Calcium-ion Batteries Research Articles

A DFT Study of Band-Gap Tuning in 2D Black Phosphorus via Li+, Na+, Mg2+, and Ca2+ Ions.

Black phosphorus (BP) and its two-dimensional derivative (2D-BP) have garnered significant attention as promising anode materials for electrochemical energy storage devices, including next-generation fast-charging batteries. However, the interactions between BP and light metal ions, as well as how these interactions influence BP's electronic properties, remain poorly understood. Here, we employed density functional theory (DFT) to investigate the effects of monovalent (Li+ and Na+) and divalent (Mg2+ and Ca2+) ions on the valence electronic structure of 2D-BP. Molecular orbital analysis revealed that the adsorption of divalent cations can significantly reduce the band gap, suggesting an enhancement in charge transfer rates. In contrast, the adsorption of monovalent cations had minimal impact on the band gap, suggesting the preservation of 2D-BP's intrinsic electrical properties. Energetic and charge analyses indicated that the extent of charge transfer primarily governs the ability of ions to modulate 2D-BP's electronic structure, especially under high-pressure conditions where ions are in close proximity to the 2D-BP surface. Moreover, charge polarization calculations revealed that, compared with monovalent cations, divalent cations induced greater polarization, disrupting the symmetry of the pristine 2D-BP and further influencing its electronic characteristics. These findings provide a molecular-level understanding of how ion interactions influence 2D-BP's electronic properties during ion-intercalation processes, where ions are in close proximity to the 2D-BP surface. Moreover, the calculated diffusion barrier results revealed the potential of 2D-BP as an effective anode material for lithium-ion, sodium-ion, and magnesium-ion batteries, though its performance may be limited for calcium-ion batteries. By extending our understanding of interactions between ions and 2D-BP, this work contributes to the design of efficient and reliable energy storage technologies, particularly for the next-generation fast-charging batteries.

The Development and Prospect of Stable Polyanion Compound Cathodes in LIBs and Promising Complementers.

Cathode materials are usually the key to determining battery capacity, suitable cathode materials are an important prerequisite to meet the needs of large-scale energy storage systems in the future. Polyanionic compounds have significant advantages in metal ion storage, such as high operating voltage, excellent structural stability, safety, low cost, and environmental friendliness, and can be excellent cathode options for rechargeable metal-ion batteries. Although some polyanionic compounds have been commercialized, there are still some shortcomings in electronic conductivity, reversible specific capacity, and rate performance, which obviously limits the development of polyanionic compound cathodes in large-scale energy storage systems. Up to now, many strategies including structural design, ion doping, surface coating, and electrolyte optimization have been explored to improve the above defects. Based on the above contents, this paper briefly reviews the research progress and optimization strategies of typical polyanionic compound cathodes in the fields of lithium-ion batteries (LIBs) and other promising metal ion batteries (sodium ion batteries (SIBs), potassium ion batteries (PIBs), magnesium ion batteries (MIBs), calcium ion batteries (CIBs), zinc ion batteries (ZIBs), aluminum ion batteries (AIBs), etc.), aiming to provide a valuable reference for accelerating the commercial application of polyanionic compound cathodes in rechargeable battery systems.

A Fast and Highly Stable Aqueous Calcium-Ion Battery for Sustainable Energy Storage.

Aqueous alkali-ion batteries are gaining traction as a low-cost, sustainable alternative to conventional organic lithium-ion batteries. However, the rapid degradation of commonly used electrode materials, such as Prussian Blue Analogs and carbonyl-based organic compounds, continues to challenge the economic viability of these devices. While stability issues can be addressed by employing highly concentrated water-in-salt electrolytes, this approach often requires expensive and, in many cases, fluorinated salts. Here, we show that replacing monovalent K+ ions with divalent Ca2+ ions in the electrolyte significantly enhances the stability of both a copper hexacyanoferrate cathode and a polyimide anode. These findings have direct implications for developing an optimized aqueous Ca-ion battery that demonstrates exceptional fast-charging capabilities and ultra-long cycle life and points toward applying Ca-based batteries for large-scale energy storage.

