High-speed Railway Bridge Research Articles

Refined probabilistic seismic demand modeling of high-speed railway bridge under near-fault hanging-wall effects and velocity pulse effects by a novel ground motion selection approach

Refined probabilistic seismic demand modeling of high-speed railway bridge under near-fault hanging-wall effects and velocity pulse effects by a novel ground motion selection approach

Design and Seismic Performance Study of Multistage Controllable Isolation Bearing for High-Speed Railway Simply Supported Beam

The high-speed railway (HSR) system imposes stringent requirements for track smoothness. However, conventional seismic isolation bearings frequently fail to meet these demands. To address this challenge, a novel seismic isolation bearing was developed based on the principle of functional separation design. This innovative bearing effectively achieves the multistage control objectives, including amplitude limitation to ensure track smoothness during frequent earthquakes, energy dissipation to guarantee train running safety during design earthquakes, and structural integrity maintenance to prevent beam collapse during rare earthquakes. Firstly, an overview of the novel isolation bearing’s structural design and operational principle is provided. Subsequently, a corresponding mechanical model is formulated, with the parameters of the new bearing determined through finite element analysis. The study then compares the seismic performance of the general rubber bearing and the new bearing, using an HSR simply supported bridge as an engineering background. The dynamic response of the bridge under varying seismic waves, pier heights, and bridge spans is meticulously analyzed. The results indicate that the new bearing can achieve multistage control. Compared to general bearings, it reduces bridge displacement vibration by over 46.4% under frequent, design, and rare earthquakes. The bridge deformation under frequent earthquakes remains below 3 mm, thus meeting the track smoothness requirements for normal HSR operations. Additionally, the study reveals that higher pier heights increase the seismic response, peaking at 15 m. The vibration reduction provided by the new bearing varies but remains effective in most earthquake scenarios, with maximum reductions of 92.9% for displacement and 74.17% for bending moment. Furthermore, larger bridge spans also increase the seismic response, with the 24 m span bridge outperforming the 32 m span bridge. In conclusion, the novel seismic isolation bearing significantly enhances the seismic performance of HSR bridges, ensuring train running safety and operational reliability.

Experimental Study on the Flexural Performance of the Corrosion-Affected Simply Supported Prestressed Concrete Box Girder in a High-Speed Railway

Prestressed concrete box girders are commonly employed in the development of high-speed railway bridge constructions. The prestressed strands in the girder may corrode due to long-term chloride erosion, leading to the degradation of its flexural performance. To examine the flexural performance of corrosion-affected simply supported prestressed concrete box girders, eight T-shaped mock-up beams related to the girders used in the construction of high-speed railway bridges were manufactured utilizing similarity theory. Seven of the beams underwent electrochemical accelerated corrosion, and then each beam was subjected to failure under the four-point load test method. Measurements recorded and analyzed in detail during the loading process included the following: crack propagation, crack width at various loads, crack load, ultimate load, deflection, and concrete strain of the mid-span section. The results demonstrate that a corrosion rate of just 8.31% has a considerable impact on the structural integrity of the beams, as evidenced by a pronounced reduction in flexural cracks and a tendency towards reduced reinforcement failure. Furthermore, the corrosive process has a detrimental effect on mid-span deflection, ductility, and ultimate flexural bearing capacity, which could have significant implications for bridge safety. This study provides valuable insights for the assessment of flexural performance and the development of appropriate maintenance strategies for corroded simply supported box girders in high-speed railways.

