Bond Strength Of Fiber Posts Research Articles

Comparison of the effect of QMix and conventional root canal irrigants on push-out bond strength of fiber post to root dentin.

ObjectivesThis study aimed to assess the effect of application of QMix and common root canal irrigating solutions on the bond strength of fiber post to root dentin.Material and MethodsIn this in‐vitro study, 60 extracted incisor teeth were decoronated such that 15 mm of root length remained. The canals were prepared with ProTaper rotary system to F5 and filled with gutta‐percha and AH26 sealer. Prior to post placement, the teeth were divided into four groups based on the type of final irrigating solution namely saline, 5.25% NaOCl, 2% chlorhexidine, and QMix. The fiber posts were then cemented with Panavia F2 resin cement. The roots were sectioned perpendicular to their longitudinal axis, and four sections with 1 mm thickness were made at the middle and coronal thirds of the roots. The push‐out bond strength of fiber posts was measured by a universal testing machine in megapascals. Data were analyzed by two‐way ANOVA and Tukey's test.ResultsThe maximum and minimum bond strength values were noted in QMix and NaOCl groups in both the middle and coronal third of the root, respectively. But, there was no significant difference between the push‐out bond strength in the middle or coronal third of the root (p = 0.054). Adhesive failure was the most common mode of failure in all groups.ConclusionUse of QMix for post space irrigation does not compromise the bond strength of fiber post to root dentin, and can be used for final rinsing of the post space.

Photodynamic therapy and gaseous ozone versus conventional post space treatment methods on the push-out bond strength of fiber posts luting with different resin cements

BackgroundThe aim of this study was to compare the push-out bond strength of fiber posts by using two different resin cement after the treatments of post space with photodynamic therapy, gaseous ozone and conventional disinfection solution. MethodsThe root canal treatments of one hundred maxillary incisors were performed. The roots were randomly distributed into 5 groups (n = 20). NaOCl of 2.5% + EDTA of 17% in group 1, CHX of 2% in group 2, toluidine blue + diode laser as the photodynamic therapy (PDT) in group 3 and ozone in group 4 were applied to the post spaces. Group 5 was washed with distilled water as control group. Each group was divided into two subgroups according to the adhesive types and the posts were bonded by using RelyX and LinkForce. The bond strength was calculated using the push-out test method. Resin tag formations were photographed with SEM. The push-out bond strength was analyzed by ANOVA and Tukey tests (p = .05). ResultsThe PDT group, which showed the highest PBS among the groups bonded with LinkForce at all levels, was significantly higher than Ozone and DW groups (p<.05). NaOCl and ozone treatments provided the highest PBS among the groups bonded with RelyX for all levels and this difference was significant according to the DW group (p < .05). ConclusionPost space treatments improved the bond strength of the fiber post ​​in both types of resin cement.

Effect of types of resin cements on the bond strength of fiber post under simulated dives

Background: Changes in barometric pressure conditions that occur during flying and diving under hyperbaric oxygen conditions were found to influence the retention of dental restorations. Aim: This experimental laboratory study aimed to evaluate the bond strength of glass fiber posts after being cemented with self-adhesive resin cement (RelyX™ Unicem, 3M ESPE) and self-etch adhesive resin cement (RelyX™ Ultimate, 3M ESPE) under normal atmospheric pressure and hyperbaric pressure cycles that simulate diving conditions. Methods: A total of 40 extracted, single-rooted mandibular premolars were treated endodontically and randomly divided into two groups according to the cements used for fiber post cementation. Each group was further randomly divided into two equal subgroups that were subjected to normal atmospheric pressure conditions and a simulated hyperbaric condition in a hyperbaric chamber. The pull-out bond strength of fiber posts was tested using a universal testing machine. Data were analyzed using one-way analysis of variance with the Tukey post-hoc test (p&lt;0.05). Results: At normal atmospheric pressure the mean value of the pull-out bond strength of RelyX Ultimate cement was significantly higher than that of RelyX Unicem cement. At hyperbaric pressure condition no significant difference was found between the mean values of the pull-out bond strength of RelyX Ultimate and RelyX Unicem cement. Conclusion: Hyperbaric pressure cycles demonstrated improved pull-out bond strength of glass fiber posts in RelyX Unicem cement but did not have significant effect on pull-out bond strength in RelyX Ultimate cement. Both resin cements have similar pull-out bond strength of glass fibers post after simulated dives.

