Canopy Surface Research Articles

Combining the uncombinable: corporate memories, ethnobiological observations, oceanographic and ecological data to enhance climatic resilience in small-scale fisheries

The global food production system is increasingly strained by abrupt and unpredictable weather events, which hinder communities' ability to adapt to climate variations. Despite advances in meteorological predictions, many communities lack the academic knowledge or infrastructure to interpret these complex models. This gap highlights the need for solutions that make climate forecasts more accessible and actionable, especially for communities reliant on natural resources. This study explores the potential of enhancing seasonal climate forecasts by integrating local ecological knowledge (LEK) with scientific data. Specifically, we combined ethnobiological information gathered between 2022 and 2024 with existing oceanographic and ecological data to create an ethnobiological calendar for four fishing cooperatives. An ethnographic approach was used to understand the population's ethnobiological knowledge and their perceptions of marine heatwaves and climate change impacts. Coastal monitoring data was collected using moorings that recorded temperature over a 14-year period (2010–2024). To characterize giant kelp dynamics, we used an existing dataset of multispectral Landsat images, which estimates the surface canopy biomass of giant kelp forests. Ecological monitoring was conducted annually every summer from 2006 to 2023 to record the in situ abundance of ecologically and economically important invertebrate and fish species. Combining oceanographic, ecological, and ethnographic data, allowed for alligning fishers' observations with recorded marine heatwave events and ecological shifts. Our findings revealed that these observations closely matched documented marine heatwave data and corresponding ecological changes. The integration of LEK with scientific oceanographic data can significantly improved our understanding of dynamic climate regimes, offering contextually relevant information that enhances the reliability and utility of seasonal climate forecasts. By incorporating yearly data into an ethnobiological calendar, we promote more inclusive, community-based approaches to environmental management, advocating for the integration of LEK in climate adaptation efforts, emphasizing its crucial role in strengthening resilience strategies against climatic shocks.

Comparative analysis of FAO dual Kc, Priestley‐Taylor and flux variance similarity methods in partitioning evapotranspiration from flood‐irrigated rice fields

AbstractAccurate quantification of evapotranspiration (ET) and its bifurcation into productive transpiration (T) and unproductive evaporation (E) are essential for the successful implementation of sustainable irrigation practices. This study compares the performances of three distinct methods for partitioning ET into E and T fluxes from flood‐irrigated rice fields. These methods include: i) the FAO dual Kc‐ETo model, which utilizes Penman–Monteith (PM) estimates of reference ET and crop‐specific scaling factors; ii) the Priestley‐Taylor (PT) method, which relies on radiation‐driven energy balance at the canopy surface; and iii) the flux variance similarity (FVS) method, which utilizes high‐frequency eddy covariance (EC) measurements of carbon and water vapour fluxes. Meteorological, phenological and hydrological parameters were monitored over two winter seasons in a paddy field, replicating site‐specific management strategies. The cumulative ETs obtained from the PM, PT and FVS methods were 445 mm, 300 mm and 356 mm, respectively, for season 1 and 428 mm, 321 mm and 375 mm, respectively, for season 2. The accuracy of the ET estimation and partition methods was assessed against independent measurements of ET and E using a lysimeter and a microlysimeter. The results demonstrated that the EC‐based FVS method offers superior accuracy in both quantifying (R2 = 0.67, RMSE = 0.70 mm) and partitioning (R2 = 0.51, RMSE = 0.76 mm) ET fluxes, followed by the PM‐based FAO dual Kc‐ETo and PT methods. Evaporation accounted for 29 ± 5% of consumptive water use, highlighting an opportunity for the implementation of water‐saving strategies, particularly during vegetative and transplantation stages. The findings of the path analysis indicate that vegetative and radiation factors influence ET variation, while meteorological and soil factors significantly impact T variation.

A comparative analysis of dendrometric, macromorphological, and micromorphological characteristics of Pistacia atlantica subsp. atlantica and Pistacia terebinthus in the middle Atlas region of Morocco.

