Capillary Gel Electrophoresis Research Articles

Tracing CRISPR/Cas12a Mediated Genome Editing Events in Apple Using High-Throughput Genotyping by PCR Capillary Gel Electrophoresis.

The use of the novel CRISPR/Cas12a system is advantageous, as it expands the possibilities for genome editing (GE) applications due to its different features compared to the commonly used CRISPR/Cas9 system. In this work, the CRISPR/Cas12a system was applied for the first time to apple to investigate its general usability for GE applications. Efficient guide RNAs targeting different exons of the endogenous reporter gene MdPDS, whose disruption leads to the albino phenotype, were pre-selected by in vitro cleavage assays. A construct was transferred to apple encoding for a CRISPR/Cas12a system that simultaneously targets two loci in MdPDS. Using fluorescent PCR capillary electrophoresis and amplicon deep sequencing, all identified GE events of regenerated albino shoots were characterized as deletions. Large deletions between the two neighboring target sites were not observed. Furthermore, a chimeric composition of regenerates and shoots that exhibited multiple GE events was observed frequently. By comparing both analytical methods, it was shown that fluorescent PCR capillary gel electrophoresis is a sensitive high-throughput genotyping method that allows accurate predictions of the size and proportion of indel mutations for multiple loci simultaneously. Especially for species exhibiting high frequencies of chimerism, it can be recommended as a cost-effective method for efficient selection of homohistont GE lines.

Simple, rapid, and reproducible capillary gel electrophoresis separation and laser-induced fluorescence detection of DNA topoisomers with unmodified fused silica separation capillaries.

The topology of DNA is a critical quality attribute for plasmid-based pharmaceuticals, making quantification of trace levels of plasmid topoisomers an important analytical priority. An automated and cost-effective method based on capillary gel electrophoresis laser-induced fluorescence detection is described. The method outlined in this report is significant because it is easily implemented by any laboratory for which routine analyses of plasmid topology are critical for the development of new plasmid-based therapies as well as for quality control of gene therapies utilizing supercoiled DNA. Detection of topoisomers was achieved by incorporating ethidium bromide in the separation medium. The detector response was improved by 3 orders of magnitude by utilizing a 605-nm optical filter with a 15-nm bandwidth. Separations of linear, open circle, supercoiled, and multimer DNAplasmids ranging from 4.2 to 10.5kbp were accomplished in under 6min using an unmodified fused silica capillary (50-μm internal diameter). The background electrolyte was comprised of 0.5% gel, which was hydroxypropylmethyl cellulose, 1mM ethylenediaminetetraacetic acid, and 50mMN-(2-acetamido)-2-aminoethanesulfonic acid (pH of 6.25). The separations, which balanced the bulk electroosmotic flow, the electrophoretic mobility of the DNA, and gel sieving were dependent upon the pH of the electrolyte and the gel concentration. Reproducibility was dependent upon the procedure used to prepare the gel as well as other factors including the ethidium bromide concentration and capillary conditioning. A single unmodified capillary operated for more than 150 runs had an across-day migration time precision of 1% relative standard deviation and percent area precision of 10% relative standard deviation.

Applications of capillary electrophoresis for biopharmaceutical product characterization.

Capillary electrophoresis (CE), after being introduced several decades ago, has carved out a niche for itself in the field of analytical characterization of biopharmaceutical products. It does not only offer fast separation, high resolution in miniaturized format, but equally importantly represents an orthogonal separation mechanism to high-performance liquid chromatography. Therefore, it is not surprising that CE-based methods can be found in all major pharmacopoeias and are recommended for the analysis of biopharmaceutical products during process development, characterization, quality control, and release testing. Different separation formats of CE, such as capillary gel electrophoresis, capillary isoelectric focusing, and capillary zone electrophoresis are widely used for size and charge heterogeneity characterization as well as purity and stability testing of therapeutic proteins. Hyphenation of CE with MS is emerging as a promising bioanalytical tool to assess the primary structure of therapeutic proteins along with any impurities. In this review, we confer the latest developments in capillary electrophoresis, used for the characterization of critical quality attributes of biopharmaceutical products covering the past 6 years (2015-2021). Monoclonal antibodies, due to their significant share in the market, have been given prioritized coverage.

