Bone Research Articles

Rapid fabrication of biomimetic PLGA microsphere incorporated with natural porcine dermal aECM for bone regeneration

Abstract Bioactive microspheres coated with acellular matrix (aECM) have received extensive attention in bone tissue engineering. In this work, biomimetic microspheres with different aECM ratios, uniform size and controllable size were prepared easily by blending natural porcine dermal aECM and poly (lactic-co-glycolic acid) (PLGA) using electrohydrodynamic spraying and solidification actuated by solvent extraction (ESASE) method. In this work, the appropriate polymer concentration and preparation voltage were investigated, and the surface morphology of the microspheres were observed by scanning electron microscope. Sirius red was used to visualize aECM exposure on the surface of the microspheres. The in vitro and in vivo experiments was carried out to evaluate the bioactivity and osteogenic properties of the microspheres. The results showed that the morphology and size of PLGA microspheres had little influence on the aECM blending. In vitro experiments showed that the higher the content of aECM, the better the cell adhesion performance. In vivo, rat calvarial defect models were observed and characterized at 4 and 8 weeks postoperatively, and the values of BV/TV of 50aECM/PLGA were 47.57 ± 1.14% and 72.92 ± 2.19%, respectively. The results showed that the skull healing effect was better in aECM-containing microspheres. In conclusion, aECM/PLGA composite microspheres can increase cell adhesion performance through the addition of aECM. Moreover, in vivo experiments have proved that aECM/PLGA microspheres is beneficial to bone repair, which means the aECM/PLGA microspheres is a promising bone tissue engineering material.

Autophagy Regulates Age-Related Jawbone Loss via LepR+ Stromal Cells

Bone aging and decreased autophagic activity are related but poorly explored in the jawbone. This study aimed to characterize the aging jawbones and jawbone-derived stromal cells (JBSCs) and determine the role of autophagy in jawbone mass decline. We observed that the jawbones of older individuals and mice exhibited similar age-related bone loss. Furthermore, leptin receptor (LepR)–lineage cells served as the primary source for in vitro cultured and expanded JBSCs, referred to as LepR-Cre+/JBSCs. RNA-sequencing data from the jawbones and LepR-Cre+/JBSCs showed the upregulated expression of the phosphoinositide 3-kinase (PI3K)/protein kinase B (AKT)/mammalian target of rapamycin (mTOR) pathway during aging. Through single-cell transcriptomics, we identified a decrease in the proportion of osteogenic lineage cells and the activation of the PI3K/AKT pathway in LepR-lineage cells in aging bone tissues. Reduced basal autophagic activity, diminished autophagic flux, and decreased osteogenesis occurred in the jawbones and LepR-Cre+/JBSCs from older mice (O-mice; O-JBSCs). Pharmacologic and constitutive autophagy activation alleviated the impaired osteogenesis in O-JBSCs. In addition, the suppression of mTOR-induced autophagy improved the aging phenotype of O-JBSCs. The activation of autophagy in LepR-Cre+/JBSCs using chemical autophagic activators reduced the alveolar bone resorption in O-mice. Therefore, our study demonstrated that ATG molecules and pathways are crucial in jawbone aging, providing novel approaches to understanding age-related jawbone loss.

Consensus recommendations for systemic therapies in the management of relapsed Ewing sarcoma: A report from the National Ewing Sarcoma Tumor Board.

Ewing sarcoma (ES) is a malignant tumor of bone and soft tissue that most often occurs in children, adolescents, and young adults. Debate and controversy remain in the management of relapsed/refractory ES (RR-ES). The authors leveraged the expertise assembled by the National Ewing Sarcoma Tumor Board, a multidisciplinary virtual tumor board that meets monthly to discuss challenging cases of ES. In this review, they focus on select topics that apply to the management of patients with RR-ES. The specific topics covered include the initial approach of such patients and discussion of the goals of care, the role of molecular testing, chemotherapy regimens and novel agents to consider, the role of maintenance therapy, and the use of high-dose chemotherapy with autologous stem cell rescue. The data referenced are often limited to subgroup analyses and/or compiled from multiple sources. Although not intended to replace the clinical judgement of treating physicians, these guidelines are intended to support clinicians and provide some clarity and recommendations for the management of patients with RR-ES. PLAIN LANGUAGE SUMMARY: Ewing sarcoma (ES) is a bone and soft tissue cancer that most often occurs in teenagers and young adults. This article uses the experience of the National Ewing Sarcoma Tumor Board, a multi-institution, multidisciplinary virtual tumor board that meets monthly to discuss challenging cases of ES and to address questions related to the treatment of patients with relapsed ES. Although not intended to replace the clinical judgement of treating physicians and limited by available data, these consensus recommendations will support clinicians who treat patients with this challenging malignancy, made even more difficult when it recurs.