The genus Pistacia, with its species having notable ecological, economic, and medicinal implications, demonstrates remarkable environmental adaptability. The central objective of the study is to analyze interspecific variations between Pistacia atlantica subsp. atlantica and Pistacia terebinthus across three distinct bioclimatic zones in the Middle Atlas region of Morocco. The methodology includes collecting dendrometric measurements and conducting macromorphological examinations on these two taxa, with a detailed analysis of 27 qualitative and quantitative variables. A micro-morphological analysis of leaves, using scanning electron microscopy (SEM), is employed to explore specific features such as size and stomatal density, as well as qualitative aspects like epidermal cell shape and trichomes. Dendrometric measurements have revealed that the canopy surface and the number of trunks per tree can serve as distinctive features between the two species. Regarding the sex ratio of Pistacia atlantica subsp. atlantica, 59% of the examined trees are males, primarily associated with the jujube tree in arid zones and the dwarf palm in humid areas. In contrast, female Pistacia terebinthus exhibit a similar percentage, predominantly associated with oak groves and cade juniper in their distribution areas. Principal component analysis of biometric measurements emphasized a significant disparity between the two species, representing 60.25% of the total variance. The use of SEM unveiled new features facilitating the identification of the two species. By leveraging the macromorphological and micromorphological variability of pistachio trees, we can qualify those best suited to diverse bioclimates. In this regard, we suggest incorporating them into reforestation and rehabilitation programs aimed at restoring our declining ecosystems.

MONTPEL: A multi-component Penman-Monteith energy balance model

Mechanistic modelling is gradually replacing empiricism in crop models, focusing on leaf-level physiological processes. This shift necessitates simulating crop surface temperature at infra-canopy sub-daily scales but many crop models still rely on empirical formulations for canopy temperature estimation, typically on a daily basis. We developed MONTPEL, a multi-component Penman-Monteith model that allows simulating the crop energy balance with flexible canopy representations (“BigLeaf” vs. “Layered”, “Lumped” vs. “Sunlit-Shaded”) and accounts for atmospheric stability conditions. We analyzed the model behavior, sensitivity and accuracy, using measurements from four wheat (Triticum aestivum L.) experiments conducted under varying pedoclimatic and water stress conditions. Measurements included hourly energy balance terms (total net radiation, soil heat flux, sensible and latent energy fluxes), hourly temperature of the canopy surface or of leaves at different depths inside the canopy, and sunlit and shaded leaf temperatures around solar noon at different dates. MONTPEL reproduced the measured energy balance terms with a root mean square error (RMSE) between 21 and 87 Wm-2 and a coefficient of determination (R²) exceeding 0.65. The model's accuracy in simulating canopy temperature, with RMSE ≤ 2.2 °C and R² ≥ 0.92, remained consistent regardless of measurement scale. Adjusting the aerodynamic resistance for atmospheric stability minimized simulated canopy temperature errors, notably in semi-arid conditions. Crop latent energy flux and temperature were most sensitive to the maximal stomatal conductance (gs,max) parameter. However, using a single gs,max value across the simulated experiments yielded satisfactory results, suggesting a weak sensitivity to the temporal and site-to-site variability of gs,max. Distinguishing sunlit from shaded canopy fractions systematically resulted in lower latent energy fluxes compared to “Lumped” canopy representation results. Analysis identified limitations in the multi-component approach, particularly an unrealistic uniform temperature shift across leaf layers when soil surface temperature changes.

Native arbuscular mycorrhizal fungi drive ecophysiology through phenotypic integration and functional plasticity under the Sonoran desert conditions.

Knowledge is scarce to what extent environmental drivers and native symbiotic fungi in soil induce abrupt (short-term), systemic (multiple traits), or specific (a subset of traits) shifts in C3 plants' ecophysiological/mycorrhizal responses. We cultivated an emblematic native C3 species (Capsicum annuum var. glabriusculum, "Chiltepín") to look at how the extreme heat of the Sonoran desert, sunlight regimes (low = 2, intermediate = 15, high = 46 mol m2 d-1) and density of native arbuscular mycorrhizal fungi in soil (low AMF = 1% v/v, high AMF = 100% v/v), drive shifts on mycorrhizal responses through multiple functional traits (106 traits). The warming thresholds were relentlessly harsh even under intensive shade (e.g. superheat maximum thresholds reached ranged between 47-63°C), and several pivotal traits were synergistically driven by AMF (e.g. photosynthetic capacity, biomass gain/allometry, and mycorrhizal colonization traits); whereas concurrently, sunlight regimes promoted most (76%) alterations in functional acclimation traits in the short-term and opposite directions (e.g. survival, phenology, photosynthetic, carbon/nitrogen economy). Multidimensional reduction analysis suggests that the AMF promotes a synergistic impact on plants' phenotypic integration and functional plasticity in response to sunlight regimes; however, complex relationships among traits suggest that phenotypic variation determines the robustness degree of ecophysiological/mycorrhizal phenotypes between/within environments. Photosynthetic canopy surface expansion, Rubisco activity, photosynthetic nitrogen allocation, carbon gain, and differential colonization traits could be central to plants' overall ecophysiological/mycorrhizal fitness strengthening. In conclusion, we found evidence that a strong combined effect among environmental factors in which AMF are key effectors could drive important trade-offs on plants' ecophysiological/mycorrhizal fitness in the short term.

