Capillary-like Network Formation Research Articles

Simulation of Soluble and Bound VEGF-stimulated in vitro Capillary-like Network Formation on Deformed Substrate.

Capillary plexus cultivation is crucial in tissue engineering and regenerative medicine. Theoretical simulations have been conducted to supplement the expensive experimental works. However, the mechanisms connecting mechanical and chemical stimuli remained undefined, and the functions of the different VEGF forms in the culture environment were still unclear. In this paper, we developed a hybrid model for simulating short-term in vitro capillary incubations. We used the Cellular Potts model to predict individual cell migration, morphology change, and continuum mechanics to quantify biogel deformation and VEGF transport dynamics. By bridging the mechanical regulation and chemical stimulation in the model, the results showed good agreement between the predicted network topology and experiments, in which elongated cells connected, forming the network cords and round cells gathered, creating cobblestone-like aggregates. The results revealed that the capillary-like networks could develop in high integrity only when the mechanical and chemical couplings worked adequately, with the cell morphology and haptotaxis driven by the soluble and bound forms of VEGF, respectively, functioning simultaneously.

3D cell culture scaffold supports capillary-like network formation by endothelial cells derived from porcine induced pluripotent stem cells.

Endothelial cells (EC) can be generated from porcine induced pluripotent stem cells (piPSC), but poor efficiency in driving EC differentiation hampers their application and efficacy. Additionally, the culture of piPSC-derived EC (piPSC-EC) on 3D scaffolds has not been fully reported yet. Here, we report a method to improve the generation of EC differentiation from piPSC and to facilitate their culture on 3D scaffolds, providing a potential resource for in vitro drug testing and the generation of tissue-engineered vascular grafts (TEVG). We initiated the differentiation of piPSC into EC by seeding them on laminin 411 and employing a three-stage protocol, which involved the use of distinct EC differentiation media supplemented with CHIR99021, BMP4, VEGF, and bFGF. piPSC-EC not only expressed EC markers such as CD31, VE-cadherin, and vWF but also exhibited an upregulation of EC marker genes, including CD31, CD34, VEGFR2, VE-cadherin, and vWF. They exhibited functional characteristics similar to those of porcine coronary artery endothelial cells (PCAECs), such as tube formation and Dil-Ac-LDL uptake. Furthermore, when cultured on 3D scaffolds, piPSC-EC developed a 3D morphology and were capable of forming an endothelial layer and engineering capillary-like networks, though these lacked lumen structures. Our study not only advances the generation of EC from piPSC through an inhibitor and growth factor cocktail but also provides a promising approach for constructing vascular network-like structures. Importantly, these findings open new avenues for drug discovery in vitro and tissue engineering in vivo.

Biomimetic management of bone healing stages: MOFs induce tunable degradability and enhanced angiogenesis-osteogenesis coupling

Currently, biodegradable biomaterials are extensively used in bone regeneration. Nevertheless, a significant challenge remains in accurately adjusting their degradation rates to match bone healing stages to achieve bone regeneration. Herein, we present a novel biodegradable bone grafts integrated with zeolite imidazole framework-8 (ZIF-8) nanocrystals, fabricated via microinjection molding. Apart from the reinforcing effect derived from the in situ fibrillation of PCL in PLGA, nanoscale ZIF-8 is inspiringly demonstrated to control the PLGA degradation. Both molecular dynamic simulation and experimental results indicate that Zn2+ derived from ZIF-8 nanocrystals acts as a Lewis acid to participate the degradation of PLGA matrix, thus successfully reconciles the contradiction between degradation of matrix and maintenance of reinforcing phase. Moreover, nanometric ZIF-8 modified bone grafts improve the angiogenesis-osteogenesis coupling. In vitro, it directly boosts HIF-1α and capillary-like network formation of endothelial cells (ECs), and RUNX2 and OCN expression in bone marrow mesenchymal stem cells (BMSCs). In vivo, bone grafts with a moderate concentration (0.5 %) of ZIF-8 nanoparticles aid vascularized bone regeneration by tunable biodegradation matching bone healing stages. Further, RNA sequencing shows PLGA/PCL@nZ bone grafts promote angiogenesis-osteogenesis by cooperatively regulating calcium signaling pathway in both ECs and BMSCs. Collectively, this study delineates a groundbreaking bone repair strategy with profound clinical application potential.

