Bone Regeneration Membrane Research Articles

Biomimetic mineralization of collagen from fish scale to construct a functionally gradient lamellar bone-like structure for guided bone regeneration

Wide used guided bone regeneration (GBR) membrane materials, such as collagen, Teflon, and other synthesized polymers, present a great challenge in term of integrating the mechanical property and degradation rate when addressing critical bone defects. Therefore, inspired by the distinctive architecture of fish scales, this study utilized epigallocatechin gallate to modify decellularized fish scales following biomimetic mineralization to fabricate a GBR membrane that mimics the structure of lamellar bone. The structure, physical and chemical properties, and biological functions of the novel GBR membrane were evaluated. Results indicate that the decellularized fish scale with 5 remineralization cycles (5R-E-DCFS) exhibited a composite and structure similar to natural bone and had a special functionally gradient mineral contents character, demonstrating excellent mechanical properties, hydrophilicity, and degradation properties. In vitro, the 5R-E-DCFS membrane exhibited excellent cytocompatibility promoting Sprague-Dawley (SD) rat bone marrow mesenchymal stem cell proliferation and differentiation up-regulating the expression of osteogenic-related genes and proteins. Furthermore, in vivo, the 5R-E-DCFS membrane promoted the critical skull bone defects of SD rats repairment and regeneration. Therefore, this innovative biomimetic membrane holds substantial clinical potential as an ideal GBR membrane with mechanical properties for space-making and suitable degradation rate for bone regeneration to manage bone defects.

Mechanical Properties, Microstructure, Degradation Behavior, and Biocompatibility of Zn-0.5Ti-0.5Fe and Zn-0.5Ti-0.5Mg Guided Bone Regeneration Barrier Membranes Prepared Using a Powder Metallurgy Method.

Pure zinc exhibits low mechanical properties, making it unsuitable for use in guided bone regeneration (GBR) membranes. The present study focused on the preparation of Zn alloy GBR films using powder metallurgy, resulting in Zn-0.5Ti-0.5Fe and Zn-0.5Ti-0.5Mg alloy GBR films. The tensile strength of the pure Zn GBR film measured 85.9 MPa, while an elongation at break was 13.5%. In contrast, Zn-0.5Ti-0.5Fe and Zn-0.5Ti-0.5Mg alloy GBR films demonstrated significantly higher tensile strengths of 145.3 and 164.4 MPa, respectively, whereas elongations at break were 30.2% and 19.3%. The addition of Ti, Fe, and Mg substantially enhanced the mechanical properties of the zinc alloys. Corrosion analysis revealed that Zn-0.5Ti-0.5Fe and Zn-0.5Ti-0.5Mg alloy GBR membranes exhibited corrosion potentials of -1.298 and -1.316 V, respectively, with corresponding corrosion current densities of 12.11 and 13.32 μA/cm2. These values were translated to corrosion rates of 0.181 and 0.199 mm/year, indicating faster corrosion rates compared to pure Zn GBR membranes, which displayed a corrosion rate of 0.108 mm/year. Notably, both Zn-based alloy GBR membranes demonstrated excellent cytocompatibility, with a cytotoxicity rating of 0-1 in 25% leachate. Additionally, these membranes exhibited favorable osteogenic ability, as evidenced by the quantitative bone volume/tissue volume ratios (BV/TV) of new bone formation, which reached 30.3 ± 1.4% and 65.5 ± 1.8% for the Zn-0.5Ti-0.5Fe and Zn-0.5Ti-0.5Mg alloy GBR membranes, respectively, after 12 weeks of implantation. These results highlighted the significant potential for facilitating new bone growth. The proposed Zn-0.5Ti-0.5Fe and Zn-0.5Ti-0.5Mg alloy GBR membranes showed promise as viable biodegradable materials for future clinical studies.