Covalent Organic Frameworks (COFs): A New Class of Materials for Multivalent Metal‐Ion Energy Storage Systems

The rise of electronic societies is driving a surge in the demand for energy storage solutions, particularly in the realm of renewable energy technologies like batteries, which rely heavily on efficient electrode materials and separators. As an answer to this necessity, Covalent Organic Frameworks (COFs) are emerging and a highly intriguing class of materials, garnering increased attention in recent years for their extensive properties and possible applications. This review addresses the remarkable versatility and boundless potential of COFs in scientific fields, mainly focusing on multivalent metal ion batteries (MMIBs), which include AIB (Aluminium‐ion batteries), MIB (Magnesium‐ion battery), CIB (Calcium‐ion battery), and ZIB (Zinc‐ion battery), as both electrode materials and separators across a spectrum of battery technology. Inclusive of their approaches, merits, and reaction mechanisms, this review offers an extensive summary of COFs concerning multivalent ion batteries. By providing a rigorous analysis of COF attributes, electrochemical behaviour, and methodologies, our explanation contributes to a deeper understanding of their potential in advancing battery technology.

Self-Adaptive Electrochemistry of Phosphate Cathodes toward Improved Calcium Storage.

Polyanion phosphates exhibit great potential as calcium-ion battery (CIB) cathodes, boasting high working voltage and rapid ion diffusion. Nevertheless, they frequently suffer from capacity decay with irreversible phase transitions; the underlying mechanisms remain elusive. Herein, we report an adaptively layerized structure evolution from discrete NaV2O2(PO4)2F nanoparticles (NPs) to interconnected VOPO4 nanosheets (NSs), triggered by electrochemical (de)calcification, leading to an improvement in Ca2+ storage performance. This electrochemistry-driven self-adapted layerization occurs over approximately 200 cycles, during which NPs undergo a "deform/merge-layerization" process, transitioning from a three-dimensional to a two-dimensional atomic structure, with a distinct 0.68 nm lattice spacing. The transition mechanism is demonstrated to be linked to the gradual separation of structural Na+ and F-. The resultant VOPO4 NSs exhibit exceptional Ca2+ diffusion kinetics (3.19 × 10-9 cm2 s-1, currently the optimal value among inorganic cathode materials for CIBs), enhanced capacity (∼100 mA h g-1), longevity (over 1000 cycles at 50 mA g-1), and high rate (84% retention rates when increasing current density from 50 to 200 mA g-1). Employing advanced electron microscopy, this study reveals an electrochemical activation-induced structure evolution at the atomic level, providing valuable insights into the design of high-performance CIB cathodes.

Next-generation cathodes for calcium-ion batteries: Leveraging NASICON structures for enhanced stability and energy density

This study focuses on developing a high-performance, stable cathode for calcium-ion batteries (CIBs) using a sodium superionic conductor (NASICON) structure to match the energy density and safety standards of current lithium- and sodium-ion batteries. Given the relatively sparse database of CIB materials compared with their lithium and sodium counterparts, expanding the range of new candidates is essential for developing high-performance batteries. To address this, we employed density functional theory (DFT) calculations, which provide a quantum-mechanical description of the electronic properties of materials, to construct a highly reliable database. To improve the accuracy and efficiency, we integrated machine learning interatomic potential with DFT to stabilize the NASICON-type structures, CaxNaV’yV’’2-yBzP3-zO12, where x = 0.8, 0.5, 0; y = 1, 0.5; z = 0.5, 0; V’ and V’’ are transition metals that support stable doped configurations at the V- and P-sites. From the initial 176 candidates, the top 10 materials that facilitate stable structures were identified based on selection criteria focusing on formation energy < 0 eV/atom, energy above hull = 0 eV/atom, gravimetric capacity ≥ 150 mAh/g, -1% ≤ volume change ≤ 1%, and 3 ≤ average voltage ≤ 4.5 V. This approach advances CIB technology and outlines effective strategies for dopant selection to optimize battery cathodes, configuring a framework for future advancements in battery technology.

Ionic conduction and cathodic properties of CaMO3 (M=Fe and Mn) electrode materials via molecular dynamics and first-principles simulations

Calcium-ion(Ca-ion) batteries are gaining ever-increasing attention for next-generation energy storage systems due to affordability, highly abundant, high energy density, high theoretical capacity, and low redox potential close to Li-ion. In this work, we deployed the first-principles and classical molecular dynamics simulations to investigate the electronic and diffusive properties of isostructural ternary perovskite CaMO3 (M= Fe and Mn). The transport properties at various temperatures from ion dynamics and electronic properties of CaMO3 perovskites are examined using classical molecular dynamics and quantum mechanical simulations, respectively. We present the microscopic origin of the diffusion of multivalent ions like Ca2+ within the crystal structure of perovskite material and the effects of two transition metals, manganese and iron. Dynamic studies of Ca-ions were performed using molecular dynamic simulation, which depicts the diffusivity and conductivity of Ca-ion in CaMO3 material. We find that the diffusivity in both the crystals increases with temperature; as a result, conductivity increases. Among both the crystals, CaFeO3 requires less activation energy for diffusion and ionic conduction than CaMnO3. Using density functional theory, we calculated specific capacity, electronic density of states, phase stability and equilibrium cell voltage, and charge transfer process during intercalation-deintercalation from first-principles calculations. The electronic behavior of these materials shows that CaFeO3 has better electronic and transport properties than CaMnO3.