An in vitro autologous, vascularized, and immunocompetent Tissue Engineered Skin model obtained by the self-assembled approach.

A complete in vitro skin model, containing resident cell types is needed to understand physiology and to consider the role of immune and endothelial cells in dermal drug testing. In this study, a cell extraction technique was developed to isolate resident skin cells from the same human donor while preserving the immune and endothelial cells. Then those cells were used to reconstruct an autologous, vascularized, and immunocompetent Tissue-Engineered Skin model, aviTES. Phenotypic characterization of the viable cells was performed on freshly isolated cells and after thawing through flow cytometry. Dermal cell extracts were characterized as fibroblasts, endothelial and immune cells, and the average amount of each cell type represents 4, 0.5, and 1 million viable cells per g of the dermis, respectively. The 3D models, TES and aviTES, were characterized by a fully differentiated epidermis that showed an increase in the presence of Ki67+ cells in the basolateral layer of the aviTES model. Capillary-like network formation, through the self-assembly of endothelial cells, and the presence of functional immune cells were identified through immunofluorescence staining in aviTES. In addition, the aviTES model was immunocompetent, as evidenced by its capacity to increase the production of pro-inflammatory cytokines TNF-α, MIP-1α, and GM-CSF following LPS stimulation. This study describes an autologous skin model containing a functional resident skin immune system and a capillary network. It provides a relevant tool to study the contribution of the immune system to skin diseases and inflammatory responses and to investigate resident skin cell interactions and drug development. STATEMENT OF SIGNIFICANCE: : There is an urgent need for a complete in vitro skin model containing the resident cell types to better understand the role of immune and endothelial cells in skin and to be able to use it for drug testing. Actual 3D models of human skin most often contain only fibroblasts and keratinocytes with a limited number of models containing endothelial cells or a limited variety of immune cells. This study describes an autologous skin model containing a functional resident skin immune system and a capillary network. It provides a relevant tool to study the contribution of the immune system to skin diseases and inflammatory responses and to investigate interactions between resident skin cell, improving our capacity to develop new drugs.

Development and Optimisation of Hydrogel Scaffolds for Microvascular Network Formation.

Traumatic injuries are a major cause of morbidity and mortality worldwide; however, there is limited research on microvascular traumatic injuries. To address this gap, this research aims to develop and optimise an in vitro construct for traumatic injury research at the microvascular level. Tissue engineering constructs were created using a range of polymers (collagen, fibrin, and gelatine), solvents (PBS, serum-free endothelial media, and MES/NaCl buffer), and concentrations (1-5% w/v). Constructs created from these hydrogels and HUVECs were evaluated to identify the optimal composition in terms of cell proliferation, adhesion, migration rate, viability, hydrogel consistency and shape retention, and tube formation. Gelatine hydrogels were associated with a lower cell adhesion, whereas fibrin and collagen ones displayed similar or better results than the control, and collagen hydrogels exhibited poor shape retention; fibrin scaffolds, particularly at high concentrations, displayed good hydrogel consistency. Based on the multipronged evaluation, fibrin hydrogels in serum-free media at 3 and 5% w/v were selected for further experimental work and enabled the formation of interconnected capillary-like networks. The networks formed in both hydrogels displayed a similar architecture in terms of the number of segments (10.3 ± 3.21 vs. 9.6 ± 3.51) and diameter (8.6446 ± 3.0792 μm vs. 7.8599 ± 2.3794 μm).

Effects of collagen, chitosan and mixture on fibroblast responses and angiogenic activities in 2D and 3D in vitro models.

