Canalis Sinuosus Research Articles

Visualization features of canalis sinuosus with cone beam computed tomography.

One of the key stages of evaluating an edentulous ridge prior to dental implant placement is the analysis of neighboring anatomical structures such as canalis sinuosus (CS) with cone-beam computed tomography (CBCT). CBCT visualization has its own features, such as the change of slice thickness. The aim of the study was to analyze CS prevalence in relation to the slice thickness and CS diameter according to CBCT scans. In total, 100 CBCT scans of 39 males and 61 females in the age span of 46 to 81 years were retrospectively studied. Terminal alveolar part of CS was analyzed in Ez3D2009 (Vatech) software on panoramic and cross-sectional views with 0.5 mm, 1 mm, 3 mm, and 10 mm slice thicknesses. The prevalence was documented with regard to the diameter and slice thickness and was statistically compared in age and gender groups. This CBCT study demonstrated 55.5% CS prevalence. There was no statistically significant difference in presence between age and gender groups regarding diameter as well as within different slice thickness. The study also showed the importance of the slice thickness choice for CS visualization: the best visualization was reached with 0.5 mm and 1 mm slice thicknesses. Visualization with 0.5 mm and 1 mm slice thicknesses was absolutely the same (55.5%). General CS prevalence with a 10 mm slice thickness (16.5%) was significantly lower (P < 0.05) than the prevalence with a 3 mm slice thickness (20.5%). The correlation between the slice thickness and a diameter more than 1.5 mm in size was not found. CBCT analysis showed that the highest CS prevalence was detected with the use of 0.5/1 mm slice thickness. As well, the higher CS diameter, the better is its visualization.

Cone Beam Computed Tomography Analysis of Canalis Sinuosus in Association with an Osteolytic Lesion of Maxilla: A Case Report and Review of Literature

Cone Beam Computed Tomography Analysis of Canalis Sinuosus in Association with an Osteolytic Lesion of Maxilla: A Case Report and Review of Literature

Anterior Palatal A&amp;ccedil;ıklığı Olan Canalis Sinuosus Varyasyonları

Anterior Palatal A&amp;ccedil;ıklığı Olan Canalis Sinuosus Varyasyonları

Pathosis or Additional Maxillary Neurovascular Channel? A Case Report

This case report highlights an incidental finding of an anatomic variation of a neurovascular channel in close proximity to the maxillary right permanent lateral incisor (tooth #7). A 32-year-old patient presented with discomfort and a history of trauma in childhood to the right maxillary central incisor (tooth #8). A periapical radiograph of tooth #8 revealed an incidental finding of a radiolucent area in the apical one third of the right maxillary lateral incisor (tooth #7) root with the appearance of inflammatory apical root resorption. A cone-beam computed tomographic scan taken to assess the suspected area of resorption revealed this to be a neurovascular channel within the bone passing distal to the apex of tooth #7, which has been superimposed over the root of tooth #7 on the periapical radiograph. This case report highlights that additional bone channels are a common finding in the maxillary alveolus. These channels can in fact be the canalis sinuosus (or branches of it), a bone channel that is a frequent anatomic variant arising from the infraorbital canal. The canalis sinuosus has been reported rarely in the literature, but it should be considered to be a potentially common finding in the maxillary incisal region. Clinicians are made aware of the presence of additional neurovascular bone channels such as the canalis sinuosus when interpreting radiographs for assessing periapical status of teeth and for surgical planning in the anterior maxilla.

Canalis sinuosus mimicking root resorption lesion

Anatomical variations in the premaxillary region, especially those involving neurovascular structures, can present a diagnostic challenge to a clinician. Correct diagnosis is crucial for treatment decision-making and prognosis assessment of nonsurgical and surgical procedures. Canalis sinuosus (CS) is an anatomical variation of the anterior superior alveolar nerve canal. Its diagnosis may sometimes be confusing, resulting in an inadequate treatment plan. Described is a case of a CS mimicking an external root resorption lesion. Cone beam computed tomography (CBCT) assisted in confirming the final diagnosis.

