Body Volume Research Articles

Repurposing Insecticides for Mosquito Control: Evaluating Spiromesifen, a Lipid Synthesis Inhibitor against Aedes aegypti (L.).

The growing resistance of Aedes aegypti (L.) to conventional insecticides presents a major challenge in arbovirus control, necessitating the exploration of alternative insecticidal chemistries. Spiromesifen, derived from spirocyclic tetronic acids, is widely used against agricultural pests and is crucial in resistance management due to its unique lipid synthesis inhibition. This study evaluates the insecticidal activity of spiromesifen against temephos-resistant Ae. aegypti populations, focusing on larval body weight, volume, biochemical composition, and adult female reproductive potential. Spiromesifen demonstrated effective larvicidal activity, significantly reducing adult emergence. Resistance to spiromesifen was not observed, with resistance ratios (RR50, RR90) ranging from 0.36- to 3.31-fold. Larvae exposed to LC50 showed significant reductions in body weight and volume, and reduced carbohydrate, lipid, and protein contents. Enhanced catalase activity and malondialdehyde levels indicated increased oxidative stress and lipid peroxidation, highlighting its effects on lipid metabolism. Spiromesifen also exhibited sterilizing effects, significantly reducing fecundity and fertility in adult females, thereby impacting Ae. aegypti reproductive capacity. These findings highlight the potential of spiromesifen as a component of integrated vector management strategies, especially in regions with prevalent insecticide resistance in Ae. aegypti, serving as an effective larvicide and impacting adult reproductive outcomes.

Prediction of presence and severity of metabolic syndrome using regional body volumes measured by a multisensor white-light 3D scanner and validation using a mobile technology

Abstract Aims To test whether an index based on the combination of demographics and body volumes obtained with a multisensor 3D body volume (3D-BV) scanner and biplane imaging using a mobile application (myBVI®) will reliably predict the severity and presence of metabolic syndrome (MS). Methods and results We enrolled 1280 consecutive subjects who completed study protocol measurements, including 3D-BV and myBVI®. Body volumes and demographics were screened using the least absolute shrinkage and selection operator to select features associated with an MS severity score and prevalence. We randomly selected 80% of the subjects to train the models, and performance was assessed in 20% of the remaining observations and externally validated on 133 volunteers who prospectively underwent myBVI® measurements. The mean ± SD age was 43.7 ± 12.2 years, 63.7% were women, body mass index (BMI) was 28.2 ± 6.2 kg/m2, and 30.2% had MS and an MS severity z-score of −0.2 ± 0.9. Features β coefficients equal to zero were removed from the model, and 14 were included in the final model and used to calculate the body volume index (BVI), demonstrating an area under the receiving operating curve (AUC) of 0.83 in the validation set. The myBVI® cohort had a mean age of 33 ± 10.3 years, 61% of whom were women, 10.5% MS, an average MS severity z-score of −0.8, and an AUC of 0.88. Conclusion The described BVI model was associated with an increased severity and prevalence of MS compared with BMI and waist-to-hip ratio. Validation of the BVI had excellent performance when using myBVI®. This model could serve as a powerful screening tool for identifying MS.

The support of mixed area measures involving a new class of convex bodies

Mixed volumes in n-dimensional Euclidean space are functionals of n-tuples of convex bodies K,L,C1,…,Cn−2. The Alexandrov–Fenchel inequalities are fundamental inequalities between mixed volumes of convex bodies. As very special cases they cover or imply many important inequalities between basic geometric functionals. A complete characterization of the equality cases in the Alexandrov–Fenchel inequality remains a challenging open problem. Major recent progress was made by Yair Shenfeld and Ramon van Handel [13,14], in particular they resolved the problem in the cases where C1,…,Cn−2 are polytopes, zonoids or smooth bodies (under some dimensional restriction). In [6] we introduced the class of polyoids, which are defined as limits of finite Minkowski sums of polytopes having a bounded number vertices. Polyoids encompass polytopes, zonoids and triangle bodies, and they can be characterized by means of generating measures. Based on this characterization and Shenfeld and van Handel's contribution (and under a dimensional restriction), we extended their result to polyoids (or smooth bodies). Our previous result was stated in terms of the support of the mixed area measure associated with the unit ball Bn and C1,…,Cn−2. This characterization result is completed in the present work which more generally provides a geometric description of the support of the mixed area measure of an arbitrary (n−1)-tuple of polyoids (or smooth bodies). The result thus (partially) confirms a long-standing conjecture by Rolf Schneider in the case of polyoids, and hence in particular it covers the case of zonoids and triangle bodies.

