Bond Exchange Research Articles

Metal‐Ligand Bonds Based Reprogrammable and Re‐Processable Supramolecular Liquid Crystal Elastomer Network

AbstractDynamic covalent bonds endow liquid crystal elastomers (LCEs) with network rearrangeability, facilitating the fixation of mesogen alignment induced by external forces and enabling reversible actuation. In comparison, the bond exchange of supramolecular interactions is typically too significant to stably maintain the programmed alignment, particularly under intensified external stimuli. Nevertheless, remaking and recycling of supramolecular interaction‐based polymer networks are more accessible than those based on dynamic covalent bonds, as the latter are difficult to completely dissociate. Thus, preparing an LCE that possesses both supramolecular‐like exchangeability and covalent bond‐level stability remains a significant challenge. In this work, we addressed this issue by employing metal‐ligand bonds as the crosslinking points of LCE networks. As such, mesogen alignment can be repeatedly encoded through metal‐ligand bond exchange and stably maintained after programming, since the bond exchange rate is sufficiently slow when the programming and actuation temperatures are below the bond dissociation temperature. More importantly, the metal‐ligand bonds can be completely dissociated at high temperatures, allowing the LCE network to be dissolved in a solvent and reshaped into desired geometries via solution casting. Building on these properties, our LCEs can be fabricated into versatile actuators, such as reversible folding origami, artificial muscles, and soft robotics.

A self-healing composite solid electrolyte with dynamic three-dimensional inorganic/organic hybrid network for flexible all-solid-state lithium metal batteries

Composite solid electrolytes (CSEs), which combine the advantages of solid polymer electrolytes and inorganic solid electrolytes, are considered to be promising electrolytes for all-solid-state lithium metal batteries. However, the current CSEs suffer from defects such as poor inorganic/organic interface compatibility, lithium dendrite growth, and easy damage of electrolyte membrane, which hinder the practical application of CSEs. Herein, a CSE (PBHL@LLZTO@DDB) with polyurethane (PBHL) as the polymer matrix and Li6.4La3Zr1.4Ta0.6O12 (LLZTO) modified by silane coupling agent (DDB) as inorganic fillers (LLZTO@DDB) has been prepared. Disulfide bond exchange reactions between PBHL and LLZTO@DDB enable PBHL@LLZTO@DDB to form a dynamic three-dimensional (3D) inorganic/organic hybrid network, which promotes the uniform dispersion of LLZTO in PBHL@LLZTO@DDB, improves the Li+ conductivity (1.24 ± 0.08 × 10−4 S cm−1 at 30 ℃), and broadens the electrochemical stability window (5.16 V vs. Li+/Li). Moreover, a combination of hydrogen bonds and disulfide bonds endows PBHL@LLZTO@DDB with excellent self-healing properties. As such, both all-solid-state symmetric and full cells exhibit excellent cycle performance at ambient temperature. More importantly, the healed PBHL@LLZTO@DDB can almost completely restore its original electrochemical properties, indicating its application potential in flexible electronic products.

Exploiting Lignin Structure and Reactivity to Design Vitrimers with Controlled Ratio of Dynamic to Non-Dynamic Bonds.

Lignin is an abundant biobased feedstock, representing the first source of renewable aromatic structures. Thanks to its high functionality in aliphatic hydroxyls (Al-OH), phenolic hydroxyls (Ph-OH) and carboxylic acids (COOH), lignin is an attractive precursor to crosslinked polymer materials. Different biobased macromolecular architectures can be designed from lignins, whose end-of-life should also be considered in the context of a circular bioeconomy. To enhance recyclability of crosslinked polymer networks, the introduction of dynamic linkages to design vitrimers is a promising strategy. In this study, Kraft lignin was chemically modified with succinic anhydride, to prepare a series of modified lignins with a controlled COOH/Ph-OH ratio, exploiting the difference in reactivity between Al-OH and Ph-OH groups. Upon crosslinking with a diepoxy, mixed vitrimer networks with variable ratios between dynamic ester bonds and non-dynamic ether bonds were synthesized. The analysis of their properties evidenced the impact of the non-dynamic linkages on the materials behaviors, including their dynamicity and reprocessing ability. Although the activation energy for bond exchange is increased, non-dynamic linkages do not hinder the reprocessability of these adaptable materials, and provide them high creep resistance. The controlled introduction of non-dynamic linkages appears as a promising strategy to enhance the properties of lignin-based vitrimers.

