C-terminal Actin Research Articles

Binding of glyceraldehyde-3-phosphate dehydrogenase to G-actin promotes the transnitrosylation reaction

In this study, we investigated formation of the complex between glyceraldehyde-3-phosphate dehydrogenase (GAPDH) and actin and the possibility of nitrosyl group transfer between GAPDH and actin. A complex of GAPDH with beta-actin was isolated from lysates of HEK293T cells using immunoprecipitation with antibodies against GAPDH or against beta-actin. The treatment of the cells with H2O2 or NO donor did not affect the formation of the complex. Investigation of the interaction between purified GAPDH and muscle alpha-actin showed that GAPDH interacts better with globular (G-) actin than with fibrillary actin, and oxidation/reduction of GAPDH does not affect this interaction. S-nitrosylated GAPDH (GAPDH-SNO) was partially reactivated in the presence of G-actin, which was accompanied by denitrosylation of GAPDH and sulfenation of G-actin. The sulfenated cysteine residue in G-actin was identified by MALDI-TOF MS analysis as C-terminal Cys374. Based on the properties of nitrosothiols, we assume that the cysteine-sulfenic acid in actin is a product of spontaneous hydrolysis of S-nitrosylated cysteine residue. The obtained results suggest that Cys374 in actin is S-nitrosylated during the incubation with GAPDH-SNO (transnitrosylation reaction). The transfer of the NO-group from GAPDH-SNO to the C-terminal Cys374 of actin suggests that upon interaction with GAPDH, the C-terminus of actin is located in the active center of GAPDH in the proximity to the catalytic Cys152. It is possible that the ability of GAPDH-SNO to nitrosylate actin contributes to the redox regulation of actin-controlled signaling pathways.

Actin flow-dependent and -independent force transmission through integrins

Integrin-dependent adhesions mediate reciprocal exchange of force and information between the cell and the extracellular matrix. These effects are attributed to the "focal adhesion clutch," in which moving actin filaments transmit force to integrins via dynamic protein interactions. To elucidate these processes, we measured force on talin together with actin flow speed. While force on talin in small lamellipodial adhesions correlated with actin flow, talin tension in large adhesions further from the cell edge was mainly flow-independent. Stiff substrates shifted force transfer toward the flow-independent mechanism. Flow-dependent force transfer required talin's C-terminal actin binding site, ABS3, but not vinculin. Flow-independent force transfer initially required vinculin and at later times the central actin binding site, ABS2. Force transfer through integrins thus occurs not through a continuous clutch but through a series of discrete states mediated by distinct protein interactions, with their ratio modulated by substrate stiffness.

Actin Flow Dependent and Independent Force Transmission in Integrin-Mediated Adhesions

Integrin-mediated adhesions are essential for multicellular life because of their ability to both apply force to and sense the mechanical properties of the extracellular matrix. These effects are attributed to the “focal adhesion clutch”, in which moving actin filaments transmit force to integrins via dynamic protein interactions. To understand mechanotransduction through integrins, we simultaneously measured force on talin together with rates of actin flow by combining a previously developed talin FRET tension sensor with quantitative actin speckle microscopy. While force on talin in small lamellipodial adhesions correlated with actin flow, force on talin in large adhesions in the lamella was mainly flow-independent. Stopping actin flow blocked force transmission in lamellipodia but not lamellar adhesions. This indicates there are two unique types of force transfer in integrin based adhesions, one that is actin flow-dependent and one that is actin flow-independent. Flow-dependent force transfer required talin's C-terminal actin binding site, ABS3, whereas flow-independent force transfer required vinculin and the central actin binding site, ABS2. Mutation of these sites identified distinct functions in force transmission, cell spreading and mechanosensing. Together, these results revealed that the focal adhesion clutch is a transient structure that mediates events at the cell edge prior to arrest of actin filaments and establishment of stable adhesions that are the primary force-transmitting structures.

Ezrin interacts with S100A4 via both its N- and C-terminal domains.

