Bundle Domain Research Articles

The effects of cation adduction upon the conformation of three-helix bundle protein domains

The ubiquitin-binding, three-helix bundle domains of the proteins ubiquilin 1 (UQ1) and hHR23A both exhibited remarkably high, but discrete, ammonium ion adduction when electrosprayed from aqueous ammonium acetate. The degree of adduction was highly charge state dependent with, unusually, the lowest charge states (+3 for UQ1 and +4 for hHR23A) showing almost no adducts and the highest charge states (+5 for UQ1 and +6 for hHR23A) exhibiting adduction with two ammonium cations as the most abundant form. As the charge state of protein ions produced by electrospray ionisation (ESI) is related to solvent-accessible surface area we inferred that the ammonium-carrying ions were of a more open conformation than their protonated counterparts. This was confirmed by ESI-travelling wave ion mobility spectrometry-mass spectrometry (TWIMS-MS), which showed that, although the purely protonated ions were compact, their equivalents bearing one or two ammonium adducts exhibited populations of significantly larger collisional cross section (CCS). We postulate that complexation with the ammonium cation may disrupt a key salt bridge(s) in the compact structure. A similar effect is observed with mono-sodium ion adduction, but this is diminished with each additional sodium ion in the complex to produce more compact structures.

Role of mutual interactions in the chemical and thermal stability of nucleophosmin NPM1 domains

Nucleophosmin (NPM1) is a key factor involved in fundamental biological processes. Mutations involving the NPM1 gene are the most frequent molecular alterations in acute myeloid leukemia. Here we report a biophysical characterization of NPM1 and of its domains in order to gain insights into the role that inter-domain interactions plays in the protein stabilization. Thermal denaturation analyses show that the N-terminal domain is endowed with an exceptional thermal stability, as it does not unfold in the investigated temperature range (20–105°C). This finding is corroborated by chemical denaturation experiments showing that this domain is not significantly affected by the addition of 8M urea. These results are consistent with the chaperone function of NPM1. In line with literature data, the other folded domain of the NPM1, a 3-helix bundle domain located at the C-terminus, shows a lower stability. Interestingly, the chemical and thermal stability of this latter domain, which embeds natural mutations related to acute myeloid leukemia, is influenced by the presence of other regions of the protein. Small but significant stabilizations of the C-terminal 3-helix bundle are provided by the adjacent unfolded fragment as well as by the rest of the protein.

Critical residues in the transmembrane helical bundle domains of the human motilin receptor for erythromycin binding and activity

The motilin receptor belongs to a family of Class I G protein-coupled receptors, and is an important endogenous regulator of gastrointestinal motor function. Motilin and erythromycin, two chemically distinct full agonists of the motilin receptor, are known to bind to distinct regions of this receptor, based on previous systematic mutagenesis of extracellular regions that dissociated the effects on these two agents. The action of these different chemical classes of agonists likely yields a common activation state of the cytosolic face of this receptor that is responsible for interaction with its G protein. In the current work, we studied the predicted transmembrane (TM) domains of this receptor for functional responses to motilin and erythromycin. Motilin receptor constructs were prepared in which each residue in the TM domains was mutated to alanine or valine. Each construct was expressed in COS cells and characterized for motilin and erythromycin binding and intracellular calcium responses stimulated by both agonists. Constructs with mutations of residues, Asp94, Leu95, Arg97 and Trp99 in TM2, Ser169 in TM4, and Tyr321 and Glu325 in TM6, were responsible for the negative impact on biological activity stimulated by erythromycin, but had no effect on motilin responses. On the other hand, constructs with mutations of residues, Leu113 in TM3, Pro172 in TM4, Trp250 and Tyr255 in TM5, and Gln334 in TM7, were negatively responsive to both erythromycin and motilin. These data support important roles of new regions in the TM domains of the motilin receptor for erythromycin action, suggesting differential mechanisms of actions by peptidyl and non-peptidyl ligands.