Creep and recovery of vitrimers under thermo-chemo-mechanical coupling effects

Reprocessable, repairable, and recyclable (“3R”) vitrimers have experienced rapid development over the past decade and demonstrate significant potential for diverse applications. The creep performance of vitrimers is crucial for their dimensional stability under load-bearing conditions at relatively low temperatures and serves as a key metric for evaluating their reprocessability at high temperatures. However, the impact of dynamic covalent polymer networks (DCPNs) on vitrimer mechanics, particularly creep properties, remains debated. Systematic experimental studies on the creep of vitrimers across a wide temperature range are lacking. We use the classic epoxy vitrimer as a model system to investigate the impact of DCPNs on vitrimer mechanics, especially focusing on the creep and recovery behavior across a wide temperature range, spanning from room temperature to the glass transition temperature (Tg) and further to the topology freezing transition temperature (Tv). We systematically examined the effects of temperature, stress, and catalysts on vitrimer creep, revealing the influence of DCPNs. Our findings demonstrate significant thermo-chemo-mechanical coupling effects in the creep mechanics of vitrimers, a facet not comprehensively acknowledged in existing studies. In addition, at temperatures below Tg, vitrimers exhibit superior creep resistance compared to pure epoxy resin due to metal coordination, ensuring excellent dimensional stability under load-bearing conditions. Conversely, at high temperatures, active bond exchange reactions in vitrimers accelerate creep and result in greater residual deformation, highlighting exceptional reprocessability. This study provides new insights into the materials and mechanics of vitrimers.

Functional Upcycling of Polyurethane Thermosets into Value-Added Thermoplastics via Small-Molecule Carbamate-Assisted Decross-Linking Extrusion.

The cross-linked structures of most commodity polyurethanes (PUs) hinder their recycling by common mechanical/chemical approaches. Catalyzed dynamic carbamate exchange emerges as a promising PU recycling strategy, which converts traditional static PU thermosets into reprocessable covalent adaptable networks (CANs). However, this approach has been limited to thermoset-to-thermoset reprocessing of PU CANs, accompanied by their well-preserved network structures and extremely high viscosities, which pose challenges to processing and certain applications. This study reports a catalytic decross-linking extrusion process aided by small-molecule carbamates, which can upcycle PU thermosets into easily processable and functional PU thermoplastics in a solvent-free and high-throughput manner. Key to this process is the employment of small-molecule carbamates as decross-linkers to simultaneously deconstruct cross-linked PUs and functionalize the decross-linked PU chains, through catalyzed carbamate exchange reactions in a twin-screw extruder. This strategy applies to both aromatic and aliphatic cross-linked PU films and foams, and the amount of small-molecule carbamates required to decross-link PU networks is determined through thermal, chemical, and structural analyses of the resulting extrudates. This approach is generalizable to small-molecule carbamates with various steric/electronic structures and chemical functionalities including methacrylate, anthracene, and stilbene groups. The chain-end functionalization is confirmed by analyzing the purified decross-linked extrudates after dialysis. This thermoset-to-thermoplastic extrusion process represents a powerful approach for upcycling postconsumer PU thermosets into a library of thermoplastic PUs with controlled molecular weights and chain-end functionalities for diverse applications, including adhesives, photoresins, and stimuli-responsive materials, as demonstrated herein. In the future, this strategy could be extended to upcycle many other step-growth networks capable of undergoing catalytic bond exchange reactions, such as cross-linked polyureas and polyesters, contributing to plastic waste management in general.

Critical Role of Free Amine Groups in the Imine Bonds Exchange in Dynamic Covalent Networks

Critical Role of Free Amine Groups in the Imine Bonds Exchange in Dynamic Covalent Networks

Cell-Material Interactions in Covalent Adaptable Thioester Hydrogels.