Ezrin belongs to the ERM (ezrin, radixin, moesin) protein family that has a role in cell morphology changes, adhesion and migration as an organizer of the cortical cytoskeleton by linking actin filaments to the apical membrane of epithelial cells. It is highly expressed in a variety of human cancers and promotes metastasis. Members of the Ca2+-binding EF-hand containing S100 proteins have similar pathological properties; they are overexpressed in cancer cells and involved in metastatic processes. In this study, using tryptophan fluorescence and stopped-flow kinetics, we show that S100A4 binds to the N-terminal ERM domain (N-ERMAD) of ezrin with a micromolar affinity. The binding involves the F2 lobe of the N-ERMAD and follows an induced fit kinetic mechanism. Interestingly, S100A4 binds also to the unstructured C-terminal actin binding domain (C-ERMAD) with similar affinity. Using NMR spectroscopy, we characterized the complex of S100A4 with the C-ERMAD and demonstrate that no ternary complex is simultaneously formed with the two ezrin domains. Furthermore, we show that S100A4 co-localizes with ezrin in HEK-293T cells. However, S100A4 very weakly binds to full-length ezrin in vitro indicating that the interaction of S100A4 with ezrin requires other regulatory events such as protein phosphorylation and/or membrane binding, shifting the conformational equilibrium of ezrin towards the open state. As both proteins play an important role in promoting metastasis, the characterization of their interaction could shed more light on the molecular events contributing to this pathological process.

Tailor-made ezrin actin binding domain to probe its interaction with actin in-vitro.

Ezrin, a member of the ERM (Ezrin/Radixin/Moesin) protein family, is an Actin-plasma membrane linker protein mediating cellular integrity and function. In-vivo study of such interactions is a complex task due to the presence of a large number of endogenous binding partners for both Ezrin and Actin. Further, C-terminal actin binding capacity of the full length Ezrin is naturally shielded by its N-terminal, and only rendered active in the presence of Phosphatidylinositol bisphosphate (PIP2) or phosphorylation at the C-terminal threonine. Here, we demonstrate a strategy for the design, expression and purification of constructs, combining the Ezrin C-terminal actin binding domain, with functional elements such as fusion tags and fluorescence tags to facilitate purification and fluorescence microscopy based studies. For the first time, internal His tag was employed for purification of Ezrin actin binding domain based on in-silico modeling. The functionality (Ezrin-actin interaction) of these constructs was successfully demonstrated by using Total Internal Reflection Fluorescence Microscopy. This design can be extended to other members of the ERM family as well.

Metavinculin Induced Changes at the Actin Interprotomer Contacts and the Mechanism of Resulting Severing

Vinculin is a ubiquitously expressed adhesion protein of cell-matrix and cell-cell junctions. A larger splice-isoform of vinculin, metavinculin, is specifically expressed in cardiac and smooth muscles where it co-localizes with vinculin. Metavinculin has a 68 amino acid insert at its C-terminal actin binding tail (metavinculin tail: MVT). Mutations in the MVT insert are associated with disrupted intercalated disc organization and dilated cardiomyopathies, suggesting a distinct and important role for this isoform in cardiac cells. In vitro, metavinculin was shown to sever and organize actin filaments into fine meshworks while vinculin bundles them. Therefore, we focused on characterizing the structural changes MVT induces in F-actin and the severing activity of MVT. By using mutagenesis, cross-linking and site-directed labeling, we determined that MVT causes changes in the actin interprotomer contacts and dynamics. Specifically, the spectra of acrylodan attached to cysteine residues engineered in dynamic loops of actin -D-loop, W-loop, and C-terminus- are changed in the presence of MVT indicating a rearrangement of actin-actin contacts. Enhanced excimers fluorescence due to pyrenes attached to cysteines 265 and 374 shows that MVT binding affects mainly lateral actin contacts. By using a seeded actin elongation assay as a reporter of severing by MVT, we confirmed that MVT has a biphasic mode of actin severing. At partial decoration with MVT -as defined by co-pelleting of MVT-actin complexes- we observed increasing amounts of filament severing. At higher decoration, above 60%, MVT had a stabilizing effect on filaments. Our work enhances our understanding of MVT induced severing and changes in actin filaments structure, which appears to be important for the physiological role of this tissue-specific vinculin isoform.

