C-terminal Carboxyl Research Articles

Dimethyl labeling of N-terminal amines allows unambiguous identification of protein crosslinks

Protein crosslinks induced through either deliberate enzymatic oxidation or reactive oxidants (oxidative eustress/distress), are associated with multiple human pathologies including atherosclerosis, Alzheimer’s and Parkinson’s diseases. In many cases, the nature of the crosslinks, their position(s) either within (intramolecular) or between (intermolecular) polypeptide chains, and concentrations are unclear. Although limited data are available from specific antibodies, detailed characterization of protein crosslinks is often performed by mass spectrometric analysis of peptides from proteolytic digestion. Such analyses are challenging due to the low concentration of these species, and the complexity of their fragment ion spectra when compared to non-crosslinked species. We hypothesized that highly efficient and specific chemical amine labelling of the two N-termini in crosslinked peptides (compared to the single N-terminus of linear peptides), using “light” and “heavy” isotope-labeled reagents would facilitate identification, validation and quantification of crosslinks. This method was compared to a previous enzyme-catalyzed 18O C-terminal carboxylate labelling approach. N-terminal amine dimethyl labelling is shown to have major advantages over the 18O-approach including high labelling yields (92-100%) and well-defined mass spectrometric isotope distribution patterns. This approach has allowed identification of novel dityrosine crosslinks between pair of tyrosine (Tyr, Y) residues in photo-oxidized β-casein (Y195-Y195, Y195-Y208, Y208-Y208), and α-synuclein exposed to nitrosative stress (Y39-Y39, Y39-Y125, Y39-Y133, Y133-Y136). This approach is also applicable to disulfide bond mapping, with 15 of 17 disulfides in serum albumin readily detected. These data indicate that dimethyl labelling is a highly versatile and efficient approach for the site-specific identification of oxidation- and nitration-induced crosslinks in proteins.

Carboxy-terminal polyglutamylation regulates signaling and phase separation of the Dishevelled protein

Polyglutamylation is a reversible posttranslational modification that is catalyzed by enzymes of the tubulin tyrosine ligase-like (TTLL) family. Here, we found that TTLL11 generates a previously unknown type of polyglutamylation that is initiated by the addition of a glutamate residue to the free C-terminal carboxyl group of a substrate protein. TTLL11 efficiently polyglutamylates the Wnt signaling protein Dishevelled 3 (DVL3), thereby changing the interactome of DVL3. Polyglutamylation increases the capacity of DVL3 to get phosphorylated, to undergo phase separation, and to act in the noncanonical Wnt pathway. Both carboxy-terminal polyglutamylation and the resulting reduction in phase separation capacity of DVL3 can be reverted by the deglutamylating enzyme CCP6, demonstrating a causal relationship between TTLL11-mediated polyglutamylation and phase separation. Thus, C-terminal polyglutamylation represents a new type of posttranslational modification, broadening the range of proteins that can be modified by polyglutamylation and providing the first evidence that polyglutamylation can modulate protein phase separation.

Photocatalytic Decarboxylative Allylation of α-Amino Acids and Peptides under Metal-Free Conditions.

We developed an organophotoredox catalytic system to facilitate the decarboxylative allylation coupling process concerning α-amino acids and related C-terminal carboxylate peptides using Morita-Baylis-Hillman adducts as allylic precursors. This metal-free method operates under mild conditions and is compatible with various amino acids. The versatility of this protocol, particularly in chemical biology research, has been preliminarily demonstrated through the ligation of bioactive peptide chains.

