Cadmium Selenide Quantum Dots Research Articles

Thermal lens investigation of the CdSe quantum dots using dual beam z-scan technique

We highlighted on the thermal lens (TL) effect of Cadmium Selenide quantum dots (CdSe QDs) using dual beam z-scan technique. The thermal lens nonlinear optical properties of CdSe QDs were investigated by applying the two CW laser beams (λ = 532 nm and λ = 632.8 nm). The thermal lens parameters of the CdSe solutions, such as: the on-axis phase shift (θ), the thermal diffusivity (D), and thermal diffusion time (tc) were extracted using the theoretical thermal lens model. Our results give new insight into the CdSe QDs dissolved in toluene and are valuable for further development of semiconductor QDs optical devices.

Ultrasensitive solid-state electrochemiluminescence sensor based on lotus root shaped carbon fiber, CdSe QDs and Fe3O4 synergically amplify Ru(bpy)32+ luminophore signal for detection of cyfluthrin.

An efficient and innovative electrochemiluminescence (ECL) sensor was developed for trace detection of cyfluthrin.The sensor utilized materials such as lotus root shaped carbon fiber (Co CNFs), cadmium selenide quantum dots (CdSe QDs), and Fe3O4 to amplify Ru(bpy)32+ signals. Co CNFs, with its large specific surface area and porosity, served the purpose of not only enhancing the stability of the sensor by fixing CdSe QDs and Ru(bpy)32+ on the Co CNFs/GCE, but also facilitating electron transfer. CdSe QDs was involved in the luminescence reaction and collaborated with Ru(bpy)32+ to enhance the sensor's sensitivity, while Fe3O4 promoted electron transfer in the system due to its large surface area. The solid-state ECL sensor achieved satisfactory signal under the synergistic action of these components. The ECL signal of the sensor was quenched by cyfluthrin, and a favorable linear relationship was observed between the sensor and cyfluthrin in the concentration range 1 × 10-12 to 1 × 10-6 M. The detection limit of the sensor was 3.3 × 10-13 M (S/N = 3). The utilization of lotus root shaped carbon fiber, CdSe QDs, and Fe3O4 in the Ru(bpy)32+ system demonstrated a synergistic effect for cyfluthrin detection, presenting a new approach for the rapid determinationanalysis of pesticide residues in foods.

CdSe nanostructured thin film by electrophoretic deposition for quantum dots sensitized solar cell.

Cadmium selenide (CdSe) quantum dots (QDs) with different size, 2.5 and 3.2 nm, were successfully deposited on mesoporous titanium dioxide (TiO2) (Degussa-P25) nanostructures by electrophoretic deposition method (EPD) at the applied voltage 100 V for 120 s deposition time. In this study, the morphology of CdSe films deposited by EPD and the performance of the film when assembled into a solar cell were investigated. From the field emission scanning electron microscopy cross-section, the thickness of the CdSe nanoparticles with size 2.5 nm films were 3.4 and 3.0μm for CdSe 3.2 nm nanoparticles film. The structure of 2.5 nm is denser than compare of 3.2 nm CdSe nanoparticles. From UV visible spectroscopy, the band gap calculated for 2.5 nm CdSe nanoparticles is 2.28 eV and for 3.2 nm is 2.12 eV. Photovoltaic characterization was performed under an illumination of 100 mW cm-2. A photovoltaic conversion efficiency of 1.81% was obtained for 2.5 nm CdSe and 2.1% was obtained for 3.2 nm CdSe nanoparticles. This result shows that the photovoltaic efficiency is dependent on CdSe nanoparticle size.

Simple and Cost-Effective Quantum Dot Chemodosimeter for Visual Detection of Biothiols in Human Blood Serum.

An emission "turn-off" chemodosimeter for the naked-eye detection of biothiols using silica-overcoated cadmium selenide quantum dots is developed. Hole scavenging by the thiol group of cysteine, homocysteine, or glutathione on interaction with quantum dots resulted in an instant and permanent emission quenching under physiologically relevant conditions. Also, the emission suppression is so specific that thiols and substituted thiols (methionine and cystine) can easily be distinguished. A pilot experiment for the visual detection of serum thiols in human blood was also conducted. Densitometry analysis proved the potential of this system as a new methodology in clinical chemistry and research laboratories for routine blood and urine analyses using a simple procedure. This method enables one to visually distinguish biothiols and oxidized biothiols, whose ratio plays a crucial role in maintaining "redox thiol status" in the blood.

