C18 Stationary Phase Research Articles

Development and Validation of an Analytical RP-HPLC Method for Simultaneous Estimation of Losartan and its Active Metabolite (EXP-3174) in Isolated Perfused Rat Liver

Background: The liver perfusion method is frequently used in drug pharmacokinetic studies and the various effects of drugs on liver tissue. The aim of this study was to establish and validate an analytical method using high-performance liquid chromatography to determine the simultaneous concentration of losartan and its active metabolite, EXP-3174, in an isolated perfused rat liver study. Method: An HPLC system with isocratic mode was used. Various chromatographic parameters were adjusted to develop and validate a method for determination of losartan and its active metabolite in liver perfusion media. Results: In this study, losartan and its active metabolite, EXP-3174, were separated using a C18 stationary phase, a mobile phase consisting of acetonitrile: phosphate buffer at a flow rate of 1 mL.min-1, and UV detection at 254 nm. Retention times for losartan and the metabolite were 10 and 16 minutes, respectively. Linearity from 25-250 ng.ml-1 was validated with acceptable accuracy and precision. The LOD and LOQ for losartan were 7.0 and 21.1 ng.ml-1, respectively. The LOD and LOQ for metabolite were 7.4 and 22.4 ng.ml-1, respectively. ChromGate® software was used to acquire and process the data. Conclusions: The optimized and validated technique was effectively used to analyze losartan and its active metabolite in isolated perfused rat liver.

Development of a simple, eco-friendly HPLC-DAD method for tulathromycin analysis: Ensuring stability and assessing greenness

The core objective of this analytical study was to develop a simple, green, and efficient high-performance liquid chromatography-diode array detector (HPLC-DAD) method for analyzing Tulathromycin (TUL) in pure powder and injection solution without the need for complex derivatization procedures. A simple liquid mobile solution of 15 mL of phosphate buffer (pH = 7.5) and 85 mL of methyl alcohol was passed through a Hypersil BDS C18 (4.6 mm × 25 cm, 5µ) stationary phase in an isocratic mode. The flow speed was controlled at 1.0 mL/min, and the DAD detector was adjusted at 210 nm because of the extremely weak UV absorption characteristic of TUL. TUL was well separated and quantified in 10 min. The HPLC-DAD forced degradation assay was carried out in dissimilar stressful environments concerning international conference for harmonization (ICH) protocols. TUL was linearly quantified from 1000.0 to 3000.0 µg·mL−1. The moderate sensitivity of the HPLC-DAD is attributed to the aliphatic, less conjugated chemical structure of TUL. The maximum degradation ratios occurred in acidic and oxidative environments with proportions of 20.11 % and 18.87 %, respectively. Furthermore, the eco-friendly merits of the HPLC-DAD method were confirmed via the application of two greenness approaches, specifically the analytical greenness tool (AGREE) and the green analytical procedure index (GAPI). The seven green subdivisions in the GAPI pictogram and the total score of 0.72 in the AGREE pictogram illustrate the greenness appraisal of the RP-HPLC-DAD stability method. The innovative RP-HPLC–DAD method is the first sustainable stability-demonstrating assay for TUL in the co-existence of its degradation products in variable stressful environments.

Selectivity comparison of acetonitrile-methanol-water ternary mobile phases on an octadecylsiloxane-bonded silica stationary phase.

The solvation parameter model was used in this study to investigate various intermolecular interactions that influence retention on the standard C18 stationary phase for the solvent system acetonitrile:methanol (ACN:MeOH, 1:1). In comparison to the organic mobile phase modifiers acetonitrile, acetone, methanol, 2-propanol, and tetrahydrofuran, the solvent strength for the ACN:MeOH (1:1) solvent system was evaluated. To facilitate the interpretation of various intermolecular interactions that contribute to retention on a standard C18 stationary phase for the solvent system ACN:MeOH (1:1), system maps were constructed and compared with those of acetone, tetrahydrofuran, acetonitrile, 2-propanol, and methanol. The solvation parameter models were constructed for the ternary solvent system ACN:MeOH (1:1)-water, and in the models constructed, the coefficient of determination values were from 0.998 to 0.999, the Fisher statistic values for the models were from 1687 to 4015, and the standard error of the estimate values ranged from 0.022 to 0.029. The solvent system ACN:MeOH (1:1) has retention properties more similar to methanol than acetonitrile, indicating methanol's influence is more dominant.

