Buffer Solution Research Articles

Synthesis of metal–organic framework ZIF-9-Mel and its application as an electrochemical modifier in Pb2+ detection

In this study, a selective electrochemical sensor was introduced for determination of lead ions based on a metal–organic framework (MOF)-melamine together with carbon black (CB) on the glassy carbon electrode (GCE). Herein, the zeolitic imidazolate framework-9-Mel (ZIF-9-Mel), which is a type of MOF, was synthesized and used as an electrode modifier. The interaction between Pb2+ and amine groups is conditioned by dative attachment, which causes the complexation of Pb2+-N through soft–soft interactions. To enhance the performance of the modified electrode, several parameters such as the pH of the buffer solution, the deposition potential, and the deposition time that affect response were optimized. Under optimized conditions (pH = 3, deposition time = 270 s, deposition potential = −0.7 V) the ZIF-9-Mel/CB/GCE sensor shows two linear ranges (0.5 nM–50 nM and 50 nM–1000 nM), low detection limit (0.16 nM), long-term stability, good repeatability and desirable reproducibility by differential pulse voltammetry (DPV) technique. To display the sensor ability for actual application, ZIF-9-Mel/CB/GCE was used for Pb2+ detection in lettuce and tomato samples with excellent results. According to the introduced method, MOFs are satisfactory materials for fabricating effective electrochemical sensors to detect Pb2+ ions simply and cost-effectively.

High sugar diet alters immune function and the gut microbiome in juvenile green iguanas (Iguana iguana).

The present work aimed to study whether a high sugar diet can alter immune responses and the gut microbiome in green iguanas. Thirty-six iguanas were split into four treatment groups using a 2x2 design. Iguanas either received a sugar supplemented diet or a control diet, and either received a lipopolysaccharide (LPS) injection or a phosphate buffer solution (PBS) injection. Iguanas were given their respective diet treatment through the entire study (∼3 months) and received a primary immune challenge one month and two months into the experiment. Blood samples and cloacal swabs were taken at various points in the experiment and used to measure changes in the immune system (bacterial killing ability, lysis and agglutination scores, LPS specific IgY concentrations), and alterations in the gut microbiome. We found that sugar diet reduces bacterial killing ability following an LPS challenge, and sugar and the immune challenge temporarily alters gut microbiome composition while reducing alpha diversity. While sugar did not directly reduce lysis and agglutination following the immune challenge, the change in these scores over a 24-hour period following an immune challenge was more drastic (it decreased) relative to the control diet group. Moreover, sugar increased constitutive agglutination outside of the immune challenges (i.e., pre-challenge levels). In this study, we provide evidence that a high sugar diet affects the immune system of green iguanas (in a disruptive manner) and alters the gut microbiome.

Sensitive Voltammetric Detection of Acetaminophen on CuONPs-MWCNTs Modified Glassy Carbon Electrode with Enhancement Effect of Anionic Surfactant

In the present work, a voltammetric method using differential pulse voltammetric technique for the assessment of antipyretic and analgesic drug, acetaminophen was developed. The CuO nanoparticles were prepared and characterized. A glassy carbon electrode (GCE) fabricated with the suspension of CuO nanoparticles (CuONPs) and multi-walled carbon nanotubes (MWCNTs) were used. The modified electrode showed improved anodic peak current by introducing an anionic surfactant sodium dodecyl sulphate in phosphate buffer solution. The consequence of pH of supporting electrolyte, amount of nanoparticles suspension and surfactant concentration was investigated at a physiological pH of 7.4. Using differential pulse voltammetry, the fabricated electrode showed linear dynamic range from 9 to 160 nM of acetaminophen concentration. From the calibration plot, the computed detection limit was 5.06 nM and quantification limit was 16.88 nM. The developed method was checked for its reproducibility and assay during a day and intraday as well. The developed process was fruitfully applied to detect acetaminophen in pediatric oral suspensions administered to infants.

Detoxification of Chemical Warfare Agents by a Zr‐Based MOF with High Recycling Ability at Physiological pH

The neutralization of organophosphorous (OP) chemical agents used in modern warfare is a growing concern due to their extreme toxicity to human cells. In several previous works, although the capability of several Zr‐MOF‐based catalysts has been showcased to facilitate hydrolysis of OP agents in heterogeneous pathways, their usage appeared to be limited by very slow kinetics at neutral pH. There is still a lack of MOF based catalysts that can detoxify OPs at physiological pH. The recycling ability of MOF‐based catalysts has also not been greatly explored. Thus, herein, we explored a Zr‐based MOF, MOF‐801(Zr) for the detoxification of a series of OP nerve agents and a pesticide with simultaneous adsorption and degradation at pH 7.5 in a buffer solution, close to physiological conditions. This MOF‐based catalyst demonstrates significant hydrolysis activity towards several nerve agents, with up to 99% conversion within 2 h and an excellent half‐life of less than 5 minutes. In addition, it can be recycled at least 5 times consecutively with a residual activity of at least 90%.