Effect of Diode Laser irradiation on the Bond Strength of Fiber Posts after Endodontic Retreatment Using Different Sealers.

Purpose: To investigate the effect of diode laser activated irrigation on bond strength between fiber post and radicular dentin after endodontic retreatment using two different sealers. Materials and Methods: Seventy-two extracted human maxillary central incisors were collected, decoronated, endodontically prepared then divided to three groups (n=24) according to sealer type: GP group: gutta-percha without sealer (control group); AD group: AD sealer; and BC group: Bioceramic sealer. Specimens were endodontically retreated after 30 days using the same sealers. 10 mm deep post spaces were prepared in each specimen. Each group was further sub-divided into three subgroups (n=8) according to post space treatment: irrigated with saline (Control), (EDTA) and (laser and EDTA). One tooth from each group was selected for SEM analysis. Posts were cemented, push out tests were performed. Failure modes were analyzed using a digital microscope. Results: With all dentin pretreatment protocols, AD group recorded the highest bond strength mean value followed by GP and BC group respectively, with significant difference (P 0.05). Predominant failure mode was the mixed type as detected by Chi square test. SEM revealed absence of smear layer and opened dentinal tubules after (laser and EDTA) treatment. Conclusions: laser activated irrigation of root dentin significantly improved the bond strength of fiber post after endodontic retreatment with both sealers.

Effect of Calcium Hypochlorite and Sodium Hypochlorite as Root Canal Irrigants on Push-out Bond Strength of Fiber Post Cemented with Etch-and-Rinse Resin Cement: An in Vitro Study.

Objectives: Calcium hypochlorite (CH) has been recently used as a root canal irrigant. The aim of the present study was to compare the effect of CH and sodium hypochlorite (SH), as root canal irrigants, on the push-out bond strength of fiber posts cemented with an etch-and-rinse resin cement. Materials and Methods: In this experimental in-vitro study, 40 human anterior teeth with similar root lengths were randomly divided into five groups (N=8) according to the protocol of root canal irrigation as follows: group 1: saline (control); group 2: 2.5% SH; group 3: 5.25% SH; group 4: 2.5% CH; group 5: 5% CH. Before post placement, the post space was irrigated using the same irrigation protocol, and after that, they were irrigated by distilled water. Fiber posts were cemented with All-Bond 3 bonding and Dou-Link Universal cement. After thermocycling (1000 cycles, 5-55°C), a push-out test was performed, and data were analyzed using one-way analysis of variance and Tukey's post-hoc test with SPSS version 23 (α=0.05). Results: The highest and lowest mean bond strengths were detected in groups 2 and 5, respectively. There was no significant difference between group 1 and the SH groups (P>0.05), but the difference between group 1 and the CH groups was significant (P<0.001). There was a significant difference between SH groups and CH groups (P<0.001). Conclusion: Compared to SH, as a root canal irrigant, CH decreased the push-out bond strength of fiber posts cemented with an etch-and-rinse resin cement.

Effect of Root Dentin Pretreatment on Micro-Push-Out Bond Strength of Fiber Posts to Root Canal Dentin: Cold Atmospheric Argon Plasma (CAAP) and Ethylenediaminetetraacetic Acid (EDTA).

