Butyric Acid Methyl Research Articles

Monolithic Perovskite-Silicon Dual-Band Photodetector for Efficient Spectral Light Discrimination.

Selective spectral discrimination of visible and near-infrared light, which accurately distinguishes different light wavelengths, holds considerable promise in various fields, such as automobiles, defense, and environmental monitoring. However, conventional imaging technologies suffer from various issues, including insufficient spatial optimization, low definition, and optical loss. Herein, a groundbreaking advancement is demonstrated in the form of a dual-band photodiode with distinct near-infrared- and visible-light discrimination obtained via simple voltage control. The approach involves the monolithic stacking integration of methylammonium lead iodide (MAPbI3) and Si semiconductors, resulting in a p-Si/n-phenyl-C61-butyric acid methyl ester/i-MAPbI3/p-spiro-MeOTAD (PNIP) device. Remarkably, the PNIP configuration can independently detect the visible and near-infrared regions without traditional optical filters under a voltage range of 3 to -3V. In addition, an imaging system for a prototype autonomous vehicle confirms the capability of the device to separate visible and near-infrared light via an electrical bias and practicality of this mechanism. Therefore, this study pushes the boundaries of image sensor development and sets the stage for fabricating compact and power-efficient photonic devices with superior performance and diverse functionality.

6,6]-Phenyl-C61-Butyric Acid Methyl Ester/Cerium Oxide Bilayer Structure as Efficient and Stable Electron Transport Layer for Inverted Perovskite Solar Cells.

Stability issues and high material cost constitute the biggest obstacles of a perovskite solar cell (PVSC), hampering its sustainable development. Herein, we demonstrate that, after suitable surface modification, the low-cost cerium oxide (CeO x) nanocrystals can be well dispersed in both polar and nonpolar solvents and easily processed into high-quality electron transport layers (ETLs). The inverted PVSC with the configuration of "NiMgLiO/MAPbI3/[6,6]-phenyl-C61-butyric acid methyl ester (PCBM)/CeO x" has achieved a high efficiency up to 18.7%. Especially, the corresponding devices without encapsulation can almost keep their initial PCEs in 30% humidity-controlled air in the dark for 30 days and also show no sign of degradation after continuous light soaking and maximum power point tracking for 200 h in a N2 atmosphere. These results have been proved to be associated with the dual functions achieved by the PCBM/CeO x bilayer ETLs in both efficient electron extraction and good chemical shielding. Furthermore, an all inorganic interfacial layer based PVSC with the configuration of "NiMgLiO/MAPbI3/CeO x" has also achieved a promising efficiency of 16.7%, reflecting the potential to fabricate efficient PVSCs with extremely low cost.

Ternary Organic Solar Cells with Coumarin7 as the Donor Exhibiting Greater Than 10% Power Conversion Efficiency and a High Fill Factor of 75.

Ternary bulk heterojunction (BHJ) is a brilliant photovoltaic technology for improving the performance of organic solar cells (OSCs), because the light absorption range can be significantly extended by using multiple donors or acceptor materials. In this paper, coumarin7 (C7), a small organic molecule typical led used in organic light-emitting diodes, was initially exploited as second electron-donor component in ternary bulk heterojunction OSCs along with conventional blend system spolythieno[3,4-b]-thiophene/benzodithiophene(PTB7) and [6,6]-phenyl-C71 -butyric acid methyl(PC71 BM). A champion PCE value of 10.28% was realized in the ternary OSCs when incorporated with 10 wt % C7 doping ratio in the donors, corresponding to about 35% enhancement compared with the PTB7:PC71BM-based OSCs, a high fill factor (FF) of 75.03%, a short-circuit currentdensity (Jsc) of 18.72 mA cm-2 and an open-circuit voltage (Voc) of 0.73 V. The enhanced performance of the ternary OSCs can be attributed to the simultaneous improvement of the FF and the Jsc. In addition to extended light absorption, a perfect nanofiber filament active layer morphology is obtained due to the good compatibility between C7 and PTB7, which facilitates the balance of charge transportation and the suppression of charge recombination. This investigation suggests that coumarin derivatives, which have completely different structure with polymer donors, can also be used to fabricate ternary solar cells and have the potential applications to obtain amazing performance after further device engineering and optimization.

Vertically Oriented 2D Layered Perovskite Solar Cells with Enhanced Efficiency and Good Stability.

Vertically oriented highly crystalline 2D layered (BA)2 (MA)n-1 Pbn I3n+1 (BA = CH3 (CH2 )3 NH3 , MA = CH3 NH3 , n = 3, 4) perovskite thin-films are fabricated with the aid of ammonium thiocyanate (NH4 SCN) additive through one-step spin-coating process. The humidity-stability of the film is certified by the almost unchanged X-ray diffraction patterns after exposed to humid atmosphere (Hr = 55 ± 5%) for 40 d. The photovoltaic devices with the structure of indium tin oxide(ITO)/poly(3,4-ethylenedioxythiophene):poly(styrene-sulfonate)/(BA)2 (MA)n-1 Pbn I3n+1 (n = 3,4)/[6,6]-phenyl-C61 -butyric acid methyl ester/Bathocuproine/Ag are fabricated. The devices based on (BA)2 (MA)2 Pb3 I10 perovskite (n = 3) with the precursor composition of BAI:methylammonium iodide:PbI2 :NH4 SCN = 2:2:3:1 (by molar ratio) show an averaged power conversion efficiency (PCE) of 6.82%. In the case of (BA)2 (MA)3 Pb4 I13 (n = 4), a higher PCE of 8.79% is achieved. Both of the unsealed devices perform unique stability with almost unchanged PCE during the period of storage in purified N2 glove box. This work provides a simple and effective method to enhance the efficiency of the 2D perovskite solar cell.

Properties of Charge Carrier Transport in Au/Phenyl C61Butyric Acid Methyl Ester/Au Structure

Properties of Charge Carrier Transport in Au/Phenyl C₆₁Butyric Acid Methyl Ester/Au Structure