Effects of the Iowa and Milano Mutations on Apolipoprotein A-I Structure and Dynamics Determined by Hydrogen Exchange and Mass Spectrometry

The Iowa point mutation in apolipoprotein A-I (G26R) leads to a systemic amyloidosis condition, and the Milano mutation (R173C) is associated with hypoalphalipoproteinemia, a reduced plasma level of high-density lipoprotein. To probe the structural effects that lead to these outcomes, we used amide hydrogen-deuterium exchange coupled with a fragment separation/mass spectrometry analysis (HX MS). The Iowa mutation inserts an arginine residue into the nonpolar face of an α-helix that spans residues 7-44 and causes changes in structure and structural dynamics. This helix unfolds, and other helices in the N-terminal helix bundle domain are destabilized. The segment encompassing residues 116-158, largely unstructured in wild-type apolipoprotein A-I, becomes helical. The helix spanning residues 81-115 is destabilized by 2 kcal/mol, increasing the small fraction of time it is transiently unfolded to ≥1%, which allows proteolysis at residue 83 in vivo over time, releasing an amyloid-forming peptide. The Milano mutation situated on the polar face of the helix spanning residues 147-178 destabilizes the helix bundle domain only moderately, but enough to allow cysteine-mediated dimerization that leads to the altered functionality of this variant. These results show how the HX MS approach can provide a powerful means of monitoring, in a nonperturbing way and at close to amino acid resolution, the structural, dynamic, and energetic consequences of biologically interesting point mutations.

Unfolding of the C-Terminal Domain of the J-Protein Zuo1 Releases Autoinhibition and Activates Pdr1-Dependent Transcription

The C-terminal 69 residues of the J-protein Zuo1 are sufficient to activate Pdr1, a transcription factor involved in both pleiotropic drug resistance and growth control. Little is understood about the pathway of activation by this primarily ribosome associated Hsp40 co-chaperone. Here, we report that only the C-terminal 13 residues of Zuo1 are required for activation of Pdr1, with hydrophobic residues being critical for activity. Two-hybrid interaction experiments suggest that the interaction between this 13-residue Zuo1 peptide and Pdr1 is direct, analogous to the activation of Pdr1 by xenobiotics. However, simply dissociation of Zuo1 from the ribosome is not sufficient for induction of Pdr1 transcriptional activity, as the C-terminal 86 residues of Zuo1 fold into an autoinhibitory left-handed four-helix bundle. Hydrophobic residues critical for interaction with Pdr1 are sequestered within the structure of this C-terminal domain (CTD), necessitating unfolding for activation. Thus, although expression of the CTD does not result in activation, alterations that destabilize the structure cause induction of pleiotropic drug resistance. These destabilizing alterations also result in dissociation of the full-length protein from the ribosome. Thus, our results are consistent with an activation pathway in which unfolding of Zuo1's C-terminal helical bundle domain results in ribosome dissociation followed by activation of Pdr1 via a direct interaction.

Fluorescence Analysis of the Lipid Binding-Induced Conformational Change of Apolipoprotein E4

Apolipoprotein (apo) E is thought to undergo conformational changes in the N-terminal helix bundle domain upon lipid binding, modulating its receptor binding activity. In this study, site-specific fluorescence labeling of the N-terminal (S94) and C-terminal (W264 or S290) helices in apoE4 by pyrene maleimide or acrylodan was employed to probe the conformational organization and lipid binding behavior of the N- and C-terminal domains. Guanidine denaturation experiments monitored by acrylodan fluorescence demonstrated the less organized, more solvent-exposed structure of the C-terminal helices compared to the N-terminal helix bundle. Pyrene excimer fluorescence together with gel filtration chromatography indicated that there are extensive intermolecular helix-helix contacts through the C-terminal helices of apoE4. Comparison of increases in pyrene fluorescence upon binding of pyrene-labeled apoE4 to egg phosphatidylcholine small unilamellar vesicles suggests a two-step lipid-binding process; apoE4 initially binds to a lipid surface through the C-terminal helices followed by the slower conformational reorganization of the N-terminal helix bundle domain. Consistent with this, fluorescence resonance energy transfer measurements from Trp residues to acrylodan attached at position 94 demonstrated that upon binding to the lipid surface, opening of the N-terminal helix bundle occurs at the same rate as the increase in pyrene fluorescence of the N-terminal domain. Such a two-step mechanism of lipid binding of apoE4 is likely to apply to mostly phospholipid-covered lipoproteins such as VLDL. However, monitoring pyrene fluorescence upon binding to HDL(3) suggests that not only apoE-lipid interactions but also protein-protein interactions are important for apoE4 binding to HDL(3).