Covalent adaptable networks (CANs) are polymeric networks with cross-links that can break and reform in response to external stimuli, including pH, shear, and temperature, making them potential materials for use as injectable cell delivery vehicles. In the native niche, cells rearrange the extracellular matrix (ECM) to undergo basic functions including migration, spreading, and proliferation. Bond rearrangement enables these hydrogels to mimic viscoelastic properties of the native ECM which promote migration and delivery from the material to the native tissue. In this work, we characterize thioester CANs to inform their design as effective cell delivery vehicles. Using bulk rheology, we characterize the rearrangement of these networks when they are subjected to strain, which mimics the strain applied by a syringe, and using multiple particle tracking microrheology (MPT) we measure cell-mediated remodeling of the pericellular region. Thioester networks are formed by photopolymerizing 8-arm poly(ethylene glycol) (PEG)-thiol and PEG-thioester norbornene. Bulk rheology measures scaffold properties during low and high strain and demonstrates that thioester scaffolds can recover rheological properties after high strain is applied. We then 3D encapsulated human mesenchymal stem cells (hMSCs) in thioester scaffolds. Using MPT, we characterize degradation in the pericellular region. Encapsulated hMSCs degrade these scaffolds within ≈4 days post-encapsulation. We hypothesize that this degradation is mainly due to cytoskeletal tension that cells apply to the matrix, causing adaptable thioester bonds to rearrange, leading to degradation. To verify this, we inhibited cytoskeletal tension using blebbistatin, a myosin-II inhibitor. Blebbistatin-treated cells can degrade these networks only by secreting enzymes including esterases. Esterases hydrolyze thioester bonds, which generate free thiols, leading to bond exchange. Around treated cells, we measure a decrease in the extent of pericellular degradation. We also compare cell area, eccentricity, and speed of untreated and treated cells. Inhibiting cytoskeletal tension results in significantly smaller cell area, more rounded cells, and lower cell speeds when compared to untreated cells. Overall, this work shows that cytoskeletal tension plays a major role in hMSC-mediated degradation of thioester networks. Cytoskeletal tension is also important for the spreading and motility of hMSCs in these networks. This work informs the design of thioester scaffolds for tissue regeneration and cell delivery.

A Biobased Vitrimer: Self-Healing, Shape Memory, and Recyclability Induced by Dynamic Covalent Bond Exchange.

Plant oil-based vitrimer is an innovative and sustainable polymer with wide-ranging potential applications in the field of advanced materials. However, its restricted application is caused by the poor mechanical properties and the need for catalysts during preparation. Using renewable cardanol as the raw material, epoxy cardanol glycidyl ether (ECGE) with an end epoxide group was obtained by the clicking reaction and epoxidation reaction. After the application of citric acid (CA), ECGE was successfully cured, resulting in the production of fully biobased ECGE-CA vitrimers. This material does not require a catalyst, possesses self-healing properties, and exhibits high mechanical strength. On account of the introduction of hydroxyl groups in citric acid, plenty of hydrogen bonds are formed, allowing the topological network rearrangement of the material in the absence of a catalyst. Recyclable adhesives and repairable materials, vitrimer polymers have good shape memory, self-healing, and recyclability since of their dynamic ester and hydroxyl bonds.

Internal catalysis significantly promotes the bond exchange of covalent adaptable polyurethane networks

Self-healing covalent adaptable networks (CANs) are not only of fundamental interest but also of practical importance for achieving carbon neutrality and sustainable development. However, there is a trade-off between the mobility and cross-linking structure of CANs, making it challenging to develop CANs with excellent mechanical properties and high self-healing efficiency. Here, we report the utilization of a highly dynamic four-arm cross-linking unit with an internally catalyzed oxime-urethane group to obtain CAN-based ionogel with both high self-healing efficiency (>92.1%) at room temperature and superior mechanical properties (tensile strength 4.55 MPa and toughness 13.49 MJ m-3). This work demonstrates the significant potential of utilizing the synergistic electronic, spatial, and topological effects as a design strategy for developing high-performance materials.

Lignin-based vitrimer containing dynamic borate ester bonds with intrinsic photoconversion and excellent photothermal remoldability

The development of photoresponsive shape memory materials based on the photothermal conversion properties of lignin and the low activation energy of the dynamic covalent borate bond is of great importance. In this paper, a kind of lignin-based vitrimer polymer (LBP) containing dynamic boronic ester bonds was prepared by a “sulfhydryl-epoxy” click reaction and etherification reaction. The results show that the rigid segment EP-EL (lignin-based epoxy resin) and BDB (2,2′-(1,4-phenylene)-bis-[4-mercapto-1,3,2-dioxaneborane]) with benzene ring structure can impart tensile strength (20.8 MPa) to the LBP, while the flexible segment PEG imparts good elongation at break (15 %). The dynamic binding and dissociation exchange mechanism of the boronic ester bonds enables LBP to exhibit thermal remodelling properties (up to 36.2 %) and water-assisted self-healing properties at room temperature (up to 49.0 %). In addition, LBP exhibits excellent thermal and light-responsive shape memory properties due to its own photothermal conversion performance (photothermal conversion efficiency up to 18.2 %) and the dynamic boronic ester bond thermal activation bond exchange mechanism. The insulating properties of LBP make it suitable for use in high temperature protection circuit devices and light-responsive circuit devices. This study provides new insights into the design and application of Vitrimer and photoresponsive shape memory polymers, and also offers a new avenue for high-value utilization of lignin.