Brominated oxime nucleophiles are efficiently reactivating cholinesterases inhibited by nerve agents.

Six novel brominated bis-pyridinium oximes were designed and synthesized to increase their nucleophilicity and reactivation ability of phosphorylated acetylcholinesterase (AChE) and butyrylcholinesterase (BChE). Their pKa was valuably found lower to parent non-halogenated oximes. Stability tests showed that novel brominated oximes were stable in water, but the stability of di-brominated oximes was decreased in buffer solution and their degradation products were prepared and characterized. The reactivation screening of brominated oximes was tested on AChE and BChE inhibited by organophosphorus surrogates. Two mono-brominated oximes reactivated AChE comparably to non-halogenated analogues, which was further confirmed by reactivation kinetics. The acute toxicity of two selected brominated oximes was similar to commercially available oxime reactivators and the most promising brominated oxime was tested in vivo on sarin- and VX-poisoned rats. This brominated oxime showed interesting CNS distribution and significant reactivation effectiveness in blood. The same oxime resulted with the best protective index for VX-poisoned rats.

Hierarchical multiphase heterointerfaces Ni2P–CoP/MoO2 catalyst for efficient and stable hydrogen evolution reaction over the entire pH range

The development of pH-versatile, high-performing, and durable catalysts for hydrogen evolution reaction (HER) is crucial to satisfy the complex environment of water electrolysis industry. Herein, we present the synthesis of a hierarchical multiphase heterointerfaces Ni2P–CoP/MoO2 nanocatalyst with exceptionally high HER activity in the entire pH range through a facile three-step process involved hydrothermal, electrodeposition, and in situ phosphating treatment. Experiments and characterization revealed the strong electronic interactions among the phases of Ni2P, CoP, and MoO2, which endowed the Ni2P–CoP/MoO2 with high hydrogen evolution activity in different pH ranges. Meanwhile, the layered structure of our as-prepared catalyst makes the massive exposure of active sites. As a result, the Ni2P–CoP/MoO2 catalyst shows remarkable performance, requiring mere overpotentials of 33, 41, and 23 mV to drive 10 mA cm−2 in 1 M KOH, 1 M phosphate buffer solution, 0.5 M H2SO4, respectively. Moreover, the catalyst exhibits excellent stability in the chronopotentialmetry test under different pH electrolyte. Impressively, the Ni2P–CoP/MoO2 catalyst coupled with Ni–Fe LDH to form an overall water splitting system only require 1.50 V to drive 10 mA cm−2. Furthermore, this system actuated by wind and solar energy can stably undergo a continuous production of hydrogen and oxygen.

A Simple, Ecofriendly, and Fast Method for Nitrate Quantification in Bottled Water Using Visible Spectrophotometry

There are many works associating the presence of nitrate in water and the occurrence of cancer in humans. The most common method for quantifying nitrate in water is based on the use of toxic cadmium as a reductant. In this work, a new approach was developed for the quantification of nitrate in bottled water with indirect spectrophotometry using Zn0 as a reductant. Nitrate is reduced to nitrite using Zn0 in a buffered medium (acetate/acetic acid) and quantified with visible spectrophotometry using the Griess reaction between sulfanilamide and N-(1-naphthyl)-ethylenediamine. The influence of pH, buffer solution (constitution and concentration), Zn0 (mass and granulometry), and agitation time on the efficiency of nitrite generation was evaluated. The optimal conditions were an acetate–acetic acid buffer solution with a concentration and pH of 0.75 mol L−1 and 6.00, respectively, and a Zn0 particle size of 20 MESH and Zn0 mass of 300 mg. The limits of detection and quantification (LoD and LoQ) were 0.024 and 0.08 mg L−1, respectively. The method’s accuracy and precision were evaluated using the analysis of commercial bottled water. In conclusion, the use of Zn0 instead of cadmium provided a green method with excellent LoD/LoQ. Further, the method proved to be simple and easy to apply during outdoor analysis.