Interactions of CdSe Nanocrystals with Cationic Proteins Extracted from Moringa oleifera Seeds

Even with significant developments in nanoscience, relatively little is known about the interactions of nanocrystal semiconducting materials with bio-macromolecules. To investigate the interfacial phenomena of cadmium selenide quantum dot (CdSe QD) nanocrystals with proteins extracted from Moringa oleifera seeds, different concentrations of cadmium selenide quantum dots–Moringa oleifera seed protein (CdSe–MSP) complexes were prepared. Respective CdSe QDs with hexagonal phase and crystalline size in the range of 4–7 nm were synthesized and labelled with the purified mesoporous MSP having a surface area of 8.4 m2/g. The interaction mechanism between CdSe QDs and MSP was studied using UV–Vis absorption, fluorescence emission and Fourier Transform Infrared spectroscopies. The UV–Vis absorption spectra showed absorption bands of CdSe–MSP complexes at 546.5 nm. The fluorescence intensity of CdSe QDs was found to decrease with increasing concentration of MSP. The thermodynamic potentials ∆Hθ (−321.3 × 103 Jmol−1); ∆Sθ (156.0 JK−1mol−1) and ∆Gθ (−46.6 × 103 Jmol−1) were also calculated. The stability of the complex found is strongly influenced by electrostatics interaction and surface-bound complexation equilibrium attraction. This information can help to elucidate the surface characteristics of MSP and its potential interactions with other molecules or nanoparticles.

Synaptic endocytosis in adult adipose stromal cell-derived neurons

Synapses are essential for facilitating the transmission of information between neurons and for executing neurophysiological processes. Following the exocytosis of neurotransmitters, the synaptic vesicle may quickly undergo endocytosis to preserve the structural integrity of the synapse. When converting adipose-derived stromal cells (ADSCs) into neurons, the ADSCs have already demonstrated comparable morphology, structure, and electrophysiological characteristics to neurons. Nevertheless, there is currently no published study on the endocytotic function of neurons that are produced from ADSCs. This study aimed to examine synaptic endocytosis in neurons derived from ADSCs by qualitatively and quantitatively analyzing the presence of Ap-2, Clathrin, Endophilin, Dynamin, and Hsc70, which are the key proteins involved in clathrin-mediated endocytosis (CME), as well as by using FM1-43 and cadmium selenide quantum dots (CdSe QDs). Additionally, single-cell RNA sequencing (scRNA-seq) was used to look at the levels of both neuronal markers and markers related to CME at the same time. The results of this study provide evidence that synapses in neurons produced from ADSCs have a role in endocytosis, mainly through the CME route.

Thiosulfate-terminated CdSe quantum dots for improving the performance and stability of perovskite solar cells

Cadmium selenide (CdSe) quantum dots (QDs) as functional interface layer have been used to improve the performances of perovskite solar cells (PSCs). However, the optimization of PSCs by CdSe QDs has some challenges of inferior performances for charge transportation, and interface defects, which are not conducive to the development of power conversion efficiency (PCE). Here, sodium thiosulfate capped CdSe QDs (S2O32--CdSe QDs) are prepared as interface modifiers to improve the performances of PSCs. The S2O32--CdSe QDs can effectively passivate defects and reduce interfacial nonradiative recombination, Moreover, the S2O32--CdSe QDs regulate the energy level of perovskite film. In addition, the S2O32--CdSe QDs form an interface layer to increase moisture resistance and improve the stability of PSCs. As a result, the devices with S2O32--CdSe QDs show an improved power conversion efficiency (PCE) of 22.57 %. Meanwhile, the stabilities of the unencapsulated device with S2O32--CdSe QDs under 25 °C with a humidity of 30 %–40 %, and 85 °C in N2 heat both perform better than the control devices.