Despite accumulating evidences have demonstrated the potential of collagen and chitosan on tissue repair, it remains unclear on their combination effects. Here, we examined the regenerative effects of single collagen, chitosan and their mixture on fibroblasts and endothelial cells at cellular levels. The results showed that fibroblast responses, as indicated by high proliferative rate, increased spheroid diameter and migrated area existing from spheroid edge, and decreased wound area, were significantly promoted by either collagen or chitosan stimulation. Similarly, both collagen and chitosan resulted in increased endothelial cell proliferation and migration with accelerated tube-like network formation and upregulated VE-cadherin expression, although collagen strongly provided this effect. While the 1:1 mixture (100:100 μg/mL of chitosan to collagen) treatment caused a reduction in fibroblast viability, the lower ratio of chitosan (1:10 mixture; 10:100 μg/mL) did not produce any impact on both fibroblast and endothelial cell viabilities. The 1:10 mixture also significantly enhanced the additional effects on fibroblast responses and angiogenic activities as shown by higher endothelial growth, proliferation and migration with accelerated capillary-like network formation than those treated with the single substance. Further investigation of signaling proteins found that collagen significantly increased expressions of p-Fak, p-Akt and Cdk5 whereas chitosan upregulated p-Fak and Cdk5 expressions. Comparing to the single treatments, p-Fak, p-Akt and Cdk5 were higher expressed in the 1:10 mixture. These observations indicate that proper collagen-chitosan mixture provides the combination effects on fibroblast responses and angiogenic activities when a high concentration of collagen is used, possibly through Fak/Akt and Cdk5 signaling pathways. Therefore, this study helps to define the clinical use of collagen and chitosan as promising biomaterials for tissue repair.

Gelatin methacryloyl hydrogel as an injectable scaffold with multi-therapeutic effects to promote antimicrobial disinfection and angiogenesis for regenerative endodontics.

Regenerative endodontics represents a paradigm shift in dental pulp therapy for necrotic young permanent teeth. However, there are still challenges associated with attaining maximum root canal disinfection while supporting angiogenesis and preserving resident stem cells viability and differentiation capacity. Here, we developed a hydrogel system by incorporating antibiotic-eluting fiber-based microparticles in gelatin methacryloyl (GelMA) hydrogel to gather antimicrobial and angiogenic properties while prompting minimum cell toxicity. Minocycline (MINO) or clindamycin (CLIN) was introduced into a polymer solution and electrospun into fibers, which were further cryomilled to attain MINO- or CLIN-eluting fibrous microparticles. To obtain hydrogels with multi-therapeutic effects, MINO- or CLIN-eluting microparticles were suspended in GelMA at distinct concentrations. The engineered hydrogels demonstrated antibiotic-dependent swelling and degradability while inhibiting bacterial growth with minimum toxicity in dental-derived stem cells. Notably, compared to MINO, CLIN hydrogels enhanced the formation of capillary-like networks of endothelial cells in vitro and the presence of widespread vascularization with functioning blood vessels in vivo. Our data shed new light onto the clinical potential of antibiotic-eluting gelatin methacryloyl hydrogel as an injectable scaffold with multi-therapeutic effects to promote antimicrobial disinfection and angiogenesis for regenerative endodontics.

Circ_0006220 Contributes to NSCLC Progression through miR-342-3p/GOT2 Axis.