Development and characterization of nitazoxanide-loaded poly(ε-caprolactone) membrane for GTR/GBR applications

ObjectiveGuided tissue/guided bone regeneration (GTR/GBR) membranes are widely used for periodontal bone regeneration, but their success depends on a bacteria-free environment. Systemic antibiotic treatment often proves inadequate, moreover, the increasing prevalence of antibiotic resistance in oral infections exacerbates this challenge. This study aimed to fabricate antibacterial membranes using a new class of antibiotics for local drug delivery, to eradicate infections and promote tissue regeneration. MethodsMembranes loaded with nitazoxanide (NTZ) were fabricated via electrospinning using poly(ε-caprolactone) (PCL) with varying concentrations of NTZ (0 %, 2.5 %, and 5 % w/w) relative to the polymer weight. Morphochemical of NTZ-loaded membranes were assessed using scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) and Fourier Transform Infrared spectroscopy (FTIR). Mechanical properties were evaluated using universal testing machine and NTZ release profile from membranes was determined by spectrophotometer (λmax = 444) for 14 days. Antimicrobial efficacy against periodontal pathogens, cell compatibility and mineralization were evaluated using periodontal ligament stem cells (PDLSCs). ResultsOptimized spinning parameter maintained a uniform fiber diameter and successful loading of NTZ was confirmed by SEM-EDS and FTIR. NTZ incorporation did not significantly affect mechanical properties, whereas the drug release kinetics showed an initial burst, followed by sustained release over 14 days. NTZ-loaded membranes demonstrated antibacterial activity against Aggregatibacter actinomycetemcomitans (Aa) and Fusobacterium nucleatum (Fn). Importantly, the presence of NTZ showed minimal cell toxicity; however, it reduced the mineralization potential compared with that of the pure PCL membrane, which increased over time. SignificanceTaken together, these findings established that NTZ-loaded membranes could be promising barrier membrane to counteract microbial environment and aid periodontal bone regeneration.

Phased Ions‐Release Bilayer‐Guided Bone Regeneration Membrane with Nanostructure‐Mediated Antibacterial Adhesion

Phased Ions‐Release Bilayer‐Guided Bone Regeneration Membrane with Nanostructure‐Mediated Antibacterial Adhesion

Emulsion electrospun epigallocatechin gallate-loaded silk fibroin/polycaprolactone nanofibrous membranes for enhancing guided bone regeneration

Guided bone regeneration (GBR) membranes play an important role in oral bone regeneration. However, enhancing their bone regeneration potential and antibacterial properties is crucial. Herein, silk fibroin (SF)/polycaprolactone (PCL) core-shell nanofibers loaded with epigallocatechin gallate (EGCG) were prepared using emulsion electrospinning. The nanofibrous membranes were characterized via scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, water contact angle (CA) measurement, mechanical properties testing, drug release kinetics, and 1,1-diphenyl-2-picryl-hydrazyl radical (DPPH) free radical scavenging assay. Mouse pre-osteoblast MC3T3-E1 cells were used to assess the biological characteristics, cytocompatibility, and osteogenic differentiation potential of the nanofibrous membrane. Additionally, the antibacterial properties againstStaphylococcus aureus (S. aureus)andEscherichia coli (E. coli)were evaluated. The nanofibers prepared by emulsion electrospinning exhibited a stable core-shell structure with a smooth and continuous surface. The tensile strength of the SF/PCL membrane loaded with EGCG was 3.88 ± 0.15 Mpa, the water CA was 50°, and the DPPH clearance rate at 24 h was 81.73% ± 0.07%. The EGCG release rate of membranes prepared by emulsion electrospinning was reduced by 12% within 72 h compared to that of membranes prepared via traditional electrospinning.In vitroexperiments indicate that the core-shell membranes loaded with EGCG demonstrated good cell compatibility and promoted adhesion, proliferation, and osteogenic differentiation of MC3T3-E1 cells. Furthermore, the EGCG-loaded membranes exhibited inhibitory effects onE. coliandS. aureus. These findings indicate that core-shell nanofibrous membranes encapsulated with EGCG prepared using emulsion electrospinning possess good antioxidant, osteogenic, and antibacterial properties, making them potential candidates for research in GBR materials.

Multifunctional Bone Regeneration Membrane with Flexibility, Electrical Stimulation Activity and Osteoinductive Activity.

