Capillary Electrophoresis-diode Array Detection Research Articles

Determination of sulfonamide antibiotics by magnetic porous carbon solid-phase extraction coupled with capillary electrophoresis

Sulfonamide antibiotics (SAs) have been widely used as antibacterial drugs for the prevention and treatment of livestock and poultry diseases, but they seriously threaten human health because they can accumulate in humans. Therefore, it is highly important to develop methods for monitoring sulfonamide residues in aquaculture and food. In this research, based on the generation of porous carbon (PC) by the pyrolysis of sodium citrate, magnetic porous carbon (PC@Fe3O4) was synthesized by a solvothermal method and used as an adsorbent for the magnetic solid-phase extraction of SAs. The effects of the proportion of PC in PC@Fe3O4, adsorbent dosage, adsorption time, eluent type, extraction pH, salt concentration and eluent dosage on the extraction efficiency were systematically studied. The adsorption performance and behavior of PC@Fe3O4 on SAs were evaluated using adsorption kinetics and adsorption isotherms, and the adsorption mechanism was preliminarily discussed. Under optimal conditions, combined with capillary electrophoresis diode array detection, a sensitive detection method for SAs was developed. The proposed method can be used for the determination of six SAs in fishpond water and milk samples, with a linear range of 0.5–200 ng mL−1, detection limits of 0.24–0.34 ng mL−1, and spiked recoveries of 85.9–109.0 %.

A rapid and simple capillary electrophoresis procedure for quantification of vanillylmandelic acid in urine samples

Aim: To develop a one-step vortex-assisted liquid-liquid extraction (VALLE) method, without the need for evaporation and reconstitution steps, to establish a rapid and straightforward treatment procedure based on capillary electrophoresis-diode array detection (CE-DAD) for the determination of vanillylmandelic acid (VMA) in human urine. Methodology: Optimization of VALLE and CE-DAD procedures were studied in detail. The effects of various experimental parameters, such as the type of the extraction solvent, sample pH, salt addition, and extraction time were investigated. Also, CE separation conditions including background electrolyte type, concentration, and pH, injection time and separation voltage were optimized as well. Results: A successful separation of VMA was achieved in less than 6 min using a basic background electrolyte composed of 60 mmol·L-1 acetate/ACN (acetonitrile) 50% (v/v) (final apparent pH is 5.73). The linear response was obtained over the concentration range from 1.0 to 14 μg·mL-1. The limit of detection and quantification were 0.30 and 1.0 μg·mL-1, respectively. The intra- and inter-day precisions were found to be less than 4.3%. The extraction recoveries of VMA were between 95%-97%. Conclusion: The developed method is found to be a simple, rapid, and reliable method for quantitative analysis of urinary VMA.

Metal organic framework assisted in situ complexation for miniaturized solid phase extraction of organic mercury in fish and Dendrobium officinale

Zirconium-based metal−organic frameworks, namely Zr-based MOF, was employed as adsorbent material in the miniaturized solid phase extraction of organic mercury compounds in food prior to capillary electrophoresis-diode array detector analysis. The synthesized adsorbent was characterized by different spectroscopic techniques. Parameters influencing the extraction and complexation of methylmercury chloride, ethylmercury chloride and phenylmercury chloride such as type of eluent solvent, type and amount of adsorbent were investigated. In addition, linear ranges contained 2.00–300.00 ng mL−1 for MeHg+, 5.00–500.00 ng mL−1 for EtHg+ and PhHg+, and the established method presented good linearity (R2 ≥ 0.998). Under the optimized experimental conditions, the ranges of detection limit and quantitation limit were 0.022–0.067 ng mL−1 and 0.073–0.220 ng mL−1, respectively. The relative standard deviations of intra- and inter-day analysis were less than 3.2 and 3.1%, respectively. Trueness of the present method was successfully accomplished by means of the recovery assays (81.4–98.5%) in the blank samples with two concentration levels. The repeatability %RSD of the method was lower than 2.7%. Overall, the developed approach proved to have the latent capability to be utilized in routine analysis of organic mercury compounds in fish and Dendrobium officinale.

Microwave-Assisted Extraction Combined with In-Capillary [Fe(ferrozine)3]2+-CE-DAD to Screen Active Components with the Ability to Chelate Ferrous Ions from Flos Sophorae Immaturus (Flos Sophorae).