Separating the effects of internal friction and transition state energy to explain the slow, frustrated folding of spectrin domains

The elongated three-helix bundle domains spectrin R16 and R17 fold some two to three orders of magnitude more slowly than their homologue R15. We have shown that this slow folding is due, at least in part, to roughness in the free-energy landscape of R16 and R17. We have proposed that this roughness is due to a frustrated search for the correct docking of partly preformed helices. However, this accounts for only a small part of the slowing of folding and unfolding. Five residues on the A helix of R15, when inserted together into R16 or R17, increase the folding rate constants, reduce landscape roughness, and alter the folding mechanism to one resembling R15. The effect of each of these mutations individually is investigated here. No one mutation causes the behavior seen for the five in combination. However, two mutations, E18F and K25V, significantly increase the folding and unfolding rates of both R16 and R17 but without a concomitant loss in landscape roughness. E18F has the greatest effect on the kinetics, and a Φ-value analysis of the C helix reveals that the folding mechanism is unchanged. For both E18F and K25V the removal of the charge and resultant transition state stabilization is the main origin of the faster folding. Consequently, the major cause of the unusually slow folding of R16 and R17 is the non-native burial of the two charged residues in the transition state. The slowing due to landscape roughness is only about fivefold.

αE-catenin is an autoinhibited molecule that coactivates vinculin

αE-catenin, an essential component of the adherens junction, interacts with the classical cadherin-β-catenin complex and with F-actin, but its precise role is unknown. αE-catenin also binds to the F-actin-binding protein vinculin, which also appears to be important in junction assembly. Vinculin and αE-catenin are homologs that contain a series of helical bundle domains, D1-D5. We mapped the vinculin-binding site to a sequence in D3a comprising the central two helices of a four-helix bundle. The crystal structure of this peptide motif bound to vinculin D1 shows that the two helices adopt a parallel, colinear arrangement suggesting that the αE-catenin D3a bundle must unfold in order to bind vinculin. We show that αE-catenin D3 binds strongly to vinculin, whereas larger fragments and full-length αE-catenin bind approximately 1,000-fold more weakly. Thus, intramolecular interactions within αE-catenin inhibit binding to vinculin. The actin-binding activity of vinculin is inhibited by an intramolecular interaction between the head (D1-D4) and the actin-binding D5 tail. In the absence of F-actin, there is no detectable binding of αE-catenin D3 to full-length vinculin; however, αE-catenin D3 promotes binding of vinculin to F-actin whereas full-length αE-catenin does not. These findings support the combinatorial or "coincidence" model of activation in which binding of high-affinity proteins to the vinculin head and tail is required to shift the conformational equilibrium of vinculin from a closed, autoinhibited state to an open, stable F-actin-binding state. The data also imply that αE-catenin must be activated in order to bind to vinculin.

Ligand binding and activation of the secretin receptor, a prototypic family B G protein‐coupled receptor

The secretin receptor is a prototypic member of family B G protein-coupled receptors that binds and responds to a linear 27-residue peptide natural ligand. The carboxyl-terminal region of this peptide assumes a helical conformation that occupies the peptide-binding cleft within the structurally complex disulphide-bonded amino-terminal domain of this receptor. The amino terminus of secretin is directed toward the core helical bundle domain of this receptor that seems to be structurally distinct from the analogous region of family A G protein-coupled receptors. This amino-terminal region of secretin is critical for its biological activity, to stimulate Gs coupling and the agonist-induced cAMP response. While the natural peptide ligand is known to span the two key receptor domains, with multiple residue-residue approximation constraints well established, the orientation of the receptor amino terminus relative to the receptor core helical bundle domain is still unclear. Fluorescence studies have established that the mid-region and carboxyl-terminal end of secretin are protected by the receptor peptide-binding cleft and the amino terminus of secretin is most exposed to the aqueous milieu as it is directed toward the receptor core, with the mid-region of the peptide becoming more exposed upon receptor activation. Like other family B peptide hormone receptors, the secretin receptor is constitutively present in a structurally specific homo-dimeric complex built around the lipid-exposed face of transmembrane segment four. This complex is important for facilitating G protein association and achieving the high affinity state of this receptor.