A non-spherical nanoparticles system for the delivery of peptides using polymer grafted nanocellulose

AbstractPeptide drugs are increasingly used to treat a variety of diseases ranging from cancer, and infections to cardiovascular diseases. However, peptides can suffer from low stability in the bloodstream. Entrapment of peptides into nano-sized carriers of various types has widely been explored, but all of them have spherical shapes. Nanocellulose can in contrast serve as a non-spherical nanoparticle with a high aspect ratio. After the isolation of nanocellulose by TEMPO-mediated oxidation, the material needs to be modified with polymers to generate nanoparticles with high water-solubility that can also favourably interact with peptide drugs. We have here chosen insulin as the model drug, which can strongly interact with cationic polymers. As it is known that cationic polymer may retain charged drugs too tightly, we have selected poly(2-(dimethylamino)ethyl acrylate) PDMAEA as a degradable polymer that undergoes self-hydrolysis to poly(acrylic acid) in water. This polymer was compared to poly(N-(3-(dimethylamino)propyl) acrylamide) PDMAPAA, which is a stable cationic polymer. The cationic polymer was co-grafted with poly(2-hydroxyethyl acrylate) PHEA as a water-soluble neutral polymer using the three-component Passerini reaction. A combination of fluorescence and UV-Vis techniques were used to quantify the amount of polymer that was conjugated to the surface. The polymer-coated nanocellulose was labelled with the fluorescent cyanine dye Cy5 while insulin was labelled with Cy3 creating a FRET system that allows monitoring of the interaction between insulin and polymer in cell growth media. We observed that despite the self-hydrolysis of PDMAEA into a negatively charged polymer, the negatively charged insulin was not released in buffer solution according to the FRET studies. Only the addition of serum-supplemented cell growth media led to insulin release. The limited release was explained with the fact that insulin, as well as other peptides, have a mixture of negative and positive charges, with the pH value and the isoelectric point determining the balance between both. Negative-charged polymers can therefore still interact favourably with negatively charged peptides by interacting with cationic amino acids. Graphical Abstract

A novel copper ion enhanced electrochemical DNA biosensor for the determination of epinephrine

A novel electrochemical biosensor was developed for the detection of epinephrine (EP) by immobilizing double-strand DNA (dsDNA) bound with copper ions on a gold electrode (Cu2+/dsDNA/MCH/AuE). The electrochemical behavior of EP at Cu2+/dsDNA/MCH/AuE was examined, and the results demonstrated a significant enhancement in the electrocatalytic oxidation peak current of EP due to the formation of a stable G-Cu(II)-G sandwich structure between Cu2+ and guanine at the modified electrode. The modification process of the electrode was characterized by scanning electron microscopy, infrared spectroscopy, electrochemical impedance spectroscopy, and differential pulse voltammetry. A study on the effect of pH in phosphate buffer solution on the electrochemical oxidation of EP indicated that the catalytic oxidation process was pH-dependent. A plot of catalytic current versus EP concentration exhibited a dual-linear relationship within two ranges: 1.0–12.5 μM and 12.5–1000.0 μM, with correlation coefficients of 0.995 and 0.997, respectively. The limit of detection was determined to be 47 nM (S/N = 3). According to the calculated Hill coefficient (0.99), it can be concluded that the electrocatalytic process followed the Michaelis-Menten kinetic mechanism. The maximum catalytic current Im was 25 μA, while the apparent Michaelis-Menten constant Km was 1.425 mM. These findings indicated excellent electrocatalytic activity of the modified electrode towards oxidation of EP. The developed biosensor successfully detected EP in spiked mouse serum as well as epinephrine hydrochloride injection with high selectivity, sensitivity, stability, and accuracy.

Lyophilizable Stem Cell-Hybrid Liposome with Long-Term Stability and High Targeting Capacity.

The hybridization of liposome with stem cell membrane is an emerging technology to prepare the nanovehicle with the capacity of disease-responsive targeting. However, the long-term storage of this hybrid liposome has received limited attention in the literature, which is essential for their potential applicability in the clinic. Therefore, the preservation of long-term activity of stem cell-hybrid liposome using freeze-drying is investigated in the present study. Mesenchymal stem cell-hybrid liposome is synthesized and its feasibility for freeze-drying under different conditions is examined. Results revealed that pre-freezing the hybrid liposome at -20°C in Tris buffer solution (pH 7.4) containing 10% trehalose could well preserve the liposomal structure for at least 3 months. Notably, major membrane proteins on the hybrid liposome are protected in this formulation and CXCR4-associated targeting capacity is maintained both in vitro and in vivo. Consequently, the hybrid liposome stored for 3 months demonstrate a comparable tumor inhibition as the fresh-prepared ones. The present study provides the first insights into the long-term storage of stem cell hybrid liposome using lyophilization, which may make an important step forward in enhancing the long-term stability of these promising biomimetic nanovehicle and ease the logistics and the freeze-storage in the potential clinical applications. This article is protected by copyright. All rights reserved.