Intrafraction Motion in Surface-Guided Breast Radiation Therapy and its Implications on a Single Planning Target Volume Margin Strategy

Background and PurposeThis study quantifies intrafraction motion in surface-guided radiotherapy (SGRT) for breast cancer and considers the need for individualized intrafraction motion measures when calculating Planning Target Volume (PTV) margins. MethodsSGRT was used to assess intrafraction motion in consecutive patients according to (1) site irradiated (whole breast (WB)/chest wall (CW) versus WB/CW + regional lymph nodes) and (2) the use of deep inspiration breath hold (DIBH) versus free-breathing (FB). Intrafraction motion variation was evaluated throughout the treatment course for all cases. Associations between intrafraction motion and patient specific characteristics were explored. The usefulness of individualised intrafraction motion measures for PTV margin determination was considered. Results102 patients undergoing 1360 fractions were included. On a population level, average intrafraction motion was less than 0.4mm and 0.2 degrees for translational and rotational directions, respectively, with 95th percentiles < 1.2mm and 0.6 degrees. No clinically meaningful differences in intrafraction motion were observed according to site irradiated or the use of DIBH. Consistency in intrafraction motion was noted for all patients throughout the treatment course. No clinically meaningful associations were found between intrafraction motion and patient specific characteristics such as age, seroma volume, PTV volume, and mean body volume. ConclusionIntrafractional deviations with SGRT, using manufacturer-recommended ROIs, are minimal, do not vary substantially for different treatment techniques or patient specific characteristics, and remain constant throughout the treatment course. A universal intrafraction motion measure may be sufficient for calculating PTV margins. Further validation studies are needed to evaluate the impact of ROI size and coverage.

Research on the Application of Dynamic Process Correlation Based on Radar Data in Mine Slope Sliding Early Warning.

With the gradual expansion of mining scale in open-pit coal mines, slope safety problems are increasingly diversified and complicated. In order to reduce the potential loss caused by slope sliding and reduce the major threat to the safety of life and property of residents in the mining area, this study selected two mining areas in Xinjiang as cases and focused on the relationship between phase noise and deformation. The study predicts the specific time point of slope sliding by analyzing the dynamic history correlation tangent angle between the two. Firstly, the time series data of the micro-variation monitoring radar are used to obtain the small deformation of the study area by differential InSAR (D-InSAR), and the phase noise is extracted from the radar echo in the sequence data. Then, the volume of the deformation body is calculated by analyzing the small deformation at each time point, and the standard deviation of the phase noise is calculated accordingly. Finally, the sliding time of the deformation body is predicted by combining the tangent angle of the ratio of the volume of the deformation body to the standard deviation of the phase noise. The results show that the maximum deformation rates of the deformation bodies in the studied mining areas reach 10.1 mm/h and 6.65 mm/h, respectively, and the maximum deformation volumes are 2,619,521.74 mm3 and 2,503,794.206 mm3, respectively. The predicted landslide time is earlier than the actual landslide time, which verifies the effectiveness of the proposed method. This prediction method can effectively identify the upcoming sliding events and the characteristics of the slope, provide more accurate and reliable prediction results for the slope monitoring staff, and significantly improve the efficiency of slope monitoring and early warning.

Association of a body shape index with femur bone mineral density among older adults: NHANES 2007-2018.