Damage Analysis of High-Speed Railway Bridge-Track System with Unequal Pier Heights Under Near-Fault Earthquake Based on FK-FE Method

ABSTRACT Canyons have a significant influence on near-fault earthquakes, and near-fault earthquakes exhibit strong amplitude and large spatial variability. In turn, this causes the damage and deformation of the high-speed railway (HSR) bridge-track system with unequal pier heights, which affects the normal service of the unequal pier heights bridge and the safe running of the train. This study investigates the damage and deformation of HSR bridge-track systems with unequal pier height in canyon areas under near-fault seismic based on FK (frequency wavenumber)-FE (finite element) method. It aims to offer suggestions for seismic design in canyon regions of HSR unequal pier height bridges. First, a finite fault kinematic hybrid source model and a canyon site model were established, and the FK-FE hybrid method was employed to simulate the three-dimensional (3D) site motion considering the full process of the seismic source-propagation medium-complex site (SSPC). Then, the influence of near-fault earthquakes and the canyon topography on the spatial distribution of near-fault ground motions were analyzed, and the non-uniform near-fault seismic excitation at the bottom of each pier considering the canyon topography effect was obtained. Finally, a nonlinear dynamic FE model of the HSR bridge-track system was established, and its damage patterns and mechanism in canyon near-fault earthquakes were analyzed. The results indicate that near-fault earthquakes in the canyon exhibit significant vertical and sliding effects with significant spatial variability and the FK-FE method can provide more accurate ground motion input. The seismic damage to HSR bridge-track systems increases as the fault distance decreases, and topography effects further aggravates seismic damage to HSR bridges. Moreover, vulnerable areas in the track system are often found at girder ends. Therefore, for HSR bridges in canyon regions, seismic input needs to comprehensively consider the effects of near-fault earthquakes and topography, with post-earthquake focus on damage assessment at girder ends.

Analysis of concrete damage at anchorage end of the high-speed railway bridge sound barrier under the 400 km/h train-induced wind loads

The sound barrier installed on high-speed railway bridges withstands repeated train-induced wind load, which may lead to concrete damage at its anchorage end. This paper focuses on the assessment of concrete static damage at the sound barrier anchorage end under train-induced wind loads. The nonlinear finite element model of the sound barrier anchorage system is established to analyze the stress distribution, strain distribution and static damage of concrete structure at the anchorage end under 400 km/h train-induced wind loads in respect of different bolt preloads. The simulated results illustrate that both mortar and concrete near bolt holes suffer a certain degree of tensile and compressive damage. The maximum tensile and compressive damage factor values for mortar and concrete are 0.930, 0.643 and 0.892, 0.434 respectively. In addition, the effects of train-induced wind load on the internal force of the sound barrier anchorage take nearly no account, with a maximum of only 0.68 %. The results indicate that bolt preload is the most significant factor for concrete static damage, while the train-induced wind load appears negligible. An appropriate bolt preload can avoid the concrete static damage of the sound barrier anchorage end, and guarantee the structural stability of the sound barrier.

Parametric modeling and engineering application of the high-speed continuous beam bridge based on Building Information Modeling.

To improve the informatization and intelligence level of high-speed railway (HSR) bridge construction, a parametric modeling method for continuous beam bridges based on Building Information Modeling (BIM) is proposed in this study. By this method, the parametric families of continuous beam components and key construction machinery are established, and the rapid modeling of overall continuous beam bridge and the simulation of critical construction process are realized as well. Taking the Caoxian-Shangqiu bridge of Xiong'an-Shangqiu HSR as a case study, the parametric modeling method is applied to conduct the engineering application on the prestressed duct layout and rebar clash detection. The results indicate that the modeling efficiencies of HSR continuous beam bridge and construction machinery are significantly increased by the established parametric modeling method. Based on the BIM model of continuous beam bridge, the improvement in the precision of prestressed duct layout and the elimination of rebar clash points can be achieved. The research achievement can guide the visualization of construction disclosure, enhance construction efficiency, and provide reference and technical support for the construction management and control of HSR continuous beam bridges.