Harnessing MBene termination for superior anode interfaces in Li/Ca-ion batteries

The elevation of two-dimensional (2D) transition metal borides, specifically MBenes, as anode materials for lithium-ion batteries (LIBs) and calcium-ion batteries (CIBs) can be achieved through strategic functionalization with appropriate groups. Utilizing a first-principles approach, we conducted an in-depth investigation into the electrochemical properties of chlorine-terminated V2B (V2BCl2) as a candidate anode material for LIBs and CIBs. V2BCl2 exhibits metallic behavior, as demonstrated by band structure analysis, which endows it with exceptional conductivity due to the free electron surface of the system, thereby embodying ideal anode characteristics. The dynamic and thermal stability of the system was assessed through comprehensive phonon dispersion analyses and ab-initio molecular dynamics (AIMD) calculations. High net charge transfer rates of Li/Ca ions towards the monolayer, augmented electron localization function (ELF) near system atoms, and the presence of ionic bonds between Ca/Li and the V2BCl2 monolayer contribute to the enhanced conductivity observed in these anode systems. This is corroborated by metrics such as the projected crystal orbital Hamiltonian population (-pCOHP), low diffusion energy barriers (< 0.35 eV) facilitating rapid charging mechanisms, and low open circuit voltages (< 0.32 V) ensuring robust battery performance stability. Furthermore, V2BCl2 exhibits notable specific storage capacities of 875.67 mAh g−1 for Ca ions and 1167.75 mAh g−1 for Li ions, surpassing the benchmarks set by recent MBene systems. These promising results strongly advocate for V2BCl2 as a viable candidate for anode material in both LIB and CIB applications, highlighting its potential significance in advancing battery technology.

Competition for Ion Intercalation in Prussian Blue Analogues as Cathode Materials for Calcium Ion Batteries

With multivalent ion batteries being considered viable post‐lithium energy storage technologies, the last few years have seen increasing interest in intercalation type cathode materials for Ca‐ion batteries (CIBs). Prussian blue analogues (PBAs) display many positive attributes such as open structural framework, large interstitial sites, and versatile transition metal redox activity. The PBA cathodes reported for CIBs often contain K‐ion or Na‐ion due to the syntheses involving the use of potassium or sodium hexacyanoferrate. It has been long overlooked whether the presence of K‐ion or Na‐ion in pristine PBAs could affect the Ca‐ion storage in the PBAs when assessing their CIB performance. Through a combined experimental and computational investigation, this work reports that when K+/Na+ is present in the pristine PBAs, K/Na intercalation is preferred by the PBA structure over Ca intercalation even in the Ca cells. Ca‐ion intercalation can be increased when the K+/Na+ content in the pristine PBAs is reduced, shifting from a K or Na‐dominated intercalation process to a Ca/K or Ca/Na co‐intercalation process. This work consolidates that PBAs are an interesting and versatile intercalation host for several ions, but investigating PBAs as intercalation cathodes requires careful consideration of all ions present in the battery system.

High-Performance Aqueous Calcium Ion Batteries Enabled by Zn Metal Anodes with Stable Ion-Conducting Interphases.

Aqueous calcium ion batteries, promising for energy storage, are still challenged by very limited anode choices. Although a Zn metal anode is popular in aqueous batteries, interface instability due to incessant corrosion and severe Zn dendrites hinders its development. Here, an interphase layer with densely packed nanocrystals of Ca3(CO3)2(OH)2·1.5H2O and ZnF2, and amorphous organic species, is demonstrated for a Zn metal anode with 1 M calcium trifluoromethyl sulfonate aqueous electrolyte. The hybrid interface fully avoids direct Zn-H2O contact, maintains fast ion conductivity, and effectively prevents corrosion and dendrite growth. Therefore, the symmetric cell stably lasts for 1600 h at 0.5 mA cm-2 and 2.5 mAh cm-2, far superior to 150 h for the control cell. Furthermore, the device maintains 80% capacity retention after 700 cycles at 1 A g-1, outperforming 13% retention after 200 cycles for the control device. This work indicates that interface and interphase engineering is also crucial for aqueous batteries.

