Broadband Electromagnetic Wave Absorption Research Articles

Structural modification of mesoporous lanthanum oxide into 3D coral-like and nano needle-like structure for effective broadband microwave absorbing materials☆

Structural modification of three dimensional (3D) materials for the application of dielectric loss-based microwave absorbing materials (MAMs) usually relies on intricate synthesis process and can pose challenges in terms of scalability and mass production for practical application. In this work, we reported a successful attempt in modifying the 3D structure of mesoporous lanthanum oxide (La2O3) for effective broadband MAMs candidate via simple co-precipitation process. The inclusion of cetyl-trimethylammonium bromide (CTAB) and hydrothermal aging treatment result in a significant transformation of La2O3 particles from their original polygonal form to a 3D coral-like and nano needle-like structure. The utilization of CTAB and hydrothermal aging results in the increase of surface area and a two-fold increase in pore volume of the resulting La2O3. Due to its unique 3D structure, the 3D coral-like and nano needle-like La2O3 materials possess a broadband electromagnetic (EM) wave absorption characteristic with the effective absorption bandwidth (EAB) covering the C-band frequency range. Specifically, in the La2O3 C-H sample (with CTAB – with hydrothermal), it exhibits strong EM wave absorption with a reflection loss (RL) value of –33.07 dB which equals to 99.95% EM wave absorption at a thickness of only 1.50 mm. The detailed analysis of EM wave absorption properties reveals that the improvement of La2O3 materials to attenuate EM wave energy arises from the dielectric loss phenomenon, the enhanced interfacial polarization, multiple reflections mechanism, and conduction loss mechanism induced by the 3D structural formation of the La2O3 structure. This work proposes a novel and efficient approach in synthesizing and modifying 3D materials for effective broadband EM wave absorption.

Heterogeneous interface engineering of spindle shaped Fe/C through optimizing impedance response for enhanced microwave absorption and thermal conductivity

Heterogeneous interface design is pivotal in creating lightweight, broadband, and high-efficiency electromagnetic wave (EMW) absorption materials. These materials enhance wave absorption by adaptively matching impedance. In this study, spindle-shaped Fe/C nanocomposites with heterogeneous interfaces and diverse surface microtopographies were synthesized by calcining iron-supported metal-organic frameworks (MOFs). During controlled pyrolysis, Fe3+ was reduced by carbon and conversely induced the graphitization of carbon, which is essential for the distribution and appearance of Fe and graphitized carbon as well as for modulating impedance matching. The porous structure of the Fe/C composites and the polarization loss and ferromagnetic resonance from the defective carbon and Fe magnetic particles synergistically enhance the wave absorption performance. The Fe/C-700 nanocomposite achieves a reflection loss (RL) of −55.9 dB at 12.48 GHz with an effective absorption bandwidth (EAB, RL ≤ −10 dB) of 3.9 GHz at 1.8 mm. The Fe/C-900 nanocomposite demonstrates a significant RL of −63.5 dB at 15.8 GHz with an EAB of 4.4 GHz between 13.6 GHz and 18 GHz at 1.5 mm, and an EAB of 5.5 GHz at 1.63 mm. These improvements are attributed to the impedance matching facilitated by the introduction of Fe magnetic particles and graphitized carbon. Additionally, the thermal conduction pathway formed among the Fe/C nanocomposites significantly enhances the thermal conductivity to 0.502 W m−1 K−1. Thus, this work offers a novel approach to the design of advanced wave-absorbing and thermal conductive materials by optimizing impedance through heterogeneous interfaces.

Lightweight carbon fiber aerogel@hollow carbon/Co3O4 microsphere for broadband electromagnetic wave absorption in X and Ku bands