Purpose Debonding from the root canal dentin is the most common failure mode of fiber posts. This study aimed to assess the effects of cold atmospheric argon plasma (CAAP) and ethylenediaminetetraacetic acid (EDTA) on micro-push-out bond strength of fiber posts to root canal dentin. Materials and Methods Forty maxillary canine teeth were decoronated, underwent endodontic treatment, and were stored in an incubator for 7 days. After post space preparation, the teeth were randomly divided into four groups for different surface treatments: (I) saline, (II) 17% EDTA, (III) CAAP, and (IV) 17% EDTA + CAAP. Fiber posts (Whitepost no. 2, FGM) were cemented into the root canals using Panavia F2.0 resin cement, and 1 mm-thick sections were made at the coronal, middle, and apical thirds of the roots. The samples underwent micro-push-out bond strength test. The mode of failure was also determined under a stereomicroscope. Data were analyzed using three-way ANOVA and Tukey's post hoc test (α = 0.05). The mode of failure data were analyzed using the chi-square test. Results The mean micro-push-out bond strength of fiber posts was not significantly different in the four groups (P > 0.05). However, the bond strength values in the coronal third were significantly higher than the corresponding values in the apical third (P=0.01). There was no significant difference in the modes of failure between the groups (P > 0.05). Conclusion Application of CAAP alone or in combination with 17% EDTA could not successfully increase the bond strength of fiber posts to root canal dentin.

Comparison of various irrigation activation procedures after post space preparation on push-out bond strength of fiber posts: an in vitro study

Aim: This study aimed to compare the effectiveness of various irrigation activation methods applied after post space preparation on the push-out bond strengths of fiber posts to root canal dentin. Materials and methods: Twenty maxillary central incisor teeth were prepared and root-filled. Following the preparation of the post spaces, the teeth were randomly allocated to 5 groups (n=4) based on the irrigation activation method. Post spaces were irrigated with 2.5% NaOCl and 17% EDTA and various irrigation activation techniques were applied in each group as follow. Group 1: conventional syringe irrigation (CSI); Group 2: manual-dynamic activation (MDA); Group 3: negative apical pressure (EndoVac); Group 4: passive ultrasonic irrigation (PUI) and Group 5: Er,Cr:YSGG laser. Subsequent to fiber post placement, the samples were transversally sectioned and push-out tests were applied for measurement of the bond strength of fiber posts. Results: Irrigation activation with Er,Cr:YSGG laser, EndoVac and PUI resulted higher push-out bond strength in comparison to MDA and CSI (P<.05). Conclusions: Irrigation activation with EndoVac, PUI and Er,Cr:YSGG laser provides superior bonding strength for fiber posts. gth for fiber posts.

The effect of two endodontic sealers and interval before post-preparation and cementation on the bond strength of fiber posts.

To evaluate the effect of different endodontic sealers (epoxy resin-based and bioceramic-based) and the time of post-cementation on the bond strength of a fiber post cemented with resin cement. Forty human premolars were instrumented and divided into 4 groups. According to the type of sealer and the time of post-cementation: AH-IM (AH Plus, post-cemented immediately after root canal treatment), SP-IM (iRoot SP, post-cemented immediately after root canal treatment), AH-OW (AH Plus, post-cementation after one week), and SP-OW (iRoot SP, post-cementation after one week). In each group, the samples were submitted to push-out test, and failure mode was assessed. Levene's test, one-way ANOVA, and Kruskal-Wallis analysis were applied for statistical analysis (α = 5%). The highest mean push-out bond strength was obtained from the SP-IM group in the apical part (10.45 ± 5.15MPa), while the lowest was observed in samples from the AH-OW group in the middle part (2.63 ± 1.54 MPa). One-way ANOVA showed that within the same root region, the time of post-cementation had a negative influence on the bonding strength in the SP groups in the middle and apical portion (P<0.05), however, when comparing the effect of type of sealers on bonding strength between the OW groups or IM groups within the same root region, no significant difference was observed regardless of the post cementation time (P>0.05). The bond strength of the fiber post was higher when the post was cemented immediately after root canal treatment when the bioceramic sealer was applied. The correct choice of an endodontic sealer and the proper time of post-cementation may help to obtain the best quality of post-and-core restoration.

The effects of root canal perforation repair materials on the bond strength of fiber posts.