Carbonate Apatite Honeycomb Scaffold-Based Drug Delivery System for Repairing Osteoporotic Bone Defects.

Osteoporotic bone defects are difficult to repair in elderly patients. This study aimed to repair osteoporotic bone defects using a combination of bone tissue engineering (BTE) and drug delivery systems (DDS). Herein, honeycomb granules (HCGs) composed of carbonate apatite microspheres were fabricated as BTE scaffolds. Each HCG possesses hexagonal macropores and abundant interconnected micropores between the microspheres. Owing to these multiscale interconnected pores, HCGs can readily contain antibodies against sclerostin (Scl), which causes imbalances in bone homeostasis. Anti-Scl antibody-loaded HCGs (Scl-Ab-HCGs) regulate the release of Scl-Abs in response to the pH of the osteoporotic environment. In ovariectomized rabbit osteoporotic femurs, HCG monotherapy forms new bone with less osteocyte damage (fewer empty bone lacunae) and fewer osteoclasts than osteoporotic bone; however, it is insufficient to prevent receptor activator of nuclear factor-kappa B ligand (RANKL) overexpression. Consequently, HCG monotherapy restores bone quantity better than no treatment but not to normal levels. In contrast, new bone tissue formed by Scl-Ab-HCG-based DDS predominantly expresses osteocalcin rather than RANKL, similar to normal bone, and shows a similar osteocyte apoptosis level, bone quantity, and osteoclast number as normal bone. Thus, Scl-Ab-HCG-based DDS is a promising approach for osteoporotic bone defect repair.

Polyacrylonitrile‒Chitosan IPN composite scaffolds that closely mimic the human trabecular bone structure for tissue engineering

Successful bone tissue engineering involves managing several important parameters, such as the design of intercommunicating porous structures, pore sizes, and the material and mechanical suitability of the material. In our work, we focused on the preparation of a synthetic scaffold that morphologically mimics the structure of human trabecular bone. The scaffolds were fabricated through the thermal modification (TM) of polyacrylonitrile. The scaffold strength was supported by a crosslinked chitosan supporting network. The prepared scaffold has imprinted pores of the appropriate size to facilitate the ingrowth and proliferation of human osteoblasts throughout the entire pore volume created by a primary porogen, sodium chloride. The resulting material has a dual porous morphological structure, in which adjustable larger pores support cellular ingrowth into the scaffold, whereas smaller pores, created using succinonitrile (SCN) as a secondary porogen, increase the diffusion of oxygen and nutrients to developing cells. The mechanical properties of the scaffold were promoted by the use of a secondary interpenetrating network (IPN) based on chitosan. The incorporation of secondary IPNs led to a significant improvement in the mechanical characteristics of the scaffold. Two crosslinking agents were used: the widely utilized glutaraldehyde (GA) and its green, nontoxic alternative, genipin (GEN).The current study introduces a synthetic scaffold that effectively mimics the structure of human trabecular bone, providing a conducive environment for osteoblast proliferation and ingrowth. We incorporated a dual porous morphology and a secondary IPN based on chitosan and found that the scaffold exhibited improved mechanical properties and nutrient diffusion capabilities. This research highlights the potential of these scaffolds for major advancements in bone tissue engineering, demonstrating their noncytotoxic nature and ability to support the adhesion and proliferation of the human osteosarcoma cell line SAOS-2. The described scaffold preparation technique may offer distinct advantages over current high-end methods such as 3D printing. The primary benefit lies in its very simple instrumentation, which enables the creation of a complex trabecular bone morphology with both macro- and microporosity in the bulk, which is still challenging for common 3D printers. Additionally, IPN with chitosan can be postmodified, substantially expanding the potential applications of these scaffolds.

