Bone Research Articles

Nanographene Oxide Promotes Angiogenesis by Regulating Osteoclast Differentiation and Platelet-Derived Growth Factor Secretion.

An imbalanced system of angiogenesis-osteoblasts-osteoclasts is regarded as the main factor in bone remodeling dysfunction diseases or osseointegration loss. Osteoclast precursors are the key cells that accelerate bone-specific angiogenesis and maintain normal osteoblast and osteoclast function. Graphene oxide is an effective scaffold surface modification agent with broad application prospects in bone tissue engineering. However, the effect of graphene oxide on the interaction between osteoclasts and angiogenesis has not yet been elucidated. In this study, a rat calvarial defect model was established and treated with an electrochemically derived nanographene oxide (ENGO) hydrogel. Higher angiogenesis and platelet-derived growth factor (PDGF) B in preosteoclasts were observed in the ENGO group compared with that in the control group. Moreover, in vitro experiments demonstrate the efficacy of ENGO in substantially reducing the expression of the receptor activator of nuclear factor-kappaB ligand (RANKL)-induced osteoclast-associated markers and inhibiting bone resorption activity. Additionally, ENGO enhances the secretion of the osteoclast-derived coupling factor PDGF-BB and promotes angiogenesis. Our investigation revealed the crucial role of isocitrate dehydrogenase 1 (IDH1) in the ENGO-mediated regulation of osteoclast differentiation and PDGF-BB secretion. The decreased expression of IDH1 reduces the level of histone lysine demethylase 7A (KDM7A) and subsequently increases the H3K9me2 level in the cathepsin K promoter region. In summary, we found that ENGO promotes angiogenesis by inhibiting the maturity of RANKL-induced osteoclasts and enhancing PDGF-BB secretion. These results indicate that ENGO holds promise for the application in fostering osteoclast-endothelial cell crosstalk, providing an effective strategy for treating bone resorption and osteoclast-related bone loss diseases.

Development of a Biodegradable PLGA Carrier to Provide Wnt Agonists and Antibiotics to Meet the Requirements for Patients with Bone Infections.

Antibiotic beads can be used to treat surgical infections. In this study, polylactide-polyglycolide (PLGA) was mixed with vancomycin, the osteogenic enhancer lithium chloride (LiCl), and hot compression to form PLGA-vancomycin-LiCl delivery beads to treat bone infection. An elution method was used to characterize in vitro release characteristics of vancomycin and Li over a 42-day period. The release profiles lasted for more than 42 days for vancomycin and 28 days for Li. The concentration of vancomycin in each sample was well above the breakpoint sensitivity. Lithium cotreatment enhanced the bactericidal effect of vancomycin. Released Li and vancomycin increased the mRNA or protein expressions of osteogenic markers of mesenchymal stem cells (MSCs). In vivo, the PLGA delivery systems were implanted into the distal femoral cavities of rabbits, and the cavity fluid content was aspirated and analyzed at each time point. The released Li and vancomycin lasted more than 6 weeks, and the vancomycin concentrations were much greater than the breakpoint sensitivity. Four rabbits in each group were sacrificed at 8 weeks for histological observation. More mature bone tissue was observed in the Li treatment group. This study provides a PLGA drug delivery system to meet the requirements of patients with bone infections.

Complications of chest wall around malignant tumors: differences based on reconstruction strategy

