The objective of this study was to measure the differences in color and color parameters between dental porcelain and porcelain-repairing resin composites. The colors of three shades (A2, A3, A3.5) of one brand of dental porcelain, three original shades (A2, A3, A3.5), and three combinations (A2/A3, A3/3.5, A2/A3.5) of three brands of porcelain-repairing resin composites (ABT, FSP, TCR) were measured. The specimens were 2 mm thick, and 1 mm of each shade was layered to make combined shades. Differences in color (DeltaE(ab) (*)), lightness (DeltaL*), chroma (DeltaC(ab) (*)), and hue (DeltaH(*)) between porcelain and resin composite were calculated. Color difference was calculated as DeltaE(ab) (*) = (DeltaL*(2) + Deltaa*(2) + Deltab*(2))(1/2), chroma difference was calculated as DeltaC(ab) (*) = (Deltaa*(2) + Deltab*(2))(1/2), and hue difference was calculated as DeltaH(ab) (*) = (DeltaE(ab) (*2) - DeltaL*(2) - DeltaC(ab) (*2))(1/2). The influence of porcelain shade, brand of resin composites, and shade of resin composites were analyzed by three-way analyses of variance, and the differential influence of color parameters on color difference was analyzed with multiple regression analysis (alpha = 0.05). Differences in color and color parameters were influenced by the porcelain shade, brand and shade of resin composites. The DeltaE(ab) (*) value was in the range of 2.2-16.9. The DeltaE(ab) (*) value was correlated with DeltaC(ab) (*) (standardized correlation coefficient, beta = - 0.85), DeltaL* (beta = - 0.52), and DeltaH(ab) (*) (beta = 0.08). Between the same shade designated pairs of porcelain and repairing composite, color difference was perceptible. Therefore, studies to improve the color matching between porcelain and repairing resin are recommended.