Phytochemical Analysis of Pinus cembra Heartwood-UHPLC-DAD-ESI-MSn with Focus on Flavonoids, Stilbenes, Bibenzyls and Improved HPLC Separation.

The heartwood of the Swiss Stone Pine, Pinus cembra L., has been scarcely investigated for secondary metabolites for a long period of time. Considering age and relative simplicity of heartwood investigations dating back to the 1940s to 1960s, we conducted the first investigation of P. cembra heartwood by HPLC, using UHPLC-DAD-ESI-MSn and HPLC-DAD techniques in combination with isolation and NMR spectroscopy, with focus on stilbenes, bibenzyls and flavonoids. Analytical problems in the HPLC analysis of Pinus stilbenes and flavonoids on reversed stationary phases were also challenged, by comparing HPLC on pentafluorophenyl (PFP) and C18 stationary phases. Seven flavonoids (1, 2, 3, 7, 8, 11, 12), four stilbenes (4, 6, 10, 13), two bibenzyls (5, 9), three fatty acids (14, 16, 17) and one diterpenic acid (15) were detected in an ethanolic extract of Pinus cembra heartwood. HPLC comparison of reversed stationary phases in HPLC showed that the antifungal, antibacterial and chemosensitizing dihydropinosylvin monomethyl ether (9) and pinosylvin monomethyl ether (10) can be separated on PFP, but not on C18 material, when eluting with a screening gradient of 20-100% acetonitrile. Flavonoid separation showed additional benefits of combining analyses on different stationary phases, as flavonoids 7 and 8 could only be separated on one of two C18 stationary phases. Earlier phytochemical results for heartwood investigations were shown to be mostly correct, yet expandable. Substances 5 to 12 were found in alignment with these references, proving remarkable phytochemical analyses at the time. Evidence for the described presence of pinobanksin could not be found. Substances 1 to 4 and 13 have to our knowledge not yet been described for P. cembra.

Liquid Chromatography Tandem Mass Spectrometric Method Development and Validation for the Quantification of Orlistat in Biological Matrices

A specific, linear and precise liquid chromatographic-tandem mass spectrometric method was established and validated for the quantitation of orlistat in sample plasma. Zorbax C18 (4.6 mm i.d.× 50.0 mm; 5.0 μm) stationary phase was utilized to achieve chromatography elution, through a flowing rate of 0.90 mL/min. Isocratic elution was done using methanol, acetonitrile and 0.10% v/v HCOOH in a fraction of 80:10: 10 v/v/v as the mobile phasic system. For drug and internal standard separation, the precipitation extraction technique used acetonitrile as solvent. A triple quadrupole mass detector was employed for the quantification of ions. Electrospray ionization in a positive ionizing method, which was executed in multiple reaction monitorings (MRM) with parent/product ion transitions of m/z 496.4→337.31 for orlistat and 506.23→57.07 for amprenavir internal standard. The calibration graph was executed between the concentrations of 4.75–190.0 ng/mL and the resulting equation was y = 0.0058x + 0.0022 with r2 value of more than 0.99. Orlistat recovery values were found to be more than 93.65%, and its accuracy, measured in relative error, was in the range of -4.48 to 3.49%. Accuracy findings, sensitivity and recovery values of orlistat in the sample plasma for the established technique evidences its importance in pharmacokinetic and bioequivalence study.

