Bond Oxidation Reactions Research Articles

Diverse Catalytic Applications of Phosphine Oxide‐Based Metal Complexes

AbstractPhosphine oxides are an interesting class of compounds possessing tetracoordinate and pentavalent phosphorus atoms and have been employed in a wide range of applications including reagents in organic synthesis, metal extractants, flame retardants, pharmaceuticals, and bioactivity studies. Among all, the degree of basicity of phosphoryl oxygen driven by the nature of substituents influences the electronic properties of the central metal in a complex toward the diversified catalytic processes. Further, the presence of heteroatoms adjacent to the central phosphorus atom enhances the nucleophilicity of the phosphoryl oxygen atom. In view of this, the present review covers the past two decades of remarkable catalytic versatility of P=O‐based metal complexes and describes the governing factors influencing the structural properties and the resultant coordination behavior. Interestingly, some of the P=O bond distances of metal complexes are either longer or shorter compared to their free ligands, indicating the catalytic activity. These complexes can effectively catalyze a wide range of chemical reactions including polymerizations, C−C and Si−C bond activations, oxidation, reduction, hydroformylation, hydrophosphination, hydrogenation and cyclization reactions. Furthermore, this review emphasizes the impact of substituents, solvents, additives, light, and temperature on the catalytic efficiency.

Degradation of tris(1,3-dichloro-2-propyl) phosphate (TDCPP) by ultraviolet activated hydrogen peroxide: Mechanisms, pathways and toxicity assessments

The ubiquity and ecotoxicity of tri (1,3-dichloro-2-propyl) phosphate (TDCPP) in aquatic environments make it essential to develop efficient related treatment techniques. The present research aims to systematically explore the mechanisms and toxicity changes of TDCPP degradation through UV-driven hydrogen peroxide process (UV/H2O2). The results revealed degradation efficiency of TDCPP attained 95 % with 0.5 mM H2O2, corresponding to a reaction rate constant (k) of 0.04919 min−1. Furthermore, three typical chlorinated OPEs (Cl-OPEs) were simultaneously degraded by the UV/H2O2 process, with different degradation efficiencies, according to the following order: TCEP<TDCPP<TCPP. The degradation efficiency was restricted under alkaline condition and the presence of humic acid (HA), nitrate (NO3–), chloride (Cl-), sulfate (SO42-), and dihydrogen phosphate (H2PO4-). A total of 12 intermediates were identified, which were generated through different pathways, including bond breaking, hydroxylation, and oxidation reactions. The Toxicity Estimation Software Tool (T.E.S.T) results demonstrated stronger mutagenicity and developmental toxicity of the TDCPP intermediates than parent compound. According to RNA sequencing results, UV/H2O2-based TDCPP degradation for 20 min and 60 min still had negative effects on Escherichia coli (E. coli). Indeed, the Gene Ontology (GO) enrichment and Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis results further suggested the stronger negative effect (e.g., damaging effects on the cell membrane, energy metabolism, and vitality) of the 20-min oxidation solution on E. coli, followed by those observed in without treatment and 60-min oxidation solution. Therefore, longer oxidation times are required in the UV/H2O2 process to decrease the toxicity of TDCPP.

C-H Bond Oxidation by MnIV-Oxo Complexes: Hydrogen-Atom Tunneling and Multistate Reactivity.

The reactivity of six MnIV-oxo complexes in C-H bond oxidation has been examined using a combination of kinetic experiments and computational methods. Variable-temperature studies of the oxidation of 9,10-dihydroanthracene (DHA) and ethylbenzene by these MnIV-oxo complexes yielded activation parameters suitable for evaluating electronic structure computations. Complementary kinetic experiments of the oxidation of deuterated DHA provided evidence for hydrogen-atom tunneling in C-H bond oxidation for all MnIV-oxo complexes. These results are in accordance with the Bell model, where tunneling occurs near the top of the transition-state barrier. Density functional theory (DFT) and DLPNO-CCSD(T1) computations were performed for three of the six MnIV-oxo complexes to probe a previously predicted multistate reactivity model. The DFT computations predicted a thermal crossing from the 4B1 ground state to a 4E state along the C-H bond oxidation reaction coordinate. DLPNO-CCSD(T1) calculations further confirm that the 4E transition state offers a lower energy barrier, reinforcing the multistate reactivity model for these complexes. We discuss how this multistate model can be reconciled with recent computations that revealed that the kinetics of C-H bond oxidation by this set of MnIV-oxo complexes can be well-predicted on the basis of the thermodynamic driving force for these reactions.