The increasing proliferation of modern communications, radar systems, and military equipment operating in the X and Ku bands (8–18 GHz) has exacerbated the issue of electromagnetic wave (EMW) pollution, highlighting the urgent need for lightweight, broadband EMW-absorbing materials. In this paper, the lightweight carbon fiber aerogel@hollow carbon/Co3O4 microsphere (CFA@H–C/Co3O4) were composed by ZIF-67 derived hollow carbon/Co3O4 microsphere and bamboo cellulose fiber derived carbon fiber aerogels and constructed by in-situ chemical deposition, dopamine treatment and pyrolysis. Carbon fiber aerogels form a lightweight three-dimensional (3D) interconnected conductive network, which expands the multiple reflection and absorption paths of EMW and increases the dielectric loss. The hollow carbon/Co3O4 microsphere inhibits the collapse of the structure by forming a polydopamine shell through the self-polymerization effect of dopamine on the surface of ZIF-67 during pyrolysis, showing dipole polarization loss, interface polarization loss and magnetic loss, which plays an important role in improving EMW polarization loss and optimizing impedance matching. The minimum reflection loss (RLmin) of CFA@H–C/Co3O4 reaches −43.5 dB at frequency of 12.88 GHz with thickness of 3.0 mm and the effective absorption bandwidth (EAB) of CFA@H–C/Co3O4 reaches 7.84 GHz (10.08–17.92 GHz) with thickness of 3.0 mm, covering most of X and Ku bands at a low filling ratio of 15 wt%. The radar cross-section (RCS) value of CFA@H–C/Co3O4 is 22.68 dB m2 lower than the perfect electrical conductor (PEC). This study provides valuable insights into materials that can improve the absorption bandwidth of electromagnetic waves in the X and KU bands.

Synergistically magnetic and dielectric properties of two dimensional Fe3Al@PPy lamellae exhibiting broadband and strong electromagnetic wave absorption

Addressing the issue of low impedance characteristics is essential to improve the electromagnetic wave absorption performance of magnetic materials. Herein, two dimensional Fe3Al@polypyrrole (PPy) lamellae with synergistic magnetic and dielectric properties are fabricated by a mechanical alloying, ordering transformation and polymerization process, which exhibits excellent electromagnetic wave absorption performance. By carefully controlling the thickness of the PPy shell, the optimized Fe3Al@PPy lamellae show a minimum reflection loss of −45.6 dB and an effective absorption bandwidth of 9.1 GHz at a thickness of only 1.5 mm. The conformal growth of Fe3Al@PPy lamellae can induce strong interfacial polarization, dipole polarization, multiple scattering effect and magnetic loss behaviors for the attenuation of electromagnetic waves. This study demonstrates a facile strategy for the development of efficient Fe3Al@PPy composite absorbents showing great potential for practical applications.

Mechanically strong SiC aerogels with broadband electromagnetic wave absorption enabled by hollow skeleton and interface engineering

SiC aerogels have great potential as thermal insulation materials and wave absorbers owing to high porosity and excellent dielectric properties. Recently, many SiC based electromagnetic wave absorbers with excellent performance have been developed. However, the coordination of thermal insulation, mechanics and electromagnetic wave absorption remains a challenge. Reasonable skeleton design and interface engineering are effective methods to overcoming this challenge. Herein, we report a mechanically strong SiC aerogel with hollow SiC microtube skeletons and SiC-SiO2 heterogeneous structures through engineering its microstructure by a simple continuous sintering-etching-annealing process. Accordingly, the aerogel exhibits excellent mechanical properties with a maximum compressive stress of 2.86 MPa. In addition, the aerogel shows an ultra-low thermal conductivity of 0.028 W/(m·K). More importantly, the aerogel exhibits a wide-band absorption band of 6.7 GHz at a matching thickness of 3.3 mm. Therefore, the findings of this study not only provide a simple method for the microstructure regulation of SiC aerogels but also provide a new technique to enhance electromagnetic wave absorption by using heterogeneous interface engineering.

RGO aerogel embedded with organic–inorganic hybrid perovskite for lightweight broadband electromagnetic wave absorption

rGO aerogel embedded with organic–inorganic hybrid perovskite for lightweight broadband electromagnetic wave absorption

Synthesis of Mo2C/C nanoclusters attached on rGO nanosheets for high-Efficiency electromagnetic wave absorption

It is an effective strategy that constructing composites with a multi-dimensional structure synergistically enhance their electromagnetic (EM) wave absorbing performance. Herein, a high-efficiency EM wave absorber of Mo2C/C nanoclusters uniformly encapsulated in rGO nanosheets (Mo2C/C-rGO) was prepared by a combination of the directing freeze-dry and subsequently carbothermal reaction method. Mo2C/C was in-situ induced from spherical phosphomolybdic acid/polypyrrole (PMo12/PPy) to result in a unique cluster-like microstructure. Abundant heterogeneous interfaces endowed the Mo2C/C-rGO composites with excellent EM wave absorption performance at a low filling ratio of 5 wt%. The minimum reflection loss (RL) value was −49.3 dB at 1.38 mm and the maximum effective absorption bandwidth (EAB, RL<-10 dB) was 5.12 GHz at 1.60 mm. The excellent performance was owing to the lamellar structure and abundant heterogeneous interfaces in Mo2C/C-rGO, lengthening the transmission path of the incident wave, as well as resulting in high conduction loss and interfacial polarization loss. This universal strategy would be extended to other absorbers with multi-interface structures for lightweight and broadband EM wave absorption.