Mechanistic study of ultrasound-assisted chromatography using plastic and stainless steel columns

Based on the previous ultrasound-assisted chromatography (UAC) studies on plastic and stainless steel (SS) columns, this study explores the UAC mechanism by comparatively analyzing ultrasound effects on plastic and SS columns with C18 stationary phase when separating a mixture of polycyclic aromatic hydrocarbons (PAHs) under various ultrasound intensities. The results showed a substantial difference in H values between the PEEK and SS columns under the influence of ultrasound agitation. Specifically, for the pyrene peak, as the ultrasonic intensity increased from 0% to 100% of 900 W, the H values of the SS column slightly rose from 8.82 μm to 9.86 μm. Conversely, the corresponding values for the PEEK column exhibited a significant 12-fold increase from 11.5 μm to 134 μm. The findings demonstrated poor penetration of ultrasound energy through the SS column, and the temperature rise of the medium induced by the ultrasound was the primary contributing factor to PAH separation. However, ultrasound easily penetrated through the plastic column, resulting in acoustic cavitation within the C18 polyether ether ketone (PEEK) column. Cavitation induced heat generation and contributed to a decrease in retention time and the magnitude of peak broadening or distortion, depending on the specific ultrasonic energy. Based on the estimated change in inlet temperature of the PEEK column due to an acoustic effect, the comparison with temperature effects under non-sonic conditions consistently demonstrated a stronger acoustic effect in reducing the retention time, by 2–9%, depending on specific peaks and pairs. We revisited the previously described separation mechanism of ultrasound-assisted ion chromatography and conjoined with our findings to infer and establish a thorough explanation for the previously unexplained separation mechanism of chiral separation and size exclusion chromatography by UAC using SS columns.

One-pot synthesis of a poly(styrene-acrylic acid) copolymer-modified silica stationary phase and its applications in mixed-mode liquid chromatography

As modified ligands with a wide range of sources, abundant functional groups, and good biocompatibility, polymers have been widely used in the development of silica-based chromatographic stationary phases. In this study, a poly(styrene-acrylic acid) copolymer-modified silica stationary phase (SiO2@P(St-b-AA)) was prepared via one-pot free-radical polymerization. In this stationary phase, styrene and acrylic acid were used as functional repeating units for polymerization and vinyltrimethoxylsilane (VTMS) was used as a silane coupling agent to link the copolymer and silica. Various characterization methods, such as Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), N2 adsorption-desorption analysis, and Zeta potential analysis, confirmed the successful preparation of the SiO2@P(St-b-AA) stationary phase, which had a well-maintained uniform spherical and mesoporous structure. The retention mechanisms and separation performance of the SiO2@P(St-b-AA) stationary phase in multiple separation modes were then evaluated. Hydrophobic and hydrophilic analytes as well as ionic compounds were selected as probes for different separation modes, and changes in the retention of the analytes under various chromatographic conditions, including different methanol or acetonitrile contents and buffer pH values, were investigated. In reversed-phase liquid chromatography (RPLC) mode, the retention factors of alkyl benzenes and polycyclic aromatic hydrocarbons (PAHs) on the stationary phase decreased with increasing methanol content in the mobile phase. This finding could be attributed to the hydrophobic and π-π interactions between the benzene ring and analytes. The retention changes of alkyl benzenes and PAHs revealed that the SiO2@P(St-b-AA) stationary phase, similar to the C18 stationary phase, exhibited a typical reversed-phase retention behavior. In hydrophilic interaction liquid chromatography (HILIC) mode, as the acetonitrile content increased, the retention factors of hydrophilic analytes gradually increased, and a typical hydrophilic interaction retention mechanism was inferred. In addition to hydrophilic interaction, the stationary phase also demonstrated hydrogen-bonding and electrostatic interactions with the analytes. Compared with the C18 and Amide stationary phases prepared by our groups, the SiO2@P(St-b-AA) stationary phase exhibited excellent separation performance for the model analytes in the RPLC and HILIC modes. Owing to the presence of charged carboxylic acid groups in the SiO2@P(St-b-AA) stationary phase, exploring its retention mechanism in ionic exchange chromatography (IEC) mode is of great importance. The effect of the mobile phase pH on the retention time of organic bases and acids was further studied to explore the electrostatic interaction between the stationary phase and charged analytes. The results revealed that the stationary phase has weak cation exchange ability toward organic bases and electrostatically repels organic acids. Moreover, the retention of organic bases and acids on the stationary phase was influenced by the analyte structure and mobile phase. Thus, the SiO2@P(St-b-AA) stationary phase could provide multiple interactions, as demonstrated by the separation modes described above. The SiO2@P(St-b-AA) stationary phase showed excellent performance and reproducibility in the separation of mixed samples with different polar components, indicating that it has promising application potential in mixed-mode liquid chromatography. Further investigation of the proposed method confirmed its repeatability and stability. In summary, this study not only described a novel stationary phase that could be used in RPLC, HILIC, and IEC modes but also presented a facile "one-pot" preparation approach that could provide a new route for the development of novel polymer-modified silica stationary phases.