Amino acid – Squaramide conjugates as anion binding receptors

Squaramides have garnered significant attention as anion binding motifs and have become a popular supramolecular synthon owing to their unique structural features and propensity to form strong hydrogen bond interactions particularly with anionic species. However, their conjugation to biomaterials to form biomimetic receptors remains underexplored even though such species would combine the biocompatibility of amino acids with the strong hydrogen bonding propensity of squaramides and may prove useful across broad applications in the chemical and biological sciences. In this study, we present the design and synthesis of a series of amino acid – squaramide conjugates (AASqs) 1 – 5, as well as studying their anion recognition properties. 1–5 were prepared using facile synthetic methods and their anion binding properties were investigated via 1H NMR titrations with a range of anions in 0.5 % H2O in DMSO‑d6. Our findings constitute a cautionary tale, where it was shown that the presence of the C-terminal carboxylic acid of the amino acids complicate the binding behaviour of the receptors towards anions. We show that the C-terminal carboxylates compete with other anionic species for the squaramide binding site leading to complex binding equilibria in solution. However, upon esterification of the C-termini to afford compound 5, a simplification of the binding profile was observed and was easily fitted to a 1:1 (Receptor:Anion) binding stoichiometry. This work sheds light on the potential of AASqs as anion binding receptors whilst underlining the influence of the C-terminus on anion recognition. It also provides a direct solution to mitigate the complex binding behaviour of 1–4 through esterification and will prove useful in the design of more complex squaramide bioconjugates.

Unusual Guide-binding Pockets in RNA-targeting pAgo Nucleases

Argonaute nucleases use small nucleic acid guides to recognize and degrade complementary nucleic acid targets. Most prokaryotic Argonautes (pAgos) recognize DNA targets and may play a role in cell immunity against invader genetic elements. We have recently described two related groups of pAgo nucleases that have distinct specificity for DNA guides and RNA targets (DNA > RNA pAgos). Here, we describe additional pAgos from the same clades of the pAgo tree and demonstrate that they have the same unusual nucleic acid specificity. The two groups of DNA > RNA pAgos have non-standard guide-binding pockets in the MID domain and differ in the register of guide DNA binding and target cleavage. In contrast to other pAgos, which coordinate the 5′-end of the guide molecule by their C-terminal carboxyl, DNA > RNA pAgos have an extended C-terminus located away from the MID pocket. We show that modifications of the C-terminus do not affect guide DNA binding, but inhibit cleavage of complementary and mismatched RNA targets by some DNA > RNA pAgos. Our data suggest that the unique C-terminus found in DNA > RNA pAgos can modulate their catalytic properties and can be used as a target for pAgo modifications.

Biophysical and structural analyses of the interaction between the SHANK1 PDZ domain and an internal SLiM.

The PDZ (Postsynaptic density protein-95[PSD-95]/Discs-large) domain, prevalent as a recognition module, has attracted significant attention given its ability to specifically recognize ligands with consensus motifs (also termed PDZ binding motifs [PBMs]). PBMs typically bear a C-terminal carboxylate as a recognition handle and have been extensively characterized, whilst internal ligands are less well known. Here we characterize a short linear motif (SLiM) - EESTSFQGP - as an internal PBM based on its strong binding affinity towards the SHANK1 PDZ domain (SHANK1656-762 hereafter referred to as SHANK1). Using the acetylated analogue Ac-EESTSFQGP-CONH2 as a competitor for the interaction of SHANK1 with FAM-Ahx-EESTSFQGP-CONH2 or a typical fluorophore-labelled C-terminal PBM - GKAP - FITC-Ahx-EAQTRL-COOH - the internal SLiM was demonstrated to show comparable low-micromolar IC50 by competition fluorescent anisotropy. To gain further insight into the internal ligand interaction at the molecular level, we obtained the X-ray co-crystal structure of the Ac-EESTSFQGP-CONH2/SHANK1 complex and compared this to the Ac-EAQTRL-COOH/SHANK1 complex. The crystallographic studies reveal that the SHANK1 backbones for the two interactions overlap significantly. The main structural differences were shown to result from the flexible loops which reorganize to accommodate the two PBMs with distinct lengths and terminal groups. In addition, the two C-terminal residues Gly and Pro in Ac-EESTSFQGP-CONH2 were shown not to participate in interaction with the target protein, implying further truncation and structural modification using peptidomimetic approaches on this sequence may be feasible. Taken together, the SLiM Ac-EESTSFQGP-CONH2 holds potential as an internal ligand for targeting SHANK1.