This study aimed to evaluate the effect of calcium hydroxide and bioceramics used in perforation repair on the bonding strength of fiber posts via a push-out test. This study used 106 extracted single-rooted human mandibular premolar teeth. Root canal preparations were performed with a rotary file system and perforations were created in the middle third of each tooth. The samples were randomized into two main experimental groups, one with calcium hydroxide and one without. Each group had four subgroups in which different bioceramic cements were applied (n = 11) and a control group (n = 9). The root canals perforations were repaired using MTA, Biodentine, Bioaggregate, and Endosequence BC root repair material. A fiber post was applied to each tooth and a push-out test was performed. The samples were examined at 40× magnification with a digital microscope in order to identify fracture type. Bonding strength was calculated in MPa. A statistical analysis showed that the calcium hydroxide had no effect on the bonding strength of the fiber posts. A comparison of the perforation repair materials revealed that Biodentine in the calcium hydroxide group and Bioaggregate in both groups decreased the bonding strength compared to the other materials (p < 0.05). The most common failure type was adhesive failure between the dentin and resin cement (38.16%). The use of different perforation repair materials can affect the bonding strength of fiber posts. Therefore, the choice of perforation repair material should be made on an individual basis.

Bond strength according to the moment of fiber post cutting fixed with self-adhesive cement to the root dentin.

BackgroundThe fiber posts require a cut in the coronal portion to adjust it to the available clinical space. The cutting of posts cemented may generate tension via bur vibrations of drill on the bonding interface, with the possibility of decreasing the bond strength. Thus, this study aimed to evaluate if the moment of cutting the fiber posts has an effect on its bond strength when fixed with self-adhesive resin cement. Material and MethodsThirty-six bovine teeth were randomly divided into three groups after endodontic treatment and post space preparation (n = 12): IAC- the fiber posts were cutting immediately after cementation; ACR - the fiber posts were cutting after coronal reconstruction with resin; Control - the fiber posts were not cut. The fiber posts were cemented with self-adhesive cement (RelyX U200 - 3M ESPE). After 24 h, the teeth were sectioned perpendicularly and the push-out test was performed in a universal testing machine at a speed of 0.5 mm/min, until failure. Data were analyzed using two-way ANOVA and Tukey’s post-hoc test. ResultsThe effect of moment of fiber posts cutting (p = 0.44) and the interaction between the factors moment of post cutting and third root (p = 0.81) had no significant. The root third factor showed a significant effect (p = 0.01). The bond strength in the apical third was significantly lower than in the middle (p = 0.00) and coronal (p = 0.01) thirds. ConclusionsThe moment of post cutting has no effect on the bond strength of fiber posts fixed with self-adhesive cement to the root canal. Key words:Fiber post, self-adhesive resin cement, push-out bond strength, operative dentistry.

Effect of ultrasonic activation of the adhesive system on dentin tubule penetration and the pushout bond strength of fiber posts

Statement of problemWhether ultrasonic activation of the adhesive system improves dentin tubule penetration and the bond strength of fiber posts to root dentin is unclear. PurposeThe purpose of this in vitro study was to evaluate the effect of ultrasonic activation of 2 adhesive systems (etch-and-rinse and self-etch) and 1 glass ionomer cement on the dentin tubule penetration and pushout bond strength of fiber posts to root dentin. Material and methodsSixty maxillary central incisors were endodontically treated and divided into 6 groups (n=10) as per the post cementation strategy: etch-and-rinse, etch-and-rinse and ultrasonic, self-etch, self-etch and ultrasonic, glass ionomer cement, and glass ionomer cement and ultrasonic. The primers, the adhesives, and the glass ionomer cement were activated for 20 seconds each, and the fiber posts were cemented with a resin cement. Dentin tubule penetration was evaluated by confocal laser scanning microscopy and the pushout bond strength measured at 3 post locations: cervical, middle, and apical. The failure patterns were also described after pushout testing. ResultsSelf-etch and ultrasonic showed higher dentin tubule penetration than the other cementation strategies (P<.05) and improved the bond strength values (P<.05), which were higher than etch-and-rinse and ultrasonic and glass ionomer cement and ultrasonic (P<.05). Adhesive failures at the cement and dentin interface were predominant in the etch-and-rinse, self-etch, and self-etch and ultrasonic groups. ConclusionsUltrasonic activation improved the dentin tubule penetration of a self-etch adhesive system. The bond strength of fiber posts cemented with a self-etch adhesive system and a resin cement was improved after ultrasonic activation.

