Braided River Research Articles

A fluvial‐aeolian system in response to aridification during the Late Mesozoic, Junggar Basin, Central Asia

AbstractAridification of Central Asia in the Late Mesozoic led to drastic environmental changes characterized by widespread aeolian deposits. We systematically investigated fluvial‐aeolian deposits in the Middle Jurassic Toutunhe Formation, Upper Jurassic Kalazha Formation, and Lower Cretaceous Tugulu Group in the Junggar Basin to the north of the Tianshan Orogenic Belt via unmanned aerial vehicle‐based photogrammetry, scanning electron microscope, grain‐size analysis, and detrital zircon geochronology. Paludal and deltaic environments transitioned to a fluvial‐aeolian environment from the late Middle Jurassic to the Late Jurassic. Fan delta and incisive braided river deposits accumulated in the earliest Cretaceous and evolved into a lacustrine environment with aeolian deposits in the lakeshore. Aeolian deposits are characterized by moderate‐ to well‐sorted and subangular to subround sandstones with large‐scale, high‐dip cross‐bedding, inversely graded lamination, dominant saltation grains, crescent‐shaped, and dish‐shaped impact structures. Aeolian deposits contain heavy minerals including more ilmenite, zircon, garnet, and, tourmaline and less magnetite and epidote than the fluvial deposits. The preserved aeolian sediments of the Kalazha Formation extend west–east for more than 100 km, suggesting a wide desert area during the latest Jurassic. The detrital zircon age patterns indicate that the provenance of the aeolian deposits was similar to that of coeval fluvial deposits. The cooccurrence of fluvial and aeolian deposits and the similar provenances but orthogonal flow directions indicate that the aeolian deposits were mainly sourced from the nearby fluvial material within the basin. The evolution of the fluvial‐aeolian system responded to a complete base‐level cycle controlled by the aridification and tectonics. Due to decreased sediment supply caused by aridification, the base level rose, leading to the change from braided rivers to meandering rivers, along with the deposition of aeolian sediments. Due to the tectonic reactivation in the Late Jurassic, the base level fell, causing the occurrence of alluvial fans and the expansion of the aeolian sediments. Previous studies revealed that the Tianshan in the Jurassic exhibited low relief. The fluvial‐aeolian system played an important role in maintaining the limited relief in southern Central Asia.

Effect of Acid Fluid on Deep Eocene Sweet Spot Reservoir of Steep Slope Zone in Lufeng Sag, Pearl River Mouth Basin, South China Sea

The Paleogene system of the Zhuyi Depression exhibits a pronounced mechanical compaction background. Despite this compaction, remarkable secondary porosity is observed in deep clastic rocks due to dissolution processes, with well-developed hydrocarbon reservoirs persisting in deeper strata. We conducted a comprehensive study utilising various analytical techniques to gain insights into the dissolution and transformation mechanisms of deep clastic rock reservoirs in the steep slope zone of the Lufeng Sag. The study encompassed the collection and analysis of the rock thin sections, XRD whole-rock mineralogy, and petrophysical properties from seven wells drilled into the Eocene. Our findings reveal that the nature of the parent rock, tuffaceous content, dominant sedimentary facies, and the thickness of individual sand bodies are crucial factors that influence the development of high-quality reservoirs under intense compaction conditions. Moreover, the sustained modification and efficient expulsion of organic–inorganic acidic fluids play a main role in forming secondary dissolution porosity zones within the En-4 Member of the LF X transition zone. Notably, it has been established that the front edge of the fan delta, the front of the thin layer, and the near margin of the thick layer of the braided river delta represent favorable zones for developing deep sweet-spot reservoirs. Furthermore, we have identified the LF X and LF Y areas as favourable exploration zones and established an Eocene petroleum-accumulation model. These insights will significantly aid in predicting high-quality dissolution reservoirs and facilitate deep oil and gas exploration efforts in the steep slope zone of the Zhuyi Depression.