Bioinformatic Discovery of a Cambialistic Monooxygenase.

Dinuclear monooxygenases mediate challenging C-H bond oxidation reactions throughout nature. Many of these enzymes are presumed to exclusively utilize diiron cofactors. Herein we report the bioinformatic discovery of an orphan dinuclear monooxygenase that preferentially utilizes a heterobimetallic manganese-iron (Mn/Fe) cofactor to mediate an O2-dependent C-H bond hydroxylation reaction. Unlike the structurally similar Mn/Fe-dependent monooxygenase AibH2, the diiron form of this enzyme (SfbO) exhibits a nascent enzymatic activity. This behavior raises the possibility that many other dinuclear monooxygenases may be endowed with the capacity to harness cofactors with a variable metal content.

Efficient visible-light photocatalysis of chloramphenicol using novel engineered biochar-based Ti-doped Bi2WO6 composite: Mechanisms, degradation pathways, and applications

A novel engineered biochar (ACB)-based Ti-doped Bi2WO6 composite (Ti-Bi2WO6@ACB) was synthesized via a one-step hydrothermal reaction for the efficient degradation of chloramphenicol (CAP) and extensive environmental applications. Multiple characterization techniques, CAP degradation effects, total organic carbon (TOC) removal, effects of environmental factors, recycling tests, actual wastewater treatment, enhancement strategies, and disinfection effects were systematically evaluated. It was found that Ti-Bi2WO6@ACB is a Ti3+ self-doped TiO2/Bi2WO6/ACB ternary heterogeneous photocatalyst. The introduction of ACB and Ti doping enhanced the elemental composition, oxygen-containing functional groups, defect structure (oxygen vacancies), visible-light absorption, and active sites. Moreover, Ti-Bi2WO6@ACB effectively inhibited the recombination of photogenerated carriers. The removal efficiency of Ti-Bi2WO6@ACB for 50 mg⋅L−1 CAP was 92.44 % at 120 min of irradiation, and the TOC removal rate was 67.72 %, which was significantly higher than that of the control treatment. Ti-Bi2WO6@ACB is reusable and photostable, with approximately 99 % sterilization of Staphylococcus aureus and Escherichia coli within 10 min of light irradiation and 48 h of cultivation. The addition of H2O2, ultrasonication, heating, and blowing air in the system improved the photocatalytic efficiency. The ultrasound enhancement mechanisms are related to the effects of cavitation, microjets, and photocatalysis coupled with sonocatalysis. CAP degradation was dominated by OH, O2−, and h+. The doping of Ti3+/TiO2 generated more defects and O2−, and the ACB acted as a carrier to prevent the agglomeration of TiO2 and Bi2WO6. Further, the degradation process of CAP was documented and the degradation pathways may include hydroxylation addition, methanol denaturation, substitution, C–N bond breaking, oxidation, hydrolysis, and decarboxylation reactions. The research presents fresh insights into the development of high-performance engineered biochar-based composite for environmental detoxification.

Solid‐Supported Catalysts for Organic Functional Group Transformations

AbstractDesign of solid‐supported metal catalysts (SSMCs) has made an increasingly important contribution to heterogeneous catalysis in terms of fundamental understanding and technological applications. For instance, industrial use of supported catalysts for oxidation, reduction, and C−C bond formation reactions is highly prevalent. The reason behind this is that such catalysts are economical, have high thermal stability, dispersion, high exposed surface area, and above all, high reusability (up to multiple subsequent cycles). Such characteristics make supported catalysts ideal for green synthesis. However, unlike homogeneous catalysis, heterogeneous catalysis is widely applied in crude oil refining, the pharmaceutical industry, water purification, natural product synthesis, and environmental catalysis. Carbon‐carbon bond formation reactions are frequently used in the organic synthesis using SSMCs. SSMCs are attractive to synthetic chemists due to their easy recovery and excellent stability compared to unsupported metal catalysts. However, the major drawback of SSMCs is related to metal sintering at elevated temperatures caused by weak interactions between the metal and solid support in SSMCs. This review highlights major advancements in SSMCs. Three commonly reported solid supports for metal catalysts, such metal oxides, carbonaceous materials, and polymeric compounds, are discussed. Moreover, a series of thermo‐ and photocatalyzed reactions, such as hydrogenation, carbon‐carbon bond formation, oxidation reactions and multicomponent reactions and the effect of variable supports towards activity and selectivity are demonstrated.