A body shape index (ABSI) is an abdominal obesity index developed based on epidemiological statistics and high ABSI indicates that waist circumference (WC) is higher than expected for a given height and weight and corresponds to a more central concentration of body volume. The objective of this study was to determine whether there is a linear or nonlinear relationship between ABSI and total femur bone mineral density (BMD) in older Americans and whether the relationship between the ABSI and total femur BMD varies across populations. This cross-sectional study was based on data from the 2007-2018 National Health and Nutrition Examination Survey (NHANES). Weighted multiple linear regression, restricted cubic spline (RCS) curves, subgroup analysis, and interaction tests were used to examine the association between ABSI and total femur BMD. This study included 2505 older adults. This study found a negative linear correlation between ABSI and total femur BMD (β = -3.2, 95%CI: -5.0, -1.4, p < 0.001). When participants were grouped according to quartiles of ABSI, those in the upper quartile had lower total femur BMD compared to those in the bottom quartile of ABSI. This negative association remained consistent across gender, age, education level, smoking, physical activity and BMI subgroups. However, in the diabetes subgroup, ABSI showed a stronger negative association with total femur BMD. The study shows a negative linear association between ABSI and total femur BMD in older Americans, with this negative association being stronger in the diabetic population.

Adaptive radiotherapy for muscle invasive bladder cancer: a retrospective audit of two bladder filling protocols

BackgroundRadical radiotherapy for muscle-invasive bladder cancer (MIBC) is challenging due to large variations in bladder shape, size and volume during treatment, with drinking protocols often employed to mitigate geometric uncertainties. Utilising adaptive radiotherapy together with CBCT imaging to select a treatment plan that best fits the bladder target and reduce normal tissue irradiation is an attractive option to compensate for anatomical changes. The aim of this retrospective study was to compare a bladder empty (BE) protocol to a bladder filling (BF) protocol with regards to variations in target volumes, plan of the day (PoD) selection and plan dosimetry throughout treatment.MethodsForty patients were included in the study; twenty were treated with a BE protocol and twenty with a BF protocol to a total prescribed dose of 55 Gy in 20 fractions. Small, medium and large bladder plans were generated using three different CTV to PTV margins. Bladder (CTV) volumes were delineated on planning CTs and online pre-treatment CBCTs. Differences in CTV volumes throughout treatment, plan selection, PTV volumes and resulting dose metrics were compared for both protocols.ResultsMean bladder volume differed significantly on both the planning CTs and online pre-treatment CBCTs between the protocols (p < 0.05). Significant differences in bladder volumes were observed between the planning CT and pre-treatment CBCTs for BF (p < 0.05) but not for BE (p = 0.11). Both protocols saw a significant decrease in bladder volume between first and final treatment fractions (p < 0.05). Medium plans were preferentially selected for BE whilst when using the BF protocol the small plan was chosen most frequently. With no significant change to PTV coverage between the protocols, the volume of body receiving 25.0–45.8 Gy was found to be significantly smaller for BE patients (p < 0.05).ConclusionsThis work provides evidence in favour of a BE protocol compared to a BF protocol for radical radiotherapy for MIBC. The smaller treatment volumes observed in the BE protocol led to reduced OAR and total body doses and were also observed to be more consistent throughout the treatment course. These results highlight improvements in dosimetry for patients who undergo a BE protocol for MIBC.

Efficacy of Interval Training in Improving Body Composition and Adiposity in Apparently Healthy Adults: An Umbrella Review with Meta-Analysis.

Although the efficacy of interval training for improving body composition has been summarized in an increasing number of systematic reviews in recent years, discrepancies in review findings and conclusions have been observed. This study aims to synthesize the available evidence on the efficacy of interval training compared with moderate-intensity continuous training (MICT) and nonexercise control (CON) in reducing body adiposity in apparently healthy adults. An umbrella review with meta-analysis was performed. A systematic search was conducted in seven databases (MEDLINE, EMBASE, Cochrane Database, CINAHL, Scopus, SPORTDiscus, and Web of Science) up to October 2023. Systematic reviews with meta-analyses of randomized controlled trials (RCTs) comparing interval training and MICT/CON were included. Literature selection, data extraction, and methodological quality assessment (AMSTAR-2) were conducted independently by two reviewers. Meta-analyses were performed using a random-effects model. Subgroup analyses were conducted based on the type of interval training [high-intensity interval training (HIIT) and sprint interval training (SIT)], intervention duration, body mass index, exercise modality, and volume of HIIT protocols. Sixteen systematic reviews, including 79 RCTs and 2474 unique participants, met the inclusion criteria. Most systematic reviews had a critically low (n = 6) or low (n = 6) AMSTAR-2 score. Interval training demonstrated significantly greater reductions in total body fat percent (BF%) compared with MICT [weighted mean difference (WMD) of - 0.77%; 95% confidence interval (CI) - 1.12 to - 0.32%] and CON (WMD of - 1.50%; 95% CI - 2.40 to - 0.58%). Significant reductions in fat mass, visceral adipose tissue, subcutaneous abdominal fat, and android abdominal fat were also observed following interval training compared to CON. Subgroup analyses indicated that both HIIT and SIT resulted in superior BF% loss than MICT. These benefits appeared to be more prominent in individuals with overweight/obesity and longer duration interventions (≥ 12weeks), as well as in protocols using cycling as a modality and low-volume HIIT (i.e., < 15min of high-intensity exercise per session). This novel umbrella review with large-scale meta-analysis provides an updated synthesis of evidence with implications for physical activity guideline recommendations. The findings support interval training as a viable exercise strategy for reducing adiposity in the general population.