Fracture identification in shale reservoir using a deep learning method: Chang 7 reservoirs, Triassic Yanchang formation

Natural fractures in shale oil formations play a significant role in fluid flow channels. However, their identification can be difficult due to the problems of subtle log responses of fractures and impact of sedimentary cycles on logging curve. To address these issues, a fracture identification method (FRNN) based on deep learning is proposed. FRNN combines window sliding and bidirectional recurrent neural networks (BiLSTM). A large number of sequence data samples from logs are obtained through window sliding, denoted with fracture labels based on rock core observations or borehole image log interpretation. BiLSTM processes sequences bidirectionally to mitigate the impact of sedimentary cycles on well logging curves and amply log responses caused by fractures. The integration of the sliding process and BiLSTM endeavors to address the challenge of fracture identification, which is often marked by significant uncertainty and subtle log responses. The experiments employ a dataset from Triassic Yanchang Formation's Chang 7 reservoirs in Q Oilfield, China, which contains shales and sandstones formed in braided river delta lacustrine systems that act as oil reservoirs. The statistical analysis and blind well test show that the fracture identification by the proposed FRNN method is consistent with those of core descriptions. Furthermore, examination of wellbore cross-sections reveals a congruence between the anticipated vertical distribution of fractures and the influencing factors thereof, thus validating the efficacy of the proposed methodology. The findings of this study can provide assistance in subsurface fracture modeling and hydraulic fracturing operations, etc.

Compaction-induced porosity loss in the Cretaceous Bima Formation around Lakwaime and Dogon Dutsi, Yola Subbasin, Northern Benue Trough, NE Nigeria

The Bima Sandstone is an alluvial fan to braided river sedimentation that represents purely a siliciclastic depositional system. It is the oldest formation and the main reservoir unit in the entire Benue Trough. Porosity loss is an essential component of petroleum reservoirs that needs to be properly investigated for the purpose of hydrocarbon exploitation. Compaction and cementation processes are partly responsible for porosity loss in many known reservoirs around the world. Outcropping units of the formation around Lakwaime and Dogon Dutsi in Yola Sub-basin have been subjected to an integrated approach involving field observations, petrographic analysis and porosity measurements in order to understand the contribution of each of the processes. Modal composition of the samples shows that they are mostly lithic arkose to feldspathic litharenite, with quartz as the most common detrital mineral grain. Grain fracturing has been attributed to mechanical compaction, whereas grain contacts like sutured and concavo-convex are products of chemical compaction. The average values of compactional-porosity loss (COPL), cementational-porosity loss (CEPL), and compaction index (ICOMPACT) in the studied samples stand at 19.51%, 4.18% and 0.82 respectively. The study indicates that the role of compaction in porosity loss is greater than that of cementation as shown by the COPL-CEPL diagram and, as such considered to be generally responsible for the porosity loss in Bima Sandstone.

Geochemical and palynological records of the Early‐Middle Jurassic in the Turpan‐Hami Basin, NW China: Implications for paleoenvironment and paleoclimate change

The Early‐Middle Jurassic is one of the crucial coal‐forming geologic periods in the world and an important target for hydrocarbon exploration in the Turpan‐Hami Basin, China. The paleoenvironment and vegetation reconstruction of the Early‐Middle Jurassic have been investigated using elemental geochemistry and palynological analysis to reveal paleoclimate evolution. A total of 48 genera of pteridophyte spore and 35 genera of gymnosperm pollen were identified, and 5 palynological assemblages were longitudinally divided, which showed significant differences in geochemical behaviours. The paleoenvironment was a transition from suboxidation to anoxia and then to an oxidation environment under freshwater conditions. The paleowater in the northern Taibei Sag was deeper than that in the southern part during the Middle Jurassic, which coincided with the sedimentary background of the sublacustrine fan in the north and the shallow braided river delta in the south. The paleovegetation evolved from mixed lowland–upland forest in the Hettangian‐Toarcian, to lowland fern forest in the Aalenian‐Bajocian, to upland conifers forest in the early Bathonian, to upland Cheirolepidiaceae forest in the late Bathonian‐Callovian. The Toarcian and Bathonian‐Callovian arid climate and the Hettangian‐Pliensbachian and Aalenian‐Bajocian warm‐humid climate were responses to the continued global warming events and the intensification of the East Asian monsoon circulation, respectively. The influence of the Bathonian‐Callovian aridification event on the sedimentary response in the southern Taibei Sag will be delayed due to the gradual southward migration of the depositional centre.

