C2-C7 Angle Research Articles

The Relationship Between Cervical Sagittal Balance and Type of Atlantoaxial Dislocation Secondary to Os Odontoideum

To analyze the effect of cervical sagittal balance on the direction and type of atlantoaxial dislocation. Data of 55 patients seen at our hospital for atlantoaxial instability/dislocation caused by os odontoideum were reviewed. Radiographic variables, including T1 slope (T1S), C1-C2 angle, C2-C7 angle, C1-C2 sagittal vertical axis (SVA), C2-C7 SVA, and atlanto-dens interval (ADI), were measured preoperatively. Patients were divided into three groups according to ADI: anterior atlantoaxial dislocation, atlantoaxial instability, and posterior atlantoaxial dislocation. Differences within and between groups in radiographic variables and relationships between the investigated variables were analyzed. ADI was strongly negatively associated with C1-C2 angle (r=-0.805, P < 0.05); whereas ADI had a medium-strength positive relationship with C2-C7 angle (r= 0.425, P < 0.05) and a medium-strength negative relationship with C2-C7 SVA (r=-0.411, P<0.05). However, ADI was not significantly correlated with T1 slope (r=-0.092, P>0.05). The type and direction of atlantoaxial dislocation is closely associated with cervical sagittal balance. C2-C7 SVA is an important factor in assessing the direction of atlantoaxial subluxation secondary to os odontoideum. ADI decreases with increasing C2-C7 SVA. The larger the C2-C7 SVA, the more likely the atlantoaxial dislocation is to be posterior.

Influence of the deviated center of rotation on the range of motion after cervical disc arthroplasty –an in vivo study with a minimum of 10-year follow-up

BackgroundShort-term researches have studied the change of the center of rotation (COR) after the Bryan Cervical disc arthroplasty (CDA). But there is a lack of long-term studies focusing on the location of COR and its influence after surgery.MethodsClinical and radiographic materials of patients who received CDA were retrospectively reviewed. Written informed consents were obtained. Clinical outcome was accessed by Japanese Orthopaedic Association (JOA), Neck Disability Index (NDI), and Odom’s scale. Radiographic evaluation underwent before surgery, at early (3 months) follow-up and final (minimal 10 years) follow-up. The ROM of the global cervical spine and index level, the functional spine unit (FSU) angle and C2-C7 angle were measured. COR was identified and its coordinates were calculated. The absolute change of COR-x and COR-y were compared in subgroup analysis.ResultsSixty patients were included, with an average age of 55.9 ± 8.1 years old. The mean duration of follow up was 135.1 ± 16.1 (120–155) months. JOA, NDI and Odom’s scale showed significant improvements at 10 years after surgery. The COR of index level was located in the posterior superior half of the caudal vertebral body. Following the implant of Bryan Disc, the COR shifted forward and downward. During the 10-year follow-up, the location of COR remained stable. ROM at the index level decreased from 10.6 ± 4.0° preoperatively to 9.3 ± 4.0° at the early follow-up (p = 0.03). The ROM at the index level remained unchanged from early follow-up to the final follow-up (9.3 ± 4.0° vs 9.5 ± 5.2°, p = 0.80). In subgroup analysis, larger changes of both COR-x and COR-y were related with decreased ROM.ConclusionsOur study illustrated that Bryan CDA could achieved favorable clinical and radiographic outcome over a minimal 10-year follow-up. The reduction of the flexion-extension ROM may be correlated with a more deviated postoperative COR. More attention should be paid to preoperative design and intraoperative technique to obtain a more native COR.

Establish a new parameter "horizontal view-axial angle" and explore its role in the treatment of atlantoaxial instability diseases.

The objective of the study is to establish a new parameter that can be clearly measured on x-ray images to complement the description of the sagittal alignment of the craniocervical junction. The authors anticipate that this new parameter will enhance surgeons' understanding of the sagittal alignment of the craniocervical junction and play a positive role in the guidance of intraoperative reduction and in the evaluation of postoperative outcomes of patients with atlantoaxial instability. From November 2018 to June 2020, a total of 159 asymptomatic subjects who underwent frontal and lateral cervical x-ray examination in the Second Affiliated Hospital of Soochow University were included in the study. Age, gender, previous spinal trauma, and disease history of each subject were recorded. After screening, 127 effective samples were finally obtained. When taking lateral cervical radiographs, all subjects placed their neck in a neutral position and looked straight ahead with both eyes. On the obtained lateral x-ray images, a straight line was drawn from the radix to the anterior clinoid process; another line was made along the posterior edge of the C2 vertebral body; and the angle between the two lines was measured, which was defined as the "horizontal view-axial angle." The angle formed by the tangent of the posterior edge of the C2 vertebra and C7 vertebral body is the "C2-C7 angle," which was used to describe the curvature of the lower cervical vertebra. The normal range of horizontal view-axial angle and its relationship with C2-7 angle were evaluated. The average C2-C7 angle of male subjects was (14.0° ± 7.4°), while that of female subjects was (11.09° ± 7.36°). The average horizontal view-axial angle of male subjects was (92.79° ± 4.52°), and that of female subjects was (94.29° ± 4.50°). Pearson correlation test showed that there was a significant negative correlation between horizontal view-axis angle and C2-C7 angle. For patients with atlantoaxial instability diseases, the horizontal view-axis angle is expected to be a sagittal parameter to guide the intraoperative reduction and evaluate postoperative outcomes.