Rapid Antibody Glycoengineering in CHO Cells Via RNA Interference and CGE-LIF N-Glycomics.

The impact of the glycan distribution on the in vivo function and half-life of monoclonal antibodies has long motivated the genetic engineering of producer cells to achieve structures that enhance efficacy, safety and stability. To facilitate glycoengineeringof IgG-producing Chinese hamster ovary cells, we present a rapid protocol that involves the use of RNA interference for the knockdown of genes of interest coupled with capillary gel electrophoresis and laser-induced fluorescence detection (CGE-LIF) for fast, high-throughput glycan analysis. We apply this methodology to the Fut8 gene, responsible for the addition of core fucose, which is a typical target for increasing antibody-dependent cellular cytotoxicity.

Conventional Gel Electrophoresis and TaqMan Probes Enable Rapid Confirmation of Thousand Cankers Disease from Diagnostic Samples.

Thousand cankers disease (TCD) is caused by the fungal pathogen Geosmithia morbida and vectored by the walnut twig beetle Pityophthorus juglandis. In infected walnut and butternut (Juglans spp.) hosts and wingnut species (Pterocarya spp.) hosts, tree decline and death results in ecological disruption and economic losses. A rapid molecular detection protocol for TCD using microsatellite markers can confirm the presence of insect vector or fungal pathogen DNA, but it requires specialized expensive equipment and technical expertise. Using four different experimental approaches, capillary and conventional gel electrophoresis, and traditional polymerase chain reaction (PCR) and quantitative PCR (qPCR), we describe simplified and inexpensive processes for diagnostic confirmation of TCD. The improved and rapid detection protocols reported in this study reduce time and equipment costs associated with detection of molecular pest and pathogen DNA by (1) using conventional gel electrophoresis or TaqMan molecular probes to elucidate the detection limits for G. morbida and P. juglandis DNA and (2) identifying resources that allow visualization of positive test results for infected host plant tissue samples. Conventional gel electrophoresis and TaqMan molecular probe protocols detected presence of DNA from TCD-associated fungal and insect samples. These procedural improvements can be readily adopted by diagnostic end-users and adapted for use with other complex disease systems to enable rapid pest and pathogen detection.[Formula: see text] Copyright © 2021 The Author(s). This is an open access article distributed under the CC BY-NC-ND 4.0 International license.

Combining functional metagenomics and glycoanalytics to identify enzymes that facilitate structural characterization of sulfated N-glycans

BackgroundSulfate modification of N-glycans is important for several biological functions such as clearance of pituitary hormones or immunoregulation. Yet, the prevalence of this N-glycan modification and its functions remain largely unexplored. Characterization of N-glycans bearing sulfate modifications is hampered in part by a lack of enzymes that enable site-specific detection of N-glycan sulfation. In this study, we used functional metagenomic screening to identify enzymes that act upon sulfated N-acetylglucosamine (GlcNAc). Using multiplexed capillary gel electrophoresis with laser-induced fluorescence detection (xCGE-LIF) -based glycoanalysis we proved their ability to act upon GlcNAc-6-SO4 on N-glycans.ResultsOur screen identified a sugar-specific sulfatase that specifically removes sulfate from GlcNAc-6-SO4 when it is in a terminal position on an N-glycan. Additionally, in the absence of calcium, this sulfatase binds to the sulfated glycan but does not remove the sulfate group, suggesting it could be used for selective isolation of sulfated N-glycans. Further, we describe isolation of a sulfate-dependent hexosaminidase that removes intact GlcNAc-6-SO4 (but not asulfated GlcNAc) from a terminal position on N-glycans. Finally, the use of these enzymes to detect the presence of sulfated N-glycans by xCGE-LIF is demonstrated.ConclusionThe present study demonstrates the feasibility of using functional metagenomic screening combined with glycoanalytics to discover enzymes that act upon chemical modifications of glycans. The discovered enzymes represent new specificities that can help resolve the presence of GlcNAc-6-SO4 in N-glycan structural analyses.