The effect of ADF/cofilin and profilin on the dynamics of monomeric actin

The main goal of the work was to uncover the dynamical changes in actin induced by the binding of cofilin and profilin. The change in the structure and flexibility of the small domain and its function in the thermodynamic stability of the actin monomer were examined with fluorescence spectroscopy and differential scanning calorimetry (DSC). The structure around the C-terminus of actin is slightly affected by the presence of cofilin and profilin. Temperature dependent fluorescence resonance energy transfer measurements indicated that both actin binding proteins decreased the flexibility of the protein matrix between the subdomains 1 and 2. Time resolved anisotropy decay measurements supported the idea that cofilin and profilin changed similarly the dynamics around the fluorescently labeled Cys-374 and Lys-61 residues in subdomains 1 and 2, respectively. DSC experiments indicated that the thermodynamic stability of actin increased by cofilin and decreased in the presence of profilin. Based on the information obtained it is possible to conclude that while the small domain of actin acts uniformly in the presence of cofilin and profilin the overall stability of actin changes differently in the presence of the studied actin binding proteins. The results support the idea that the small domain of actin behaves as a rigid unit during the opening and closing of the nucleotide binding pocket in the presence of profilin and cofilin as well. The structural arrangement of the nucleotide binding cleft mainly influences the global stability of actin while the dynamics of the different segments can change autonomously.

A Visual Assay to Monitor T6SS-mediated Bacterial Competition

Type VI secretion systems (T6SSs) are molecular nanomachines allowing Gram-negative bacteria to transport and inject proteins into a wide variety of target cells1,2. The T6SS is composed of 13 core components and displays structural similarities with the tail-tube of bacteriophages3. The phage uses a tube and a puncturing device to penetrate the cell envelope of target bacteria and inject DNA. It is proposed that the T6SS is an inverted bacteriophage device creating a specific path in the bacterial cell envelope to drive effectors and toxins to the surface. The process could be taken further and the T6SS device could perforate other cells with which the bacterium is in contact, thus injecting the effectors into these targets. The tail tube and puncturing device parts of the T6SS are made with Hcp and VgrG proteins, respectively4,5.The versatility of the T6SS has been demonstrated through studies using various bacterial pathogens. The Vibrio cholerae T6SS can remodel the cytoskeleton of eukaryotic host cells by injecting an "evolved" VgrG carrying a C-terminal actin cross-linking domain6,7. Another striking example was recently documented using Pseudomonas aeruginosa which is able to target and kill bacteria in a T6SS-dependent manner, therefore promoting the establishment of bacteria in specific microbial niches and competitive environment8,9,10.In the latter case, three T6SS-secreted proteins, namely Tse1, Tse2 and Tse3 have been identified as the toxins injected in the target bacteria (Figure 1). The donor cell is protected from the deleterious effect of these effectors via an anti-toxin mechanism, mediated by the Tsi1, Tsi2 and Tsi3 immunity proteins8,9,10. This antimicrobial activity can be monitored when T6SS-proficient bacteria are co-cultivated on solid surfaces in competition with other bacterial species or with T6SS-inactive bacteria of the same species8,11,12,13.The data available emphasized a numerical approach to the bacterial competition assay, including time-consuming CFU counting that depends greatly on antibiotic makers. In the case of antibiotic resistant strains like P. aeruginosa, these methods can be inappropriate. Moreover, with the identification of about 200 different T6SS loci in more than 100 bacterial genomes14, a convenient screening tool is highly desirable. We developed an assay that is easy to use and requires standard laboratory material and reagents. The method offers a rapid and qualitative technique to monitor the T6SS-dependent bactericidal/bacteriostasis activity by using a reporter strain as a prey (in this case Escherichia coli DH5α) allowing a-complementation of the lacZ gene. Overall, this method is graphic and allows rapid identification of T6SS-related phenotypes on agar plates. This experimental protocol may be adapted to other strains or bacterial species taking into account specific conditions such as growth media, temperature or time of contact.