Influence of the Neck Posture on the Masticatory Apparatus in Children

Aim: The study aimed to determine the peculiarities of influence of the neck posture on masticatory apparatus in children. Materials and Methods: We reviewed lateral cephalometric radiographs of 22 children, 10 girls, and 12 boys (mean age 12 years). Steiner cephalometric analysis and analysis of the upper cervical spine, which was available on corresponding cephalometric radiographs, were performed. In addition to cephalometric analysis, the angle between the McGregor line and the base of C2 (Oc-C2), the angle between the base of C1 and C2, and the angle between C2 and C5 were determined. Spearman’s correlation was computed to assess the relationship between neck sagittal plane posture and cephalometry results. Results: The strong correlation between sagittal neck posture and positioning of the incisor teeth was determined. We found, that the more lordotic is the neck and kyphotic or frontal tilted is the occipital position, the more the position of the incisors is altered towards open bite. Oc-C2 angle had a negative correlation with the Max1-NA (1-NA) angle (r (20) = - 0.63, p = .002), and 1uNA (r(20) = -0.65, p = .001), and positive with interincisor (II) angle (r (20) = 0.55, p = .007). C1-C2 angle had a negative correlation with 1uNA (r(20) = -0.50, p = .017). C2-C5 angle was found to have an opposite relation with incisors: negative correlation with II (r(20) = -0.55, p = .006), positive with Max1-NA (r(20) = 0.44, p = .038), Max1-SN (r (20) = 0.45, p = .031) and Mand1-NB (r(20) = 0.42, p = .048). The upper cervical vertebrae positioning in the sagittal plane is in strong relation with incisors positioning and can be the cause of open bite or vice versa. Conclusions: Based on cephalometry radiographs analysis we can consider the relation between the neck vertebrae posture and masticatory apparatus to be significant. Neck sagittal alignment is strongly related to the occipital tilt and has a strong correlation with incisors proclining, meaning the increase in spinal lordosis angle is related to forward occipital tilt and an increase in interincisor angle, resulting in upper incisor proclination.

Global Sagittal Spinal Compensation for Dropped Head Alignment.

This is a retrospective radiographic study of a consecutive series of cases in patients with dropped head syndrome (DHS) at a single tertiary referral center. The aim was to clarify the compensation among parameters of spinal sagittal alignment in patients with DHS. The treatment strategy for DHS should vary according to the types of global sagittal spinal alignment. However, theoretical evidence in consideration of spinal sagittal compensation against the dropped head condition is lacking. One hundred sixteen patients diagnosed with isolated neck extensor myopathy were enrolled. Radiographic measurements were made, including parameters of spinal sagittal alignment. The patients were divided into three groups according to sagittal spinal balance: C7SVA (sagittal vertical axis) ≥ +50mm (P-DHS; positive imbalanced DHS), -50mm ≤C7SVA <+50mm (B-DHS; balanced DHS), and C7SVA <-50mm (N-DHS; negative imbalanced DHS). Correlations among the various spinal parameters were analyzed. Among all types of DHS, there was no correlation between C2-C7 angle (C2-C7A) and T1 slope. In B-DHS, other correlations among the adjacent spinal segments were maintained. In N-DHS, there was no correlation between C2-C7A and TK, and in P-DHS, there was also no correlation between TK and lumbar lordosis. The loss of compensation at the cervicothoracic junction was observed in all DHS types. B-DHS showed decompensation only at the cervicothoracic junction. N-DHS presented additional decompensation of the thoracic spine, and P-DHS showed decompensation between the thoracic and lumbar spine. Evaluation of global sagittal spinal balance is important for determining global spinal compensation associated with DHS and when considering treatment strategy.