Low-frequency and broadband electromagnetic wave absorption mechanism of (Hf0.2Zr0.2Ti0.2Ce0.2La0.2)C1-δ/PyC microspheres with hierarchy pores from 4 GHz to 17 GHz

Achieving low-frequency broadband electromagnetic wave absorption in extreme environments over 2000 °C is challenging. Biomimetic hierarchy materials of high entropy lanthanide carbides were designed to optimize electromagnetic wave absorption. Composite microspheres of (Hf0.2Zr0.2Ti0.2Ce0.2La0.2)C1-δ and SiC embedded in pyrolytic carbon (MC/PyC) were prepared by using the electro-spray method followed by heat treatment. The specimens of MC/PyC microspheres with a thickness of 2.5 mm exhibited a minimum reflection loss value of − 48.9 dB, and electromagnetic wave absorption from 4.0 GHz to 17 GHz. The enhanced absorption capability is attributed to the synergistic effect of dielectric losses from conduction and polarization, along with magnetic losses due to eddy currents and natural resonance of the high-entropy carbides within the multiscale pores. The composition and featured microstructure MC/PyC microspheres were noteworthily stable under the 2200 °C oxyacetylene ablation, ensuring consistent high-performance electromagnetic wave absorption even in harsh conditions.

In-Plane heterogeneous Structure-Boosted interfacial polarization in graphene for wide-band and wide-temperature microwave absorption

Theoretically, the strong permittivity dispersion characteristic of materials is essential for achieving broadband electromagnetic wave (EMW) absorption, which can be realized via amplified interfacial polarization effects between a dielectric phase and a lossy phase, such as by increasing the accumulated charge density in their interface area. Herein, we propose a novel strategy to boost interfacial polarization based on heterogeneous structure design in in-plane graphene (Gr) since the in-plane conductivity of Gr is significantly higher than its out-of-plane conductivity. To this end, Gr is grown on Si3N4 nanowires skeleton using chemical vapor deposition (CVD). Subsequently, Gr is controllably etched by Ni nanoparticles, and then, open graphite nanosteps are formed, which help construct in-plane heterogeneous interfaces between Gr and a dielectric phase. Such interfaces also help improve the impedance matching performance by disrupting the long-range conductive network of CVD-grown Gr. Notably, an effective absorption bandwidth of 8.48 GHz is achieved with a thickness of 2.85 mm, which is significantly wider than the EAB (5 GHz) of the out-of-plane heterogeneous structure. In addition, the in-plane heterogeneous structure also endows the EMW absorption material with excellent high-temperature insensitivity, realizing full-frequency absorption in the X-band in the 298–873 K range. This strategy to boost interfacial polarization via novel in-plane heterogeneous structure construction in Gr provides an alternative approach to explore the potential of Gr-based hybrids with planified structures to achieve wide-band and wide-temperature EMW absorption.

Micro-sized hexapod-like CuS/Cu9S5 hybrid with broadband electromagnetic wave absorption

Reasonable manipulation of component and microstructure is considered as a potential route to realize high-performance microwave absorber. In this paper, micro-sized hexapod-like CuS/Cu9S5 composites were synthesized via a facile approach involving the solvothermal method and subsequent sulfuration treatment. The resultant CuS/Cu9S5 exhibited superb microwave absorbing capacity with a minimum reflection loss (RLmin) of -59.38 dB at 2.7 mm. The maximum effective absorption bandwidth (EABmax) was 7.44 GHz (10.56–18 GHz) when the thickness was reduced to 2.3 mm. The outstanding microwave absorbing ability of CuS/Cu9S5 composites is mainly related to its unique hexapod shape and the formation of heterogeneous interfaces. The unique hexapod shape significantly promotes the multi-reflection of the incident electromagnetic wave (EMW) increasing the attenuation path of EMWs in the material. Heterogeneous interfaces between CuS/Cu9S5 enable powerful interface polarization, contributing to the attenuation of EMWs propagating in the medium. In addition, the EMW absorption performance of CuS/Cu9S5 composites is also inseparable from the conduction loss. This study provides a strong reference for the research of EMW absorbent materials based on transition metal sulfides.