A Visual Assay to Monitor T6SS-mediated Bacterial Competition

Type VI secretion systems (T6SSs) are molecular nanomachines allowing Gram-negative bacteria to transport and inject proteins into a wide variety of target cells1,2. The T6SS is composed of 13 core components and displays structural similarities with the tail-tube of bacteriophages3. The phage uses a tube and a puncturing device to penetrate the cell envelope of target bacteria and inject DNA. It is proposed that the T6SS is an inverted bacteriophage device creating a specific path in the bacterial cell envelope to drive effectors and toxins to the surface. The process could be taken further and the T6SS device could perforate other cells with which the bacterium is in contact, thus injecting the effectors into these targets. The tail tube and puncturing device parts of the T6SS are made with Hcp and VgrG proteins, respectively4,5. The versatility of the T6SS has been demonstrated through studies using various bacterial pathogens. The Vibrio cholerae T6SS can remodel the cytoskeleton of eukaryotic host cells by injecting an "evolved" VgrG carrying a C-terminal actin cross-linking domain6,7. Another striking example was recently documented using Pseudomonas aeruginosa which is able to target and kill bacteria in a T6SS-dependent manner, therefore promoting the establishment of bacteria in specific microbial niches and competitive environment8,9,10. In the latter case, three T6SS-secreted proteins, namely Tse1, Tse2 and Tse3 have been identified as the toxins injected in the target bacteria (Figure 1). The donor cell is protected from the deleterious effect of these effectors via an anti-toxin mechanism, mediated by the Tsi1, Tsi2 and Tsi3 immunity proteins8,9,10. This antimicrobial activity can be monitored when T6SS-proficient bacteria are co-cultivated on solid surfaces in competition with other bacterial species or with T6SS-inactive bacteria of the same species8,11,12,13. The data available emphasized a numerical approach to the bacterial competition assay, including time-consuming CFU counting that depends greatly on antibiotic makers. In the case of antibiotic resistant strains like P. aeruginosa, these methods can be inappropriate. Moreover, with the identification of about 200 different T6SS loci in more than 100 bacterial genomes14, a convenient screening tool is highly desirable. We developed an assay that is easy to use and requires standard laboratory material and reagents. The method offers a rapid and qualitative technique to monitor the T6SS-dependent bactericidal/bacteriostasis activity by using a reporter strain as a prey (in this case Escherichia coli DH5α) allowing a-complementation of the lacZ gene. Overall, this method is graphic and allows rapid identification of T6SS-related phenotypes on agar plates. This experimental protocol may be adapted to other strains or bacterial species taking into account specific conditions such as growth media, temperature or time of contact.

Influence of RET/PTC1 and RET/PTC3 oncoproteins in radiation-induced papillary thyroid carcinomas on amounts of cytoskeletal protein species

Radiation-induced human papillary thyroid carcinomas (PTCs) show a high prevalence of fusions of the RET proto-oncogene to heterologous genes H4 (RET/PTC1) and ELE1 (RET/PTC3), respectively. In contrast to the normal membrane-bound RET protein, aberrant RET fusion proteins are constitutively active oncogenic cytosolic proteins that can lead to malignant transformation of thyroid epithelia. To detect specific tumor-associated protein changes that reflect the effect of RET/PTC fusion proteins, we analyzed normal thyroid tissues, thyroid tumors of the RET/PTC1 and RET/PTC3 type and their respective lymph node metastases by a combination of high-resolution two-dimensional electrophoresis and matrix-assisted laser desorption/ionization-mass spectrometry. PTCs without RET rearrangements served as controls. Several cytoskeletal protein species showed quantitative changes in tumors and lymph node metastases harboring RET/PTC1 or RET/PTC3. We observed prominent C-terminal actin fragments assumedly generated by protease cleavages induced due to enhanced amounts of the active actin-binding protein cofilin-1. In addition, three truncated vimentin species, one of which was proven to be headless, were shown to be highly abundant in tumors and metastases of both RET/PTC types. The observed protein changes are closely connected with the constitutive activation of RET-rearranged oncoproteins and reflect the importance to elucidate disease-related typical signatures on the protein species level.