Analysis of train-induced aerodynamic characteristics and pressure-relief measures relating to fully enclosed noise barriers installed on railway bridges

Fully enclosed noise barriers (FENBs) are increasingly being installed on high-speed railway bridges for noise pollution control. However, the aerodynamic effects of high-speed trains passing FENBs have an adverse impact on barrier durability and generate micro-pressure waves. In this paper, a numerical model of a train passing an FENB on a bridge is established. The aerodynamic pressure distribution along the FENB is analyzed for both a single train and two trains passing one another. The propagation characteristics and evolution mechanisms of pressure waves are then investigated. The results show that the pressure is lower at the ends of the FENB and higher in the middle along the direction of train travel. The peak positive and negative pressures at the mid-span are 1.95 and 4.47 times higher than those at the ends, respectively. This distribution is caused by the propagation, superposition, reflection, and attenuation of pressure waves. Compression waves account for 78.9% of the peak positive pressure. An amplification factor must be considered when estimating the impact of two trains passing one another. Analysis of five pressure-relief schemes shows that arranging a single pressure-relief hole at a high-pressure location effectively alleviates the over-pressure in the FENB. The overall pressure-relief effect is an exponential function of the single opening area. Considering a constant opening area, arranging several relief holes at equal spacing optimizes the adverse pressure distribution compared with the single-hole relief scheme. The equivalent forces of the multi-hole scheme are 3.35% and 7.58% lower than in the single-hole scheme.

Probabilistic Prediction on Seismic Responses of a Long-Span High-Speed Railway Bridge Using BPINN

Efficient probabilistic prediction of seismic responses is crucial for assessing the seismic-resistant capability of long-span continuous girder high-speed railway bridges. Thus, a Bayesian physics-informed neural network (BPINN) is adopted to rapidly and effectively predict the probabilistic seismic responses of such bridges. The BPINN model combines deep learning and physics to improve the accuracy and consistency of predictions, while also quantifying the uncertainties using Bayesian inference methods. Various seismic excitations, including pulse, far-field and near-field types, are employed to probabilistically predict the seismic responses of the top of bridge pier. Evaluation metrics, including mean squared error and prediction interval coverage probability, are used to assess the deterministic and probabilistic estimates of BPINN. Results demonstrate that BPINN performs better in deterministic results for far-/near-field ground motions compared to pulse-like earthquakes, with most cases exhibiting a close approximation to the 95% confidence interval. The flexibility and adaptability of BPINN in handling different types of ground motions can provide valuable insights for assessing the seismic performance of such structures.

Automatic crack detection method for high-speed railway box girder based on deep learning techniques and inspection robot

Box girders serve as crucial upper-level load-bearing components in high-speed railway simply-supported bridges, requiring sufficient structural rigidity during operation. The occurrence of cracks compromises the overall stiffness of the structure, posing significant safety risks and potentially leading to substantial loss of life and property. Therefore, it is essential to rapidly and accurately detect cracks within the girder structure, particularly in the interior of box girders where access for maintenance by personnel is inconvenient. To address this issue, this paper proposes a robot-based framework for crack detection in high-speed railway box girder, and accurately evaluate the damage status of structures. This comprehensive framework includes an image generation network for generating high-quality crack images, a lightweight object detection algorithm for rapidly identifying crack targets, and a high-precision semantic segmentation algorithm for accurately extracting crack pixels. Comparative analysis with mainstream algorithms validates the superiority of the proposed methods. Moreover, preliminary validation through simulated tests highlights the feasibility of the proposed framework, offering novel method and theoretical support for the intelligent operation and maintenance of high-speed railway bridge structures.

Drive-by damage detection methodology for high-speed railway bridges using sparse autoencoders

Drive-by damage detection methodology for high-speed railway bridges using sparse autoencoders

Evaluation Method of the Impact of Twin Shield Tunneling Construction on Elevated Bridges: Case Study