Mitigating Jahn–Teller effect of MnO2 via charge regulation of Mn-local environment for advanced calcium storage

Manganese dioxide (MnO2) stands out as a prospective cathode material for calcium ion batteries (CIBs) owing to its elevated theoretical capacity and high operating voltage. Nevertheless, MnO2 with Jahn-Teller (J-T) twisted MnO6 octahedra experiences severe Mn dissolution during cycling, leading to the destabilization of the transition metal layer and resulting in poor cycling performance. In this work, Mo-substitution is purposely proposed to suppress the J-T effect in MnO2 for CIBs. The local charge of Mn is regulated by Mo doping, which enhances the electrical conductivity of MnO2 and suppresses the J-T distortion of the MnO6 octahedron. Meanwhile, density-functional theory (DFT) calculations manifest that Mo doping enhances the structural integrity of MnO2, making it difficult for Mn to escape from the MnO6 structure and inhibiting the dissolution of Mn. Accordingly, Mo-MnO2 demonstrates impressive rate capability (112 mAh g−1 at 1 A g−1) and excellent cycling stability, maintaining approximately 93.9 % capacity after 900 cycles at 1 A g−1. As a result, the introduction of heteroatoms through doping offers a novel design approach for the advancement of cathode materials for advanced CIBs.

High-energy fiber-shaped calcium-ion batteries enable integrated wearable electronics for human body monitoring

Electronic textiles hold the merits of high conformability with the human body and natural surrounding, possessing large market demand and wide application foreground in smart wearable and portable devices. However, their further application is largely hindered by the shortage of flexible and stable power sources with multifunctional designability. Herein, a free-standing ZnHCF@CF electrode (ZnHCF grown on carbon nanotube fiber) with good mechanical deformability and high electrochemical performance for aqueous fiber-shaped calcium ion battery (FCIB) is reported. Benefiting from the unique Ca2+/H+ co-insertion mechanism, the ZnHCF@CF cathode can exhibit great ion storage capability within a broadened voltage window. By pairing with a polyaniline (PANI)@CF anode, a ZnHCF@CF//PANI@CF FCIB is successfully fabricated, which exhibits a desirable volumetric energy density of 43.2 mWh cm−3 and maintains superior electrochemical properties under different deformations. Moreover, the high-energy FCIB can be harmoniously integrated with a fiber-shaped strain sensor (FSS) to achieve real-time physiological monitoring on knees during long-running, exhibiting great promise for the practical application of electronic textiles.

Theoretical study on the effect of shear deformation on WSe2 as a cathode material for calcium ion batteries

AbstractIn this paper, the first‐principles method is used to calculate the electronic structure of the intrinsic WSe2 system and the Ca adsorbed WSe2 system under shear deformation, and the diffusion barrier of Ca on WSe2 is studied in depth. The results show that shear deformation can effectively reduce the band gap of WSe2 system, and shear deformation can easily lead to the transition from semiconductor properties to metal properties. The adsorption of Ca leads to the change of the band structure of WSe2. The contribution of Ca‐d electrons leads to an increase in the peak in the range of 3–6 eV. The shear deformation reduces the diffusion barrier of Ca on the WSe2 surface. This paper provides an improvement method for the application of WSe2 in the field of battery.

Layered Na2Ti3O7 as an Ultrastable Intercalation-Type Anode for Non-Aqueous Calcium-Ion Batteries.

Calcium ion batteries (CIBs) are a promising energy storage device due to the low redox potential of the Ca metal and the abundant reserves of the Ca element. However, the large radius and divalent nature of Ca2+ lead to its slow ion diffusion kinetics and the lack of suitable electrode materials for Ca storage. Here, a layered structure of Na2Ti3O7 (NTO) is presented as an anode material for nonaqueous CIBs. This NTO anode demonstrates a high discharge capacity of 165 mA h g-1 at 100 mA g-1 and a remarkable capacity retention rate of 80%, even after 2000 cycles at 500 mA g-1, surpassing the performance of all reported intercalation-type anode materials for CIBs. The NTO transfers to layered CaVIINaIXTi3O7 (CNTO) with intercalation of Ca2+ and extraction of Na+ during the first discharge process. Then, the CNTO undergoes the reversible insertion/extraction of Ca2+ during subsequent cycling. Additionally, density functional theory calculations reveal that NTO possesses a rapid two-dimensional diffusion pathway for Ca2+. Moreover, the full CIBs based on NTO as the anode further underscore its potential for CIBs. This work presents promising anode materials for CIBs, offering opportunities to promote the development of high-performance CIBs.