A machine-learning enabled digital-twin framework for next generation precision agriculture and forestry

This work utilizes the modern synergy between flexible, rapid, simulations and quick assimilation of data in order to develop next-generation tools for precise biomass management of large-scale agricultural and forestry systems. Additionally, when integrated with satellite and drone-based digital elevation technologies, the results lead to digital replicas of physical systems, or so-called digital-twins, which offer a powerful framework by which to optimally manage agricultural and forestry assets. Specifically, this enables the investigation of inverse problems seeking to ascertain ideal parameter combinations, such as the number of plants/trees, plant/tree spacing, light intensity, water availability, soil resources, available planting surface area, initial seedling size, genetic variation, etc. to obtain optimal system performance. Towards this goal, a digital-twin framework is developed, consisting of a rapid computational physics engine to simulate an agricultural installation, containing thousands of growing, interacting, plants/trees. This model is then driven by a machine-learning algorithm to obtain optimal parameter sets that match observed statistical representations of a time series of growing agricultural canopy surfaces, measured by digital elevation models. Model simulations are provided to illustrate the approach and to show how such a tool can be used for large-scale biomass management.

Design and Experiment of Ordinary Tea Profiling Harvesting Device Based on Light Detection and Ranging Perception

Due to the complex shape of the tea tree canopy and the large undulation of a tea garden terrain, the quality of fresh tea leaves harvested by existing tea harvesting machines is poor. This study proposed a tea canopy surface profiling method based on 2D LiDAR perception and investigated the extraction and fitting methods of canopy point clouds. Meanwhile, a tea profiling harvester prototype was developed and field tests were conducted. The tea profiling harvesting device adopted a scheme of sectional arrangement of multiple groups of profiling tea harvesting units, and each unit sensed the height information of its own bottom canopy area through 2D LiDAR. A cross-platform communication network was established, enabling point cloud fitting of tea plant surfaces and accurate estimation of cutter profiling height through the RANSAC algorithm. Additionally, a sensing control system with multiple execution units was developed using rapid control prototype technology. The results of field tests showed that the bud leaf integrity rate was 84.64%, the impurity rate was 5.94%, the missing collection rate was 0.30%, and the missing harvesting rate was 0.68%. Furthermore, 89.57% of the harvested tea could be processed into commercial tea, with 88.34% consisting of young tea shoots with one bud and three leaves or fewer. All of these results demonstrated that the proposed device effectively meets the technical standards for machine-harvested tea and the requirements of standard tea processing techniques. Moreover, compared to other commercial tea harvesters, the proposed tea profiling harvesting device demonstrated improved performance in harvesting fresh tea leaves.

Geometric Modeling of Umbrella Surfaces

In this study, we present a novel method for modeling the canopy surface of an umbrella. Our approach involves representing the area between the ribs on the canopy as a trimmed bilinear patch. Furthermore, we conduct an in-depth exploration of various differential geometric properties of the umbrella surface. We introduce a method for unfolding the canopy surface onto a plane, which serves as a valuable technique for fabricating a cardboard template to accurately cut canopy fabrics. To validate the effectiveness of our geometric modeling method, we apply it to several umbrella models, showcasing its practical application and benefits.