Об элементных фундаментах опор высоковольтных линий

Purpose: to substantiate the possibility of using the foundations of supports of high-voltage lines in the form of dispersed horizontal elements combined into a single structure for the perception of alternating loads. To determine by experimental and computational methods the effect of the mutual displacement of elements in the form of an increase in the bearing capacity of foundations and a decrease in their deformations under the influence of pressing and pulling loads. To show the possibility of replacing slab foundations of supports of high-voltage lines with structures made of prefabricated elements to reduce the volume and weight of products transported from the factory. Methods: application of the moire photogrammetric method to assess the development of soil compaction zones and angular deformations of the soil base in a tray with a glass wall under models of slab and elemental foundations. Using the method of boundary integral equations to obtain the dependence of precipitation on the step of elements for flexible and rigid foundations. Results: the effect of mutual influence of foundation elements during their convergence and dispersal in the form of a change in the stress-strain state in their base is illustrated. Differences in the depths of the distribution of compaction zones and areas of development of angular deformations are revealed. Quantitative data on the precipitation of slab and elemental foundations and the influence of the depth of the roof of the solid underlying layer on them have been obtained. Graphical dependences of the relationship of sediment elements with the distance (step) between them are presented. The effect of the division of the foundation on the rate of extinction of marginal tangential stresses in the base is shown. An illustration is made of an increase in the volume and surface area of the bulging body of the elemental foundation, which leads to an increase in its bearing capacity compared to the slab one when calculating for pulling out. Practical importance: the effectiveness of the use of an element foundation in comparison with the paid option in reducing the parameters of the stress-strain state of the base and facilitating logistical tasks during construction is shown. The experimental and computational methods used can be recommended for further refinement of the parameters of the elemental foundations.

The usefulness of total body protein mass models for adolescent athletes.

The present study aimed to assess the utility of a less laborious technique for estimating total body protein (TBPro) in young athletes, using a multicomponent model as the criterion method. A total of 88 (49 boys and 39 girls) adolescent athletes (age: 15.2 ± 1.5 years; body mass index: 21.2 ± 2.7 kg/m2) participated. A 6-compartment model was used as the reference method (TBProReference) involving air displacement plethysmography for body volume, dual-energy X-ray absorptiometry (DXA) for bone mineral content, and deuterium dilution for total body water (TBW). Alternatively, DXA TBPro models were used as TBPro = lean-soft mass (LSM) - HFFFM × fat-free mass (FFM) - Ms. - G, where LSM and FFM were assessed using DXA, HFFFM is the hydration fraction of the FFM using measured TBW or assumed TBW (adult fraction of 0.732; Lohman's constants or mean observed HFFFM), Ms. is soft tissue minerals (Ms = 0.0129 × HFFFM × FFM), and G is glycogen calculated as 0.044 × (LSM - HFFFM × FFM - Ms). The maturation level was determined by self-assessment. TBPro obtained from DXA using the assumed HFFFM explained 73% to 77% of the variance compared to TBProReference. Meanwhile, using the mean values of measured HFFFM, the DXA model explained 53 and 36% for boys and girls, respectively. Larger bias (8.6% for boys and 25.8% for girls) and limits of agreement were found for the DXA model using measured HFFFM (boys for 66.9% and girls for 70%) compared to an assumed HFFFM (bias ranged from 1.5% to 22.5% and limits of agreement ranged from 31.3% to 35.3%). Less complex and demanding TBPro DXA models with the assumed HFFFM are valid alternatives for assessing this relevant FFM component in groups of adolescent athletes but are less accurate for individual results. Though future studies should be conducted to test the usefulness of these models in longitudinal and experimental designs, their potential to provide an estimation of protein mass after exercise and diet interventions in young athletes is anticipated.