Ultrafast Spectroelectrochemistry of the Catechol/o‐Quinone Redox Couple in Aqueous Buffer Solution

AbstractEumelanin is a natural pigment found in many organisms that provides photoprotection from harmful UV radiation. As a redox‐active biopolymer, the structure of eumelanin is thought to contain different redox states of quinone, including catechol subunits. To further explore the excited state properties of eumelanin, we have investigated the catechol/o‐quinone redox couple by spectroelectrochemical means, in a pH 7.4 aqueous buffered solution, and using a boron doped diamond mesh electrode. At pH 7.4, the two proton, two electron oxidation of catechol is promoted, which facilitates continuous formation of the unstable o‐quinone product in solution. Ultrafast transient absorption (femtosecond to nanosecond) measurements of o‐quinone species involve initial formation of an excited singlet state followed by triplet state formation within 24 ps. In contrast, catechol in aqueous buffer leads to formation of the semiquinone radical Δt>500 ps. Our results demonstrate the rich photochemistry of the catechol/o‐quinone redox couple and provides further insight into the excited state processes of these key building blocks of eumelanin.

CeO2·ZnO@biomass-derived carbon nanocomposite-based electrochemical sensor for efficient detection of ascorbic acid

Ascorbic acid (AA), a prominent antioxidant commonly found in human blood serum, serves as a biomarker for assessing oxidative stress levels. Therefore, precise detection of AA is crucial for swiftly diagnosing conditions arising from abnormal AA levels. Consequently, the primary aim of this research is to develop a sensitive and selective electrochemical sensor for accurate AA determination. To accomplish this aim, we used a novel nanocomposite comprised of CeO2-doped ZnO adorned on biomass-derived carbon (CeO2·ZnO@BC) as the active nanomaterial, effectively fabricating a glassy carbon electrode (GCE). Various analytical techniques were employed to scrutinize the structure and morphology features of the CeO2·ZnO@BC nanocomposite, ensuring its suitability as the sensing nanomaterial. This innovative sensor is capable of quantifying a wide range of AA concentrations, spanning from 0.5 to 1925 μM in a neutral phosphate buffer solution. It exhibits a remarkable sensitivity of 0.2267 μA μM−1cm−2 and a practical detection limit of 0.022 μM. Thanks to its exceptional sensitivity and selectivity, this sensor enables highly accurate determination of AA concentrations in real samples. Moreover, its superior reproducibility, repeatability, and stability underscore its reliability and robustness for AA quantification.

Effect of the global electroneutrality condition on electromigration Taylor-Aris dispersion in a microcapillary with finite Debye layer thickness.

In this work, the electromigration dispersion (EMD) due to the charged electrolytes in microchannels is considered without using the thin electrical double layer assumption. The electrokinetic flow and transport of ions are actuated within a rectangular micro-/nanochannel having a negative surface charge density under the influence of an external electric field. Due to the local variation of the conductivity and the nonvalidity of the electroneutrality condition, the local electric field varies as a function of the solute concentration, wall surface charge density, valency, and Debye layer length. The resulting electrokinetic flow due to the external electric field drives the fluid along with the charged species, where the Taylor-Aris dispersion separates the solutes into their different constituents. The local concentration dependence of the electric field leads to the formation of concentration profiles that are slightly asymmetric with respect to the standard Gaussian distribution. Including a finite Debye layer thickness has an effect on the advection of the species as well as the diffusion of the species. It is found that in cases where Debye layers are thicker, the species advects faster within the microchannel. This might give valuable insights into the nature of the EMD. Our model aims to predict the evolution of ionic concentration at all positions within the channel. A study of the higher-order statistics in skewness and kurtosis has also been conducted to obtain a better understanding of the idealized model consisting of a buffer solution.

Probing Chemical Equilibrium in Frozen Sodium Phosphate Buffer Solution by 31P Solid-State NMR.