Photocurable vitrimers with malleable and self-healing trade-off enabled by manipulating dynamic boronic ester bonds

Although numerous strategies refer to dynamic covalent bond exchanges of small molecules for self-repairing thermosets, it remains a critical challenge to be able to jointly tune the malleability and dynamic properties of photocurable materials via extending dynamical small molecule bridging chains with tunable kinetic features. Herein, we successfully synthesized two typical diboronic ester molecules (diboronic ester dithiol/diacid) with variable dioxaborolane metathesis kinetics, which acted as dynamical interlinking segments constructing simple hydrogenated bisphenol A (HBA) epoxy backbone to achieve dynamically cross-linking feature. Subsequently, the acrylate- and anhydride-modified HBA vitrimers bearing diboronic ester-extending segment variants and photocuring traits are successfully synthesized by a one-pot reaction. Consequently, it is demonstrated that the embedded amounts of dynamic diboronic ester bonds in the backbone play a key role in the photopolymerization rate of photocurable vitrimers. The photopolymerization rate decreases significantly as more diboronic ester segments. Moreover, the diboronic ester dithiol-mediated photocurable vitrimer (HBA-S) exhibits enhanced malleability (strain at break of 26.6 %), desirable photo-crosslinked network, and accelerated thermal-triggered self-healing ability (scratch self-healing efficiency of closing to 100 % at 150 °C), compared to those of the diboronic ester diacid-mediated vitrimer (HBA-O) under identical conditions. This work validates the probability of transferring the dioxaborolane metathesis of small molecules to dynamic properties of bulk UV-curing materials, which provides valuable guidance for the rational design and fabrication of tunable dynamic photocurable materials.

UV-Mediated Facile Fabrication of a Robust, Fully Renewable and Controllably Biodegradable Poly(lactic acid)-Based Covalent Adaptable Network.

A robust and fully biobased covalent adaptable network (CAN) that allows recyclability, biocompatibility, and controlled biodegradability is reported. The CAN was fabricated through a simple photo-cross-linking method, wherein low-molecular-weight poly(lactic acid) (∼3 kDa) was modified with end 1,2-dithiolane rings through a one-step Steglich esterification reaction with thioctic acid (TA). These incorporated 1,2-dithiolane rings undergo photoinduced ring-opening polymerization, thus enabling the cross-linking of poly(lactic acid) with abundant dynamic disulfide bonds. The resultant CAN demonstrates excellent transparency, effective UV-blocking capabilities below 320 nm, robust tensile strength (∼39 MPa), and superior dimensional stability at 80 °C, alongside attractive biocompatibility. Moreover, owing to the dynamic exchange and redox-responsiveness of disulfide bonds, the material can be recycled by hot-pressing and a reduction-oxidation process while also being capable of controllably biodegrading at the end of its lifecycle. Furthermore, it exhibits reconfigurable shape memory properties with fast recovery. This study elucidates a straightforward approach to fabricating multifunctional and sustainable polymer materials with potential applications in diverse fields such as packaging, coating, and biomedicine.

Fusion of immiscible covalent adaptable networks rooted in Enamine-One and β-Amino ester bonds with robust mechanically and excellent re-processing properties

Covalent adaptable networks (CANs) are widely used because of their outstanding mechanical properties and reprocessibility. However, these materials can only be recycled with mono-dynamic bonding networks during recovery. Here, we report that fused polymer CANs containing bi-dynamic bonds with adjustable mechanical properties are achieved through the dynamic behavior of the β-amino ester bond and the enamine-one bond. The β-amino ester bond-based CANs (P1) and the enamine-one bond-based CANs (P5) were prepared using tris(2-aminoethyl)amine (TREN) and m-xylylenediamine (MXDA) with hexanediol diacrylate and hexane-1, 6-diyl dipropiolate via click reaction, respectively. The mechanical and thermal properties of the fused films obtained after grinding and mixing at room temperature were comparable to those of CANs containing bi-dynamic bonds obtained by pre-mixing TREN and MXDA. Dynamic exchange and topological bond formation by the β-amino ester and the enamine-one at the interface are shown at the molecular level and with high uniformity. CANs containing bi-dynamic bonds showed synergism in stress relaxation experiments, demonstrating variable activation energies over a range of the temperature window. Owing to their excellent puncture resistance, the prepared materials can be used in flexible devices, energy-storage equipment, and various other applications.