BackgroundMalignant chest wall tumors need to be excised with wide resection to ensure tumor free margins, and the reconstruction method should be selected according to the depth and dimensions of the tumor. Vascularized tissue is needed to cover the superficial soft tissue defect or bone tissue defect. This study evaluated differences in complications according to reconstruction strategy.MethodsForty-five patients with 52 operations for resection of malignant tumors in the chest wall were retrospectively reviewed. Patients were categorized as having superficial tumors, comprising Group A with simple closure for small soft tissue defects and Group B with flap coverage for wide soft tissue defects, or deep tumors, comprising Group C with full-thickness resection with or without mesh reconstruction and Group D with full-thickness resection covered by flap with or without polymethyl methacrylate. Complications were evaluated for the 52 operations based on reconstruction strategy then risk factors for surgical and respiratory complications were elucidated.ResultsTotal local recurrence-free survival rates in 45 patients who received first operation were 83.9% at 5 years and 70.6% at 10 years. The surgical complication rate was 11.5% (6/52), occurring only in cases with deep tumors, predominantly from Group D. Operations needing chest wall reconstruction (p = 0.0016) and flap transfer (p = 0.0112) were significantly associated with the incidence of complications. Operations involving complications showed significantly larger tumors, wider areas of bony chest wall resection and greater volumes of bleeding (p < 0.005). Flap transfer was the only significant predictor identified from multivariate analysis (OR: 10.8, 95%CI: 1.05–111; p = 0.0456). The respiratory complication rate was 13.5% (7/52), occurring with superficial and deep tumors, particularly Groups B and D. Flap transfer was significantly associated with the incidence of respiratory complications (p < 0.0005). Cases in the group with respiratory complications were older, more frequently had a history of smoking, had lower FEV1.0% and had a wider area of skin resected compared to cases in the group without respiratory complications (p < 0.05). Preoperative FEV1.0% was the only significant predictor identified from multivariate analysis (OR: 0.814, 95%CI: 0.693–0.957; p = 0.0126).ConclusionsSurgical complications were more frequent in Group D and after operations involving flap transfer. Severe preoperative FEV1.0% was associated with respiratory complications even in cases of superficial tumors with flap transfer.

Penicillin concentrations in bone and subcutaneous tissue: A porcine microdialysis study comparing oral and intravenous treatment.

Penicillin is available in both an oral (penicillin V) and intravenous formulation (penicillin G), theoretically allowing for a safe transition between the two. However, the use of oral penicillin remains a topic of debate due to low and variable bioavailability. This study aimed to assess the time for which the free penicillin concentration exceeded targeted minimum inhibitory concentrations for Staphylococcus aureus and Streptococcus species (0.125, 0.25, and 0.5 mg/L) in cancellous bone and subcutaneous tissue after intravenous penicillin and oral penicillin administration. 12 female pigs (68-75 kg) were assigned, according to local standard clinical regimes, to either intravenous penicillin (1.2 g) or oral penicillin (0.8 g) treatment every 6 h over an 18 h period. Microdialysis catheters were placed for sampling in tibial cancellous bone and adjacent subcutaneous tissue. Data was dynamic/continually collected in the first dosing interval (0-6 h), simulating a prophylactic situation, and the third dosing interval (12-18 h), simulating a therapeutic setting. Plasma samples were collected for reference. For all investigated targets, intravenous treatment resulted in a longer mean time above relevant minimum inhibitory concentrations in cancellous bone during the first dosing interval, and in both cancellous bone and subcutaneous tissue during the third dosing interval compared to oral treatment. With clinically relevant dosing, intravenous penicillin provides superior exposure compared to oral penicillin in both a prophylactic and therapeutic setting.

3D Printed PLA Porous Scaffolds with Engineered Cell Size and Porosity Promote the Effectiveness of the Kelvin Model for Bone Tissue Engineering

AbstractIn this study, the aim is to investigate the effect of engineering the cell size and porosity of 3D‐printed poly lactic acid (PLA) porous scaffolds from the Kelvin model for bone tissue engineering applications. The Kelvin model is used as a bone tissue scaffold with different cell sizes and porosities. PLA, as a biodegradable and biocompatible polymer, is used to fabricate these scaffolds using the FDM technique. A compression test is used to evaluate the mechanical properties of scaffolds. The MTT assay has been used to investigate cell viability. For osteogenic differentiation studies, ALP activity and ARS assays are used. Increasing the porosity reduces the mechanical properties of the scaffold. While increasing the cell size at constant porosity increases the Young's modulus and yield stress in the samples, it is also observed that, in high porosities, the increase in cell size weakens the mechanical properties. Also, Kelvin model scaffolds help the proliferation and osteogenic differentiation of cells and have no toxic effect. It is demonstrated that this approach promotes the effectiveness of the Kelvin architecture for bone tissue engineering. As a result, designing the most suitable model based on cell size and porosity for the treatment process in the targeted area could be promising.

Chronic osteoarthritis caused by Propionibacterium australiense infection in a captive sand gazelle.