An efficient microwave-assisted extraction (MAE) combined with in-capillary [Fe(ferrozine)3]2+-capillary electrophoresis-Diode Array Detector (in-capillary [Fe(ferrozine)3]2+-CE-DAD) was developed to screen active components with the ability to chelate ferrous ions and determine the total antioxidant activity. The MAE conditions, including methanol concentration, extraction power, extraction time, and the ratio of material to liquid, were optimized by an L9(34) orthogonal experiment. Background buffer, voltage, and cartridge temperature that affect the separation of six compounds were optimized. It was found that rutin and quercetin were the main components chelating ferrous ions in Flos Sophorae Immaturus (Flos Sophorae) by the in-capillary [Fe(ferrozine)3]2+-CE-DAD. The recoveries were ranged from 95.2% to 104%. It was concluded that the MAE combined with in-capillary [Fe(ferrozine)3]2+-CE-DAD method was a simple, reliable, and efficient tool for screening active components from the complex traditional Chinese medicine samples and evaluating their ability to chelate ferrous ions.

Direct speciation analysis of organic mercury in fish and kelp by on-line complexation and stacking using capillary electrophoresis

To determine organic mercury (Hg) species that could not be detected by ultraviolet (UV), a highly automated on-line complexation method was established, which combined with normal stacking by capillary electrophoresis-diode array detector. The approach was based on the fact that the compounds and complex reagent interacted to form hydrophilic chelates under the effect of the separation voltage, which was effectively separated and detected by UV. Key parameters, such as the type and concentration of complex reagent, separation voltage and so on were systematically investigated. Under the optimized conditions, the precision and repeatability were in the range of 0.16–3.31% and 0.17–1.21%, respectively. Furthermore, PhHg, EtHg and MeHg were effectively separated and determined in fresh fish (Silver carp) muscle and kelp (Kombu) with the recoveries of 84.63–111.39% and 75.68–114.76%, respectively. The proposed method had the advantages of easy-operating, cost-efficient, stable and reliable compared to off-line complexation method.

A powerful on line ABTS+\u2013CE-DAD method to screen and quantify major antioxidants for quality control of Shuxuening Injection

A novel method of on-line 2,2′-Azinobis-(3-ethylbenzthiazoline-6-sulphonate)-Capillary Electrophoresis-Diode Array Detector (on-line ABTS+-CE-DAD) was developed to screen the major antioxidants from complex herbal medicines. ABTS+, one of well-known oxygen free radicals was firstly integrated into the capillary. For simultaneously detecting and separating ABTS+ and chemical components of herb medicines, some conditions were optimized. The on-line ABTS+-CE-DAD method has successfully been used to screen the main antioxidants from Shuxuening injection (SI), an herbal medicines injection. Under the optimum conditions, nine ingredients of SI including clitorin, rutin, isoquercitrin, Quercetin-3-O-D-glucosyl]-(1-2)-L-rhamnoside, kaempferol-3-O-rutinoside, kaempferol-7-O-β-D-glucopyranoside, apigenin-7-O-Glucoside, quercetin-3-O-[2-O-(6-O-p-hydroxyl-E-coumaroyl)-D-glucosyl]-(1-2)-L-rhamnoside, 3-O-{2-O-[6-O-(p-hydroxyl-E-coumaroyl)-glucosyl]}-(1-2) rhamnosyl kaempfero were separated and identified as the major antioxidants. There is a linear relationship between the total amount of major antioxidants and total antioxidative activity of SI with a linear correlation coefficient of 0.9456. All the Relative standard deviations of recovery, precision and stability were below 7.5%. Based on these results, these nine ingredients could be selected as combinatorial markers to evaluate quality control of SI. It was concluded that on-line ABTS+-CE-DAD method was a simple, reliable and powerful tool to screen and quantify active ingredients for evaluating quality of herbal medicines.

Second-order capillary electrophoresis diode array detector data modeled with the Tucker3 algorithm: A novel strategy for Argentinean white wine discrimination respect to grape variety.