The use of membrane-based guided bone regeneration techniques has great potential for single-stage reconstruction of critical-sized bone defects. Here, a multifunctional bone regeneration membrane combining flexible elasticity, electrical stimulation (ES) and osteoinductive activity is developed by in situ doping of MXene 2D nanomaterials with conductive functionality and β-TCP particles into a Poly(lactic acid-carbonate (PDT) composite nano-absorbable membrane (P/T/MXene) via electrostatic spinning technique. The composite membrane has good feasibility due to its temperature sensitivity, elastic memory capacity, coordinated degradation profile and easy preparation process. In vitro experiments showed the P/T/MXene membrane effectively promoted the recruitment and osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) under ES and enhanced the angiogenic capacity of endothelial cells, which synergistically promoted bone regeneration through neovascularization. In addition, an in vivo rat model of cranial bone defects further confirmed the bone regeneration efficacy of the P/T/MXene membrane. In conclusion, the developed P/T/MXene membrane can effectively promote bone regeneration through their synergistic multifunctional effects, suggesting the membranes have great potential for guiding tissue regeneration and providing guidance for the biomaterials design.

Research status and prospects of biodegradable magnesium-based metal guided bone regeneration membranes.

Biodegradable magnesium-based metal guided bone regeneration (GBR) membranes possess excellent mechanical properties, biodegradability, and osteopromotive capabilities, making them ideal implants for the treatment of maxillofacial bone defects. This review summarizes the current status and future research trends related to magnesium-based GBR membranes. First, the research history and application fields of magnesium-based metals are introduced, and the advantages of the use of magnesium-based materials for GBR membranes, including their mechanical properties, biocompatibility, osteopromotive performance, and underlying mechanisms are discussed. Finally, this review addresses the current limitations of magnesium-based GBR membranes and their applications and prospects in the field of dentistry. In conclusion, considerable advancements have been in fundamental and translational research on magnesium-based GBR membranes, which lays a crucial foundation for the treatment of maxillofacial bone defects.

Electrospun polycaprolactone-chitosan nanofibers on a zinc mesh as biodegradable guided bone-regeneration membranes with enhanced mechanical, antibacterial, and osteogenic properties for alveolar bone-repair applications

Guided bone-regeneration membrane (GBRM) is commonly used in bone-repair surgery because it blocks fibroblast proliferation and provides spatial support in bone-defect spaces. However, the need for removal surgery and the lack of antibacterial properties of conventional GBRM limit its therapeutic applicability for alveolar bone defects. Here we developed a GBRM for alveolar bone-repair and -regeneration applications through double-sided electrospinning of polycaprolactone and chitosan layers on a Zn mesh surface (denoted DSZM). The DSZM showed a UTS of ∼25.6 MPa, elongation of ∼16.1%, strength-elongation product of ∼0.413 GPa%, and ultrahigh spatial maintenance ability, and the UTS was over 6 times higher than that of commercial Bio-Gide membrane. The DSZM exhibited a corrosion rate of ∼17 µm/y and a Zn ion concentration of ∼0.23 µg/ml after 1 month of immersion in Hanks’ solution. The DSZM showed direct and indirect cytocompatibility with exceptional osteogenic differentiation and calcium deposition toward MC3T3-E1 cells. Further, the DSZM showed strongly sustained antibacterial activity against S. aureus and osteogenesis in a rat critical-sized maxillary defect model. Overall, the DSZM fits the requirements for alveolar bone-repair and -regeneration applications as a biodegradable GBRM material due to its spatial support, suitable degradability, cytocompatibility, and antibacterial and osteogenic capabilities. Statement of significanceThis work reports the mechanical properties, antibacterial ability and osteogenic properties of electrospun PCL-CS nanofiber on Zn mesh as biodegradable guided bone-regeneration membrane for alveolar bone-repair applications. Our findings demonstrate that the DSZM prepared by double-sided electrospinning of PCL-CS layers on Zn mesh showed a UTS of ∼25.6 MPa, elongation of ∼16.1%, strength-elongation product of ∼0.413 GPa%, and ultrahigh spatial maintenance ability, and the UTS was over 6 times greater than that of commercial Bio-Gide® membrane. The DSZM showed direct and indirect cytocompatibility with exceptional osteogenic differentiation and calcium deposition toward MC3T3-E1 cells. Further, the DSZM showed strongly sustained antibacterial activity against S. aureus and osteogenesis in a rat critical-sized maxillary defect model.

