Calcium Silicate Cement Research Articles

New Bioactive Calcium Silicate Cement Mineral Trioxide Aggregate Repair High Plasticity (MTA HP)-A Systematic Review.

Bioactive calcium silicate cement Mineral Trioxide Aggregate (MTA) has been used for years as a gold standard in intravital pulp treatment and specialist endodontic procedures. Owing to flaws of the material, the manufacturers have been trying to enhance and produce materials showing improved physical, chemical and biological parameters. One of the new calcium-silicate cements based on mineral trioxide aggregate, however without some flaws exhibited by the cement, is Mineral Trioxide Aggregate Repair High Plasticity (MTA HP). The aim of the present paper was a systematic literature review concerning the MTA HP material used nowadays in dentistry, as a review of its specific features. The present paper is the first article providing a systematic literature review on MTA HP. The aim of the present article is the better understanding of MTA HP properties, which can aid the decision-making process in endodontic treatment.

Calcium silicate and calcium aluminate cements for dentistry reviewed

AbstractCalcium silicate cements were identified as excellent materials for dentistry, particularly for dental procedures contacting the dental pulp or root system. Both calcium silicate and calcium aluminate cements cause the biomineralization (precipitation of hydroxyapatite [HA] phenomena and shield dental tissues from the underlying cement (a foreign body material). The cements also elute ions to stimulate cytokines that contribute to the healing of the dental pulp or in the tissue surrounding the root of a tooth. The cements serve as a foundation for other dental restorative materials. This paper reviews the cement phases, properties, in vivo reactions, and clinical benefits from the use of calcium silicate and calcium aluminate ceramic cements.

The management of deep caries in UK primary care: A nationwide questionnaire-based study.

To investigate current approaches and attitudes towards the management of deep caries in primary dental care within the United Kingdom (UK). Open distribution of an electronic questionnaire survey was undertaken to primary care dental professionals working in publicly funded National Health Service [NHS], privately funded, military and community dental services. Demographic variables investigated included the following: place of qualification, method of remuneration, level of restorative training, materials available, years qualified, appointment length and clinician type. Management variables focussed on case-based scenarios. Univariate analyses of responses to questions were undertaken using χ2 tests with sequential Bonferroni correction. Variables with a statistical relationship of p≤.2 were selected for binary logistic regression modelling. A total of 657 responses were received. Practitioners with formal postgraduate qualifications (PGQ) were more likely (OR, 95%CI) to undertake further tests to aid diagnosis including: gaining a patient history (1.80, 1.01-3.20), periapical radiography (1.43, 1.01-2.03), cold pulp testing (2.079, 1.46-2.97) and electric pulp testing (1.65, 1.02-2.65). Rubber dam was infrequently used for deep caries management (29.2%). Non-NHS practitioners were much more likely to use rubber dam (3.40, 2.15-5.37), as were those that had completed PGQ (2.24, 1.48-3.38). Non-selective caries removal was used in deep caries by 41.4% of practitioners. Indirect pulp caps were carried out by 56.7% of practitioners. NHS practitioners were more likely to place calcium hydroxide (3.74, 1.97-7.15), whilst non-NHS practitioners were more likely to place calcium silicate cements (CSCs) (3.303, 1.71-6.38) as were non-UK graduates (5.63, 2.47-12.86) and those with PGQ (2.12, 1.17-3.87). This UK survey highlights significant variation in the management of deep caries. There is lack of consensus regarding the use of a standard systematic approach to diagnosing disease, with a reliance on history and tests with poor specificity. Non-selective caries removal for managing deep carious lesions remains common, with low rubber dam compliance underlining a lack of asepsis. Notably, a significant number of practitioners placed indirect pulp caps, but CSCs and GIC were not commonly used. At present, although clear guidelines are available this is not translating into consistent management approaches in practice, suggesting that better dissemination of current treatments is essential to undergraduate and postgraduate groups.