Scalable preparation of green C-terminal amidation peptide-synthesis TAGs and the optimized TAG-assisted liquid-phase synthesis of eptifibatide

Eptifibatide is a cycloheptapeptide with C-terminal amidation and head-to-tail disulfide bridging, which has been approved as an antithrombotic drug. Currently, both at the laboratory scale and industrial level, the synthesis of eptifibatide predominantly relies on solid-phase peptide synthesis (SPPS), which is not regarded as a green sustainable and cost-effective approach to prepare eptifibatide. Herein, we have investigated the strategy employing tag-assisted liquid-phase peptide synthesis (TAG-Assisted LPPS) technology that is scalable to multi-gram scale manufacturing for eptifibatide preparation. We successfully obtained soluble Rink-Amide TAGs by esterifying organophosphorus TAG-OH with Rink-Amide, thereby facilitating the transition from synthesizing C-terminal carboxyl peptides to C-terminal amidation peptides. The products obtained during the tag-assisted coupling and Fmoc deprotection of eptifibatide intermediates can be purified through precipitation processes, eliminating the need for complex chromatographic operations. Accordingly, we developed an optimized laboratory-scale process (300 mmol) for the preparation of TAG-Rink Amide TAG, which was subsequently upscaled successfully to a 50 mmol batch synthesis of eptifibatide. The subsequent work also explores the processes of peptide cleavage and disulfide bond oxidative cyclization in eptifibatide preparation.

A salt bridge of the C-terminal carboxyl group regulates PHPT1 substrate affinity and catalytic activity.

PHPT1 is a histidine phosphatase that modulates signaling in eukaryotes through its catalytic activity. Here, we present an analysis of the structure and dynamics of PHPT1 through a combination of solution NMR, molecular dynamics, and biochemical experiments. We identify a salt bridge formed between the R78 guanidinium moiety and the C-terminal carboxyl group on Y125 that is critical for ligand binding. Disruption of the salt bridge by appending a glycine residue at the C-terminus (G126) leads to a decrease in catalytic activity and binding affinity for the pseudo substrate, para-nitrophenylphosphate (pNPP), as well as the active site inhibitor, phenylphosphonic acid (PPA). We show through NMR chemical shift, 15N relaxation measurements, and analysis of molecular dynamics trajectories, that removal of this salt bridge results in an active site that is altered both structurally and dynamically thereby significantly impacting enzymatic function and confirming the importance of this electrostatic interaction.

Structural Basis for the Interaction of Redβ Single-Strand Annealing Protein with Escherichia coli Single-Stranded DNA-Binding Protein

Redβ is a protein from bacteriophage λ that binds to single-stranded DNA (ssDNA) to promote the annealing of complementary strands. Together with λ-exonuclease (λ-exo), Redβ is part of a two-component DNA recombination system involved in multiple aspects of genome maintenance. The proteins have been exploited in powerful methods for bacterial genome engineering in which Redβ can anneal an electroporated oligonucleotide to a complementary target site at the lagging strand of a replication fork. Successful annealing in vivo requires the interaction of Redβ with E. coli single-stranded DNA-binding protein (SSB), which coats the ssDNA at the lagging strand to coordinate access of numerous replication proteins. Previous mutational analysis revealed that the interaction between Redβ and SSB involves the C-terminal domain (CTD) of Redβ and the C-terminal tail of SSB (SSB-Ct), the site for binding of numerous host proteins. Here, we have determined the x-ray crystal structure of Redβ CTD in complex with a peptide corresponding to the last nine residues of SSB (MDFDDDIPF). Formation of the complex is predominantly mediated by hydrophobic interactions between two phenylalanine side chains of SSB (Phe-171 and Phe-177) and an apolar groove on the CTD, combined with electrostatic interactions between the C-terminal carboxylate of SSB and Lys-214 of the CTD. Mutation of any of these residues to alanine significantly disrupts the interaction of full-length Redβ and SSB proteins. Structural knowledge of this interaction will help to expand the utility of Redβ-mediated recombination to a wider range of bacterial hosts for applications in synthetic biology.