The influence of different treatments on fiber post and root canal to bond strength of fiber post

Different methods were used to treat the fiber posts and root canals, and evaluated their influence on the bond strength of fiber posts. After thirty extracted human, single-rooted premolars were endodontically treated and post space was prepared in each tooth with post drills, they were randomly assigned into nine groups with 33 fiber glass posts. Different treatment methods for fiber posts and root canals were applied. Following post cementation, slice specimens were prepared. The push-out test was performed using a universal testing machine, and the failure modes were examined with a stereomicroscope. Bond strengths (mean ± SD) were: CC group (7.07 ± 1.51 MPa); CE group (10.57 ± 2.90 MPa); CM group (10.06 ± 3.00 MPa); SiC group (7.23 ± 2.06 MPa); SiE group (10.51 ± 2.26 MPa); SiM group (10.50 ± 2.70 MPa); PC group (9.79 ± 2.79 MPa); PE group (11.70 ± 1.76 MPa); PM group (11.06 ± 3.17 MPa). The bond strength of polydopamine group was significantly higher than silane group and control group (p < 0.05). NaClO/EDTA group had higher bond strength than the MTAD group, and both were higher than the control group (p < 0.05). Combined treatment of fiber post and root canal was more advantageous to improve the bond strength between fiber post and root canal. Surface polydopamine functionalization was confirmed to be a reliable method for improving the bond strength of fiber posts. The effect of 5.25% NaClO + 17% EDTA solution on the bond strength is more significant than MTAD solution. When the fiber posts were treated with PDA and the root canals were treated with NaClO/EDTA, the best bond strength can be obtained. In this experiment, fiber posts and root canals were treated separately. The aim of this paper is to explore the influence of different treatment methods on the bond strength of fiber posts, in order to screen out the most effective processing methods and provide theoretical guidance for the clinical application.

Impact of photodynamic therapy on the push-out bond strength of fiber posts to root dentin: A systematic review and meta-analysis.

This systematic review documents the up-to-date evidence on the efficacy of photodynamic therapy (PDT) on the push-out bond strength of fiber posts cemented to root dentin. The focused PICO question was: "What impact does PDT have on the push-out bond strength of fiber posts cemented to root dentin?" This systematic review followed the guidelines and recommendations reported in the Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA) guidelines chart. An electronic search was performed in MEDLINE/PubMed, SCOPUS, Web of Science, and Embase from January 1980 up to and including January 2020. Heterogeneity was calculated for push-out bond strength by means of the Chi-square test and I2 statistics. For meta-analyses, if the I2 was higher than 50 %, a random effects model was used, otherwise a fixed effects model for I2 ≤50 % was applied. A p-value <0.05 was set for significant heterogeneity. Forest plots were computed reporting standard mean differences (SMD) of outcomes and 95 % confidence intervals (CI). In total, ten studies were included, all of wich demonstrated medium risk of bias. All studies tested the push-out bond strength by means of a universal testing machine with applying a load ranging between 0.5 and 1 mm/min speed. Of the 10 studies, nine (90 %) indicated that PDT had no effect on push-out bond strength of fiber posts to root dentin. Only one study indicated that PDT significantly improved the bond strength when compared with other control groups. The overall mean difference for push out bond strength showed no statistically significant difference between PDT and the control group (SMD = -1.11 [-3.25, 1.02], Z=-1.02, p = 0.305). This systematic review concludes that PDT has no effect on improving the push-out bond strength of fiber posts to root dentin.

Effect of Silver Antibacterial Agents on Bond Strength of Fiber Posts to Root Dentin.