Paleodepositional environments, lithostratigraphic bounding surfaces and basin-fill model of Mundeck Formation in Yabassi, NE Douala sub-basin

Lithofacies, sedimentologic and x-ray analytical techniques were employed to reconstitute paleodepositional environments, bounding surfaces and basin-fill model of Mundeck Formation during Lower Cretaceous in Yabassi, NE Douala sub-basin. The basin-fill comprises fissile gravel, sand and mud (GSF) facies from which eighteen sub-facies were identified and grouped under five facies associations (FA1-FA5). These correspond to alluvial settings (FA1), braided channels (FA2), cross-bedded tidal channels (FA3), ephemeral fluvio-lacustrine lake with short-lived marine incursion (FA4), fluvial channels with deeply incised erosional surfaces (FA5). Four hierarchical lithostratigraphic bed bounding surfaces were defined; incipient or intraformational hardgrounds, erosional surfaces abutted by ripped-up mud clasts, an obvious transgressive surface marked by the occurrence of ammonitic in lamellibranch and gastropod-rich silty-mudstones and shales. Humid and warm climates during Lower Cretaceous could be inferred from secondary mineral suites: clays (kaolinite, chlorite, illite and smectite); oxides (hematite and hydralsite); and oxy-hydroxides (goethite). Hematite-rich incipient hardgrounds surfaces depict warm and dry climates, while paleosols suggest channel abandonment, subaerial exposure and pedogenetic processes. Sediment transport regimes have evolved from low velocity cohesive flow regime in braided channels and overbank to high velocity and cohesion-less flow regime in multi-storey cross-bedded sand bars. Granulometric results reveal angular to sub-rounded, coarse-grained to gravelly clast sizes with unimodal, bimodal- and trimodal distributions, whereby all analyzed samples are positively skewed towards fine-grained sands. Morphoscopic analysis reveals 65–90% of very angular to angular and shinning quartz (VAAS), compared to 10–35% sub-angular and sub-rounded (SASR) and 0% rounded (R) shapes which indicate short transport distance from source areas. Sorting index (So) and deviation quartile (dQ) values of analyzed sands vary from 1.52 to 2.89, and 0.38–0.88 respectively and are indicative of moderate to very poor sorting.

Jurassic sedimentary evolution model and its implication for the sandstone-type uranium mineralization in the Kamusite area in eastern Junggar Basin, NW China