Crystal structure of vinculin in complex with vinculin binding site 50 (VBS50), the integrin binding site 2 (IBS2) of talin

The cytoskeletal protein talin activates integrin receptors by binding of its FERM domain to the cytoplasmic tail of β-integrin. Talin also couples integrins to the actin cytoskeleton, largely by binding to and activating the cytoskeletal protein vinculin, which binds to F-actin through the agency of its five-helix bundle tail (Vt) domain. Talin activates vinculin by means of buried amphipathic α-helices coined vinculin binding sites (VBSs) that reside within numerous four- and five-helix bundle domains that comprise the central talin rod, which are released from their buried locales by means of mechanical tension on the integrin:talin complex. In turn, these VBSs bind to the N-terminal seven-helix bundle (Vh1) domain of vinculin, creating an entirely new helix bundle that severs its head-tail interactions. Interestingly, talin harbors a second integrin binding site coined IBS2 that consists of two five-helix bundle domains that also contain a VBS (VBS50). Here we report the crystal structure of VBS50 in complex with vinculin at 2.3 Å resolution and show that intramolecular interactions of VBS50 within IBS2 are much more extensive versus its interactions with vinculin. Indeed, the IBS2-vinculin interaction only occurs at physiological temperature and the affinity of VBS50 for vinculin is about 30 times less than other VBSs. The data support a model where integrin binding destabilizes IBS2 to allow it to bind to vinculin.

Toward Unraveling the Structure and Molecular Basis of Ferrous Iron Transport of Feo from Klebsiella Pneumoniae

Feo from K. pneumoniae is a unique type of ferrous iron transporter for bacteria. It consists of three proteins, FeoA, a small SH3-domain like protein; FeoB, a large protein consisting of a cytosolic N-terminal G-protein domain and a C-terminal transmembrane domain that may serve as a Fe++ permease; and FeoC, a small putative transcriptional factor. Using X-ray crystallography and NMR we have solved the structure of FeoA, the intracellular domain of FeoB (NFeoB), FeoC and NFeoB/FeoC complex. In the structures, a canonical G-protein domain (G domain) is followed by a helical bundle domain (S-domain), which despite its lack of sequence similarity between species is structurally conserved.

Organization and Lipid Interaction of the Model Amphipathic α-Helix Bundle Protein apoLp-III

Amphipathic α-helix bundle domains are found in many proteins responsible for neutral lipid transport and storage. Important examples are found in apoE, the perilipins, and the representative exchangeable apolipoprotein apoLp-III. Here we characterized the organization and lipid interaction of apoLp-III in Langmuir monolayers modeling the phospholipid monolayer surrounding the neutral lipid particle, i.e. lipoprotein. Surface-sensitive X-ray techniques showed that apoLp-III is partially unfolded at the interface as the unfolded protein was best represented by two distinct regions. This surprising result does not result from the high degree of glycosylation of apoLp-III as the recombinant protein behaved in a similar fashion. This suggests that either apoLp-III is partially unfolded or that unfolded protein is associated with the protein monolayer. Injection of apoLp-III underneath a previously formed (phospho)-lipid monolayer results in a rapid increase of the surface pressure. We characterized this increase in pressure as a function of effective lipid molecular shape and lipid packing density. These results should shed important light on the interaction of amphipathic α-helix bundle domains with phospholipid monolayers. This work will be extended in the future to include additional apolipo-and lipid droplet proteins containing amphipathic α-helix bundle domains.

Thermofluor-based optimization strategy for the stabilization and crystallization of Campylobacter jejuni desulforubrerythrin

Desulforubrerythrin from Campylobacter jejuni has recently been biochemical and spectroscopically characterized. It is a member of the rubrerythrin family, and it is composed of three structural domains: the N-terminal desulforedoxin domain with a non-heme iron center, followed by a four-helix bundle domain harboring a binuclear iron center and finally a C-terminal rubredoxin domain. To date, this is the first example of a protein presenting this kind of structural domain organization, and therefore the determination of its crystal structure may unveil unexpected structural features. Several attempts were made in order to obtain protein crystals, but always without success. As part of our strategy the thermofluor method was used to increase protein stability and its propensity to crystallize. This approach has been recently used to optimize protein buffer formulation, thus yielding more stable and homogenous protein samples. Thermofluor has also been used to identify cofactors/ligands or small molecules that may help stabilize native protein states. A successful thermofluor approach was used to select a pH buffer condition that allowed the crystallization of Campylobacter jejuni desulforubrerythrin, by screening both buffer pH and salt concentration. A buffer formulation was obtained which increased the protein melting temperature by 7 °C relatively to the initial purification buffer. Desulforubrerythrin was seen to be stabilized by lower pH and high salt concentration, and was dialyzed into the new selected buffer, 100 mM MES pH 6.2, 500 mM NaCl. This stability study was complemented with a second thermofluor assay in which different additives were screened. A crystallization screening was carried out and protein crystals were rapidly obtained in one condition. Protein crystal optimization was done using the same additive screening. Interestingly, a correlation between the stability studies and crystallization experiments using the additive screening could be established. The work presented here shows an elegant example where thermofluor was shown to be a key biophysical method that allowed the identification of an improved buffer formulation and the applicability of this technique to increase the propensity of a protein to crystallize is discussed.

