Boundary Strength Research Articles

PWOs repress gene transcription by regulating chromatin structures in Arabidopsis.

PWWP-DOMAIN INTERACTOR OF POLYCOMBS (PWO) family proteins play a vital role in regulating plant development. However, the molecular mechanisms of how PWOs regulate chromatin structure is elusive. Our data show that the PWO1 binding sites are enriched with positive modifications but exclusive with H3K27me3. Moreover, PWO1 binds to the H3K27me3-enriched compartment domain (H3K27me3-CD) boundary regions, and functions to maintain the boundary strength. Meanwhile, we found that PWOs and Polycomb repressive complex 2 (PRC2) function parallelly in maintaining H3K27me3-CDs' structure. Loss of either PWOs or PRC2 leads to H3K27me3-CD strength reduction, B to A compartment switching as well as the H3K27me3-CD relocating away from the nuclear periphery. Additionally, PWOs and lamin-like proteins collaborate to regulate multiple chromatin structures to repress gene transcription within H3K27me3-CDs. We conclude that PWOs maintain H3K27me3-CDs' repressive state and regulate their spatial position in the nucleus.

The Relationship between Event Boundary Strength and Pattern Shifts across the Cortical Hierarchy during Naturalistic Movie-viewing.

Our continuous experience is spontaneously segmented by the brain into discrete events. However, the beginning of a new event (an event boundary) is not always sharply identifiable: Phenomenologically, event boundaries vary in salience. How are the response profiles of cortical areas at event boundaries modulated by boundary strength during complex, naturalistic movie-viewing? Do cortical responses scale in a graded manner with boundary strength, or do they merely detect boundaries in a binary fashion? We measured "cortical boundary shifts" as transient changes in multivoxel patterns at event boundaries with different strengths (weak, moderate, and strong), determined by across-participant agreement. Cortical regions with different processing timescales were examined. In auditory areas, which have short timescales, cortical boundary shifts exhibited a clearly graded profile in both group-level and individual-level analyses. In cortical areas with long timescales, including the default mode network, boundary strength modulated pattern shift magnitude at the individual participant level. We also observed a positive relationship between boundary strength and the extent of temporal alignment of boundary shifts across different levels of the cortical hierarchy. In addition, hippocampal activity was highest at event boundaries for which cortical boundary shifts were most aligned across hierarchical levels. Overall, we found that event boundary strength modulated cortical pattern shifts strongly in sensory areas and more weakly in higher-level areas and that stronger boundaries were associated with greater alignment of these shifts across the cortical hierarchy.

Correlations between local chemical fluctuations and grain boundary strength in Ti-Zr-Nb-Ta-Mo refractory multi-principal element alloys

Ti-Zr-Nb-Ta-Mo refractory multi-principal element alloys typically exhibit high yield strength while tensile ductility tends to be poor. In this study, we found that even after solid solution treatment of Ti-Zr-Nb-Ta-Mo alloys, significant change in ductility occur due to the local chemical fluctuations. Ta's dramatic chemical fluctuations cause variations in atomic-scale strain fields, leading to reduced grain boundary strength and brittle fracture. First-principles calculations show that (Ti, Zr)-rich at the grain boundaries increases the delocalization of valence electrons, leading to longer bond lengths and reduced crystal orbital bond index values, thereby causing grain boundary embrittlement. Our findings explore the root causes of brittleness in Ti-Zr-Nb-Ta-Mo alloys at the atomic and electronic scales, providing not only a method to analyze grain boundary embrittlement using bond length, electronic localization function and crystal orbital bond index, but also a theoretical guidance for improving the mechanical properties via grain boundary structure optimization.

Study on Low‐Cycle Fatigue Behavior and Life Prediction of Cr–Ni–Mo–V Gun Steel at Room Temperature and 600 °C

ABSTRACTIn this paper, the low‐cycle fatigue fracture behavior and life prediction of Cr–Ni–Mo–V gun steel at room temperature and 600 °C are studied. The results indicated that at room temperature and 600 °C, the Cr–Ni–Mo–V gun steel exhibited obvious monotonic softening and cyclic softening. This behavior could be attributed to the formation of dislocation networks, dislocation walls, dynamic recovery, and dynamic recrystallization. As the temperature increased, the failure mode gradually shifted from mixed transgranular and intergranular fractures to intergranular fractures possibly owing to the reduced grain boundary strength and easy oxidation of the grain boundary at high temperatures. In addition, the fatigue life prediction model considering the influence of temperature is established by using the energy dissipation quadratic function, offering a practical method to improve the fatigue performance evaluation of Cr–Ni–Mo–V gun steel at various temperature.