Comparative study for the retention of some benzodiazepines in reversed-phase liquid chromatography using C8, C18, C6H5 and CN stationary phases

The retention behavior of six benzodiazepines (alprazolam, bromazepam, diazepam, flunitrazepam, medazepam, and nitrazepam) was studied using four different stationary phases, under reversed-phase mechanism in high-performance liquid chromatography. Four stationary phases were used for evaluating the retention of these compounds at fixed temperature. Functional dependences of the retention factor on the content of the organic modifier (methanol, or acetonitrile) in the composition of mobile phase were calculated. The extrapolated values of the retention factor for zero content of the organic modifier in mobile phase were higher for acetonitrile than for methanol for all studied compounds and for the four types of stationary phases.

A facile approach to undecylenic acid-functionalized stationary phases for per aqueous liquid chromatography

Green chromatography techniques using low-toxic mobile phase are getting increasingly attention in recent years. The core is developing stationary phases that possess adequate retention and separation under the mobile phase of high content water. Using thiol-ene click chemistry, an undecylenic acid-bonded silica stationary phase (UAS) was prepared in a facile manner. Elemental analysis (EA), solid-state 13C NMR spectroscopy and Fourier transform infrared spectrometry (FT-IR) confirmed the successful preparation of UAS. The synthesized UAS was employed for per aqueous liquid chromatography (PALC), which uses little organic solvent during separation. Due to the hydrophilic carboxy, thioether group and hydrophobic alkyl chains of the UAS, various categories of compounds (including nucleobases, nucleosides, organic acids and basic compounds) with different properties can achieve enhanced separation under the mobile phase of high content water compared with commercial C18 and silica stationary phases. Overall, our present UAS stationary phase shows excellent separation ability toward highly polar compounds and meets the requirements of green chromatography.

Method development for the LC-MS/MS determination of C60 and C70 fullerenes and their functionalized derivatives in airborne particulate matter, settled dust and soot

Fullerenes are organic contaminants of growing concern due to their increasing use for industrial purposes, in addition to their emission by natural and anthropogenic combustion sources.Their analysis is made tricky by their unique chemical structure and their acute hydrophobicity. Thus, analytical developments are required for further environmental evaluation of their occurrence. This article presents such a development for the analysis of C60 and C70 fullerenes together with three of their functionalized derivatives in airborne particulate matter, settled dust and soot from diesel exhaust.Pressurized Liquid Extraction was performed with toluene and acetonitrile as extraction solvents, and gave mean extraction recoveries from 75% to 95% for the five fullerenes investigated.Liquid Chromatography was optimized in terms of stationary phase and mobile phase to obtain a good separation of the compounds. Optimal separation of the compounds by liquid chromatography were obtained using a C18 stationary phase and a mixture of toluene - acetonitrile as mobile phase in gradient mode.The mass spectrometry detection method was also optimized with a comparison of three ionization sources: Electrospray ionization (ESI), Atmospheric Pressure Chemical Ionization (APCI) and Atmospheric Pressure PhotoIonization (APPI). APPI gave the most sensitive and repeatable detection with instrumental limits of quantification (LOQ) down to 10 pg injected. MS/MS was used in pseudo-MRM mode to enhance signal intensity.The optimized LC-APPI-MS/MS method was then validated and applied to indoor PM10 and household dust samples, and to a Diesel Particulate Matter Reference Material. None of these samples showed concentrations of fullerenes above the method quantification limits.