In urban metro construction, shield tunneling often needs to pass through building and bridge pile foundations, potentially affecting the stability of existing structures. Therefore, accurately assessing the impact of shield tunneling on bridges and buildings is crucial. This study presents a comprehensive prediction method combining numerical simulation and empirical formulas, taking the underpass project of the Shijiazhuang–Wuhan High-Speed Railway Bridge by Zhengzhou Metro Line 5 as a case study. Three-dimensional numerical model calculations were performed using finite element software to analyze the displacement and stress changes of buildings and tunnel structures at different construction stages, revealing the deformation patterns of buildings adjacent to the tunnel during shield tunneling. In particular, the ground settlement caused by twin-tunnel excavation was compared with Peck’s empirical formula to verify the reliability of the numerical simulation. The results show that twin-tunnel excavation exacerbates the horizontal displacement, uplift, and settlement of the ground, with maximum deformation rates increasing by 7.10%, 20%, and 11.4%, respectively. Comparing the ground deformation results of Peck’s empirical formulas with numerical calculations revealed similar trends in the settlement curves, with a maximum deviation of 6.67%. It can be concluded that using Peck’s empirical formula to calculate ground deformation characteristics complements the limitations of numerical simulations, making the assessment results more reliable. The findings of this study demonstrate that integrating numerical simulation with empirical formulas significantly enhances the reliability of deformation predictions in complex tunneling scenarios. This research not only offers a comprehensive safety assessment method for shield tunneling construction but also provides valuable guidance for the design and construction of similar projects, serving as a theoretical reference for future engineering endeavors.

Railway Alignment Optimization and Seismic Responses of High-Speed Railway Bridge Considering the Spatial Effects of Mountainous-Plateau

Topographic effects significantly influence the propagation of seismic activity; however, research on the differences between mountainous and plateau terrains remains scarce. This paper focused on the 2008 Wenchuan earthquake, analyzing a five-span high-speed railway simply supported by a bridge through dynamic time-history analysis. Stations were categorized into mountainous and plateau groups based on their average shear wave velocity for the top 30[Formula: see text]m ([Formula: see text] values and elevation, aiming to explore the impact of terrain differences on seismic actions by comparing structural responses between the two groups. This study revealed an exponential relationship between structural responses and the rupture distance ([Formula: see text])/peak ground acceleration (PGA), with a rapid decrease in response when [Formula: see text]/PGA was below 100 and subsequent stabilization. Additionally, the sites were segmented into three zones according to the epicentral distance. The findings highlighted that the average PGA value of the mountain group was 2.7 times that of the plateau group in Region I, and the value decreased to 1.93 times that in Region II. However, the average PGA value of the plateau group slightly exceeded that of the mountain group in Region III. By comparing the PGA values of stations with similar fault distances within these regions, it was discovered that elevation could amplify seismic motion up to 4.59 times for smaller fault distances, with minimal amplification effects observed for larger fault distances. Finally, by examining damage to key components such as rails, beams, bearings, and piers and employing the kriging interpolation method to produce a regional seismic response cloud map, instances of high-speed railways constructed post-Wenchuan earthquake serve as evidence to corroborate the findings.

Leveraging Multi-Temporal InSAR Technique for Long-Term Structural Behaviour Monitoring of High-Speed Railway Bridges

The effective monitoring of railway facilities is crucial for safety and operational efficiency. This study proposes an enhanced remote monitoring technique for railway facilities, specifically bridges, using satellite radar InSAR (Interferometric Synthetic Aperture Radar) technology. Previous studies faced limitations such as insufficient data points and challenges with topographical and structural variations. Our approach addresses these issues by analysing displacements from 30 images captured by the X-band SAR satellite, TerraSAR-X, over two years. We tested each InSAR parameter to develop an optimal set of parameters, applying the technique to a post-tensioned PSC (pre-stressed concrete) box bridge. Our findings revealed a recurring arch-shaped elevation along the bridge, attributed to temporal changes and long-term deformation. Further analysis showed a strong correlation between this deformation pattern and average surrounding temperature. This indicates that our technique can effectively identify micro-displacements due to temperature changes and structural deformation. Thus, the technique provides a theoretical foundation for improved SAR monitoring of large-scale social overhead capital (SOC) facilities, ensuring efficient maintenance and management.