Combined anatomical variations: The mylohyoid bridge, retromolar canal and accessory palatine canals branched from the canalis sinuosus

The study of anatomical variations is important not only for collecting anthropometric data, but also for improving clinical protocols and understanding why a particular clinical procedure sometimes does not yield the expected results. We report the case of a 74 year-old patient, in which we observed combined anatomical variants of the mandible and maxillary bone. One of these was the unilateral mylohyoid bridge (MB) of the uncommon, lingular type. This MB extended posteriorly to the spine of Spix, over the sulcus colli behind the spine. It thus formed a common mandibular canal (MC) which further divided into a retromolar canal and the MC proper. This combination of variants in the mandible has not, to our knowledge, previously been reported, at least in studies using cone beam computed tomography (CBCT). Additionally we found multiple accessory canals (ACs) deriving from the canalis sinuosus, which opened opposite to each frontal tooth, presumably carrying either dental fibers of the palatine nerves, or palatine fibers of the anterior superior alveolar nerve. Although the ACs in the anterior palate are well established anatomical variants, the MB appears in publications rather as an anthropological identifier. However, when present, it can impede anaesthesia of the lower teeth and thus deserves to be included in anatomical descriptions. The evaluation of patients in CBCT should observe the anatomical features on a case-by-case basis and it also provide data for studies of MB prevalence in large numbers of patients.

Evaluation of the morphology of the canalis sinuosus using cone-beam computed tomography in patients with maxillary impacted canines.

PurposeThe nasopalatine canal is a well-known, important anatomical structure in the anterior maxilla, but this region contains many accessory canals. The canalis sinuosus (CS) is one of these canals; it contains the anterior superior alveolar nerve, along with veins and arteries. The purpose of this study was to evaluate the CS using conebeam computed tomography (CBCT) in patients with maxillary impacted canines.Materials and MethodsA total of 111 patients admitted to the Istanbul Medipol University School of Dentistry for the exposure, orthodontic treatment, and/or extraction of an impacted canine were included in this study. CBCT images were obtained for these patients under standard conditions. Axial, coronal, and sagittal sections were evaluated to assess the prevalence of CS, the direction and diameter of the canal, its relation with the impacted canine, and its distance from the alveolar crest. Further, possible correlations with patient gender and age were analyzed.ResultsThe CS could be detected bilaterally in all the evaluated tomography images. The mean canal diameter was significantly larger in males than in females (P=.001). The CS ran significantly closer to the impacted canine when the canal was located horizontally (P=.03). Variations of the canal, such as accessory canals, were identified in 6 patients.ConclusionCS is an anatomical entity that may resemble periapical lesions and other anatomical structures. Evaluation with CBCT prior to surgical procedures in the anterior maxilla will help to prevent overlooking such anatomical structures and to decrease possible surgical complications.

Assessment of accessory canals of the canalis sinuosus: a study of 1000 cone beam computed tomography examinations

The aim of this study was to verify the presence, spatial location, and calibre of the accessory canals (AC) of the canalis sinuosus by cone beam computed tomography, and their relationship to the anterior maxilla. This retrospective analysis included the scans of 1000 subjects. Parameters registered were sex, age, number of AC, presence or absence of AC with a diameter <1.0mm, AC diameter (only for AC with a diameter >1.0mm), and AC location in relation to the adjacent teeth. Males showed a statistically higher frequency of AC than females. The difference in age distribution was not statistically significant. Twenty percent of all AC presented a diameter of a least 1.0mm. The end of the AC trajectory was most frequently located palatal to the anterior maxillary teeth. All relationships analyzed here were very weak (age vs. number of AC, age vs. AC diameter, number of AC vs. sex). Overall, the results of this study showed that AC of the canalis sinuosus are a common anatomical structure in the anterior maxilla, regardless of age and sex.

Location and classification of Canalis sinuosus for cone beam computed tomography: avoiding misdiagnosis.

The aim of this study was to assess the presence, location and, multiplanar distance of the canalis sinuosus (CS) between the incisive foramen and the anterior maxillary alveolar ridge using cone beam computed tomography (CBCT). Therefore, 500 CBCT maxillary images obtained from male and female patients aged 20 to 80 years were selected to assist in the dental treatment. Low-quality tomographic images were discarded. All images were captured with the i-CATTM Classic tomograph and assessed using the XoranCatTM software. The axial sections were analyzed at the incisive foramen in order to verify the CS presence in laterality and location. Furthermore, linear measurements of the nasal cavity floor, buccal cortical bone, and alveolar ridge crest were made. All the collected data were statistically analyzed. Results show a variation of the CS in relation to the classification and distance of anatomical structures, but no significant difference between the right and left sides. It should be highlighted that CBCT is necessary before invasive procedures in order to preserve important anatomical structures. In conclusion, the location of the CS varies in relation to the alveolar ridge crest and buccal cortical bone, assuming that it is going to be located by the upper lateral incisor palatine.