Capillary sodium dodecyl sulfate gel electrophoresis of proteins: Introducing the three dimensional Ferguson method

One of the most extensively utilized rapid characterization, release and stability testing methods of therapeutic proteins in the biopharmaceutical field today is capillary SDS gel electrophoresis using borate cross-linked high molecular weight dextran. In spite of its widespread use, however, the gel composition dependent separation characteristics of this very unique sieving matrix has not been investigated yet. Introduction of three dimensional (3D) Ferguson plots, based on simultaneous variation of the dextran (D) and borate (B) concentrations generating 16 different D/B ratio gels, allowed better understanding of the electromigration process of the SDS-protein complexes. As a result of this comprehensive study, non-linear 3D logarithmic mobility vs dextran and borate concentration surfaces were obtained. Both, the molecular weight protein standards and the new modality fusion protein etanercept resulted in concave 3D Ferguson plots. The interplay between the electroosmotic flow and the viscosity of the matrices played a key role in the resulting migration time and resolution. Selectivity values were defined and evaluated in 3D graph formats for the regular and de-N-glycosylated subunits of etanercept, as well as for the latter with the 10 kDa internal standard to understand both the dextran-borate complexation and sized based selectivities. KR plots of the retardation coefficients as the function of the logarithmic molecular weights were used to more precisely assess the Mw of the samples and to obtain information about the molecular characteristics of the electromigrating SDS-protein complexes.

A Novel Approach for the Synthesis of Human Heteropolymer Ferritins of Different H to L Subunit Ratios

Mammalian ferritins are predominantly heteropolymeric species consisting of 24 structurally similar, but functionally different subunit types, named H and L, that co-assemble in different proportions. Despite their discovery more than 8 decades ago, recombinant human heteropolymer ferritins have never been synthesized, owing to the lack of a good expression system. Here, we describe for the first time a unique approach that uses a novel plasmid design that enables the synthesis of these complex ferritin nanostructures. Our study reveals an original system that can be easily tuned by altering the concentrations of two inducers, allowing the synthesis of a full spectrum of heteropolymer ferritins, from H-rich to L-rich ferritins and any combinations in-between (isoferritins). The H to L subunit composition of purified ferritin heteropolymers was analyzed by SDS-PAGE and capillary gel electrophoresis, and their iron handling properties characterized by light absorption spectroscopy. Our novel approach allows future investigations of the structural and functional differences of isoferritin populations, which remain largely obscure. This is particularly exciting since a change in the ferritin H- to L-subunit ratio could potentially lead to new iron core morphologies for various applications in bio-nanotechnologies.

Interaction of water soluble cationic gallium(III) phthalocyanines with different G-quadruplex DNAs

Small molecule-G-quadruplex DNA interaction has been gained considerable interest due to existence of G-quadruplex structures in telomeres and promotor regions of proto-oncogenes. In the present study, the interaction of 2(3), 9(10), 16(17), 23(24)-tetrakis-[(N-methyl-3-pyridyloxy)phthalocyaninato]chloro gallium (III) sulphate (TGaPc) and 2, 3, 9, 10, 16, 17, 23, 24-octakis-[(N-methyl-3-pyridyloxy) phthalocyaninato]chloro gallium (III) sulphate (OGaPc) with different DNA forms (ctDNA and G-quadruplex DNAs) was investigated. The interactions of compounds with DNA was extensively investigated by different methods, such as capillary gel electrophoresis (CGE) integrated with a high sensitivity LED-induced fluorescence detector, UV–Vis and circular dichroism spectroscopy, competitive dialysis experiments. UV–Vis. titrations and CGE studies showed that the two phthalocyanine compounds interacted with the G-quadruplex and ctDNA, but the binding affinity of TGaPc was high for AS1411. Dialysis experiments also supported the higher affinity of TGaPc to AS1411. CD studies showed that both TGaPc and OGaPc caused destabilization of Tel21 structure even at low concentrations. This was more or less observed in other G-quadruplex DNAs other than AS1411. The structure of AS1411 remained intact at binding stoichiometric ratios. The viscosimetric studies and gel electrophoresis studies have been used to explore the interaction of TGaPc and OGaPc with ctDNA. The viscosity experiments along with gel electrophoresis confirmed the intercalation binding for ctDNA with OGaPc and groove binding for TGaPc. All results show that these molecules interact with different DNA types at different strengths and different mechanisms and the binding affinity of TGaPc was high for AS1411. Therefore, these compounds have the potential for cancer treatment.