Structure and Function of a G-actin Sequestering Protein with a Vital Role in Malaria Oocyst Development inside the Mosquito Vector

Cyclase-associated proteins (CAPs) are evolutionary conserved G-actin-binding proteins that regulate microfilament turnover. CAPs have a modular structure consisting of an N-terminal adenylate cyclase binding domain, a central proline-rich segment, and a C-terminal actin binding domain. Protozoan parasites of the phylum Apicomplexa, such as Cryptosporidium and the malaria parasite Plasmodium, express small CAP orthologs with homology to the C-terminal actin binding domain (C-CAP). Here, we demonstrate by reverse genetics that C-CAP is dispensable for the pathogenic Plasmodium blood stages. However, c-cap(-) parasites display a complete defect in oocyst development in the insect vector. By trans-species complementation we show that the Cryptosporidium parvum ortholog complements the Plasmodium gene functions. Purified recombinant C. parvum C-CAP protein binds actin monomers and prevents actin polymerization. The crystal structure of C. parvum C-CAP shows two monomers with a right-handed beta-helical fold intercalated at their C termini to form the putative physiological dimer. Our results reveal a specific vital role for an apicomplexan G-actin-binding protein during sporogony, the parasite replication phase that precedes formation of malaria transmission stages. This study also exemplifies how Plasmodium reverse genetics combined with biochemical and structural analyses of orthologous proteins can offer a fast track toward systematic gene characterization in apicomplexan parasites.

In vivo actin cross-linking induced by Vibrio cholerae type VI secretion system is associated with intestinal inflammation

Type VI secretion systems (T6SSs) have recently been recognized as potential virulence determinants of many Gram-negative bacterial pathogens. Although mechanistic studies are lacking, T6SS-dependent phenotypes can be observed in various animal models of infection. Presumably translocation of T6SS effectors into target cells is involved in virulence, but few such effectors have been identified. A hallmark of T6SS function is the in vitro secretion of Hcp and VgrG proteins, which are thought to form part of an extracellular secretion apparatus. One well-characterized effector domain is the C-terminal actin cross-linking domain (ACD) of the VgrG-1 protein, constitutively secreted by the T6SS of Vibrio cholerae strain V52. Previous work indicated that translocation of VgrG-1 occurred only after endocytic uptake of bacteria into host cells. VgrG-1-induced actin cross-linking impaired phagocytic activity of host cells, eventually causing cell death. To determine whether V. cholerae T6SS is functional during animal infection, derivatives of V52 were used to infect infant mice. In this infection model a diarrheal response occurred, and actin cross-linking could be detected. These host responses were dependent on a functional T6SS and on the ACD of VgrG-1. Gene expression and histologic studies showed innate immune activation and immune cell infiltration in the intestinal lumen. The T6SS-dependent inflammatory response was also associated with increased recovery of V. cholerae from the intestine. We conclude that the T6SS of V52 induces an inflammatory diarrhea that facilitates replication of V. cholerae within the intestine.

Translocation of a Vibrio cholerae Type VI Secretion Effector Requires Bacterial Endocytosis by Host Cells

The type VI secretion system (T6SS) is a virulence mechanism common to several Gram-negative pathogens. In Vibrio cholerae, VgrG-1 is required for T6SS-dependent secretion. VgrG-1 is also secreted by T6SS and displays a C-terminal actin crosslinking domain (ACD). Using a heterologous reporter enzyme in place of the ACD, we show that the effector and secretion functions of VgrG-1 are genetically dissociable with the ACD being dispensable for secretion but required for T6SS-dependent phenotypes. Furthermore, internalization of bacteria is required for ACD translocation into phagocytic target cells. Inhibiting bacterial uptake abolishes actin crosslinking, while improving intracellular survival enhances it. Otherwise resistant nonphagocytic cells become susceptible to T6SS-mediated actin crosslinking when engineered to take up bacteria. Our results support a model for translocation of VgrG C-terminal effector domains into target cell cytosol by a process that requires trafficking of bacterial cells into an endocytic compartment where translocation is triggered by an unknown signal.