Mechanistic Details of the Pd-catalyzed and MPAA Ligand-Enabled β-C(sp3)-H Acetoxylation of Free Carboxylic Acid.

Transition metal-catalyzed C-H bond oxidation of free carboxylic acid stands as an economic, selective, and efficient strategy to generate lactones, hydroxylated products, and acetoxylated products and attracts much of the chemists' attention. Herein, we performed a density functional theory study on the mechanism and selectivity in Pd-catalyzed and MPAA ligand-enabled C-H bond acetoxylation reaction. It was found that the ligand, base, and substrate are important in determining the reaction mechanism and the selectivity. The acetic anhydride additive is critical in leading the reaction to be acetoxylation, instead of the lactonization, through a facile σ-bond metathesis mechanism that leads to the Pd-OAc in-termediate. Our study sheds light on the further development of transition metal-catalyzed C-H bond oxidation reactions.

Experimental Demonstration and Density Functional Theory Mechanistic Analysis of Arene C-H Bond Oxidation and Product Protection by Osmium Tetroxide in a Strongly Basic/Nucleophilic Solvent.

Reactions that result in the oxy-functionalization of sp2 C-H bonds to give phenols are relatively rare. Here we report experiments and density functional theory (DFT) calculations that demonstrate selective C-H bond hydroxylation of nitroarenes to their corresponding mono-phenoxide as the exclusive product using OsO4 in a highly basic solvent mixture of water, hydroxide, and pyridine. DFT calculations using a mixed explicit/continuum solvent approach indicate that there is likely a mixture of OsO4-hydroxide/pyridine ground-state structures that have competitive reactivity and that the mechanism involves the nucleophilic addition of an anionic metal-oxo species to the arene followed by a hydride transfer process that is different from the standard [3 + 2] mechanism often invoked for the OsO4 oxidation of σ and π bonds. This work demonstrates the utility of using a strongly basic solvent for C-H bond oxidation reactions as this effectively converts any reactive phenolic product into the corresponding phenoxide, which is protected and essentially inert to further oxidation by the nucleophilic metal-oxo species.

A Pseudotetrahedral Terminal Oxoiron(IV) Complex: Mechanistic Promiscuity in C-H Bond Oxidation Reactions.

S=2 oxoiron(IV) species act as reactive intermediates in the catalytic cycle of nonheme iron oxygenases. The few available synthetic S=2 FeIV=O complexes known to date are often limited to trigonal bipyramidal and very rarely to octahedral geometries. Herein we describe the generation and characterization of an S=2 pseudotetrahedral FeIV=O complex 2 supported by the sterically demanding 1,4,7‐tri‐tert‐butyl‐1,4,7‐triazacyclononane ligand. Complex 2 is a very potent oxidant in hydrogen atom abstraction (HAA) reactions with large non‐classical deuterium kinetic isotope effects, suggesting hydrogen tunneling contributions. For sterically encumbered substrates, direct HAA is impeded and an alternative oxidative asynchronous proton‐coupled electron transfer mechanism prevails, which is unique within the nonheme oxoiron community. The high reactivity and the similar spectroscopic parameters make 2 one of the best electronic and functional models for a biological oxoiron(IV) intermediate of taurine dioxygenase (TauD‐J).

Crystal Structure and C-H Bond-Cleaving Reactivity of a Mononuclear CoIV-Dinitrate Complex.

High-valent FeIV═O intermediates with a terminal metal-oxo moiety are key oxidants in many enzymatic and synthetic C-H bond oxidation reactions. While generating stable metal-oxo species for late transition metals remains synthetically challenging, notably, a number of high-valent non-oxo-metal species of late transition metals have been recently described as strong oxidants that activate C-H bonds. In this work, we obtained an unprecedented mononuclear CoIV-dinitrate complex (2) upon one-electron oxidation of its Co(III) precursor supported by a tridentate dianionic N3 ligand. 2 was structurally characterized by X-ray crystallography, showing a square pyramidal geometry with two coordinated nitrate anions. Furthermore, characterization of 2 using combined spectroscopic and computational methods revealed that 2 is a low-spin (S = 1/2) Co(IV) species with the unpaired electron located on the cobalt dz2 orbital, which is well positioned for substrate oxidations. Indeed, while having a high thermal stability, 2 is able to cleave sp3 C-H bonds up to 87 kcal/mol to afford rate constants and kinetic isotope effects (KIEs) of 2-6 that are comparable to other high-valent metal oxidants. The ability to oxidize strong C-H bonds has yet to be observed for CoIV-O and CoIII═O species previously reported. Therefore, 2 represents the first high-valent Co(IV) species that is both structurally characterized by X-ray crystallography and capable of activating strong C-H bonds.