Data obtained by capillary electrophoresis with diode array detection (CE-DAD) were modeled with the purpose to discriminate Argentinean white wines samples produced from three grape varieties (Torrontés, Chardonnay, and Sauvignon blanc). Thirty-eight samples of commercial white wine from four wine-producing provinces of Argentina (Mendoza, San Juan, Salta, and Rio Negro) were analyzed. CE-DAD matrices with dimensions of 421 elution times (from 1.17 to 7.39 minutes) × 71 wavelengths (from 227 to 367 nm) were joined in a three way data array and decomposed by Tucker3 method under non-negativity constraint, employing 18, 18 and six factors in the modes 1, 2 and 3, respectively. Using the scores of Tucker model, it was possible to discriminate samples of Argentinean white wine by linear discriminant analysis and Kernel linear discriminant analysis. Core element analysis of the Tucker3 model allows identifying the loading profiles in spectral mode related to Argentinean white wine samples.

A Green Antioxidant Activity-Integrated Dual-Standard Method for Rapid Evaluation of the Quality of Traditional Chinese Medicine Xuebijing Injection by On-Line DPPH-CE-DAD

Much attention has been focused on treatment of sepsis which leads to high mortality all over the world in every year. Antioxidant activity seems to play a prominent role in the treatment of sepsis exhibited by Xuebijing injection. The aim of the present research was to develop an on-line 1, 1-diphenyl-2-picrylhydrazyl- (DPPH-) capillary electrophoresis-diode array detector (on-line DPPH-CE-DAD) method for rapidly assessing antioxidant properties and efficacious material basis of antioxidant activity as a way of quality control of Xuebijing injection. Several parameters affecting the separation were investigated, including the pH and concentrations of buffer, SDS, β-CD, and organic modifier as well as voltage and cassette temperature. Compared to previous traditional method, this improved method shortened the experimental cycle and became more efficient because it was successfully applied to analyze total antioxidant activity and contents of twelve antioxidants of Xuebijing injection under the same condition. The results revealed that the on-line DPPH-CE-DAD method was a reagent-saving, rapid, feasible, and green technique for quality control of Xuebijing injection in terms of pharmacological activity and contents of active ingredients. It also offered new opportunities for the analysis of antioxidant activity of complex matrix.

Combining bar adsorptive microextraction with capillary electrophoresis--application for the determination of phenolic acids in food matrices.

In this contribution, bar adsorptive microextraction coated with a mixed-mode anion exchange/RP followed by liquid desorption was combined for the first time with a capillary electrophoresis-diode array detection system (BAμE(MAX)-LD/CE-DAD), for the determination of phenolic acids in food matrices, using chlorogenic, ferulic, cumaric, and caffeic acids as model compounds. Assays performed in aqueous media spiked at the 0.8 mg/L level yielded average recoveries up to 40% for all four phenolic acids, under optimized experimental conditions. The analytical performance showed also good precision (RSD < 15%), convenient LODs (18.0-85.0 μg/L) and linear dynamic ranges (0.8-8.0 mg/L) with convenient determination coefficients (r(2) > 0.9900). By using the standard addition method, the application to food matrices such as green tea, red fruit juice, and honey allowed very good performances for the determination of minor amounts of phenolic acids. The proposed methodology proved to be a suitable alternative for the analysis of polar to ionic compounds, showing to be easy to implement, reliable, sensitive, and requiring a low sample volume to determine phenolic acids in food samples.

Screening and confirmatory analysis of glyoxylate: A biomarker of plants resistance against herbicides

The evidence that glyoxylate is a biomarker of tolerance or susceptibility to the action of herbicides belonging to the glycine family makes necessary to develop simple methods for the determination of this metabolite. Glyoxylate level allows both to know the presence/absence of members of the glycine family in plants and plant response to these herbicides. With this aim, a colorimetric-screening method has been developed for determination of glyoxylate based on formation of a phenylhydrazone, then oxidised to red coloured 1,5-diphenylformazan. Simultaneous optimization of ultrasound-assisted extraction of glyoxylate from plants and derivatization by a multivariate design has allowed the determination of the target analyte in fresh plants without interferences from pheophytines and compounds with carbonyl groups. Limits of detection and quantification are 0.05 μg ml −1 and 0.17 μg ml −1, respectively, with precision, expressed as relative standard deviation, of 3.3% for repeatability and 5.6% for the within-day laboratory reproducibility. Only 50 mg of plant is necessary for determination of glyoxylate within 32 min. Confirmatory analysis by capillary electrophoresis-diode array detection in samples of Lolium spp. subjected to treatment with glyphosate shows that the relative error of the proposed method is always lower than 7%.