Dysregulated circular RNAs (circRNAs) have shown crucial modulatory functions in tumorigenesis, containing non-small cell lung cancer (NSCLC). The purpose of this study was to explore the biological functions and regulatory theory of circ_0006220 in NSCLC. Reverse transcription-quantitative polymerase chain reaction and Western blot assay were conducted to measure RNA and protein expression, respectively. A total of 73 cases of NSCLC tumor samples were collected for expression analysis, and A-549 and NCI-H1299 cell lines were used for functional experiments. Cell proliferation was assessed by cell counting kit-8 assay, colony formation assay, 5-ethynyl-2'-deoxyuridine assay, and flow cytometry. Cell apoptosis, motility, and angiogenesis ability were analyzed by flow cytometry, transwell assays, and capillary-like network formation assay. Dual-luciferase reporter assay and RNA immunoprecipitation assay were conducted to verify the target relationships. Circ_0006220 was highly expressed in NSCLC tissues and cell lines. Circ_0006220 silencing inhibited the proliferation, migration, invasion, and angiogenesis but induced the apoptosis of NSCLC cells. Circ_0006220 acted as a microRNA-342-3p (miR-342-3p) sponge, and circ_0006220 knockdown-induced changes on the phenotypes of NSCLC cells were largely overturned by the knockdown of miR-342-3p. miR-342-3p interacted with the 3' untranslated region of glutamic-oxaloacetic transaminase 2 (GOT2), and GOT2 overexpression largely diminished miR-342-3p overexpression-mediated influences in NSCLC cells. Circ_0006220 could up-regulate GOT2 expression by sponging miR-342-3p. Circ_0006220 promoted the malignant behaviors of NSCLC cells through mediating the miR-342-3p/GOT2 regulation cascade.

Pre-selection of fibroblast subsets prompts prevascularization of tissue engineered skin analogues.

The papillary and reticular dermis harbors phenotypically distinct fibroblasts, whose functions such as maintenance of skin's microvasculature are also distinct. Thus, we hypothesized that pre-selection of the subpopulations of fibroblasts would benefit the generation of skin tissue engineered (TE) constructs, promoting their prevascularization in vitro. We first isolated papillary and reticular fibroblasts using fluorescence-activated cell sorting and studied the effect of their secretome and extracellular matrix (ECM) on human dermal microvascular endothelial cell (hDMEC) organization. Subsequently, we developed a bilayered 3D polymeric structure with distinct layer-associated features to house the subpopulations of fibroblasts, to generate a skin analogue. Both papillary and reticular fibroblasts were able to stimulate capillary-like network formation in a Matrigel assay. However, the secretome of the two subpopulations was substantially different, being enriched in VEGF, IGF-1, and Angio-1 in the case of papillary fibroblasts and in HGF and FGF-2 for the reticular subset. In addition, the fibroblast subpopulations deposited varied levels of ECM proteins, more collagen I and laminin was produced by the reticular subset, but these differences did not impact hDMEC organization. Vessel-like structures with lumens were observed earlier in the 3D skin analogue prepared with the sorted fibroblasts, although ECM deposition was not affected by the cell's pre-selection. Moreover, a more differentiated epidermal layer was obtained in the skin analogue formed by the sorted fibroblasts, confirming that its whole structure was not affected. Overall, we provide evidence that pre-selection of papillary and reticular fibroblasts is relevant for promoting the in vitro prevascularization of skin TE constructs.

Human Umbilical Vein Endothelial Cells Form a Network on a Hyaluronic Acid/Gelatin Composite Hydrogel Moderately Crosslinked and Degraded by Hydrogen Peroxide.

The study of the capillary-like network formation of human umbilical vein endothelial cells (HUVECs) in vitro is important for understanding the factors that promote or inhibit angiogenesis. Here, we report the behavior of HUVECs on the composite hydrogels containing hyaluronic acid (HA) and gelatin with different degrees of degradation, inducing the different physicochemical properties of the hydrogels. The hydrogels were obtained through horseradish peroxidase (HRP)-catalyzed hydrogelation consuming hydrogen peroxide (H2O2, 16 ppm) supplied from the air, and the degradation degree was tuned by altering the exposure time to the air. The HUVECs on the composite hydrogel with intermediate stiffness (1.2 kPa) obtained through 120 min of the exposure were more elongated than those on the soft (0.4 kPa) and the stiff (2.4 kPa) composite hydrogels obtained through 15 min and 60 min of the exposure, respectively. In addition, HUVECs formed a capillary-like network only on the stiff composite hydrogel although those on the hydrogels with comparable stiffness but containing gelatin alone or alginate instead of HA did not form the network. These results show that the HA/gelatin composite hydrogels obtained through the H2O2-mediated crosslinking and degradation could be a tool for studies using HUVECs to understand the promotion and inhibition of angiogenesis.