Cervical Lift-up Basket Laminoplasty after Resection of Spinal Intramedullary Tumors: A Finite Element Analysis and Clinical Image Evaluation.

Although reconstructive laminoplasty is commonly performed after resection of spinal intramedullary tumors of the cervical spine, its biomechanical rigidity of laminoplasty framework remains unclear. The objective of this study was to examine the structural reliability of our unique method of cervical lift-up basket laminoplasty by using computed tomography (CT)-based finite element analysis (FEA) and clinical radiological evaluation. A finite element model of cervical laminoplasty was created based on CT images using FEA software. Cervical lift-up basket laminoplasty (Basket) was compared with the standard style of open-door basket laminoplasty (Open-door). Clinical subjects for radiological evaluation comprised 33 patients who underwent cervical lift-up basket laminoplasty after resection of spinal intramedullary tumors. An FEA-equivalent stress histogram showed that stress was moderately dispersed around the basket. Virtual displacement of the spinous process of the Basket model was equivalent to that of the Open-door model in any direction of posterior-to-anterior, right-to-left, or top-to-bottom force. In the clinical analysis, radiological data with a minimum postoperative period of 6 months were obtained in a total of 28 out of 33 patients. No patients underwent revision surgery because of implant-related complications. No significant differences in C2-C7 angle or cervical tilt angle were observed between pre- and postoperatively. The structural rigidity of cervical lift-up basket laminoplasty was equivalent to the open-door style on the FEA. Clinical radiological evaluation suggested that there were no serious adverse events associated with cervical laminoplasty, although the longer postoperative follow-up is mandatory.

Laminoplasty on Kyphotic Cervical Alignments Suggests Poor Surgical Outcomes: A Comparative Finite Element Analysis of Laminoplasty on Different Alignments

Cervical laminoplasty is a useful for treatment for cervical myelopathy. However, this procedure has limitations for kyphotic cervical alignments. We used the finite element (FE) analysis and investigated the biomechanical changes in intact and laminoplasty models with lordosis, straight, and kyphosis cervical alignments. A three-dimensional FE model of the cervical spine (C2–C7) with ligaments was created from computer tomography. The model was modified with the following cobb angles (a) intact–lordotic model (intact–L; C2–C7 angle: −10°), (b) intact–straight model (intact–S; C2–C7 angle: 0°), and (c) intact–kyphotic model (intact–K; C2–C7 angle: 10°). The C3–C6 laminoplasty was conducted on the three intact models, represented by the laminoplasty–lordosis model (LM–L), laminoplasty–straight model (LM–S), and laminoplasty–kyphosis model (LM–K), respectively. Pure moment with compressive follower load of 100 N to represent the weight of the head/cranium and cervical muscle stabilization was applied to these models and the range of motion (ROM), annular stress, nucleus stress and facet forces were analyzed. ROM of intact–K and LM–K increased when compared to the other models. The LM–K had the highest mobility with 324% increase in ROM observed under extension, compared to LM–L. In addition, the annular stresses and nucleus stresses in intact–K and LM–K were higher compared to the other models. The maximum increase in annular stresses was about 309% in LM–K compared to the LM–L, observed at the C3–C4 segment. However, the facet contact forces were lower in the intact–K and LM–K, compared to the other models. Cases with cervical kyphosis alignment are at a disadvantage compared to cases with lordosis or straight alignment and should be treated with caution.

Clinical and Radiological Outcome in a Series of Patients Treated by Anterior Cervical Discectomy and Fusion: Retrospective Controlled Study With 2 Different Stand-Alone Cages.

Cervical spine balance and alignment targets after cervical spine surgery are poorly established in patients with cervical spine degenerative disease surgically treated by anterior cervical discectomy and fusion (ACDF). The objective of the study is to determine the correlation between radiological and clinical outcomes in patients surgically treated by ACDF with 2 different stand-alone cervical cages. Clinical outcomes were evaluated using visual analog scale (VAS), Neck Disability Index (NDI), Nurick Scale, and Japanese Orthopedic Association score for myelopathy. Radiological evaluation included cervical and segmental Cobb angles, cervical sagittal vertical axis (cSVA), T1 slope (T1s), C0-C2 angle, fusion rates, adjacent segment degeneration, and cage subsidence. A total of 80 patients were included with an average age of 53 years. There was a statistically significant improvement in both clinical and radiological evaluations. There was a statistical significant correlation between cervical pain on cervical VAS and cSVA. There was a significant correlation between postoperative T1s and cSVA, related to the improvement in cervical angles. There was no significant difference in rates of fusion, adjacent segment changes, or reoperation between both cervical cages, and there was a higher rate of subsidence in the Aleutian group. There were significant differences between both groups on postoperative NDI and VAS, but this difference is not maintained during follow-up. Cervical sagittal balance is directly related to clinical outcome in patients with cervical spine degenerative disease. Both cervical implants analyzed were comparable in clinical and radiological outcomes. There are important clinical and radiological parameters that should be taken into account for the analysis of the surgical outcome of patients treated by ACDF; this is one of the few studies that report the results with 2 different cervical cage designs.