The Junggar Basin in the northern Xinjiang Province, northwestern China, is a large hydrocarbon basin with tremendous reserves of oil, gas and coals. Tens of sandstone-type uranium showings, occurrences and/or anomalies have also been discovered in the Junggar Basin since the 1960s, yet hitherto only one large uranium deposit, the Kamusite deposit, has been identified in the Middle Jurassic Toutunhe Formation sandstones in the eastern part of the basin. Sand bodies with high-permeability are the prerequisite for the formation of the in situ leachable sandstone-hosted uranium deposit, nevertheless the spatial distribution and genetic types of the sand bodies, as well as the deposition model in Jurassic time in the Kamusite area both remain unclear, which largely hindered the understanding of the sedimentary evolution and uranium exploration directions in the region.In this contribution, based on the outcrop observation, core logging and well logging data interpretation, and comprehensive analysis, the sedimentary characteristics, sedimentary facies types, sand body morphology, plane distribution characteristics, as well as the sedimentary evolution history in Jurassic time in the Kamusite area have been illustrated in details. From early to late, the Jurassic sediments in Kamusite can be divided into the Badaowan, Sangonghe, Xishanyao, Toutunhe and Qigu formations, of which the sand bodies favorable for the sandstone-type uranium mineralization have been systematically analyzed, and the depositional model in the Kamusite area have been established. The Early Jurassic Badaowan Formation is a set of coal-bearing coarse-grained clastic sediments of the braided river–braided river delta facies, followed by the lake transgression and fine-grained lacustrine deposition in the Sangonghe Formation. The Middle Jurassic Xishanyao Formation is a set of braided river delta facies coal-bearing clastic sediments, while the uranium orebody-bearing Toutunhe Formation underwent the paleoclimate transition from warm and humid to hot and arid, and developed a set of braided river delta to meandering river facies sequences with an overall positive sedimentary rhythm. The Qigu Formation is dominated by a series of meandering river to lacustrine facies fine-grained sediments and largely denuded by later tectonic activities. Three sets of sand bodies favorable for the sandstone-type uranium mineralization are recognized, including those in the lower Toutunhe Formation, the lower Xishanyao Formation, and the upper Badaowan Formation, from bottom to top. A four-stage sedimentary evolution model from the Badaowan Formation to the Toutunhe Formation has been established thereafter, and general exploration suggestions were proposed in the last of the contribution. More drilling is recommended to the south of the Kalasayi Fault, aiming the lower Toutunhe, lower Xishanyao and upper Badaowan formations. To the north of the Kalasayi Fault, more uranium mineralization could also be expected, and the exploration is suggested to focus on the Jurassic Toutunhe, Xishanyao formations and Cretaceous Tugulu Group.

Inferring channel incision in gravel‐bed rivers: Integrating LiDAR data, historical aerial photographs and drone‐based SfM topo‐bathymetry

AbstractChannel incision is an evident trend for river evolution in many European rivers and notably the Western Carpathians, whose former braided and multichannel wandering river system is transforming into a single‐thread channel, but it is often difficult to separate drivers and determine if incision is finished or is still ongoing. To overpass these research gaps, this paper presents an innovative approach to assess the multidecadal incision of the Belá River in the Western Carpathians since 1949 by LiDAR‐based analyses of floodplain surfaces above the river channel dated from historical aerial images. Detailed analyses of ongoing incision were also calculated based on DEM of differences (DoD) using Structure‐from‐Motion (SfM) photogrammetry‐derived topo‐bathymetric models. The study applied the BACI (Before‐After‐Control‐Impact) approach that compared pre‐state (Before), post‐state (After) and reach (Control) that is not affected by potential external effects with degraded (impacted) reach to be able to distinguish the driver effects. Floodplain channel surface analyses indicate the maximum incision up to 4 m and incision rate of 5.7 cm/year that occurred in the most degraded reach. Moreover, cross‐section profiles point to accelerated incision of 24.5 cm/year in the last 10 years (2011–2021) by the propagation of incision upstream. Overall, the net changes from the UAV survey pointed to 22 759 m3 of gravel sediments, constituting outwash from the 1.6 km long channel system (2015–2022) by incision, whereas analyses of historical channel surfaces estimated erosion of 573 303 m3 from impacted reaches between 1949 and 2020. Incision evidence is only observed in the downstream part below the control section due to local drivers (channel regulation, comprising embankment and gravel mining that activated a backward erosion of the system with knickpoint migration upstream). This analysis shows the benefits of combining different sources of data to separate long‐term and ongoing channel responses and the BACI‐approach to better target cause–effect relationships in space and time.

Distribution patterns and controlling factors of beach bars in Qinghai Lake, NW China