Mechanical Properties, biodegradable Behavior and biocompatibility of Zn-0.5Ti alloy membranes produced by powder metallurgy for Guided bone regeneration

The Zn-0.5Ti alloy bone regeneration membranes, prepared via powder metallurgy, hot extrusion, and hot rolling, exhibit robust mechanical properties (tensile strength: 122.5 ± 1.8 MPa, elongation: 18.3 ± 0.7 %), appropriate degradation rate (0.127 mm/year in SBF solution), and good biocompatibility (cytotoxicity grade 0–1). After 4 and 8 weeks of implantation, the alloy showed significant bone growth (bone volume ratios (BV/TV): 11.3 ± 1.8 % and 23.1 ± 3.5 %, respectively, measured by Micro-CT), indicating promising potential as a GBR membrane material.

In vitro and in vivo studies of a biodegradable Zn-4Ag-0.1Sc alloy with high strength-elongation product, cytocompatibility, osteogenic differentiation, and anti-infection properties for guided bone-regeneration membrane applications

Zinc-silver (Zn-Ag) alloys are generally promising guided bone-regeneration membrane (GBRM) materials due to their moderate degradability, osteogenic differentiation, and antibacterial properties. However, Zn-Ag alloys often display microstructural inhomogeneity and mechanical instability due to the formation of coarse Ag-rich second phases. In this study, Zn-4Ag and Zn-4Ag-0.1Sc (denoted ZA and ZAS, respectively) were comparatively investigated, and the ZAS exhibited a suitable degradation rate, high strength-elongation product, cytocompatibility, antibacterial capacity, and in vitro and in vivo osteogenic properties, making it highly appropriate for GBRM applications. Among all the as-cast and hot-rolled (HR) samples, the HR ZAS had the highest ultimate tensile strength of ∼260.5 MPa, tensile yield strength of ∼202.0 MPa, and elongation of ∼72.7%. The HR ZAS also exhibited a higher degradation rate of ∼36.5 µm/a in Hanks’ solution than those of the HR ZA, while its diluted extract was more cytocompatible and capable of osteogenic differentiation toward both MG-63 and MC3T3-E1 cells. The HR ZAS showed an exceptionally effective antibacterial ability against S. aureus in both in vitro antibacterial testing and in vivo subcutaneous infection models. Further, the HR ZAS demonstrated better osteogenic and histocompatibility properties than those of pure Zn in a rat skull defect model.

Shear Flow-Assembled Janus Membrane with Bifunctional Osteogenic and Antibacterial Effects for Guided Bone Regeneration.

Guided bone regeneration (GBR) membranes that reside at the interface between the bone and soft tissues for bone repair attract increasing attention, but currently developed GBR membranes suffer from relatively poor osteogenic and antibacterial effects as well as limited mechanical property and biodegradability. We present here the design and fabrication of a bifunctional Janus GBR membrane based on a shear flow-driven layer by a layer self-assembly approach. The Janus GBR membrane comprises a calcium phosphate-collagen/polyethylene glycol (CaP@COL/PEG) layer and a chitosan/poly(acrylic acid) (CHI/PAA) layer on different sides of a collagen membrane to form a sandwich structure. The membrane exhibits good mechanical stability and tailored biodegradability. It is found that the CaP@COL/PEG layer and CHI/PAA layer contribute to the osteogenic differentiation and antibacterial function, respectively. In comparison with the control group, the Janus GBR membrane displays a 2.52-time and 1.84-time enhancement in respective volume and density of newly generated bone. The greatly improved bone repair ability of the Janus GBR membrane is further confirmed through histological analysis, and it has great potential for practical applications in bone tissue engineering.

The immobilization of a cyclo-trimer of acetonitrile onto poly (lactic acid) (PLA) surface: Improvement of attachment and differentiation of osteoblast-like cells

Poly lactic acid (PLA) has been commercialized as guided bone regeneration membranes. However, PLA membranes are associated with their inherent shortcomings such as insufficient osteoinductive ability. Herein, a cyclo-trimer of acetonitrile (CTA) was covalently immobilized onto PLA films, which would combine the bioactive functions of CTA and good degradability of PLA. The immobilization of CTA enhanced the initial attachment, cell viability, and osteogenic differentiation of osteoblast-like cells. The BMP-SMAD signaling pathway may be involved in the enhancement of osteoinductive capacity of CTA immobilized PLA films. Overall, PLA-CTA films shows a potential for guided bone regeneration.