First-principles study on the effect of torsional deformation on WSe2 as an anode material for calcium ion batteries.

In this paper, the effects of torsional deformation on the electronic properties of intrinsic WSe2 system and Ca-adsorbed WSe2 system were systematically studied by first-principles method. The results show that Ca can be stably adsorbed on the vacancy (H site) of WSe2 surface in all deformation systems, and the adsorption energy of the system without deformation is the highest. Intrinsic WSe2 is a semiconductor with a direct band gap of 1.53 eV. The torsional deformation makes WSe2 change from a direct band gap semiconductor to an indirect band gap semiconductor and finally to a metal property. The adsorption of Ca makes the conduction band of WSe2 move down and increases the number of peaks in the conduction band region. The new density of state peaks are mainly derived from the contribution of W-d, Se-p, and d orbitals of adsorbed atoms in each adsorption system. Mulliken charge analysis shows that Ca transfers most of the valence electrons to the substrate, and the torsional deformation changes the amount of transferred charge. The twist deformation reduces the diffusion barrier of Ca on WSe2 surface from 0.20 to 0.14 eV. The above results provide a basis for the improved application of WSe2 in ion batteries. In this study, all the first-principles calculations are based on Materials Studio 8.0 software package. The generalized gradient approximation (GGA) functional Perdew-Burke-Ernzerhof (PBE) is used for the electron exchange correlation interactions in all systems. The optimization algorithm uses Broyden-Fletcher-Goldfarb-Shanno (BFGS) to optimize the model structure and calculate the energy. The measured cutoff energy is optimized to 450 eV, and the radius of the vacuum layer in the Z-axis direction is 20 Å. The K-point of 7 × 7 × 1 is selected by Monkhorst-Pack method. The structural optimization criterion is selected, the convergence radius of the force is 0.01 eV/Å, and the displacement radius between atoms is within 0.001 Å distance. The energy convergence radius of each atom is less than 1.0 × 10-6 eV/atom.

Conjugated polyaniline as “conveyor” in tungstate boosting cation storage for high-performance aqueous batteries

Aqueous ion storage systems have motivated great interest by virtue of low reduction, high eco-sustainability and safety. Among various cathode candidates, transition metal compounds are featured with easy dissolution in aqueous solutions and inferior conductivity, which severely hinder their application. Herein, advantages are taken of the “conveyor effect” of conjugated polyaniline to prepare an oxygen defective tungstate-linked polyaniline (Od-WOP) material with chrysanthemum-like microstructure. By virtue of the high electronic conductivity derived from conductive conjugated polyaniline skeleton, unbalanced charge distribution triggered by the defective structure, and reversibly rapid ion (de)intercalation benefited from the open framework with porous chrysanthemum-like microstructure, it delivers outstanding rate capability with a maximum specific capacity of 162.2 mAh g−1 and great cycle stability for storing NH4+. Additionally, it also adopts a high reversible capacity of 140.4 mAh g−1 and outstanding cycling performance to store Ca2+. Consequently, the assembled Od-WOP//PTCDI flexible aqueous ammonium ion batteries and calcium ion batteries exhibit superior capacities, energy densities and flexibilities. Od-WOP achieves the NH4+ and Ca2+ storage capability by interacting with them through hydrogen and ionic bonds, respectively. The deep insight from this work sheds light upon a novel strategy to excavate greater potential of transition metal compounds for aqueous ion batteries.

Freestanding Ammonium Vanadate Composite Cathodes with Lattice Self-Regulation and Ion Exchange for Long-Lasting Ca-Ion Batteries.