Effect of facet joint distraction on the functional and radiological outcomes after anterior cervical disc replacement

ObjectiveThe purpose of this study is to explore: 1) whether the extent of facet joint distraction affects functional outcomes following single-level anterior cervical disc replacement (ACDR) for cervical spondylotic radiculopathy and 2) whether the extent of facet joint distraction correlates with the cervical sagittal parameters.MethodsWe performed a retrospective analysis on 70 patients who had undergone a single-level ACDR to treat cervical spondylotic radiculopathy between January 2014 and December 2018. Pre- and post-operative lateral cervical spine X-ray radiographs were collected to determine radiographic parameters, including C0-C2 angle, C2-C7 angle, C7 Slope (C7S), T1 Slope (T1S), C2–C7 sagittal vertical axis (SVA), C2-C7 range of motion (ROM), Segmental ROM, disc height (DH) and inter-facet distance (ID). And the extend of facet joint distraction was evaluated by the two indexes: degree of intervertebral distraction (DID) defined and degree of facet joint distraction (DFJD). The visual analog scale (VASneck) and the Neck Disability Index scores (NDI) were adopted to demonstrate functional outcomes. Patients with the functional outcome improvement below the average were set as the positive group in the receiver operating characteristic (ROC) curve analysis, to find an optimal cut-off value of extent of facet joint distraction.ResultsVASneck and NDI scores improved significantly from pre- to post-operation among the entire cohort, and DFJD had a statistically significant negative correlation with ΔVASneck (p < 0.001) and ΔNDI (p < 0.001). According to ROC curve analysis, the cut-off value of DFJD for differing the appropriate and excessive distraction groups was set at 29.16% (sensitivity = 70.73%, specificity = 67.86%). Between these two groups, the ΔT1S, ΔROM, ΔVASneck, and ΔNDI were significantly different (p < 0.05).ConclusionSingle-segment ACDR may improve the functional outcome of patients with cervical spondylotic radiculopathy. However, those whose DFJD was greater than 29.16% had worse VASneck and NDI scores, as well as a lower ΔT1S and a lower ΔROM.

Cervical Sagittal Alignment in Patients With Basilar Invagination.

Retrospective study. To present a morphological map of cervical sagittal alignment in basilar invagination (BI), a congenital anomaly of the craniovertebral junction, and contribute to a comprehensive understanding of cervical sagittal alignment in congenital cervical deformities. Ideal cervical sagittal alignment and surgical targets are debated by scholars. However, most of the literature focuses on the description of cervical sagittal alignment in acquired cervical diseases and normal subjects and few on congenital cervical spine deformities. This study analyzed cervical spine lateral radiographs of 87 BI patients and 98 asymptomatic subjects. They were analyzed for cranial, cervical spine, and thoracic inlet parameters. Patients with BI manifested significantly larger values for the following parameters than asymptomatic subjects: cranial tilt, cranial incidence angle, sagittal vertical axis (SVA) CGH-C7, C2-C7 angle, cervical tilt, and significantly smaller values for the following parameters: cranial slope, C0-C2 angle, C0-C7 angle, SVA C2-C7, spine tilt, thoracic inlet angle, and neck tilt. In the BI group, SVA C2-C7 was the cervical parameter most strongly correlated with the cranial, cervical spine, and thoracic inlet parameters, and was smaller in BI patients with fusion (atlanto-occipital assimilation) than in those without. A significant difference was observed between BI patients and asymptomatic subjects. BI patients have craniums tilted forward and downward, smaller upper cervical lordosis, larger lower cervical lordosis, and smaller thoracic inlet angle. In BI patients, the SVA C2-C7 is an important parameter in cervical sagittal alignment. In both individuals with congenital anomalies of the craniovertebral junction and the asymptomatic population, cervical spine alignment is significantly associated with cranial alignment, particularly thoracic inlet alignment.

Disc Height Narrowing Could Not Stabilize the Mobility at the Level of Cervical Spondylolisthesis: A Retrospective Study of 83 Patients with Cervical Single-Level Spondylolisthesis.