Osteoinductive micro-nano guided bone regeneration membrane for in situ bone defect repair

BackgroundBiomaterials used in bone tissue engineering must fulfill the requirements of osteoconduction, osteoinduction, and osseointegration. However, biomaterials with good osteoconductive properties face several challenges, including inadequate vascularization, limited osteoinduction and barrier ability, as well as the potential to trigger immune and inflammatory responses. Therefore, there is an urgent need to develop guided bone regeneration membranes as a crucial component of tissue engineering strategies for repairing bone defects.MethodsThe mZIF-8/PLA membrane was prepared using electrospinning technology and simulated body fluid external mineralization method. Its ability to induce biomimetic mineralization was evaluated through TEM, EDS, XRD, FT-IR, zeta potential, and wettability techniques. The biocompatibility, osteoinduction properties, and osteo-immunomodulatory effects of the mZIF-8/PLA membrane were comprehensively evaluated by examining cell behaviors of surface-seeded BMSCs and macrophages, as well as the regulation of cellular genes and protein levels using PCR and WB. In vivo, the mZIF-8/PLA membrane’s potential to promote bone regeneration and angiogenesis was assessed through Micro-CT and immunohistochemical staining.ResultsThe mineralized deposition enhances hydrophilicity and cell compatibility of mZIF-8/PLA membrane. mZIF-8/PLA membrane promotes up-regulation of osteogenesis and angiogenesis related factors in BMSCs. Moreover, it induces the polarization of macrophages towards the M2 phenotype and modulates the local immune microenvironment. After 4-weeks of implantation, the mZIF-8/PLA membrane successfully bridges critical bone defects and almost completely repairs the defect area after 12-weeks, while significantly improving the strength and vascularization of new bone.ConclusionsThe mZIF-8/PLA membrane with dual osteoconductive and immunomodulatory abilities could pave new research paths for bone tissue engineering.

Fabrication of Bioresorbable Barrier Membranes from Gelatin/Poly(4-Hydroxybutyrate) (P4HB).

Dental implant surgery is a procedure that replaces damaged or missing teeth with an artificial implant. During this procedure, guided bone regeneration (GBR) membranes are commonly used to inhibit the migration of epithelium and GBR at the surgical sites. Due to its biodegradability, good biocompatibility, and unique biological properties, gelatin (GT) is considered a suitable candidate for guiding periodontal tissue regeneration. However, GT-based membranes come with limitations, such as poor mechanical strength and mismatched degradation rates. To confront this challenge, a series of GT/poly(4-hydroxybutyrate) (P4HB) composite membranes are fabricated through electrospinning technology. The morphology, composition, wetting properties, mechanical properties, biocompatibility, and in vivo biodegradability of the as-prepared composite membranes are carefully characterized. The results demonstrate that all the membranes present excellent biocompatibility. Moreover, the in vivo degradation rate of the membranes can be manipulated by changing the ratio of GT and P4HB. The results indicate that the optimized GT/P4HB membranes with a high P4HB content (75%) may be suitable for periodontal tissue engineering because of their good mechanical properties and biodegradation rate compatible with tissue growth.

Enhancing mechanical strength, tribological properties, cytocompatibility, osteogenic differentiation, and antibacterial capacity of biodegradable Zn-5RE (RE = Nd, Y, and Ho) alloys for potential bone-implant application

Degradable zinc (Zn) based metals exhibit great promise as potential load-bearing bone-implant materials due to their suitable biodegradability, good fabricate-friendliness, biocompatibility, and favorable osteogenesis-promoting capacity. Nevertheless, most as-cast Zn-based metals display poor mechanical properties due to their coarse grain size and few slip systems, which is challenging to meet bone-implant application requirements. Herein, the alloying using rare earth (RE) elements of neodymium (Nd), yttrium (Y), and holmium (Ho) combined with hot-rolling was used to prepare the hot-rolled (HR) Zn-5RE binary alloys for load-bearing bone fixation or bone repair applications. HR Zn–5Y sample demonstrated the best mechanical properties matching with an ultimate tensile strength of ∼260 MPa, yield strength of ∼200 MPa, elongation of ∼43.5%, strength-elongation product of ∼11.3 GPa%, and macro-hardness of ∼104.7 HB among the HR samples, close to the requirements of mechanical properties for degradable bone-implant materials. HR Zn–5Y sample exhibited the lowest corrosion rate of ∼178 μm/y measured by electrochemical polarization testing, the degradation rate of ∼29 μm/y measured by static immersion testing, and high tribological properties in Hanks’ solution. The diluted Zn–5Y extract showed an appropriate cytocompatibility to 3T3 and MG-63 cells and moderate osteogenic differentiation ability to 3T3 cells among HR Zn-5RE and pure Zn extracts. Meanwhile, the HR Zn–5Y sample showed a suitable and effective antibacterial capacity against S. aureus and E. coli. Overall, the HR Zn–5Y sample is a promising moderate load-bearing bone-implant material for bone pins, plates, and guiding bone regeneration membrane application.