Analyzing the Basic Properties and Environmental Footprint Reduction Effects of Highly Sulfated Calcium Silicate Cement

In South Korea, efforts to reduce carbon dioxide emissions and environmental impacts from the perspective of life cycle assessment (LCA) are important because of the implementation of zero-energy building certification for public buildings and the promotion of net-zero policy. Therefore, it is critical to develop cement alternatives with low embodied energy and less environmental impact. In this study, the applicability of “highly sulfated calcium silicate cement (HSCSC),” an eco-friendly binder developed by our research team, was investigated. Its basic properties and environmental footprint reduction effects were examined in comparison with ordinary Portland cement (OPC) and Portland blast furnace slag cement (PBSC). The environmental impacts of the HSCSC were analyzed using the LCA method. The results confirmed that HSCSC can be considered an excellent alternative to conventional OPC or PBSC in certain areas as an eco-friendly binder that can reduce carbon dioxide emissions and environmental impacts. Moreover, compared to OPC and PBSC, the probability of HSCSC affecting the human body is extremely low. The results of this study may contribute to the development and practical use of cements that minimize climate impacts, as well as improve the efficacy of future research on embodied energy saving.

Vital Pulp Therapy in Permanent Mature Posterior Teeth with Symptomatic Irreversible Pulpitis: A Systematic Review of Treatment Outcomes.

Background and Objectives: Symptomatic irreversible pulpitis in permanent mature teeth is a common indication for nonsurgical root canal treatment (NSRCT), but contemporary studies have reported on vital pulp therapy (VPT) applied in such teeth as a less invasive treatment. This systematic review assessed the outcomes of VPT, including partial and full pulpotomy performed with hydraulic calcium silicate cements (HCSCs) in permanent mature posterior teeth diagnosed with symptomatic irreversible pulpitis. Materials and Methods: The PRISMA guidelines were followed. The search strategy included PubMed®, EMBASE, Cochrane library and grey literature electronic databases. The quality assessment of the identified studies followed the Cochrane Collaboration Risk of Bias, ROBINS-I and Newcastle–Ottawa Scale tools. Results: The search of primary databases identified 142 articles, of which 9 randomized controlled trials and 3 prospective cohort studies were selected for review. The risk-of-bias was assessed as ‘high’ or ‘serious’, ‘fair’, and ‘low’ for three, seven and two articles, respectively. One to five years after VPT using HCSCs, the success rates mostly ranged from 78 to 90%. Based on two articles, the outcomes of the VPT and NSRCT were comparable at one and five years. Despite the necessity for the intra-operative pulp assessment in VPT procedures, the majority of the studies did not fully report on this step or on the time needed to achieve hemostasis. Small sample sizes, of under 23 teeth, were reported in three studies. Conclusions: The reviewed 12 articles reported favorable outcomes of the VPT performed with HCSCs in permanent mature posterior teeth with symptomatic irreversible pulpitis, with radiographic success in the range of 81 to 90%. Two articles suggested comparable outcomes of the VPT and root canal treatment. Universal case selection and outcome criteria needs to be established for VPT when considered as an alternative to NSRCT. This evidence supports the need for further research comparing longer-term outcomes of both of the treatment modalities.

Effect of Calcium Silicate Cements on Vascular Endothelial Growth Factor Release from Platelet-rich Fibrin and its Architectural Changes

Effect of Calcium Silicate Cements on Vascular Endothelial Growth Factor Release from Platelet-rich Fibrin and its Architectural Changes

Biomaterial and Biofilm Interactions with the Pulp-Dentin Complex-on-a-Chip

Calcium silicate cements (CSCs) are the choice materials for vital pulp therapy because of their bioactive properties, promotion of pulp repair, and dentin bridge formation. Despite the significant progress made in understanding CSCs’ mechanisms of action, the key events that characterize the early interplay between CSC-dentin-pulp are still poorly understood. To address this gap, a microfluidic device, the “tooth-on-a-chip,” which was developed to emulate the biomaterial-dentin-pulp interface, was used to test 1) the effect of CSCs (ProRoot, Biodentine, and TheraCal) on the viability and proliferation of human dental pulp stem cells, 2) variations of pH, and 3) release within the pulp chamber of transforming growth factor–β (TGFβ) as a surrogate of the bioactive dentin matrix molecules. ProRoot significantly increased the extraction of TGFβ (P < 0.05) within 24 to 72 h and, along with Biodentine, induced higher cell proliferation (P > 0.05), while TheraCal decreased cell viability and provoked atypical changes in cell morphology. No correlation between TGFβ levels and pH was observed. Further, we established a biofilm of Streptococcus mutans on-chip to model the biomaterial-biofilm-dentin interface and conducted a live and dead assay to test the antimicrobial capability of ProRoot in real time. In conclusion, the device allows for direct characterization of the interaction of bioactive dental materials with the dentin-pulp complex on a model of restored tooth while enabling assessment of antibiofilm properties at the interface in real time that was previously unattainable.