A retrospective study at a single academic institution. We aimed to understand the pathogenesis of cervical spondylolisthesis by analyzing whether narrowing of the disc height stabilizes the slipped disc level according to the degenerative cascade. According to Kirkaldy-Willis' degenerative cascade, the narrowing of the disc height at slipped level contributes to intervertebral stability in lumbar spondylolisthesis. Conversely, the pathogenesis of cervical spondylolisthesis is unknown due to a scarcity of reports on the condition. The images of 83 patients with cervical single-level spondylolisthesis were studied. We looked at 52 slipped levels for anterior slippage and 31 for posterior slippage. The imaging parameters included slippage in the neutral, flexed, and extended positions, axial facet joint orientation, sagittal facet slope, global cervical alignment, C2-C7 angle, C2-C7 sagittal vertical axis, range of motion (ROM), and slipped disc angle ROM. With the narrowing of the intervertebral disc height, slippage in the flexed position of both anterior and posterior spondylolisthesis increased. However, in both anterior and posterior spondylolisthesis, disc height narrowing did not show stability. The narrowing of the intervertebral disc height was found to be a risk factor for a translation of slippage of 1.8 mm or more in flexionextension motion in anterior spondylolisthesis in multivariate regression analysis. Narrowing the intervertebral disc height did not stabilize the translation of slippage in flexion-extension motion in cervical spondylolisthesis. Instead, narrowing of the disc height was associated with a translation of slippage of 1.8 mm or more in flexion-extension motion in cases of anterior slippage. Therefore, we discovered that degenerative cascade stabilization for cervical spondylolisthesis was difficult to achieve.

The Additional Economic Burden of Frailty in Adult Cervical Deformity Patients Undergoing Surgical Intervention.

The influence of frailty on economic burden following corrective surgery for the adult cervical deformity (CD) is understudied and may provide valuable insights for preoperative planning. To assess the influence of baseline frailty status on the economic burden of CD surgery. Retrospective cohort. CD patients with frailty scores and baseline and two-year Neck Disability Index data were included. Frailty score was categorized patients by modified CD frailty index into not frail (NF) and frail (F). Analysis of covariance was used to estimate marginal means adjusting for age, sex, surgical approach, and baseline sacral slope, T1 slope minus cervical lordosis, C2-C7 angle, C2-C7 sagittal vertical axis. Costs were derived from PearlDiver registry data. Reimbursement consisted of a standardized estimate using regression analysis of Medicare payscales for services within a 30-day window including length of stay and death. This data is representative of the national average Medicare cost differentiated by complication/comorbidity outcome, surgical approach, and revision status. Cost per quality-adjusted life-year (QALY) at two years was calculated for NF and F patients. There were 126 patients included. There were 68 NF patients and 58 classified as F. Frailty groups did not differ by overall complications, instance of distal junctional kyphosis, or reoperations (all P >0.05). These groups had similar rates of radiographic and clinical improvement by two years. NF and F had similar overall cost ($36,731.03 vs. $37,356.75, P =0.793), resulting in equivocal costs per QALYs for both patients at two years ($90,113.79 vs. $80,866.66, P =0.097). F and NF patients experienced similar complication rates and upfront costs, with equivocal utility gained, leading to comparative cost-effectiveness with NF patients based on cost per QALYs at two years. Surgical correction for CD is an economical healthcare investment for F patients when accounting for anticipated utility gained and cost-effectiveness following the procedure. III.

Cervical Spinous Process and Its Attached Muscles Maintain Lower Disk Lordosis: A Retrospective Study of 155 Patients Who Underwent Muscle-Preserving Double Laminectomies.

A retrospective study conducted at a single academic institution. This study compared the postoperative alignment of consecutive double laminectomies according to their decompression levels and investigated the influence of the extension unit of the spinous process and its attached muscles on postoperative alignment. Many reports have investigated bony and soft tissue factors as the causes of postoperative cervical alignment disorders. To-this-date, no other article has clarified the importance of the attached muscles between the spinous processes of C3 and C6 to maintain local cervical alignment. In total, 155 consecutive patients who underwent muscle-preserving consecutive double laminectomies for cervical spondylotic myelopathy from 2005 to 2013 were included in this study. The imaging parameters included the C2-C7 angle, range of motion, C2-C7 sagittal vertical axis (SVA), C7 slope, C2-C5 angle, C5-C7 angle, local disk angle caudal to the decompression level, and the disk height between C2/C3 and C7/Th1. The caudal disk angle of the decompression level decreased after consecutive double laminectomies, thus suggesting that the extension unit maintained the local lordosis at the lower disk of the decompression level. Postoperatively, in the C3-4 decompression cases, the C2-C7 angle decreased by 7.3°, and the C2-C7 SVA increased by 8.6 mm, thus indicating the appearance of an alignment disorder. Multivariate logistic regression analysis showed that cephalad laminectomy was a risk factor for C2-C7 angle decreases >10°. However, the postoperative recovery rate of Japanese Orthopedic Association scores after consecutive double laminectomies was reasonable, and the overall cervical alignment was well maintained in all decompression levels except C3-C4. The cervical extension unit maintained lordosis at the disk caudal to it. The extension unit was found to contribute more to the maintenance of lordosis of the entire cervical spine at the cephalad side.