Osteoarthritis is a common cause of morbidity and mortality in geriatric gazelles. Propionibacterium australiense has been reported as a cause of systemic granulomas in cattle, but there are no descriptions of this bacteria infecting other species nor causing osteoarthritis, to our knowledge. An 8-y-old, castrated male, sand gazelle (Gazella leptoceros leptoceros) was managed for chronic, intermittent, progressive osteoarthritis of the right tarsus. Serial biopsies revealed pyogranulomatous dermatitis with intralesional bacteria. Serial diagnostic imaging identified osseous and soft tissue proliferation with draining tracts. Treatments over 1 y included broad-spectrum antibiotics, anti-inflammatories, joint debridement, and infusion with platelet-rich plasma and stem cells. Despite therapy, lameness persisted, azotemia developed, and subsequently, the animal was euthanized. On postmortem examination, the periarticular tissue of the right tarsus was markedly expanded by pyogranulomas and fibrosis. Histologically, the synovium, joint capsule, and overlying soft tissues were markedly expanded by pyogranulomas and numerous gram-positive and acid-fast-negative filamentous bacteria surrounded by Splendore-Hoeppli material. Within the joint, there was regionally extensive cartilage ulceration, osteonecrosis, osteolysis, and pannus formation. PCR assay of affected formalin-fixed, paraffin-embedded tissue amplified segments of 16S rRNA and β subunit of bacterial RNA polymerase (rpoB) genes with 99.7% and 95.6% identity to P. australiense. This bacterium should be considered a differential for chronic pyogranulomatous osteoarthritis in gazelles.

Morphological, mechanical and biological assessment of PCL/pristine graphene scaffolds for bone regeneration

Scaffolds are physical substrates for cell attachment, proliferation, and differentiation, ultimately leading to the regeneration of tissues. They must be designed according to specific biomechanical requirements such as mechanical properties, surface characteristics, biodegradability, biocompatibility, and porosity. The optimal design of a scaffold for a specific tissue strongly depends on both materials and manufacturing processes. Polymeric scaffolds reinforced with electro-active particles could play a key role in tissue engineering by modulating cell proliferation and differentiation. This paper investigates the use of an extrusion additive manufacturing system to produce PCL/pristine graphene scaffolds for bone tissue applications. PCL/pristine graphene blends were prepared using a melt blending process. Scaffolds with regular and reproducible architecture were produced with different concentrations of pristine graphene. Scaffolds were evaluated from morphological, mechanical, and biological view. The results suggest that the addition of pristine graphene improves the mechanical performance of the scaffolds, reduces the hydrophobicity, and improves cell viability and proliferation.

Preventing bacterial adhesion on scaffolds for bone tissue engineering

Bone implant infection constitutes a major sanitary concern which is associated to high morbidity and health costs. This manuscript focused on overviewing the main research efforts committed up to date to develop innovative alternatives to conventional treatments, such as those with antibiotics. These strategies mainly rely on chemical modifications of the surface of biomaterials, such as providing it of zwitterionic nature, and tailoring the nanostructure surface of metal implants. These surface modifications have successfully allowed inhibition of bacterial adhesion, which is the first step to implant infection, and preventing long-term biofilm formation compared to pristine materials. These strategies could be easily applied to provide three-dimensional (3D) scaffolds based on bioceramics and metals, of which its manufacture using rapid prototyping techniques was reviewed. This opens the gates for the design and development of advanced 3D scaffolds for bone tissue engineering to prevent bone implant infections.

Freezing does not influence the microarchitectural parameters of the microstructure of the freshly harvested femoral head bone.

The femoral head is one of the most commonly used bones for allografts and biomechanical studies. However, there are few reports on the trabecular bone microarchitectural parameters of freshly harvested trabecular bones. To our knowledge, this is the first study to characterize the microstructure of femoral heads tested immediately after surgery and compare it with the microstructure obtained with conventional freezing. This study aims to investigate whether freezing at -80°C for 6weeks affects the trabecular microstructure of freshly harvested bone tissue. This study was divided into two groups: one with freshly harvested human femoral heads and the other withthe same human femoral heads frozen at -80°C for 6weeks. Each femoral head was scanned using an X-ray microcomputed tomography scanner (µCT) to obtain the microarchitectural parameters, including the bone volume fraction (BV/TV), the mean trabecular thickness (Tb.th), the trabecular separation (Tb.sp), the degree of anisotropy (DA), and the connectivity density (Conn.D). There was no statistically significant difference between the fresh and the frozen groups for any of the parameters measured. This study shows that freezing at -80°C for 6weeks does not alter bone microstructure compared with freshly harvested femoral heads tested immediately after surgery.