Concerted proton-electron transfer reactions of manganese-hydroxo and manganese-oxo complexes.

The enzymes manganese superoxide dismutase and manganese lipoxygenase use MnIII-hydroxo centres to mediate proton-coupled electron transfer (PCET) reactions with substrate. As manganese is earth-abundant and inexpensive, manganese catalysts are of interest for synthetic applications. Recent years have seen exciting reports of enantioselective C-H bond oxidation by Mn catalysts supported by aminopyridyl ligands. Such catalysts offer economic and environmentally-friendly alternatives to conventional reagents and catalysts. Mechanistic studies of synthetic catalysts highlight the role of Mn-oxo motifs in attacking substrate C-H bonds, presumably by a concerted proton-electron transfer (CPET) step. (CPET is a sub-class of PCET, where the proton and electron are transferred in the same step.) Knowledge of geometric and electronic influences for CPET reactions of Mn-hydroxo and Mn-oxo adducts enhances our understanding of biological and synthetic manganese centers and informs the design of new catalysts. In this Feature article, we describe kinetic, spectroscopic, and computational studies of MnIII-hydroxo and MnIV-oxo complexes that provide insight into the basis for the CPET reactivity of these species. Systematic perturbations of the ligand environment around MnIII-hydroxo and MnIV-oxo motifs permit elucidation of structure-activity relationships. For MnIII-hydroxo centers, electron-deficient ligands enhance oxidative reactivity. However, ligand perturbations have competing consequences, as changes in the MnIII/II potential, which represents the electron-transfer component for CPET, is offset by compensating changes in the pKa of the MnII-aqua product, which represents the proton-transfer component for CPET. For MnIV-oxo systems, a multi-state reactivity model inspired the development of significantly more reactive complexes. Weakened equatorial donation to the MnIV-oxo unit results in large rate enhancements for C-H bond oxidation and oxygen-atom transfer reactions. These results demonstrate that the local coordination environment can be rationally changed to enhance reactivity of MnIII-hydroxo and MnIV-oxo adducts.

Iron N-heterocyclic carbene complexes in homogeneous catalysis.

The development of homogeneous iron catalysts has been a prolific research field in recent years. Many catalytic reactions are no longer limited to noble metals. The use of N-heterocyclic carbenes (NHCs) as ancillary ligands has made substantial impact in noble metal catalysis and also started to gain popularity in iron catalysis in recent years. This review article surveys the recent literature on Fe-NHC-catalyzed chemical reactions, including C-C bond formation, reduction, and oxidation reactions.

The Mechanism of Sugar C-H Bond Oxidation by a Flavoprotein Oxidase Occurs by a Hydride Transfer Before Proton Abstraction.

Understanding the reaction mechanism underlying the functionalization of C-H bonds by an enzymatic process is one of the most challenging issues in catalysis. Here, combined approaches using density functional theory (DFT) analysis and transient kinetics were employed to investigate the reaction mechanism of C-H bond oxidation in d-glucose, catalyzed by the enzyme pyranose 2-oxidase (P2O). Unlike the mechanisms that have been conventionally proposed, our findings show that the first step of the C-H bond oxidation reaction is a hydride transfer from the C2 position of d-glucose to N5 of the flavin to generate a protonated ketone sugar intermediate. The proton is then transferred from the protonated ketone intermediate to a conserved residue, His548. The results show for the first time how specific interactions around the sugar binding site promote the hydride transfer and formation of the protonated ketone intermediate. The DFT results are also consistent with experimental results including the enthalpy of activation obtained from Eyring plots, as well as the results of kinetic isotope effect and site-directed mutagenesis studies. The mechanistic model obtained from this work may also be relevant to other reactions of various flavoenzyme oxidases that are generally used as biocatalysts in biotechnology applications.