Characterization and Mechanism of a Novel Rice Protein Peptide (AHVGMSGEEPE) Calcium Chelate in Enhancing Calcium Absorption in Caco-2 Cells.

Rice protein peptides (RPP) are a potentially valuable source of high-quality calcium chelating properties. However, there is a lack of information regarding the calcium-absorption-promoting effect of RPP and its underlying mechanism. The present study adopted molecular docking methodologies to analyze the 10 most potent peptide segments from RPP. Results revealed that the peptide AHVGMSGEEPE (AHV) displayed optimal calcium binding properties (calcium-chelating capacity 55.69 ± 0.66 mg/g). Quantum chemistry analysis revealed that the AHV peptide effectively binds and forms stable complexes with calcium via the carbonyl oxygen atoms in valine at position 3 and the carbonyl of the C-terminal carboxyl group of glutamate at position 11. The spectral analysis results indicated that AHV may bind to calcium through carboxyl oxygen atoms, resulting in a transition from a smooth surface block-like structure to a dense granular structure. Furthermore, this study demonstrated that the 4 mmol/L AHV-Ca chelate (61.75 ± 13.23 μg/well) significantly increases calcium absorption compared to 1 mM CaCl2 (28.57 ± 8.59 μg/well) in the Caco-2 cell monolayer. In terms of mechanisms, the novel peptide-calcium chelate AHV-Ca derived from RPP exerts a cell-level effect by upregulating the expression of TRPV6 calcium-ion-channel-related genes and proteins (TRPV6 and Calbindin-D9k). This study provides a theoretical basis for developing functional foods with the AHV peptide as ingredients to improve calcium absorption.

Safety-Catch Linkers for Solid-Phase Peptide Synthesis.

Solid-phase peptide synthesis (SPPS) is the preferred strategy for synthesizing most peptides for research purposes and on a multi-kilogram scale. One key to the success of SPPS is the continual evolution and improvement of the original method proposed by Merrifield. Over the years, this approach has been enhanced with the introduction of new solid supports, protecting groups for amino acids, coupling reagents, and other tools. One of these improvements is the use of the so-called "safety-catch" linkers/resins. The linker is understood as the moiety that links the peptide to the solid support and protects the C-terminal carboxylic group. The "safety-catch" concept relies on linkers that are totally stable under the conditions needed for both α-amino and side-chain deprotection that, at the end of synthesis, can be made labile to one of those conditions by a simple chemical reaction (e.g., an alkylation). This unique characteristic enables the simultaneous use of two primary protecting strategies: tert-butoxycarbonyl (Boc) and fluorenylmethoxycarbonyl (Fmoc). Ultimately, at the end of synthesis, either acids (which are incompatible with Boc) or bases (which are incompatible with Fmoc) can be employed to cleave the peptide from the resin. This review focuses on the most significant "safety-catch" linkers.

A novel approach for the synthesis of the cyclic lipopeptide globomycin.

Cyclic lipopeptides (CLiPs) are a highly diverse class of secondary metabolites produced by bacteria and fungi. Examples of CLiPs have been found that possess potent antimicrobial activity against multidrug-resistant Gram-negative bacteria. Globomycin is a 19-membered CLiP that kills both Gram-positive and Gram-negative bacteria through inhibition of lipoprotein signal peptidase II (Lsp). It can only be obtained in small quantities from its Streptomyces producer strain, so there has been much interest in development of synthetic methods to access globomycin and analogues. Globomycin contains an N-terminal anti-α-methyl-β-hydroxy nonanoyl lipid tail, whose hydroxyl group forms an ester with the C-terminal carboxylate. Constructing the anti-arrangement between the α-methyl and β-hydroxy is synthetically challenging and previous globomycin syntheses are not compatible with diversification of the lipid tail after the stereocenters have been installed. Herein, we describe a new approach for the synthesis of globomycin that allows for facile lipid diversification. Using an anti-Evans Aldol condensation, a common intermediate is obtained that allows different "lipid swapping" through Grubbs-catalyzed cross-metathesis. Upon auxiliary cleavage, the resulting lipid can then be utilized in solid-phase peptide synthesis. Given the plethora of lipopeptides that contain β-hydroxy lipids, this method offers a convenient approach for convergent generation of lipopeptide analogues.