The significance of beach-bar reservoirs, which are intricately linked to unconventional hydrocarbon reservoirs, has gained increased attention. This study elucidates the complex mechanisms governing the formation, spatial distribution, and morphological characteristics of beach bars in Qinghai Lake, NW China, highlighting the interplay of lake-level fluctuations, wind wave dynamics, sediment provenance, and terrain gradient. Our findings reveal that large-scale lake-level fluctuations primarily dictate the initial formation settings of beach bars, while small-scale fluctuations refine their internal stratification and sedimentary features. Wind wave dynamics play a critical role in defining suitable depth zones for beach bar development, influencing their morphology and resulting in distinct sedimentary characteristics across different lake zones. Furthermore, the study categorizes beach bars into three main systems based on sediment provenance—bedrock, alluvial fan (fan delta), and braided river systems—each exhibiting unique compositional and structural attributes. Terrain gradient around the lake significantly affects beach bar formation, with areas having a gradient less than 0.7° being particularly favorable. This research advances our understanding of lacustrine beach bar dynamics, offering insights into their potential as indicators of past environmental conditions and their implications for hydrocarbon exploration. The comprehensive analysis of controlling factors provides a foundation for predicting beach bar distribution and contributes to the broader field of sedimentary geology by integrating multi-disciplinary approaches to study lacustrine sedimentary processes.

A Numerical Expedition through the Mathematical Representation of Complex Braided Morphometry—A Case Study of Brahmaputra River in India

The present work explores the process of mathematical representation for the complex geometry of a wide alluvial river with high braiding intensities. It primarily focuses on an approach to developing a numerical solution algorithm for representing the complex channel geometry of the braided Brahmaputra River. Traditional elliptic PDEs with boundary-fitted coordinate transformation were deployed, converting the non-uniform physical plane into a transformed uniform orthogonal computational plane. This study was conducted for the river channel reach with upstream and downstream nodes at Pandu and Jogighopa (reach length ~100 km), respectively, within the Assam flood plain in India, with fourteen measured river cross-sections for the year of 1997. The geo-referenced image covering the river stretch in 1997 was delineated using a ArcGIS software 9.0 tool by digitizing the bank lines. Stream bed interpolation was conducted by interpolating bed elevation from a bathymetrical database onto code-generated mesh nodes. Discretization of the domain was performed through the developed computer code, and the bed-level matrix was generated by the IDW method as well as the MATLAB tool using the nearest neighborhood technique. A mathematical representation of a digital terrain model was thus developed. This generated model was employed as a geometrical data input to simulate secondary flow utilizing 2D depth-averaged equations with the flow dispersion stress tensor as an extra source component, coming from curvilinear flow patterns caused by severe river braiding. The developed model may further be useful in mathematically representing the geometrical complexities of braided rivers with a relatively realistic assessment of the various parameters involved if deployed with improved river modeling with morphometric evolution.

Geomorphic changes after the 2021 Central European flood in the Ahr Valley by LiDAR-based differences

BackgroundIn July 2021, destructive floods in Western Europe were triggered by enormous precipitation rates related to a low-pressure system named "Bernd." These catastrophic events led not only to major damage to infrastructure, severe economic losses, and the loss of lives but also to significant landscape changes and modifications. Here, we focus, as a case study, on the flood aftermath of the Ahr Valley in Rhineland-Palatinate state in western Germany, as it was one of the most affected and destroyed regions by the flood. We utilize high-resolution Digital Terrain Models (DTMs) based on airborne Light Detection and Ranging (LiDAR) that were taken shortly before and after the flood to investigate insights into geomorphic changes. ResultsBy calculating Digital Terrain Models of Difference (DoD), we are able to quantify volumetric and areal changes caused by erosional and depositional processes for different sites in the Ahr Valley. Due to the morphology of the narrow Ahr Valley, most of the erosion and deposition is located within the deeply incised canyon of the Ahr River. The comprehensive analysis reveals notable morphological modifications throughout the study area, with a calculated erosion/deposition areal ratio of 0.46 and an erosion/deposition volumetric ratio of 0.63. Our findings indicate massive deposition regarding both areal and volumetric. We selected six different locations along the Ahr Valley that showcase distinct aspects of flood-induced fluvial morpho-dynamics. Deposition occurred mainly in point bars and downstream of destroyed artificial levees, in a braided river style.ConclusionOur investigations contribute to an overview and assessment of the morphological response to the destructive flood in the Ahr Valley. The results emphasize the necessity for implementing effective flood management strategies, as most of the urban areas in the Ahr Valley were flooded. Moreover, our results provide valuable insights into the impacted areas, highlighting vulnerable locations for flood-related erosion and deposition. This information could contribute to future mitigation and protection efforts, aiding in the development of comprehensive strategies to minimize the impact of similar events in the future.