One-Pot Synthesis of Semiconducting Quantum Dots–Organic Linker–Carbon Nanotubes for Potential Applications in Bulk Heterojunction Solar Cells

Materials and composites with the ability to convert light into electricity are essential for a variety of applications, including solar cells. The development of materials and processes needed to boost the conversion efficiency of solar cell materials will play a key role in providing pathways for dependable light to electric energy conversion. Here, we show a simple, single-step technique to synthesize photoactive nanocomposites by coupling carbon nanotubes with semiconducting quantum dots using a molecular linker. We also discuss and demonstrate the potential application of nanocomposite for the fabrication of bulk heterojunction solar cells. Cadmium selenide (CdSe) quantum dots (QDs) were attached to multiwall carbon nanotubes (MWCNTs) using perylene-3, 4, 9, 10-tetracarboxylic-3, 4, 9, 10-dianhydride (PTCDA) as a molecular linker through a one-step synthetic route. Our investigations revealed that PTCDA tremendously boosts the density of QDs on MWCNT surfaces and leads to several interesting optical and electrical properties. Furthermore, the QD–PTCDA–MWCNTs nanocomposites displayed a semiconducting behavior, in sharp contrast to the metallic behavior of the MWCNTs. These studies indicate that, PTCDA interfaced between QDs and MWCNTs, acted as a molecular bridge which may facilitate the charge transfer between QDs and MWCNTs. We believe that the investigations presented here are important to discover simple synthetic routes for obtaining photoactive nanocomposites with several potential applications in the field of opto-electronics as well as energy conversion devices.

Improved performance of cadmium selenide quantum dots-doped polymer stabilized cholesteric liquid crystals for light shutter

ABSTRACT In this work, cadmium selenide quantum dots (CdSe QDs)-doped polymer stabilized cholesteric liquid crystals composites (PSCLC) are proposed for low-power light shutters. CdSe QDs with different concentrations, (0.1 and 0.25 wt.%) into PSCLC composites are fabricated and studied. The phase-dependent and morphological studies are investigated in all the samples. The morphological study reveals that doped sample transform from planar to homeotropic type of orientation at low voltage (~15 V), at an optimum concentration 0.1 wt. % of CdSe QDs in PSCLC. Dielectric analysis infers that dispersion of CdSe QDs increases the permittivity (~36%) of the composites. At 0.1 wt.% QDs-doped PSCLC system, the dielectric anisotropy also increases, however a decrease in splay elastic constant could be seen. Voltage dependence on transmission behaviour also shows that the threshold as well as saturation voltages are lower (6.5 V and 19.5 V, respectively) for 0.1 wt.% QDs-doped system than undoped sample. This signifies that desired alignment to the liquid crystal molecules is easily achieved at low electrical energy by the incorporation of CdSe QDs. CdSe QDs may be incorporated into PSCLC to develop novel functional devices operated at low power.

Graphene oxide mediated CdSe quantum dots fluorescent aptasensor for high sensitivity detection of fluoroquinolones

In view of the urgent need for fluoroquinolones contamination detection in the fields of food safety, a novel aptasensor based on the fluorescence quenching property of graphene oxide (GO) and the fluorescence characteristic of cadmium selenide quantum dots (CdSe QDs) was developed for fluoroquinolones highly sensitive detection in this work. The CdSe QDs with carboxyl-rich surface were synthesized successfully and fluoresced at 525 nm under the optimal excitation light of 366 nm. Based on the hydrophobic and π-π stacking between GO and aptamer, aptamer labeled by CdSe QDs fluorescence (CdSe QDs-apt) were adsorbed by GO and the fluorescence of CdSe QDs was quenched. After the aptamer combined specifically with fluoroquinolones, greater specific force lead to the desorption of CdSe QDs-apt from GO and fluorescence recovery. Represented by Ciprofloxacin (CIP), a member of fluoroquinolones, the fluorescence emission increased with the increasing of CIP concentrations from 8 nM to 500 nM, and the detection limit was 0.42 nM. The spiked recoveries in real samples of honey and milk were 91.5–96.9 % and 90.3–95.2 %, respectively, indicating that the aptasensor was reliable. Moreover, the fluorescence responses of multiple members of fluoroquinolones were found to be consistent, denoting that the fluorescence aptasensor can be used to detect the total amount of multiple members of fluoroquinolones. These results showed that the aptasensor can be used as a promising platform for fluoroquinolones detection.