Time-resolved metabolomics reveals metabolic modulation in rice foliage

BackgroundTo elucidate the interaction of dynamics among modules that constitute biological systems, comprehensive datasets obtained from "omics" technologies have been used. In recent plant metabolomics approaches, the reconstruction of metabolic correlation networks has been attempted using statistical techniques. However, the results were unsatisfactory and effective data-mining techniques that apply appropriate comprehensive datasets are needed.ResultsUsing capillary electrophoresis mass spectrometry (CE-MS) and capillary electrophoresis diode-array detection (CE-DAD), we analyzed the dynamic changes in the level of 56 basic metabolites in plant foliage (Oryza sativa L. ssp. japonica) at hourly intervals over a 24-hr period. Unsupervised clustering of comprehensive metabolic profiles using Kohonen's self-organizing map (SOM) allowed classification of the biochemical pathways activated by the light and dark cycle. The carbon and nitrogen (C/N) metabolism in both periods was also visualized as a phenotypic linkage map that connects network modules on the basis of traditional metabolic pathways rather than pairwise correlations among metabolites. The regulatory networks of C/N assimilation/dissimilation at each time point were consistent with previous works on plant metabolism. In response to environmental stress, glutathione and spermidine fluctuated synchronously with their regulatory targets. Adenine nucleosides and nicotinamide coenzymes were regulated by phosphorylation and dephosphorylation. We also demonstrated that SOM analysis was applicable to the estimation of unidentifiable metabolites in metabolome analysis. Hierarchical clustering of a correlation coefficient matrix could help identify the bottleneck enzymes that regulate metabolic networks.ConclusionOur results showed that our SOM analysis with appropriate metabolic time-courses effectively revealed the synchronous dynamics among metabolic modules and elucidated the underlying biochemical functions. The application of discrimination of unidentified metabolites and the identification of bottleneck enzymatic steps even to non-targeted comprehensive analysis promise to facilitate an understanding of large-scale interactions among components in biological systems.

Chemical Profiling of Heroin Recovered from the North Korean Merchant Vessel Pong Su

Heroin samples, seized from the North Korean merchant vessel Pong Su in Australian waters, were analyzed to determine geographic origin. Duplicate samples were analyzed by the National Measurement Institute's Australian Forensic Drug Laboratory and the United States Drug Enforcement Administration's Special Testing and Research Laboratory. Alkaloid ratios were determined by both liquid chromatography-diode array detection (LC-DAD) and capillary electrophoresis-diode array detection (CE-DAD) techniques. Acid/neutral manufacturing by-products were determined by solvent extraction followed by gas chromatography-mass spectrometry (GC-MS). Solvents, trapped in the heroin particles during manufacture, were detected by both static headspace GC-MS and purge and trap GC-MS. The alkaloid ratios obtained were consistent with heroin of a Southeast Asian (SEA) origin and principal component analysis of the alkaloid results demonstrated the presence of at least four subgroupings within the seizure. The solvent analysis detected diethyl ether and ethyl acetate, solvents typically seen in SEA heroin. However, the acid/neutral analysis revealed compounds not normally seen in heroin of a SEA origin. Furthermore, sterol-like molecules, always detected in the acid/neutral analysis of SEA heroin, were absent from the Pong Su samples. The Pong Su heroin, although similar to SEA heroin, has sufficient differences to classify it as having an unknown origin at the time of this writing.

Resolution of overlapping capillary electrophoresis peaks by using chemometric analysis: Improved quantification by using internal standard

Discussed in this paper is the application of internal standard for quantification of compounds in overlapping peaks from capillary electrophoresis diode array detection, which has not often been studied. A strategy is proposed to calculate the calibration coefficient in this case. The resolution of overlapping capillary electrophoresis peaks is achieved by using second order multivariate curve resolution method. Before resolution, the signals are baseline-corrected by automation baseline correction, in which a smoothed signal is used for both baseline recognition and modeling. An evolving routine is used to determine the peak shift and improve the repeatability of migration times. The quantification results are compared with those of generalized rank annihilation method. For multivariate curve resolution method, improved quantification precision results from using internal standard, but further research is expected in the case of generalized rank annihilation method.