Phosphate buffers are crucial for cryopreservative stability in pharmaceuticals, food processing, biomedical sciences, and biology. However, their freeze concentrates lack quantitative characterization, especially regarding the physicochemical properties of phosphate salt species in equilibrium at subzero temperatures. This study employs 31P solid-state NMR (ssNMR) to analyze frozen sodium phosphate (NaP) solutions, providing insights into phase composition, ionic strength, and pH. For the first time, we have directly quantified phosphate species in frozen NaP buffer, including crystallized disodium phosphate dodecahydrate (Na2HPO4·12H2O) content and the concentrations of H2PO4- and HPO42- in the freeze concentrate. This enabled the calculation of the pH as well as the ionic strength in the freeze concentrate. Trehalose effectively mitigated pH shifts in buffer solutions by preventing the selective crystallization of salt, a spectroscopic phenomenon not previously observed experimentally.

Effects of Structural Isomerism of Pyridine Monocarboxylic Acids on the Volume Properties of Their Buffer Solutions

Effects of Structural Isomerism of Pyridine Monocarboxylic Acids on the Volume Properties of Their Buffer Solutions

Design and application of Cd2+ polypeptide fluorescent probes based on Aggregation Induced Emission (AIE).

Cadmium is a toxic heavy metal, which is both an environmental pollutant, and a threat to human health. A fluorescent probe was developed to detect Cd2+ selectively, sensitively, and quickly. This study reports the successful development of a polypeptide fluorescent probe TPE-HC (TPE-His-Pro-Gly-Cys) which selectively detects Cd2+ by Aggregation-Induced Emission effect. After fluorescence excitation, Cd2+ can be effectively detected based on the change of fluorescence intensity. The detection limit of Cd2+ in buffer solution was determined to be 151 nM (R2 = 0.9933). This probe exhibits high sensitivity, high cell permeabilit y, and low biological toxicity, and can perform live cell imaging under biological conditions. This study indicates that TPE-HC can detect Cd2+ in biological environments.

Measurement and Characterization of the Electrical Properties of Actin Filaments

Actin filaments, as key components of the cytoskeleton, have aroused great interest due to their numerous functional roles in eukaryotic cells, including intracellular electrical signaling. The aim of this research is to characterize the alternating current (AC) conduction characteristics of both globular and polymerized actin and quantitatively compare their values to those theoretically predicted earlier. Actin filaments have been demonstrated to act as conducting bionanowires, forming a signaling network capable of transmitting ionic waves in cells. We performed conductivity measurements for different concentrations of actin, considering both unpolymerized and polymerized actin to identify potential differences in their electrical properties. These measurements revealed two relevant characteristics: first, the polymerized actin, arranged in filaments, has a lower impedance than its globular counterpart; second, an increase in the actin concentration leads to higher conductivities. Furthermore, from the data collected, we developed a quantitative model to represent the electrical properties of actin in a buffer solution. We hypothesize that actin filaments can be modeled as electrical resistor–inductor–capacitor (RLC) circuits, where the resistive contribution is due to the viscous ion flows along the filaments; the inductive contribution is due to the solenoidal flows along and around the helix-shaped filament and the capacitive contribution is due to the counterion layer formed around each negatively charged filament.

Dapagliflozin Improves Angiogenesis after Hindlimb Ischemia through the PI3K-Akt-eNOS Pathway.