Sink strength of grain boundaries for point defects in irradiated ferritic/martensitic steel

Dislocation-free ferritic/martensitic steel: F82H was prepared by heat-treatment in the appropriate condition in order to investigate the sink strength of grain boundaries for point defects. The size and the areal density of irradiation-induced secondary defects, such as dislocation loops and voids, were investigated in electron-irradiated F82H. The in-situ irradiation experiment resulted in the formation of a defect free zone and the gradient distribution of loop and cavity as a function of distance from boundaries, especially around prior austenite grain boundaries. The atomic density ratio of grain boundary planes is a key parameter in determining the width of defect free zone; a grain boundary with a higher atomic density ratio typically exhibits a wider defect free zone compared to one with a lower ratio. These results clearly indicate that the distribution of irradiation-induced secondary defects in ferritic/martensitic steels is not uniform and is likely controlled by the sink strength, as characterized by the atomic density ratio of grain boundary planes.

Thermomechanical response and crack evolution of sandstone at elevated temperatures

Understanding the thermomechanical response of rock at high temperatures is crucial for various energy applications such as underground coal gasification and geothermal systems. The study investigated the effects of temperature, mineral composition, and grain size on crack initiation (CI) and crack damage (CD) thresholds in Jodhpur sandstones using uniaxial compressive strength with acoustic emission, Brazilian tensile strength, and thermogravimetric analysis subjected to elevated temperatures. The study revealed distinct patterns in crack initiation stress threshold ratios (CISTR) and crack damage stress threshold ratios (CDSTR) influenced by mineral composition and grain size under temperature treatments. Ferruginous quartz arenite exhibited an inverse relationship between quartz content and crack initiation/damage stress thresholds, while siliceous quartz arenite and subarkose showed a positive correlation. The established variation is attributed to the differing grain boundary strengths among the minerals. Comparative analysis of crack thresholds with the minerals, excluding quartz and feldspar, revealed complex relationships with clay and other minerals. Finer-grained sandstones showed direct proportionality in CI and CISTR with clay content, while coarser sandstones exhibited an inverse relationship. Additionally, the study highlighted differential trends in toughness parameters and CISTR, emphasizing the role of grain size and heat-treatment conditions in governing stress thresholds. Significant chemical changes, including quartz phase shifts and kaolinite/muscovite dehydroxylation, occurred in sandstones at 500–600°C. The presence of kaolinite/hematite in ferruginous quartz arenite caused the increased mass loss in pure O2 due to kaolinite breakdown, while siliceous quartz arenite exhibited a greater mass loss in standard conditions. The findings suggest that quartz content does not consistently enhance rock strength under heat treatment, particularly in the presence of significant clay minerals, leading to an inverse quartz-rock strength relationship in ferruginous quartz arenites. The study provides valuable insights into the thermomechanical behavior of sandstones, which is crucial for assessing rock stability and durability in energy applications.

Decoupling the roles of grain boundary strength and grain size hidden in grain-level electro-chemo-mechanical failure of solid-state electrolyte

Garnet lithium lanthanum zirconium oxide (Li7La3Zr2O12, LLZO) is a benchmark solid-state electrolyte material receiving considerable attention owing to its high conductivity and chemical stability against Li metal. Although its electro-chemo-mechanical failure mechanisms have been much investigated, the equivocal roles of grain boundary strength and grain size of LLZO remain under-explored, hindering further performance improvements. Here we decoupled the effects of grain size and grain boundary strength of polycrystalline LLZO via the combination of electrochemical kinetics and the cohesive zone model. We discovered that the disintegration of LLZO is initiated by the accumulation of local displacements, which strongly relates to the changes in both grain size and grain boundary strength. However, variations in grain boundary strength affect the diffusion and propagation pathways of damage, while the failure of LLZO is determined by the grain size. Large LLZO grains facilitate transgranular damage under low grain boundary strength, which can alter local chemo-mechanics within the bulk of LLZO, leading to more extensive damage propagation. The results showcase the structure optimization pathways by preferentially controlling the growth of lithium dendrites at grain boundaries and their penetration in garnet-type SSE.