New Aspects of the Spontaneous Polymerization of Actin in the Presence of Salts

The mechanism of salt-induced actin polymerization involves the energetically unfavorable nucleation step, followed by filament elongation by the addition of monomers. The use of a bifunctional cross-linker, N,N′-(1,4-phenylene)dimaleimide, revealed rapid formation of the so-called lower dimers (LD) in which actin monomers are arranged in an antiparallel fashion. The filament elongation phase is characterized by a gradual LD decay and an increase in the yield of “upper dimers” (UD) characteristic of F-actin. Here we have used 90° light scattering, electron microscopy, and N,N′-(1,4-phenylene)dimaleimide cross-linking to reinvestigate relationships between changes in filament morphology, LD decay, and increase in the yield of UD during filament growth in a wide range of conditions influencing the rate of the nucleation reaction. The results show irregularity and instability of filaments at early stages of polymerization under all conditions used, and suggest that an earlier documented coassembling of LD with monomeric actin contributes to the initial disordering of the filaments rather than to the nucleation of polymerization. The effects of the type of G-actin-bound divalent cation (Ca2+/Mg2+), nucleotide (ATP/ADP), and polymerizing salt on the relation between changes in filament morphology and progress in G-actin-to-F-actin transformation show that ligand-dependent alterations in G-actin conformation determine not only the nucleation rate but also the kinetics of ordering of the filament structure in the elongation phase. The time courses of changes in the yield of UD suggest that filament maturation involves cooperative propagation of “proper” interprotomer contacts. Acceleration of this process by the initially bound MgATP supports the view that the filament-destabilizing conformational changes triggered by ATP hydrolysis and Pi liberation during polymerization are constrained by the intermolecular contacts established between MgATP monomers prior to ATP hydrolysis. An important role of contacts involving the DNase-I-binding loop and the C-terminus of actin is proposed.

Nebulin Interacts with CapZ and Regulates Thin Filament Architecture within the Z-Disc

The barbed ends of actin filaments in striated muscle are anchored within the Z-disc and capped by CapZ; this protein blocks actin polymerization and depolymerization in vitro. The mature lengths of the thin filaments are likely specified by the giant "molecular ruler" nebulin, which spans the length of the thin filament. Here, we report that CapZ specifically interacts with the C terminus of nebulin (modules 160-164) in blot overlay, solid-phase binding, tryptophan fluorescence, and SPOTs membrane assays. Binding of nebulin modules 160-164 to CapZ does not affect the ability of CapZ to cap actin filaments in vitro, consistent with our observation that neither of the two C-terminal actin binding regions of CapZ is necessary for its interaction with nebulin. Knockdown of nebulin in chick skeletal myotubes using small interfering RNA results in a reduction of assembled CapZ, and, strikingly, a loss of the uniform alignment of the barbed ends of the actin filaments. These data suggest that nebulin restricts the position of thin filament barbed ends to the Z-disc via a direct interaction with CapZ. We propose a novel molecular model of Z-disc architecture in which nebulin interacts with CapZ from a thin filament of an adjacent sarcomere, thus providing a structural link between sarcomeres.

NMR structure of the talin C-terminal actin binding site

NMR structure of the talin C-terminal actin binding site

Proteomic profiling of fibroblasts reveals a modulating effect of extracellular calumenin on the organization of the actin cytoskeleton

CREC proteins constitute a family of EF-hand calcium binding proteins localized to the secretory pathway. Calumenin is the only member known to be secreted. Recently, it was shown that thrombin-activated thrombocytes liberate calumenin, which also is found in atherosclerotic lesions but not in normal vasculature. To study the possible effects of calumenin extracellularly, we used proteomic profiling of fibroblasts cultured in absence and in presence of calumenin. Using 2-DE and MS/MS, we show that normal fibroblasts contain several 28-29-kDa N-terminal and a 16-kDa C-terminal fragment of beta- or gamma-actin. Extracellularly added calumenin decreases the levels of both the N-terminal and C-terminal actin fragments, and, in addition, decreases the expression level of septin 2, which interacts with the actin cytoskeleton and is involved in cytokinesis. Labeling of S-phase fibroblasts with bromo-2'deoxy-uridine indicates that calumenin added to the medium also modulates the cell cycle. Our study thus indicates that calumenin may have an autocrine or a paracrine effect on the cells in its vicinity, and, therefore, may be involved in the pathophysiology of thrombosis or in wound healing.