Preparation of nitrogen-doped reduced graphene oxide/zinc ferrite@nitrogen-doped carbon composite for broadband and highly efficient electromagnetic wave absorption

Traditionally reduced graphene oxide (RGO)-based electromagnetic wave (EMW) absorbing materials have poor absorption effectiveness due to impedance mismatch caused by skin effect. The introduction of structural defects and the design of heterogeneous interfaces play a crucial role in enhancing the polarization effect of EMW absorbers. In this study, nitrogen-doped reduced graphene oxide/zinc ferrite@nitrogen-doped carbon (NRGO/ZnFe2O4@NC) ternary composite with rich heterogeneous interfaces is constructed by combining solvothermal reaction, in-situ polymerization, annealing treatment with subsequent hydrothermal reaction. The research results have shown that the obtained NRGO/ZnFe2O4@NC ternary composite exhibits a unique core-shell structure and excellent EMW absorption performance. At a thickness of 2.61 mm, the maximum effective absorption bandwidth can reach 7.2 GHz, spanning the entire Ku-band and a portion of the X-band, and the minimum reflection loss is –61.1 dB, which is superior to most reported RGO-based EMW absorbers. The excellent EMW absorbing ability is mainly ascribed to the optimized impedance matching and the enhanced polarization loss caused by the abundant heterogeneous interfaces and structural defects derived from heteroatomic nitrogen doping. Furthermore, the radar cross section in the far field is simulated by a computer simulation technique. This study provides a novel way to prepare core-shell magnetic carbon composites as highly efficient and broadband EMW absorbers.

MOFs-Derived Strategy and Ternary Alloys Regulation in Flower-Like Magnetic-Carbon Microspheres with Broadband Electromagnetic Wave Absorption

HighlightsMetal–organic frameworks-derived CoNiM@C (M = Cu, Zn, Fe, Mn) microspheres were successfully fabricated with custom-built magnetic alloy-carbon heterogeneous interfaces.Flower-like CoNiMn@C microspheres achieve broadband electromagnetic wave absorption with effective absorption bandwidth of 5.8 GHz at only 2.0 mm thickness.Visual interface charge distribution and hierarchical magnetic coupling were observed to elucidate the electromagnetic energy absorption mechanism.

Ultralight Hierarchical Fe3O4/MoS2/rGO/Ti3C2Tx MXene Composite Aerogels for High-Efficiency Electromagnetic Wave Absorption.

Aerogel-based composites, renowned for their three-dimensional (3D) network architecture, are gaining increasing attention as lightweight electromagnetic (EM) wave absorbers. However, attaining high reflection loss, broad effective absorption bandwidth (EAB), and ultrathin thickness concurrently presents a formidable challenge, owing to the stringent demands for precise structural regulation and incorporation of magnetic/dielectric multicomponents with synergistic loss mechanisms within the 3D networks. In this study, we successfully synthesized a 3D hierarchical porous Fe3O4/MoS2/rGO/Ti3C2Tx MXene (FMGM) composite aerogel via directional freezing and subsequent heat treatment processes. Owing to their ingenious structure and multicomponent design, the FMGM aerogels, featured with abundant heterogeneous interface structure and magnetic/dielectric synergism, show exceptional impedance matching characteristics and diverse EM wave absorption mechanisms. After optimization, the prepared ultralight (6.4 mg cm-3) FMGM-2 aerogel exhibits outstanding EM wave absorption performance, achieving a minimal reflection loss of -66.92 dB at a thickness of 3.61 mm and an EAB of 6.08 GHz corresponding to the thickness of 2.3 mm, outperforming most of the previously reported aerogel-based absorbing materials. This research presents an effective strategy for fabricating lightweight, ultrathin, highly efficient, and broad band EM wave absorption materials.