Riding safety prediction of a high-speed train running on transition zone under foundation settlement

The settlement of piers and subgrade bending deformation are widely recognized as common issues in the transition zones of high-speed railway bridges. This study aims to investigate the settlement behavior within these transition zones and its impact on the dynamic interaction between trains and the track. To achieve this, a vehicle-track-transition zone mapping relationship model is developed to analyze both the settlement behavior and the resulting dynamic response characteristics. The study employs the finite element method and multi-body dynamics to construct the simulation model. Settlement effects are simulated using the Newton-Raphson iterative method, with the additional rail deformation caused by foundation settlement serving as the excitation for the vehicle-track-transition zone dynamic interaction system. In the numerical analysis, the dynamic effects of three key factors—train speed, transition zone length, and the amplitude of foundation settlement—are examined based on the performance of the vehicle-track-transition zone interaction. The time-frequency technique is utilized to comprehensively reveal and clarify the spatial-frequency characteristics of system responses influenced by settlement excitation. Moreover, the relationship between the safety-based settlement threshold and these three factors is calibrated.

Study on Vibration and Noise of Railway Steel–Concrete Composite Box Girder Bridge Considering Vehicle–Bridge Coupling Effect

A steel–concrete composite beam bridge fully exploits the mechanical advantages of the concrete structure and steel structure, and has the advantages of a fast construction speed and large stiffness. It is of certain research value to explore the application of this bridge type in the field of railway bridges. However, with the rapid development of domestic high-speed railway construction, the problem of vibration and noise radiation of high-speed railway bridges caused by train loads is becoming more and more serious. A steel–concrete composite beam bridge combines the tensile characteristics of steel and the compressive characteristics of concrete perfectly. At the same time, it also has the characteristics of a steel bridge and concrete bridge in terms of vibration and noise radiation. This feature makes the study of the vibration and noise of the bridge type more complicated. Therefore, in this paper, the characteristics of vibration and noise radiation of a high-speed railway steel–concrete composite box girder bridge are studied in detail from two aspects: the theoretical basis and a numerical simulation. The main results obtained are as follows: Relying on the idea of vehicle–rail–bridge coupling dynamics, a structural dynamics analysis model of a steel–concrete combined girder bridge for a high-speed railroad was established, and numerical program simulation of the vibration of the vehicle–rail–bridge coupling system was carried out based on the parametric design language of ANSYS 18.0 and the language of MATLAB R2021a, and the structural vibration results were analyzed in both the time domain and frequency domain. By using different time-step loading for the vehicle–rail–bridge coupling vibration analysis, the computational efficiency can be effectively improved under the condition of guaranteeing the accuracy of the result analysis within 100 Hz. Based on the power flow equilibrium equation, a statistical energy method of calculating the high-frequency noise radiation is theoretically derived. Based on the theoretical basis of the statistical energy method, the high-frequency noise in the structure is numerically simulated in the VAONE 2021 software, and the average contribution of the concrete roof plate to the three acoustic field points constructed in this paper is as high as 50%, which is of great significance in the study of noise reduction in steel–concrete composite girders.

Advances in research on the ballast bed stability on railway bridges

The rapid development of high-speed railway bridges in China has brought enormous challenges to the ballast bed stability on the bridge. With the increase in the bridge span, the bridge deformation under the temperature load increases gradually, as well as the stability difference of ballast bed between different regions. Moreover, the track vibration response under high-speed driving conditions is larger, which can easily cause differential settlement, flying ballast, and deterioration of the ballast bed, thereby affecting the bearing capacity and stability of the ballast bed. In view of this, this article summarizes relevant research work on a ballast bed on the bridge from the perspectives of the resistance, deformation, and acceleration response of the ballast bed. In addition, this study discusses the existing measures for improving the ballast bed stability on the bridge, including the optimization of the sleeper and ballast bed structures. Finally, the main issues that need to be addressed to improve the ballast bed stability on the bridge are pointed out, and ideas for future research on ballast beds on bridges with different spans and structures are proposed.