Engineering Neutrophil Immunomodulatory Hydrogels Promoted Angiogenesis.

Timely restoration of blood supply following ischemia is critical to rescue damaged tissue. However, clinical efficacy is hampered by the inflammatory response after ischemia. Whether inflammation fine tunes the angiogenesis and the function of blood vessels via the heterogeneity of neutrophils remain poorly understood. Herein, the objective of this work is to incorporate the growth factors secreted by neutrophils into a porous gelatin methacrylate (GelMA) hydrogel, which subsequently is used as a novel regenerative scaffold with defined architecture for ischemia. We demonstrate that anti-inflammatory neutrophils (N2-polarized neutrophils) play an important role in promoting the migration of human umbilical vein endothelial cells (HUVECs) and formation of capillary-like networks in vitro. More importantly, vascular anastomosis can be achieved by modulating the neutrophils to N2 phenotype. In addition, N2-polarized composite hydrogel scaffolds can regulate inflammation, maintain the survival of exogenous cells, and promote angiogenesis in vivo. Notably, the composite hydrogel scaffolds promote neovascularization during exogenous introduction of endothelial cells by anastomosis. Taken together, this study highlights N2-polarized neutrophils composite hydrogels can achieve vascularization rapidly by regulating inflammation and promoting vascular anastomosis. This work lays the foundation for research into the treatment of ischemia and may inspire further research into novel treatment options.

An encapsulated fibrin-based bioartificial tissue construct with integrated macrovessels, microchannels, and capillary tubes.

Facilitating sufficient nutrient and oxygen supply in large-scale bioartificial constructs is a critical step in organ bioengineering. Immediate perfusion not only depends on a dense capillary network, but also requires integrated large-diameter vessels that allow vascular anastomoses during implantation. These requirements set high demands for matrix generation as well as for in vitro cultivation techniques and remain mostly unsolved challenges up until today. Additionally, bioartificial constructs must have sufficient biomechanical stability to withstand mechanical stresses during and after implantation. We developed a bioartificial tissue construct with a fibrin matrix containing human umbilical vein endothelial cells and adipose tissue-derived stem cells facilitating capillary-like network formation. This core matrix was surrounded by a dense acellular fibrin capsule providing biomechanical stability. Two fibrin-based macrovessels were integrated on each side of the construct and interconnected via four 1.2 mm thick microchannels penetrating the cellularized core matrix. After 4 days of perfusion in a custom-built bioreactor, homogeneous capillary-like network formation throughout the core matrix was observed. The fibrin capsule stabilized the core matrix and facilitated the generation of a self-supporting construct. Thus, the encapsulated fibrin tissue construct could provide a universal prevascularized matrix for seeding with different cell types in various tissue engineering approaches.

Crosslinking and functionalization of acellular patches via the self-assembly of copper@tea polyphenol nanoparticles.

Decellularization is a promising technique to produce natural scaffolds for tissue engineering applications. However, non-crosslinked natural scaffolds disfavor application in cardiovascular surgery due to poor biomechanics and rapid degradation. Herein, we proposed a green strategy to crosslink and functionalize acellular scaffolds via the self-assembly of copper@tea polyphenol nanoparticles (Cu@TP NPs), and the resultant nanocomposite acellular scaffolds were named as Cu@TP-dBPs. The crosslinking degree, biomechanics, denaturation temperature and resistance to enzymatic degradation of Cu@TP-dBPs were comparable to those of glutaraldehyde crosslinked decellularized bovine pericardias (Glut-dBPs). Furthermore, Cu@TP-dBPs were biocompatible and had abilities to inhibit bacterial growth and promote the formation of capillary-like networks. Subcutaneous implantation models demonstrated that Cu@TP-dBPs were free of calcification and allowed for host cell infiltration at Day 21. Cardiac patch graft models confirmed that Cu@TP-dBP patches showed improved ingrowth of functional blood vessels and remodeling of extracellular matrix at Day 60. These results suggested that Cu@TP-dBPs not only had comparable biomechanics and biostability to Glut-dBPs, but also had several advantages over Glut-dBPs in terms of anticalcification, remodeling and integration capabilities. Particularly, they were functional patches possessing antibacterial and proangiogenic activities. These material properties and biological functions made Cu@TP-dBPs a promising functional acellular patch for cardiovascular applications.