Carbon nanofiber aerogel microspheres with heterogeneous skin-core structure for broadband electromagnetic wave absorption

The advancement in the miniaturization of carbon aerogels into micro-sized spheres represents a significant development in the creation of ultralight, broadband microwave absorbers. Notwithstanding this innovation, there is still a considerable challenge in optimizing microwave absorption (MA) performance through heterointerface engineering within aerogel microspheres. Herein, we have developed skin-core heterogeneous aerogel microspheres by the in situ generation of ZIF-67 nanocrystals on the wet-spun aramid nanofiber (ANF) aerogel microspheres, followed by a high-temperature carbonization process. The resulting Co@C nanoparticle-enshrouded ANF-derived carbon nanofiber aerogel microspheres (Co@C/CNFAMs) demonstrate an exceptional equilibrium between impedance matching and multi-faceted attenuation. Remarkably, the Co@C/CNFAM2 sample attains a maximum effective absorption bandwidth of 8.72 GHz, while maintaining an ultralow filler proportion of 1.5 wt%. Moreover, the Co@C/CNFAM3 sample achieves a minimum reflection loss of −72.34 dB with a filling ratio of 1.2 wt%. Our findings offer a refined approach to the intricate engineering of heterostructures, along with the strategic macrostructural design, paving the way for the development of aerogel-based microwave absorbers that represent the next step in material science innovation.

3D-printed multi-material pyramids for broadband electromagnetic wave absorption

Designing and manufacturing broadband electromagnetic wave-absorbing materials represents one of the significant approaches to address electromagnetic pollution issues. This study utilizes three different PLA-based composite absorbing materials to prepare multilayer pyramid structures employing 3D printing technology. Results indicate that with material composition Z1-GT6-N8, material layer height (h) of 6 mm, and pyramid base length (L) of 36 mm, the fabricated structure achieves a minimum reflection loss of −24.19 dB with an effective absorption bandwidth of 14.21 GHz, demonstrating outstanding absorption performance. It is noteworthy that regardless of the incident angle increasing from 0° to 50°, the equivalent absorption bandwidth (EAB) for both transverse electric (TE) and transverse magnetic (TM) polarizations remains greater than 10 GHz, indicating excellent angle stability. The broadband and efficient electromagnetic wave (EMW) absorption characteristics exhibited by this absorber can be attributed to its outstanding impedance matching performance and the integration of multiscale loss mechanisms.

All-Around Electromagnetic Wave Absorber Based on Ni-Zn Ferrite.

Exploring a convenient, scalable, yet effective broadband electromagnetic wave absorber (EMA) in the gigahertz (GHz) region is of high interest today to quench its expanding demand. Ni-Zn ferrite is considered as a potential EMA; however, their performance study as a scalable effective millimeter-length absorber is still limited. Herein, we investigated EM wave attenuation properties of Ni0.5Zn0.5Fe2O4 (NZF) samples substituting Mn ion in place of Fe3+ as well as Zn2+ within a widely used frequency range of 0.1-9 GHz. Through composition optimization, Ni0.5Zn0.4Mn0.1Fe2O4 (NZM0.1F) EMA demonstrates excellent microwave absorption performance accompanied by simultaneous maximum reflection loss (RL) of -50.2 dB and wide BW of 6.8 GHz (with RL < -10 dB, i.e., attenuation >90%) at an optimum thickness of 6 mm. Moreover, the attenuation constant significantly increases from ∼217 to 301 Np/m with Mn doping. The key contribution arises from magnetic-dielectric properties synergy along with enhanced dielectric and magnetic losses owing to cation chemistry and site occupation in spinel NZF. In addition, porosity is induced in the system by a controlled two-step heat treatment process that promotes total loss with multiple internal reflections of the EM wave. Furthermore, RL is simulated by varying incident EM wave angles for the NZM0.1F sample displaying its angle insensitivity up to 50°. Our results reveal NZM0.1F as a futuristic environment-friendly microwave absorber material that is suitable for practical high-frequency applications.