Microfiltration and Ultrafiltration Process to Produce Micellar Casein and Milk Protein Concentrates with 80% Crude Protein Content: Partitioning of Various Protein Fractions and Constituents

The objective of the study reported in this research paper was to produce micellar casein concentrate (MCC) and milk protein concentrate (MPC) with 80% crude protein relative to total solids (TS) using MF and UF processes respectively. Additionally, capillary gel electrophoresis (CGE) was used to study the protein fractions in retentate and permeate. For MCC production, 227 L of pasteurized SM was subjected to MF using 0.5-micron spiral wound polyvinylidene fluoride membrane. During the process, diafiltration (DF) water was added at six intervals, totaling 100% of the feed volume. For MPC production, 227 L of pasteurized SM from the same lot was subjected to UF using 10 kDa Polyethersulfone membranes. During the process, DF water was added at four different intervals, with a final total addition of 40% of the feed volume. Both processes used a volume reduction of five. There were significant (p < 0.05) differences in all of the compositional parameters, except fat and casein for the MF retentate (MFR) and UF retentate (UFR). UFR had a higher crude protein (CP), TS, lactose, ash and calcium content as compared to MFR and this affected the CP/TS ratio found in both the retentates. The differences in membrane pore sizes, operating pressures and level of DF used all contributed to the differences in final CP/TS ratio obtained. The CGE analysis of individual protein fractions present in the UFR and MFR showed that UFR has a β-lactaglobulin to α-lactalbumin (α-LA) ratio similar to SM, whereas the MFR has a higher ratio, indicating preferential transmission for α-LA by the MF membrane. The results from this study show that MF and UF processes could be used for production of MCC and MPC with similar CP/TS ratio with careful selection of operating parameters, and that CGE can be used for detailed analysis of various protein fractions.

Characterization of Adeno-Associated Virus Capsid Proteins with Two Types of VP3-Related Components by Capillary Gel Electrophoresis and Mass Spectrometry.

Recombinant adeno-associated virus is a leading platform in human gene therapy. The adeno-associated virus (AAV) capsid is composed of three viral proteins (VPs): VP1, VP2, and VP3. To ensure the safety of AAV-based gene therapy products, the stoichiometry of VPs of AAV vector should be carefully monitored. In this study, sodium dodecyl sulfate-polyacrylamide gel electrophoresis, capillary gel electrophoresis (CGE), and liquid chromatography-UV-mass spectrometry (LC-UV-MS) were performed to evaluate the VP components of AAV1, AAV2, and AAV6. Two types of VP3-related components, VP3 variant and VP3 fragment, were identified. The VP3 variant was the N-terminal shorter VP3, of which the translation started at M211, not at the conventional initiation codon, M203. The VP3 variant could be generated by leaky scanning of the first initiation codon of VP3. We also showed that the VP3 variant was identified in a minor peak before VP3 in CGE measurement. Meanwhile, the VP3 fragment was the C-terminal cleaved VP3, of which the sequence of VP3 ended at D590 or D626, indicating that cleavage occurred between D590 and P591, or D626 and G627. The cause of the cleavage of the DP or DG sequence was hydrolysis due to low pH of the mobile phase and high temperature of the column oven in the LC system, which was necessary to clearly separate the peak of VPs. VP3 fragments, detected only in LC-UV-MS in small amount account with less than 3% of total peak area, should be included in the quantification of VP3. Finally, the relationship of VP stoichiometry determined by the above three methods was discussed. From this study, we proposed that the VP components of AAV should be complementarily evaluated by CGE and LC-UV-MS.

Capillary electrophoresis of DNA with high resolution based on copoly(pentaerythritoltetra succinimidylcarboxypentyl/aminopropyl polyoxyethylene) hydrogel

Capillary gel electrophoresis is widely applied for determination of sequence and size of DNA, in which the sieving gel plays an unignorable role. Herein, a pore-size controllable hydrogel was synthesized in the capillary with two symmetrical tetrahedron-like macromonomers consisting of pentaerythritoltetra (succinimidylcarboxypentyl) polyoxyethylene (PS) and pentaerythritoltetra (aminopropyl) polyoxyethylene) (PA). By capillary electrophoresis of the DNA fragments with this hydrogel, it is found that a homogenous structure of hydrogel which is more suitable for the DNA separation can be achieved when the molecular weight of PA is approximate to that of PS. DNA fragments smaller than 1500 bp can be well resolved in this hydrogel within 13 min. More than 100 consecutive runs can be carried out in such a dynamically coated capillary before performance begins to degrade. Notably, such hydrogel can realize separation of dsDNA up to single base pair resolution and same length of dsDNA with 1 bp difference.

