Bonneted slide gates are widely used in dam bottom outlets for flow regulation. High kinetic energy flow generates turbulence, which induces vibrations in bonneted slide gates under partially open conditions. Significant vibrations can indicate problems and cause damage or expedited deterioration of the gate if left unchecked. This experimental study focuses on two aspects: turbulent flow formation due to rectangular bonneted slide gates and elimination of random fluctuating loads on the gate using a turbulence inhibitor. Five reservoir heads were combined with nine gate openings (10%–90%) to produce 45 different discharges of 12–182 l/s. The different types of the gate flow create different turbulence and random loads based on the water–air mixture and the kinetic energy of the flow. Flow analysis indicates considerable random static pressure fluctuations under the slide gate. The results show the formation of swirling secondary flows in the gate's side guide slots, and their movement and collision with the gate are the leading cause of the turbulent multiphase flow and random fluctuations in static pressure. Also, the use of turbulence inhibitors on the gate can prevent the formation of secondary flows, which results in a 98.92% reduction in the amplitude of random static pressure fluctuations and the elimination of the random fluctuating loads on the slide gate. After removing the swirling secondary flows, a stable air boundary layer was formed under the gate. Finally, the gate flow changed from a turbulent two-phase flow to a steady single-phase jet of water.