Canalis Sinuosus and radiographic procedures in the region of anterior maxilla

The Canalis Sinuosus (CS) is known as an anatomical variation of anterior superior alveolar nerve being a neurovascular bundle. Frequently, the anterior maxillary region receives surgical interventions of different specialties. The knowledge concerning anatomical structures in this region, is crucial to reach predictable and safe surgical procedures. The overlapping of anatomical structures in conventional imaging examinations have a limit in observing neurovascular canal, such as the CS. Thus, Cone Beam Computed Tomography (CBCT) images may give a great support in preoperative planning, since it allows the three-dimensional reconstruction of the anatomical details of its structures. In this report, the author describes an implant rehabilitation that may have possibly injured the anterior superior alveolar nerve.

Anterior superior alveolar nerve (ASAN).

The anterior superior alveolar nerve (ASAN) is a branch of the infraorbital nerve. Only few studies have morphometrically evaluated the course of the ASAN. Midfacial segments of ten hemisectioned fresh adult cadaver heads were dissected to uncover the anterior wall of the maxilla. Specimens were subsequently decalcified and the bone overlying the ASAN was removed under a microscope to expose the ASAN. Its branching pattern from the infraorbital nerve was recorded, and the course of the ASAN within the anterior wall of the maxillary sinus was morphometrically assessed measuring distances to predefined landmarks using a digital caliper. A distinct ASAN was observed in all specimens. It arose lateral (six cases) or inferior (four cases) from the infraorbital nerve. The point of origin was located at a mean distance of 12.2 ± 5.79 mm posterior to the infraorbital foramen. The ASAN was located on average 2.8 ± 5.13 mm lateral to the infraorbital foramen. After coursing medially, the ASAN ran inferior to the foramen at a mean distance of 5.5 ± 3.07 mm. When approaching the nasal aperture, the loop of the ASAN was on average 13.6 ± 3.07 mm above the nasal floor. The horizontal mean distance from the ASAN to the nasal aperture was 4.3 ± 2.74 mm halfway down from the loop, and 3.3 ± 2.60 mm at the floor of the nose, respectively. In conclusion, the present study evaluated the course of the ASAN relative to the infraorbital foramen and nasal aperture. This information is helpful to avoid damage to this anatomical structure during interventions in the infraobrital region of the maxilla. Further, knowledge of the course of the ASAN and of its bony correlate (canalis sinuosus) may be valuable in interpreting anesthetic or radiologic findings in the anterior maxilla.

Posttraumatic Midface Pain: Clinical Significance of the Anterior Superior Alveolar Nerve and Canalis Sinuosus.

Posttraumatic midface pain secondary to injury of the anterior superior alveolar nerve (ASAN) is characterized as pain localized to the central and lateral incisors, canines, and maxilla. This nerve is susceptible to injury and subsequent formation of neuromas after midface trauma. Surgical intervention requires an accurate and precise understanding of the course of the ASAN. Dissections of 12 human cadaver heads were conducted to identify the course of the ASAN through the canalis sinuosus (CS). Fifty 1-mm slice face computed tomographic scans were evaluated to document the dimensions and course of the CS. The ASAN branched laterally from the infraorbital nerve before reaching the infraorbital rim in all cadavers. The bifurcation occurred 18 mm posterior to the infraorbital rim (range, 10-30 mm). At a point 25 mm inferior to the infraorbital rim, the ASAN is found 3.4 mm lateral to the piriform aperture (range, 3-4 mm). Radiographic analysis demonstrated a 12.9-mm horizontal length of the CS across the anterior maxilla (SD, 2.2 mm), a distance of 4.8 mm between the piriform aperture and the CS (SD, 1.2 mm), and 11.7 mm vertical length of the CS along the piriform aperture (SD, 3.0 mm). The ASAN maintains consistent coordinates at specific points along its course through the midface. An improved understanding of the course of the ASAN will guide future diagnosis of injury to this nerve and surgical intervention for patients with posttraumatic midface pain secondary to ASAN injury.

Well-Defined Radiolucent Lesion and a Rare Anatomical Variation Bilateral Canalis Sinuosus in the Maxilla and Role of Cbct in Diagnosis

Well-Defined Radiolucent Lesion and a Rare Anatomical Variation Bilateral Canalis Sinuosus in the Maxilla and Role of Cbct in Diagnosis

Anatomical study of the canalis sinuosus in 100 cone beam computed tomography examinations.