A Periosteum-Bioinspired Electrospun Janus Membrane with Antibacterial and Osteogenic Dual Function.

For a guided bone regeneration membrane, it is critical to possess osteogenic capability while inhibiting infection caused by bacteria. Inspired by the bilayer structure of the native periosteum, an electrospun Janus membrane with osteogenic and antibacterial dual-function is fabricated for guided bone regeneration. Hydrophilic moxifloxacin (MXF) and hydrophobic icariin (ICA) are loaded in the nanofibers made of a mixture of polycaprolactone and gelatin at the top and bottom layers, respectively, leading to the opposing hydrophilic/hydrophobic properties of the bilayer Janus membranes. The as-obtained Janus membrane exhibits excellent physical properties (tensile strength > 6.0MPa) and robust biocompatibility, indicating the immense potential as a suitable replacement for the native periosteum. The membrane has a superior surface morphology and outstanding degradation performance in vitro. Besides, the rapid release of MXF and the slow release of ICA can meet the different needs of drug release rates. Only ≈30% ICA is released from the as-obtained Janus membrane after 21 d while almost 80% MXF is released. Mimicking the bilayer structure of the native periosteum, the electrospun Janus membrane containing ICA and MXF exhibits excellent comprehensive properties, which provides a promising strategy for preparing multifunctional scaffolds for tissue engineering.

Fabrication and characterization of a multi-functional GBR membrane of gelatin-chitosan for osteogenesis and angiogenesis

Guided bone regeneration (GBR) membranes are widely used to treat bone defects. In this study, sequential electrospinning and electrospraying techniques were used to prepare a dual-layer GBR membrane composed of gelatin (Gel) and chitosan (CS) containing simvastatin (Sim)-loaded poly(lactic-co-glycolic acid) (PLGA) microspheres (Sim@PLGA/Gel-CS). As a GBR membrane, Sim@PLGA/Gel-CS could act as a barrier to prevent soft tissue from occupying regions of bone tissue. Furthermore, compared with traditional GBR membranes, Sim@PLGA/Gel-CS played an active role on stimulating osteogenesis and angiogenesis. Determination of the physical, chemical, and biological properties of Sim@PLGA/Gel-CS membranes revealed uniform sizes of the nanofibers and microspheres and appropriate morphologies. Fourier-transform infrared spectroscopy was used to characterize the interactions between Sim@PLGA/Gel-CS molecules and the increase in the number of amide groups in crosslinked membranes. The thermal stability and tensile strength of the membranes increased after N-(3-dimethylaminopropyl)-N9- ethylcarbodiimide/N-hydroxysuccinimide crosslinking. The increased fiber density of the barrier layer decreased fibroblast migration compared with that in the osteogenic layer. Osteogenic function was indicated by the increased alkaline phosphatase activity, calcium deposition, and neovascularization. In conclusion, the multifunctional effects of Sim@PLGA/Gel-CS on the barrier and bone microenvironment were achieved via its dual-layer structure and simvastatin coating. Sim@PLGA/Gel-CS has potential applications in bone tissue regeneration.

Strontium-zinc-based phosphate coatings fabricated in situ on the zinc-pretreated magnesium alloy for degradation control and cytocompatibility enhancement