Design of β-Alanine-Derived Novel C18 Stationary Phase Containing Embedded Urea and Amide Groups for the Separation of Versatile Analytes.

Novel stationary phases have been emerging recently. A β-alanine-derived embedded urea and amide group-containing C18 phase (Sil-Ala-C18) was prepared for the first time. The media were packed into a 150 × 2.1 mm HPLC column, and the newly designed column was evaluated with the Tanaka and Neue test protocols in reversed-phase liquid chromatography (RPLC) separation mode. Moreover, it was characterized by the Tanaka test protocol in hydrophilic interaction chromatography (HILIC) separation mode. The new phase was characterized by elemental analysis, attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and solid-state 13C cross-polarization magic angle spinning (CP/MAS) NMR spectroscopy at variable temperatures. The chromatographic evaluation involved very good separation of nonpolar shape-constrained isomers, polar and basic compounds in RPLC, and highly polar compounds in HILIC compared to the commercial reference columns. The Sil-Ala-C18 phase was able to separate the challenging β- and γ-isomers of tocopherol. The phase was also successfully applied for the separation of the isomers of tocopherol (vitamin E) and capsaicinoids from real samples of chili peppers (Capsicum spp.) in RPLC and ascorbic acid (vitamin C) in HILIC.

Validation of a liquid chromatography-tandem mass spectrometry method for simultaneous quantification of N,N-dimethylacetamide and N-monomethylacetamide in pediatric plasma.

N,Na-dimethylacetamide is an excipient used in intravenous busulfan formulations, a drug used in hematopoietic stem cell transplantation conditioning. The aim of this study was to develop and validate a liquid chromatography-tandem mass spectrometry method for simultaneous quantification of N,N-dimethylacetamide, and its metabolite N-monomethylacetamide in plasma from children receiving busulfan. A 4μl aliquot of patient plasma was extracted using 196μl 50% methanol solution and quantified against calibrators prepared in the extraction solvent given negligible matrix effects across three concentrations. 9 [H2 ]-N,N-dimethylacetamide was used as an internal standard. Separation of N,N-dimethylacetamide and N-monomethylacetamide was achieved using a Kinetex EVO C18 stationary phase (100mm × 2.1mm × 2.6μm) running an isocratic mobile phase of 30% methanol containing 0.1% formic acid at a flow of 0.2ml/min over 3.0 min. The injection volume was1μl. Calibration curves for N,N-dimethylacetamide and N-monomethylacetamide were linear up to 1200 and 200μg/L, respectively, with a lower limit of quantification 1μg/L for both analytes. Calibrator accuracy and precision were within±10% of the test parameters across four concentration levels. Analytes were stable over 14 days at three different storage conditions. This method was successfully applied to measure N,N-dimethylacetamide and N-monomethylacetamide concentrations in a total of 1265 plasma samples from 77 children.

Separation of ampicillin on polar-endcapped phase: Development of the HPLC method to achieve its correct dosage in cardiac surgery