Recent development of chitosan-based biomaterials for treatment of osteomyelitis

Abstract Osteomyelitis is a complex infectious disease caused by bacterial infection, which has always been a difficult problem for clinical orthopedic surgeons. Although the traditional methods are effective in treating osteomyelitis, the heavy use of antibiotics and surgical treatment cause serious side effects and lead to bone loss and healing difficulties after surgery. Chitosan (CS), a natural polymer material, is a deacetylated derivative of chitin, which has good biodegradability, antibacterial, and osteogenic properties, and has been widely used in the treatment of osteomyelitis. In this review, the recent research progress in the application of CS based composites such as micro-nano drug delivery carriers, hydrogels, coating materials, and bone tissue engineering scaffolds for the treatment of osteomyelitis is summarized, in order to provide certain experimental and theoretical support for the development of CS based composites.

A case of high-grade non-intestinal paranasal sinus adenocarcinoma primary in the maxillary sinus: targeted therapy after postoperative immunocombination with chemotherapy

BackgroundHigh-grade non-intestinal-type sinonasal adenocarcinoma (non-ITAC) is a rare and aggressive form of adenocarcinoma with poor prognosis. The current standard treatment approach involves surgery combined with radiation therapy. However, there is a need for exploring additional treatment modalities to improve patient outcomes.Case presentationWe present a case of a 65-year-old male patient who presented with pain in the right maxillary sinus and was diagnosed with high-grade non-ITAC following surgery. Postoperative pathology revealed tumor invasion into bone tissue and vascular invasion, necessitating further treatment. The patient underwent radiation therapy, followed by immunotherapy with carilizumab combined with chemotherapy. During the maintenance immunotherapy period, tumor progression was observed, and genetic testing identified EGFR and TP53 mutations. Consequently, the patient was treated with gefitinib, a targeted therapy drug. Notably, the patient’s lung metastases showed a gradual reduction in size, indicating a favorable treatment response. The patient is currently undergoing oral treatment with gefitinib.ConclusionsThis case report highlights the potential benefit of combining immunotherapy and targeted therapy in the treatment of high-grade non-ITAC. Despite the rarity of this cancer type, this approach may offer an alternative treatment strategy for patients with this aggressive disease. We hope that this case can contribute to a deeper understanding of high-grade non-ITAC and promote the application of immunotherapy and targeted therapy in improving survival rates for patients with this condition.

Effect of Swimming Training on Bone Tissue in Humans

Introduction and purpose: The skeletal system performs many important functions in the human body. It primarily bears the heavy loads associated with movement, protects internal organs, and participates in the regulation of mineral homeostasis. Through continuous processes of bone remodeling and modeling, optimal levels of calcium and phosphorus in the serum are achieved. The balanced removal of old bone tissue by osteoclasts and the formation of new bone by osteoblasts maintain the mechanical properties necessary for the proper functioning of the musculoskeletal system. Bone modeling has been shown to be activated in response to mechanical loading from physical activity. Conversely, the absence of significant loading (as in space travel, i.e., microgravity conditions) leads to increased bone resorption. Osteocytes, as the most numerous group of cells in the skeletal system, are mechanosensitive and are thought to respond to stimuli such as fluid flow, mechanical deformations, and hydrostatic pressure. In response, they regulate the work of osteoclasts and osteoblasts, translating into the regulation of processes occurring in the bone matrix.[1] It is suspected that the type, intensity, and nature of physical exercises can significantly influence these processes. The aim of this work is to gather information on the impact of swimming training (an example of physical exercise in conditions of partial gravity reduction) on the human skeletal system.

Ultrasensitive optical detection of strontium ions by specific nanosensor with ultrahigh binding affinity

The release and escape of radioactive materials has posed tremendous threats to the global environment. Among various radioactive elements, 90Sr has attracted growing attention due to its long half-life and its tendency to accumulate in bone tissue. Nonetheless, the concentration of 90Sr in radioactive waste is exceedingly low, far below the detection limits of currently available strontium-targeting chemical sensors. Herein, we propose an optical nanosensor (Sr2+-nanosensor) that exhibits an ultra-low detection limit of 0.5 nM, surpassing the 90Sr in the treated radioactive water from the Fukushima. The sensor offers wide sensing range of eight orders of magnitude, rapid response of less than 10 s, and high selectivity against 31 common ions. These excellent performances are attributed to a specific ligand (Sr2+-ligand) for Sr2+ recognition. The Sr2+ is found to be bound by six oxygen atoms from the Sr2+-ligand with a stability constant at least two orders higher than that of other traditional ligands. This study offers invaluable insights for the design of Sr2+-sensing methodologies as well as a technique for detecting trace amounts of environmental radioactive pollution.