Sagittal morphology of the cervical spine in adolescent idiopathic scoliosis: a retrospective case-control study.

To investigate the relationship between sagittal alignment and coronal deformity in patients with adolescent idiopathic scoliosis (AIS) through analysis of the spinal imaging data. Four hundred and fifty-four AIS patients who underwent anteroposterior and lateral radiography of the while spine were enrolled, and the spinal parameters of Cobb angle, cervical lordosis, C1-C2 angle, T1 slope, thoracic kyphosis, lumbar lordosis, sacral slope, pelvic tilt (PT), pelvic incidence (PI), cervical sagittal vertical axis (SVA), and spinal SVA were analyzed. The patients were divided into two groups according to the size of the Cobb angle: group A (Cobb angle ≤45°, n=414) and group B (Cobb angle >45°, n=40). In group A, the Cobb angle was in a medium negative correlation with the cervical lordosis angle (r=-0.637, P<0.001), a weak positive correlation (|r|<0.3, P<0.05) with C1-C2 angle, T1 slope and thoracic kyphosis. In group B, the Cobb angle was in a mild positive correlation (P<0.05) with PT (r=0.398) and PI (r=0.360). The cervical lordosis angle was significantly (P<0.05) different between male and female patients in both groups. In Group A, the cervical lordosis angle was in a significantly (P<0.01) positive correlation with the T1 slope (r=0.586), thoracic kyphosis (r=0.490), and sagittal vertical axis (r=0.135), and a significantly (P<0.01) negative correlation with cervical sagittal vertical axis (r=-0.128) and C1-C2 angle (r=-0.155). In group B, the cervical lordosis angle was in a significantly (P<0.05) positive correlation with T1 slope (r=0.661), thoracic kyphosis (r=0.608), lumbar lordosis (r=0.425), sacral slope (r=0.434), and sagittal vertical axis (r=0.335). In AIS patients with the Cobb angle ≤45º, a significant negative correlation exists between the cervical lordosis and the Cobb angle. The sagittal morphology of the cervical spine in AIS patients is affected by the spinal coronal deformity, which plays an important role in the treatment of AIS.

Effects of combined adjustable Halo-pelvic fixation brace on cervical spine alignment in patients with severe rigid spinal deformity

ObjectiveTo evaluate the effect of continuous traction with a combined adjustable Halo-pelvic fixation brace on the cervical spine alignment in patients with severe rigid spinal deformity and analyze its related factors.MethodsWe conducted a retrospective cohort study of 21 patients with severe rigid spinal deformity treated in our department between 2015 and 2019. All subjects received combined adjustable Halo-pelvic fixation brace traction before secondary orthopedic surgery. The influence of the Halo-pelvic fixation brace on the cervical spine alignment was evaluated by measuring the parameters of lateral cervical X-ray at three time points: before traction, at the end of traction, and 6 months after orthopedic surgery. The correlation between parameter changes and total traction duration was analyzed to explore factors influencing cervical alignment.ResultsThe C2L-C7L angle was 22.40 ± 15.91° before traction, which decreased to 5.91 ± 6.78° at the end of traction but increased to 14.51 ± 10.07° after orthopedic surgery (BT vs ET p < 0.005, ET vs AOS p < 0.005, BT vs AOS p < 0.005). Accordingly, C2L-C7U angle, C2L-C6L angle, C2L-C6U angle, C2L-C5L angle, C7 or T1 slope, C2-C7 SVA, SCA, C2-T1 Ha, C0 slope, and C0-C2 angle also changed similarly to C2L-C7L angle. Furthermore, moderate correlation was observed between C2L-C7L angle and total traction volume (r = 0.563, p = 0.008) and SCA and traction duration (r = 0.525, p = 0.015). However, no significant correlation was found between other cervical alignment parameters and total traction volume and traction duration.ConclusionsThe continuous traction of a combined adjustable Halo-pelvic fixation brace can affect the cervical spine alignment of patients with severe rigid spinal deformity and straighten the physiological curvature of the cervical spine. However, the sagittal alignment gradually recovers after the traction, without any adverse effects on the orthopedic surgery and global balance after the operation; therefore, this apparatus is worthy of wide application.