AbstractThe accurate, simple, and selective reversed phase high performance liquid chromatography (RP-HPLC) has been established and validated for the determination of an antibiotic ampicillin (AMP) in human blood plasma. The SPE extraction was used for the sample preparation. Chromatographic separation was accomplished by a mobile phase containing 15 mM monopotassium phosphate solution of pH 3.3 and methanol (75:25, v/v) in an isocratic mode at a flow rate of 1.4 mL min−1 at 30 °C. The separation was evaluated on a column with a new polar-endcapped C18 stationary phase Arion® Polar C18 or well-known phase Luna® Omega Polar C18. Excellent linearity (R2 0.9998) was shown over range 10–300 mg L−1 with mean percentage recovery 90%. Peak shapes were symmetrical in both columns, Arion® Polar C18 and Luna® Omega Polar C18, with asymmetry factor of 1.0 and 1.4, tailing factor of 1.0 and 1.2, and retention factor of 4.6 and 5.6, respectively. The Arion® Polar C18 was almost 1.4-fold more effective than Luna® Omega Polar C18 phase. The LOQ for ampicillin was achieved 10 mg L−1 for Luna® Omega Polar C18 and 5 mg L−1 for Arion® Polar C18 using 20 µL of a solution containing 0.24 mg mL−1 of cephalexin as an internal standard.A number of articles dealing with the determination of ampicillin is limited, therefore, this study showed the HPLC method suitable for the determination of AMP in human blood plasma from patient who underwent elective cardiac surgical revascularization. In addition, the determination of AMP was also performed for the first time using an Arion® Polar C18 column, which effectively separated AMP from other compounds present in human blood plasma. This new polar-endcapped phase can help in separation of polar antibiotics or other polar compounds, which are unsuccessfully separated on conventional C18 column, and thus can help during method development.

A stationary phase with a positively charged surface allows for minimizing formic acid concentration in the mobile phase, enhancing electrospray ionization in LC-MS proteomic experiments.

The default choice of mobile phase acidifier for bottom-up LC-MS proteomic analyses is 0.10% formic acid because of its decent acidity, decent ion pairing ability, and low suppression of electrospray ionization. In recent years, state-of-the-art columns have been designed specifically to provide efficient separation even when using an MS-friendly mobile phase of low ionic strength. Despite this, no attempts have been made to improve the sensitivity of the MS-based analytical methods by reducing the amount of formic acid in the mobile phase. In this study, we evaluated the effect of reduced formic acid concentration in the mobile phase on the chromatographic behavior and MS response of peptides when separated using columns packed with a C18 stationary phase with a positively charged surface. Using 0.01% formic acid in the mobile phase maintained excellent chromatographic performance and increased MS signal response compared to the standard of 0.10%. The enhanced MS response translated to about 50% improved peptide identifications depending on the complexity and amount of sample injected. The increased retention of peptides at a reduced formic acid concentration was directly proportional to the number of acidic residues in the peptide sequence. The study was carried out by covering a spectrum of protein samples with varied complexity using analytical flow, micro-, and nanoflow regimes to expand the applicability in routine practice.

Development and validation of HPLC-FLD method for aflatoxin M1 determination in milk and dairy products

Abstract Milk and dairy products are the most consumed foods in human diet and their safety is in the attention centre of control authorities. Aflatoxin M1 (AFM1) is a dangerous toxin that can occur in milk and dairy products as a metabolite formed from aflatoxin B1 contained in contaminated animal feed. Therefore, the aim of this study was to develop and validate a reliable method for the determination of AFM1 content in milk and dairy products based on HPLC with fluorescence detection employing immunoaffinity columns (IAC) pre-treatment. Optimal chromatographic separation of AFM1 was achieved using a water/acetonitrile mixture (80/20, v/v) as a mobile phase, column with C18 stationary phase maintained at 25 °C, and fluorescence detection at excitation wavelengths of 360 nm and emission of 440 nm. Efficacy of AFM1 extraction from the samples was found to be influenced by the elution agent composition. The best results were obtained using 1.25 mL of acetonitrile/methanol (3/2, v/v) and 1.25 mL of water. Validation parameters of the proposed method met the criteria set by the European legislation with the limits of detection and quantification at 0.002 and 0.007 µg/kg, respectively. Also, suitability of the method was confirmed by its application for AFM1 determination in certified reference material. Finally, the method was applied for AFM1 determination in 25 milk and dairy products collected in Slovakia; the AFM1 content was below the limit of quantification. It was concluded that the method is suitable for AFM1 content monitoring in milk and dairy products.