Owing to the good mechanical support, degradability, and biocompatibility, magnesium (Mg) alloys have large potential in medical applications such as guided bone regeneration membranes. However, the rapid degradation of Mg alloys under physiological conditions hinders many clinical applications. Herein, strontium-zinc-based phosphate (SZP) coatings are fabricated in situ on the zinc (Zn)-electrodeposited WE43 Mg alloy for corrosion protection, degradation control, and cytocompatibility enhancement. The Zn coating acts as a protective cathode for the Mg alloy substrate and provides a stable environment to foster the growth of the SZP coating in comparison with direct deposition onto the Mg alloy surface. The virtues are verified by the smaller corrosion current density, corrosion of the Zn coating instead of the Mg alloy substrate after soaking in artificial saliva, as well as good adhesion provided by the Zn-incorporated transition layer of SrZn2(PO4)2 between the Zn coating and SZP coating. The dense and inert SZP coating mitigates degradation as shown by a decrease in the corrosion current density of 44 times to 0.21 uA cm−2 in the simulated oral environment with artificial saliva. Furthermore, the coating resistance and charge transfer resistance increase by more than one order of magnitude compared to the Zn-treated Mg alloy, and there is no obvious degradation after immersion for 7 days. The Zn coating shows adverse effects on the attachment, spreading, and proliferation of MC3T33-E1 pre-osteoblasts, but the SZP coating providing a higher level larger than 100% of the cell viability after incubation with its extract for 3 days is more compatible with cells because of the retarded dissolution and bio-friendly chemical compositions of SrHPO4 and SrZn2(PO4)2. The hybrid coating has excellent prospects in biomedical products such as biodegradable Mg-based guided bone regeneration membranes.

Fabrication of a Nanoscale Magnesium/Copper Metal-Organic Framework on Zn-Based Guided Bone Generation Membranes for Enhancing Osteogenesis, Angiogenesis, and Bacteriostasis Properties.

Recently, zinc (Zn) and its alloys have demonstrated great potential as guided bone regeneration (GBR) membranes to treat the problems of insufficient alveolar bone volume and long-term osseointegration instability during dental implantology. However, bone regeneration is a complex process consisting of osteogenesis, angiogenesis, and antibacterial function. For now, the in vivo osteogenic performance and antibacterial activity of pure Zn are inadequate, and thus fabricating a platform to endow Zn membranes with multifunctions may be essential to address these issues. In this study, various bimetallic magnesium/copper metal-organic framework (Mg/Cu-MOF) coatings were fabricated and immobilized on pure Zn. The results indicated that the degradation rate and water stability of Mg/Cu-MOF coatings could be regulated by controlling the feeding ratio of Cu2+. As the coating and Zn substrate degraded, an alkaline microenvironment enriched with Zn2+, Mg2+, and Cu2+ was generated. It significantly improved calcium phosphate deposition, differentiation of osteoblasts, and vascularization of endothelial cells in the extracts. Among them, Mg/Cu1 showed the best comprehensive performance. The superior antibacterial activity of Mg/Cu1 was demonstrated in vitro and in vivo, which indicated significantly enhanced bacteriostatic activity against Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli as compared to that of the bare sample. Bimetallic Mg/Cu-MOF coating could properly coordinate the multifunction on a Zn membrane and could be a promising platform for promoting its bone regeneration, which could pave the way for Zn-based materials to be used as barrier membranes in oral clinical trials.

Evaluation and In Vitro Study of an Electrospun Bone Tissue Membrane for Bone Regeneration: A Novel Perspective.

Objectives In the present study, electrospun bone tissue membrane (EBTM) was prepared using polyvinylidene fluoride (PVDF), gelatin (gel), and demineralized bone matrix (DBM) by electrospinning methodfor its potential application in bone tissue regeneration. Materials and methods The preparedEBTMwas evaluated using high-resolution scanning electron microscopy (HR-SEM), energy-dispersive X-ray spectroscopy (EDX; Silicon Drift 2017, USA), thermogravimetric analysis (TGA), and mechanical properties such as tensile strength (MPa), elongation at break (%), flexibility (%), and water absorption (%). In vitro bioactivity testing of EBTM using simulated body fluid (SBF) was performed after 14 days of immersion. Cell viability was tested using human osteoblast-like cells (MG-63) to provebiocompatibility. Results EBTMhad superior surface morphology, thermal stability, and mechanical strength. The mechanical properties of EBTM were promising,enabling its use in tissue engineering. Bioactivity test showed that the EBTM surface developed calcium (Ca) and phosphate (P) after 14 days of being immersed in SBF. Additionally, a biocompatibility investigation revealed that EBTM was covered with more viable cells. Conclusion EBTMwith sufficient mechanical strength, thermal stability, surface morphology, Cadeposition, and biocompatibility could serve as a plausible materialfor bone tissue engineering (skin, ligament, cartilage, and bone).