Analysis of Parameters That Can Predict the Cervical Sagittal Vertical Axis in Cervical Fusion Surgery

The absolute value of the cervical sagittal parameters cannot be guaranteed with certainty on all follow-up cervical radiographs. With the assumption that neck posture changes can occur at any time at each follow-up radiographic session, we examined whether the sagittal parameters change meaningfully and identified the factors most closely related to the C2-C7 sagittal vertical axis (SVA). We enrolled 200 patients who had undergone either anterior cervical fusion (n= 100) or posterior cervical fusion (n= 100). The craniovertebral angle (CVA), mandible angle (MA), occipital slope (Os), C2 slope (C2s), C7 slope (C7s), and C2-C7 SVA were measured on 2 different follow-up radiographs after surgery. The C2-C7 angle (C2-C7A) and changes (Δ) in the sagittal parameters between the 2 radiographs were then calculated. The ΔC2s and ΔCVA showed a very strong correlation with the ΔC2-C7 SVA (r= |0.70-0.93|). An independent t test showed a statistically significant difference for multiple sagittal parameters (i.e., ΔMA, ΔOs, ΔC2s, ΔC7s, and ΔCVA) between the large and small ΔC2-C7 SVA groups. In contrast, the change in the C2-C7A was without statistical significance. A stepwise multivariate regression analysis revealed a high adjusted R2 value (0.841) between the ΔC2-C7 SVA and 2 parameters (standardized coefficient: ΔCVA,-0.563; ΔC2s,-0.398). During cervical fusion surgery, the CVA was the most predictable parameter reflecting the C2-C7 SVA in various analyses. The upper cervical parameters (Os and C2s) provided more explanatory power regarding the C2-C7 SVA changes than did the lower cervical parameter (C7s) or the presence of cervical lordosis (C2-C7A).

Atlantoaxial stenosis after muscle-preserving selective laminectomy

There are few reports of degenerative atlantoaxial stenosis and new stenosis after cervical decompression. We experienced four cases of atlantoaxial stenosis after muscle-preserving selective laminectomy. We compared these four cases with no stenosis cases after long-term follow-up of selective laminectomy, as well as healthy subjects. A total of 1205 patients who underwent muscle-preserving selective laminectomy due to cervical disorders were included in this study. Postoperative atlantoaxial stenosis, which needed decompression, appeared in 4 cases, and 30 patients did not have radiological stenosis for more than 10 years after surgery. Twenty healthy volunteers were also used as controls. The radiographic parameters measured were C2-C7 angle, C2-C7 sagittal vertical axis (SVA), C2 slope, C7 slope, C2-C5 angle, C5-C7 angle, C1-C2 angle, and atlantodental interval (ADI). We measured the anterior-posterior (AP) diameters of the spinal cord (SC) and dural tube (Dura) at C1/C2 with sagittal MRI. In the cases of atlantoaxial stenosis, the AP of SC and Dura at C1/C2 were smaller preoperatively, and the residual space for SC (SAC) was also smaller. The preoperative ADI was significantly higher in patients with atlantoaxial stenosis, suggesting preoperative instability at C1/C2. Analysis of the ROC curve showed that patients with a preoperative SAC of less than 3.6 mm and an ADI of more than 1.35 mm were more likely to develop postoperative atlantoaxial stenosis. When we perform a muscle-preserving selective laminectomy, decompression of C1/C2 is suggested when the SAC at C1/C2 is less than 3.6 mm and the ADI is more than 1.35 mm.

Radiological Features in Type II Odontoid Fractures in Older Adults After High- and Low-Energy Trauma.