Incorporation of calcium phosphate cement into decellularized extracellular matrix enhances its bone regenerative properties

Decellularized extracellular matrix (dECM) hydrogels are engineered constructs that are widely-used in the field of regenerative medicine. However, the development of ECM-based hydrogels for bone tissue engineering requires enhancement in its osteogenic properties. For this purpose, we initially employed bone-derived dECM hydrogel (dECM-Hy) in combination with calcium phosphate cement (CPC) paste to improve the biological and structural properties of the dECM hydrogel. A decellularization protocol for bovine bone was developed to prepare dECM-Hy, and the mechanically-tuned dECM/CPC-Hy was built based on both rheological and mechanical characteristics. The dECM/CPC-Hy displayed a double swelling ratio and compressive strength. An interconnected structure with distinct hydroxyapatite crystals was evident in dECM/CPC-Hy. The expression levels of Alp, Runx2 and Ocn genes were upregulated in dECM/CPC-Hy compared to the dECM-Hy. A 14-day follow-up of the rats receiving subcutaneous implanted dECM-Hy, dECM/CPC-Hy and mesenchymal stem cells (MSCs)-embedded (dECM/CPC/MSCs-Hy) showed no toxicity, inflammatory factor expression or pathological changes. Radiography and computed tomography (CT) of the calvarial defects revealed new bone formation and elevated number of osteoblasts-osteocytes and osteons in dECM/CPC-Hy and dECM/CPC/MSCs-Hy compared to the control groups. These findings indicate that the dECM/CPC-Hy has substantial potential for bone tissue engineering.

Research progress of electrospinning polyurethane fiber in the field of biomedical tissue engineering

Polyurethane materials have good biocompatibility, blood compatibility, mechanical properties, fatigue resistance and processability, and have always been highly valued as medical materials. Polyurethane fibers prepared by electrostatic spinning technology can better mimic the structure of natural extracellular matrices (ECMs), and seed cells can adhere and proliferate better to meet the requirements of tissue repair and reconstruction. The purpose of this review is to present the research progress of electrostatically spun polyurethane fibers in bone tissue engineering, skin tissue engineering, neural tissue engineering, vascular tissue engineering and cardiac tissue engineering, so that researchers can understand the practical applications of electrostatically spun polyurethane fibers in tissue engineering and regenerative medicine.

Antibiotic-eluting scaffolds with responsive dual-release kinetics facilitate bone healing and eliminate S. aureus infection

Osteomyelitis (OM) is a progressive, inflammatory infection of bone caused predominately by Staphylococcus aureus. Herein, we engineered an antibiotic-eluting collagen-hydroxyapatite scaffold capable of eliminating infection and facilitating bone healing. An iterative freeze-drying and chemical crosslinking approach was leveraged to modify antibiotic release kinetics, resulting in a layered dual-release system whereby an initial rapid release of antibiotic to clear infection was followed by a sustained controlled release to prevent reoccurrence of infection. We observed that the presence of microbial collagenase accelerated antibiotic release from the crosslinked layer of the scaffold, indicating that the material is responsive to microbial activity. As exemplar drugs, vancomycin and gentamicin-eluting scaffolds were demonstrated to be bactericidal, and supported osteogenesis in vitro. In a pilot murine model of OM, vancomycin-eluting scaffolds were observed to reduce S. aureus infection within the tibia. Finally, in a rabbit model of chronic OM, gentamicin-eluting scaffolds both facilitated radial bone defect healing and eliminated S. aureus infection. These results show that antibiotic-eluting collagen-hydroxyapatite scaffolds are a one-stage therapy for OM, which when implanted into infected bone defects simultaneously eradicate infection and facilitate bone tissue healing.