Using AlphaFold2 and Molecular Dynamics Simulation to Model Protein Recognition.

In this chapter, we predict the structure of the Arabidopsis receptor-homology-transmembrane-RING-H2 isoform 1 (RMR1) in complex with the C-terminal sorting determinant of cruciferin (CRU1) by AlphaFold2 using the ColabFold web interface and to perform molecular dynamics simulation to probe the dynamics of the predicted structures. Our results predict that the C-terminal carboxylate group of ctVSD of CRU1 is recognized by the conserved Arg89 of the cargo-binding loop of RMR1 and Arg468 of CRU1 by negative charge residues in the cargo-binding pocket of RMR1. The procedures described here are useful for modeling of other protein complexes.

The importance of the PapR7 C-terminus and amide protons in mediating quorum sensing in Bacilluscereus

The opportunistic human pathogen Bacillus cereus controls the expression of key infection-promoting phenotypes using bacterial quorum sensing (QS). QS signal transduction within the species is controlled by an autoinducing peptide, PapR7, and its cognate receptor, PlcR, indicating that the PlcR:PapR interface is a prime target for QS inhibitor development. The C-terminal region of the peptide (PapR7; ADLPFEF) has been successfully employed as a scaffold to develop potent QS modulators. Despite the noted importance of the C-terminal carboxylate and amide protons in crystallographic data, their role in QS activity has yet to be explored. In this study, an N-methyl scan of PapR7 was conducted in conjunction with a C-terminal modification of previously identified B. cereus QS inhibitors. The results indicate that the amide proton at Glu6 and the C-terminal carboxylate are important for effective QS inhibition of the PlcR regulon. Through β-galactosidase and hemolysis assays, a series of QS inhibitors were discovered, including several capable of inhibiting QS with nanomolar potency. These inhibitors, along with the structure–activity data reported, will serve as valuable tools for disrupting the B. cereus QS pathway towards developing novel anti-infective strategies.

Solution structure of the HOIL-1L NZF domain reveals a conformational switch regulating linear ubiquitin affinity

Attachment of polyubiquitin (poly-Ub) chains to proteins is a major posttranslational modification in eukaryotes. Linear ubiquitin chain assembly complex, consisting of HOIP (HOIL-1-interacting protein), HOIL-1L (heme-oxidized IRP2 Ub ligase 1), and SHARPIN (Shank-associated RH domain-interacting protein), specifically synthesizes "head-to-tail" poly-Ub chains, which are linkedviathe N-terminal methionine α-amino and C-terminal carboxylate of adjacent Ub units and are thus commonly called "linear" poly-Ub chains. Linear ubiquitin chain assembly complex-assembled linear poly-Ub chains play key roles in immune signaling and suppression of cell death and have been associated with immune diseases and cancer; HOIL-1L is one of the proteins known to selectively bind linear poly-Ubviaits Npl4 zinc finger (NZF) domain. Although the structure of the bound form of the HOIL-1L NZF domain with linear di-Ub is known, several aspects of the recognition specificity remain unexplained. Here, we show using NMR and orthogonal biophysical methods, how the NZF domain evolves from a free to the specific linear di-Ub-bound state while rejecting other potential Ub species after weak initial binding. The solution structure of the free NZF domain revealed changes in conformational stability upon linear Ub binding, and interactions between the NZF core and tail revealed conserved electrostatic contacts, which were sensitive to charge modulation at a reported phosphorylation site: threonine-207. Phosphomimetic mutations reduced linear Ub affinity by weakening the integrity of the linear di-Ub-bound conformation. The described molecular determinants of linear di-Ub binding provide insight into the dynamic aspects of the Ub code and the NZF domain's role in full-length HOIL-1L.