Spatial heterogeneity of Cenozoic provenance in the Nima and Lunpola basins of China: Implications for the origin of the low-relief topography in central Tibet Plateau

The central Tibet Plateau is characterised by low-relief topography of high elevation; however, the origin of this surface flatness is uncertain because of a lack of reliable evidence from palaeogeography and palaeodrainage. In this study, we conduct sedimentological and provenance analysis of the Nima Basin, one of several terrestrial basins developed along the Bangong–Nujiang suture zone since the middle Eocene. Our data show that the Dingqinghu Formation in the Nima Basin was deposited in fan delta, braided river and lacustrine environments in the late Eocene after 37 Ma. It received sediment consisting mainly of recycled detritus, including orbitolinid-bearing limestone with volcanic fragments from the Lhasa Terrane in the south. Comparison of the stratigraphic sections in the Nima Basin with those of the adjacent Lunpola Basin suggests that these regions are characterised by local but similar provenance signals. We suggest that a source-to-sink system once existed from the shallower Nima Basin eastward to the deeper and bigger Lunpola Basin. We hypothesise that the Oligocene–early Miocene source-to-sink system from the Nima to Lunpola may have played a role in the surface flattening of the central Tibet Plateau.

Does a braided river aggrade or degrade in response to changes in water and sediment fluxes?

Braided rivers undergo continuous morphological evolution in response to variations in water and sediment fluxes associated with a plethora of natural and anthropogenic disturbances, which has to date remained poorly understood. Here, a one-dimensional hydro-sediment-morphodynamic model is proposed for braided rivers. It is built upon an extended synthetic channel geometric model which encodes the essential, three-dimensional morphological information into a one-dimensional synthetic channel. It is first applied to the Rees River (New Zealand) to investigate overall morphological evolution (aggradation/degradation) during a single flood event. It is shown that the channel tends to degrade with increasing peak discharge and decreasing sediment supply, while the effect of baseflow discharge on aggradation/degradation is negligible unless the baseflow discharge exceeds a critical value. Then the proposed model is applied to resolve long-term morphological evolution in the Tuotuo River (China) reach (up to the year 2050), the source region of the Yangtze River, in response to projected water and sediment fluxes. Sustained degradation in the river reach is observed. The present study yields a viable physics-based method to predict overall aggradation or degradation of braided rivers under unsteady water and sediment fluxes over both short and long time scales.

Topography‐Based Particle Image Velocimetry of Braided Channel Initiation

AbstractRiver channels shape landscapes through gradual migration and abrupt avulsion. Measuring the motion of braided rivers, which have multiple channel threads, is particularly challenging, limiting predictions for landscape evolution and fluvial architecture. To address this challenge, we extended the capabilities of image‐based particle image velocimetry (PIV)—a technique for tracking channel threads in images of the surface—by adapting it to analyze topographic change. We applied this method in a laboratory experiment where a straight channel set in non‐cohesive sediment evolved into a braided channel under constant water and sediment fluxes. Topography‐based PIV successfully tracked the motion of channel threads if displacements between observations were less than the channel‐thread width, consistent with earlier results from image‐based PIV. We filtered spurious migration vectors with magnitudes less than the elevation grid spacing, or with high uncertainties in magnitude and/or direction. During braided channel initiation, migration rates varied with the channel planform development, showing an increase as incipient meanders developed, a decrease during the transitional braiding phase, and consistently low values during the established braiding phase. In this experimental setup, migration rates varied quasi‐periodically along stream at the half scale of initial meander bends. Lateral migration with respect to the mean flow direction was much more pronounced than streamwise migration, accounting for approximately 80% of all detected motion. Results demonstrate that topography‐based PIV has the potential to advance predictions for bank erosion and landscape evolution in natural braided rivers as well as bar preservation and stratigraphic architecture in geological records.