Tissue reaction to novel customized calcium silicate cement based dental implants. A pilot study in the dog

ObjectivesThe purpose of this study was to determine the level of periodontal tissue regeneration in a canine model following post-extraction placement of an implant molded from a composite material made from extracted tooth dentin and a calcium silicate cement (CSC) material. The investigation used autologous dentin in conjunction with a CSC material to form a composite implant designed for immediate tooth replacement.MethodsTwo (2) beagles had a periodontal and radiographic examination performed to rule out any pre-treatment inflammation, significant periodontal disease, or mobility. Then, ination eleven (11) teeth were extracted and polyvinyl siloxane molds were made to fabricate three different types of implants: Particulate Implant (Test Group 1, n = 4), Shell Implant Alone (Test Group 2, n = 2), Shell Implant with Emdogain® (Test Group 3, n = 3). Teeth in the control group were extracted, scaled (n = 2), and then re-implanted into their respective fresh extraction sockets. At 4 weeks, a clinical, radiographic, and histologic assessment was performed.ResultsClinical evaluation revealed no mobility in any of the test or control implants and no radiographic evidence of significant bone loss or active disease. Based on the MicroCT analysis, direct bone to implant contact was observed in some areas with an apparent periodontal ligament space. Implant-related inflammation, on average, was similar among all groups, with low numbers of infiltrates. Implant-related inflammatory reaction was generally minimal and not interpreted to be adverse.ConclusionThe proposed novel composite materials revealed that not only do these materials demonstrate high biocompatibility, but also their successful integration in the alveolus is likely secondary to a partial ligamentous attachment. The current investigation may lead to the use of calcium silicate-based materials as custom dental implants. Further research on this novel composite’s biomechanical properties is necessary to develop the optimal material composition for use as a load-bearing dental implant.

The Effect of Calcium-Silicate Cements on Reparative Dentinogenesis Following Direct Pulp Capping on Animal Models.

Dental pulp vitality is a desideratum for preserving the health and functionality of the tooth. In certain clinical situations that lead to pulp exposure, bioactive agents are used in direct pulp-capping procedures to stimulate the dentin-pulp complex and activate reparative dentinogenesis. Hydraulic calcium-silicate cements, derived from Portland cement, can induce the formation of a new dentin bridge at the interface between the biomaterial and the dental pulp. Odontoblasts are molecularly activated, and, if necessary, undifferentiated stem cells in the dental pulp can differentiate into odontoblasts. An extensive review of literature was conducted on MedLine/PubMed database to evaluate the histological outcomes of direct pulp capping with hydraulic calcium-silicate cements performed on animal models. Overall, irrespective of their physico-chemical properties and the molecular mechanisms involved in pulp healing, the effects of cements on tertiary dentin formation and pulp vitality preservation were positive. Histological examinations showed different degrees of dental pulp inflammatory response and complete/incomplete dentin bridge formation during the pulp healing process at different follow-up periods. Calcium silicate materials have the ability to induce reparative dentinogenesis when applied over exposed pulps, with different behaviors, as related to the animal model used, pulpal inflammatory responses, and quality of dentin bridges.