Optimizing number of Raman spectra using an artificial neural network guided Monte Carlo simulation approach to analyze human cortical bone

This study presents a novel methodology for optimizing the number of Raman spectra required per sample for human bone compositional analysis. The methodology integrates Artificial Neural Network (ANN) and Monte Carlo Simulation (MCS). We demonstrate the robustness of ANN in enabling prediction of Raman spectroscopy-based bone quality properties even with limited spectral inputs. The ANN algorithms tailored to individual sex and age groups, which enhance the specificity and accuracy of predictions in bone quality properties. In addition, ANN guided MCS systematically explores the variability and uncertainty inherent in different sample sizes and spectral datasets, leading to the identification of an optimal number of spectra per sample for characterizing human bone tissues. The findings suggest that as low as 2 spectra are sufficient for biochemical analysis of bone, with R2 values between real and predicted values of v1/PO4/Amide I and ∼I1670/I1640 ratios, ranging from 0.60 to 0.89. Our results also suggest that up to 8 spectra could be optimal when balancing other factors. This optimized approach streamlines experimental workflows, reduces data and acquisition costs. Additionally, our study highlights the potential for advancing Raman spectroscopy in bone research through the innovative integration of ANN-guided probabilistic modeling techniques. This research could significantly contribute to the broader landscape of bone quality analyses by establishing a precedent for optimizing the number of Raman spectra with sophisticated computational tools. It also sets a novel platform for future optimization studies in Raman spectroscopy applications in biomedical field.

Features of densitometric assessment of bone tissue parameters in the verification of osteoporotic changes in young men with Hodgkin's lymphoma

BACKGROUND: The development of osteoporosis in males is associated with a complex interaction of various factors, including: deficiency of sex hormones, heredity, physical activity, nicotine use, etc. In young men with Hodgkin's lymphoma, the development of the osteoporotic process is very multifactorial due to the influence of tumor cells, pathogenetic therapy, as well as a secondary decrease in androgens on the composition of bone tissue and a decrease in BMD. AIMS: To determine the parameters of bone mineral density in young men with Hodgkin's lymphoma and to assess the risks of osteoporosis associated with pathogenetic therapy of the disease. MATERIALS AND METHODS: The study included 26 men, of whom 14 were diagnosed with Hodgkin's lymphoma, and the control group included 12 healthy males. All patients underwent a two-adsorption X-ray scan of bone tissue in the lumbar spine, as well as the femur. The following parameters were identified and studied: MPC, Z-criterion, T-criterion for all participants in both study groups. RESULTS: The analysis of bone mineral density in patients with Hodgkin's lymphoma showed a significant decrease in the parameter in two measurement areas: the lumbar spine and the proximal femur. Significantly more often in men with Hodgkin's lymphoma, a decrease in the Z-criterion to osteopenia/osteoporosis was noted in the lumbar spine. A decrease in the T-criterion in patients with Hodgkin's lymphoma to osteopenia/osteoporosis was noted in the proximal and femoral neck. CONCLUSIONS: Young men with Hodgkin's lymphoma who have received pathogenetic therapy, including cytostatic drugs and glucocorticosteroids, are at high risk of developing the osteoporotic process and its complications. The decrease in densitometric parameters (MPC, Z-criterion, T-criterion) in patients with Hodgkin's lymphoma to osteopenia/osteoporosis, noted in the proximal part and femoral neck, indicates a high risk of fractures of this localization and requires the development of a strategy for their prevention.

Protocatechualdehyde inhibits iron overload-induced bone loss by inhibiting inflammation and oxidative stress in senile rats

The accumulating evidence has made it clear that iron overload is a crucial mechanism in bone loss. Protocatechualdehyde (PCA) has also been used to prevent osteoporosis in recent years. Whether PCA can reverse the harmful effects of iron overload on bone mass in aged rats is still unknown. Therefore, this study aimed to assess the role of PCA in iron overload-induced bone loss in senile rats. In the aged rat model, we observed that iron overload affects bone metabolism and bone remodeling, manifested by bone loss and decreased bone mineral density. The administration of PCA effectively mitigated the detrimental effects caused by iron overload, and concomitant reduction in MDA serum levels and elevation of SOD were noted. In addition, PCA-treated rats were observed to have significantly increased bone mass and elevated expression of SIRT3，BMP2，SOD2 and reduced expression of TNF-α in bone tissue. We also observed that PCA was able to reduce oxidative stress and inflammation and restore the imbalance in bone metabolism. When MC3T3-E1 and RAW264.7 cells induced osteoblast and osteoclasts differentiation, PCA intervention could significantly recover the restriction of osteogenic differentiation and up-regulation of osteoclast differentiation treated by iron overload. Further, by detecting changes in ROS, SOD, MDA, expression of SIRT3 and mitochondrial membrane potentials, we confirm that the damage caused to cells by iron overload is associated with decreased SIRT3 activity, and that 3-TYP have similar effects on oxidative stress caused by FAC. In conclusion, PCA can resist iron overload-induced bone damage by improving SIRT3 activity, anti-inflammatory and anti-oxidative stress.