Effect of genetically engineered drugs in aseptic necrosis of the femoral head in rats

Bone tissue is a dynamic structure with a metabolic function. The maintenance of bone homeostasis is carried out due to the continuous process of its renewal, remodeling. At the same time, a number of pathological processes, such as ischemic catastrophe, can lead to a violation of the balance of maintaining the constancy of the bone structure. One of these diseases is aseptic necrosis of the femoral head. The presented study analyzes the dynamics of expression of genes involved in maintaining bone tissue homeostasis, changes in the histological picture during the development of aseptic necrosis of the femoral head in laboratory rats that did not receive genetically engineered drugs and against the background of the use of inhibitors of biological action IL-6, TNF-α. After induction of aseptic necrosis in the proximal epiphysis of the femur, the histological picture in animals of different groups was not the same. More preserved bone architectonics and a larger volume of bone plates were recorded in rats receiving genetically engineered drugs compared to animals without the introduction of biological agents. The latter also had the most vivid picture of osteodestruction with increased expression of proinflammatory cytokine genes. In animals, against the background of the use of drugs of inhibitors of the biological action of IL-6, TNF-α, from the second week after induction of aseptic necrosis of the mRNA, the profile of the spongiose bone of the proximal epiphysis of the femur tended to increase the expression of osteoreparation genes. At the same time, the greatest inhibition of osteoclastogenesis gene expression was obtained in rats after injection of a monoclonal antibody to the IL-6 receptor.

3D-printed HA15-loaded β-Tricalcium Phosphate/Poly (Lactic-co-glycolic acid) Bone Tissue Scaffold Promotes Bone Regeneration in Rabbit Radial Defects.

In this study, a β-tricalcium phosphate (β-TCP)/poly (lactic-co-glycolic acid) (PLGA) bone tissue scaffold was loaded with osteogenesis-promoting drug HA15 and constructed by three-dimensional (3D) printing technology. This drug delivery system with favorable biomechanical properties, bone conduction function, and local release of osteogenic drugs could provide the basis for the treatment of bone defects. The biomechanical properties of the scaffold were investigated by compressive testing, showing comparable biomechanical properties with cancellous bone tissue. Furthermore, the microstructure, pore morphology, and condition were studied. Moreover, the drug release concentration, the effect of anti-tuberculosis drugs in vitro and in rabbit radial defects, and the ability of the scaffold to repair the defects were studied. The results show that the scaffold loaded with HA15 can promote cell differentiation into osteoblasts in vitro, targeting HSPA5. The micro-computed tomography scans showed that after 12 weeks of scaffold implantation, the defect of the rabbit radius was repaired and the peripheral blood vessels were regenerated. Thus, HA15 can target HSPA5 to inhibit endoplasmic reticulum stress which finally leads to promotion of osteogenesis, bone regeneration, and angiogenesis in the rabbit bone defect model. Overall, the 3D-printed β-TCP/PLGA-loaded HA15 bone tissue scaffold can be used as a substitute material for the treatment of bone defects because of its unique biomechanical properties and bone conductivity.

Mesenchymal chondrosarcoma of the foot salvaged by sensate chimeric anterolateral thigh free flap

Mesenchymal chondrosarcoma is a rare, aggressive sarcoma of bone or soft tissue with a high risk of hematogenous spread, leading to significant morbidity and mortality. Surgical resection is the standard treatment for localized cases. Addressing the limited data, we present a case of localized mesenchymal chondrosarcoma in the foot, where upfront surgery risked sacrificing the medial longitudinal arch crucial for weight-bearing. The patient received neoadjuvant chemotherapy and underwent limb salvage surgery using a sensate chimeric anterolateral thigh flap to preserve functionality.

A multi-scale porous scaffold fabricated by a combined additive manufacturing and chemical etching process for bone tissue engineering

It is critical to develop a fabrication technology for precisely controlling an interconnected porous structure of scaffolds to mimic the native bone microenvironment. In this work, a novel combined process of additive manufacturing (AM) and chemical etching was developed to fabricate graphene oxide/poly(L-lactic acid) (GO/PLLA) scaffolds with multiscale porous structure. Specially, AM was used to fabricate an interconnected porous network with pore sizes of hundreds of microns. And the chemical etching in sodium hydroxide solution constructed pores with several microns or even smaller on scaffolds surface. The degradation period of the scaffolds was adjustable via controlling the size and quantity of pores. Moreover, the scaffolds exhibited surprising bioactivity after chemical etching, which was ascribed to the formed polar groups on scaffolds surfaces. Furthermore, GO improved the mechanical strength of the scaffolds.