Experimental resin-modified calcium-silicate cement containing N-(2-hydroxyethyl) acrylamide monomer for pulp tissue engineering

AimOur study aimed to measure (1) the flexural strength, (2) shear bond strength to dentin, (3) pH, and (4) calcium (Ca) release of a series of innovative resin-modified calcium-silicate pulp-capping cements (Rm-CSCs). Using an ex-vivo human vital tooth-culture model, we additionally assessed (5) their pulp-healing initiation when brought in direct contact with human dental pulp tissue. MethodologyThree experimental Rm-CSCs, being referred to ‘Exp_HEAA’, ‘Exp_GDM’ and ‘Exp_HEAA/GDM’, contained either 20 wt% N-(2-hydroxyethyl) acrylamide (HEAA), 20 wt% glycerol dimethacrylate (GDM) or 10 wt% HEAA plus 10 wt% GDM, added to a common base composition consisting of 25 wt% urethane dimethacrylate (UDMA), 10 wt% 4-methacryloxyethyl trimellitate anhydride (4-MET), and 5 wt% N,N'-{[(2-acrylamido-2-[(3-acrylamidopropoxy)methyl] propane-1,3-diyl)bis(oxy)]bis-(propane-1,3-diyl)}diacrylamide (FAM-401). As Ca source and radiopacifier, 37 wt% tricalcium silicate powder (TCS) and 3 wt% zirconium oxide (ZrO 2) were respectively added. ResultsAll three experimental Rm-CSCs revealed a significantly higher flexural strength and shear bond strength to dentin (p < 0.05) than the commercial reference Rm-CSC TheraCal LC (Bisco). Exp_HEAA presented with a significantly higher Ca release and pH at 24 h compared with the other Rm-CSCs (p < 0.05). At 1 week, the Ca release and pH of Exp_HEAA and Exp_HEAA/GDM was significantly higher than those of Exp_GDM and TheraCal LC (p < 0.05). Using the ex-vivo human vital tooth culture model, Exp_HEAA revealed pulp-healing initiation capacity as documented by nestin and collagen-I expression. ConclusionsDepending on the formulation, the innovative Rm-CSCs performed favorably for primary properties of relevance regarding pulp capping, this more specifically in terms of flexural strength, bond strength to dentin, as well as alkaline pH and Ca release. However, only Exp_HEAA revealed pulp-healing initiation in direct contact with human dental pulp tissue in the ex-vivo human vital tooth-culture model. This promising outcome for Exp_HEAA should be attributed to the combined use of (1) a novel hydrophilic acrylamide monomer, enabling sufficient polymerization while maintaining adequate hydrophilicity, with (2) the functional monomer 4-MET, possessing chemical bonding potential to dentin, and (3) tricalcium silicate powder to achieve an alkaline pH and to release Ca in a sufficient and controlled way.

Physicochemical and Biological Properties of Mg-Doped Calcium Silicate Endodontic Cement.

Calcium silicate-based cement has been widely used for endodontic repair. However, it has a long setting time and needs to shorten setting time. This study investigated the effects of magnesium (Mg) ion on the setting reaction, mechanical properties, and biological properties of calcium silicate cement (CSC). Sol-gel route was used to synthesize Mg ion-doped calcium silicate cement. Synthesized cement was formulated with the addition of different contents of Mg ion, according to 0, 1, 3, 5 mol% of Mg ion-doped calcium silicate. The synthesized cements were characterized with X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FT-IR), and scanning electron microscopy (SEM). We also evaluated the physicochemical and biological properties of cement, such as the setting time, compressive strength, micro-hardness, simulated body fluid (SBF) immersion, cytotoxicity, and cell differentiation tests. As a result, the Mg ion improves the hydration properties of calcium silicate cement, and the setting time is reduced by increasing the amounts of Mg ion. However, the mechanical properties deteriorated with increasing Mg ion, and 1 and 3 mol% Mg-doped calcium silicate had appropriate mechanical properties. Also, the results of biological properties such as cytotoxicity, ALP activity, and ARS staining improved with Mg ion. Consequently, the optimal condition is 3 mol% of Mg ion-doped calcium silicate (3%Mg-CSC).

The physical-mechanical properties and biocompatibility of Biodentine: A review

Aim BiodentineTM is a calcium-silicate based material that has been studied in recent years for a wide range of clinical applications in both Endodontics (pulp capping, pulpotomy, apexification, retrograde root end filling, repairing of root perforations and resorptions) and in Restorative Dentistry as a dentin substitute. The aim of this study was to review the physical-mechanical properties (porosity, setting time, compressive strength, bond strength/push-out bond strength, sealing ability, marginal adaptation, radiopacity, solubility, color stability) and biological properties (antimicrobial activity, biocompatibility, bioactivity) of BiodentineTM (BD). Materials and methods BD has been analysed in its various physico-chemical aspects and mechanical and biological properties. Results Regarding biocompatibility, bioactivity, antibacterial properties, versatility, stability, sealing properties, compressive and flexural strength, BD fulfils the requirements. Its relatively easy handling, low cost and faster setting are the major advantages of this material when compared to previous calcium silicate cements. Conclusion Clinical studies of long term efficiency and high evidence are still lacking. BD has great potential to revolutionise the management in Restorative Dentistry and Endodontics, but also in Paediatric Dentistry, both for primary and permanent dentition.