Copper supported β-cyclodextrin functionalized PEGylated mesoporous silica nanoparticle -graphene oxide hybrid: An efficient and recyclable nano-catalyst for straightforward synthesis of 2-arylbenzimidazoles and 1,2,3-triazoles

β-Cyclodextrin functionalized PEGylated mesoporous silica nanoparticles-graphene oxide hybrid has been introduced as a heterogeneous support for immobilization of copper catalyst (denoted as Cu@βCD-PEG-mesoGO). Mesoporous silica nanoparticles-graphene oxide hybrid (mesoGO) was synthesized and functionalized by PEG600 ended β-cyclodextrin. Then, Cu was immobilized onto the later modified nanoparticles. Cu@βCD-PEG-mesoGO was evaluated for the synthesis of benzimidazoles and 1,2,3-triazoles. The synthesis of 2-aryl benzimidazole derivatives from o-phenylenediamines and benzaldehydes via aerobic C-N bond oxidation reaction was successfully performed using Cu@βCD-PEG-mesoGO as a “green” catalyst. The catalyst was also applied for the synthesis of 1,2,3-triazole derivatives via three component click reaction of alkynes, benzylbromides and sodium azide. The catalyst recovery test was performed, and showed that this catalyst is highly reusable without a significant decrease in its activity. This catalyst has outstanding properties such as high efficiency and turnover frequency (TOF), simple product work-up, utilization of H2O as a green solvent, mild reaction conditions, and easy catalyst recovery.

Total Syntheses of (-)-Majucin and (-)-Jiadifenoxolane A, Complex Majucin-Type Illicium Sesquiterpenes.

We report the first chemical syntheses of both (−)-majucin and (−)-jiadifenoxolane A via 10 net oxidations from the ubiquitous terpene (+)-cedrol. Additionally, this approach allows for access to other majucin-type sesquiterpenes, like (−)-jiadifenolide, (−)-jiadifenin, and (−)-(1R,10S)-2-oxo-3,4-dehydroxyneomajucin (ODNM) along the synthetic pathway. Site-selective aliphatic C(sp3)-H bond oxidation reactions serve as the cornerstone of this work which offers access to highly oxidized natural products from an abundant and renewable terpene feedstock.

Computational analysis of site differences in selective aliphatic C-H hydroxylation by nonheme iron-oxo complexes.

Selective C-H hydroxylation by nonheme iron complexes offers a promising method in the field of organic synthesis. Aliphatic C-H bond oxidation reactions of pivalate (R) catalyzed by [Fe(S,S-PDP)(CH3CN)2]2+ (CAT1) were examined using the density functional theory. Our calculations of the CH3CN solvent agree with the experimental findings. However, it was observed that the gas-phase results did not replicate selective C-H hydroxylation observed experimentally when CAT1 catalyzed hydrocarbon oxidations by H2O2via an HO-FeV[double bond, length as m-dash]O oxidant (CAT1a). We inferred that the difference was mainly from hydrogen bonding formation, (CAT1a) O-HO[double bond, length as m-dash]C (R), in certain gaseous H-abstraction transition states (TSH). Then, the appearance of the stronger (CAT1a) O-HN[triple bond, length as m-dash]CCH3-solvent weakened the aforementioned interaction, leading to C-H activation influenced primarily by their electronic and steric properties. Such a deduction explained the same selective C-H found in both phases of reactions with CAT1b, a cyclic ferric peracetate oxidant, by the reason of TSH without the influence of H-bonding. Another interesting finding was that the commonly recognized radical intermediate was further isomerized by a favorable electron rearrangement. Thus, the subsequent OH-rebound behavior proceeded by an electrostatic interaction. This study provides mechanistic clues for modifying regioselective C-H hydroxylation for molecule synthesis applications.

A cyanine-based near-infrared fluorescent probe for highly sensitive and selective detection of hypochlorous acid and bioimaging

Hypochlorous acid (HOCl) is a kind of reactive oxygen species which plays an important role in biological process. HOCl detection is of great importance in disease prevention and treatment. Herein, a cyanine-based near-infrared (NIR) fluorescent probe for HOCl has been designed and synthesized. This probe can react with HOCl in a dose-response manner along with the fluorescence of the probe quenched, the reaction through an electrophilic addition to the double bond and subsequent oxidation reaction. Experiments indicate that the probe can be acted as a selective and sensitive indicator for HOCl and the limit of detection for HOCl is estimated to be 22nM. What's more, this probe shows a low toxicity to cells and can be applied to visualize HOCl molecules in living cells. Therefore, the proposed method may make a significant contribution to HOCl detection.