Plasma creatinine and creatine quantification by capillary electrophoresis diode array detector

Traditional clinical assays for nonprotein nitrogen compounds, such as creatine and creatinine, have focused on the use of enzymes or chemical reactions that allow measurement of each analyte separately. Most of these assays are mainly directed to urine quantification, so that their applicability on plasma samples is frequently hard to perform. This work describes a simple free zone capillary electrophoresis method for the simultaneous measurement of creatinine and creatine in human plasma. The effect of analytical parameters such as concentration and pH of Tris–phosphate running buffer and cartridge temperature on resolution, migration times, peak areas, and efficiency was investigated. Good separation was achieved using a 60.2-cm × 75-μm uncoated silica capillary, 75 mmol/L Tris–phosphate buffer, pH 2.25, at 15 °C, in less than 8 min. We compared the present method to a validated capillary electrophoresis assay, by measuring plasma creatinine in 120 normal subjects. The obtained data were compared by the Passing–Bablok regression and the Bland–Altman test. Moreover the performance of the developed method was assessed by measuring creatine and creatinine in 16 volunteers prior to and after a moderate physical exercise.

Simultaneous determination of the main metabolites in rice leaves using capillary electrophoresis mass spectrometry and capillary electrophoresis diode array detection.

The study of the metabolomics of primary metabolites using conventional chemical analyses requires a high-throughput method. Chemical derivatizations are a prerequisite for gas-chromatographic separation, and a large sample quantity is needed for liquid-chromatographic separation and nuclear magnetic resonance detection systems. Recently, we have developed a capillary electrophoresis-mass spectrometry (CE-MS) technology that can simultaneously quantify a large number of primary metabolites, using only a small quantity of samples, and without any chemical derivatizations. Parallel use of a capillary electrophoresis-diode array detector (CE-DAD) system further enables almost all water-soluble intracellular metabolites to be analyzed. We demonstrate, with rice leaves, a simple and rapid method of sample preparation for CE analysis; using this method, we have successfully measured the levels of 88 main metabolites involved in glycolysis, the tricarboxylic acid cycle, the pentose phosphate pathway, photorespiration, and amino acid biosynthesis.

Dynamic coating for fast and reproducible determination of basic drugs by capillary electrophoresis with diode-array detection and mass spectrometry

The double coating principle of CEofix ® buffers was evaluated for the analysis of some basic drugs by capillary electrophoresis–diode-array detection (CE–DAD) and capillary electrophoresis–mass spectrometry (CE–MS). The involatile phosphate present in original low pH CEofix ®, was replaced with formic acid for hyphenation of CE with MS. The double coating produces a substantial and highly reproducible electroosmotic flow (EOF), even at low pH. The rinsing procedure and electrolyte composition were optimized for both CE–DAD and CE–MS. The system was evaluated with the analysis of a mixture of basic drugs and a spiked urine sample enriched by solid-phase extraction (SPE). The R.S.D. values on the migration time and peak area measured for 28 analyses with CE–DAD were below 0.25 and 2.40%, respectively. For CE–MS, the R.S.D. on the migration time was 0.85% or less and the area precision ranged from 5.65 to 14.33% (for seven injections). The LOD with the developed CE–MS method was below 50 ppb for all five drug standards tested.

Capillary electrophoresis-diode array detection--electrospray mass spectrometry for the analysis of selected tropane alkaloids in plant extracts.

Capillary zone electrophoresis, coupled to UV and interfaced with electrospray ionization mass spectrometry (ESI-MS), is described for the simultaneous analysis of hyoscyamine and scopolamine. On-line UV detection occurred at 22 cm from the inlet of the capillary and ESI-MS monitoring was performed along the entire length of the capillary (85 cm). An alkaline solution of 40 mM ammonium acetate at pH 8.5 was suitable for the analysis of the alkaloids under consideration. Under the optimized conditions, including CE and ESI-MS parameters, the two alkaloids were resolved within a short time and with very high sensitivity. The differentiation of hyoscyamine and its positional isomer littorine, commonly encountered in plant material, is also presented using up-front collision-induced dissociation. Finally, the developed method was applied to the analysis of these alkaloids in Belladonna leaf extract and in Datura candida x D. aurea hairy root extract.