Minimal Intervention in Dentistry: A Literature Review on Biodentine as a Bioactive Pulp Capping Material.

Root canal treatment has been the treatment of choice for carious pulp exposures. In the perspective of minimally invasive dentistry and preventive endodontics, a direct pulp capping procedure with a reliable bioactive material may be considered an alternative approach provided that the pulp status is favorable. However, the treatment of pulp exposure by pulp capping is still a controversial issue with no clear literature available on this topic, leaving the concerned practitioner more confused than satisfied. Biodentine is a relatively new bioactive material explored for vital pulp therapy procedures. This article discusses its role in direct pulp capping procedures. A thorough literature search of the database was done using PubMed, Google Scholar, and Scopus using the keywords preventive endodontics, calcium silicate cement, direct pulp capping, Biodentine, and vital pulp therapy. Reference mining of the articles that were identified was used to locate other papers and enrich the findings. No limits were imposed on the year of publication, but only articles in English were considered. This paper is aimed at reviewing the current literature on Biodentine as a direct pulp capping material. The review will provide a better understanding of Biodentine's properties and can aid in the decision-making process for maintaining the vitality of exposed dental pulp with minimal intervention.

Histological Evaluation of Periradicular Tissue Inflammatory Reactions and Calcified Tissue Formations After Implantation of Experimental Calcium Silicate and Hydroxyapatite Based Nanostructural Cements Into Root Canals of Rabbits Teeth

Abstract The aim of the study was to evaluate inflammatory tissue reactions and the formation of calcified tissue after implantation of experimental nanostructured calcium silicate cement (CS) and hydroxyapatite with calcium silicate cement (HA-CS) into root canals of rabbits’ teeth. The study was conducted on four rabbits of the genus Oryctolagus cuniculus. After instrumentation and irrigation, the root canals of the central incisors were dried and filled with CS, HA-CS and control material (MTA Angelus). The animals were sacrificed after 28 days. After histological preparation and hematoxylin-eosin staining, tissue samples were evaluated for the intensity and extension of inflammatory tissue reaction; continuity, morphology and thickness of the newly formed calcified tissue; and presence of giant cells, materials particles and microorganisms. Kruskal Wallis and Dunn’s post hoc test were used for data analysis (α=0.05). There were no significant differences in the intensity of inflammatory reactions between CS, HA-CS and MTA control. HA-CS showed significantly better results than MTA and CS with respect to continuity of the newly formed calcified tissue (P=0.003 and P=0.010, respectively). Significant differences in thickness of the calcified tissue existed between CS and MTA (P=0.004) and between HA-CS and MTA (P=0.012). Application of CS and HA-CS resulted in minimal inflammatory tissue response, similar to the MTA control. CS and HA-CS were more efficient than MTA in supporting hard tissue formation. The best organized newly formed calcified tissue was seen after HA-CS application.

Evaluation of the mechanical properties and biocompatibility of gypsum-containing calcium silicate cements.

Mineral trioxide aggregate (MTA) cement is widely used in the field of endodontic treatment. We herein synthesized calcium silicates from calcium carbonate and silicon dioxide, with the aim of reducing the cost associated with the MTA. Additionally, we prepared gypsum-containing calcium silicate cement to reduce the setting time while enhancing the mechanical strength. We evaluated the physical properties of this cement and investigated the response of human dental pulp stem cells (hDPSCs) grown in culture media containing cement eluate. Our results revealed that calcium silicates could be easily synthesized in lab-scale. Furthermore, we demonstrate that gypsum addition helps shorten the setting time while increasing the compressive strength of dental cements. The synthesized gypsum-containing calcium silicate cement showed minimal cytotoxicity and did not inhibit the proliferation of hDPSCs. These results suggested that the newly developed calcium silicate material could be a promising pulp capping material.

