploration for clinical applications.

Engineering the Spatial Distribution of Amphiphilic Molecule within Complex Coacervate Microdroplet via Modulating Charge Strength of Polyelectrolytes.

The investigation of the interplay between complex coacervate microdroplets and amphiphilic molecules offers valuable insights into the processes of prebiotic compartmentalization on the early Earth and presents a promising avenue for future advancements in biotechnology. Herein, the interaction between complex coacervate microdroplets and amphiphilic molecule (decanoic acid) is systematically investigated by varying charge strengths of negatively charged polyelectrolytes (DNA and PAA) and positively charged polyelectrolytes (PDDA and DEAE-Dextran). It is found that the interaction between amphiphilic molecule and complex coacervate microdroplets depended on the delicate balance between the interaction between decanoic acid and polyelectrolyte and the interaction between two polyelectrolytes. The different spatial distribution of amphiphilic molecule can result in differences in the internal microenvironment, which can further alter the uptake or exclusion of small molecules and biomolecules with different charges and polarities and functional biological process.