Engineering Bispecificity into a Single Albumin-Binding Domain

Bispecific antibodies as well as non-immunoglobulin based bispecific affinity proteins are considered to have a very high potential in future biotherapeutic applications. In this study, we report on a novel approach for generation of extremely small bispecific proteins comprised of only a single structural domain. Binding to tumor necrosis factor-α (TNF-α) was engineered into an albumin-binding domain while still retaining the original affinity for albumin, resulting in a bispecific protein composed of merely 46 amino acids. By diversification of the non albumin-binding side of the three-helix bundle domain, followed by display of the resulting library on phage particles, bispecific single-domain proteins were isolated using selections with TNF-α as target. Moreover, based on the obtained sequences from the phage selection, a second-generation library was designed in order to further increase the affinity of the bispecific candidates. Staphylococcal surface display was employed for the affinity maturation, enabling efficient isolation of improved binders as well as multiparameter-based sortings with both TNF-α and albumin as targets in the same selection cycle. Isolated variants were sequenced and the binding to albumin and TNF-α was analyzed. This analysis revealed an affinity for TNF-α below 5 nM for the strongest binders. From the multiparameter sorting that simultaneously targeted TNF-α and albumin, several bispecific candidates were isolated with high affinity to both antigens, suggesting that cell display in combination with fluorescence activated cell sorting is a suitable technology for engineering of bispecificity. To our knowledge, the new binders represent the smallest engineered bispecific proteins reported so far. Possibilities and challenges as well as potential future applications of this novel strategy are discussed.

Allosteric Communication in Cysteinyl tRNA Synthetase: A NETWORK OF DIRECT AND INDIRECT READOUT

Protein structure networks are constructed for the identification of long-range signaling pathways in cysteinyl tRNA synthetase (CysRS). Molecular dynamics simulation trajectory of CysRS-ligand complexes were used to determine conformational ensembles in order to gain insight into the allosteric signaling paths. Communication paths between the anticodon binding region and the aminoacylation region have been identified. Extensive interaction between the helix bundle domain and the anticodon binding domain, resulting in structural rigidity in the presence of tRNA, has been detected. Based on the predicted model, six residues along the communication paths have been examined by mutations (single and double) and shown to mediate a coordinated coupling between anticodon recognition and activation of amino acid at the active site. This study on CysRS clearly shows that specific key residues, which are involved in communication between distal sites in allosteric proteins but may be elusive in direct structure analysis, can be identified from dynamics of protein structure networks.

Thermostability of Two Cyanobacterial GrpE Thermosensors

GrpE proteins act as co-chaperones for DnaK heat-shock proteins. The dimeric protein unfolds under heat stress conditions, which results in impaired interaction with a DnaK protein. Since interaction of GrpE with DnaK is crucial for the DnaK chaperone activity, GrpE proteins act as a thermosensor in bacteria. Here we have analyzed the thermostability and function of two GrpE homologs of the mesophilic cyanobacterium Synechocystis sp. PCC 6803 and of the thermophilic cyanobacterium Thermosynechococcus elongatus BP1. While in Synechocystis an N-terminal helix pair of the GrpE dimer appears to be the thermosensing domain and mainly mediates GrpE dimerization, the C-terminal four-helix bundle is involved in additional stabilization of the dimeric structure. The four-helix bundle domain has a key role in the thermophilic cyanobacterium, since dimerization of the Thermosynechococcus protein appears to be mediated by the four-helix bundle domain, and melting of this domain is linked to monomerization of the GrpE protein. Thus, in two related cyanobacteria the GrpE thermosensing function might be mediated by different protein domains.