This study was conducted to evaluate whether antibacterial pretreatment irrigation with silver nanoparticles (SNPs) and silver diamine fluoride (SDF) has any effect on bond strength of fiber posts cemented with three types of resin cements in root canal space. Fifty-four endodontically treated maxillary central incisor roots were prepared for fiber post (FRC Postec Plus NO.3, Ivoclar Vivadent) cementation and divided into nine groups in terms of three cement types and two pretreatments with silver antibacterial agents. The cements were as follows: an etch-and-rinse cement (ER, Excite DSC/Variolink N), a self-etch cement (SE, ED Primer/Panavia F2.0), and a self-adhesive cement (SA, Panavia SA Luting Plus). For each cement, the control group was with no treatment and two experimental groups were with SNPs and SDF treatments that were used after acid-etching for ER cement and after EDTA treatment for SE and SA cements. After fiber post cementation, each bonded root was horizontally sectioned into 1-mm thickness microslices to create two slices for each root region (apical, middle and coronal) and underwent push-out bond strength (PBS) test. Data in MPa were analyzed with two-way ANOVA and Tukey test (p=0.05). The interaction of the pretreatment type and cement type was significant (p<0.001). SNPs and SDF significantly increased PBS with ER cement (p≤0.04). This positive effect was also marginally significant for SDF with SE cement (p=0.049). For SA cement, SNPs showed a significant positive effect, but SDF had a significant adverse effect on PBS (p<0.001). The effect of pretreatment with silver antibacterial agents prior to adhesive cementation of fiber posts depends on the resin cement used. Contrary to SNPs with beneficial or no significant effect on bonding for all cements, SDF exhibited a deleterious effect with self-adhesive cement.

Photodynamic activation of irrigation (using different laser prototypes) on push out bond strength of fiber posts.

To evaluate the influence of photodynamic therapy (PDT) and light activated irrigation (LAI) using different laser prototypes Er,Cr:YSGG (ECYL), Er:Yag (EYL), Nd-Yag (NYL) on pushout bond strength of Pre-fabricated fiber reinforced composite (PFRC) post to radicular dentin. Fifty maxillary and mandibular teeth were collected, cleaned and decoronated. Canals were instrumented using crown-down technique. Flaring of canals was performed using protaper S1, SX files. F1, F2 and F3 files were utilized for finishing of canal preparations. Prepared root canals were dried and obturated with gutta percha. Teeth were placed vertically within the section of polyvinyl pipes using acrylic resin. Post space preparation was completed using peso-reamers. Based on the PDT and laser activated irrigation (LAI) with different laser prototypes, samples were divided into five groups of 10 specimens each. Group 1- PDT, group 2-5.25 % NaOCl (sodium hypochlorite) and 17 % EDTA (ethylene diamine tetra acetic acid), group 3-5.25 % NaOCl with 17 % EDTA and NYL, group 4-5.25 % NaOCl with 17 % EDTA and EYL ; and group 5-5.25 % NaOCl +17 % EDTA and ECYL. Fiber post were luted in root canals with self-etch dual cure cement and teeth were sectioned at three levels (apical, middle and coronal). Push-out test was performed by placing the specimens in universal testing machine. Failure analysis of debonded surfaces was evaluated using stereomicroscope at 40× magnification. Means and standard deviations of push out bond strength were assessed by one-way analysis of variance (ANOVA). Comparison between means of push out bond strength was evaluated using Tukey multiple comparison tests (p = 0.05). The highest push out bond strength was observed in group 5 at all three levels, coronal (10.08 ± 0.74 MPa), middle (8.95 ± 0.94 MPa) and apical (6.00 ± 0.88 MPa). The lowest push out bond strength was demonstrated by group 2 at all levels, coronal (6.15 ± 1.22 MPa), middle (5.65 ± 0.95 MPa) and apical (2.25 ± 0.55 MPa). Intra-group comparison showed decrease in push out bond strength in the coronal to apical direction among all investigated groups. Inter-group comparison exhibited comparable push out bond strength at all three levels of root for group 1 and group 2 specimens (p > 0.05). LAI with different laser prototypes improved push out bond values of PFRC post to root dentin as an adjunct to NaOCl and EDTA treatment. PDT improved push out strength compared to conventional canal cleaning regime.