Benefit of range uncertainty reduction in robust optimisation for proton therapy of brain, head-and-neck and breast cancer patients

Background and PurposeThe primary cause of range uncertainty in proton therapy is inaccuracy in estimating the stopping-power ratio from computed tomography. This study examined the impact on dose-volume metrics by reducing range uncertainty in robust optimisation for a diverse patient cohort and determined the level of range uncertainty that resulted in a relevant reduction in doses to organs-at-risk (OARs). Materials and MethodsThe effect of reducing range uncertainty on OAR doses was evaluated by robustly optimising six proton plans with varying range uncertainty levels (ranging from 3.5% in the original plan to 1.0%), keeping setup uncertainty fixed. All plans used the initial clinical treatment plan’s beam directions and optimisation objectives and were optimised until a clinically acceptable plan was achieved across all setup and range scenarios. The effect of reduced range uncertainty on dose-volume metrics for OARs near the target was evaluated. This study included 30 brain cancer patients, as well as five head-and-neck and five breast cancer patients, investigating the relevance of reducing range uncertainty when different setup uncertainties were used. ResultsLowering range uncertainty slightly reduced the nominal dose to surrounding tissue. For body volume receiving 80% of the prescribed dose, reducing range uncertainty from 3.5% to 2.0% resulted in a median decrease of 4 cm3 for the brain, 17 cm3 for head-and-neck, and 27 cm3 for breast cancer patients. ConclusionsReducing range uncertainty in robust optimisation showed a reduction in dose to OARs. The clinical relevance depends on the affected organs and the clinical dose constraints.

The volume of an isocanted cube is a determinant*

In any dimension d ≥ 2 , we give exact volume formulas of two mutually polar dual convex d-polytopes. The primal body is called isocanted cube of dimension d, depending on two real parameters 0 < a < ℓ . The limit case a = 0 yields a d-cube of edge-length ℓ. We prove that the volume of such a body is the determinant of the matrix of order d having diagonal entries equal to ℓ and a elsewhere. We also compute the volume of the polar dual body, getting a rational expression in ℓ , a , homogeneous of degree − d with rational coefficients. Isocanted cubes are origin-symmetric zonotopes. Zonoids (defined as the limits of families of zonotopes) satisfy the Mahler conjecture; in particular, zonotopes do. Nonetheless, we confirm (by elementary methods) that the Mahler conjecture holds for isocanted cubes.

Association of effective dose to immune cells and vertebral marrow dose with hematologic toxicity during neoadjuvant chemoradiotherapy in esophageal squamous cell carcinoma

BackgroundTo explore the correlation between effective dose to immune cells (EDIC) and vertebral bone marrow dose and hematologic toxicity (HT) for esophageal squamous cell carcinoma (ESCC) during neoadjuvant chemoradiotherapy (nCRT).MethodsThe study included 106 ESCC patients treated with nCRT. We collected dosimetric parameters, including vertebral body volumes receiving 10–40 Gy (V10, V20, V30, V40) and EDIC and complete blood counts. Associations of the cell nadir and dosimetric parameters were examined by linear and logistic regression analysis. The receiver operating characteristic (ROC) curves were used to determine the cutoff values for the dosimetric parameters.ResultsDuring nCRT, the incidence of grade 3–4 lymphopenia, leukopenia, and neutropenia was 76.4%, 37.3%, and 37.3%, respectively. Patients with EDIC ≤ 4.63 Gy plus V10 ≤ 140.3 ml were strongly associated with lower risk of grade 3–4 lymphopenia (OR, 0.050; P < 0.001), and patients with EDIC ≤ 4.53 Gy plus V10 ≤ 100.9 ml were strongly associated with lower risk of grade 3–4 leukopenia (OR, 0.177; P = 0.011), and patients with EDIC ≤ 5.79 Gy were strongly associated with lower risk of grade 3–4 neutropenia (OR, 0.401; P = 0.031). Kaplan-Meier analysis showed that there was a significant difference among all groups for grade 3–4 lymphopenia, leukopenia, and neutropenia (P < 0.05).ConclusionThe dose of vertebral bone marrow irradiation and EDIC were significantly correlated with grade 3–4 leukopenia and lymphopenia, and EDIC was significantly correlated with grade 3–4 neutropenia. Reducing vertebral bone marrow irradiation and EDIC effectively reduce the incidence of HT.