Calcium-ion batteries (CIBs) have emerged as a promising alternative for electrochemical energy storage. The lack of high-performance cathode materials severely limits the development of CIBs. Vanadium oxides are particularly attractive as cathode materials for CIBs, and preinsertion chemistry is often used to improve their calcium storage performance. However, the room temperature cycling lifespan of vanadium oxides in organic electrolytes still falls short of 1000 cycles. Here, based on preinsertion chemistry, the cycling life of vanadium oxides is further improved by integrated electrode and electrolyte engineering. Utilizing a tailored Ca electrolyte, the constructed freestanding (NH4)2V6O16·1.35H2O@graphene oxide@carbon nanotube (NHVO-H@GO@CNT) composite cathode achieves a 305 mAh g-1 high capacity and 10000 cycles record-long life. Additionally, for the first time, a Ca-ion hybrid capacitor full cell is assembled and delivers a capacity of 62.8 mAh g-1. The calcium storage mechanism of NHVO-H@GO@CNT based on a two-phase reaction and the exchange of NH4 + and Ca2+ during cycling are revealed. The lattice self-regulation of V─O layers is observed and the layered vanadium oxides with Ca2+ pillars formed by ion exchange exhibit higher capacity. This work provides novel strategies to enhance the calcium storage performance of vanadium oxides via integrated structural design of electrodes and electrolyte modification.

Design Principles and Routes for Calcium Alkoxyaluminate Electrolytes.

Multivalent-ion battery technologies are increasingly attractive options for meeting diverse energy storage needs. Calcium ion batteries (CIB) are particularly appealing candidates for their earthly abundance, high theoretical volumetric energy density, and relative safety advantages. At present, only a few Ca-ion electrolyte systems are reported to reversibly plate at room temperature: for example, aluminates and borates, including Ca[TPFA]2, where [TPFA]- = [Al(OC(CF3)3)4]- and Ca[B(hfip)4]2, [B(hfip)4]2- = [B(OCH(CF3)2)4]-. Analyzing the structure of these salts reveals a common theme: the prevalent use of a weakly coordinating anion (WCA) consisting of a tetracoordinate aluminum/boron (Al/B) center with fluorinated alkoxides. Leveraging the concept of theory-aided design, we report an innovative, one-pot synthesis of two new calcium-ion electrolyte salts (Ca[Al(tftb)4]2, Ca[Al(hftb)4]2) and two reported salts (Ca[Al(hfip)4]2 and Ca[TPFA]2) where hfip = (-OCH(CF3)2), tftb = (-OC(CF3)(Me)2), hftb = (-OC(CF3)2(Me)), [TPFA]- = [Al(OC(CF3)3)4]-. We also reveal the dependence of Coulombic efficiency on their inherent propensity for cation-anion coordination.

Discovering the Order-Disorder Transition in Quinoline Intercalated Vanadium Oxide with Superior Calcium Storage via Polyhedral Distortion.

Calcium-ion batteries (CIBs) are considered as potential next-generation energy storage systems due to their abundant reserves and relatively low cost. However, irreversible structural changes and weak conductivity still hinder in current CIBs cathode materials. Herein, an organic molecular intercalation strategy is proposed, in which V2O5 regulated with quinoline, pyridine, and water molecules are studied as cathode material to provide fast ion diffusion channels, large storage host, and high conductivity for Ca ions. Among them, V2O5-quinoline (QVO) owns the largest interplanar spacing of 1.25 nm and the V-O chains are connected with organic molecular by hydrogen bond, which stabilizes the crystal structure. As a result, QVO exhibits a specific capacity of 168 mAh g-1 at 1 A g-1 and capacity retention of 80% after 500 cycles at 5 A g-1 than the other materials. Furthermore, X-Ray diffraction and X-ray absorption spectroscopy results reveal a reversible order-disorder transformation mechanism of Ca2+ for QVO, which can make full use of the abundant active sites for high capacity and simultaneously achieve fast reaction kinetics for excellent rate performance. These results demonstrate that QVO is a promising cathode material for CIBs, providing more choices for the development of high-performance CIBs.

Theoretical study on the effect of torsional deformation on WTe2 as a cathode material for calcium ion batteries.

In this study, the electronic structure and diffusion barrier of the Ca-adsorbed WTe2 system under different torsion angles were calculated based on the first-principles method. The results show that the structure and properties of the pure WTe2 system and Ca-adsorbed WTe2 system are affected by torsional deformation. When the torsion angle is 6°, the intrinsic WTe2 changes from a direct band gap to an indirect band gap. The torsional deformation does not change the metallicity of the Ca-adsorbed WTe2 system. The Ca-d state electrons contribute to the electron density of WTe2. The calculation of the diffusion barrier shows that the torsion deformation promotes the diffusion of calcium on the surface of WTe2. This study provides a theoretical basis for the regulation of electrode materials. In this study, Materials Studio 8.0 software was used to construct the WTe2 model and Ca-adsorbed WTe2 model, and CASTEP module was used for first-principles calculation.