Effect of alloying element segregation on theoretical strength and structural low-energy transition of Ni grain boundaries: A first-principles computational tensile test study

Enhancing the stability and strength of nanocrystalline metals through the manipulation of grain boundary (GB) chemistry and structure is crucial for their engineering applications. In this study, first-principle computational tensile tests on Ni Σ5 [001] (210) GBs were conducted with considering Poisson's ratio and strengthening effect of alloying elements B, W, Zr, Ta, B-W and Zr-Ta segregation. The results indicate that the Zr-Ta co-segregated GB shows a remarkable increase in theoretical tensile strength by 195 % compared to the clean GB under small strain conditions. As tensile strain increases, both clean and segregated GBs undergo a low-energy structural transition from the Σ5 [001] (210) to the more stable Σ11 [110] (113). This work presents a promising approach for enhancing the stability of Ni nanograined materials through tensile deformation and GB segregation.

PECULIARITIES OF CRACK FORMATION IN HETEROPHASE INCLUSIONS OF THE “EUTECTICS OF INCLUSION − MATRIX” TYPE

Purpose. The goal of the work was to study the peculiarities of crack nucleation in heterophase inclusions of the “eutectic inclusion − matrix” type during steel deformation. Methods. The research was carried out after deformation of samples from steels 08Yu, 12GS, 08kp, 09G2S, NB-57, 08GSYUTF in the temperature range of 20…1 200 °C with the speed of movement of grips 1 680 mm/min. The research methods were used − petrography, micro-X-ray spectral analysis (Cameca MS-4, Nanolab-7), optical microscopy (Neophot-21). Results. It is established that the variety of phases that make up heterophase inclusions of the type “eutectic of inclusion − matrix” leads to their different behavior under conditions of plastic deformation. It is shown that the nucleation of brittle or viscous microcracks occurs along the internal interfacial boundaries between the metal matrix and the second phase of the eutectic. It is determined that the nature of cracks is determined by the level of plasticity of the inclusion phases and the deformation temperature. It is shown that the critical degrees of deformation of the samples, at the achievement of which there were noticeable microcracks along the internal interfacial boundaries, depend on the temperature and nature of the phases of inclusions “eutectic of inclusion − matrix”. It is established that the values of critical degrees of deformation determine the level of cohesive strength of the internal interfacial boundaries in heterophase inclusions “inclusion − matrix eutectic”. Scientific novelty. Peculiarities of microcracking nucleation in heterophase inclusions of the “inclusion − matrix eutectic” type have been established. It is shown that the nature of microcracks formed along the interfacial boundaries depends on the temperature, level of plasticity and conditions of combination of brittle and plastic phases in inclusions of the “eutectic of inclusion − matrix” type, as well as on the deformation temperature. It is shown that the critical degrees of deformation of steels, when microcracks occurred along the inner interfacial boundaries, determine the cohesive strength of these boundaries and depend on the temperature and nature of the phases of inclusions such as “inclusion − matrix eutectic”. Practical significance. The use of the results obtained will make it possible to develop technologies for producing steels with regulated types of heterophase nonmetallic inclusions, which will significantly increase their technological and operational characteristics, as well as prevent the formation of various kinds of defects during the processing of steels by pressure and the operation of products.

Influence of Chemical Composition of Abrasive Materials and Strength of Interlayer Boundaries on Impact and Abrasive Wear Resistance of Layered Composite Materials

Influence of Chemical Composition of Abrasive Materials and Strength of Interlayer Boundaries on Impact and Abrasive Wear Resistance of Layered Composite Materials

Syntactic pausing? Re-examining the associations

Abstract In this study, we look at the distribution of silent pauses within existing multi-language corpora to see whether their location and duration correlate with clause boundaries. Our study is based on data of seven languages from Multi-CAST. We supplemented the original clause boundary annotations with information about silent pauses in order to investigate the alignment of clause boundaries and pausing. We find a gradient association between clause boundary strength and the probability of a pause and a two-way distinction for pause duration within clauses and at clause boundaries.

Creation of a nickel composite using surface structuring of the reinforcing phase with titanium carbide nanostructures to improve strength properties

Abstract The development of metal matrix composite (MMC) materials is one of the demanded areas of research in materials science. In line with this trend, there is an increasing interest in nickel-based MMC materials, which have already become classic in science and technology. This is due to the high demand for Ni-based materials with high strength characteristics, high hardness, and increased heat resistance. In this research, we proposed an approach to obtain a MMC material using the surface structuring process, ALD (Atomic Layer Deposition) and powder metallurgy method. The developed approach provides a composite with TiC nanostructures (1-5 nm) uniformly distributed throughout the Ni matrix. The absence of interphase boundaries between the Ni matrix particles and carbide nanostructures made it possible to minimize the internal porosity of the sample. This is due to the strength of the interphase boundaries between the matrix and the reinforcing phase in the composite and to the solidity of the structure. As a result, the created material effectively resists plastic deformation and stress. This allows not only to enhance the strength properties of the composite, but also to maintain the MMC plasticity, which increases its processing ability.