Recently, the vascular protective effect of anti-diabetic agents has been receiving much attention. Sodium glucose cotransporter 2 (SGLT2) inhibitors had demonstrated reductions in cardiovascular (CV) events. However, the therapeutic effect of dapagliflozin on angiogenesis in peripheral arterial disease was unclear. This study aimed to explore the effect and mechanism of dapagliflozin on angiogenesis after hindlimb ischemia. We first evaluated the effect of dapagliflozin on post-ischemic angiogenesis in the hindlimbs of rats. Laser doppler imaging was used to detect the hindlimb blood perfusion. In addition, we used immunohistochemistry to detect the density of new capillaries after ischemia. The relevant signaling pathways of dapagliflozin affecting post-ischemic angiogenesis were screened through phosphoproteomic detection, and then the mechanism of dapagliflozin affecting post-ischemic angiogenesis was verified at the level of human umbilical vein endothelial cells (HUVECs). After subjection to excision of the left femoral artery, all rats were randomly distributed into two groups: the dapagliflozin group (left femoral artery resection, receiving intragastric feeding with dapagliflozin (1 mg/kg/d), for 21 consecutive days) and the model group, that is, the positive control group (left femoral artery resection, receiving intragastric feeding with citric acid-sodium citrate buffer solution (1 mg/kg/d), for 21 consecutive days). In addition, the control group, that is the negative control group (without left femoral artery resection, receiving intragastric feeding with citric acid-sodium citrate buffer solution (1 mg/kg/d), for 21 consecutive days) was added. At day 21 post-surgery, the dapagliflozin-treatment group had the greatest blood perfusion, accompanied by elevated capillary density. The results showed that dapagliflozin could promote angiogenesis after hindlimb ischemia. Then, the ischemic hindlimb adductor-muscle tissue samples from three rats of model group and dapagliflozin group were taken for phosphoproteomic testing. The results showed that the PI3K-Akt-eNOS signaling pathway was closely related to the effect of dapagliflozin on post-ischemic angiogenesis. Our study intended to verify this mechanism from the perspective of endothelial cells. In vitro, dapagliflozin enhanced the tube formation, migration, and proliferation of HUVECs under ischemic and hypoxic conditions. Additionally, the dapagliflozin administration upregulated the expression of angiogenic factors phosphorylated Akt (p-Akt) and phosphorylated endothelial nitric oxide synthase (p-eNOS), as well as vascular endothelial growth factor A (VEGFA), both in vivo and in vitro. These benefits could be blocked by either phosphoinositide 3-kinase (PI3K) or eNOS inhibitor. dapagliflozin could promote angiogenesis after ischemia. This effect might be achieved by promoting the activation of the PI3K-Akt-eNOS signaling pathway. This study provided a new perspective, new ideas, and a theoretical basis for the treatment of peripheral arterial disease.

Formulation and Evaluation of Betulin Loaded Transdermal Patches

Objectives: To develop and evaluate Transdermal patches of Betulin along with various polymers for controlled release action. Method: Suitable method such as Solvent Casting Technique of Film Casting Technique are used for preparation of Transdermal patch. Result: The prepared Transdermal patches were transparent, smooth, uniform and flexible. The method adopted for preparation of system was found satisfactory. Conclusion: Various formulations were developed by using hydrophilic and hydrophobic polymers like HPMC E5 and EC respectively in single and combinations by solvent evaporation technique with incorporation of penetration enhancer such as dimethylsulfoxide and dibutyl phthalate as plasticizer. Formulation F7 containing equal ratio of HPMC E5: EC (5:5) showed maximum percentage drug content 95.44%. A suitable UV Spectroscopy method for the analysis of Betulin was developed. Betulin showed maximum absorption at wave length 215 nm in isotonic phosphate buffer (pH 7.4) solutions. The pre-formulation studies involving description, solubility, melting point, partition coefficient of the drug were found to be comparable with the standard. The Transdermal patch of Betulin was prepared successfully by solvent evaporation method. Transdermal patch of Betulin for Transdermal drug delivery was evaluated. Calibration curve was obtained; Transdermal film was prepared, overcome limitations regarding bioavailability of drug was done. Keywords: Controlled DDS, Transdermal DDS, Betulin, Transdermal Patch, solvent evaporation method.

A new sensitive layer based on clcinated Zn/Ti-MOF/magnetic molecularly imprinted polypyrrole: Application to preconcentration and electrochemical determination of perfluorooctane sulfonic acid by magnetic carbon paste electrode

In this research, a new approach based on magnetic electrodes has been developed for the determination of per-fluorooctane sulfonic acid (PSOF). Zinc and Titanium-based Metal-organic framework (MOF) was synthesized and used with polypyrrole as a conductive polymer for preparation of the absorbent to achieve the best performance for electrochemical application. The response of the electrode for determination of the PFOS was affected and optimized by different factors such as buffer solution, pH of the solution, amount of absorbent, extraction time of absorbent, accumulation time, as well as the Square Wave Voltammetry (SWV) instrumental parameters including voltage step, pulse amplitude, frequency and resting time. In the optimum condition, the response of the Zn/Ti/C-MOF-magnetic molecular imprinting polymer/carbon paste electrode (MOFMMIP/CPE) has increased logarithmically by increasing the concentration in the range of 0.002–165 μM by the limit of detection (LOD) of 0.7 nM. The obtained percentage of Recovery (96.00–104.14 %), Bias (–4.00 - 4.14 %) and Relative Standard Deviation (RSD) (1.89–3.74 %) for determination of the PFOS in real and spiked tap water, river water and well water samples demonstrates that the proposed method has an acceptable precision. The comparison between the gained data by the presented method and High-performance liquid chromatography (HPLC) showed that the presented method has high accuracy.