Atomic Resolution Insights into pH Shift Induced Deprotonation Events in LS-Shaped Aβ(1-42) Amyloid Fibrils.

Alzheimer's disease is a neurodegenerative disorder associated with the deposition of misfolded aggregates of the amyloid-β protein (Aβ). Aβ(1-42) is one of the most aggregation-prone components in senile plaques of AD patients. We demonstrated that relatively homogeneous Aβ(1-42) fibrils with one predominant fold visible in solid-state NMR spectra can be obtained at acidic pH. The structure of these fibrils differs remarkably from some other polymorphs obtained at neutral pH. In particular, the entire N-terminal region is part of the rigid fibril core. Here, we investigate the effects of a pH shift on the stability and the fold of these fibrils at higher pH values. Fibril bundling at neutral pH values renders cryo-EM studies impractical, but solid-state NMR spectroscopy, molecular dynamics simulations, and biophysical methods provide residue-specific structural information under these conditions. The LS-fold of the Aβ(1-42) fibrils does not change over the complete pH range from pH 2 to pH 7; in particular, the N-terminus remains part of the fibril core. We observe changes in the protonation state of charged residues starting from pH 5 on a residue-specific level. The deprotonation of the C-terminal carboxyl group of A42 in the intermolecular salt bridge with D1 and K28 is slow on the NMR time scale, with a local pKa of 5.4, and local conformations of the involved residues are affected by deprotonation of A42. Thus, we demonstrate that this fibril form is stable at physiological pH values.

Identification of ester-linked ubiquitylation sites during TLR7 signalling increases the number of inter-ubiquitin linkages from 8 to 12.

The E3 ligase HOIL-1 forms ester bonds in vitro between ubiquitin and serine/threonine residues in proteins. Here, we exploit UbiSite technology to identify serine and threonine residues undergoing HOIL-1 catalysed ubiquitylation in macrophages stimulated with R848, an activator of the TLR7/8 heterodimer. We identify Thr12, Thr14, Ser20 and Thr22 of ubiquitin as amino acid residues forming ester bonds with the C-terminal carboxylate of another ubiquitin molecule. This increases from 8 to 12 the number of ubiquitin linkage types that are formed in cells. We also identify Ser175 of IRAK4, Ser136, Thr163 and Ser168 of IRAK2 and Thr141 of MyD88 as further sites of HOIL-1-catalysed ubiquitylation together with lysine residues in these proteins that also undergo R848-dependent ubiquitylation. These findings establish that the ubiquitin chains attached to components of myddosomes are initiated by both ester and isopeptide bonds. Ester bond formation takes place within the proline, serine, threonine-rich (PST) domains of IRAK2 and IRAK4 and the intermediate domain of MyD88. The ubiquitin molecules attached to Lys162, Thr163 and Ser168 of IRAK2 are attached to different IRAK2 molecules.

Characterization, comparative, and functional analysis of arylacetamide deacetylase from Gnathostomata organisms