Comparation of non-proportional hardening behavior and microscopic mechanism for CP-Ti under strain-controlled and stress-controlled multiaxial low cycle fatigue

Proportional and non-proportional multiaxial low cycle fatigue tests were performed on commercial pure titanium (CP-Ti), employing both strain-controlled and stress-controlled modes. CP-Ti exhibits a four-stage characteristic under higher applied strain amplitude. For other cases and under stress-controlled mode, the initial hardening dissipated, giving way to a typical three-stage cyclic softening characteristics. Two failure modes, fatigue failure and ratcheting failure, occur depending on the applied stress amplitude. CP-Ti exhibits obvious asymmetric strain response under symmetric stress-controlled mode depending on the loading level. CP-Ti demonstrates non-proportional hardening under both strain-controlled mode and stress-controlled mode with different microscopic mechanisms. The additional hardening due to non-proportional loading results in an increase in the axial response stress with increasing multiaxial strain ratio. Interactions between dislocations with different slip systems hinder the development of stable dislocation structures, leading to pronounced non-proportional hardening of CP-Ti under strain-controlled mode. As for stress-controlled mode, the significant growth of twin content improves the grain boundary strength, leading to the non-proportional hardening of CP-Ti.

Understanding the effect of microstructure on the failure behavior of additively manufactured Al2O3 ceramics: 3D micromechanical modeling

Additively manufactured (AM) ceramics are gaining popularity due to improved flexibility in the design of customized structures. Microstructure-based finite element (FE) models were developed to study the strain-rate-dependent failure behavior of AM Al2O3 ceramics under uniaxial compression. Upon validation with experimental data, the model was leveraged to quantify the history of intergranular and transgranular failure mechanisms across microstructures. It was revealed that the intergranular mechanism plays a key role in the material strength across strain rates. Crystallographic orientations were found to remarkably decrease the material strength due to the earlier initiation and faster growth of the intergranular mechanism. The increase in porosity was found to amplify the transgranular mechanism resulting from a higher number of pores acting as crack nucleation sites, decreasing the material strength regardless of strain rate. The model reflected the existence of a threshold for grain boundary strength, beyond which further enhancements yield marginal improvements in material strength. Additionally, the effect of grain size on the initiation and evolution of failure mechanisms was studied and the corresponding limitations of the model were discussed. The current work correlates the microstructure of the material to its macroscale response through micromechanical models, informing the design of better-performing AM Al2O3 ceramics.

Role of Grain Boundary Strength on Yielding Behavior and Uniaxial Tensile Properties in Ferritic Steels

Role of Grain Boundary Strength on Yielding Behavior and Uniaxial Tensile Properties in Ferritic Steels

Effect of temperature on dynamic strain aging and intermediate temperature embrittlement of nickel-based alloy N06625

Due to its excellent mechanical properties and good corrosion resistance at low to intermediate temperatures, nickel-based alloy N06625 has gradually become an ideal material for high-temperature gas-cooled reactor evaporators in nuclear power plants. It is currently receiving more and more attention. In this work, the tensile test of nickel-based alloy N06625 was carried out at room temperature to 900℃. The dynamic strain aging (DSA) process and microstructure evolution were studied by electron back-scatter diffraction (EBSD). The dynamic strain aging and intermediate temperature embrittlement of nickel-based alloy N06625 in the temperature range 25–900℃ were systematically studied. The results show that the stress-strain curve exhibits a serrated shape at 200–700℃, and with the increase in temperature, the serrated type changes from type A to type A+B and type C. The type A and type (A+B) serrations are related to the diffusion of interstitial carbon atoms. The interaction between substitutional elements Cr and Mo and movable dislocations causes the type C serration. As the temperature increases, high-density dislocations accumulate at the grain boundaries, and the proportion of substructural grains increases. A brittle fracture occurs at 600–800℃. The fracture mechanism may be due to the stress concentration at the grain boundary caused by the appearance of micropore, which weakens the grain boundary's strength and promotes the grain boundary's early failure. The continuous increase of strain makes the micropore fuse and grow to form a crack source.