Porous tantalum-composited gelatin nanoparticles hydrogel integrated with mesenchymal stem cell-derived endothelial cells to construct vascularized tissue in vivo.

The ideal scaffold material of angiogenesis should have mechanical strength and provide appropriate physiological microporous structures to mimic the extracellular matrix environment. In this study, we constructed an integrated three-dimensional scaffold material using porous tantalum (pTa), gelatin nanoparticles (GNPs) hydrogel, and seeded with bone marrow mesenchymal stem cells (BMSCs)-derived endothelial cells (ECs) for vascular tissue engineering. The characteristics and biocompatibility of pTa and GNPs hydrogel were evaluated by mechanical testing, scanning electron microscopy, cell counting kit, and live-cell assay. The BMSCs-derived ECs were identified by flow cytometry and angiogenesis assay. BMSCs-derived ECs were seeded on the pTa-GNPs hydrogel scaffold and implanted subcutaneously in nude mice. Four weeks after the operation, the scaffold material was evaluated by histomorphology. The superior biocompatible ability of pTa-GNPs hydrogel scaffold was observed. Our in vivo results suggested that 28 days after implantation, the formation of the stable capillary-like network in scaffold material could be promoted significantly. The novel, integrated pTa-GNPs hydrogel scaffold is biocompatible with the host, and exhibits biomechanical and angiogenic properties. Moreover, combined with BMSCs-derived ECs, it could construct vascular engineered tissue in vivo. This study may provide a basis for applying pTa in bone regeneration and autologous BMSCs in tissue-engineered vascular grafts.

Hydroxyapatite-Coated Titanium by Micro-Arc Oxidation and Steam-Hydrothermal Treatment Promotes Osseointegration.

Titanium (Ti)-based alloys are widely used in tissue regeneration with advantages of improved biocompatibility, high mechanical strength, corrosion resistance, and cell attachment. To obtain bioactive bone–implant interfaces with enhanced osteogenic capacity, various methods have been developed to modify the surface physicochemical properties of bio-inert Ti and Ti alloys. Nano-structured hydroxyapatite (HA) formed by micro-arc oxidation (MAO) is a synthetic material, which could facilitate osteoconductivity, osteoinductivity, and angiogenesis on the Ti surface. In this paper, we applied MAO and steam–hydrothermal treatment (SHT) to produce HA-coated Ti, hereafter called Ti–M–H. The surface morphology of Ti–M–H1 was observed by scanning electron microscopy (SEM), and the element composition and the roughness of Ti–M–H1 were analyzed by energy-dispersive X-ray analysis, an X-ray diffractometer (XRD), and Bruker stylus profiler, demonstrating the deposition of nano-HA particles on Ti surfaces that were composed of Ca, P, Ti, and O. Then, the role of Ti–M–H in osteogenesis and angiogenesis in vitro was evaluated. The data illustrated that Ti–M–H1 showed a good compatibility with osteoblasts (OBs), which promoted adhesion, spreading, and proliferation. Additionally, the secretion of ALP, Col-1, and extracellular matrix mineralization was increased by OBs treated with Ti–M–H1. Ti–M–H1 could stimulate endothelial cells to secrete vascular endothelial growth factor and promote the formation of capillary-like networks. Next, it was revealed that Ti–M–H1 also suppressed inflammation by activating macrophages, while releasing multiple active factors to mediate osteogenesis and angiogenesis. Finally, in vivo results uncovered that Ti–M–H1 facilitated a higher bone-to-implant interface and was more attractive for the dendrites, which promoted osseointegration. In summary, MAO and SHT-treated Ti–M–H1 not only promotes in vitro osteogenesis and angiogenesis but also induces M2 macrophages to regulate the immune environment, which enhances the crosstalk between osteogenesis and angiogenesis and ultimately accelerates the process of osseointegration in vivo.