Effect of Dry Mix Alkali Activated Slag Binder Composite Properties Cured in Ambient Condition

&lt;p&gt;A dry mix (solution-free) alkali-activated slag (a primary cementitious material) and/or fly ash based binder composition is developed that can be cast in-site and consequently cured at ambient temperature. Mortar specimens were cast by mixing slag and or fly ash, river sand, powder form alkaline activators (NaOH 14M, varying solids percentage of Na2SiO3) and water were thoroughly mixed in fabricated equipment. The dry density (28 days) of all specimens showed greater than 2200 kg/m3. The compressive strength (28 days) of all mixes was resulted in higher than 40 N/mm2. Among all the four mixes, a mix F103 with 90% slag, 10% fly ash, 30% Na2SiO3 and 14M NaOH at 3, 7 and 28 days curing showed overall higher compressive strength. It is due to fewer solids content of Na2SiO3. The experimental results indicated that solution free studied binder composite can be developed under ambient conditions eliminating other curing types without compromising in the strength. The studied sustainable mixes require only 12-15 percent water which is less compared to regular used mixes. Thus reduced water quantities can be achieved thereby protects the reduction in volume of water bodies, environment hazards, reduces CO2 emissions due to use of industrial by-products as main binders.&lt;/p&gt;

Postmortem changes in the eye on computed tomography images

BackgroundOcular tension decreases with increasing postmortem interval (PMI) and eyes collapse with extreme progression of postmortem change; however, time-related changes in postmortem computed tomography (PMCT) findings have not been clarified. This study aimed to quantitatively evaluate the vitreous volume and CT values of the vitreous body to clarify time-related changes in PMCT. MethodsWe retrospectively reviewed PMCT images of the eyes of subjects who underwent autopsy at our institution between July 2023 and February 2024. They were classified into four PMI groups: PMI-1: < 1 day, PMI-2: 1–2 days, PMI-3: 3–6 days, PMI-4: ≥ 7 days. The vitreous volumes and mean CT values of the vitreous chambers were measured. Additionally, the presence of intraocular gas and crystalline lens dislocation was observed. ResultsThe PMCT images of 131 eyes of 66 patients (41 males, 25 females) were analyzed. The mean age was 63.7 (22–99) years. The volume of the vitreous cavity was significantly decreased at PMI-3 and PMI-4, which indicated scleral depression. Intraocular gas appeared in PMI-4. Lens dislocation began at PMI-3 and was more frequently observed at PMI-4 and in the higher-temperature environment group. ConclusionOcular findings on PMCT are useful for estimating the time of death.

A Geodetically Constrained Petrogenetic Model for Evolved Lavas from the January 1997 Fissure Eruption of Kīlauea Volcano