Polycaprolactone in Bone Tissue Engineering: A Comprehensive Review of Innovations in Scaffold Fabrication and Surface Modifications.

Bone tissue engineering has seen significant advancements with innovative scaffold fabrication techniques such as 3D printing. This review focuses on enhancing polycaprolactone (PCL) scaffold properties through structural modifications, including surface treatments, pore architecture adjustments, and the incorporation of biomaterials like hydroxyapatite (HA). These modifications aim to improve scaffold conformation, cellular behavior, and mechanical performance, with particular emphasis on the role of mesenchymal stem cells (MSCs) in bone regeneration. The review also explores the potential of integrating nanomaterials and graphene oxide (GO) to further enhance the mechanical and biological properties of PCL scaffolds. Future directions involve optimizing scaffold structures and compositions for improved bone tissue regeneration outcomes.

Biomimetic Scaffolds of Calcium-Based Materials for Bone Regeneration.

Calcium-based materials, such as calcium carbonate, calcium phosphate, and calcium silicate, have attracted significant attention in biomedical research, owing to their unique physicochemical properties and versatile applications. The distinctive characteristics of these materials, including their inherent biocompatibility and tunable structures, hold significant promise for applications in bone regeneration and tissue engineering. This review explores the biomedical applications of calcium-containing materials, particularly for bone regeneration. Their remarkable biocompatibility, tunable nanostructures, and multifaceted functionalities make them pivotal for advancing regenerative medicine, drug delivery system, and biomimetic scaffold applications. The evolving landscape of biomedical research continues to uncover new possibilities, positioning calcium-based materials as key contributors to the next generation of innovative biomaterial scaffolds.

Technical and biological reliability of pQCT measured bone and muscle tissue quality across the age-span

Introduction: Reliable peripheral quantitative computed tomography (pQCT) assessment is essential to the accurate longitudinal reporting of bone and muscle quality. However, the between-day reliability of pQCT and the influence of age on outcome reliability is currently unknown.Objective: To quantify the same- and between-day reliability of morphological pQCT at proximal and distal segments of the forearm, shank, and thigh, and explore the influence of participant body size, age, and sex on outcome reliability.Methods: Men and women (49 % female, 18-85 years, n=72-86) completed two consecutive-day pQCT testing sessions, where repeat measurements were conducted on day-one for technical error, and between-day for biological error quantification. Testing was undertaken following best practice body composition testing guidance, including standardized presentation and consistent time-of-day.Results: All measurements of bone were classified as having ‘good’ to ‘excellent’ reliability [intraclass correlation coefficient (r=0.786- 0.999], as were measurements of muscle area (ICC r=0.991-0.999) and total fat (r=0.996-0.999). However, between- and same-day muscle density measurements at the thigh and forearm were classified as ‘poor’ (r=0.476) and ‘moderate’ (r=0.622), respectively. Likewise, intramuscular fat area at the thigh was classified as ‘moderate’ (r=0.737) for between-day measurement. Biological error was inflated compared to technical error by an average of 0.4 % for most measurements. Error values tended to increase proportionally with the amount of tissue quantified and males had significantly greater biological error for measurement of distal tibial bone (p<0.002) and trabecular area (p<0.002). Biological error was inflated among older adults for measurement of forearm muscle density (p<0.002).Conclusions: Most pQCT outcomes can be implemented with confidence, especially outcomes that assess bone area and density at any of the radial, tibial, and femoral sites investigated herein. However, it is important to account for the influence of biological measurement error in further studies, especially for muscle and intramuscular fat outcomes derived by pQCT.

Impact of compression forces on different mesenchymal stem cell types regarding orthodontic indication.