Single-run UHPLC-MS/MS method for simultaneous quantification of endogenous steroids and their phase II metabolites in serum for anti-doping purposes

Anti-doping rule violations related to the abuse of endogenous anabolic androgenic steroids can be currently discovered by the urinary steroidal module of Athlete Biological Passport. Since this powerful tool is still subjected to some limitations due to various confounding factors altering the steroid profile, alternative strategies have been constantly proposed. Among these, the measurement of blood concentrations of endogenous steroid hormones by LC-MS is currently of increasing interest in anti-doping, bringing significant advantages for the detection of testosterone abuse in females and in individuals with deletion of UGT2B17 enzyme. Although various research groups have made significant efforts in method development, there is currently no accepted or harmonized anti-doping method for quantitative analysis of the various testosterone doping markers in blood. In this study we present a UHPLC-MS/MS method for the quantification of major circulating steroid hormones together with an extended panel of glucuro- and sulpho-conjugated phase II metabolites of androgens. Chromatographic setup was optimized by comparing the performance of three different C18 stationary phases and by the careful selection of mobile phases with the aim of separating all the target steroids, including numerous isomeric/isobaric compounds. MS parameters were fine-tuned to obtain the sensitivity needed for measuring the target analytes, that show specific serum concentrations ranging from low pg/mL for less abundant compounds to μg/mL for sulpho-conjugated steroids. Finally, sample preparation protocol was developed for the extraction of steroid hormones from 200 μL of serum and the performance was evaluated in terms of extraction recovery and matrix effect. The final method was then applied to authentic serum samples collected from healthy volunteers (40 males and 40 females) at the Blood Bank of the City of Health and Science University Hospital of Turin. The analysis of these samples allowed to obtain results on serum concentrations of the targeted steroids, with particular emphasis on previously undiscovered phase II metabolites, such as the isomers of 5-androstane-3,17-diol glucuronide. This preliminary application also enabled measuring dihydrotestosterone sulphate in male samples, efficiently separating this analyte from its isomer, epiandrosterone sulphate, which circulates in blood at high concentrations.The promising results of this study are encouraging for the measurement of blood steroid profile markers in serum and plasma samples for Athlete Biological Passport purposes.

Mobile-Phase Contributions to Organic-Solvent Excess Adsorption and Surface Diffusion in Reversed-Phase Liquid Chromatography.

Fast transport of retained analytes in reversed-phase liquid chromatography occurs through surface diffusion in the organic-solvent (OS)-enriched interfacial "ditch" region between the hydrophobic stationary phase and the water (W)-OS mobile phase. Through molecular dynamics simulations that recover the OS excess adsorption isotherms of a typical C18-stationary phase for methanol and acetonitrile, we explore the relation between OS properties, OS excess adsorption, and surface diffusion. The emerging molecular-level picture attributes the mobile-phase contribution to surface diffusion to the hydrogen-bond capability and the eluting power of the OS. The higher affinity of methanol for the formation of W-OS hydrogen bonds at the soft, hydrophobic surface presented by the bonded-phase (C18) chains reduces the OS excess and the related viscosity drop in the ditch. The lower eluting power of methanol, however, translates to increased bonded-phase contacts for analytes, which can increase their mobility gain from surface diffusion above the gain observed with acetonitrile.

A Sensitive Ultrahigh-Performance Liquid Chromatography/Tandem Mass Spectrometry Method for the Simultaneous Analysis of Phytocannabinoids and Endocannabinoids in Plasma and Brain.