Morphological and lipid metabolism alterations in macrophages exposed to model environmental nanoplastics traced by high-resolution synchrotron techniques.

The release of nanoplastics (NPs) in the environment is a significant health concern for long-term exposed humans. Although their usage has certainly revolutionized several application fields, at nanometer size, NPs can easily interact at the cellular level, resulting in potential harmful effects. Micro/Nanoplastics (M/NPs) have a demonstrated impact on mammalian endocrine components, such as the thyroid, adrenal gland, testes, and ovaries, while more investigations on prenatal and postnatal exposure are urgently required. The number of literature studies on the NPs' presence in biological samples is increasing. However, only a few offer a close study on the model environmental NP-immune system interaction exploited by advanced microscopy techniques. The present study highlights substantial morphological and lipid metabolism alterations in human M1 macrophages exposed to labeled polypropylene and polyvinyl chloride nanoparticles (PP and PVC NPs) (20 μg/ml). The results are interpreted by advanced microscopy techniques combined with standard laboratory tests and fluorescence microscopy. We report the accurate detection of polymeric nanoparticles doped with cadmium selenide quantum dots (CdSe-QDs NPs) by following the Se (L line) X-ray fluorescence emission peak at higher sub-cellular resolution, compared to the supportive light fluorescence microscopy. In addition, scanning transmission X-ray microscopy (STXM) imaging successfully revealed morphological changes in NP-exposed macrophages, providing input for Fourier transform infrared (FTIR) spectroscopy analyses, which underlined the chemical modifications in macromolecular components, specifically in lipid response. The present evidence was confirmed by quantifying the lipid droplet (LD) contents in PP and PVC NPs-exposed macrophages (0-100 μg/ml) by Oil Red O staining. Hence, even at experimental NPs' concentrations and incubation time, they do not significantly affect cell viability; they cause an evident lipid metabolism impairment, a hallmark of phagocytosis and oxidative stress.

Case study of electrical, structural and optical properties of CdSe Quantum Dots using DFT based computational tools.

Recent advancement in the field of nano-structured electronic devices has finely tuned up various progenition and manufacturing process of Quantum Dots that can directly harvest energy from solar power. Duly acknowledging different types of procuring processes, the paper primarily focuses on eight different CdSe (Cadmium Selenide) Quantum DOT samples which are initially synthesized in the material testing lab from the available precursor. Structural and electrical properties of these synthesized nano materials are inspected using DFT (Density function theory) based commercial tool - ESPRESSO. Later on, different photo luminous spectroscopic methods are used to understand the optical characteristics of the CdSe based nanomaterials. Light scattering method is applied to comprehend greater insights about the same sampled nano materials based on different parameters such as – polydispersity index (PI), Stokes shift analysis, zeta potential etc. Finally, the most equipped CdSe Quantum DOT sample is chosen for future purpose and a sensitive case study covering diverse advantages, disadvantages and future challenges of QDOTs is carried out.

Highly Sensitive Sensor for the Determination of Riboflavin Using Thionine Coated Cadmium Selenide Quantum Dots Modified Graphite Electrode

In this paper, the electrochemical non-enzymatic detection of Riboflavin (RF) was proposed based on its catalytic reduction in a Thionine-coated Cadmium Selenide Quantum dots (TH@CdSe QDs)-modified paraffin wax-impregnated graphite electrode (PIGE) that was prepared using a novel approach. The synthesized TH@CdSe QDs were confirmed by UV-Vis spectroscopy, Confocal Raman Microscopy and High Resolution Transmission Electron Microscopy (HRTEM) studies. The electrochemical response of the TH@CdSe QDs-modified PIGE was studied by cyclic voltammetry. The voltammetric response of RF at the TH@CdSe QDs-modified PIGE showed higher current than the bare PIGE. Under optimum conditions, the electrocatalytic reduction currents of RF was found to be linearly related to its concentration over the range of 1.6 × 10−7 M to 1.4 × 10−4 M with a detection limit of 53 × 10−9 M (S/N = 3). The TH@CdSe QDs-modified PIGE was utilized as an amperometric sensor for the detection of RF in flow systems was performed by carrying out hydrodynamic and chronoamperometric experiments. The TH@CdSe QDs-modified PIGE showed very good stability and a longer shelf life. The applicability of the fabricated electrode was justified by the quantification of RF in commercial tablets.