Dynamic changes in evapotranspiration, canopy photosynthesis and expansive growth in open field under rapid fluctuating radiation

In open fields, plants experience dynamic changes in environment, particularly radiation, temperature, wind, and humidity but their short-term responses have not been adequately characterized under natural conditions. In this study, we assessed causal effects of rapid radiation fluctuation on seven plant parameters in open fields of cotton and sweet corn canopies. The parameters are evapotranspiration (ET), canopy photosynthesis indicated by CO2 flux from air to canopy (FCO2), sensible heat energy flux (H), canopy conductance for water vapor (gcw), canopy surface temperature (Ts), shoot and leaf elongation rate, and stem diameter change. The energy and CO2 fluxes were measured with Bowen ratio/energy balance/CO2 gradient (BREB+) technique, using averaging time of 5 min. Shoot + leaf elongation and stem diameter change were monitored with position transducers using averaging time of 1 min. All parameters were all found to respond to change in radiation and transpiration within minutes or sooner. While radiation effects on canopy gas exchanges are expected, illuminating are the indirect but immediate effects on shoot + leaf growth and stem diameter change through radiation effects on transpiration and plant water status. A novel finding is that gcw also responded within minutes or sooner to radiation fluctuations and that FCO2 was related almost linearly to gcw. Results are discussed in terms of soil-plant-atmosphere continuum, and interpreted in terms of dynamic interactions between transpiration and plant water status. The clear inverse relationship between ET and elongation rate or stem diameter changes provides additional evidence supporting the validity of 5-min averaging for the BREB + technique.

The influence of surface canopy water on L-band backscatter from corn: A study combining detailed In situ data and the Tor Vergata radiative transfer model

The presence, duration, and amount of surface canopy water (SCW) is important in microwave remote sensing for agricultural applications. Our current understanding of the effect of SCW on total backscatter and the underlying mechanisms is limited. The aim of this study is to investigate the effect of SCW on backscatter as a function of frequency and polarization, and to understand the underlying mechanisms. For this purpose, the radiative transfer model developed at the Tor Vergata University was used to simulate the total backscatter at L-, C-, and X-band. First, simulations from the standard Tor Vergata model were compared to L-band observations. Then, two additional implementations of the model were developed to account for the effect of SCW and the presence of water on the soil surface on radar backscatter. Representing SCW by the inclusion of additional water in the vegetation leads to an increase in vegetation volume scattering and a reduction in the contribution from double bounce and direct scattering from the ground. This increases total backscatter, particularly at lower frequencies. Results suggest that the difference between backscatter in the presence and absence of SCW can be up to around 2.5 dB in L-band and likely less at higher frequencies. The effect of water on the canopy (SCW) reaches its maximum during the mid and late season as the crop reached its maximum biomass. The influence of dew on the reflectivity of the soil surface resulted in a difference of up to 3.8 dB between backscatter in the presence and absence of SCW. In particular, at low frequencies and low vegetation cover, the presence of water on the soil surface needs to be taken into account to correctly capture the sub-daily dynamics in backscatter. The findings of this study are relevant for current and future SAR missions including Sentinel-1, ROSE-L, NISAR, SAOCOM, ALOS, CosmoSkyMed, TerraSAR-X, TanDEM-X and constellations such as those of ICEYE, and Capella which have dawn/dusk overpasses or multiple overpasses per day.

Short wave attenuation by a kelp forest canopy

AbstractGiant kelp (Macrocystis pyrifera) forests are common along the California coast. Attached on the rocky bottom at depths of approximately 5–25 m, the kelp, when mature, spans the water column and develops dense, buoyant canopies that interact with waves and currents. We present two novel results based on observations of surface gravity waves in a kelp forest in Point Loma, California. First, we report short wave (1–3 s) attenuation in kelp, quantified by an exponential decay coefficient —comparable to the dampening effect of sea ice. Second, we identify seasonal and tidal changes in attenuation, peaking mid‐summer with maximum kelp cover, and during low tide when a greater proportion of the fronds are at the surface. Thus, the naturally occurring surface canopies of kelp forests can act as temporally varying, high‐frequency filters of wave energy.

Heat Transfer Process of the Tea Plant under the Action of Air Disturbance Frost Protection