Effect of ultrasonic cleaning on the bond strength of fiber posts in oval canals filled with a premixed bioceramic root canal sealer.

ObjectiveThis study aimed to evaluate the effect of ultrasonic cleaning of the intracanal post space on the bond strength of fiber posts in oval canals filled with a premixed bioceramic (Bio-C Sealer [BIOC]) root canal sealer.Materials and MethodsFifty premolars were endodontically prepared and divided into 5 groups (n = 10), based on the type of root canal filling material used and the post space cleaning protocol. A1: gutta-percha + AH Plus (AHP) and post space preparation with ultrasonic cleaning, A2: gutta-percha + BIOC and post space preparation with ultrasonic cleaning, B1: gutta-percha + AHP and post space preparation, B2: gutta-percha + BIOC and post space preparation, C: control group. Fiber posts were cemented with a self-adhesive luting material, and 1 mm thick slices were sectioned from the middle and cervical third to evaluate the remaining filling material microscopically. The samples were subjected to a push-out test to analyze the bond strength of the fiber post, and the results were analyzed with the Shapiro-Wilk, Bonferroni, Kruskal-Wallis, and Mann-Whitney tests (p < 0.05). Failure modes were evaluated using optical microscopy.ResultsThe results showed that the fiber posts cemented in canals sealed with BIOC had lower bond strength than those sealed with AHP. The ultrasonic cleaning of the post space improved the bond strength of fiber posts in canals sealed with AHP, but not with BIOC.ConclusionsBIOC decreased the bond strength of fiber posts in oval canals, regardless of ultrasonic cleaning.

Influence of irrigating solutions and post luting on bond strength of fiber posts after aging

Abstract Aim: The study aimed to evaluate the influence of irrigating solutions on bond strength (BS) of fiber posts using different luting systems after aging. Methods: Bovine teeth (n = 96) were randomly (8 groups, n = 12), sectioned, endodontically treated and root canals were prepared. The 96 bovine teeth were divided into four groups according to luting systems as conventional light-cure (RelyX ARC), self-adhesive (RelyX U200 and Panavia F), dual - cure self - etch, and self - adhesive (SeT PP). Each of the four groups was further divided into two subgroups using 2% chlorhexidine (CHX) gel or 5.25% sodium hypochlorite (NaOCl) as the irrigating solution. After post cementation, the metal-ceramic crowns were positioned. After 48 h, all samples were submitted to 1,000,000 thermal cycles. After water storage, push-out test was performed. The data were analyzed using two-way ANOVA and Tukey’s test (P = 0.05). Results: CHX gel BS means were statistically higher than NaOCl means when posts were cemented with the conventional or dual-cure self-etch and self-adhesive resin cements; no significant statistical differences were observed between groups CHX gel or NaOCl treatments for the dual-cure self-adhesive resin cements. Conclusion: The irrigation solution used on endodontic treatment before luting procedures with conventional or dual-cure self-etch and self-adhesive resin cements of glass fiber posts improved long-term BS after aging.

Endodontic sealers and post-endodontic waiting time affect the bond strength of the fiber posts

Abstract Introduction The resistance adhesive of a fiber post can be affected by several factors, such as the endodontic sealer and post-endodontic waiting time. Objective The aim of this study was to evaluate the effect of different endodontic sealers and two different post-endodontic waiting times on the bond strength of fiber posts. Material and method Seventy-two bovine teeth were endodontically treated and filled using three endodontic sealers: eugenol-based, epoxy resin-based, or mineral trioxide aggregate-based. The specimens were stored at 37°C for 24 hours or for 30 months. After the respective storage times, the root canals were prepared for luting fiber posts using RelyX U200. Push-out tests and analysis of failures were performed. The push-out data were analyzed by two-way analysis of variance to compare the effects of the endodontic sealer and with the t-test to compare the effects of post-endodontic waiting time. Result The AH Plus sealer yielded the highest bond strength values at 30 months post-endodontics (11.26 Mpa) (p &lt; 0.05), however no had difference with Endofill sealer at the same time. Endofill and MTA Fillapex sealers did not differ significantly in their effects, irrespective of the post-endodontic waiting time. Conclusion In conclusion, the endodontic sealer used and post-endodontic waiting time affect the adhesive resistance of fiber posts. The adhesion increases significantly when the fiber post is cemented 30 months after the root canal filling, while the adhesion is reduced when cementing immediately after root canal treatment, in particular for eugenol-based endodontic sealers.