Fabricating epoxy vitrimer with excellent mechanical and dynamic exchange properties via network topology design

Epoxy vitrimers are a novel type of environmentally friendly materials that possess exceptional properties, including self-healing, recyclability, and reprocessability. They offer a solution to the issue of traditional thermosetting epoxy resins, which are not recyclable. However, the incorporation of dynamic bonds typically results in a decrease in mechanical properties. Therefore, achieving a balance between the mechanical properties and dynamic exchange capability is crucial. In this work, a series of epoxy resin systems with various topological network characteristics were prepared by adjusting the proportions of bisphenol A epoxy resin (E51) and polyethylene glycol diglycidyl ether (EGDGE) epoxy resins in combination with a curing agent containing vinylogous urethane (VU) dynamic bonds. Through further study, we found that with the increase of E51 content, the cross-linking density of the network gradually increased, and the flexibility of the macromolecular chains decreased (favorable for enhancing the material's mechanical performance). Simultaneously, the free volume of the network gradually increased, and the tightness of the macromolecular chains decreased (favorable for improving the material's dynamic exchange ability). These two effects combined to make E51-40 exhibit the lowest activation energy for dynamic covalent bond exchange and the lowest topological transition temperature. Compared to E51-0, the tensile strength and glass transition temperature of E51-40 were improved by 22.23 % and 25.30 %, respectively. After remoulding experiment at 140 °C for 1h, the material exhibited a high tensile strength recovery of 91.34 %. Therefore, starting from the design of molecular structure, adjusting the network topology is an effective means to balance the mechanical and dynamic exchange properties of epoxy vitrimers. This provides experimental guidance and theoretical insights for designing high-performance epoxy vitrimer materials.

High-Performance Yet Sustainable Triboelectric Nanogenerator Based on Sulfur-Rich Polymer Composite with MXene Segregated Structure.

State-of-the-art triboelectric nanogenerators (TENGs) typically employ fluoropolymers, highly negative chargeable materials in triboelectric series. However, many researchers nowadays are concerned about environmental pollution caused by poly-and per-fluoroalkyl substances (PFAS) due to their critical immunotoxicity as fluoropolymers are likely to release PFAS into the ecosystem during their life cycle. Herein, a sulfur-rich polymer (SRP)/MXene composite, offering high-performance yet sustainable TENG is developed. Value-addition of sulfur into SRP-based TENG has huge advantages since sulfur is abundant waste from petroleum refining and possesses the highest electron affinity (-200kJmol-1) among polymerizable atoms. MXene segregated structure is introduced into SRP to achieve homogeneous distribution without electrical percolation by utilizing below 0.5wt% of MXene, resulting in a significantly enhanced dielectric constant without a drastic increase of dielectric loss. Due to homogeneous MXene distribution, SRP/MXene composite-based TENG demonstrates 2.9 times and 19.5 times enhances peak voltage and peak current compared to previous SRP-based TENGs. Additionally, it exhibits reusability without critical reduction of modulus and TENG performance due to dynamically exchangeable disulfide bonds. Finally, after the corona discharging and scaling-up process to a 4-inch wafer size, SRP/MXene composite-based TENG exhibits an 8.4 times improvement in peak power density, reaching 3.80Wm-2 compared to previous SRP-based TENGs.

Covalent adaptable polymer networks with CO2-facilitated recyclability

Cross-linked polymers with covalent adaptable networks (CANs) can be reprocessed under external stimuli owing to the exchangeability of dynamic covalent bonds. Optimization of reprocessing conditions is critical since increasing the reprocessing temperature costs more energy and even deteriorates the materials, while reducing the reprocessing temperature via molecular design usually narrows the service temperature range. Exploiting CO2 gas as an external trigger for lowering the reprocessing barrier shows great promise in low sample contamination and environmental friendliness. Herein, we develop a type of CANs incorporated with ionic clusters that achieve CO2-facilitated recyclability without sacrificing performance. The presence of CO2 can facilitate the rearrangement of ionic clusters, thus promoting the exchange of dynamic bonds. The effective stress relaxation and network rearrangement enable the system with rapid recycling under CO2 while retaining excellent mechanical performance in working conditions. This work opens avenues to design recyclable polymer materials with tunable dynamics and responsive recyclability.