Wind machines based on the air disturbance method are progressively employed to mitigate frost damage within the agricultural machinery frost protection. These devices are utilized during radiative frost nights to disrupt near-surface thermal inversion through air mixing. Despite this application, the fundamental mechanisms underlying these mixing processes are not well comprehended. In this research, numerical simulations were conducted using COMSOL Multiphysics software version 6.0 to simulate the flow and heat transfer processes between the thermal airflow and both the tea canopy and stems. The results indicated that due to obstruction from the canopy cross-section, the airflow velocity on the contact surface rapidly increased. As the airflow further progressed, the high-speed region of the airflow gradually approached the canopy surface. Turbulent kinetic energy increased initially on the windward side of the canopy cross-section and near the top interface. On the windward side of the canopy, due to the initial impact of the thermal airflow, rapid heating occurred, resulting in a noticeable temperature difference between the windward and leeward sides within a short period. In the interaction between airflow and stems, with increasing airflow velocity, fluctuations and the shedding of wake occurred on the leeward side of the stems. The maximum sensible heat flux at the windward vertex of the stem increased significantly with airflow velocity. At an airflow velocity of 2.0 m/s, the maximum heat flux value was 2.37 times that of an airflow velocity of 1.0 m/s. This research utilized simulation methods to study the interaction between airflow and tea canopy and stems in frost protection, laying the foundation for further research on the energy distribution in tea ecosystem under the disturbance of airflow for frost protection.

Variations in water economy traits in two Sphagnum species across their distribution boundaries.

We assessed changes in traits associated with water economy across climatic gradients in the ecologically similar peat mosses Sphagnum cuspidatum and Sphagnum lindbergii. These species have parapatric distributions in Europe and have similar niches in bogs. Sphagnum species of bogs are closely related, with a large degree of microhabitat niche overlap between many species that can be functionally very similar. Despite this, ecologically similar species do have different distributional ranges along climatic gradients that partly overlap. These gradients may favor particular Sphagnum traits, especially in relation to water economy, which can be hypothesized to drive species divergence by character displacement. We investigated traits relevant for water economy of two parapatric bryophytes (Sphagnum cuspidatum and S. lindbergii) across the border of their distributional limits. We included both shoot traits and canopy traits, i.e., collective traits of the moss surface, quantified by photogrammetry. The two species are ecologically similar and occur at similar positions along the hydrological gradient in bogs. The biggest differences between the species were expressed in the variations of their canopy surfaces, particularly surface roughness and in the responses of important traits such as capitulum mass to climate. We did not find support for character displacement, because traits were not more dissimilar in sympatric than in allopatric populations. Our results suggest that parapatry within Sphagnum can be understood from just a few climatic variables and that climatic factors are stronger drivers than competition behind trait variation within these species of Sphagnum.

The role of environmental gradients and microclimates in structuring communities and functional groups of lizards in a rainforest-savanna transition area.

Environmental heterogeneity poses a significant influence on the functional characteristics of species and communities at local scales. Environmental transition zones, such as at the savanna-forest borders, can act as regions of ecological tension when subjected to sharp variations in the microclimate. For ectothermic organisms, such as lizards, environmental temperatures directly influence physiological capabilities, and some species use different thermoregulation strategies that produce varied responses to local climatic conditions, which in turn affect species occurrence and community dynamics. In the context of global warming, these various strategies confer different types of vulnerability as well as risks of extinction. To assess the vulnerability of a species and understand the relationships between environmental variations, thermal tolerance of a species and community structure, lizard communities in forest-savanna transition areas of two national parks in the southwestern Amazon were sampled and their thermal functional traits were characterized. Then, we investigated how community structure and functional thermal variation were shaped by two environmental predictors (i.e., microclimates estimated locally and vegetation structure estimated from remote sensing). It was found that the community structure was more strongly predicted by the canopy surface reflectance values obtained via remote sensing than by microclimate variables. Environmental temperatures were not the most important factor affecting the occurrence of species, and the variations in ecothermal traits demonstrated a pattern within the taxonomic hierarchy at the family level. This pattern may indicate a tendency for evolutionary history to indirectly influence these functional features. Considering the estimates of the thermal tolerance range and warming tolerance, thermoconformer lizards are likely to be more vulnerable and at greater risk of extinction due to global warming than thermoregulators. The latter, more associated with open environments, seem to take advantage of their lower vulnerability and occur in both habitat types across the transition, potentially out-competing and further increasing the risk of extinction and vulnerability of forest-adapted thermoconformer lizards in these transitional areas.