Fundamentals of Capillary Electrophoretic Migration and Separation of SDS Proteins in Borate Cross-Linked Dextran Gels.

Recent progress in the development and production of new, innovative protein therapeutics require rapid and adjustable high-resolution bioseparation techniques. Sodium dodecyl sulfate capillary gel electrophoresis (SDS-CGE) using a borate (B) cross-linked dextran (D) separation matrix is widely employed today for rapid consistency analysis of therapeutic proteins in manufacturing and release testing. Transient borate cross-linking of the semirigid dextran polymer chains leads to a high-resolution separation gel for SDS-protein complexes. To understand the migration and separation basis of the D/B gel, the present work explores various gel formulations of dextran monomer (2, 5, 7.5, and 10%) and borate cross-linker (2 and 4%) concentrations. Ferguson plots were analyzed for a mixture of protein standards with molecular weights ranging from 20 to 225 kDa, and the resulting nonlinear concave curves pointed to nonclassical sieving behavior. While the 2% D/4% B gel resulted in the fastest analysis time, the 10% D/2% B gel was found to produce the greatest separation window, even higher than with the 10% D/4% B gel, due to a significant increase in the electroosmotic flow of the former composition in the direction opposite to SDS-protein complex migration. The study then focused on SDS-CGE separation of a therapeutic monoclonal antibody and its subunits. A combination of molecular weight and shape selectivity as well as, to a lesser extent, surface charge density differences (due to glycosylation on the heavy chain) influenced migration. Greater molecular weight selectivity occurred for the higher monomer concentration gels, while improved glycoselectivity was obtained using a more dilute gel, even as low as 2% D/2% B. This latter gel took advantage of the dextran-borate-glycoprotein complexation. The study revealed that by modulating the dextran (monomer) and borate (cross-linker) concentration ratios of the sieving matrix, one can optimize the separation for specific biopharmaceutical modalities with excellent column-to-column, run-to-run, and gel-to-gel migration time reproducibilities (<0.96% relative standard deviation (RSD)). The widely used 10% dextran/4% borate gel represents a good screening option, which can then be followed by a modified composition, optimized for a specific separation as necessary.

A Simple, Accurate and Cost-Effective Capillary Electrophoresis Test with Computational Methods to Aid in Universal Microsatellite Instability Testing.

Background: Microsatellite instability (MSI) testing is important for the classification of Lynch syndrome, as a prognostic marker and as a guide for adjuvant chemotherapy in colorectal cancer (CRC). The gold standard for determining MSI status has traditionally been fluorescent multiplex polymerase chain reaction (PCR) and capillary gel electrophoresis (CGE). However, its use in the clinical setting has diminished and has been replaced by immunohistochemical (IHC) detection of loss of mismatch repair protein expression due to practicability and cost. The aim of this study was to develop a simple, cost-effective and accurate MSI assay based on CGE. Method: After amplification of microsatellites by polymerase chain reaction (PCR) using the National Cancer Institute (NCI) panel (BAT 25, BAT26, D5S346, D2S123, D17S250) of MSI markers, parallel CGE was utilized to classify colorectal cancers as MSI-H, MSI-L and MSS using the 5200 Fragment Analyzer System. Cell lines and patient cancer specimens were tested. DNA from 56 formalin-fixed paraffin-embedded cancer specimens and matched normal tissue were extracted and CGE was performed. An automated computational algorithm for MSI status determination was also developed. Results: Using the fragment analyser, MSI status was found to be 100% concordant with the known MSI status of cell lines and was 86% and 87% concordant with immunohistochemistry (IHC) from patient cancer specimens using traditional assessment and our MSI scoring system, respectively, for MSI determination. The misclassification rate was mainly attributed to IHC, with only one (1.8%) sampling error attributed to CGE testing. CGE was also able to distinguish MSI-L from MSI-H and MSS, which is not possible with IHC. An MSI score based on total allelic variability that can accurately determine MSI status was also successfully developed. A significant reduction in cost compared with traditional fluorescent multiplex PCR and CGE was achieved with this technique. Conclusions: A simple, cost-effective and reliable method of determining MSI status and an MSI scoring system based on an automatic computational algorithm to determine MSI status, as well as degree of allelic instability in colorectal cancer, has been developed using the 5200 Fragment Analyzer System.