The potential of stem cells, for example upper periodontal ligament stem cells from the maxilla (u-PDLSC) and from the mandible (l-PDLSC), adipose-derived mesenchymal stem cells (AD-MSC), and bone marrow-derived mesenchymal stem cells (BM-MSC), with respect to periodontal remodeling and orthodontic treatment is of great importance. In this work, we focus on the comprehensive adaptability of different stem cell types to mechanical forces with the aim to better understanding cell behavior and to refine a new mechanistic approach to investigate periodontal remodeling. We comprehensively analyze stem cells and observe distinct morphological and proliferation changes under compression in dependence on stem cell type. The cell signaling of extracellular signal-regulated kinase (ERK)and protein kinase B, also calledAKT, and their respective phosphorylation shows diverse responses to compression. Additionally, vascular endothelial growth factor and hepatocyte growth factor secretion were reduced under mechanical stress in all cell types, with cell-specific variations. Osteoprotegerin secretion was reduced under compression, particularly in u-PDLSC. At least, diverse soluble receptors of NF-kB-ligand secretion patterns among cell types under pressure were observed, providing crucial insights into bone metabolism. These findings offer a deeper understanding of the behavior of mesenchymal stem cells under mechanical stimuli, highlighting their roles in bone remodeling, wound healing, and tissue regeneration in orthodontic and regenerative medicine contexts. Our results underscore the potential of u-PDLSC, l-PDLSC, and AD-MSC in periodontal regeneration, with AD-MSC showing notable resilience under compression, indicating its promising role for further investigation for orthodontic research. While these findings are encouraging, further research is essential to fully comprehend the mechanism of stem cell-based periodontal therapies.

Prevalence of malignant neoplasms in celiac disease patients - a nationwide United States population-based study.

Celiac disease (CeD) is an autoimmune disorder triggered by the immune response to gluten in genetically predisposed individuals. Recent research has unveiled a heightened risk of developing specific malignant neoplasms (MN) and various malignancies, including gastrointestinal, lymphomas, skin, and others, in individuals with CeD. To investigate the prevalence of MN in hospitalized CeD patients in the United States. Using data from the National Inpatient Sample spanning two decades, from January 2000 to December 2019, we identified 529842 CeD patients, of which 78128 (14.75%) had MN. Propensity score matching, based on age, sex, race, and calendar year, was employed to compare CeD patients with the general non-CeD population at a 1:1 ratio. Positive associations were observed for several malignancies, including small intestine, lymphoma, nonmelanoma skin, liver, melanoma skin, pancreas myelodysplastic syndrome, biliary, stomach, and other neuroendocrine tumors (excluding small and large intestine malignant carcinoid), leukemia, uterus, and testis. Conversely, CeD patients exhibited a reduced risk of respiratory and secondary malignancies. Moreover, certain malignancies showed null associations with CeD, including head and neck, nervous system, esophagus, colorectal, anus, breast, malignant carcinoids, bone and connective tissues, myeloma, cervix, and ovary cancers. Our study is unique in highlighting the detailed results of positive, negative, or null associations between different hematologic and solid malignancies and CeD. Furthermore, it offers insights into evolving trends in CeD hospital outcomes, shedding light on advancements in its management over the past two decades. These findings contribute valuable information to the understanding of CeD's impact on health and healthcare utilization.

Biomedical Composites of Polycaprolactone/Hydroxyapatite for Bioplotting: Comprehensive Interpretation of the Reinforcement Course.

Robust materials in medical applications are sought after and researched, especially for 3D printing in bone tissue engineering. Poly[ε-caprolactone] (PCL) is a commonly used polymer for scaffolding and other medical uses. Its strength is a drawback compared to other polymers. Herein, PCL was mixed with hydroxyapatite (HAp). Composites were developed at various concentrations (0.0-8.0 wt. %, 2.0 step), aiming to enhance the strength of PCL with a biocompatible additive in bioplotting. Initially, pellets were derived from the shredding of filaments extruded after mixing PCL and HAp at predetermined quantities for each composite. Specimens were then manufactured by bioplotting 3D printing. The samples were tested for their thermal and rheological properties and were also mechanically, morphologically, and chemically examined. The mechanical properties included tensile and flexural investigations, while morphological and chemical examinations were carried out employing scanning electron microscopy and energy dispersive spectroscopy, respectively. The structure of the manufactured specimens was analyzed using micro-computed tomography with regard to both their dimensional deviations and voids. PCL/HAp 6.0 wt. % was the composite that showed the most enhanced mechanical (14.6% strength improvement) and structural properties, proving the efficiency of HAp as a reinforcement filler in medical applications.