Construction of CoO/Co9S8/NC composites with low-frequency and broadband electromagnetic wave absorption

Low-frequency electromagnetic wave absorption (EMWA) materials were crucial for addressing electromagnetic pollution and radar stealth. However, achieving low-frequency and broadband absorption still faces challenges. In this work, a succession of CoO/Co9S8/N-doped carbon (NC) composites were fabricated via a partial sulfidation strategy of Co-Prussian blue analogue (Co-PBA). The as-prepared CoO/Co9S8/NC composites featured a porous architecture. The electromagnetic parameters were effectively modulated via varying the sulfidation time. When the sulfidation time was 9 h, the minimum reflection loss (RLmin) value was −50.40 dB at 2.93 mm and a maximum effective absorption bandwidth value was 5.76 GHz (12.24–18.00 GHz) at 1.80 mm. Notably, when the sulfidation time was 12 h, the composites exhibited enhanced EMWA capability in the low-frequency S-band (3.52 GHz) with an RLmin value of −28.91 dB. The superior EMWA performance of composites were primarily attributed to appropriate dielectric constants and optimized impedance matching due to magnetic loss. Moreover, the radar cross section simulation consequences further verified that dissipation capability of electromagnetic wave of the CoO/Co9S8/NC composites in the actual far field. This work afforded novel perspectives into the rational develop of PBA-derived carbon-based EMWA materials with the low-frequency and broadband absorption.

Construction of 1D heterogeneous PPy@FeCo@PPy nanotubes with broadband and strong electromagnetic wave absorption

Developing nanomaterials with efficient electromagnetic wave absorption to eliminate increasingly serious electromagnetic pollution is of great significance. The peculiar electromagnetic characteristics of one-dimensional dielectric-magnetic heterostructures bring a promising strategy for designing high-efficiency absorber. Herein, a hierarchical PPy@FeCo@PPy nanotube was fabricated through a process of oxidative polymerization and electroless plating. In the product, the FeCo nanoparticles are encapsulate in the middle of the polypyrrole (PPy) dual conductive layers, which facilitates the deep construction of heterointerfaces and simultaneously prevents magnetic agglomeration. Furthermore, the hollow structure and suitable dielectric-magnetic component optimize impedance matching. Profiting from the reasonable structural design and the strong synergistic loss mechanism of dielectric-magnetic, the coaxial multi-shell PPy@FeCo@PPy nanotube exhibits prominent electromagnetic wave absorption performance, with a minimum reflection loss of −50.5 dB and the effective absorption bandwidth of 5.7 GHz at 2.0 mm. This work offers a gentle strategy for preparing ideal microwave absorbers by constructing dielectric-magnetic heterogeneous interfaces.

The hollow cubic octahedral structure of Fe3O4 with excellent electromagnetic wave absorption capacity

The unique nanostructure combined with high dielectric and magnetic losses is essential for electromagnetic wave (EMW) attenuation in microwave-absorbing materials (MAM). In this paper, using cubic octahedral Cu2O as a template, we synthesized hollow cubic octahedral Fe(OH)3 at first. After annealing at 450 °C, the hollow cubic octahedral structure Fe3O4 could be obtained. When the filling ratio was 40 %, the minimum reflection loss (RLmin) reached -66.08 dB, and the maximum effective absorption bandwidth (EAB) was 5.38 GHz at a thickness of 1.84 mm, exhibiting improved EMW properties compared with previous works. The hollow cubic octahedral structure of Fe3O4 enhances EMW absorption characteristics, which is attributed to abundant dipole polarization, interface polarization, and good conduction loss. These results indicate that Fe3O4 with the hollow cubic octahedral structure can be used as potential candidates for efficient and broadband EMW absorbers.

Broadband electromagnetic wave absorption properties of RGO cement-based composite

In this study, a cement-based composite was prepared using reduced graphene oxide (RGO) as a raw material via an ethanol liquid-phase mixing pre-dispersion process. The microstructure of cement-based composites with varying RGO contents was discussed, and a systematic investigation was conducted into the electromagnetic wave absorption (EWA) performance of RGO-cement composites within the frequency range of 2–18 GHz. The results indicate that the RGO content significantly impacts its wave absorption performance. Notably, at an RGO content of 3.0 wt%, the wave absorption performance experiences substantial enhancement. For instance, the minimum reflection loss (RLmin) of −48.33 dB at 8.9 GHz with a coating thickness of 2.6 mm is achieved, while an effective absorption bandwidth (EAB) of 5.02 GHz is attained with a thickness of only 1.6 mm, covering nearly the entire Ku-band. The incorporation of high specific surface area RGO into cement materials results in abundant interface polarization losses and additional electromagnetic wave transmission paths, effectively boosting the EWA performance. Consequently, these materials exhibit significant potential for applications in the field of electromagnetic wave shielding.