A Schistosoma mansoni tri- and tetramer microsatellite catalog for genetic population diversity and differentiation

All Schistosoma mansoni tri- and tetranucleotide repeat microsatellites published as of December 2018 were identified. All 52 were evaluated for autosomal location, strength of amplification, scorability and behavior as single-copy loci by polyacrylamide and capillary gel electrophoresis. Of these, 27 were unique, autosomal, polymorphic, easily scored and single copy as assessed on pooled adult worm DNA from two different continental origins and adult worm clones. These microsatellites were distributed across all seven autosomal chromosomes. On laboratory strains their heterozygosity ranged from 0.22 to 0.77. Individual markers had 5–13 alleles, allelic richness of 2–10 and an effective allele number of 1.3–8.14. Those infected by Schistosoma mansoni carry many genetically distinct, sexually reproducing parasites, therefore, for an individual infection the complete allele frequency profile of their progeny consists of a pool of DNA from multiple diploid eggs. Using a set of 25 microsatellites, we calculated allele frequency profiles of eggs in fecal samples from people in two Brazilian communities separated by 6 km: Jenipapo (n = 80) and Volta do Rio (n = 38). There were no a priori characteristics that could predict the performance of markers in natural infections based on their performance with laboratory strains. Increasing marker number did not change accuracy for differentiation and diversity but did improve precision. Our data suggest that using a random set of 10–20 microsatellites appears to result in values that exhibit low standard deviations for diversity and differentiation indices. All identified microsatellites as well as PCR conditions, allele size, primer sequences and references for all tri- and tetramer microsatellites markers presented in this work are available at: https://sites.google.com/case.edu/cwru-and-fiocruz-wdrc/home.

Genetic testing and prenatal diagnosis of two pedigrees affected with Huntington disease

To explore the genetic basis for two Chinese pedigrees affected with Huntington disease and provide prenatal diagnosis for them. Peripheral venous blood samples were collected from the probands. PCR and capillary gel electrophoresis were used to determine the number of CAG repeats in their IT15 gene. Pre-symptomatic testing was offered to their children and relatives, and prenatal diagnosis was provided to three pregnant women from the two pedigrees. The two probands, in addition with three asymptomatic members, were found to have a (CAG)n repeat number greater than 40. Upon prenatal diagnosis, the numbers of CAG repeats in two fetuses from pedigree 1 were determined as (16, 19) and (18, 19), both were within the normal range. A fetus from pedigree 2 was found to have a CAG repeat number of (15, 41), which exceeded the normal range. Genetic testing can facilitate the diagnosis of Huntington disease and avoid further birth of affected children.

Effect of Restriction of Fluoroquinolone Antibiotics on Clostridioides difficile Infections in the University Hospital Hradec Králové.

Clostridioides difficile is the most common pathogen responsible for hospital-acquired diarrhea. This complication of antibiotic treatment mainly endangers the health of elder patients. Preventing the development of C. difficile infections (CDI) is still a challenge that needs to be addressed. In our study, the results of 872 C. difficile positive stool samples were used to describe the epidemiological situation affected by a change in the prescription of fluoroquinolone antibiotics. In a total, 93 of strains were typed by polymerase chain reaction (PCR) and capillary gel electrophoresis. Between years 2014 and 2018 the decline in the fluoroquinolones consumption was 69.3 defined daily dose (DDD) per 1000 patient-days (from 103.3 to 34.0), in same period CDI incidence declined by 1.3 cases per 10,000 patient-bed days (from 5.6 to 4.3). Results of epidemiologic and statistical analysis shows that decline in fluoroquinolones consumption has significant influence on CDI incidence and prevalence of hypervirulent strains. In the University Hospital Hradec Králové properly managed antibiotic stewardship policy has reduced CDI incidence by 23.2% and lowered rate of hypervirulent ribotypes 001 and 176.