Retrospective study. Although type II odontoid fractures mainly occur due to high-energy trauma (HET), the number of odontoid type II fractures after low-energy trauma (LET) in the elderly is on the rise. However, there is a paucity of conclusive evidence on the relationship between trauma mechanism and cervical spine alignment in the elderly population. Consequently, we examined cervical alignment and osteoporotic and osteoarthritic patterns in elderly individuals (aged ≥65years) with type II odontoid fractures. We retrospectively assessed cervical spine alignment in 76 elderly individuals who experienced type II odontoid fractures after HET (n = 36) and LET (n = 40) between 2005 and 2020. Osteoporotic and osteoarthritic changes on computed tomography and cervical alignment parameters on sagittal plane radiographs were examined. Moderate and severe osteoporosis of the dens-body junction and osteoarthritis of the atlanto-odontoid joint were more prevalent in the LET than the HET group (P<.005). The anterior atlantodental interval (ADI) was significantly smaller in the LET group than in the HET group (.7 [.7] millimeter vs 1.2 [.8] mm; P=.003). An ADI equal 0mm indicative for anterior fusion of C1/C2 was present in 37.5% of patients of the LET group. The C0-C2 angle, C1-C2 lordosis, and C2-C7 sagittal vertical axis were significantly different (HET vs LET: 33.2 [7.2]° vs 41.6 [11.4]°, P=.005; 28.1 [7.0]° vs 34.0 [8.0]°, P=.002; and 16.1 [11.1] millimeter vs 27.1 [12.4] mm, P=.008; respectively). Significantly higher rates of osteoporotic and degenerative changes were observed after LET. Furthermore, previous cervical malalignment represents a risk factor for type II odontoid fractures after LET.

Determination of cutoff values on computed tomography and magnetic resonance images for the diagnosis of atlantoaxial instability in small-breed dogs.

ObjectiveTo determine cutoff values for the diagnosis of atlantoaxial instability (AAI) based on cross‐sectional imaging in small‐breed dogs.Study designRetrospective multicenter study.Sample populationClient‐owned dogs (n = 123) and 28 cadavers.MethodsDogs were assigned to three groups: a control group, a “potentially unstable” group, and an AAI‐affected group, according to imaging findings and clinical signs. The ventral compression index (VCI), cranial translation ratio (CTR), C1‐C2 overlap, C1‐C2 angle, atlantoaxial distance, basion‐dens interval, dens‐to‐axis length ratio (DALR), power ratio, and clivus canal angles were measured on CT or T2‐weighted magnetic resonance (MR) images. Receiver operating characteristic (ROC) analysis was performed to define cutoff values in flexed (≥25°) and extended (<25°) head positions.ResultsCutoff values for the VCI of ≥0.16 in extended and ≥0.2 in flexed head positions were diagnostic for AAI (sensitivity of 100% and 100%, specificity of 94.54% and 96.67%, respectively). Cutoff values for the other measurements were defined with a lower sensitivity (75%‐96%) and specificity (70%‐97%). A combination of the measurements did not increase the sensitivity and specificity compared with the VCI as single measurement.ConclusionCutoff values for several imaging measurements were established with good sensitivity and specificity. The VCI, defined as the ratio between the ventral and dorsal atlantodental interval, had the highest sensitivity and specificity in both head positions.Clinical significanceThe use of defined cutoff values allows an objective diagnosis of AAI in small‐breed dogs. The decision for surgical intervention, however, should remain based on a combination of clinical and imaging findings.

Progression of Ossification of Posterior Longitudinal Ligament After Anterior Cervical Discectomy and Fusion in Military Patients Exposed to Minor Trauma.

Ossification of the posterior longitudinal ligament (OPLL) can progress even after cervical spine surgery and may cause neurological injury as a result of minor trauma. The purpose of this study was to investigate the preventive factors associated with OPLL progression after anterior cervical discectomy and fusion (ACDF), a procedure commonly performed in clinical practice. We retrospectively investigated 295 male soldiers who underwent ACDF surgery between 2012 and 2017. Patients who were followed up for >12 months using dynamic radiography and computed tomography (CT) were included in the study. Radiological parameters investigated included OPLL progression, C2-C7 angles on dynamic radiography, segmental angles, C2-C7 cervical sagittal vertical axis (C2-C7 SVA), and the T1 slope. These parameters were measured preoperatively and 1 year postoperatively. A total of 49 patients were enrolled, and 10 patients were confirmed to have OPLL progression. Comparison between the OPLL progression and non-progression groups showed no statistically significant differences in pre- and postoperative cervical range of motion. However, statistically significant differences were observed in the postoperative neutral C2-C7 angle (progression -3.9°±6.4° vs. non-progression -13.4°±7.9°, p=0.001) and the SVA change (progression 5.8±7.9 mm vs. non-progression -3.7±6.3 mm, p=0.00). The cutoff values were -8.01° for the postoperative neutral C2-C7 angle and 1.4 mm for SVA changes. Increased SVA (>1.4 mm) and a small postoperative neutral C2-C7 angle (>-8.01°) 1 year after ACDF were associated with OPLL progression. It is important to be mindful of these factors during follow-up after ACDF, because additional surgical treatment may be necessary for OPLL progression due to neurological injury caused by minor trauma.