Advanced 3D printed bone scaffolds with sodium alginate/Tri-calcium phosphate/probiotic bacterial hydroxyapatite: Enhanced mechanical and biocompatible properties for bone tissue engineering

IntroductionThe increasing prevalence of severe bone diseases, such as osteoporosis and critical bone defects, necessitates the development of more effective bone substitutes. This study addresses this need by investigating 3D-printed bone scaffolds composed of sodium alginate and tricalcium phosphate, enhanced with three distinct types of hydroxyapatite (HA): bovine-derived HA, commercially available HA, and HA enriched with probiotic bacteria. We aim to evaluate the performance of these scaffolds in terms of mechanical strength, biocompatibility, and their ability to support bone regeneration. MethodsThe scaffolds were analyzed through various tests, including X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) to characterization. Scanning Electron Microscopy (SEM) was used to examine pore structure, while swelling and degradation tests evaluated the scaffold's stability. Compression testing determined mechanical strength, and in vitro cell culture assays assessed cell proliferation, osteogenic differentiation, and biomineralization. ResultsSEM results indicated that 3D scaffolds with probiotic bacterial HA had the desired 472 μm pore size. These scaffolds demonstrated a strain of 29.26 % and a compressive strength of 10 MPa, meeting the mechanical standards of human trabecular bone. Cell culture studies revealed enhanced cell proliferation by 50 %, osteogenic differentiation with 15.3 U/mg ALP activity, and 1.22-fold biomineralization, suggesting they are highly biocompatible and promote bone growth. ConclusionProbiotic bacterial HA scaffolds exhibit ideal properties and biocompatibility, enhancing bone regeneration and serving as an ideal alternative to chemical types.

Anti-inflammatory, antiosteoporotic, and bone protective effect of hydroxysafflor yellow A against glucocorticoid-induced osteoporosis in rats.

Osteoporosis is a common condition worldwide, affecting millions of people. Women are more commonly affected than men, and the risk increases with age. Inflammatory reaction plays a crucial role in the expansion of osteoporosis. Osteoporosis is characterized by a gradual decline in bone density and bone tissue quality, which increases fragility and raises the risk of fractures. We scrutinized the anti-osteoporosis effect of hydroxysafflor yellow A (HYA) against glucocorticoid-induced osteoporosis (GIOP) in rats. In-silico study was carried out on EGFR receptor (PDBID: 1m17), Estrogen Alpha (PDB id: 2IOG), MTOR (PDB id: 4FA6), RANKL (PDB id: 1S55), and VEGFR2 (PDB id: 1YWN) protein. For this investigation, Sprague-Dawley (SD) rats were used, and they received an oral dose of HYA (5, 10, and 20 mg/kg, b.w.) along with a subcutaneous injection of dexamethasone (0.1 mg/kg/day) to induce osteoporosis. The biomechanical, bone parameters, antioxidant, cytokines, inflammatory, nutrients, hormones, and urine parameters were estimated. HYA treatment significantly suppressed the body weight and altered the organ weight. HYA treatment remarkably suppressed the level of alkaline phosphatase, acid phosphatase, and improved the level of bone mineral density (total, proximal, mild, and dis). HYA treatment restored the level of calcium (Ca), phosphorus (P), estradiol (E2), and parathyroid hormone near to the normal level. HYA treatment remarkably altered the level of biomechanical parameters, antioxidant, cytokines, urine, and inflammatory parameters. HYA treatment altered the level of osteoprotegerin (OPG), receptor activator of nuclear factor kappa beta (RANKL) and RANKL/OPG ratio. The result clearly showed the anti-osteoporosis effect of HYA against GIOP-induced osteoporosis in rats via alteration of antioxidant, cytokines, inflammatory, and bone protective parameters.

Mechanical and Permeability Properties of Radial-Gradient Bone Scaffolds Developed by Voronoi Tessellation for Bone Tissue Engineering

Mechanical and Permeability Properties of Radial-Gradient Bone Scaffolds Developed by Voronoi Tessellation for Bone Tissue Engineering