Depositional Facies and Sequence Stratigraphy of Kodiak Butte, Western Delta of Jezero Crater, Mars

AbstractHigh‐resolution 2D and 3D data remotely acquired by SuperCam's Remote Micro‐Imager and Mastcam‐Z aboard the Perseverance rover enabled us to characterize the stratigraphic architecture and sedimentary record of the Kodiak butte, an isolated remnant of the western delta fan of Jezero crater. Using these data, we build up on previous interpretations of the butte interpreted as a prograding Gilbert‐type deltaic series. We characterize three individual stratigraphic Units 0 to 2 on the eastern and northern faces of the butte. Each Unit displays the same vertical succession of prodeltaic/lacustrine bottomsets, delta slope toesets and foresets, and fluvially influenced topsets of a deltaic plain with a braided river pattern, shown by 11 individual sedimentary facies. We infer that these individual Units record the formation of three distinct deltaic mouth bars successively across time and space. For the first time on another planet than Earth, we are able to construct a precise sequence stratigraphic framework to highlight lake‐level fluctuations at the time the Kodiak butte was emplaced, during the latest stages of deltaic activity. We identify four hydrogeological cycles indicated by alternating rises and falls of the lake‐level on the order of 5–10 m. These were most probably linked to climatic events and variations controlling lake water inputs in probable relation to an astronomical control.

Geological History Reconstruction using Stratigraphic Analysis: A Case Study of Kampung Baru, West Sumatra

The reconstruction of geological history includes the development of rocks and volcanic deposits on a depositional pattern consisting of various types of sedimentary materials accumulated over a long time, which involves depositional changes. Depositional changes require geological comprehension in analyzing and understanding the geological processes involved in their evolution. For this reason, stratigraphic analysis is a very relevant approach to discussing rock layers, including significant environmental changes during their geologic history. The purpose of this research is to find out the geological processes that have contributed to the formation of the earth in the past. The method in this research is a stratigraphic analysis carried out from field observation data carried out directly at the outcrop. Deposition began with the re-deposition of the Pre-Tertiary (Triassic)-aged Porphyry Quartz Dasite Formation. In the Late Oligocene Epoch, the Sawahtambang Formation was deposited, which formed in the braided river characterized by the presence of sedimentary structures in the form of lamination and cross lamination. In the Early Miocene to Middle Miocene, the transgression process occurred, where the change in deposition was caused by the supply of larger land sediments that caused the deposition of the Ombilin Formation to be deposited in the marine environment of the Transition-Nerritic Edge based on the bathymetry results. The research results are expected to enable geological information to gain in-depth knowledge and experience about the history of deposition and assist in geological modeling.

Comprehensive Facies Analysis and Depositional Environments of the Kikim Formation, Garba Mountain, South Palembang Subbasin, Indonesia

This study provides an exhaustive facies analysis of the Kikim Formation within the Garba Mountain area of the South Palembang Subbasin, emphasizing the stratigraphic significance and depositional environments during the Paleogene period. Utilizing field data collected from the Bumi Agung and Batu Belang measurement lines, this research categorizes various lithofacies using Miall’s (1978) classification scheme, identifying eight distinct lithofacies and four facies associations indicative of a predominantly fluvial depositional setting. The results depict a detailed sedimentological framework, showing that the Kikim Formation was characterized by a braided river system with significant gravel and sandstone deposits. This analysis not only sheds light on the geological history and processes shaping the South Sumatra Basin but also enhances the understanding of its potential hydrocarbon reservoirs. By detailing the lithological diversity and facies distribution, this paper contributes to the broader geological knowledge required for effective exploration and management of the region's natural resources.