Numerical assessment of induced electric fields in a worker’s hand with commonly used metallic implants under exposure to low frequency magnetic fields

The European Union’s Workers’ Directive 2013/35/EU on the minimum health and safety requirements regarding the exposure of workers to electromagnetic fields specifies action levels (ALs) for external electric and magnetic fields, which should protect against induced tissue-internal electric field strength E i above the exposure limit values, the latter being defined in order to prevent tissue stimulation at low frequencies. However, although 2013/35/EU explicitly calls for the protection of ‘workers at particular risk’ (including workers with metallic implants), the AL specified in the Directive have been derived under the assumption that there are no metallic parts present inside the body. Therefore, in the present work, we analysed the situation of a worker’s hand and forearm bearing metallic implants (Herbert screw and volar radius plate) used for osteosynthesis after the most common bone fractures of the hand/forearm, exposed to low frequency magnetic fields. The uniform exposure of the whole hand and forearm as well as the exposure to a specific and widely used device, a deactivator for single-use labels of acousto-magnetic electronic article surveillance systems, were considered based on numerical computations using a high-resolution anatomical hand and forearm model. The results obtained indicated that the maximum induced electric field strength averaged in a volume of 2 mm × 2 mm × 2 mm cube was higher in the presence of the metallic implants by a factor of up to 4.2 for bone tissue and 2.3 for soft tissue compared with the case without an implant. Hence, it is obvious that the local induced electric field strengths may be substantially increased by the implants. The extent of this increase, however, is highly dependent on the implant’s position inside the body, the implant’s geometry, and the field distribution and orientation with respect to the anatomical structure and the implant.

Bioactivity and corrosion analysis of thermally sprayed hydroxyapatite based coatings

Metallic biomaterials have been used to repair and replace human body parts because of their excellent biocompatibility, strong corrosion resistance, and high mechanical properties. A ceramic biomaterial that is highly suitable for coating on metallic biomaterials is hydroxyapatite. This is because it is biocompatible with synthetic and natural bone tissue. There has been a growing interest in HAp-based coatings using thermal spray techniques to enhance the crystallinity and adhesion quality and produce a dense coating of metallic biomaterials. Thermally sprayed coating material has been studied and reviewed in detail in the bioactivity analysis and electro-corrosion analysis. Furthermore, the bioactivity of HAp coatings is determined by their ability to promote bone formation and osseointegration and a valuable understanding of the mechanisms and current advancements in bioactivity. Additionally, the corrosion behaviour of thermally sprayed HAp coatings under simulated conditions has been reviewed.

Synthesis and characterization of injectable thermosensitive hydrogel based on Pluronic-grafted silk fibroin copolymer containing hydroxyapatite nanoparticles as potential for bone tissue engineering

Injectable hydrogels are promising for bone tissue engineering due to their minimally invasive application and adaptability to irregular defects. This study presents the development of pluronic grafted silk fibroin (PF-127-g-SF), a temperature-sensitive graft copolymer synthesized from SF and modified PF-127 via a carbodiimide coupling reaction. The PF-127-g-SF copolymer exhibited a higher sol-gel transition temperature (34 °C at 16 % w/v) compared to PF-127 (23 °C), making it suitable for injectable applications. It also showed improved flexibility and strength, with a yielding point increase from <10 % to nearly 30 %. Unlike PF-127 gel, which degrades within 72 h in aqueous media, the PF-127-g-SF copolymer maintained a stable gel structure for over two weeks due to its robust crosslinked hydrogel network. Incorporating hydroxyapatite nanoparticles (n-HA) into the hydrogel reduced pore size and decreased swelling and degradation rates, extending structural stability to four weeks. Increasing n-HA concentration from 0 % to 20 % reduced porosity from 80 % to 66 %. Rheological studies indicated that n-HA enhanced the scaffold's strength and mechanical properties without altering gelation temperature. Cellular studies with MG-63 cells showed that n-HA concentration influenced cell viability and mineralization, highlighting the scaffold's potential in bone tissue engineering.