BackgroundArylacetamide deacetylase (AADAC) is a lipolytic enzyme involved in xenobiotic metabolism. The characterization in terms of activity and substrate preference has been limited to a few mammalian species. The potential role and catalytic activities of AADAC from other organisms are still poorly understood. Therefore, in this work, the physicochemical properties, proteomic analysis, and protein-protein interactions from Gnathostomata organisms were investigated. ResultsThe analysis were performed with 142 orthologue sequences with ~ 48–100% identity with human AADAC. The catalytic motif HGG[A/G] tetrapeptide block was conserved through all AADAC orthologues. Four variations were found in the consensus pentapeptide GXSXG sequence (GDSAG, GESAG, GDSSG, and GSSSG), and a novel motif YXLXP was found. The prediction of N-glycosylation sites projected 4, 1, 6, and 4 different patterns for amphibians, birds, mammals, and reptiles, respectively. The transmembrane regions of AADAC orthologues were not conserved among groups, and variations in the number and orientation of the active site and C-terminal carboxyl were observed among the sequences studied. The protein-protein interaction of AADAC orthologues were related to cancer, lipid, and xenobiotic metabolism genes. ConclusionThe findings from this computational analysis offer new insight into one of the main enzymes involved in xenobiotic metabolism from mammals, reptiles, amphibians, and birds and its potential use in medical and veterinarian biotechnological approaches. Graphical Abstract▪

Multiple and Variable Binding of Pharmacologically Active Bis(maltolato)oxidovanadium(IV) to Lysozyme

The interaction with proteins of metal-based drugs plays a crucial role in their transport, mechanism, and activity. For an active MLn complex, where L is the organic carrier, various binding modes (covalent and non-covalent, single or multiple) may occur and several metal moieties (M, ML, ML2, etc.) may interact with proteins. In this study, we have evaluated the interaction of [VIVO(malt)2] (bis(maltolato)oxidovanadium(IV) or BMOV, where malt = maltolato, i.e., the common name for 3-hydroxy-2-methyl-4H-pyran-4-onato) with the model protein hen egg white lysozyme (HEWL) by electrospray ionization mass spectrometry, electron paramagnetic resonance, and X-ray crystallography. The multiple binding of different V-containing isomers and enantiomers to different sites of HEWL is observed. The data indicate both non-covalent binding of cis-[VO(malt)2(H2O)] and [VO(malt)(H2O)3]+ and covalent binding of [VO(H2O)3–4]2+ and cis-[VO(malt)2] and other V-containing fragments to the side chains of Glu35, Asp48, Asn65, Asp87, and Asp119 and to the C-terminal carboxylate. Our results suggest that the multiple and variable interactions of potential VIVOL2 drugs with proteins can help to better understand their solution chemistry and contribute to define the molecular basis of the mechanism of action of these intriguing molecules.

Selective C-Terminal Conjugation of Protease-Derived Native Peptides for Proteomic Measurements.

Bottom-up proteomic experiments often require selective conjugation or labeling of the N- and/or C-termini of peptides resulting from proteolytic digestion. For example, techniques based on surface fluorescence imaging are emerging as a promising route to high-throughput protein sequencing but require the generation of peptide surface arrays immobilized through single C-terminal point attachment while leaving the N-terminus free. While several robust approaches are available for selective N-terminal conjugation, it has proven to be much more challenging to implement methods for selective labeling or conjugation of the C-termini that can discriminate between the C-terminal carboxyl group and other carboxyl groups on aspartate and glutamate residues. Further, many approaches based on conjugation through amide bond formation require protection of the N-terminus to avoid unwanted cross-linking reactions. To overcome these challenges, herein, we describe a new strategy for single-point selective immobilization of peptides generated by protease digestion via the C-terminus. The method involves immobilization of peptides via lysine amino acids which are found naturally at the C-terminal end of cleaved peptides from digestions of certain serine endoproteinases, like LysC. This lysine and the N-terminus, the sole two primary amines in the peptide fragments, are chemically reacted with a custom phenyl isothiocyanate (EPITC) that contains an alkyne handle. Subsequent exposure of the double-modified peptides to acid selectively cleaves the N-terminal amino acid, while the modified C-terminus lysine remains unchanged. The alkyne-modified peptides with free N-termini can then be immobilized on an azide surface through standard click chemistry. Using this general approach, surface functionalization is demonstrated using a combination of X-ray photoelectron spectroscopy (XPS), ellipsometry, and atomic force microscopy (AFM).