Evolution of the Pingluo Section of the Upper Yellow River over the Past 50 Years: Responses to Environmental Change and Human Activity

The instability of the river channels has increased in response to the combined effects of global warming and human activity. This instability threatens the lives and property of people who live along river courses. This study takes the Pingluo section of the upper Yellow River, which is ~28 km long and ~400 m wide, as its research focus. We studied 11 periods of Landsat remote sensing images from 1973 to 2023 and analyzed the evolutionary characteristics of the Pingluo section over the past 50 years. The channel morphology indices included the channel braiding index (BIT), the bar braiding index (BIB), the average area of the bar (Ab), and the width of the wet channel area (BW). The results showed that there was an overall shrinking trend in this section of the Yellow River; more particularly, fluctuations in indicators such as the river width and the braiding index highlighted an increasing–decreasing–increasing pattern of change. During the 1973–1986 period, the river showed a widening trend, with narrow anabranches cutting through the floodplain and both the river width and the braiding index increasing dramatically over a short period. Over the 1986–2018 period, the area of the wet channel continued to shrink to its lowest level for the past 50 years, the river’s branches were diverted and abandoned, and the channel tended to straighten out. Between 2018 and 2023, the river showed a slightly expanding trend. The evolution of the river channel appears to be related to regional human activity and climate change. For example, after the joint filling of the Longyangxia and Liujiaxia reservoirs in the upper reaches of the Pingluo section of the Yellow River in 1986, runoff and sediment load along this section decreased, flood events became less frequent, and the channel tended to contract. In addition, the increase in extreme precipitation events over the last five years has led to an increase in the magnitude and frequency of peak discharge values in the region, which is the main reason for the increase in the river braiding index and area.

Temporal variation of braided intensity and morphodynamic changes in a regulated braided river using 2D modeling and satellite images

AbstractThe river morphology of a braided‐type river is rather complex. High sediment transport rates and frequently changing discharges are the cause of dynamic planform evolution. Over the past few decades, scientific attention has been directed toward understanding the coexistence of alternating bars and the consequent emergence of confluences and divergences, all of which interact intricately with the process of bank erosion. It is still rather challenging to estimate or predict the total sediment transport rate in this type of river, especially by considering various hydrologic data and climate effects. This study is focused on the reach of the Devoll River in Albania, located upstream of the Banja dam. Understanding the morphodynamics of this river reach holds significance due to the expanding delta upstream of the dam reservoir. The objectives of the two‐dimensional depth‐averaged approach of the present study are to investigate the temporal variation of braided intensity of Devoll River and the effect of using a discharge hydrograph from hydrologic data compared to the regulated one from the upstream dam on the morphodynamics and sediment transport of the river. After evaluating various parameters such as 11 different sediment transport functions, the best results were reached for a cell size of 5 × 5 m2, Manning roughness coefficient of 0.03, Meyer‐Peter and Müller's sediment function, Hayashi et al. (1980) hiding function, and Van Rijn bed roughness predictor in this study. In addition, the results of comparing satellite images and modeling the river from 2019 to 2023 show that the braided index decreased, and this can be due to the fact that the real scenario of the river has a regulated discharge compared to the non‐regulated discharge from hydrologic data, in the mentioned period.

Fluvial Morphology in Different Permafrost Environments—A Review

This review presents a synthesis of the interaction between the hydro-morphological processes on interfluves and channels within fluvial catchments in permafrost regions. Both in modern and ancient permafrost catchments, this integrated landscape is quite diverse because of a variegated extent of frozen ground, density of vegetation cover, snow thickness, and other local factors. Moreover, temporal changes in environmental conditions are expressed in the morphological evolution of catchments. Channel patterns vary between single- and different multi-channel forms while the interfluves show a high diversity ranging from complete stability to intense denudation by surface runoff. It appears that braided channels, despite their high energy, were only significant during short intervals of peak discharge and transported only limited amounts of eroded sediment, while other channel patterns required more subdued annual discharge variability. Further, denudational processes on interfluves were a specific characteristic of landscape evolution during subsequent ice ages, especially in conditions of snow-rich and poorly vegetated, seasonal frost, or discontinuous permafrost resulting in the formation of extended planforms (cryopediments). In contrast, interfluves appeared to be rather stable on continuously frozen soils.