Enhanced densification and mechanical properties of Ta-Hf-C solid solution ceramics by WC doping

In this paper, we propose an effective method for doping WC into Ta-Hf-C ceramics to significantly enhance their densification and mechanical properties. An increasing WC doping amount from 0 to 20 at.%, enhances the densification of Ta-Hf-C ceramics from 92.4 % to 99.1 %. This is mainly due to the fact that the doping of WC effectively removes the harmful oxygen impurities from the ceramics, thereby increasing their sintering activity. Furthermore, the doping of WC plays an active role in the mechanical properties of the ceramics. The Ta-Hf-C doped with 15 at.% WC has the highest value of 36.41 GPa for nano-hardness due to the solid solution strengthening mechanism, while the highest Vickers hardness (38.75 GPa) and fracture toughness (3.76 MPa m1/2) appear in Ta-Hf-C doped with 20 at.% WC. The main toughness mechanism is W segregation at the grain boundary, enhancing grain boundary strength.

Investigating the Effects of CoMoCrSi Powder Composition and Particle Size, and Annealing Heat Treatment on Microstructure and Mechanical and Tribological Performance of HVOF Sprayed Coatings

AbstractAn investigation was conducted to analyze the mechanical properties, wear behavior, and microstructure of coatings formed by high-velocity oxygen fuel spraying of CoMoCrSi powders. The effects of varying Cr concentration and particle sizes before and after heat treatment at 900 °C for 4 h were studied comparatively. The increase in Cr and Mo elements in the expanse of Co increased the structure's hardness before and after the heat treatment. As this increase was 10% in as-sprayed conditions, annealing raised the increase to 30%. Splat boundaries were the most vulnerable constituents against forces, creating a significant disadvantage in terms of structural integrity and affecting the overall performance. After annealing, the boundary strengths experienced a remarkable four-fold increase and cracks and fractures reduced significantly. The susceptibility of splat boundaries had a detrimental effect on room temperature wear behavior, and increased boundary densities led to a marked reduction in wear performance. Heat treatment induced improvements significantly increased the room temperature wear performance. At elevated temperature, the formation of oxide layers composed of CoMoO4, Co3O4, MoO3, and Cr2O3 overcame the weaknesses of the as-sprayed coating, reducing both the friction coefficient and wear losses. A reduced Co ratio led to the formation of an oxide blend with a higher concentration of Mo and Cr oxides on the surface, further improving the coating's wear behavior. Graphical Abstract

The relationship between event boundary strength and pattern shifts across the cortical hierarchy during naturalistic movie-viewing.

Our continuous experience is spontaneously segmented by the brain into discrete events. However, the beginning of a new event (an event boundary) is not always sharply identifiable: phenomenologically, event boundaries vary in salience. How are the response profiles of cortical areas at event boundaries modulated by boundary strength during complex, naturalistic movie-viewing? Do cortical responses scale in a graded manner with boundary strength, or do they merely detect boundaries in a binary fashion? We measured "cortical boundary shifts" as transient changes in multi-voxel patterns at event boundaries with different strengths (weak, moderate, and strong), determined by across-subject agreement. Cortical regions with different processing timescales were examined. In auditory areas, which have short timescales, cortical boundary shifts exhibited a clearly graded profile both in group-level and individual-level analyses. In cortical areas with long timescales, including the default mode network, boundary strength modulated pattern shift magnitude at the individual subject level. We also observed a positive relationship between boundary strength and the extent of temporal alignment of boundary shifts across different levels of the cortical hierarchy. Additionally, hippocampal activity was highest at event boundaries for which cortical boundary shifts were most aligned across hierarchical levels. Overall, we found that event boundary strength modulated cortical pattern shifts strongly in sensory areas and more weakly in higher-level areas, and that stronger boundaries were associated with greater alignment of these shifts across the cortical hierarchy.

Effects of rare-earth oxides on grain boundary strength of silicon nitride ceramics

This study investigates the grain boundary (GB) strengths for Si3N4 ceramics doped with 3 wt% RE2O3 (RE = Y, La, or Lu) and 7 wt% MgO, using microcantilever beam specimens having different misorientation angles of the two adjacent grains. The measured strengths are so high that they are comparable to the theoretical strength of the intergranular glassy film (IGF). They are also widely scattered with a Weibull modulus of 3.0. The strength depends on the type of RE2O3 and increases in order of Y<La<Lu. It is suggested that the fracture occurs from the IGF/Si3N4 interfaces rather than within the IGF, and that O anions, which reside within the IGF and do not dissolve into the β-Si3N4 crystal lattice because of the high cationic field strength, reduce the IGF/grain interface strength. The GB strength also little depends on the misorientation angles, which is discussed in relation with the IGF accommodation ability of mismatch.