Experimental evidence for the role of domain swapping in the evolution of the histone fold

The histone fold forms the fundamental endoskeleton of the protein core of the nucleosome and is also found in several transcription factors. We have investigated the evolutionary origins of this ubiquitous protein motif, which is found soluble exclusively as an antiparallel (handshake motif) dimer. We introduced a three amino acid insertion into the middle of a homodimeric archaeal histone fold motif. The engineered molecule was found to be a soluble and stable monomer with properties consistent with a four-helix-bundle protein. The experimental evidence presented here support the hypothesis that the handshake association motif characteristic of present-day histone dimers is the evolutionary product of domain swapping between two four-helix bundle domains, each of which derived from the tandem duplication of a primitive helix-strand-helix unit.

Structural and Sequence Analysis of Imelysin-Like Proteins Implicated in Bacterial Iron Uptake

Imelysin-like proteins define a superfamily of bacterial proteins that are likely involved in iron uptake. Members of this superfamily were previously thought to be peptidases and were included in the MEROPS family M75. We determined the first crystal structures of two remotely related, imelysin-like proteins. The Psychrobacter arcticus structure was determined at 2.15 Å resolution and contains the canonical imelysin fold, while higher resolution structures from the gut bacteria Bacteroides ovatus, in two crystal forms (at 1.25 Å and 1.44 Å resolution), have a circularly permuted topology. Both structures are highly similar to each other despite low sequence similarity and circular permutation. The all-helical structure can be divided into two similar four-helix bundle domains. The overall structure and the GxHxxE motif region differ from known HxxE metallopeptidases, suggesting that imelysin-like proteins are not peptidases. A putative functional site is located at the domain interface. We have now organized the known homologous proteins into a superfamily, which can be separated into four families. These families share a similar functional site, but each has family-specific structural and sequence features. These results indicate that imelysin-like proteins have evolved from a common ancestor, and likely have a conserved function.

Molecular Basis of Secretin Docking to Its Intact Receptor Using Multiple Photolabile Probes Distributed throughout the Pharmacophore

The molecular basis of ligand binding and activation of family B G protein-coupled receptors is not yet clear due to the lack of insight into the structure of intact receptors. Although NMR and crystal structures of amino-terminal domains of several family members support consistency in general structural motifs that include a peptide-binding cleft, there are variations in the details of docking of the carboxyl terminus of peptide ligands within this cleft, and there is no information about siting of the amino terminus of these peptides. There are also no empirical data to orient the receptor amino terminus relative to the core helical bundle domain. Here, we prepared a series of five new probes, incorporating photolabile moieties into positions 2, 15, 20, 24, and 25 of full agonist secretin analogues. Each bound specifically to the receptor and covalently labeled single distinct receptor residues. Peptide mapping of labeled wild-type and mutant receptors identified that the position 15, 20, and 25 probes labeled residues within the distal amino terminus of the receptor, whereas the position 24 probe labeled the amino terminus adjacent to TM1. Of note, the position 2 probe labeled a residue within the first extracellular loop of the receptor, a region not previously labeled, providing an important new constraint for docking the amino-terminal region of secretin to its receptor core. These additional experimentally derived constraints help to refine our understanding of the structure of the secretin-intact receptor complex and provide new insights into understanding the molecular mechanism for activation of family B G protein-coupled receptors.

Characterization and crystal structure of the type IIG restriction endonuclease RM.BpuSI

A type IIG restriction endonuclease, RM.BpuSI from Bacillus pumilus, has been characterized and its X-ray crystal structure determined at 2.35Å resolution. The enzyme is comprised of an array of 5-folded domains that couple the enzyme's N-terminal endonuclease domain to its C-terminal target recognition and methylation activities. The REase domain contains a PD-x15-ExK motif, is closely superimposable against the FokI endonuclease domain, and coordinates a single metal ion. A helical bundle domain connects the endonuclease and methyltransferase (MTase) domains. The MTase domain is similar to the N6-adenine MTase M.TaqI, while the target recognition domain (TRD or specificity domain) resembles a truncated S subunit of Type I R–M system. A final structural domain, that may form additional DNA contacts, interrupts the TRD. DNA binding and cleavage must involve large movements of the endonuclease and TRD domains, that are probably tightly coordinated and coupled to target site methylation status.