Investigation of Binding behaviour of a water-soluble gallium (III) phthalocyanine with double-stranded and G-quadruplex DNA via experimental and computational methods

DNA is an important target for the development of chemotherapeutic drug design due to increased and uncontrolled cell proliferation of cancer cells. In the present study, the affinity of water-soluble gallium(III) phthalocyanine chloride (GaPc) non-peripherally substituted with 2-mercapto-N-methylpyridinium groups to different types of DNA (double-stranded ctDNA and G-quadruplex DNA) was investigated. The interaction mechanisms were evaluated by UV-Vis, fluorescence and circular dichroism spectroscopic techniques, competitive dialysis assay, and capillary gel electrophoresis (CGE) system integrated with a high sensitivity LED-induced fluorescence (LIF) detector. Binding mode studies were carried out by molecular docking and molecular dynamic simulations. The experimental binding constants were determined as 1.9 × 106 M−1, 1.1 × 106 M−1, 8.5 × 105 M−1, 2.9 × 104 M−1 for c-MYC, AS1411, Tel21, and ctDNA, respectively. Competitive binding assay confirmed the higher affinity towards G-quadruplex structure rather than ctDNA. The GaPc-G-quadruplex DNA conjugates showed higher Kb constants and a strong absorption band closer to NIR window which is a desired feature for the photodynamic therapy applications. Besides, experimental data show that the formation of GaPc-G-quadruplex DNA conjugates reduced the aggregation of GaPc. Reduction of aggregation of phthalocyanine is important. Because aggregation decreases the photoactivity of most photosensitizers. The experimental results suggested that both intercalative and non‑intercalative binding contributions occurred in the case of double-stranded ctDNA. Confirming experiments, molecular docking studies showed that the GaPc can bind from two different major groove regions in double-stranded DNA while only one binding mode was observed in the G-quadruplex DNA. Both experimental and computational studies suggested that the conformational change and unfolding mechanism in G-quadruplex DNA structure were determined upon interaction with GaPc.

Multilevel capillary gel electrophoresis characterization of new antibody modalities

Capillary gel electrophoresis-based methods were applied to comprehensively characterize two development phase new modality monoclonal antibodies including a glycoengineered and a bispecific test compound. The samples were subjected to multilevel characterization at the intact (both by SDS-SGE and cIEF) as well as the reduced protein and the released N-glycan levels. SDS capillary gel electrophoresis analysis showed excellent separation of the light and heavy chains of both samples. The bispecific antibody required a special temperature gradient denaturation process and a longer capillary to resolve its two light chain fragments. Separation of PNGase F digested antibodies revealed migration time shifts, suggesting the presence of N-linked glycosylation on the corresponding subunits. For efficient glycan removal, the highly glycosylated glycoengineered monoclonal antibody was trypsin digested prior to the endoglycosidase treatment. The released glycans were profiled by capillary gel electrophoresis after APTS labeling and their oligosaccharide structures were identified by exoglycosidase based carbohydrate sequencing. Finally, capillary isoelectric focusing shed light on the charge heterogeneity of the test compounds, providing important complementary information. A flowchart was established for workflow optimization.

Fluorescence coupled capillary electrophoresis as a strategy for tetrahedron DNA analysis

A strategy based on fluorescence coupled capillary electrophoresis (CE-FL) was developed for analyzing tetrahedron DNA (TD) and TD-doxorubicin (DOX) conjugate. Capillary gel electrophoresis exhibited desirable performance for separating TD and DNA strands. Under the optimized conditions, satisfactory repeatability concerning run-to-run and interday repeatability was obtained, and relative standard deviation value of resolution (n = 6) was 0.64%. Furthermore, the combination of CE and fluorescence detection provided a sensitive platform for quantifying TD concentration and calculating the damage degree of TD. The electrophoretograms indicated that CE-FL was a suitable TD assay method with high specificity and sensitivity. In addition, the application of CE-FL for TD fluorescence resonance energy transfer (FRET) research was also explored. Two types of DNA strands were utilized to interfere the formation of TD. The impact of partially complementary chain and completely complementary chain on FRET signal was explored, and the influence mechanism was discussed. After applying CE-FL for characterizing TD, we also combine CE and FRET to analyze TD-DOX conjugate. CE presented a favourable technique to monitor DOX loading and releasing processes. These noteworthy results offered a stepping stone for DNA nanomaterials assay by using CE-FL.