Quantum Dot-Based Fluorometric Sensor for Hg(II) in Water Customizable for Onsite Visual Detection.

An easy naked-eye detection technique for mercuric ions in water using silanized quantum dots is demonstrated. Cadmium selenide quantum dots were synthesized and rendered water soluble by silica overcoating. The quantum dot emission was instantly turned off by the mercuric ions in the analyte, enabling visual detection. The emission quenching was associated with a concomitant bathochromic shift, both in the absorption and emission profiles. The underlying mechanism is a permanent surface modification of quantum dots by mercuric ions, altering the electronic structure and, in turn, the photophysical properties. The results confirmed the potential of this simple system to be customized for on-site visual detection of mercury contamination in water bodies, biological fluids, and soil with high selectivity and sensitivity.

3D surface microstructure of silicon modified by QDs to improve solar cell performance through down-conversion and anti-reflection mechanism

Improving the photoelectric conversion efficiency (PCE) of solar cells is an important subject for a wide range of photovoltaic research. One of the main reasons for low PCE is the mismatch between solar spectrum and solar cells. The use of down-conversion and anti-reflection mechanisms is a reasonable method to increase PCE. Down-conversion can convert low-absorbance photons in silicon solar cells into high-absorbance photons while the special 3D surface structure formed by the down-conversion material produces an anti-reflection effect to increase the PCE of the solar cell. In this study, cadmium selenide (CdSe) quantum dots (QDs) coating hybrid structure of monocrystalline silicon solar cells was proposed to increase the utilization. Here, the CdSe QDs were synthesized with a high absorption strength in the 300–500 nm and a photoluminescence (PL) peak at 628 nm. Benefiting from the larger absorption cross-section and weaker electron-phonon coupling characteristics of CdSe QDs, the down-conversion was achieved successfully, and the reflectance test of the CdSe QDs covered silicon solar cells also shows an anti-reflection effect. Therefore, by using the dual mechanism of down-conversion and anti-reflection, the PCE of solar cells was improved by the proposed system. The results show that the PCE of the CdSe QDs coating hybrid structure based monocrystalline silicon solar cells is increased by 1.42% from 14.45% to 15.87%. Besides, by using finite element method, the reflection reduction mechanism for lower transition layer was also simulated to further explain the experiment results. Due to the low synthesis cost of QDs, this work can be well integrated into the photovoltaic industry, which provides a new technical route and guidance for improving the PCE of silicon cells.

Highly sensitive humidity sensor based on cadmium selenide quantum dots-polymer composites: synthesis, characterization, and effect of UV/ozone treatment

This work describes the rational design of thin film-based cadmium selenide quantum dots (CdSe) mixed with conductive polyvinylidene fluoride (PVDF), inducing PVDF-CdSe composite for potential resistive humidity-sensing applications. The effect of UV/ozone treatment on surface hydrophilicity and sensing properties was investigated. AFM has been performed to examine the prepared films' texture, distribution over the surface, and size. Overall, the hydrophilicity of the developed films increases with UV radiation exposure time, leading to enhanced water vapor absorption without deforming the film surface. The sensor's sensitivity is improved with increasing UV radiation exposure. The electrical response of the PVDF-CdSe humidity sensors after 30 min of UV/ozone treatment reveals that at higher humidity levels (i.e., > 80% RH), the sensors exhibit an irregular response. However, at 20 min, treatment increases sensitivity and a linear change in impedance response concerning humidity level change compared to other samples. The hysteresis response was divided into two regions: the lower region, between 30 and 60% RH—where the maximum hysteresis loss was calculated to be 3%. While the higher area between 60 and 90% RH, where the maximum estimated hysteresis loss of the PVDF-CdSe sensor is around 14%, the UV/ozone treatment of the PVDF-CdSe nanocomposite film was found to enhance the sensing film's hydrophilicity without deforming the surface of the as-prepared PVDF-CdSe as well as the UV-treated films validates a potential for novel humidity sensors.