The effect of silver nanoparticles, zinc oxide nanoparticles, and titanium dioxide nanoparticles on the push-out bond strength of fiber posts

BackgroundThis study was undertaken to investigate the effect of intraradicular dentin pretreatment with silver nanoparticles (SNPs), zinc oxide nanoparticles (ZNPs), and titanium oxide nanoparticles (TNPs) on the push-out bond strength (PBS) of fiber posts to root dentin using two types of resin cements. Material and MethodsEighty single-rooted human premolar roots were randomly divided into eight groups after endodontic treatment and post space preparation, according to the type of intraradicular dentin pretreatment with different nanoparticle solutions (n=20). The groups included no pretreatment (control) and pretreatments with SNPs, ZNPs, and TNPs. Each group was divided into 2 subgroups (n=10) according to cementation: Excite DSC/Variolink II and ED Primer II/Panavia F2.0. The PBS values were measured in different areas of the post space. The data were subjected to the three-way analysis of variance and Tukey tests (p=0.05). ResultsThe SNP-pretreated groups showed significantly higher PBS values than the other groups. No significant differences in PBS were noted among the control, ZNP-pretreated, and TNP-pretreated groups. There was no significant difference in the PBS of the fiber posts with respect to cement type. The PBS was significantly lower in the apical region than in the other two regions. There was no statistically significant difference between the PBSs of the cervical and middle thirds. ConclusionsIntraradicular dentin pretreatment with SNPs, TNPs, and ZNPs did not interfere with the PBS of the fiber posts. The best result was obtained for the SNP-pretreated groups for both types of cement. Also, the lowest PBS was found in the apical third of the root canal spaces. Key words:Fiber post, nanoparticles, push-out bond strength.

Evaluation of modified micro-push-out bond strength of glass fiber posts with chemically treated resin cements

To evaluate the modified micro-push-out bond strengths of prefabricated glass fiber posts with silaneafter 35% phosphoric acid to resin cements. In the study, 40 glass fiber posts were randomly divided into 2 groups (20 posts in each group) for different surface treatments. Group 1, treated with silaneafter 35% phosphoric acid; group 2, no surface treatment (Control group). Then each group was randomly divided into 2 minor groups (modified group and traditional group), with each group with 10. So the four groups were group 1M (phosphoric acid + silane-modified), group 1T (phosphoric acid + silane-traditional), group 2M (control-modified), and group 2T (control-traditional). A modified micro-push-out bond strength test method was used in modified groups. In traditional groups, the 20 extracted human, single-rooted teeth were endodontically treated. Gutta-percha was removed with #1-2 Peeso Reamers (Mani), and the post space of each specimen was enlarged with a standard drill system from the corresponding fiber post system to create a 9 mm post space with at least 4 mm of filling material in the root apex. Following post cementation according to the manufacturer's instructions, the traditional micro-push-out bond strengths were tested using a universal testing machine(0.5 mm/min). Both failure modes were examined with a stereomicroscope. The data of the four groups were statistically analyzed using the one-way ANOVA test(α= 0.05). The bond strengths were (18.85±1.42) MPa for group 1M, (19.39±1.35) MPa for group 1T, (11.26±1.57) MPa for group 2M, and (11.27±1.83) MPa for group 2T. The bond strength of Group 1 was significantly higher than that of group 2(P<0.05), no matter which method was used. The fracture mode 100% in group M was the destruction of the post/resin interface, compared with 65.7% in group T. In contrasted to the traditional micro-push-out test, the modified test can evaluate the bond strength of fiber post to resin cement more effectively, and 35% phosphate acid + silane treatment can improve the bonding strength.