The impact of Reserve Bank of India officials' resignations on financial sector returns: An event-study analysis

In this study, we examine the short-term effects of the resignations of high-ranking officials from the Reserve Bank of India (RBI) on financial sector returns. We apply a commonly used event-study method to analyze financial sector stocks during the period from February 16, 2018, to July 22, 2019. The findings reveal that the financial sector was sensitive to the resignations of RBI Governor Urjit Patel and Deputy Governor Viral Acharya, both strong supporters of the RBI's independence. Patel’s resignation caused a significant negative impact on cumulative abnormal returns, while Acharya’s resignation led to a significant positive impact on these returns. Our results suggest that central bank independence (CBI) may have varied short-term effects on financial sector performance. It is, therefore, important for both politicians and investors to understand the implications of our findings in order to fully grasp the political and economic consequences of central bank independence and the credibility of monetary policy on financial sector outcomes. For future research, we suggest exploring the effects of these resignations on other financial indicators, such as bond yields, exchange rates, and interest rates, using alternative methods.

Influence of monomer structure and catalyst concentration on topological transition and dynamic properties of dicarboxylic acid‐epoxy vitrimers

AbstractThis study delineates the dependence of thermophysical behavior of acid‐epoxy vitrimers on their formulation. The stress relaxation due to the bond exchange reaction and the glass transition temperature of acid epoxy vitrimers are investigated, with respect to the influence of catalyst content and acid chain length. This is carried out for a range of dicarboxylic acids and catalyst concentrations formulated and characterized using calorimetry and dynamic mechanical analysis. The influence of acid chain length on the bond exchange rate, topological transition, and glass transition temperatures of the vitrimers is found to be significant. The activation energy of the exchange reaction varies over a wide range from 73 to 104 kJ/mol and the topology freezing temperature from 66 to 136°C with the behavior governed by the interplay between crosslinking density, network flexibility and density and distance of functional groups, with an increase of catalyst concentration leading to lower topological transition temperature and the dependence on chain length showing non‐monotonic behavior. The glass transition decreases by about 30°C as the carbon chain length increases from 6 to 14 carbons due to enhanced monomer flexibility and is not affected by the concentration of catalyst.

3D printing of reprogrammable liquid crystal elastomers with exchangeable boronic ester bonds

Liquid crystal elastomers (LCEs) are a kind of soft actuating materials with large reversible deformation ability, which can work as the “motor” to exhibit complex deformations and drive the locomotion of soft robots. The deformation of LCEs depends on the three-dimensional (3D) shape of whole structure and alignment patterns of mesogens. Various methods have been employed to fabricate the LCE structure with desired shapes and mesogen alignments. However, conventional 3D printed LCEs require continuous thermal energy input to maintain their actuated shapes. The LCEs cannot be reprocessed and reprogrammed once cured. Herein, we introduce dynamic boronic ester bonds into the ink, with which the printed LCE structures are capable of being reprogrammed from polydomain into monodomain state and vice versa. We further explore the effects of printing parameters and content of dynamic covalent bonds on the actuation performance and reprogramming ability. The actuated shape could be well predicted with finite element method. The dynamic printable LCEs developed here offer new strategy and large design space for LCE structures.

Intrinsic Permanent Shape Reconfigurable Semicrystalline Biopolyester Thermoset.

Catalyst-free, volatile organic solvent (VOC)-free synthesis of biobased cross-linked polymers is an important sustainable feature in polyesterification. To date, these polyesters have been extensively studied for their fundamental sustainability across various uses. The ultimate potential sustainability for these materials, however, is constrained to static structural parts due to their intractable rigid three-dimensional (3D) network. Here, we reveal intrinsic dynamic exchangeable bonds within this type of cross-linked semicrystalline network, poly(1,8-octanediol-co-1,12-docanedioate-co-citrate) (PODDC), enabling permanent shape reconfigurability. Annealing at slightly above melting-transition temperature (Tm) allows for shape reconfigurability up to nine times, comparable in performance to the existing bond-exchange systems. No reagents are involved from synthesis to shape reconfiguration, suggesting an exciting feature exhibited by this sustainable cross-linked material without the need for further chemical modification. We further extend this benefit of reconfigurability to enable flexible shape design in a smart shape-memory polymer (SMP), showing it as one of its potential applications. After its applications, it can undergo hydrolytic degradation. We envision that such multifaceted sustainability for the material will attract interest in environmentally friendly applications such as fabricating external part of soft robots and shape-morphing devices with reduced environmental impact.