Field survey and analysis on near-fault severely damaged high-speed railway bridge in 2022 M6.9 Menyuan earthquake

Field survey and analysis on near-fault severely damaged high-speed railway bridge in 2022 M6.9 Menyuan earthquake

Study on train safety control of high-speed railway bridge under the action of near-fault earthquake

In order to study the effect of the velocity pulse on the dynamic response of the train-bridge system of the high-speed railway simple supported beam bridge, the velocity pulse is simulated by the trigonometric function method and superimposed with the far-field earthquake without pulse to synthesize the pulse with different pulse types, pulse periods and pulse peaks. A 10×\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\ imes$$\\end{document}32m typical high-speed railway simple supported beam bridge is considered an case illustrating study. Then, the dynamic response of train-track-bridge coupling system is calculated by train-track-bridge seismic analysis software TTBSAS. Afterwards, the influence of pulse near-field earthquakes parameters and vertical components on dynamic response of train-bridge system and the safety of the train on the bridge are discussed in detail.The new derailment evaluation index is adopted to evaluate driving safety under earthquakes. The train safety control of simply supported beam bridge under the action of near-field earthquake is studied. The results show that the impact of pulse ground motion on the dynamic response of the train-track-bridge coupling system is significantly higher than that of no-pulse ground motion, especially the impact on the bridge and rail subsystem is more significant than that of train subsystem. Under the excitation of ground motion intensity of 0.05g∼\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\sim$$\\end{document}0.15g, the safe speed threshold of pulse near-field ground motion is smaller than that of far-field ground motion. When the ground motion intensity is 0.20g∼\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\sim$$\\end{document}0.30g, the safe speed threshold of pulse near-field ground motion and far field ground motion is 200km/h. So, the pulse near-field earthquake poses a greater threat to the safety of the train on the bridge than the far-field earthquake. Therefore, the influence of pulse near-field earthquakes should be considered in the seismic design. The research results of this paper can provide theoretitcal support for the design of a high-speed railway bridge in the near-field area.

An improved model for the nonlinear simulation of the high‐speed vehicle‐track‐bridge coupling system under seismic shaking

AbstractWith the continuous development of high‐speed railway (HSR) construction technology, many HSR bridges are close to near‐fault earthquake zones. Due to the short warning time for earthquakes occurring in these areas, the scene of trains running on the HSR bridges under earthquakes will become more and more common. In order to effectively evaluate the train running safety performance on the HSR bridge under earthquakes, an improved model for the nonlinear simulation of the high‐speed vehicle‐track‐bridge (VTB) coupling system under seismic shaking is proposed. The commercial finite element software was utilized for the general modeling of track‐bridge structure, and nonlinear hysteric behaviors of key components were realized by using the local nonlinearity correction method. By adopting the unconditional stable explicit dynamic integration algorithm and an efficient wheel–rail contact model, an explicit dynamic solution framework is established. It can efficiently solve the nonlinear coupled vibration of the VTB system under earthquakes. Finally, based on the improved model developed in this paper, the influence of hysteretic behaviors of bridge bearings on the nonlinear coupling vibration of the VTB system under near‐fault earthquakes is discussed.

Noise reduction mechanism of high-speed railway box-girder bridges installed with MTMDs on top plate

The issue of low-frequency structural noise radiated from high-speed railway (HSR) box-girder bridges (BGBs) is a significant challenge worldwide. Although it is known that vibrations in BGBs caused by moving trains can be reduced by installing multiple tuned mass dampers (MTMDs) on the top plate, there is limited research on the noise reduction achieved by this method. This study aims to investigate the noise reduction mechanism of BGBs installed with MTMDs on the top plate. A sound radiation prediction model for the BGB installed with MTMDs is developed, based on the vehicle–track–bridge coupled dynamics and acoustics boundary element method. After being verified by field tested results, the prediction model is employed to study the reduction of vibration and noise of BGBs caused by the MTMDs. It is found that installing MTMDs on top plate can significantly affect the vibration distribution and sound radiation law of BGBs. However, its impact on the sound radiation caused by vibrations dominated by the global modes of BGBs is minimal. The noise reduction achieved by MTMDs is mainly through changing the acoustic radiation contributions of each plate of the bridge. In the lower frequency range, the noise reduction of BGB caused by MTMDs can be more effective if the installation of MTMDs can modify the vibration frequency and distribution of the BGB to avoid the influence of small vibrations and disperse the sound radiation from each plate.