Mapping and Consensus Sequence Identification for Multiple Vinculin Binding Sites within the Talin Rod

The interaction between the cytoskeletal proteins talin and vinculin plays a key role in integrin-mediated cell adhesion and migration. Three vinculin binding sites (VBS1-3) have previously been identified in the talin rod using a yeast two-hybrid assay. To extend these studies, we spot-synthesized a series of peptides spanning all the alpha-helical regions predicted for the talin rod and identified eight additional VBSs, two of which overlap key functional regions of the rod, including the integrin binding site and C-terminal actin binding site. The talin VBS alpha-helices bind to a hydrophobic cleft in the N-terminal vinculin Vd1 domain. We have defined the specificity of this interaction by spot-synthesizing a series of 25-mer talin VBS1 peptides containing substitutions with all the commonly occurring amino acids. The consensus for recognition is LXXAAXXVAXX- VXXLIXXA with distinct classes of hydrophobic side chains at positions 1, 4, 5, 8, 9, 12, 15, and 16 required for vinculin binding. Positions 1, 8, 12, 15, and 16 require an aliphatic residue and will not tolerate alanine, whereas positions 4, 5, and 9 are less restrictive. These preferences are common to all 11 VBS sequences with a minor variation occurring in one case. A crystal structure of this variant VBS peptide in complex with the vinculin Vd1 domain reveals a subtly different mode of vinculin binding.

Activation of Myosin Va Function by Melanophilin, a Specific Docking Partner of Myosin Va

It is known that melanophilin is a myosin Va-targeting molecule that links myosin Va and the cargo vesicles in cells. Here we found that melanophilin directly activates the actin-activated ATPase activity of myosin Va and thus its motor activity. The actin-activated ATPase activity of the melanocyte-type myosin Va having exon-F was significantly activated by melanophilin by 4-fold. Although Rab27a binds to myosin Va/melanophilin complex, it did not affect the melanophilin-induced activation of myosin Va. Deletion of the C-terminal actin binding domain and N-terminal Rab binding domain of melanophilin resulted in no change in the activation of the ATPase by melanophilin, indicating that the myosin Va binding domain (MBD) is sufficient for the activation of myosin Va. Among MBDs, the interaction of MBD-2 with exon-F of myosin Va is critical for the binding of myosin Va and melanophilin, whereas MBD-1 interacting with the globular tail of myosin Va plays a more significant role in the activation of myosin Va ATPase activity. This is the first demonstration that the binding of the cargo molecule directly activates myosin motor activity. The present finding raises the idea that myosin motors are switched upon their binding to the cargo molecules, thus avoiding the waste of ATP consumption.

A Vinculin Binding Domain from the Talin Rod Unfolds to Form a Complex with the Vinculin Head

The cytoskeletal protein talin plays a key role in activating integrins and in coupling them to the actin cytoskeleton. Its N-terminal globular head, which binds beta integrins, is linked to an extended rod having a C-terminal actin binding site and several vinculin binding sites (VBSs). The NMR structure of residues 755-889 of the rod (containing a VBS) is shown to be an amphipathic four-helix bundle with a left-handed topology. A talin peptide corresponding to the VBS binds the vinculin head; the X-ray crystallographic structure of this complex shows that the residues which interact with vinculin are buried in the hydrophobic core of the talin fragment. NMR shows that the interaction involves a major structural change in the talin fragment, including unfolding of one of its helices, making the VBS accessible to vinculin. Interestingly, the talin 755-889 fragment binds more than one vinculin head molecule, suggesting that the talin rod may contain additional as yet unrecognized VBSs.