Ligand-free palladium-catalyzed facile construction of tetra cyclic dibenzo[b,h][1,6]naphthyridine derivatives: domino sequence of intramolecular C–H bond arylation and oxidation reactions

A ligand-free Pd-catalyzed approach has been developed for the synthesis of dibenzo-fused naphthyridines.

A manganese catalyst for highly reactive yet chemoselective intramolecular C(sp(3))-H amination.

C-H bond oxidation reactions underscore the existing paradigm wherein high reactivity and high selectivity are inversely correlated. The development of catalysts capable of oxidizing strong aliphatic C(sp(3))-H bonds while displaying chemoselectivity (that is, tolerance of more oxidizable functionality) remains an unsolved problem. Here, we describe a catalyst, manganese tert-butylphthalocyanine [Mn((t)BuPc)], that is an outlier to the reactivity-selectivity paradigm. It is unique in its capacity to functionalize all types of C(sp(3))-H bond intramolecularly, while displaying excellent chemoselectivity in the presence of π functionality. Mechanistic studies indicate that [Mn((t)BuPc)] transfers bound nitrenes to C(sp(3))-H bonds via a pathway that lies between concerted C-H insertion, observed with reactive noble metals such as rhodium, and stepwise radical C-H abstraction/rebound, as observed with chemoselective base metals such as iron. Rather than achieving a blending of effects, [Mn((t)BuPc)] aminates even 1° aliphatic and propargylic C-H bonds, demonstrating reactivity and selectivity unusual for previously known catalysts.

Semibullvalene and diazasemibullvalene: recent advances in the synthesis, reaction chemistry, and synthetic applications.

Semibullvalene (SBV) and its aza analogue 2,6-diazasemibullvalene (NSBV) are theoretically interesting and experimentally challenging organic molecules because of four unique features: highly strained ring systems, intramolecular skeletal rearrangement, extremely rapid degenerate (aza-)Cope rearrangement, and the predicted existence of neutral homoaromatic delocalized structures. SBV has received much attention in the past 50 years. In contrast, after NSBV was predicted in 1971 and the first in situ synthesis was realized in 1982, no progress on NSBV chemistry was made until our results in 2012. We have been interested in the reaction chemistry of 1,4-dilithio-1,3-butadienes (dilithio reagents for short), especially for their applications in the synthesis of SBV and NSBV, because (i) the cyclodimerization of dilithio reagents could provide the potential eight-carbon skeleton of SBV from four-carbon butadiene units and (ii) the insertion reaction of dilithio reagents with C≡N bonds of two nitriles could provide a 6C + 2N skeleton that might be a good precursor for the synthesis of NSBV. Therefore, we initiated a journey into the synthesis and reaction chemistry of SBV and NSBV starting from dilithio reagents that has been ongoing since 2006. In this Account, we outline mainly our recent achievements in the synthesis, structural characterization, reaction chemistry, synthetic application, and theoretical/computational analysis of NSBV. Two efficient strategies for the synthesis of NSBV from dilithio reagents and nitriles via oxidant-induced C-N bond formation are described. Structural investigations of NSBV, including X-ray crystal structure analysis, determination of the activation barrier for the aza-Cope rearrangement, and theoretical analysis, show that the localized structure of NSBV is the predominant form and that the homoaromatic delocalized structure exists as a minor component in the equilibrium. We also discuss the reaction chemistry and synthetic applications of NSBV. Several novel reaction patterns have been explored, including thermolysis, C-N bond insertion, rearrangement-cycloaddition, oxidation, and nucleophilic ring-opening reactions. Diverse and interesting N-containing polycyclic skeletons can be constructed, such as nickelaazetidine, 1,5-diazatriquinacenes, and triazabrexadienes, which are not available by other means. Our results show that NSBV not only features a rapid aza-Cope rearrangement with a low activation barrier but also acts as unique synthetic reagent that is significantly different from aziridine. The strained rigid ring systems as a whole can be involved in the reactions. Our achievements highlight two significant advances: (i) the well-established efficient synthesis and isolation of NSBV has greatly accelerated the development of NSBV chemistry, and (ii) the previously unattainable molecules have become "normal" and routine starting materials for the synthesis of otherwise unavailable but interesting structures. We expect that our pursuits will inspire and help direct future chemical and physical research on NSBV.