A matched irrigation and obturation strategy for root canal therapy

In root canal therapy, irrigating solutions are employed to eliminate the bacterial load and also prepare dentin for sealer interaction. The aim of this research was to assess how irrigating solutions employed on their own or in sequence affected the tooth structure. The best way to prepare the tooth for obturation using hydraulic calcium silicate cement (HCSC) sealers and gutta-percha, thus guiding clinicians on a matched irrigation-obturation strategy for optimized root canal treatment was investigated. The effect of irrigating solutions on dentine was investigated by assessing changes in dentin microhardness, ultrastructure and mineral content, organic/inorganic matter, surface roughness and Young’s modulus. The interaction of four root canal sealers with the dentin was analysed by assessing the changes in microhardness of the dentin after sealer placement and also the sealer to dentin interface by scanning electron and confocal laser microscopy. The irrigating solutions damaged the dentin irreversibly both when used on their own and in combination. The best sequence involved sodium hypochlorite followed by chelator and a final rinse with sodium hypochlorite and obturation using HCSC sealers that enabled the restoration of dentin properties. The HCSC sealers did not rely on chelator irrigating solutions for a good material adaptation to dentin.

Calcium Silicate Cements vs. Epoxy Resin Based Cements: Narrative Review

In recent years, calcium silicate cements have been introduced. The purpose of this study is to analyze the main differences between calcium silicate-based cements and epoxy resin-based cements, analyzing the scientific literature of the last year to highlight the main advantages for predictable clinical use. Data collected from the included studies were used in order to analyze different features: chemical-physical properties, cytotoxicity and cell migration, inflammatory response, mineralizing and osteogenic activity, ion release and the filling efficiency of root canals. The calcium silicate cements analyzed in these studies showed good biological and mechanical properties compared to conventional resin-based cements, resulting in better biocompatibility and less cytotoxicity; long-term studies are needed, but these cements have ideal characteristics to allow efficient filling of root canals.

Preserving pulp vitality: part two - vital pulp therapies.

Vital pulp therapies (VPTs) aim to preserve the vitality of the pulp. The European Society of Endodontology have begun a campaign to raise awareness on the efficacy of VPTs following on from the publication of their 2019 position statement, aimed at both specialists and general dental practitioners. This review examines the current evidence surrounding VPTs and provides a rational approach to the management of the exposed pulp with the aid of case studies. Success lies in accurate diagnosis and case selection, along with well-executed treatment and appropriate follow-up protocols. The introduction of calcium silicate cements has made these treatments more predictable.

A Randomized Split Mouth Clinical Trial Comparing Mineral Trioxide Aggregate with a New Fast-setting Calcium Silicate Cement in Direct Pulp Capping of Primary Molars: A Preliminary Report from a Long-term Follow-up.

[This retracts the article on p. 390 in vol. 13, PMID: 33149412.].

Pull-Out Bond Strength of Titanium Post Cemented with Novel Fast-Setting Calcium Silicate Cement.

Objective:The aim of this study was to compare the pull-out bond strength of prefabricated titanium posts cemented with novel fast-setting calcium silicate, zinc phosphate, or glass ionomer cements.Methods:Sixty extracted human maxillary incisors were selected and received root canal treatment. Post space was prepared for titanium ParaPost XP size 5 (diameter=1.25 mm). The posts were cemented using novel calcium silicate cement, zinc phosphate cement, or glass ionomer cement (n=20). Specimens were stored in phosphate-buffered saline for 4 weeks. Subsequently, the posts were subjected to axial tensile force until bond failure. Data were analyzed by one-way ANOVA followed by multiple comparisons.Results:The posts cemented with novel calcium silicate cement (10.5±3.8 MPa) demonstrated significantly higher bond strength than zinc phosphate (8.0±2.6 MPa) and glass ionomer cements (8.0±2.7 MPa) (P<0.05).Conclusion:Within the limitation of the study, the pull-out bond strength of titanium post cemented with novel calcium silicate cement in endodontically treated teeth was superior to zinc phosphate and glass ionomer cements.