To identify and describe the morphology and location of the canalis sinuosus (CS) and make correlations with gender, age, and distance of this canal to important adjacent structures on the region, thus mapping the anatomy of this structure. A total of 100 cone beam computed tomography (CBCT) examinations were collected from the files of a dental clinic in the Municipality of Belém, Pará, Brazil, and analyzed to identify the site of bifurcation, the diameter of CS right after such bifurcation and in its terminal portion as well as the direction of its course and the distance to the alveolar bone crest region. The anatomical views were evaluated using InVivoDental software on sagittal, axial, and coronal sections, and the results were submitted to Fisher's exact test, Kendall correlation coefficients, Mann-Whitney tests, and T tests. CS was present in 88% of the sample. There were no statistically significant changes in the presence of CS regarding gender, age and direction of course. A strong positive correlation between CS's diameter on its initial and terminal portions was observed (p < 0.0001). There was a statistically significant change in the distance to alveolar bone crest related to gender, which is higher in men (p = 0.0303). In the sample, CS was frequent and similar in both genders, with course distance to the alveolar bone crest and termination in different locations that ought to be analyzed on CBCT prior to surgical procedures.

Assessment of bone channels other than the nasopalatine canal in the anterior maxilla using limited cone beam computed tomography

The anterior maxilla, sometimes also called premaxilla, is an area frequently requiring surgical interventions. The objective of this observational study was to identify and assess accessory bone channels other than the nasopalatine canal in the anterior maxilla using limited cone beam computed tomography (CBCT). A total of 176 cases fulfilled the inclusion criteria comprising region of interest, quality of CBCT image, and absence of pathologic lesions or retained teeth. Any bone canal with a minimum diameter of 1.00 mm other than the nasopalatine canal was analyzed regarding size, location, and course, as well as patient gender and age. A total of 67 accessory canals ≥1.00 mm were found in 49 patients (27.8%). A higher frequency of accessory canals was observed in males (33.0%) than in females (22.7%) (p = 0.130). Accessory canals occurred more frequently in older rather than younger patients (p = 0.115). The mean diameter of accessory canals was 1.31 ± 0.26 mm (range 1.01-2.13 mm). Gender and age did not significantly influence the diameter. Accessory canals were found palatal to all anterior teeth, but most frequently palatal to the central incisors. In 56.7%, the accessory canals curved superolaterally and communicated with the ipsilateral alveolar extension of the canalis sinuosus. The study confirms the presence of bone channels within the anterior maxilla other than the nasopalatine canal. More than half of these accessory bone canals communicated with the canalis sinuosus. From a clinical perspective, studies are needed to determine the content of these accessory canals.

Neurovascular anatomical variations in the anterior palate observed on CBCT images

This study aimed to assess the presence of additional foramina and canals in the anterior palate region, through cone beam computed tomography (CBCT) images, describing their location, direction, and diameter. CBCT exams of 178 subjects displaying the anterior maxilla were included and the following parameters were registered: gender; age group; presence of additional foramina in the anterior palate (AFP) with at least 1mm in diameter; location and diameter of AFP; and direction of bony canals associated with AFP. Twenty-eight patients (15.7%) presented AFP and in total 34 additional foramina were registered. No statistical differences between patients with or without AFP were found for gender or age. The average diameter of AFP was 1.4mm (range from 1 to 1.9mm). Their location was variable, with most of the cases occurring in the alveolar process near the incisors or canines (n=27). In 18 cases, AFP was associated with bony canals with upward or oblique direction toward the anterior nasal cavity floor. In 14 cases, the canal presented as a direct extension of the canalis sinuosus, in an upward direction laterally to the nasal cavity aperture. In two cases, the canal was observed adjacent to the incisive and joined the nasopalatine canal superiorly. CBCT images have a crucial role in the recognition of anatomical variations by allowing detailed tridimensional evaluations. Additional foramina and canals in the anterior region of the upper jaw are relatively frequent. Practitioners should be aware and trained to identify these variations. Over 15% of the population studied had additional foramina in the anterior palate, between 1mm and 1.9mm wide, with variable locations. In most cases the canals associated with these foramina either presented as a direct extension of the canalis sinuosus, or coursed towards the nasal cavity floor.

Canalis sinuosus: a rare anatomical variation

The infraorbital canal issues a small branch on its lateral face close to its midpoint to allow passage of the anterior superior alveolar nerve. This small canal, sometimes called the canalis sinuosus, runs forward and downward to the inferior wall of the orbit, lateral to the infraorbital canal and medially bent to the anterior wall of the maxillary sinus, passing below the infraorbital foramen. Anatomical variations in the maxilla are rarely described in the literature and, in most cases, are related to the nasopalatine canal. This article describes a rare anatomical variation of the presence of a bilateral accessory canal extending from the nasal cavity lateral wall to an accessory foramen located on the hard palate, adjacent to the maxillary lateral incisor observed in cone beam computed tomography (CBCT) images. This case is an anatomical variation of the anterior superior alveolar nerve (canalis sinuosus). Identification of individual anatomical variations, especially on CBCT, may help the surgeon to avoid injuries to nerves during implant placement.