Digitizing protocols into single reactors for the one-pot synthesis of nanomaterials

Digitizing protocols into single reactors for the one-pot synthesis of nanomaterials

Cadmium selenide quantum dots and its biomedical applications

The focus of the present review is to provide a detailed discussion about the outstanding properties, namely physical, optical (majorly quantum confinement phenomenon), and electrical of cadmium selenide quantum dots (CdSe QDs). CdSe QDs have extensive utility in the biomedical domain owing to their unique properties. Thus, this review illustrates the wide range of applications of CdSe QDs in optical features, such as targeted drug delivery, drug resistance, drug analysis, photo-thermal therapy, antimicrobial activity, and tissue staining. Moreover, this review also highlights by discussing about the optical and optoelectronic application, which includes a good display, lasing, light emitting diode, and bioimaging that requires elevated photoluminescence spectra, quantum yield, and photostability.

Tailoring the physical parameters of ferroelectric liquid crystal mixture with cadmium selenide quantum dots

ABSTRACT Present studies demonstrate the dispersion effect of cadmium selenide quantum dots on ferroelectric liquid crystal mixture properties. Varying concentrations of cadmium selenide quantum dots (0.05 wt.%, 0.10 wt.% and 0.50 wt.%) have been taken to investigate its influence on the physical parameters of ferroelectric liquid crystal mixture KCFLC 10R. Phase transition, textural, electro-optical and photoluminescence studies have been performed in planar aligned cells. The presence of QDs disturbs the geometrical symmetry and molecular tilt of ferroelectric liquid crystal molecules which results in the modification of physical parameters of ferroelectric liquid crystal. It has been observed that doped samples have shown decrement in spontaneous polarisation and rotational viscosity. However, there is an improvement in the response time of the doped samples. The reduction in the spontaneous polarisation with voltage signifies that doped samples can operate at low voltage (~6 V) as compared to ferroelectric liquid crystal mixture (~12 V). Photoluminescence studies reveal that all the samples absorb UV light ~340 nm and produce visible emission at ~ 400 nm which can behave as UV light storage and high contrast display. This would be beneficial for luminescent displays as well as UV to visible light conversion applications.

Block Copolymer-Templated Au@CdSe Core-Satellite Nanostructures with Solvent-Dependent Optical Properties

In the present work, we report the fabrication and characterization of well-defined core-satellite nanostructures. These nanostructures comprise block copolymer (BCP) micelles, containing a single gold nanoparticle (AuNP) in the core and multiple photoluminescent cadmium selenide (CdSe) quantum dots (QDs) attached to the micelle's coronal chains. The asymmetric polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) BCP was employed to develop these core-satellite nanostructures in a series of P4VP-selective alcoholic solvents. The BCP micelles were first prepared in 1-propanol and subsequently mixed with AuNPs, followed by gradual addition of CdSe QDs. This method resulted in the development of spherical micelles that contained a PS/Au core and a P4VP/CdSe shell. These core-satellite nanostructures, developed in different alcoholic solvents, were further employed for the time-resolved photoluminescence analysis. It was found that solvent-selective swelling of the core-satellite nanostructures tunes the distance between the QDs and AuNPs and modulates their Förster resonance energy transfer (FRET) behavior. The average lifetime of the donor emission varied from 12.3 to 10.3 nanoseconds (ns) with the change in the P4VP-selective solvent within the core-satellite nanostructures. Furthermore, the distances between the donor and acceptor were also calculated using efficiency measurements and corresponding Förster distances. The resulting core-satellite nanostructures hold promising potential in various fields, such as photonics, optoelectronics, and sensors that utilize the FRET process.