Abstract Magmatic systems below volcanoes are often dominated by partially crystalline magma over the long term. Rejuvenation of these systems during eruptive events can impact lava composition and eruption style—sometimes resulting in more violent or explosive activity than would be expected, as was the case at Fissure 17 during Kīlauea’s 2018 eruption. Here, we explore how the crystallinity of unerupted intrusion magmas affect hybrid magma compositions and petrological signatures by constructing phase-equilibria models to evaluate mineral and melt compositions of low-MgO lavas erupted along the East Rift Zone of Kīlauea volcano on 30 to 31 January 1997 (Episode 54, Fissures A-F). We then compare calculated mixing proportions and petrologically derived magma volumes to GPS-based geodetic inversions of ground deformation and intrusion growth in an attempt to reconcile geodetic and petrologically estimated magma volumes. Open-system phase-equilibria thermodynamic models were used to constrain the composition, degree of differentiation, and thermodynamic state of a rift-stored, two pyroxene + plagioclase saturated low-MgO magma body immediately preceding its mixing with high-MgO recharge and degassed drainback (lava lake) magma from Pu‘u‘ō‘ō‘, shortly before fissure activity within Nāpau Crater began on 29 January 1997. Mixing models constructed using the Magma Chamber Simulator reproduce the mineralogy and compositions of Episode 54 lavas within uncertainties and suggest that the identity of the low-MgO magma body may be either variably differentiated remnants of un-erupted magmas intruded into Nāpau Crater in October 1968, or another spatially and compositionally similar magma body. We find that magmas derived from a single, compositionally stratified magma emplaced beneath Nāpau Crater in 1968 can mix with mafic Kīlauea magmas to reproduce average Episode 54 bulk lava, mineralogy and mineral compositions without necessitating the interaction of multiple, low-MgO rift-stored magma bodies to produce Episode 54 lava compositions. Further, by constructing phase equilibria-based mixing models of Episode 54, we can better define the pre-eruptive state of the magmatic system. The resultant mineral assemblages and compositions are consistent with the possibility that the now-fractionated, rift-stored magma body was compositionally stratified and ~ 40% to 50% crystalline at the time of mixing. Finally, we estimate the volume of the low-MgO magma body to be ~7.51 Mm3. Phase-equilibria model results corroborate field and geochemical relationships demonstrating how shallow intrusions at intraplate shield volcanoes can crystallize, evolve, and then be remobilized by new, later batches of mafic magma. Most notably, our MCS models demonstrate that the pre-eruptive conditions of an intrusive body may be recovered by examining mineral compositions within mixed lavas. Discrepancies between the geodetic constraints on volumes of stored rift versus newly intruded (recharge) magma and our best-fit results produced by MCS mixing models (which respectively are mmafic:mlow-MgO ≈ 2 vs. mmafic:mlow-MgO ≈ 0.75) are interpreted to highlight the complex nature of incomplete mixing on more localized scales as reflected in erupted lavas, compared to geodetically constrained volumes that likely reflect large spatial scale contributions to a magmatic system. These dissimilar volume relationships may also help to constrain eruptive versus unerupted volumes in magmatic systems undergoing mixing. By demonstrating the usefulness of MCS in modeling past eruptions, we highlight the potential to use it as a tool to aid in petrologic monitoring of ongoing activity.

The Fetal Spleen in Low-Risk Pregnancies and prior to Preterm Birth: Observational Study of the Role of Anatomical and Functional Magnetic Resonance Imaging

Introduction: Spontaneous preterm birth complicates ∼7% of pregnancies and causes morbidity and mortality. Although infection is a common etiology, our understanding of the fetal immune system in vivo is limited. This study aimed to utilize T2-weighted imaging and T2* relaxometry (which is a proxy of tissue oxygenation) of the fetal spleen in uncomplicated pregnancies and in fetuses that were subsequently delivered spontaneously prior to 32 weeks. Methods: Women underwent imaging including T2-weighted fetal body images and multi-eco gradient echo single-shot echo planar sequences on a Phillips Achieva 3T system. Previously described postprocessing techniques were applied to obtain T2- and T2*-weighted imaging of the fetal spleen and T2-weighted fetal body volumes. Results: Among 55 women with uncomplicated pregnancies, an increase in fetal splenic volume, splenic:body volume, and a decrease in splenic T2* signal intensity was demonstrated across gestation. Compared to controls, fetuses who were subsequently delivered prior to 32 weeks’ gestation (n = 19) had a larger spleen when controlled for the overall size of the fetus (p = 0.027), but T2* was consistent (p = 0.76). Conclusion: These findings provide evidence of a replicable method of studying the fetal immune system and give novel results on the impact of impending preterm birth on the spleen. While T2* decreases prior to preterm birth in other organs, preservation demonstrated here suggests preferential sparing of the spleen.