Introduction: Δ9-tetrahydrocannabinol (THC) and cannabidiol (CBD) are major chemical constituents of cannabis, which may interact either directly or indirectly with the endocannabinoid and endocannabinoid-like ("paracannabinoid") systems, two lipid-based signaling complexes that play important roles in physiology. Legislative changes emphasize the need to understand how THC and CBD might impact endocannabinoid and paracannabinoid signaling, and to develop analytical approaches to study such impact. In this study, we describe a sensitive and accurate method for the simultaneous quantification of THC, its main oxidative metabolites [11-hydroxy-Δ9-THC (11-OH-THC) and 11-nor-9-carboxy-Δ9-THC (11-COOH-THC)], CBD, and a representative set of endocannabinoid [anandamide and 2-arachidonoyl-sn-glycerol (2-AG)] and paracannabinoid [palmitoylethanolamide (PEA) and oleoylethanolamide (OEA)] compounds. Analyte separation relies on the temperature-dependent shape selectivity properties of polymerically bonded C18 stationary phases. Materials and Methods: Analytes are extracted from tissues using acetonitrile precipitation followed by phospholipid removal. The ultrahigh-performance liquid chromatography/tandem mass spectrometry protocol utilizes a commercially available C18 polymeric-bonded phase column and a simple gradient elution system. Results: Ten-point calibration curves show excellent linearity (R2>0.99) over a wide range of analyte concentrations (0.02-500 ng/mL). Lowest limits of quantification are 0.05 ng/mL for anandamide, 0.1 ng/mL for 11-OH-THC and OEA, 0.2 ng/mL for THC and CBD, 0.5 ng/mL for 11-COOH-THC, 1.0 ng/mL for 2-AG, and 2.0 ng/mL for PEA. The lowest limits of detection are 0.02 ng/mL for anandamide, 0.05 ng/mL for 11-OH-THC and OEA, 0.1 ng/mL for THC and CBD, 0.2 ng/mL for 11-COOH-THC, 0.5 ng/mL for 2-AG, and 1.0 ng/mL for PEA. Conclusions: An application of the method is presented, which showed that phytocannabinoid administration elevates endocannabinoid levels in plasma and brain of adolescent male and female mice.

Development and Validation of a Reversed-Phase HPLC Method with UV Detection for the Determination of L-Dopa in Vicia faba L. Broad Beans.

L-Dopa (LD), a substance used medically in the treatment of Parkinson's disease, is found in several natural products, such as Vicia faba L., also known as broad beans. Due to its low chemical stability, LD analysis in plant matrices requires an appropriate optimization of the chosen analytical method to obtain reliable results. This work proposes an HPLC-UV method, validated according to EURACHEM guidelines as regards linearity, limits of detection and quantification, precision, accuracy, and matrix effect. The LD extraction was studied by evaluating its aqueous stability over 3 months. The best chromatographic conditions were found by systematically testing several C18 stationary phases and acidic mobile phases. In addition, the assessment of the best storage treatment of Vicia faba L. broad beans able to preserve a high LD content was performed. The best LD determination conditions include sun-drying storage, extraction in HCl 0.1 M, chromatographic separation with a Discovery C18 column, 250 × 4.6 mm, 5 µm particle size, and 99% formic acid 0.2% v/v and 1% methanol as the mobile phase. The optimized method proposed here overcomes the problems linked to LD stability and separation, thus contributing to the improvement of its analytical determination.

Preparation of polar embedded C18 stationary phase for efficient separation of peptides and proteins in high performance liquid chromatography

Peptides and proteins have great therapeutic potential, and owing to their unique biological properties, their separation is very challenging. A polar embedded C18 stationary phase was prepared by functionalization of porous silica monolith particles with N-3-(trimethoxysilyl) propyl stearamide. The stationary phase was packed in narrow bore column (100 × 2.1 mm) and evaluated for the separation of peptides and proteins in HPLC. Number of theoretical plates (N) as high as 520,000 and 340,000 plates/meter were obtained for peptides and proteins respectively. The separation performance of C18-amide column was compared with four commercial amide columns i.e. Ascentis Express RP-Amide, Accucore 150 Amide, TSKgel Amide-80, and XBridge Amide column. The performance of C18-amide column was much better than these commercial amide columns in terms of efficiency and resolution. Owing to high efficiency and good resolution for peptides and proteins separation, C18-amide column could be used as alternative to expansive commercial columns.