3D bioprinting and microscale organization of vascularized tissue constructs using collagen-based bioink.

Bioprinting three-dimensional (3D) tissue equivalents have progressed tremendously over the last decade. 3D bioprinting is currently being employed to develop larger and more physiologic tissues, and it is of particular interest to generate vasculature in biofabricated tissues to aid better perfusion and transport of nutrition. Having an advantage over manual culture systems by bringing together biological scaffold materials and cells in precise 3D spatial orientation, bioprinting could assist in placing endothelial cells in specific spatial locations within a 3D matrix to promote vessel formation at these predefined areas. Hence, in the present study, we investigated the use of bioprinting to generate tissue-level capillary-like networks in biofabricated tissue constructs. First, we developed a bioink using collagen type-1 supplemented with xanthan gum (XG) as a thickening agent. Using a commercial extrusion-based multi-head bioprinter and collagen-XG bioink, the component cells were spatially assembled, wherein the endothelial cells were bioprinted in a lattice pattern and sandwiched between bioprinted fibroblasts layers. 3D bioprinted constructs thus generated were stable, and maintained structural shape and form. Post-print culture of the bioprinted tissues resulted in endothelial sprouting and formation of interconnected capillary-like networks within the lattice pattern and between the fibroblast layers. Bioprinter-assisted spatial placement of endothelial cells resulted in fabrication of patterned prevascularized constructs that enable potential regenerative applications in the future.

Circ_0004104 knockdown alleviates oxidized low-density lipoprotein-induced dysfunction in vascular endothelial cells through targeting miR-328-3p/TRIM14 axis in atherosclerosis

BackgroundCircular RNAs have shown important regulatory roles in cardiovascular diseases, containing atherosclerosis (AS). We intended to explore the role of circ_0004104 in AS using oxidized low-density lipoprotein (ox-LDL)-induced vascular endothelial cells and its associated mechanism.MethodsReal-time quantitative polymerase chain reaction and Western blot assay were conducted to analyze RNA levels and protein levels, respectively. Cell viability, apoptosis, angiogenic ability and inflammatory response were assessed by 3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide (MTT) assay, flow cytometry, capillary-like network formation assay and enzyme-linked immunosorbent assay, respectively. Cell oxidative stress was assessed using commercial kits. Dual-luciferase reporter assay, RNA immunoprecipitation assay and RNA-pull down assay were performed to verify the intermolecular interaction.Resultsox-LDL exposure up-regulated the level of circ_0004104 in HUVECs. ox-LDL exposure suppressed cell viability and angiogenic ability whereas promoted the apoptosis, inflammation and oxidative stress of HUVECs partly through up-regulating circ_0004104. MicroRNA-328-3p (miR-328-3p) was confirmed as a target of circ_0004104. MiR-328-3p interference largely reversed circ_0004104 silencing-mediated effects in HUVECs upon ox-LDL exposure. MiR-328-3p interacted with the 3′ untranslated region of tripartite motif 14, and circ_0004104 positively regulated TRIM14 expression by sponging miR-328-3p. TRIM14 overexpression largely overturned miR-328-3p accumulation-induced influences in HUVECs upon ox-LDL exposure.ConclusionCirc_0004104 knockdown attenuated ox-LDL-induced dysfunction in HUVECs via miR-328-3p-mediated regulation of TRIM14.

CD31+ Circulating Angiogenic Cell Number and Subtypes are Reduced in Individuals with Chronic Stroke.