Reproducibility of Air Displacement Plethysmography in Term and Preterm Infants-A Study to Enhance Body Composition Analysis in Clinical Routine.

The quality-initiative analysis of weekly duplicate PEAPOD® body composition measurements was conducted from clinical practice (January to September 2021) on preterm and term infants without respiratory support. Statistical analysis, including regression analysis, Bland-Altman plots and cv-root-mean-square tests, was performed. A total of 188 duplicate (376 individual) measurements were collected from 119 infants (88 preterm, 31 term). The median absolute difference between duplicates was 31.5 g for fat-free mass (FFM). Linear correlation analysis showed R2 = 0.97 for FFM. The absolute differences in FFM and fat mass did not significantly correlate with increasing age. The %FFM differed (p = 0.02) across body weight groups of 1 kg < BW ≤ 2 kg (1.8%; IQR: 0.8, 3.6) and BW > 3 kg (0.9%; IQR: 0.3, 2.1). The median absolute differences were 1 g (IQR: 0.4, 3.1) for body weight and 5.6 mL (IQR: 2.1, 11.8) for body volume. Body volume estimation is charged with a constant absolute error, which is the main factor for differences between repeated body composition assessments. This error becomes more prominent in infants with lower body weights. Nevertheless, reproducibility of weekly PEAPOD testing is sufficient to monitor body compartment changes, offering a foundation for nutritional decisions in both preterm and term infants.

ANALYSIS OF THE DEVELOPMENT OF GONDOLA CAR BODY STRUCTURES

The article is devoted to the analysis of promising directions for the development of gondola car body structures. It considers the history of the emergence of gondola cars as a separate type of railway rolling stock. The authors systemise the design of gondola cars and discuss the advantages and disadvantages of various designs. The study has shown that the manufacture of the two-axle gondola cars began in the second half of the 19th century. They were designed mainly for transporting coal and iron ore, with their bodies made of wood. Further design improvement led to the appearance of four-axle gondola cars with increased load capacity. Rolled metal began to be used in body structures to improve strength. Particular attention in the article goes to analysing the results of innovative design and technological solutions intended to enhance the efficiency and reliability of body structures. The research indicates that attempts to replace steel with aluminium alloys in manufacturing bodies did not yield results. The reason is the high cost of aluminium and the labour-intensive manufacturing. A promising direction is the use of low-alloy steels 10KhSND and 10KhNDP. For many years, there has been a trend in the railcar-building industry toward producing higher-load gondola cars. It requires increasing the axle load to 25 tons. However, implementing such cars necessitates a substantial restructuring of the railway infrastructure. We consider the design features of innovative domestic gondola cars in detail. The latest technical solutions for the body frame, efficient materials, and components with improved performance have doubled the overhaul mileage. The article analyses the North American experience of gondola car construction and operation. It shows that some models of American gondola cars use longitudinal cylindrical boxes to increase the body volume and reduce the car’s centre of mass. They are on both sides of the girder beam and occupy the space between the carts. Aluminium alloys are also widely used: the frame and lower part of the body are steel, and the side and end walls are aluminium alloy. Keywords: gondola car, body, girder beam, pivot beam, side walls, hatch cover, reliability.

Design of Wearable Textile Electrodes for the Monitorization of Patients with Heart Failure.

Heart failure is a severe medical condition with an important worldwide incidence that occurs when the heart is unable to efficiently pump the patient's blood throughout the body. The monitoring of edema in the lower limbs is one of the most efficient ways to control the evolution of the condition. Impedance spectroscopy has been proposed as an efficient technique to monitor body volume in patients with heart failure. It is necessary to research new wearable devices for remote patient monitoring, which can be easily worn by patients in a continuous way. In this work, we design and implement new wearable textile electrodes for the monitoring of edema evolution in patients with heart failure. Impedance spectroscopy measurements were carried out in 5 healthy controls and 2 patients with heart failure using our wearable electrodes for 3 days. The results show the appropriateness of impedance spectroscopy and our wearable electrodes to monitor body volume evolution. Impedance spectroscopy is shown to be an efficient marker of the presence of edema in heart failure patients. Initial patient positive feedback was obtained for the use of the wearable device.