Individual Tree-Level Monitoring of Pest Infestation Combining Airborne Thermal Imagery and Light Detection and Ranging

The infestation of pine shoot beetles (Tomicus spp.) in the forests of Southwestern China has inflicted serious ecological damages to the environment, causing significant economic losses. Therefore, accurate and practical approaches to detect pest infestation have become an urgent necessity to mitigate these harmful consequences. In this study, we explored the efficiency of thermal infrared (TIR) technology in capturing changes in canopy surface temperature (CST) and monitoring forest health at the scale of individual tree crowns. We combined data collected from TIR imagery and light detection and ranging (LiDAR) using unmanned airborne vehicles (UAVs) to estimate the shoot damage ratio (SDR), which is a representative parameter of the damage degree caused by forest infestation. We compared multiple machine learning methods for data analysis, including random forest (RF), partial least squares regression (PLSR), and support vector machine (SVM), to determine the optimal regression model for assessing SDR at the crown scale. Our findings showed that a combination of LiDAR metrics and CST presents the highest accuracy in estimating SDR using the RF model (R2 = 0.7914, RMSE = 15.5685). Our method enables the accurate remote monitoring of forest health and is expected to provide a novel approach for controlling pest infestation, minimizing the associated damages caused.

Crown die-back of peri-urban forests after combined heatwave and drought was species-specific, size-dependent, and also related to tree neighbourhood characteristics

The Rhine River valley of Germany has been facing recurrent and intense spells of drought and heatwaves threatening the health of trees in peri-urban forests. Crown damage intensified by climate change accelerates tree mortality, threatening its ecological, economic, and social benefits; however, the pattern of crown die-back in peri-urban forests remained unclear. We performed a field inventory to estimate the crown die-back of 2578 trees of 51 species from 68 randomly selected peri-urban forest plots in Karlsruhe region on the right bank of the Rhine, after the catastrophic summer heatwave and drought of 2018. We related crown die-back to species-specific drought tolerance, wood anatomical traits, tree size, canopy surface temperature, tree density, Shannon's diversity and Gini coefficient for tree height. Regression results indicate that small-size trees were found to be more susceptible to canopy damage than large trees, with a 1-meter increase in tree height associated with a 0.8 % reduction in crown die-back. This size-dependent process is also species-specific. Among the 12 species with significant (p < 0.05) linear relationship between height and die-back, 9 species demonstrated negative correlations and 3 species showed positive relationships. Species tolerant to drought or cavitation (e.g., trees with diffuse porous xylem, 21 species) had significantly lower crown dieback. For example, with a 1-point-scale increase in drought tolerance crown die-back declined 14.35 %. Trees that experienced high canopy surface temperature and grew with high tree density and species diversity (Shannon's diversity) had more crown die-back. However, high structural diversity (Gini coefficient) was related to lower crown die-back. Our results suggested that future research should focus more on tree species-specific hydraulic and thermal traits and tree density and structure management to improve tree health and species selection in peri-urban forests under future climate change.

Validation of Two Newly Developed Albedo Schemes Based on the Observations Over the Region With Evergreen Broadleaved Forest in Southern China

AbstractExisting land surface models still have large error in the simulation of surface albedo. At present, introducing the influence of meteorological factors into the albedo parameterization scheme is an effective way to improve the albedo simulation. However, the improvement of the vegetation canopy surface albedo parameterization scheme is still insufficient. Therefore, based on the radiation and meteorological observation data during 1 November 2015–30 April 2018 from a land‐atmosphere interaction observation tower in a typical secondary evergreen broadleaved forest in Southern China, this study firstly analyzed the influencing factors of canopy surface albedo. It was found that the solar elevation angle and air relative humidity are two key factors influencing the canopy surface albedo, and the impact of the solar elevation angle on canopy surface albedo is not exactly the same on diurnal and seasonal scales. Then, two new canopy surface albedo parameterization schemes of additive form and multiplicative form were proposed and introduced into CLM5 model for single point simulation. Results show that the adoption of newly developed canopy surface albedo parameterization schemes can improve the simulation of diurnal and seasonal variations of albedo and reduce the overestimation of the simulation of near‐infrared radiation albedo and visible radiation albedo in the CLM5 model, then significantly reduce the root mean square errors of reflected solar radiation and net radiation simulation.