Reduced number and function of CD31+ circulating angiogenic cells (CACs) may explain vascular complications associated with the chronic phase stroke. The purpose of this study was to quantify CD31+ CAC paracrine function, total number and number of various subtypes of CD31+ CACs in individuals with chronic stroke compared with controls. Peripheral blood mononuclear cells were isolated from chronic stroke participants and controls. CD31+ cells were quantified by flow cytometry, as was co-expression of CD31 in combination with CD14, CD3, CD11b, or CD34. Immunomagnetically selected CD31+ cells were cultured, and conditioned medium was used in a capillary-like network assay. Significantly lower levels of CD31+ CACs were found in stroke participants compared with controls (-24%; P=0.04). Additionally, CD31+/CD14+, CD31+/CD11b+ and CD31+/CD3+ cells were significantly lower in the chronic stroke group compared with controls (-45%, P=0.02; -47%, P=0.02 and -32%, P=0.03, respectively). There was no group effect on CD31+ CAC conditioned media-mediated capillary-like network formation. CD31+ CACs and subtypes may serve as potential therapeutic targets in chronic stroke recovery.

MiR-181a, delivered by hypoxic PTC-secreted exosomes, inhibits DACT2 by downregulating MLL3, leading to YAP-VEGF-mediated angiogenesis

Papillary thyroid cancer (PTC) is the most common type of thyroid cancer, and angiogenesis plays critical roles in its recurrence and metastasis. In this study, we investigated the effects of hypoxia-induced exosomal microRNA-181 (miR-181a) from PTC on tumor growth and angiogenesis. Thyroid-cancer-related differentially expressed miR-181a was identified by microarray-based analysis in the Gene Expression Omnibus (GEO) database. We validated that miR-181a was highly expressed in PTC cells and even more so in cells cultured under hypoxic conditions, which also augmented exosome secretion from PTC cells. Exosomes extracted from PTC cells with manipulated miR-181a and mixed-lineage leukemia 3 (MLL3) were subjected to normoxic or hypoxic conditions. Human umbilical vein endothelial cells (HUVECs) were transfected with miR-181a inhibitor/mimic or small interfering RNA (siRNA)-MLL3 or treated with exosomes from hypoxic PTC cells. Hypoxic exosomal miR-181a delivery promoted proliferation and capillary-like network formation in HUVECs. Mechanistically, miR-181a targeted and inhibited MLL3. Furthermore, miR-181a downregulated DACT2 and upregulated YAP and vascular endothelial growth factor (VEGF). Further, hypoxic exosomal miR-181a induced angiogenesis and tumor growth in vivo, which was reversed by hypoxic exosomal miR-181a inhibitor. In conclusion, exosomal miR-181a from hypoxic PTC cells promotes tumor angiogenesis and growth through MLL3 and DACT2 downregulation, as well as VEGF upregulation.

High‐throughput fabrication of vascularized adipose microtissues for 3D bioprinting

For patients with soft tissue defects, repair with autologous in vitro engineered adipose tissue could be a promising alternative to current surgical therapies. A volume-persistent engineered adipose tissue construct under in vivo conditions can only be achieved by early vascularization after transplantation. The combination of 3D bioprinting technology with self-assembling microvascularized units as building blocks can potentially answer the need for a microvascular network. In the present study, co-culture spheroids combining adipose-derived stem cells (ASC) and human umbilical vein endothelial cells (HUVEC) were created with an ideal geometry for bioprinting. When applying the favourable seeding technique and condition, compact viable spheroids were obtained, demonstrating high adipogenic differentiation and capillary-like network formation after 7 and 14 days of culture, as shown by live/dead analysis, immunohistochemistry and RT-qPCR. Moreover, we were able to successfully 3D bioprint the encapsulated spheroids, resulting in compact viable spheroids presenting capillary-like structures, lipid droplets and spheroid outgrowth after 14 days of culture. This is the first study that generates viable high-throughput (pre-)vascularized adipose microtissues as building blocks for bioprinting applications using a novel ASC/HUVEC co-culture spheroid model, which enables both adipogenic differentiation while simultaneously supporting the formation of prevascular-like structures within engineered tissues in vitro.