No evidence for fractal scaling in canopy surfaces across a diverse range of forest types

Abstract Canopy structural complexity is a key emergent property of forest ecosystems that directly relates to their ability to store carbon, cycle water and nutrients, and provide habitat for biodiversity. However, we lack a general framework for quantifying the structural complexity of forest canopies, and it remains to be seen if there are simple rules that explain the huge variation in canopy structure that we observe across the world's forests. A leading candidate for characterizing differences in structural complexity among forest ecosystems are fractal scaling laws, or measures of statistical self‐similarity. If forest canopies were fractal in nature, their structural attributes could be distilled into a single coefficient—their fractal dimension—which could then be used to directly compare structural differences within and across biomes. To test this idea, we used airborne laser scanning (ALS) data acquired across nine landscapes in Australia that span a huge environmental gradient and include everything from dry shrublands, tropical savannas, dense rainforests, to 90 m tall Mountain Ash forests. Using the ALS data, we built high‐resolution 3D canopy height models of each landscape so that we could quantify how closely they followed fractal scaling laws, based on a comprehensive set of fractal dimension estimators. Across all ecosystem types, fractal scaling assumptions were consistently violated, with clear and systematic differences between real‐world forest canopies and simulated fractal surfaces. However, deviations from fractality did vary predictably among sites, with forests in less arid environments, dominated by tall trees with large crowns, exhibiting a higher degree of self‐similarity across scales. Synthesis: Our study conclusively shows that canopy surfaces are not fractal beyond the scale of individual tree crowns. Nevertheless, we still observed ecologically meaningful and generalisable patterns in forest structure across scales, which closely reflect biophysical and physiological constraints on tree size and architecture. These patterns point the way towards a more general framework for characterizing ecological complexity.

Micrometeorological Comparison of Canopy Temperature between Two Wheat Cultivars Grown under Irrigation in a Hot Environment in Sudan

A thorough exploration of the micrometeorological aspects influencing canopy temperature in contrasting wheat cultivars can unveil the specific mechanisms of adaptation to heat stress. However, information on wheat microclimates in hot environments for crop improvement is lacking. Here, we used a micrometeorological method to investigate wheat’s response to high temperatures. Field experiments were conducted in the Gezira Scheme, Sudan, to compare two high-yielding heat-tolerant cultivars, Imam and Bohaine, in terms of canopy temperature depression (CTD), air temperature gradient (ATG), and vapor pressure gradient (VPG) from a 2 m height to canopy level. The maximum air temperature at 2 m during the main growing season was 37 °C. Air temperature at canopy level was mostly lower in the Imam field than in the Bohaine field, and it was positively correlated with and higher than radiometric canopy surface temperature. The maximum CTD during the reproductive stage was 4.7–6.5 °C in the Bohaine field and 5.0–7.2 °C in the Imam field. ATG was also larger in the Imam field, attributed to the greater leaf area of the Imam canopy, as presumed from the NDVI difference between fields. ATG was negatively correlated with VPG in both fields, and the relationship was stronger at lower nighttime wind speeds and weaker at higher daytime wind speeds. These results indicate that the micrometeorological approach can be used to compare cultivars in high-temperature environments.

Hypothesis and theory: Do trees “release the tension” in rainwater? Surface tension reduction in throughfall and stemflow from urban trees

Knowledge of the processes and impacts associated with the canopy’s partitioning of rainfall into stemflow (water that drains to the base of tree stems) and throughfall (water that drips through gaps and from canopy surfaces) has expanded in recent years. However, the effect of canopy interactions on the fundamental physical properties of rainwater as it travels through the canopy to the soil, particularly surface tension, remains understudied. To discuss specific hypotheses within this context and their relevance to ecohydrological theory, the surface tension of rainwater samples was examined directly. Over a period of 9 months, open rainwater, throughfall and stemflow samples were collected during 20 storms from 12 study trees located in Secrest Arboretum (about 2.5 km outside Wooster, Ohio). Study trees were selected to highlight a range of canopy characteristics, with each tree being from a unique deciduous species. Surface tension was measured using pendant drop goniometry, and measurements were analyzed for variation across study trees and correlation with event air temperature and rain intensity. In general, surface tension was reduced in throughfall and stemflow compared to measurements made for event rainwater, with median surface tension changes of −0.446 mN m−1 and −0.595 mN m−1 for throughfall and stemflow, respectively. The extent of this reduction varied among study trees (with changes as great as −6.5 to −5.5 mN m−1), and storm event characteristics were directly and indirectly correlated with surface tension changes in select cases. Hypothetically, a number of mechanisms may account for the observed reduction (and variation in this reduction) in surface tension, including differences in tree surface properties, canopy microenvironments, and microbiomes, and each warrant further research. Testing these hypotheses may advance broader ecohydrological theory as surface tension changes will influence wetting, absorption, and solute exchange processes within the canopy which, in turn, may affect related surface processes.